linuxdebug/arch/arm/boot/dts/am335x-netcom-plus-2xx.dts

240 lines
4.2 KiB
Plaintext

// SPDX-License-Identifier: GPL-2.0-only
/*
* Copyright (C) 2012 Texas Instruments Incorporated - https://www.ti.com/
*/
/*
* VScom OnRISC
* http://www.vscom.de
*/
/dts-v1/;
#include "am335x-baltos.dtsi"
#include "am335x-baltos-leds.dtsi"
/ {
model = "NetCom Plus";
};
&am33xx_pinmux {
uart1_pins: pinmux_uart1_pins {
pinctrl-single,pins = <
AM33XX_PADCONF(AM335X_PIN_UART1_RXD, PIN_INPUT, MUX_MODE0) /* RX */
AM33XX_PADCONF(AM335X_PIN_UART1_TXD, PIN_INPUT, MUX_MODE0) /* TX */
AM33XX_PADCONF(AM335X_PIN_UART1_CTSN, PIN_INPUT_PULLDOWN, MUX_MODE0) /* CTS */
AM33XX_PADCONF(AM335X_PIN_UART1_RTSN, PIN_OUTPUT_PULLDOWN, MUX_MODE0) /* RTS */
AM33XX_PADCONF(AM335X_PIN_LCD_VSYNC, PIN_OUTPUT_PULLDOWN, MUX_MODE7) /* DTR */
AM33XX_PADCONF(AM335X_PIN_LCD_HSYNC, PIN_INPUT_PULLDOWN, MUX_MODE7) /* DSR */
AM33XX_PADCONF(AM335X_PIN_LCD_PCLK, PIN_INPUT_PULLDOWN, MUX_MODE7) /* DCD */
AM33XX_PADCONF(AM335X_PIN_LCD_AC_BIAS_EN, PIN_INPUT_PULLDOWN, MUX_MODE7) /* RI */
>;
};
uart2_pins: pinmux_uart2_pins {
pinctrl-single,pins = <
AM33XX_PADCONF(AM335X_PIN_SPI0_SCLK, PIN_INPUT, MUX_MODE1) /* RX */
AM33XX_PADCONF(AM335X_PIN_SPI0_D0, PIN_OUTPUT, MUX_MODE1) /* TX */
AM33XX_PADCONF(AM335X_PIN_I2C0_SDA, PIN_INPUT_PULLDOWN, MUX_MODE2) /* CTS */
AM33XX_PADCONF(AM335X_PIN_I2C0_SCL, PIN_OUTPUT_PULLDOWN, MUX_MODE2) /* RTS */
AM33XX_PADCONF(AM335X_PIN_GPMC_AD12, PIN_OUTPUT_PULLDOWN, MUX_MODE7) /* DTR */
AM33XX_PADCONF(AM335X_PIN_GPMC_AD13, PIN_INPUT_PULLDOWN, MUX_MODE7) /* DSR */
AM33XX_PADCONF(AM335X_PIN_GPMC_AD14, PIN_INPUT_PULLDOWN, MUX_MODE7) /* DCD */
AM33XX_PADCONF(AM335X_PIN_GPMC_AD15, PIN_INPUT_PULLDOWN, MUX_MODE7) /* RI */
>;
};
};
&usb0_phy {
status = "okay";
};
&usb0 {
status = "okay";
dr_mode = "host";
};
&uart1 {
pinctrl-names = "default";
pinctrl-0 = <&uart1_pins>;
dtr-gpios = <&gpio2 22 GPIO_ACTIVE_LOW>;
dsr-gpios = <&gpio2 23 GPIO_ACTIVE_LOW>;
dcd-gpios = <&gpio2 24 GPIO_ACTIVE_LOW>;
rng-gpios = <&gpio2 25 GPIO_ACTIVE_LOW>;
status = "okay";
};
&uart2 {
pinctrl-names = "default";
pinctrl-0 = <&uart2_pins>;
dtr-gpios = <&gpio1 12 GPIO_ACTIVE_LOW>;
dsr-gpios = <&gpio1 13 GPIO_ACTIVE_LOW>;
dcd-gpios = <&gpio1 14 GPIO_ACTIVE_LOW>;
rng-gpios = <&gpio1 15 GPIO_ACTIVE_LOW>;
status = "okay";
};
&davinci_mdio_sw {
phy0: ethernet-phy@0 {
reg = <1>;
};
};
&cpsw_port1 {
phy-mode = "rmii";
ti,dual-emac-pvid = <1>;
phy-handle = <&phy0>;
};
&cpsw_port2 {
phy-mode = "rgmii-id";
ti,dual-emac-pvid = <2>;
phy-handle = <&phy1>;
};
&gpio0 {
gpio-line-names =
"MDIO",
"MDC",
"UART2_RX",
"UART2_TX",
"I2C1_SDA",
"I2C1_SCL",
"NC",
"NC",
"NC",
"NC",
"NC",
"NC",
"UART1_CTSN",
"UART1_RTSN",
"UART1_RX",
"UART1_TX",
"onrisc:blue:wlan",
"onrisc:green:app",
"USB0_DRVVBUS",
"ETH2_INT",
"NC",
"NC",
"MMC1_DAT0",
"MMC1_DAT1",
"NC",
"NC",
"MMC1_DAT2",
"MMC1_DAT3",
"NC",
"NC",
"GPMC_WAIT0",
"GPMC_WP_N";
};
&gpio1 {
gpio-line-names =
"GPMC_AD0",
"GPMC_AD1",
"GPMC_AD2",
"GPMC_AD3",
"GPMC_AD4",
"GPMC_AD5",
"GPMC_AD6",
"GPMC_AD7",
"NC",
"NC",
"CONSOLE_RX",
"CONSOLE_TX",
"UART2_DTR",
"UART2_DSR",
"UART2_DCD",
"UART2_RI",
"RGMII2_TCTL",
"RGMII2_RCTL",
"RGMII2_TD3",
"RGMII2_TD2",
"RGMII2_TD1",
"RGMII2_TD0",
"RGMII2_TCLK",
"RGMII2_RCLK",
"RGMII2_RD3",
"RGMII2_RD2",
"RGMII2_RD1",
"RGMII2_RD0",
"PMIC_INT1",
"GPMC_CSN0_Flash",
"MMC1_CLK",
"MMC1_CMD";
};
&gpio2 {
gpio-line-names =
"GPMC_CSN3_BUS",
"GPMC_CLK",
"GPMC_ADVN_ALE",
"GPMC_OEN_RE_N",
"GPMC_WE_N",
"GPMC_BEN0_CLE",
"NC",
"NC",
"NC",
"NC",
"NC",
"NC",
"NC",
"NC",
"NC",
"NC",
"NC",
"NC",
"SW2_0",
"SW2_1",
"NC",
"NC",
"UART1_DTR",
"UART1_DSR",
"UART1_DCD",
"UART1_RI",
"MMC0_DAT3",
"MMC0_DAT2",
"MMC0_DAT1",
"MMC0_DAT0",
"MMC0_CLK",
"MMC0_CMD";
};
&gpio3 {
gpio-line-names =
"onrisc:red:power",
"NC",
"NC",
"NC",
"NC",
"UART2_CTSN",
"UART2_RTSN",
"WLAN_IRQ",
"WLAN_EN",
"SW2_2",
"SW2_3",
"NC",
"NC",
"NC",
"ModeA0",
"ModeA1",
"ModeA2",
"ModeA3",
"NC",
"NC",
"NC",
"NC",
"NC",
"NC",
"NC",
"NC",
"NC",
"NC",
"NC",
"NC",
"NC",
"NC";
};