nils.hoelscher
/
llvm-for-llvmta
1
0
Fork 0
Code Issues Pull Requests Projects Releases Wiki Activity
llvm-for-llvmta/include/llvm/CodeGen/ISDOpcodes.h

1386 lines
57 KiB
C++
Raw Blame History

//===-- llvm/CodeGen/ISDOpcodes.h - CodeGen opcodes -------------*- C++ -*-===//
//
// Part of the LLVM Project, under the Apache License v2.0 with LLVM Exceptions.
// See https://llvm.org/LICENSE.txt for license information.
// SPDX-License-Identifier: Apache-2.0 WITH LLVM-exception
//
//===----------------------------------------------------------------------===//
//
// This file declares codegen opcodes and related utilities.
//
//===----------------------------------------------------------------------===//
#ifndef LLVM_CODEGEN_ISDOPCODES_H
#define LLVM_CODEGEN_ISDOPCODES_H
#include "llvm/CodeGen/ValueTypes.h"
namespace llvm {
/// ISD namespace - This namespace contains an enum which represents all of the
/// SelectionDAG node types and value types.
///
namespace ISD {
//===--------------------------------------------------------------------===//
/// ISD::NodeType enum - This enum defines the target-independent operators
/// for a SelectionDAG.
///
/// Targets may also define target-dependent operator codes for SDNodes. For
/// example, on x86, these are the enum values in the X86ISD namespace.
/// Targets should aim to use target-independent operators to model their
/// instruction sets as much as possible, and only use target-dependent
/// operators when they have special requirements.
///
/// Finally, during and after selection proper, SNodes may use special
/// operator codes that correspond directly with MachineInstr opcodes. These
/// are used to represent selected instructions. See the isMachineOpcode()
/// and getMachineOpcode() member functions of SDNode.
///
enum NodeType {
/// DELETED_NODE - This is an illegal value that is used to catch
/// errors. This opcode is not a legal opcode for any node.
DELETED_NODE,
/// EntryToken - This is the marker used to indicate the start of a region.
EntryToken,
/// TokenFactor - This node takes multiple tokens as input and produces a
/// single token result. This is used to represent the fact that the operand
/// operators are independent of each other.
TokenFactor,
/// AssertSext, AssertZext - These nodes record if a register contains a
/// value that has already been zero or sign extended from a narrower type.
/// These nodes take two operands. The first is the node that has already
/// been extended, and the second is a value type node indicating the width
/// of the extension
AssertSext,
AssertZext,
AssertAlign,
/// Various leaf nodes.
BasicBlock,
VALUETYPE,
CONDCODE,
Register,
RegisterMask,
Constant,
ConstantFP,
GlobalAddress,
GlobalTLSAddress,
FrameIndex,
JumpTable,
ConstantPool,
ExternalSymbol,
BlockAddress,
/// The address of the GOT
GLOBAL_OFFSET_TABLE,
/// FRAMEADDR, RETURNADDR - These nodes represent llvm.frameaddress and
/// llvm.returnaddress on the DAG. These nodes take one operand, the index
/// of the frame or return address to return. An index of zero corresponds
/// to the current function's frame or return address, an index of one to
/// the parent's frame or return address, and so on.
FRAMEADDR,
RETURNADDR,
/// ADDROFRETURNADDR - Represents the llvm.addressofreturnaddress intrinsic.
/// This node takes no operand, returns a target-specific pointer to the
/// place in the stack frame where the return address of the current
/// function is stored.
ADDROFRETURNADDR,
/// SPONENTRY - Represents the llvm.sponentry intrinsic. Takes no argument
/// and returns the stack pointer value at the entry of the current
/// function calling this intrinsic.
SPONENTRY,
/// LOCAL_RECOVER - Represents the llvm.localrecover intrinsic.
/// Materializes the offset from the local object pointer of another
/// function to a particular local object passed to llvm.localescape. The
/// operand is the MCSymbol label used to represent this offset, since
/// typically the offset is not known until after code generation of the
/// parent.
LOCAL_RECOVER,
/// READ_REGISTER, WRITE_REGISTER - This node represents llvm.register on
/// the DAG, which implements the named register global variables extension.
READ_REGISTER,
WRITE_REGISTER,
/// FRAME_TO_ARGS_OFFSET - This node represents offset from frame pointer to
/// first (possible) on-stack argument. This is needed for correct stack
/// adjustment during unwind.
FRAME_TO_ARGS_OFFSET,
/// EH_DWARF_CFA - This node represents the pointer to the DWARF Canonical
/// Frame Address (CFA), generally the value of the stack pointer at the
/// call site in the previous frame.
EH_DWARF_CFA,
/// OUTCHAIN = EH_RETURN(INCHAIN, OFFSET, HANDLER) - This node represents
/// 'eh_return' gcc dwarf builtin, which is used to return from
/// exception. The general meaning is: adjust stack by OFFSET and pass
/// execution to HANDLER. Many platform-related details also :)
EH_RETURN,
/// RESULT, OUTCHAIN = EH_SJLJ_SETJMP(INCHAIN, buffer)
/// This corresponds to the eh.sjlj.setjmp intrinsic.
/// It takes an input chain and a pointer to the jump buffer as inputs
/// and returns an outchain.
EH_SJLJ_SETJMP,
/// OUTCHAIN = EH_SJLJ_LONGJMP(INCHAIN, buffer)
/// This corresponds to the eh.sjlj.longjmp intrinsic.
/// It takes an input chain and a pointer to the jump buffer as inputs
/// and returns an outchain.
EH_SJLJ_LONGJMP,
/// OUTCHAIN = EH_SJLJ_SETUP_DISPATCH(INCHAIN)
/// The target initializes the dispatch table here.
EH_SJLJ_SETUP_DISPATCH,
/// TargetConstant* - Like Constant*, but the DAG does not do any folding,
/// simplification, or lowering of the constant. They are used for constants
/// which are known to fit in the immediate fields of their users, or for
/// carrying magic numbers which are not values which need to be
/// materialized in registers.
TargetConstant,
TargetConstantFP,
/// TargetGlobalAddress - Like GlobalAddress, but the DAG does no folding or
/// anything else with this node, and this is valid in the target-specific
/// dag, turning into a GlobalAddress operand.
TargetGlobalAddress,
TargetGlobalTLSAddress,
TargetFrameIndex,
TargetJumpTable,
TargetConstantPool,
TargetExternalSymbol,
TargetBlockAddress,
MCSymbol,
/// TargetIndex - Like a constant pool entry, but with completely
/// target-dependent semantics. Holds target flags, a 32-bit index, and a
/// 64-bit index. Targets can use this however they like.
TargetIndex,
/// RESULT = INTRINSIC_WO_CHAIN(INTRINSICID, arg1, arg2, ...)
/// This node represents a target intrinsic function with no side effects.
/// The first operand is the ID number of the intrinsic from the
/// llvm::Intrinsic namespace. The operands to the intrinsic follow. The
/// node returns the result of the intrinsic.
INTRINSIC_WO_CHAIN,
/// RESULT,OUTCHAIN = INTRINSIC_W_CHAIN(INCHAIN, INTRINSICID, arg1, ...)
/// This node represents a target intrinsic function with side effects that
/// returns a result. The first operand is a chain pointer. The second is
/// the ID number of the intrinsic from the llvm::Intrinsic namespace. The
/// operands to the intrinsic follow. The node has two results, the result
/// of the intrinsic and an output chain.
