linuxdebug/arch/powerpc/boot/dts/fsl/p1022rdk.dts

189 lines
4.7 KiB
Plaintext
Raw Permalink Normal View History

2024-07-16 15:50:57 +02:00
/*
* P1022 RDK 32-bit Physical Address Map Device Tree Source
*
* Copyright 2012 Freescale Semiconductor Inc.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions are met:
* * Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* * Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in the
* documentation and/or other materials provided with the distribution.
* * Neither the name of Freescale Semiconductor nor the
* names of its contributors may be used to endorse or promote products
* derived from this software without specific prior written permission.
*
*
* ALTERNATIVELY, this software may be distributed under the terms of the
* GNU General Public License ("GPL") as published by the Free Software
* Foundation, either version 2 of that License or (at your option) any
* later version.
*
* THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor "AS IS" AND ANY
* EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
* WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
* DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
* DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
* (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
* LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
* ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
* (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
* SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
*/
/include/ "p1022si-pre.dtsi"
/ {
model = "fsl,P1022RDK";
compatible = "fsl,P1022RDK";
memory {
device_type = "memory";
};
board_lbc: lbc: localbus@ffe05000 {
/* The P1022 RDK does not have any localbus devices */
status = "disabled";
};
board_soc: soc: soc@ffe00000 {
ranges = <0x0 0x0 0xffe00000 0x100000>;
i2c@3100 {
wm8960:codec@1a {
compatible = "wlf,wm8960";
reg = <0x1a>;
/* MCLK source is a stand-alone oscillator */
clock-frequency = <12288000>;
};
rtc@68 {
compatible = "st,m41t62";
reg = <0x68>;
};
adt7461@4c{
compatible = "adi,adt7461";
reg = <0x4c>;
};
zl6100@21{
compatible = "isil,zl6100";
reg = <0x21>;
};
zl6100@24{
compatible = "isil,zl6100";
reg = <0x24>;
};
zl6100@26{
compatible = "isil,zl6100";
reg = <0x26>;
};
zl6100@29{
compatible = "isil,zl6100";
reg = <0x29>;
};
};
spi@7000 {
flash@0 {
#address-cells = <1>;
#size-cells = <1>;
compatible = "spansion,m25p80", "jedec,spi-nor";
reg = <0>;
spi-max-frequency = <1000000>;
partition@0 {
label = "full-spi-flash";
reg = <0x00000000 0x00100000>;
};
};
};
ssi@15000 {
fsl,mode = "i2s-slave";
codec-handle = <&wm8960>;
};
usb@22000 {
phy_type = "ulpi";
};
usb@23000 {
phy_type = "ulpi";
};
mdio@24000 {
phy0: ethernet-phy@0 {
interrupts = <3 1 0 0>;
reg = <0x1>;
};
phy1: ethernet-phy@1 {
interrupts = <9 1 0 0>;
reg = <0x2>;
};
};
mdio@25000 {
tbi0: tbi-phy@11 {
reg = <0x11>;
device_type = "tbi-phy";
};
};
ethernet@b0000 {
phy-handle = <&phy0>;
phy-connection-type = "rgmii-id";
};
ethernet@b1000 {
phy-handle = <&phy1>;
tbi-handle = <&tbi0>;
phy-connection-type = "sgmii";
};
};
pci0: pcie@ffe09000 {
ranges = <0x2000000 0x0 0xe0000000 0 0xa0000000 0x0 0x20000000
0x1000000 0x0 0x00000000 0 0xffc10000 0x0 0x10000>;
reg = <0x0 0xffe09000 0 0x1000>;
pcie@0 {
ranges = <0x2000000 0x0 0xe0000000
0x2000000 0x0 0xe0000000
0x0 0x20000000
0x1000000 0x0 0x0
0x1000000 0x0 0x0
0x0 0x100000>;
};
};
pci1: pcie@ffe0a000 {
ranges = <0x2000000 0x0 0xe0000000 0 0xc0000000 0x0 0x20000000
0x1000000 0x0 0x00000000 0 0xffc20000 0x0 0x10000>;
reg = <0 0xffe0a000 0 0x1000>;
pcie@0 {
ranges = <0x2000000 0x0 0xe0000000
0x2000000 0x0 0xe0000000
0x0 0x20000000
0x1000000 0x0 0x0
0x1000000 0x0 0x0
0x0 0x100000>;
};
};
pci2: pcie@ffe0b000 {
ranges = <0x2000000 0x0 0xe0000000 0 0x80000000 0x0 0x20000000
0x1000000 0x0 0x00000000 0 0xffc00000 0x0 0x10000>;
reg = <0 0xffe0b000 0 0x1000>;
pcie@0 {
ranges = <0x2000000 0x0 0xe0000000
0x2000000 0x0 0xe0000000
0x0 0x20000000
0x1000000 0x0 0x0
0x1000000 0x0 0x0
0x0 0x100000>;
};
};
};
/include/ "p1022si-post.dtsi"