//===-- llvm/CodeGen/ISDOpcodes.h - CodeGen opcodes -------------*- C++ -*-===// // // Part of the LLVM Project, under the Apache License v2.0 with LLVM Exceptions. // See https://llvm.org/LICENSE.txt for license information. // SPDX-License-Identifier: Apache-2.0 WITH LLVM-exception // //===----------------------------------------------------------------------===// // // This file declares codegen opcodes and related utilities. // //===----------------------------------------------------------------------===// #ifndef LLVM_CODEGEN_ISDOPCODES_H #define LLVM_CODEGEN_ISDOPCODES_H #include "llvm/CodeGen/ValueTypes.h" namespace llvm { /// ISD namespace - This namespace contains an enum which represents all of the /// SelectionDAG node types and value types. /// namespace ISD { //===--------------------------------------------------------------------===// /// ISD::NodeType enum - This enum defines the target-independent operators /// for a SelectionDAG. /// /// Targets may also define target-dependent operator codes for SDNodes. For /// example, on x86, these are the enum values in the X86ISD namespace. /// Targets should aim to use target-independent operators to model their /// instruction sets as much as possible, and only use target-dependent /// operators when they have special requirements. /// /// Finally, during and after selection proper, SNodes may use special /// operator codes that correspond directly with MachineInstr opcodes. These /// are used to represent selected instructions. See the isMachineOpcode() /// and getMachineOpcode() member functions of SDNode. /// enum NodeType { /// DELETED_NODE - This is an illegal value that is used to catch /// errors. This opcode is not a legal opcode for any node. DELETED_NODE, /// EntryToken - This is the marker used to indicate the start of a region. EntryToken, /// TokenFactor - This node takes multiple tokens as input and produces a /// single token result. This is used to represent the fact that the operand /// operators are independent of each other. TokenFactor, /// AssertSext, AssertZext - These nodes record if a register contains a /// value that has already been zero or sign extended from a narrower type. /// These nodes take two operands. The first is the node that has already /// been extended, and the second is a value type node indicating the width /// of the extension AssertSext, AssertZext, AssertAlign, /// Various leaf nodes. BasicBlock, VALUETYPE, CONDCODE, Register, RegisterMask, Constant, ConstantFP, GlobalAddress, GlobalTLSAddress, FrameIndex, JumpTable, ConstantPool, ExternalSymbol, BlockAddress, /// The address of the GOT GLOBAL_OFFSET_TABLE, /// FRAMEADDR, RETURNADDR - These nodes represent llvm.frameaddress and /// llvm.returnaddress on the DAG. These nodes take one operand, the index /// of the frame or return address to return. An index of zero corresponds /// to the current function's frame or return address, an index of one to /// the parent's frame or return address, and so on. FRAMEADDR, RETURNADDR, /// ADDROFRETURNADDR - Represents the llvm.addressofreturnaddress intrinsic. /// This node takes no operand, returns a target-specific pointer to the /// place in the stack frame where the return address of the current /// function is stored. ADDROFRETURNADDR, /// SPONENTRY - Represents the llvm.sponentry intrinsic. Takes no argument /// and returns the stack pointer value at the entry of the current /// function calling this intrinsic. SPONENTRY, /// LOCAL_RECOVER - Represents the llvm.localrecover intrinsic. /// Materializes the offset from the local object pointer of another /// function to a particular local object passed to llvm.localescape. The /// operand is the MCSymbol label used to represent this offset, since /// typically the offset is not known until after code generation of the /// parent. LOCAL_RECOVER, /// READ_REGISTER, WRITE_REGISTER - This node represents llvm.register on /// the DAG, which implements the named register global variables extension. READ_REGISTER, WRITE_REGISTER, /// FRAME_TO_ARGS_OFFSET - This node represents offset from frame pointer to /// first (possible) on-stack argument. This is needed for correct stack /// adjustment during unwind. FRAME_TO_ARGS_OFFSET, /// EH_DWARF_CFA - This node represents the pointer to the DWARF Canonical /// Frame Address (CFA), generally the value of the stack pointer at the /// call site in the previous frame. EH_DWARF_CFA, /// OUTCHAIN = EH_RETURN(INCHAIN, OFFSET, HANDLER) - This node represents /// 'eh_return' gcc dwarf builtin, which is used to return from /// exception. The general meaning is: adjust stack by OFFSET and pass /// execution to HANDLER. Many platform-related details also :) EH_RETURN, /// RESULT, OUTCHAIN = EH_SJLJ_SETJMP(INCHAIN, buffer) /// This corresponds to the eh.sjlj.setjmp intrinsic. /// It takes an input chain and a pointer to the jump buffer as inputs /// and returns an outchain. EH_SJLJ_SETJMP, /// OUTCHAIN = EH_SJLJ_LONGJMP(INCHAIN, buffer) /// This corresponds to the eh.sjlj.longjmp intrinsic. /// It takes an input chain and a pointer to the jump buffer as inputs /// and returns an outchain. EH_SJLJ_LONGJMP, /// OUTCHAIN = EH_SJLJ_SETUP_DISPATCH(INCHAIN) /// The target initializes the dispatch table here. EH_SJLJ_SETUP_DISPATCH, /// TargetConstant* - Like Constant*, but the DAG does not do any folding, /// simplification, or lowering of the constant. They are used for constants /// which are known to fit in the immediate fields of their users, or for /// carrying magic numbers which are not values which need to be /// materialized in registers. TargetConstant, TargetConstantFP, /// TargetGlobalAddress - Like GlobalAddress, but the DAG does no folding or /// anything else with this node, and this is valid in the target-specific /// dag, turning into a GlobalAddress operand. TargetGlobalAddress, TargetGlobalTLSAddress, TargetFrameIndex, TargetJumpTable, TargetConstantPool, TargetExternalSymbol, TargetBlockAddress, MCSymbol, /// TargetIndex - Like a constant pool entry, but with completely /// target-dependent semantics. Holds target flags, a 32-bit index, and a /// 64-bit index. Targets can use this however they like. TargetIndex, /// RESULT = INTRINSIC_WO_CHAIN(INTRINSICID, arg1, arg2, ...) /// This node represents a target intrinsic function with no side effects. /// The first operand is the ID number of the intrinsic from the /// llvm::Intrinsic namespace. The operands to the intrinsic follow. The /// node