INTRINSIC_W_CHAIN,
/// OUTCHAIN = INTRINSIC_VOID(INCHAIN, INTRINSICID, arg1, arg2, ...)
/// This node represents a target intrinsic function with side effects that
/// does not return a result. The first operand is a chain pointer. The
/// second is the ID number of the intrinsic from the llvm::Intrinsic
/// namespace. The operands to the intrinsic follow.
INTRINSIC_VOID,
/// CopyToReg - This node has three operands: a chain, a register number to
/// set to this value, and a value.
CopyToReg,
/// CopyFromReg - This node indicates that the input value is a virtual or
/// physical register that is defined outside of the scope of this
/// SelectionDAG. The register is available from the RegisterSDNode object.
CopyFromReg,
/// UNDEF - An undefined node.
UNDEF,
// FREEZE - FREEZE(VAL) returns an arbitrary value if VAL is UNDEF (or
// is evaluated to UNDEF), or returns VAL otherwise. Note that each
// read of UNDEF can yield different value, but FREEZE(UNDEF) cannot.
FREEZE,
/// EXTRACT_ELEMENT - This is used to get the lower or upper (determined by
/// a Constant, which is required to be operand #1) half of the integer or
/// float value specified as operand #0. This is only for use before
/// legalization, for values that will be broken into multiple registers.
EXTRACT_ELEMENT,
/// BUILD_PAIR - This is the opposite of EXTRACT_ELEMENT in some ways.
/// Given two values of the same integer value type, this produces a value
/// twice as big. Like EXTRACT_ELEMENT, this can only be used before
/// legalization. The lower part of the composite value should be in
/// element 0 and the upper part should be in element 1.
BUILD_PAIR,
/// MERGE_VALUES - This node takes multiple discrete operands and returns
/// them all as its individual results. This nodes has exactly the same
/// number of inputs and outputs. This node is useful for some pieces of the
/// code generator that want to think about a single node with multiple
/// results, not multiple nodes.
MERGE_VALUES,
/// Simple integer binary arithmetic operators.
ADD,
SUB,
MUL,
SDIV,
UDIV,
SREM,
UREM,
/// SMUL_LOHI/UMUL_LOHI - Multiply two integers of type iN, producing
/// a signed/unsigned value of type i[2*N], and return the full value as
/// two results, each of type iN.
SMUL_LOHI,
UMUL_LOHI,
/// SDIVREM/UDIVREM - Divide two integers and produce both a quotient and
/// remainder result.
SDIVREM,
UDIVREM,
/// CARRY_FALSE - This node is used when folding other nodes,
/// like ADDC/SUBC, which indicate the carry result is always false.
CARRY_FALSE,
/// Carry-setting nodes for multiple precision addition and subtraction.
/// These nodes take two operands of the same value type, and produce two
/// results. The first result is the normal add or sub result, the second
/// result is the carry flag result.
/// FIXME: These nodes are deprecated in favor of ADDCARRY and SUBCARRY.
/// They are kept around for now to provide a smooth transition path
/// toward the use of ADDCARRY/SUBCARRY and will eventually be removed.
ADDC,
SUBC,
/// Carry-using nodes for multiple precision addition and subtraction. These
/// nodes take three operands: The first two are the normal lhs and rhs to
/// the add or sub, and the third is the input carry flag. These nodes
/// produce two results; the normal result of the add or sub, and the output
/// carry flag. These nodes both read and write a carry flag to allow them
/// to them to be chained together for add and sub of arbitrarily large
/// values.
ADDE,
SUBE,
/// Carry-using nodes for multiple precision addition and subtraction.
/// These nodes take three operands: The first two are the normal lhs and
/// rhs to the add or sub, and the third is a boolean indicating if there
/// is an incoming carry. These nodes produce two results: the normal
/// result of the add or sub, and the output carry so they can be chained
/// together. The use of this opcode is preferable to adde/sube if the
/// target supports it, as the carry is a regular value rather than a
/// glue, which allows further optimisation.
ADDCARRY,
SUBCARRY,
/// Carry-using overflow-aware nodes for multiple precision addition and
/// subtraction. These nodes take three operands: The first two are normal lhs
/// and rhs to the add or sub, and the third is a boolean indicating if there
/// is an incoming carry. They produce two results: the normal result of the
/// add or sub, and a boolean that indicates if an overflow occured (*not*
/// flag, because it may be a store to memory, etc.). If the type of the
/// boolean is not i1 then the high bits conform to getBooleanContents.
SADDO_CARRY,
SSUBO_CARRY,
/// RESULT, BOOL = [SU]ADDO(LHS, RHS) - Overflow-aware nodes for addition.
/// These nodes take two operands: the normal LHS and RHS to the add. They
/// produce two results: the normal result of the add, and a boolean that
/// indicates if an overflow occurred (*not* a flag, because it may be store
/// to memory, etc.). If the type of the boolean is not i1 then the high
/// bits conform to getBooleanContents.
/// These nodes are generated from llvm.[su]add.with.overflow intrinsics.
SADDO,
UADDO,
/// Same for subtraction.
SSUBO,
USUBO,
/// Same for multiplication.
SMULO,
UMULO,
/// RESULT = [US]ADDSAT(LHS, RHS) - Perform saturation addition on 2
/// integers with the same bit width (W). If the true value of LHS + RHS
/// exceeds the largest value that can be represented by W bits, the
/// resulting value is this maximum value. Otherwise, if this value is less
/// than the smallest value that can be represented by W bits, the
/// resulting value is this minimum value.
SADDSAT,
UADDSAT,
/// RESULT = [US]SUBSAT(LHS, RHS) - Perform saturation subtraction on 2
/// integers with the same bit width (W). If the true value of LHS - RHS
/// exceeds the largest value that can be represented by W bits, the
/// resulting value is this maximum value. Otherwise, if this value is less
/// than the smallest value that can be represented by W bits, the
/// resulting value is this minimum value.
SSUBSAT,
USUBSAT,
/// RESULT = [US]SHLSAT(LHS, RHS) - Perform saturation left shift. The first
/// operand is the value to be shifted, and the second argument is the amount
/// to shift by. Both must be integers of the same bit width (W). If the true
/// value of LHS << RHS exceeds the largest value that can be represented by
/// W bits, the resulting value is this maximum value, Otherwise, if this
/// value is less than the smallest value that can be represented by W bits,
/// the resulting value is this minimum value.
SSHLSAT,
USHLSAT,
/// RESULT = [US]MULFIX(LHS, RHS, SCALE) - Perform fixed point multiplication
/// on
/// 2 integers with the same width and scale. SCALE represents the scale of
/// both operands as fixed point numbers. This SCALE parameter must be a
/// constant integer. A scale of zero is effectively performing
/// multiplication on 2 integers.
SMULFIX,
UMULFIX,
/// Same as the corresponding unsaturated fixed point instructions, but the
/// result is clamped between the min and max values representable by the
/// bits of the first 2 operands.
SMULFIXSAT,
UMULFIXSAT,
/// RESULT = [US]DIVFIX(LHS, RHS, SCALE) - Perform fixed point division on
/// 2 integers with the same width and scale. SCALE represents the scale
/// of both operands as fixed point numbers. This SCALE parameter must be a
/// constant integer.
SDIVFIX,
UDIVFIX,
/// Same as the corresponding unsaturated fixed point instructions, but the
/// result is clamped between the min and max values representable by the
/// bits of the first 2 operands.
SDIVFIXSAT,
UDIVFIXSAT,
/// Simple binary floating point operators.
FADD,
FSUB,
FMUL,
FDIV,
FREM,
/// Constrained versions of the binary floating point operators.
/// These will be lowered to the simple operators before final selection.
/// They are used to limit optimizations while the DAG is being
/// optimized.
STRICT_FADD,
STRICT_FSUB,
STRICT_FMUL,
STRICT_FDIV,
STRICT_FREM,
STRICT_FMA,
/// Constrained versions of libm-equivalent floating point intrinsics.
/// These will be lowered to the equivalent non-constrained pseudo-op
/// (or expanded to the equivalent library call) before final selection.
/// They are used to limit optimizations while the DAG is being optimized.
STRICT_FSQRT,
STRICT_FPOW,
STRICT_FPOWI,
STRICT_FSIN,
STRICT_FCOS,
STRICT_FEXP,
STRICT_FEXP2,
STRICT_FLOG,
STRICT_FLOG10,
STRICT_FLOG2,
STRICT_FRINT,
STRICT_FNEARBYINT,
STRICT_FMAXNUM,
STRICT_FMINNUM,
STRICT_FCEIL,
STRICT_FFLOOR,
STRICT_FROUND,
STRICT_FROUNDEVEN,
STRICT_FTRUNC,
STRICT_LROUND,
STRICT_LLROUND,
STRICT_LRINT,
STRICT_LLRINT,
STRICT_FMAXIMUM,
STRICT_FMINIMUM,
/// STRICT_FP_TO_[US]INT - Convert a floating point value to a signed or
/// unsigned integer. These have the same semantics as fptosi and fptoui
/// in IR.
/// They are used to limit optimizations while the DAG is being optimized.
STRICT_FP_TO_SINT,
STRICT_FP_TO_UINT,
/// STRICT_[US]INT_TO_FP - Convert a signed or unsigned integer to
/// a floating point value. These have the same semantics as sitofp and
/// uitofp in IR.
/// They are used to limit optimizations while the DAG is being optimized.
STRICT_SINT_TO_FP,
STRICT_UINT_TO_FP,
/// X = STRICT_FP_ROUND(Y, TRUNC) - Rounding 'Y' from a larger floating
/// point type down to the precision of the destination VT. TRUNC is a
/// flag, which is always an integer that is zero or one. If TRUNC is 0,
/// this is a normal rounding, if it is 1, this FP_ROUND is known to not
/// change the value of Y.
///
/// The TRUNC = 1 case is used in cases where we know that the value will
/// not be modified by the node, because Y is not using any of the extra
/// precision of source type. This allows certain transformations like
/// STRICT_FP_EXTEND(STRICT_FP_ROUND(X,1)) -> X which are not safe for
/// STRICT_FP_EXTEND(STRICT_FP_ROUND(X,0)) because the extra bits aren't
/// removed.
/// It is used to limit optimizations while the DAG is being optimized.
STRICT_FP_ROUND,
/// X = STRICT_FP_EXTEND(Y) - Extend a smaller FP type into a larger FP
/// type.
/// It is used to limit optimizations while the DAG is being optimized.
STRICT_FP_EXTEND,
/// STRICT_FSETCC/STRICT_FSETCCS - Constrained versions of SETCC, used
/// for floating-point operands only. STRICT_FSETCC performs a quiet
/// comparison operation, while STRICT_FSETCCS performs a signaling
/// comparison operation.
STRICT_FSETCC,
STRICT_FSETCCS,
/// FMA - Perform a * b + c with no intermediate rounding step.
FMA,
/// FMAD - Perform a * b + c, while getting the same result as the
/// separately rounded operations.
FMAD,
/// FCOPYSIGN(X, Y) - Return the value of X with the sign of Y. NOTE: This
/// DAG node does not require that X and Y have the same type, just that
/// they are both floating point. X and the result must have the same type.
/// FCOPYSIGN(f32, f64) is allowed.
FCOPYSIGN,
/// INT = FGETSIGN(FP) - Return the sign bit of the specified floating point
/// value as an integer 0/1 value.
FGETSIGN,
/// Returns platform specific canonical encoding of a floating point number.
FCANONICALIZE,
/// BUILD_VECTOR(ELT0, ELT1, ELT2, ELT3,...) - Return a fixed-width vector
/// with the specified, possibly variable, elements. The types of the
/// operands must match the vector element type, except that integer types
/// are allowed to be larger than the element type, in which case the
/// operands are implicitly truncated. The types of the operands must all
/// be the same.
BUILD_VECTOR,
/// INSERT_VECTOR_ELT(VECTOR, VAL, IDX) - Returns VECTOR with the element
/// at IDX replaced with VAL. If the type of VAL is larger than the vector
/// element type then VAL is truncated before replacement.
///
/// If VECTOR is a scalable vector, then IDX may be larger than the minimum
/// vector width. IDX is not first scaled by the runtime scaling factor of
/// VECTOR.
INSERT_VECTOR_ELT,
/// EXTRACT_VECTOR_ELT(VECTOR, IDX) - Returns a single element from VECTOR
/// identified by the (potentially variable) element number IDX. If the return
/// type is an integer type larger than the element type of the vector, the
/// result is extended to the width of the return type. In that case, the high
/// bits are undefined.
///
/// If VECTOR is a scalable vector, then IDX may be larger than the minimum
/// vector width. IDX is not first scaled by the runtime scaling factor of
/// VECTOR.
EXTRACT_VECTOR_ELT,
/// CONCAT_VECTORS(VECTOR0, VECTOR1, ...) - Given a number of values of
/// vector type with the same length and element type, this produces a
/// concatenated vector result value, with length equal to the sum of the
/// lengths of the input vectors. If VECTOR0 is a fixed-width vector, then
/// VECTOR1..VECTORN must all be fixed-width vectors. Similarly, if VECTOR0
/// is a scalable vector, then VECTOR1..VECTORN must all be scalable vectors.
CONCAT_VECTORS,
/// INSERT_SUBVECTOR(VECTOR1, VECTOR2, IDX) - Returns a vector with VECTOR2
/// inserted into VECTOR1. IDX represents the starting element number at which
/// VECTOR2 will be inserted. IDX must be a constant multiple of T's known
/// minimum vector length. Let the type of VECTOR2 be T, then if T is a
/// scalable vector, IDX is first scaled by the runtime scaling factor of T.
/// The elements of VECTOR1 starting at IDX are overwritten with VECTOR2.
/// Elements IDX through (IDX + num_elements(T) - 1) must be valid VECTOR1
/// indices. If this condition cannot be determined statically but is false at
/// runtime, then the result vector is undefined.
///
/// This operation supports inserting a fixed-width vector into a scalable
/// vector, but not the other way around.
INSERT_SUBVECTOR,
/// EXTRACT_SUBVECTOR(VECTOR, IDX) - Returns a subvector from VECTOR.
/// Let the result type be T, then IDX represents the starting element number
/// from which a subvector of type T is extracted. IDX must be a constant
/// multiple of T's known minimum vector length. If T is a scalable vector,
/// IDX is first scaled by the runtime scaling factor of T. Elements IDX
/// through (IDX + num_elements(T) - 1) must be valid VECTOR indices. If this
/// condition cannot be determined statically but is false at runtime, then
/// the result vector is undefined. The IDX parameter must be a vector index
/// constant type, which for most targets will be an integer pointer type.