returns the result of the intrinsic. INTRINSIC_WO_CHAIN, /// RESULT,OUTCHAIN = INTRINSIC_W_CHAIN(INCHAIN, INTRINSICID, arg1, ...) /// This node represents a target intrinsic function with side effects that /// returns a result. The first operand is a chain pointer. The second is /// the ID number of the intrinsic from the llvm::Intrinsic namespace. The /// operands to the intrinsic follow. The node has two results, the result /// of the intrinsic and an output chain. INTRINSIC_W_CHAIN, /// OUTCHAIN = INTRINSIC_VOID(INCHAIN, INTRINSICID, arg1, arg2, ...) /// This node represents a target intrinsic function with side effects that /// does not return a result. The first operand is a chain pointer. The /// second is the ID number of the intrinsic from the llvm::Intrinsic /// namespace. The operands to the intrinsic follow. INTRINSIC_VOID, /// CopyToReg - This node has three operands: a chain, a register number to /// set to this value, and a value. CopyToReg, /// CopyFromReg - This node indicates that the input value is a virtual or /// physical register that is defined outside of the scope of this /// SelectionDAG. The register is available from the RegisterSDNode object. CopyFromReg, /// UNDEF - An undefined node. UNDEF, // FREEZE - FREEZE(VAL) returns an arbitrary value if VAL is UNDEF (or // is evaluated to UNDEF), or returns VAL otherwise. Note that each // read of UNDEF can yield different value, but FREEZE(UNDEF) cannot. FREEZE, /// EXTRACT_ELEMENT - This is used to get the lower or upper (determined by /// a Constant, which is required to be operand #1) half of the integer or /// float value specified as operand #0. This is only for use before /// legalization, for values that will be broken into multiple registers. EXTRACT_ELEMENT, /// BUILD_PAIR - This is the opposite of EXTRACT_ELEMENT in some ways. /// Given two values of the same integer value type, this produces a value /// twice as big. Like EXTRACT_ELEMENT, this can only be used before /// legalization. The lower part of the composite value should be in /// element 0 and the upper part should be in element 1. BUILD_PAIR, /// MERGE_VALUES - This node takes multiple discrete operands and returns /// them all as its individual results. This nodes has exactly the same /// number of inputs and outputs. This node is useful for some pieces of the /// code generator that want to think about a single node with multiple /// results, not multiple nodes. MERGE_VALUES, /// Simple integer binary arithmetic operators. ADD, SUB, MUL, SDIV, UDIV, SREM, UREM, /// SMUL_LOHI/UMUL_LOHI - Multiply two integers of type iN, producing /// a signed/unsigned value of type i[2*N], and return the full value as /// two results, each of type iN. SMUL_LOHI, UMUL_LOHI, /// SDIVREM/UDIVREM - Divide two integers and produce both a quotient and /// remainder result. SDIVREM, UDIVREM, /// CARRY_FALSE - This node is used when folding other nodes, /// like ADDC/SUBC, which indicate the carry result is always false. CARRY_FALSE, /// Carry-setting nodes for multiple precision addition and subtraction. /// These nodes take two operands of the same value type, and produce two /// results. The first result is the normal add or sub result, the second /// result is the carry flag result. /// FIXME: These nodes are deprecated in favor of ADDCARRY and SUBCARRY. /// They are kept around for now to provide a smooth transition path /// toward the use of ADDCARRY/SUBCARRY and will eventually be removed. ADDC, SUBC, /// Carry-using nodes for multiple precision addition and subtraction. These /// nodes take three operands: The first two are the normal lhs and rhs to /// the add or sub, and the third is the input carry flag. These nodes /// produce two results; the normal result of the add or sub, and the output /// carry flag. These nodes both read and write a carry flag to allow them /// to them to be chained together for add and sub of arbitrarily large /// values. ADDE, SUBE, /// Carry-using nodes for multiple precision addition and subtraction. /// These nodes take three operands: The first two are the normal lhs and /// rhs to the add or sub, and the third is a boolean indicating if there /// is an incoming carry. These nodes produce two results: the normal /// result of the add or sub, and the output carry so they can be chained /// together. The use of this opcode is preferable to adde/sube if the /// target supports it, as the carry is a regular value rather than a /// glue, which allows further optimisation. ADDCARRY, SUBCARRY, /// Carry-using overflow-aware nodes for multiple precision addition and /// subtraction. These nodes take three operands: The first two are normal lhs /// and rhs to the add or sub, and the third is a boolean indicating if there /// is an incoming carry. They produce two results: the normal result of the /// add or sub, and a boolean that indicates if an overflow occured (*not* /// flag, because it may be a store to memory, etc.). If the type of the /// boolean is not i1 then the high bits conform to getBooleanContents. SADDO_CARRY, SSUBO_CARRY, /// RESULT, BOOL = [SU]ADDO(LHS, RHS) - Overflow-aware nodes for addition. /// These nodes take two operands: the normal LHS and RHS to the add. They /// produce two results: the normal result of the add, and a boolean that /// indicates if an overflow occurred (*not* a flag, because it may be store /// to memory, etc.). If the type of the boolean is not i1 then the high /// bits conform to getBooleanContents. /// These nodes are generated from llvm.[su]add.with.overflow intrinsics. SADDO, UADDO, /// Same for subtraction. SSUBO, USUBO, /// Same for multiplication. SMULO, UMULO, /// RESULT = [US]ADDSAT(LHS, RHS) - Perform saturation addition on 2 /// integers with the same bit width (W). If the true value of LHS + RHS /// exceeds the largest value that can be represented by W bits, the /// resulting value is this maximum value. Otherwise, if this value is less /// than the smallest value that can be represented by W bits, the /// resulting value is this minimum value. SADDSAT, UADDSAT, /// RESULT = [US]SUBSAT(LHS, RHS) - Perform saturation subtraction on 2 /// integers with the same bit width (W). If the true value of LHS - RHS /// exceeds the largest value that can be represented by W bits, the /// resulting value is this maximum value. Otherwise, if this value is less /// than the smallest value that can be represented by W bits, the /// resulting value is this minimum value. SSUBSAT, USUBSAT, /// RESULT = [US]SHLSAT(LHS, RHS) - Perform saturation left shift. The first /// operand is the value to be shifted, and the second argument is the amount /// to shift by. Both must be integers of the same bit width (W). If the true /// value of LHS << RHS exceeds the largest value that can be represented by /// W bits, the resulting value is this maximum value, Otherwise, if this /// value is less than the smallest value that can be represented by W bits, /// the resulting value is this minimum value. SSHLSAT, USHLSAT, /// RESULT = [US]MULFIX(LHS, RHS, SCALE) - Perform fixed point multiplication /// on /// 2 integers with the same width and scale. SCALE represents the scale of /// both operands as fixed point numbers. This SCALE parameter must be a /// constant integer. A scale of zero is effectively performing /// multiplication on 2 integers. SMULFIX, UMULFIX, /// Same as the corresponding unsaturated fixed point instructions, but the /// result is clamped between the min and max values representable by the /// bits of the first 2 operands. SMULFIXSAT, UMULFIXSAT, /// RESULT = [US]DIVFIX(LHS, RHS, SCALE) - Perform fixed point division on /// 2 integers with the same width and scale. SCALE represents the scale /// of both operands as fixed point numbers. This SCALE parameter must be a /// constant integer. SDIVFIX, UDIVFIX, /// Same as the corresponding unsaturated fixed point instructions, but the /// result is clamped between the min and max values representable by the /// bits of the first 2 operands. SDIVFIXSAT, UDIVFIXSAT, /// Simple binary floating point operators. FADD, FSUB, FMUL, FDIV, FREM, /// Constrained versions of the binary floating point operators. /// These will be lowered to the simple operators before final selection. /// They are used to limit optimizations while the DAG is being /// optimized. STRICT_FADD, STRICT_FSUB, STRICT_FMUL, STRICT_FDIV, STRICT_FREM, STRICT_FMA, /// Constrained versions of libm-equivalent floating point intrinsics. /// These will be lowered to the equivalent non-constrained pseudo-op /// (or expanded to the equivalent library call) before final selection. /// They are used to limit optimizations while the DAG is being optimized. STRICT_FSQRT, STRICT_FPOW, STRICT_FPOWI, STRICT_FSIN, STRICT_FCOS, STRICT_FEXP, STRICT_FEXP2, STRICT_FLOG, STRICT_FLOG10, STRICT_FLOG2, STRICT_FRINT, STRICT_FNEARBYINT, STRICT_FMAXNUM, STRICT_FMINNUM, STRICT_FCEIL, STRICT_FFLOOR, STRICT_FROUND, STRICT_FROUNDEVEN, STRICT_FTRUNC, STRICT_LROUND, STRICT_LLROUND, STRICT_LRINT, STRICT_LLRINT, STRICT_FMAXIMUM, STRICT_FMINIMUM, /// STRICT_FP_TO_[US]INT - Convert a floating point value to a signed or /// unsigned integer. These have the same semantics as fptosi and fptoui /// in IR. /// They are used to limit optimizations while the DAG is being optimized. STRICT_FP_TO_SINT, STRICT_FP_TO_UINT, /// STRICT_[US]INT_TO_FP - Convert a signed or unsigned integer to /// a floating point value. These have the same semantics as sitofp and /// uitofp in IR. /// They are used to limit optimizations while the DAG is being optimized. STRICT_SINT_TO_FP, STRICT_UINT_TO_FP, /// X = STRICT_FP_ROUND(Y, TRUNC) - Rounding 'Y' from a larger floating /// point type down to the precision of the destination VT. TRUNC is a /// flag, which is always an integer that is zero or one. If TRUNC is 0, /// this is a normal rounding, if it is 1, this FP_ROUND is known to not /// change the value of Y. /// /// The TRUNC = 1 case is used in cases where we know that the value will /// not be modified by the node, because Y is not using any of the extra /// precision of source type. This allows certain transformations like /// STRICT_FP_EXTEND(STRICT_FP_ROUND(X,1)) -> X which are not safe for /// STRICT_FP_EXTEND(STRICT_FP_ROUND(X,0)) because the extra bits aren't /// removed. /// It is used to limit optimizations while the DAG is being optimized. STRICT_FP_ROUND, /// X = STRICT_FP_EXTEND(Y) - Extend a smaller FP type into a larger FP /// type. /// It is used to limit optimizations while the DAG is being optimized. STRICT_FP_EXTEND, /// STRICT_FSETCC/STRICT_FSETCCS - Constrained versions of SETCC, used /// for floating-point operands only. STRICT_FSETCC performs a quiet /// comparison operation, while STRICT_FSETCCS performs a signaling /// comparison operation. STRICT_FSETCC, STRICT_FSETCCS, /// FMA - Perform a * b + c with no intermediate rounding step. FMA, /// FMAD - Perform a * b + c, while getting the same result as the /// separately rounded operations. FMAD, /// FCOPYSIGN(X, Y) - Return the value of X with the sign of Y. NOTE: This /// DAG node does not require that X and Y have the same type, just that /// they are both floating point. X and the result must have the same type. /// FCOPYSIGN(f32, f64) is allowed. FCOPYSIGN, /// INT = FGETSIGN(FP) - Return the sign bit of the specified floating point /// value as an integer 0/1 value. FGETSIGN, /// Returns platform specific canonical encoding of a floating point number. FCANONICALIZE, /// BUILD_VECTOR(ELT0, ELT1, ELT2, ELT3,...) - Return a fixed-width vector /// with the specified, possibly variable, elements. The types of the /// operands must match the vector element type, except that integer types /// are allowed to be larger than the element type, in which case the /// operands are implicitly truncated. The types of the operands must all /// be the same. BUILD_VECTOR, /// INSERT_VECTOR_ELT(VECTOR, VAL, IDX) - Returns VECTOR with the element /// at IDX replaced with VAL. If the type of VAL is larger than the vector /// element type then VAL is truncated before replacement. /// /// If VECTOR is a scalable vector, then IDX may be larger than the minimum /// vector width. IDX is not first scaled by the runtime scaling factor of /// VECTOR. INSERT_VECTOR_ELT, /// EXTRACT_VECTOR_ELT(VECTOR, IDX) - Returns a single element from VECTOR /// identified by the (potentially variable) element number IDX. If the return /// type is an integer type larger than the element type of the vector, the /// result is extended to the width of the return type. In that case, the high /// bits are undefined. /// /// If VECTOR is a scalable vector, then IDX may be larger than the minimum /// vector width. IDX is not first scaled by the runtime scaling factor of /// VECTOR. EXTRACT_VECTOR_ELT, /// CONCAT_VECTORS(VECTOR0, VECTOR1, ...) - Given a number of values of /// vector type with the same length and element type, this produces a /// concatenated vector result