///
/// This operation supports extracting a fixed-width vector from a scalable
/// vector, but not the other way around.
EXTRACT_SUBVECTOR,
/// VECTOR_SHUFFLE(VEC1, VEC2) - Returns a vector, of the same type as
/// VEC1/VEC2. A VECTOR_SHUFFLE node also contains an array of constant int
/// values that indicate which value (or undef) each result element will
/// get. These constant ints are accessible through the
/// ShuffleVectorSDNode class. This is quite similar to the Altivec
/// 'vperm' instruction, except that the indices must be constants and are
/// in terms of the element size of VEC1/VEC2, not in terms of bytes.
VECTOR_SHUFFLE,
/// SCALAR_TO_VECTOR(VAL) - This represents the operation of loading a
/// scalar value into element 0 of the resultant vector type. The top
/// elements 1 to N-1 of the N-element vector are undefined. The type
/// of the operand must match the vector element type, except when they
/// are integer types. In this case the operand is allowed to be wider
/// than the vector element type, and is implicitly truncated to it.
SCALAR_TO_VECTOR,
/// SPLAT_VECTOR(VAL) - Returns a vector with the scalar value VAL
/// duplicated in all lanes. The type of the operand must match the vector
/// element type, except when they are integer types. In this case the
/// operand is allowed to be wider than the vector element type, and is
/// implicitly truncated to it.
SPLAT_VECTOR,
/// MULHU/MULHS - Multiply high - Multiply two integers of type iN,
/// producing an unsigned/signed value of type i[2*N], then return the top
/// part.
MULHU,
MULHS,
/// [US]{MIN/MAX} - Binary minimum or maximum or signed or unsigned
/// integers.
SMIN,
SMAX,
UMIN,
UMAX,
/// Bitwise operators - logical and, logical or, logical xor.
AND,
OR,
XOR,
/// ABS - Determine the unsigned absolute value of a signed integer value of
/// the same bitwidth.
/// Note: A value of INT_MIN will return INT_MIN, no saturation or overflow
/// is performed.
ABS,
/// Shift and rotation operations. After legalization, the type of the
/// shift amount is known to be TLI.getShiftAmountTy(). Before legalization
/// the shift amount can be any type, but care must be taken to ensure it is
/// large enough. TLI.getShiftAmountTy() is i8 on some targets, but before
/// legalization, types like i1024 can occur and i8 doesn't have enough bits
/// to represent the shift amount.
/// When the 1st operand is a vector, the shift amount must be in the same
/// type. (TLI.getShiftAmountTy() will return the same type when the input
/// type is a vector.)
/// For rotates and funnel shifts, the shift amount is treated as an unsigned
/// amount modulo the element size of the first operand.
///
/// Funnel 'double' shifts take 3 operands, 2 inputs and the shift amount.
/// fshl(X,Y,Z): (X << (Z % BW)) | (Y >> (BW - (Z % BW)))
/// fshr(X,Y,Z): (X << (BW - (Z % BW))) | (Y >> (Z % BW))
SHL,
SRA,
SRL,
ROTL,
ROTR,
FSHL,
FSHR,
/// Byte Swap and Counting operators.
BSWAP,
CTTZ,
CTLZ,
CTPOP,
BITREVERSE,
PARITY,
/// Bit counting operators with an undefined result for zero inputs.
CTTZ_ZERO_UNDEF,
CTLZ_ZERO_UNDEF,
/// Select(COND, TRUEVAL, FALSEVAL). If the type of the boolean COND is not
/// i1 then the high bits must conform to getBooleanContents.
SELECT,
/// Select with a vector condition (op #0) and two vector operands (ops #1
/// and #2), returning a vector result. All vectors have the same length.
/// Much like the scalar select and setcc, each bit in the condition selects
/// whether the corresponding result element is taken from op #1 or op #2.
/// At first, the VSELECT condition is of vXi1 type. Later, targets may
/// change the condition type in order to match the VSELECT node using a
/// pattern. The condition follows the BooleanContent format of the target.
VSELECT,
/// Select with condition operator - This selects between a true value and
/// a false value (ops #2 and #3) based on the boolean result of comparing
/// the lhs and rhs (ops #0 and #1) of a conditional expression with the
/// condition code in op #4, a CondCodeSDNode.
SELECT_CC,
/// SetCC operator - This evaluates to a true value iff the condition is
/// true. If the result value type is not i1 then the high bits conform
/// to getBooleanContents. The operands to this are the left and right
/// operands to compare (ops #0, and #1) and the condition code to compare
/// them with (op #2) as a CondCodeSDNode. If the operands are vector types
/// then the result type must also be a vector type.
SETCC,
/// Like SetCC, ops #0 and #1 are the LHS and RHS operands to compare, but
/// op #2 is a boolean indicating if there is an incoming carry. This
/// operator checks the result of "LHS - RHS - Carry", and can be used to
/// compare two wide integers:
/// (setcccarry lhshi rhshi (subcarry lhslo rhslo) cc).
/// Only valid for integers.
SETCCCARRY,
/// SHL_PARTS/SRA_PARTS/SRL_PARTS - These operators are used for expanded
/// integer shift operations. The operation ordering is:
/// [Lo,Hi] = op [LoLHS,HiLHS], Amt
SHL_PARTS,
SRA_PARTS,
SRL_PARTS,
/// Conversion operators. These are all single input single output
/// operations. For all of these, the result type must be strictly
/// wider or narrower (depending on the operation) than the source
/// type.
/// SIGN_EXTEND - Used for integer types, replicating the sign bit
/// into new bits.
SIGN_EXTEND,
/// ZERO_EXTEND - Used for integer types, zeroing the new bits.
ZERO_EXTEND,
/// ANY_EXTEND - Used for integer types. The high bits are undefined.
ANY_EXTEND,
/// TRUNCATE - Completely drop the high bits.
TRUNCATE,
/// [SU]INT_TO_FP - These operators convert integers (whose interpreted sign
/// depends on the first letter) to floating point.
SINT_TO_FP,
UINT_TO_FP,
/// SIGN_EXTEND_INREG - This operator atomically performs a SHL/SRA pair to
/// sign extend a small value in a large integer register (e.g. sign
/// extending the low 8 bits of a 32-bit register to fill the top 24 bits
/// with the 7th bit). The size of the smaller type is indicated by the 1th
/// operand, a ValueType node.
SIGN_EXTEND_INREG,
/// ANY_EXTEND_VECTOR_INREG(Vector) - This operator represents an
/// in-register any-extension of the low lanes of an integer vector. The
/// result type must have fewer elements than the operand type, and those
/// elements must be larger integer types such that the total size of the
/// operand type is less than or equal to the size of the result type. Each
/// of the low operand elements is any-extended into the corresponding,
/// wider result elements with the high bits becoming undef.
/// NOTE: The type legalizer prefers to make the operand and result size
/// the same to allow expansion to shuffle vector during op legalization.
ANY_EXTEND_VECTOR_INREG,
/// SIGN_EXTEND_VECTOR_INREG(Vector) - This operator represents an
/// in-register sign-extension of the low lanes of an integer vector. The
/// result type must have fewer elements than the operand type, and those
/// elements must be larger integer types such that the total size of the
/// operand type is less than or equal to the size of the result type. Each
/// of the low operand elements is sign-extended into the corresponding,
/// wider result elements.