value, with length equal to the sum of the /// lengths of the input vectors. If VECTOR0 is a fixed-width vector, then /// VECTOR1..VECTORN must all be fixed-width vectors. Similarly, if VECTOR0 /// is a scalable vector, then VECTOR1..VECTORN must all be scalable vectors. CONCAT_VECTORS, /// INSERT_SUBVECTOR(VECTOR1, VECTOR2, IDX) - Returns a vector with VECTOR2 /// inserted into VECTOR1. IDX represents the starting element number at which /// VECTOR2 will be inserted. IDX must be a constant multiple of T's known /// minimum vector length. Let the type of VECTOR2 be T, then if T is a /// scalable vector, IDX is first scaled by the runtime scaling factor of T. /// The elements of VECTOR1 starting at IDX are overwritten with VECTOR2. /// Elements IDX through (IDX + num_elements(T) - 1) must be valid VECTOR1 /// indices. If this condition cannot be determined statically but is false at /// runtime, then the result vector is undefined. /// /// This operation supports inserting a fixed-width vector into a scalable /// vector, but not the other way around. INSERT_SUBVECTOR, /// EXTRACT_SUBVECTOR(VECTOR, IDX) - Returns a subvector from VECTOR. /// Let the result type be T, then IDX represents the starting element number /// from which a subvector of type T is extracted. IDX must be a constant /// multiple of T's known minimum vector length. If T is a scalable vector, /// IDX is first scaled by the runtime scaling factor of T. Elements IDX /// through (IDX + num_elements(T) - 1) must be valid VECTOR indices. If this /// condition cannot be determined statically but is false at runtime, then /// the result vector is undefined. The IDX parameter must be a vector index /// constant type, which for most targets will be an integer pointer type. /// /// This operation supports extracting a fixed-width vector from a scalable /// vector, but not the other way around. EXTRACT_SUBVECTOR, /// VECTOR_SHUFFLE(VEC1, VEC2) - Returns a vector, of the same type as /// VEC1/VEC2. A VECTOR_SHUFFLE node also contains an array of constant int /// values that indicate which value (or undef) each result element will /// get. These constant ints are accessible through the /// ShuffleVectorSDNode class. This is quite similar to the Altivec /// 'vperm' instruction, except that the indices must be constants and are /// in terms of the element size of VEC1/VEC2, not in terms of bytes. VECTOR_SHUFFLE, /// SCALAR_TO_VECTOR(VAL) - This represents the operation of loading a /// scalar value into element 0 of the resultant vector type. The top /// elements 1 to N-1 of the N-element vector are undefined. The type /// of the operand must match the vector element type, except when they /// are integer types. In this case the operand is allowed to be wider /// than the vector element type, and is implicitly truncated to it. SCALAR_TO_VECTOR, /// SPLAT_VECTOR(VAL) - Returns a vector with the scalar value VAL /// duplicated in all lanes. The type of the operand must match the vector /// element type, except when they are integer types. In this case the /// operand is allowed to be wider than the vector element type, and is /// implicitly truncated to it. SPLAT_VECTOR, /// MULHU/MULHS - Multiply high - Multiply two integers of type iN, /// producing an unsigned/signed value of type i[2*N], then return the top /// part. MULHU, MULHS, /// [US]{MIN/MAX} - Binary minimum or maximum or signed or unsigned /// integers. SMIN, SMAX, UMIN, UMAX, /// Bitwise operators - logical and, logical or, logical xor. AND, OR, XOR, /// ABS - Determine the unsigned absolute value of a signed integer value of /// the same bitwidth. /// Note: A value of INT_MIN will return INT_MIN, no saturation or overflow /// is performed. ABS, /// Shift and rotation operations. After legalization, the type of the /// shift amount is known to be TLI.getShiftAmountTy(). Before legalization /// the shift amount can be any type, but care must be taken to ensure it is /// large enough. TLI.getShiftAmountTy() is i8 on some targets, but before /// legalization, types like i1024 can occur and i8 doesn't have enough bits /// to represent the shift amount. /// When the 1st operand is a vector, the shift amount must be in the same /// type. (TLI.getShiftAmountTy() will return the same type when the input /// type is a vector.) /// For rotates and funnel shifts, the shift amount is treated as an unsigned /// amount modulo the element size of the first operand. /// /// Funnel 'double' shifts take 3 operands, 2 inputs and the shift amount. /// fshl(X,Y,Z): (X << (Z % BW)) | (Y >> (BW - (Z % BW))) /// fshr(X,Y,Z): (X << (BW - (Z % BW))) | (Y >> (Z % BW)) SHL, SRA, SRL, ROTL, ROTR, FSHL, FSHR, /// Byte Swap and Counting operators. BSWAP, CTTZ, CTLZ, CTPOP, BITREVERSE, PARITY, /// Bit counting operators with an undefined result for zero inputs. CTTZ_ZERO_UNDEF, CTLZ_ZERO_UNDEF, /// Select(COND, TRUEVAL, FALSEVAL). If the type of the boolean COND is not /// i1 then the high bits must conform to getBooleanContents. SELECT, /// Select with a vector condition (op #0) and two vector operands (ops #1 /// and #2), returning a vector result. All vectors have the same length. /// Much like the scalar select and setcc, each bit in the condition selects /// whether the corresponding result element is taken from op #1 or op #2. /// At first, the VSELECT condition is of vXi1 type. Later, targets may /// change the condition type in order to match the VSELECT node using a /// pattern. The condition follows the BooleanContent format of the target. VSELECT, /// Select with condition operator - This selects between a true value and /// a false value (ops #2 and #3) based on the boolean result of comparing /// the lhs and rhs (ops #0 and #1) of a conditional expression with the /// condition code in op #4, a CondCodeSDNode. SELECT_CC, /// SetCC operator - This evaluates to a true value iff the condition is /// true. If the result value type is not i1 then the high bits conform /// to getBooleanContents. The operands to this are the left and right /// operands to compare (ops #0, and #1) and the condition code to compare /// them with (op #2) as a CondCodeSDNode. If the operands are vector types /// then the result type must also be a vector type. SETCC, /// Like SetCC, ops #0 and #1 are the LHS and RHS operands to compare, but /// op #2 is a boolean indicating if there is an incoming carry. This /// operator checks the result of "LHS - RHS - Carry", and can be used to /// compare two wide integers: /// (setcccarry lhshi rhshi (subcarry lhslo rhslo) cc). /// Only valid for integers. SETCCCARRY, /// SHL_PARTS/SRA_PARTS/SRL_PARTS - These operators are used for expanded /// integer shift operations. The operation ordering is: /// [Lo,Hi] = op [LoLHS,HiLHS], Amt SHL_PARTS, SRA_PARTS, SRL_PARTS, /// Conversion operators. These are all single input single output /// operations. For all of these, the result type must be strictly /// wider or narrower (depending on the operation) than the source /// type. /// SIGN_EXTEND - Used for integer types, replicating the sign bit /// into new bits. SIGN_EXTEND, /// ZERO_EXTEND - Used for integer types, zeroing the new bits. ZERO_EXTEND, /// ANY_EXTEND - Used for integer types. The high bits are undefined. ANY_EXTEND, /// TRUNCATE - Completely drop the high bits. TRUNCATE, /// [SU]INT_TO_FP - These operators convert integers (whose interpreted sign /// depends on the first letter) to floating point. SINT_TO_FP, UINT_TO_FP, /// SIGN_EXTEND_INREG - This operator atomically performs a SHL/SRA pair to /// sign extend a small value in a large integer register (e.g. sign /// extending the low 8 bits of a 32-bit register to fill the top 24 bits /// with the 7th bit). The size of the smaller type is indicated by the 1th /// operand, a ValueType node. SIGN_EXTEND_INREG, /// ANY_EXTEND_VECTOR_INREG(Vector) - This operator represents an /// in-register any-extension of the low lanes of an integer vector. The /// result type must have fewer elements than the operand type, and those /// elements must be larger integer types such that the total size of the /// operand type is less than or equal to the size of the result type. Each /// of the low operand elements is any-extended into the corresponding, /// wider result elements with the high bits becoming undef. /// NOTE: The type legalizer prefers to make the operand and result size /// the same to allow expansion to shuffle vector during op legalization. ANY_EXTEND_VECTOR_INREG, /// SIGN_EXTEND_VECTOR_INREG(Vector) - This operator represents an /// in-register sign-extension of the low lanes of an integer vector. The /// result type must have fewer elements than the operand type, and those /// elements must be larger integer types such that the total size of the /// operand type is less than or equal to the size of the result type. Each /// of the low operand elements is sign-extended into the corresponding, /// wider result elements. /// NOTE: The type legalizer prefers to make the operand and result size /// the same to allow expansion to shuffle vector during op legalization. SIGN_EXTEND_VECTOR_INREG, /// ZERO_EXTEND_VECTOR_INREG(Vector) - This operator represents an /// in-register zero-extension of the low lanes of an integer vector. The /// result type must have fewer elements than the operand type, and those /// elements must be larger integer types such that the total size of the /// operand type is less than or equal to the size of the result type. Each /// of the low operand elements is zero-extended into the corresponding, /// wider result elements. /// NOTE: The type legalizer prefers to make the operand and result size /// the same to allow expansion to shuffle vector during op legalization. ZERO_EXTEND_VECTOR_INREG, /// FP_TO_[US]INT - Convert a floating point value to a signed or unsigned /// integer. These have the same semantics as fptosi and fptoui in IR. If /// the FP value cannot fit in the integer type, the results are undefined. FP_TO_SINT, FP_TO_UINT, /// FP_TO_[US]INT_SAT - Convert floating point value in operand 0 to a /// signed or unsigned integer type with the bit width given in operand 1 with /// the following semantics: /// /// * If the value is NaN, zero is returned. /// * If the value is larger/smaller than the largest/smallest integer, /// the largest/smallest integer is returned (saturation). /// * Otherwise the result of rounding the value towards zero is returned. /// /// The width given in operand 1 must be equal to, or smaller than, the scalar /// result type width. It may end up being smaller than the result witdh as a /// result of integer type legalization. FP_TO_SINT_SAT, FP_TO_UINT_SAT, /// X = FP_ROUND(Y, TRUNC) - Rounding 'Y' from a larger floating point type /// down to the precision of the destination VT. TRUNC is a flag, which is /// always an integer that is zero or one. If TRUNC is 0, this is a /// normal rounding, if it is 1, this FP_ROUND is known to not change the /// value of Y. /// /// The TRUNC = 1 case is used in cases where we know that the value will /// not be modified by the node, because Y is not using any of the extra /// precision of source type. This allows certain transformations like /// FP_EXTEND(FP_ROUND(X,1)) -> X which are not safe for /// FP_EXTEND(FP_ROUND(X,0)) because the extra bits aren't removed. FP_ROUND, /// FLT_ROUNDS_ - Returns current rounding mode: /// -1 Undefined /// 0 Round to 0 /// 1 Round to nearest /// 2 Round to +inf /// 3 Round to -inf /// Result is rounding mode and chain. Input is a chain. FLT_ROUNDS_, /// X = FP_EXTEND(Y) - Extend a smaller FP type into a larger FP type. FP_EXTEND, /// BITCAST - This operator converts between integer, vector and FP /// values, as if the value was stored to memory with one type and loaded /// from the same address with the other type (or equivalently for vector /// format conversions, etc). The source and result are required to have /// the same bit size (e.g. f32 <-> i32). This can also be used for /// int-to-int or fp-to-fp conversions, but that is a noop, deleted by /// getNode(). /// /// This operator is subtly different from the bitcast instruction from /// LLVM-IR since this node may change the bits in the register. For /// example, this occurs on big-endian NEON and big-endian MSA where the /// layout of the bits in the register depends on the vector type and this /// operator acts as a shuffle operation for some vector type combinations. BITCAST, /// ADDRSPACECAST - This operator converts between pointers of different /// address spaces. ADDRSPACECAST, /// FP16_TO_FP, FP_TO_FP16 - These operators are used to perform promotions /// and truncation for half-precision (16 bit) floating numbers. These nodes /// form a semi-softened interface for dealing with f16 (as an i16), which /// is often a storage-only type but has native conversions. FP16_TO_FP, FP_TO_FP16, STRICT_FP16_TO_FP, STRICT_FP_TO_FP16, /// Perform various unary floating-point operations inspired by libm. For /// FPOWI, the result is undefined if if the integer operand doesn't fit /// into 32 bits. FNEG, FABS, FSQRT, FCBRT, FSIN, FCOS, FPOWI, FPOW, FLOG, FLOG2, FLOG10, FEXP, FEXP2, FCEIL, FTRUNC, FRINT, FNEARBYINT, FROUND, FROUNDEVEN, FFLOOR, LROUND, LLROUND, LRINT, LLRINT, /// FMINNUM/FMAXNUM - Perform floating-point minimum or maximum on two /// values. // /// In the case where a single input is a NaN (either signaling or quiet), /// the non-NaN input is returned. /// /// The return value of (FMINNUM 0.0, -0.0) could be either 0.0 or -0.0. FMINNUM, FMAXNUM, /// FMINNUM_IEEE/FMAXNUM_IEEE - Perform floating-point minimum or maximum on /// two values, following the IEEE-754 2008 definition. This differs from /// FMINNUM/FMAXNUM in the handling of signaling NaNs. If one input is a /// signaling NaN, returns a quiet NaN. FMINNUM_IEEE, FMAXNUM_IEEE, /// FMINIMUM/FMAXIMUM - NaN-propagating minimum/maximum that also treat -0.0 /// as less than 0.0. While FMINNUM_IEEE/FMAXNUM_IEEE follow IEEE 754-2008 /// semantics, FMINIMUM/FMAXIMUM follow IEEE 754-2018 draft semantics. FMINIMUM, FMAXIMUM, /// FSINCOS - Compute both fsin and fcos as a single operation. FSINCOS, /// LOAD and STORE have token chains as their first operand, then the same /// operands as an LLVM load/store instruction, then an offset node that /// is added / subtracted from the base pointer to form the address (for /// indexed memory ops). LOAD, STORE, /// DYNAMIC_STACKALLOC - Allocate some number of bytes on the stack aligned /// to a specified boundary. This node always has two return values: a new /// stack pointer value and a chain. The first operand is the token chain, /// the second is the number of bytes to allocate, and the third is the /// alignment boundary. The size is guaranteed to be a multiple of the /// stack alignment, and the alignment is guaranteed to be bigger than the /// stack alignment (if required) or 0 to get standard stack alignment. DYNAMIC_STACKALLOC, /// Control flow instructions. These all have token chains. /// BR - Unconditional branch. The first operand is the chain /// operand, the second is the MBB to branch to. BR, /// BRIND - Indirect branch. The first operand is the chain, the second /// is the value to branch to, which must be of the same type as the /// target's pointer type. BRIND, /// BR_JT - Jumptable branch. The first operand is the chain, the second /// is the jumptable index, the last one is the jumptable entry index. BR_JT, /// BRCOND - Conditional branch. The first operand is the chain, the /// second is the condition, the third is the block to branch to if the /// condition is true. If the type of the condition is not i1, then the /// high bits must conform to getBooleanContents. If the condition is undef, /// it nondeterministically jumps to the block. /// TODO: Its semantics w.r.t undef requires further discussion; we need to /// make it sure that it is consistent with optimizations in MIR & the /// meaning of IMPLICIT_DEF. See https://reviews.llvm.org/D92015 BRCOND, /// BR_CC - Conditional branch. The behavior is like that of SELECT_CC, in /// that the condition is represented as condition code, and two nodes to /// compare, rather than as a combined SetCC node. The operands in order /// are chain, cc, lhs, rhs, block to branch to if condition is true. If /// condition is undef, it nondeterministically jumps to the block. BR_CC, /// INLINEASM - Represents an inline asm block. This node always has two /// return values: a chain and a flag result. The inputs are as follows: /// Operand #0 : Input chain. /// Operand #1 : a ExternalSymbolSDNode with a pointer to the asm string. /// Operand #2 : a MDNodeSDNode with the !srcloc metadata. /// Operand #3 : HasSideEffect, IsAlignStack bits. /// After this, it is followed by a list of operands with this format: /// ConstantSDNode: Flags that encode whether it is a mem or not, the /// of operands that follow, etc. See InlineAsm.h. /// ... however many operands ... /// Operand #last: Optional, an incoming flag. /// /// The variable width operands are required to represent target addressing /// modes as a single "operand", even though they may have multiple /// SDOperands. INLINEASM, /// INLINEASM_BR - Branching version of inline asm. Used by asm-goto. INLINEASM_BR, /// EH_LABEL - Represents a label in mid basic block used to track /// locations needed for debug and exception handling tables. These nodes /// take a chain as input and return a chain. EH_LABEL, /// ANNOTATION_LABEL - Represents a mid basic block label used by /// annotations. This should remain within the basic block and be ordered /// with respect to other call instructions, but loads and stores may float /// past it. ANNOTATION_LABEL, /// CATCHRET - Represents a return from a catch block funclet. Used for /// MSVC compatible exception handling. Takes a chain operand and a /// destination basic block operand. CATCHRET, /// CLEANUPRET - Represents a return from a cleanup block funclet. Used for /// MSVC compatible exception handling. Takes only a chain operand. CLEANUPRET, /// STACKSAVE - STACKSAVE has one operand, an input chain. It produces a /// value, the same type as the pointer type for the system, and an output /// chain. STACKSAVE, /// STACKRESTORE has two operands, an input chain and a pointer to restore /// to it returns an output chain. STACKRESTORE, /// CALLSEQ_START/CALLSEQ_END - These operators mark the beginning and end /// of a call sequence, and carry arbitrary information that target might /// want to know. The first operand is a chain, the rest are specified by /// the target and not touched by the DAG optimizers. /// Targets that may use stack to pass call arguments define additional /// operands: /// - size of the call frame part that must be set up within the /// CALLSEQ_START..CALLSEQ_END pair, /// - part of the call frame prepared prior to CALLSEQ_START. /// Both these parameters must be constants, their sum is the total call /// frame size. /// CALLSEQ_START..CALLSEQ_END pairs may not be nested. CALLSEQ_START, // Beginning of a call sequence CALLSEQ_END, // End of a call sequence /// VAARG - VAARG has four operands: an input chain, a pointer, a SRCVALUE, /// and the alignment. It returns a pair of values: the vaarg value and a /// new chain. VAARG, /// VACOPY - VACOPY has 5 operands: an input chain, a destination pointer, /// a source pointer, a SRCVALUE for the destination, and a SRCVALUE for the /// source. VACOPY, /// VAEND, VASTART - VAEND