/// NOTE: The type legalizer prefers to make the operand and result size
/// the same to allow expansion to shuffle vector during op legalization.
SIGN_EXTEND_VECTOR_INREG,
/// ZERO_EXTEND_VECTOR_INREG(Vector) - This operator represents an
/// in-register zero-extension of the low lanes of an integer vector. The
/// result type must have fewer elements than the operand type, and those
/// elements must be larger integer types such that the total size of the
/// operand type is less than or equal to the size of the result type. Each
/// of the low operand elements is zero-extended into the corresponding,
/// wider result elements.
/// NOTE: The type legalizer prefers to make the operand and result size
/// the same to allow expansion to shuffle vector during op legalization.
ZERO_EXTEND_VECTOR_INREG,
/// FP_TO_[US]INT - Convert a floating point value to a signed or unsigned
/// integer. These have the same semantics as fptosi and fptoui in IR. If
/// the FP value cannot fit in the integer type, the results are undefined.
FP_TO_SINT,
FP_TO_UINT,
/// FP_TO_[US]INT_SAT - Convert floating point value in operand 0 to a
/// signed or unsigned integer type with the bit width given in operand 1 with
/// the following semantics:
///
/// * If the value is NaN, zero is returned.
/// * If the value is larger/smaller than the largest/smallest integer,
/// the largest/smallest integer is returned (saturation).
/// * Otherwise the result of rounding the value towards zero is returned.
///
/// The width given in operand 1 must be equal to, or smaller than, the scalar
/// result type width. It may end up being smaller than the result witdh as a
/// result of integer type legalization.
FP_TO_SINT_SAT,
FP_TO_UINT_SAT,
/// X = FP_ROUND(Y, TRUNC) - Rounding 'Y' from a larger floating point type
/// down to the precision of the destination VT. TRUNC is a flag, which is
/// always an integer that is zero or one. If TRUNC is 0, this is a
/// normal rounding, if it is 1, this FP_ROUND is known to not change the
/// value of Y.
///
/// The TRUNC = 1 case is used in cases where we know that the value will
/// not be modified by the node, because Y is not using any of the extra
/// precision of source type. This allows certain transformations like
/// FP_EXTEND(FP_ROUND(X,1)) -> X which are not safe for
/// FP_EXTEND(FP_ROUND(X,0)) because the extra bits aren't removed.
FP_ROUND,
/// FLT_ROUNDS_ - Returns current rounding mode:
/// -1 Undefined
/// 0 Round to 0
/// 1 Round to nearest
/// 2 Round to +inf
/// 3 Round to -inf
/// Result is rounding mode and chain. Input is a chain.
FLT_ROUNDS_,
/// X = FP_EXTEND(Y) - Extend a smaller FP type into a larger FP type.
FP_EXTEND,
/// BITCAST - This operator converts between integer, vector and FP
/// values, as if the value was stored to memory with one type and loaded
/// from the same address with the other type (or equivalently for vector
/// format conversions, etc). The source and result are required to have
/// the same bit size (e.g. f32 <-> i32). This can also be used for
/// int-to-int or fp-to-fp conversions, but that is a noop, deleted by
/// getNode().
///
/// This operator is subtly different from the bitcast instruction from
/// LLVM-IR since this node may change the bits in the register. For
/// example, this occurs on big-endian NEON and big-endian MSA where the
/// layout of the bits in the register depends on the vector type and this
/// operator acts as a shuffle operation for some vector type combinations.
BITCAST,
/// ADDRSPACECAST - This operator converts between pointers of different
/// address spaces.
ADDRSPACECAST,
/// FP16_TO_FP, FP_TO_FP16 - These operators are used to perform promotions
/// and truncation for half-precision (16 bit) floating numbers. These nodes
/// form a semi-softened interface for dealing with f16 (as an i16), which
/// is often a storage-only type but has native conversions.
FP16_TO_FP,
FP_TO_FP16,
STRICT_FP16_TO_FP,
STRICT_FP_TO_FP16,
/// Perform various unary floating-point operations inspired by libm. For
/// FPOWI, the result is undefined if if the integer operand doesn't fit
/// into 32 bits.
FNEG,
FABS,
FSQRT,
FCBRT,
FSIN,
FCOS,
FPOWI,
FPOW,
FLOG,
FLOG2,
FLOG10,
FEXP,
FEXP2,
FCEIL,
FTRUNC,
FRINT,
FNEARBYINT,
FROUND,
FROUNDEVEN,
FFLOOR,
LROUND,
LLROUND,
LRINT,
LLRINT,
/// FMINNUM/FMAXNUM - Perform floating-point minimum or maximum on two
/// values.
//
/// In the case where a single input is a NaN (either signaling or quiet),
/// the non-NaN input is returned.
///
/// The return value of (FMINNUM 0.0, -0.0) could be either 0.0 or -0.0.
FMINNUM,
FMAXNUM,
/// FMINNUM_IEEE/FMAXNUM_IEEE - Perform floating-point minimum or maximum on
/// two values, following the IEEE-754 2008 definition. This differs from
/// FMINNUM/FMAXNUM in the handling of signaling NaNs. If one input is a
/// signaling NaN, returns a quiet NaN.
FMINNUM_IEEE,
FMAXNUM_IEEE,
/// FMINIMUM/FMAXIMUM - NaN-propagating minimum/maximum that also treat -0.0
/// as less than 0.0. While FMINNUM_IEEE/FMAXNUM_IEEE follow IEEE 754-2008
/// semantics, FMINIMUM/FMAXIMUM follow IEEE 754-2018 draft semantics.
FMINIMUM,
FMAXIMUM,
/// FSINCOS - Compute both fsin and fcos as a single operation.
FSINCOS,
/// LOAD and STORE have token chains as their first operand, then the same
/// operands as an LLVM load/store instruction, then an offset node that
/// is added / subtracted from the base pointer to form the address (for
/// indexed memory ops).
LOAD,
STORE,
/// DYNAMIC_STACKALLOC - Allocate some number of bytes on the stack aligned
/// to a specified boundary. This node always has two return values: a new
/// stack pointer value and a chain. The first operand is the token chain,
/// the second is the number of bytes to allocate, and the third is the
/// alignment boundary. The size is guaranteed to be a multiple of the
/// stack alignment, and the alignment is guaranteed to be bigger than the
/// stack alignment (if required) or 0 to get standard stack alignment.
DYNAMIC_STACKALLOC,
/// Control flow instructions. These all have token chains.
/// BR - Unconditional branch. The first operand is the chain
/// operand, the second is the MBB to branch to.
BR,
/// BRIND - Indirect branch. The first operand is the chain, the second
/// is the value to branch to, which must be of the same type as the
/// target's pointer type.
BRIND,
/// BR_JT - Jumptable branch. The first operand is the chain, the second
/// is the jumptable index, the last one is the jumptable entry index.
BR_JT,
/// BRCOND - Conditional branch. The first operand is the chain, the
/// second is the condition, the third is the block to branch to if the
/// condition is true. If the type of the condition is not i1, then the
/// high bits must conform to getBooleanContents. If the condition is undef,
/// it nondeterministically jumps to the block.
/// TODO: Its semantics w.r.t undef requires further discussion; we need to
/// make it sure that it is consistent with optimizations in MIR & the
/// meaning of IMPLICIT_DEF. See https://reviews.llvm.org/D92015
BRCOND,
/// BR_CC - Conditional branch. The behavior is like that of SELECT_CC, in
/// that the condition is represented as condition code, and two nodes to
/// compare, rather than as a combined SetCC node. The operands in order
/// are chain, cc, lhs, rhs, block to branch to if condition is true. If
/// condition is undef, it nondeterministically jumps to the block.
BR_CC,
/// INLINEASM - Represents an inline asm block. This node always has two
/// return values: a chain and a flag result. The inputs are as follows:
/// Operand #0 : Input chain.
/// Operand #1 : a ExternalSymbolSDNode with a pointer to the asm string.
/// Operand #2 : a MDNodeSDNode with the !srcloc metadata.
/// Operand #3 : HasSideEffect, IsAlignStack bits.
/// After this, it is followed by a list of operands with this format:
/// ConstantSDNode: Flags that encode whether it is a mem or not, the
/// of operands that follow, etc. See InlineAsm.h.
/// ... however many operands ...
/// Operand #last: Optional, an incoming flag.
///
/// The variable width operands are required to represent target addressing
/// modes as a single "operand", even though they may have multiple
/// SDOperands.
INLINEASM,
/// INLINEASM_BR - Branching version of inline asm. Used by asm-goto.
INLINEASM_BR,
/// EH_LABEL - Represents a label in mid basic block used to track
/// locations needed for debug and exception handling tables. These nodes
/// take a chain as input and return a chain.
EH_LABEL,
/// ANNOTATION_LABEL - Represents a mid basic block label used by
/// annotations. This should remain within the basic block and be ordered
/// with respect to other call instructions, but loads and stores may float
/// past it.
ANNOTATION_LABEL,
/// CATCHRET - Represents a return from a catch block funclet. Used for
/// MSVC compatible exception handling. Takes a chain operand and a
/// destination basic block operand.
CATCHRET,
/// CLEANUPRET - Represents a return from a cleanup block funclet. Used for
/// MSVC compatible exception handling. Takes only a chain operand.
CLEANUPRET,
/// STACKSAVE - STACKSAVE has one operand, an input chain. It produces a
/// value, the same type as the pointer type for the system, and an output
/// chain.
STACKSAVE,
/// STACKRESTORE has two operands, an input chain and a pointer to restore
/// to it returns an output chain.
STACKRESTORE,
/// CALLSEQ_START/CALLSEQ_END - These operators mark the beginning and end
/// of a call sequence, and carry arbitrary information that target might
/// want to know. The first operand is a chain, the rest are specified by
/// the target and not touched by the DAG optimizers.
/// Targets that may use stack to pass call arguments define additional
/// operands:
/// - size of the call frame part that must be set up within the
/// CALLSEQ_START..CALLSEQ_END pair,
/// - part of the call frame prepared prior to CALLSEQ_START.
/// Both these parameters must be constants, their sum is the total call
/// frame size.
/// CALLSEQ_START..CALLSEQ_END pairs may not be nested.
CALLSEQ_START, // Beginning of a call sequence
CALLSEQ_END, // End of a call sequence
/// VAARG - VAARG has four operands: an input chain, a pointer, a SRCVALUE,
/// and the alignment. It returns a pair of values: the vaarg value and a
/// new chain.
VAARG,
/// VACOPY - VACOPY has 5 operands: an input chain, a destination pointer,
/// a source pointer, a SRCVALUE for the destination, and a SRCVALUE for the
/// source.
VACOPY,
/// VAEND, VASTART - VAEND and VASTART have three operands: an input chain,
/// pointer, and a SRCVALUE.
VAEND,
VASTART,
// PREALLOCATED_SETUP - This has 2 operands: an input chain and a SRCVALUE
// with the preallocated call Value.
PREALLOCATED_SETUP,
// PREALLOCATED_ARG - This has 3 operands: an input chain, a SRCVALUE
// with the preallocated call Value, and a constant int.
PREALLOCATED_ARG,
/// SRCVALUE - This is a node type that holds a Value* that is used to
/// make reference to a value in the LLVM IR.
SRCVALUE,
/// MDNODE_SDNODE - This is a node that holdes an MDNode*, which is used to
/// reference metadata in the IR.
MDNODE_SDNODE,
/// PCMARKER - This corresponds to the pcmarker intrinsic.
PCMARKER,
/// READCYCLECOUNTER - This corresponds to the readcyclecounter intrinsic.
/// It produces a chain and one i64 value. The only operand is a chain.
/// If i64 is not legal, the result will be expanded into smaller values.
/// Still, it returns an i64, so targets should set legality for i64.
/// The result is the content of the architecture-specific cycle
/// counter-like register (or other high accuracy low latency clock source).
READCYCLECOUNTER,
/// HANDLENODE node - Used as a handle for various purposes.
HANDLENODE,
/// INIT_TRAMPOLINE - This corresponds to the init_trampoline intrinsic. It
/// takes as input a token chain, the pointer to the trampoline, the pointer
/// to the nested function, the pointer to pass for the 'nest' parameter, a
/// SRCVALUE for the trampoline and another for the nested function
/// (allowing targets to access the original Function*).
/// It produces a token chain as output.
INIT_TRAMPOLINE,
/// ADJUST_TRAMPOLINE - This corresponds to the adjust_trampoline intrinsic.
/// It takes a pointer to the trampoline and produces a (possibly) new
/// pointer to the same trampoline with platform-specific adjustments
/// applied. The pointer it returns points to an executable block of code.
ADJUST_TRAMPOLINE,
/// TRAP - Trapping instruction
TRAP,
/// DEBUGTRAP - Trap intended to get the attention of a debugger.
DEBUGTRAP,
/// UBSANTRAP - Trap with an immediate describing the kind of sanitizer failure.
UBSANTRAP,
/// PREFETCH - This corresponds to a prefetch intrinsic. The first operand
/// is the chain. The other operands are the address to prefetch,
/// read / write specifier, locality specifier and instruction / data cache
/// specifier.
PREFETCH,
/// OUTCHAIN = ATOMIC_FENCE(INCHAIN, ordering, scope)
/// This corresponds to the fence instruction. It takes an input chain, and
/// two integer constants: an AtomicOrdering and a SynchronizationScope.
ATOMIC_FENCE,
/// Val, OUTCHAIN = ATOMIC_LOAD(INCHAIN, ptr)
/// This corresponds to "load atomic" instruction.
ATOMIC_LOAD,
/// OUTCHAIN = ATOMIC_STORE(INCHAIN, ptr, val)
/// This corresponds to "store atomic" instruction.
ATOMIC_STORE,
/// Val, OUTCHAIN = ATOMIC_CMP_SWAP(INCHAIN, ptr, cmp, swap)
/// For double-word atomic operations:
/// ValLo, ValHi, OUTCHAIN = ATOMIC_CMP_SWAP(INCHAIN, ptr, cmpLo, cmpHi,
/// swapLo, swapHi)
/// This corresponds to the cmpxchg instruction.
ATOMIC_CMP_SWAP,
/// Val, Success, OUTCHAIN
/// = ATOMIC_CMP_SWAP_WITH_SUCCESS(INCHAIN, ptr, cmp, swap)
/// N.b. this is still a strong cmpxchg operation, so
/// Success == "Val == cmp".
ATOMIC_CMP_SWAP_WITH_SUCCESS,
/// Val, OUTCHAIN = ATOMIC_SWAP(INCHAIN, ptr, amt)
/// Val, OUTCHAIN = ATOMIC_LOAD_[OpName](INCHAIN, ptr, amt)
/// For double-word atomic operations:
/// ValLo, ValHi, OUTCHAIN = ATOMIC_SWAP(INCHAIN, ptr, amtLo, amtHi)
/// ValLo, ValHi, OUTCHAIN = ATOMIC_LOAD_[OpName](INCHAIN, ptr, amtLo, amtHi)
/// These correspond to the atomicrmw instruction.
ATOMIC_SWAP,
ATOMIC_LOAD_ADD,
ATOMIC_LOAD_SUB,
ATOMIC_LOAD_AND,
ATOMIC_LOAD_CLR,
ATOMIC_LOAD_OR,
ATOMIC_LOAD_XOR,
ATOMIC_LOAD_NAND,
ATOMIC_LOAD_MIN,
ATOMIC_LOAD_MAX,
ATOMIC_LOAD_UMIN,
ATOMIC_LOAD_UMAX,
ATOMIC_LOAD_FADD,
ATOMIC_LOAD_FSUB,
// Masked load and store - consecutive vector load and store operations
// with additional mask operand that prevents memory accesses to the
// masked-off lanes.
//
// Val, OutChain = MLOAD(BasePtr, Mask, PassThru)
// OutChain = MSTORE(Value, BasePtr, Mask)
MLOAD,
MSTORE,
// Masked gather and scatter - load and store operations for a vector of
// random addresses with additional mask operand that prevents memory
// accesses to the masked-off lanes.
//
// Val, OutChain = GATHER(InChain, PassThru, Mask, BasePtr, Index, Scale)
// OutChain = SCATTER(InChain, Value, Mask, BasePtr, Index, Scale)
//
// The Index operand can have more vector elements than the other operands
// due to type legalization. The extra elements are ignored.
MGATHER,
MSCATTER,
/// This corresponds to the llvm.lifetime.* intrinsics. The first operand
/// is the chain and the second operand is the alloca pointer.
LIFETIME_START,
LIFETIME_END,
/// GC_TRANSITION_START/GC_TRANSITION_END - These operators mark the
/// beginning and end of GC transition sequence, and carry arbitrary
/// information that target might need for lowering. The first operand is
/// a chain, the rest are specified by the target and not touched by the DAG
/// optimizers. GC_TRANSITION_START..GC_TRANSITION_END pairs may not be
/// nested.
GC_TRANSITION_START,
GC_TRANSITION_END,
/// GET_DYNAMIC_AREA_OFFSET - get offset from native SP to the address of
/// the most recent dynamic alloca. For most targets that would be 0, but
/// for some others (e.g. PowerPC, PowerPC64) that would be compile-time
/// known nonzero constant. The only operand here is the chain.
GET_DYNAMIC_AREA_OFFSET,
/// Pseudo probe for AutoFDO, as a place holder in a basic block to improve
/// the sample counts quality.
PSEUDO_PROBE,
/// VSCALE(IMM) - Returns the runtime scaling factor used to calculate the
/// number of elements within a scalable vector. IMM is a constant integer
/// multiplier that is applied to the runtime value.
VSCALE,
/// Generic reduction nodes. These nodes represent horizontal vector
/// reduction operations, producing a scalar result.
/// The SEQ variants perform reductions in sequential order. The first
/// operand is an initial scalar accumulator value, and the second operand
/// is the vector to reduce.
/// E.g. RES = VECREDUCE_SEQ_FADD f32 ACC, <4 x f32> SRC_VEC
/// ... is equivalent to
/// RES = (((ACC + SRC_VEC[0]) + SRC_VEC[1]) + SRC_VEC[2]) + SRC_VEC[3]
VECREDUCE_SEQ_FADD,
VECREDUCE_SEQ_FMUL,
/// These reductions have relaxed evaluation order semantics, and have a
/// single vector operand. The order of evaluation is unspecified. For
/// pow-of-2 vectors, one valid legalizer expansion is to use a tree
/// reduction, i.e.:
/// For RES = VECREDUCE_FADD <8 x f16> SRC_VEC
/// PART_RDX = FADD SRC_VEC[0:3], SRC_VEC[4:7]
/// PART_RDX2 = FADD PART_RDX[0:1], PART_RDX[2:3]
/// RES = FADD PART_RDX2[0], PART_RDX2[1]
/// For non-pow-2 vectors, this can be computed by extracting each element
/// and performing the operation as if it were scalarized.
VECREDUCE_FADD,
VECREDUCE_FMUL,
/// FMIN/FMAX nodes can have flags, for NaN/NoNaN variants.
VECREDUCE_FMAX,
VECREDUCE_FMIN,
/// Integer reductions may have a result type larger than the vector element
/// type. However, the reduction is performed using the vector element type
/// and the value in the top bits is unspecified.
VECREDUCE_ADD,
VECREDUCE_MUL,
VECREDUCE_AND,
VECREDUCE_OR,
VECREDUCE_XOR,
VECREDUCE_SMAX,
VECREDUCE_SMIN,
VECREDUCE_UMAX,
VECREDUCE_UMIN,
// Vector Predication
#define BEGIN_REGISTER_VP_SDNODE(VPSDID, ...) VPSDID,
#include "llvm/IR/VPIntrinsics.def"
/// BUILTIN_OP_END - This must be the last enum value in this list.
/// The target-specific pre-isel opcode values start here.
BUILTIN_OP_END
};
/// FIRST_TARGET_STRICTFP_OPCODE - Target-specific pre-isel operations
/// which cannot raise FP exceptions should be less than this value.
/// Those that do must not be less than this value.
static const int FIRST_TARGET_STRICTFP_OPCODE = BUILTIN_OP_END + 400;
/// FIRST_TARGET_MEMORY_OPCODE - Target-specific pre-isel operations
/// which do not reference a specific memory location should be less than
/// this value. Those that do must not be less than this value, and can
/// be used with SelectionDAG::getMemIntrinsicNode.
static const int FIRST_TARGET_MEMORY_OPCODE = BUILTIN_OP_END + 500;
/// Get underlying scalar opcode for VECREDUCE opcode.
/// For example ISD::AND for ISD::VECREDUCE_AND.
NodeType getVecReduceBaseOpcode(unsigned VecReduceOpcode);
/// Whether this is a vector-predicated Opcode.
bool isVPOpcode(unsigned Opcode);
/// The operand position of the vector mask.
Optional<unsigned> getVPMaskIdx(unsigned Opcode);
/// The operand position of the explicit vector length parameter.
Optional<unsigned> getVPExplicitVectorLengthIdx(unsigned Opcode);
//===--------------------------------------------------------------------===//
/// MemIndexedMode enum - This enum defines the load / store indexed
/// addressing modes.
///
/// UNINDEXED "Normal" load / store. The effective address is already
/// computed and is available in the base pointer. The offset
/// operand is always undefined. In addition to producing a
/// chain, an unindexed load produces one value (result of the
/// load); an unindexed store does not produce a value.
///
/// PRE_INC Similar to the unindexed mode where the effective address is
/// PRE_DEC the value of the base pointer add / subtract the offset.
/// It considers the computation as being folded into the load /
/// store operation (i.e. the load / store does the address
/// computation as well as performing the memory transaction).
/// The base operand is always undefined. In addition to
/// producing a chain, pre-indexed load produces two values
/// (result of the load and the result of the address
/// computation); a pre-indexed store produces one value (result
/// of the address computation).
///
/// POST_INC The effective address is the value of the base pointer. The
/// POST_DEC value of the offset operand is then added to / subtracted
/// from the base after memory transaction. In addition to
/// producing a chain, post-indexed load produces two values
/// (the result of the load and the result of the base +/- offset
/// computation); a post-indexed store produces one value (the
/// the result of the base +/- offset computation).
enum MemIndexedMode { UNINDEXED = 0, PRE_INC, PRE_DEC, POST_INC, POST_DEC };
static const int LAST_INDEXED_MODE = POST_DEC + 1;
//===--------------------------------------------------------------------===//
/// MemIndexType enum - This enum defines how to interpret MGATHER/SCATTER's
/// index parameter when calculating addresses.
///
/// SIGNED_SCALED Addr = Base + ((signed)Index * sizeof(element))
/// SIGNED_UNSCALED Addr = Base + (signed)Index
/// UNSIGNED_SCALED Addr = Base + ((unsigned)Index * sizeof(element))
/// UNSIGNED_UNSCALED Addr = Base + (unsigned)Index
enum MemIndexType {
SIGNED_SCALED = 0,
SIGNED_UNSCALED,
UNSIGNED_SCALED,
UNSIGNED_UNSCALED
};
static const int LAST_MEM_INDEX_TYPE = UNSIGNED_UNSCALED + 1;
//===--------------------------------------------------------------------===//
/// LoadExtType enum - This enum defines the three variants of LOADEXT
/// (load with extension).
///
/// SEXTLOAD loads the integer operand and sign extends it to a larger
/// integer result type.
/// ZEXTLOAD loads the integer operand and zero extends it to a larger
/// integer result type.
/// EXTLOAD is used for two things: floating point extending loads and
/// integer extending loads [the top bits are undefined].
enum LoadExtType { NON_EXTLOAD = 0, EXTLOAD, SEXTLOAD, ZEXTLOAD };
static const int LAST_LOADEXT_TYPE = ZEXTLOAD + 1;
NodeType getExtForLoadExtType(bool IsFP, LoadExtType);
//===--------------------------------------------------------------------===//
/// ISD::CondCode enum - These are ordered carefully to make the bitfields
/// below work out, when considering SETFALSE (something that never exists
/// dynamically) as 0. "U" -> Unsigned (for integer operands) or Unordered
/// (for floating point), "L" -> Less than, "G" -> Greater than, "E" -> Equal
/// to. If the "N" column is 1, the result of the comparison is undefined if
/// the input is a NAN.
///
/// All of these (except for the 'always folded ops') should be handled for
/// floating point. For integer, only the SETEQ,SETNE,SETLT,SETLE,SETGT,
/// SETGE,SETULT,SETULE,SETUGT, and SETUGE opcodes are used.
///
/// Note that these are laid out in a specific order to allow bit-twiddling
/// to transform conditions.
enum CondCode {
// Opcode N U L G E Intuitive operation
SETFALSE, // 0 0 0 0 Always false (always folded)
SETOEQ, // 0 0 0 1 True if ordered and equal
SETOGT, // 0 0 1 0 True if ordered and greater than
SETOGE, // 0 0 1 1 True if ordered and greater than or equal
SETOLT, // 0 1 0 0 True if ordered and less than
SETOLE, // 0 1 0 1 True if ordered and less than or equal
SETONE, // 0 1 1 0 True if ordered and operands are unequal
SETO, // 0 1 1 1 True if ordered (no nans)
SETUO, // 1 0 0 0 True if unordered: isnan(X) | isnan(Y)
SETUEQ, // 1 0 0 1 True if unordered or equal
SETUGT, // 1 0 1 0 True if unordered or greater than
SETUGE, // 1 0 1 1 True if unordered, greater than, or equal
SETULT, // 1 1 0 0 True if unordered or less than
SETULE, // 1 1 0 1 True if unordered, less than, or equal
SETUNE, // 1 1 1 0 True if unordered or not equal
SETTRUE, // 1 1 1 1 Always true (always folded)
// Don't care operations: undefined if the input is a nan.
SETFALSE2, // 1 X 0 0 0 Always false (always folded)
SETEQ, // 1 X 0 0 1 True if equal
SETGT, // 1 X 0 1 0 True if greater than
SETGE, // 1 X 0 1 1 True if greater than or equal
SETLT, // 1 X 1 0 0 True if less than
SETLE, // 1 X 1 0 1 True if less than or equal
SETNE, // 1 X 1 1 0 True if not equal
SETTRUE2, // 1 X 1 1 1 Always true (always folded)
SETCC_INVALID // Marker value.
};
/// Return true if this is a setcc instruction that performs a signed
/// comparison when used with integer operands.
inline bool isSignedIntSetCC(CondCode Code) {
return Code == SETGT || Code == SETGE || Code == SETLT || Code == SETLE;
}
/// Return true if this is a setcc instruction that performs an unsigned
/// comparison when used with integer operands.
inline bool isUnsignedIntSetCC(CondCode Code) {
return Code == SETUGT || Code == SETUGE || Code == SETULT || Code == SETULE;
}
/// Return true if this is a setcc instruction that performs an equality
/// comparison when used with integer operands.
inline bool isIntEqualitySetCC(CondCode Code) {
return Code == SETEQ || Code == SETNE;
}
/// Return true if the specified condition returns true if the two operands to
/// the condition are equal. Note that if one of the two operands is a NaN,
/// this value is meaningless.
inline bool isTrueWhenEqual(CondCode Cond) { return ((int)Cond & 1) != 0; }
/// This function returns 0 if the condition is always false if an operand is
/// a NaN, 1 if the condition is always true if the operand is a NaN, and 2 if
/// the condition is undefined if the operand is a NaN.
inline unsigned getUnorderedFlavor(CondCode Cond) {
return ((int)Cond >> 3) & 3;
}
/// Return the operation corresponding to !(X op Y), where 'op' is a valid
/// SetCC operation.
CondCode getSetCCInverse(CondCode Operation, EVT Type);
namespace GlobalISel {
/// Return the operation corresponding to !(X op Y), where 'op' is a valid
/// SetCC operation. The U bit of the condition code has different meanings
/// between floating point and integer comparisons and LLT's don't provide
/// this distinction. As such we need to be told whether the comparison is
/// floating point or integer-like. Pointers should use integer-like
/// comparisons.
CondCode getSetCCInverse(CondCode Operation, bool isIntegerLike);
} // end namespace GlobalISel
/// Return the operation corresponding to (Y op X) when given the operation
/// for (X op Y).
CondCode getSetCCSwappedOperands(CondCode Operation);
/// Return the result of a logical OR between different comparisons of
/// identical values: ((X op1 Y) | (X op2 Y)). This function returns
/// SETCC_INVALID if it is not possible to represent the resultant comparison.
CondCode getSetCCOrOperation(CondCode Op1, CondCode Op2, EVT Type);
/// Return the result of a logical AND between different comparisons of
/// identical values: ((X op1 Y) & (X op2 Y)). This function returns
/// SETCC_INVALID if it is not possible to represent the resultant comparison.
CondCode getSetCCAndOperation(CondCode Op1, CondCode Op2, EVT Type);
} // namespace ISD
} // namespace llvm
#endif
Reference in New Issue View Git Blame Copy Permalink