and VASTART have three operands: an input chain, /// pointer, and a SRCVALUE. VAEND, VASTART, // PREALLOCATED_SETUP - This has 2 operands: an input chain and a SRCVALUE // with the preallocated call Value. PREALLOCATED_SETUP, // PREALLOCATED_ARG - This has 3 operands: an input chain, a SRCVALUE // with the preallocated call Value, and a constant int. PREALLOCATED_ARG, /// SRCVALUE - This is a node type that holds a Value* that is used to /// make reference to a value in the LLVM IR. SRCVALUE, /// MDNODE_SDNODE - This is a node that holdes an MDNode*, which is used to /// reference metadata in the IR. MDNODE_SDNODE, /// PCMARKER - This corresponds to the pcmarker intrinsic. PCMARKER, /// READCYCLECOUNTER - This corresponds to the readcyclecounter intrinsic. /// It produces a chain and one i64 value. The only operand is a chain. /// If i64 is not legal, the result will be expanded into smaller values. /// Still, it returns an i64, so targets should set legality for i64. /// The result is the content of the architecture-specific cycle /// counter-like register (or other high accuracy low latency clock source). READCYCLECOUNTER, /// HANDLENODE node - Used as a handle for various purposes. HANDLENODE, /// INIT_TRAMPOLINE - This corresponds to the init_trampoline intrinsic. It /// takes as input a token chain, the pointer to the trampoline, the pointer /// to the nested function, the pointer to pass for the 'nest' parameter, a /// SRCVALUE for the trampoline and another for the nested function /// (allowing targets to access the original Function*). /// It produces a token chain as output. INIT_TRAMPOLINE, /// ADJUST_TRAMPOLINE - This corresponds to the adjust_trampoline intrinsic. /// It takes a pointer to the trampoline and produces a (possibly) new /// pointer to the same trampoline with platform-specific adjustments /// applied. The pointer it returns points to an executable block of code. ADJUST_TRAMPOLINE, /// TRAP - Trapping instruction TRAP, /// DEBUGTRAP - Trap intended to get the attention of a debugger. DEBUGTRAP, /// UBSANTRAP - Trap with an immediate describing the kind of sanitizer failure. UBSANTRAP, /// PREFETCH - This corresponds to a prefetch intrinsic. The first operand /// is the chain. The other operands are the address to prefetch, /// read / write specifier, locality specifier and instruction / data cache /// specifier. PREFETCH, /// OUTCHAIN = ATOMIC_FENCE(INCHAIN, ordering, scope) /// This corresponds to the fence instruction. It takes an input chain, and /// two integer constants: an AtomicOrdering and a SynchronizationScope. ATOMIC_FENCE, /// Val, OUTCHAIN = ATOMIC_LOAD(INCHAIN, ptr) /// This corresponds to "load atomic" instruction. ATOMIC_LOAD, /// OUTCHAIN = ATOMIC_STORE(INCHAIN, ptr, val) /// This corresponds to "store atomic" instruction. ATOMIC_STORE, /// Val, OUTCHAIN = ATOMIC_CMP_SWAP(INCHAIN, ptr, cmp, swap) /// For double-word atomic operations: /// ValLo, ValHi, OUTCHAIN = ATOMIC_CMP_SWAP(INCHAIN, ptr, cmpLo, cmpHi, /// swapLo, swapHi) /// This corresponds to the cmpxchg instruction. ATOMIC_CMP_SWAP, /// Val, Success, OUTCHAIN /// = ATOMIC_CMP_SWAP_WITH_SUCCESS(INCHAIN, ptr, cmp, swap) /// N.b. this is still a strong cmpxchg operation, so /// Success == "Val == cmp". ATOMIC_CMP_SWAP_WITH_SUCCESS, /// Val, OUTCHAIN = ATOMIC_SWAP(INCHAIN, ptr, amt) /// Val, OUTCHAIN = ATOMIC_LOAD_[OpName](INCHAIN, ptr, amt) /// For double-word atomic operations: /// ValLo, ValHi, OUTCHAIN = ATOMIC_SWAP(INCHAIN, ptr, amtLo, amtHi) /// ValLo, ValHi, OUTCHAIN = ATOMIC_LOAD_[OpName](INCHAIN, ptr, amtLo, amtHi) /// These correspond to the atomicrmw instruction. ATOMIC_SWAP, ATOMIC_LOAD_ADD, ATOMIC_LOAD_SUB, ATOMIC_LOAD_AND, ATOMIC_LOAD_CLR, ATOMIC_LOAD_OR, ATOMIC_LOAD_XOR, ATOMIC_LOAD_NAND, ATOMIC_LOAD_MIN, ATOMIC_LOAD_MAX, ATOMIC_LOAD_UMIN, ATOMIC_LOAD_UMAX, ATOMIC_LOAD_FADD, ATOMIC_LOAD_FSUB, // Masked load and store - consecutive vector load and store operations // with additional mask operand that prevents memory accesses to the // masked-off lanes. // // Val, OutChain = MLOAD(BasePtr, Mask, PassThru) // OutChain = MSTORE(Value, BasePtr, Mask) MLOAD, MSTORE, // Masked gather and scatter - load and store operations for a vector of // random addresses with additional mask operand that prevents memory // accesses to the masked-off lanes. // // Val, OutChain = GATHER(InChain, PassThru, Mask, BasePtr, Index, Scale) // OutChain = SCATTER(InChain, Value, Mask, BasePtr, Index, Scale) // // The Index operand can have more vector elements than the other operands // due to type legalization. The extra elements are ignored. MGATHER, MSCATTER, /// This corresponds to the llvm.lifetime.* intrinsics. The first operand /// is the chain and the second operand is the alloca pointer. LIFETIME_START, LIFETIME_END, /// GC_TRANSITION_START/GC_TRANSITION_END - These operators mark the /// beginning and end of GC transition sequence, and carry arbitrary /// information that target might need for lowering. The first operand is /// a chain, the rest are specified by the target and not touched by the DAG /// optimizers. GC_TRANSITION_START..GC_TRANSITION_END pairs may not be /// nested. GC_TRANSITION_START, GC_TRANSITION_END, /// GET_DYNAMIC_AREA_OFFSET - get offset from native SP to the address of /// the most recent dynamic alloca. For most targets that would be 0, but /// for some others (e.g. PowerPC, PowerPC64) that would be compile-time /// known nonzero constant. The only operand here is the chain. GET_DYNAMIC_AREA_OFFSET, /// Pseudo probe for AutoFDO, as a place holder in a basic block to improve /// the sample counts quality. PSEUDO_PROBE, /// VSCALE(IMM) - Returns the runtime scaling factor used to calculate the /// number of elements within a scalable vector. IMM is a constant integer /// multiplier that is applied to the runtime value. VSCALE, /// Generic reduction nodes. These nodes represent horizontal vector /// reduction operations, producing a scalar result. /// The SEQ variants perform reductions in sequential order. The first /// operand is an initial scalar accumulator value, and the second operand /// is the vector to reduce. /// E.g. RES = VECREDUCE_SEQ_FADD f32 ACC, <4 x f32> SRC_VEC /// ... is equivalent to /// RES = (((ACC + SRC_VEC[0]) + SRC_VEC[1]) + SRC_VEC[2]) + SRC_VEC[3] VECREDUCE_SEQ_FADD, VECREDUCE_SEQ_FMUL, /// These reductions have relaxed evaluation order semantics, and have a /// single vector operand. The order of evaluation is unspecified. For /// pow-of-2 vectors, one valid legalizer expansion is to use a tree /// reduction, i.e.: /// For RES = VECREDUCE_FADD <8 x f16> SRC_VEC /// PART_RDX = FADD SRC_VEC[0:3], SRC_VEC[4:7] /// PART_RDX2 = FADD PART_RDX[0:1], PART_RDX[2:3] /// RES = FADD PART_RDX2[0], PART_RDX2[1] /// For non-pow-2 vectors, this can be computed by extracting each element /// and performing the operation as if it were scalarized. VECREDUCE_FADD, VECREDUCE_FMUL, /// FMIN/FMAX nodes can have flags, for NaN/NoNaN variants. VECREDUCE_FMAX, VECREDUCE_FMIN, /// Integer reductions may have a result type larger than the vector element /// type. However, the reduction is performed using the vector element type /// and the value in the top bits is unspecified. VECREDUCE_ADD, VECREDUCE_MUL, VECREDUCE_AND, VECREDUCE_OR, VECREDUCE_XOR, VECREDUCE_SMAX, VECREDUCE_SMIN, VECREDUCE_UMAX, VECREDUCE_UMIN, // Vector Predication #define BEGIN_REGISTER_VP_SDNODE(VPSDID, ...) VPSDID, #include "llvm/IR/VPIntrinsics.def" /// BUILTIN_OP_END - This must be the last enum value in this list. /// The target-specific pre-isel opcode values start here. BUILTIN_OP_END }; /// FIRST_TARGET_STRICTFP_OPCODE - Target-specific pre-isel operations /// which cannot raise FP exceptions should be less than this value. /// Those that do must not be less than this value. static const int FIRST_TARGET_STRICTFP_OPCODE = BUILTIN_OP_END + 400; /// FIRST_TARGET_MEMORY_OPCODE - Target-specific pre-isel operations /// which do not reference a specific memory location should be less than /// this value. Those that do must not be less than this value, and can /// be used with SelectionDAG::getMemIntrinsicNode. static const int FIRST_TARGET_MEMORY_OPCODE = BUILTIN_OP_END + 500; /// Get underlying scalar opcode for VECREDUCE opcode. /// For example ISD::AND for ISD::VECREDUCE_AND. NodeType getVecReduceBaseOpcode(unsigned VecReduceOpcode); /// Whether this is a vector-predicated Opcode. bool isVPOpcode(unsigned Opcode); /// The operand position of the vector mask. Optional getVPMaskIdx(unsigned Opcode); /// The operand position of the explicit vector length parameter. Optional getVPExplicitVectorLengthIdx(unsigned Opcode); //===--------------------------------------------------------------------===// /// MemIndexedMode enum - This enum defines the load / store indexed /// addressing modes. /// /// UNINDEXED "Normal" load / store. The effective address is already /// computed and is available in the base pointer. The offset /// operand is always undefined. In addition to producing a /// chain, an unindexed load produces one value (result of the /// load); an unindexed store does not produce a value. /// /// PRE_INC Similar to the unindexed mode where the effective address is /// PRE_DEC the value of the base pointer add / subtract the offset. /// It considers the computation as being folded into the load / /// store operation (i.e. the load / store does the address /// computation as well as performing the memory transaction). /// The base operand is always undefined. In addition to /// producing a chain, pre-indexed load produces two values /// (result of the load and the result of the address /// computation); a pre-indexed store produces one value (result /// of the address computation). /// /// POST_INC The effective address is the value of the base pointer. The /// POST_DEC value of the offset operand is then added to / subtracted /// from the base after memory transaction. In addition to /// producing a chain, post-indexed load produces two values /// (the result of the load and the result of the base +/- offset /// computation); a post-indexed store produces one value (the /// the result of the base +/- offset computation). enum MemIndexedMode { UNINDEXED = 0, PRE_INC, PRE_DEC, POST_INC, POST_DEC }; static const int LAST_INDEXED_MODE = POST_DEC + 1; //===--------------------------------------------------------------------===// /// MemIndexType enum - This enum defines how to interpret MGATHER/SCATTER's /// index parameter when calculating addresses. /// /// SIGNED_SCALED Addr = Base + ((signed)Index * sizeof(element)) /// SIGNED_UNSCALED Addr = Base + (signed)Index /// UNSIGNED_SCALED Addr = Base + ((unsigned)Index * sizeof(element)) /// UNSIGNED_UNSCALED Addr = Base + (unsigned)Index enum MemIndexType { SIGNED_SCALED = 0, SIGNED_UNSCALED, UNSIGNED_SCALED, UNSIGNED_UNSCALED }; static const int LAST_MEM_INDEX_TYPE = UNSIGNED_UNSCALED + 1; //===--------------------------------------------------------------------===// /// LoadExtType enum - This enum defines the three variants of LOADEXT /// (load with extension). /// /// SEXTLOAD loads the integer operand and sign extends it to a larger /// integer result type. /// ZEXTLOAD loads the integer operand and zero extends it to a larger /// integer result type. /// EXTLOAD is used for two things: floating point extending loads and /// integer extending loads [the top bits are undefined]. enum LoadExtType { NON_EXTLOAD = 0, EXTLOAD, SEXTLOAD, ZEXTLOAD }; static const int LAST_LOADEXT_TYPE = ZEXTLOAD + 1; NodeType getExtForLoadExtType(bool IsFP, LoadExtType); //===--------------------------------------------------------------------===// /// ISD::CondCode enum - These are ordered carefully to make the bitfields /// below work out, when considering SETFALSE (something that never exists /// dynamically) as 0. "U" -> Unsigned (for integer operands) or Unordered /// (for floating point), "L" -> Less than, "G" -> Greater than, "E" -> Equal /// to. If the "N" column is 1, the result of the comparison is undefined if /// the input is a NAN. /// /// All of these (except for the 'always folded ops') should be handled for /// floating point. For integer, only the SETEQ,SETNE,SETLT,SETLE,SETGT, /// SETGE,SETULT,SETULE,SETUGT, and SETUGE opcodes are used. /// /// Note that these are laid out in a specific order to allow bit-twiddling /// to transform conditions. enum CondCode { // Opcode N U L G E Intuitive operation SETFALSE, // 0 0 0 0 Always false (always folded) SETOEQ, // 0 0 0 1 True if ordered and equal SETOGT, // 0 0 1 0 True if ordered and greater than SETOGE, // 0 0 1 1 True if ordered and greater than or equal SETOLT, // 0 1 0 0 True if ordered and less than SETOLE, // 0 1 0 1 True if ordered and less than or equal SETONE, // 0 1 1 0 True if ordered and operands are unequal SETO, // 0 1 1 1 True if ordered (no nans) SETUO, // 1 0 0 0 True if unordered: isnan(X) | isnan(Y) SETUEQ, // 1 0 0 1 True if unordered or equal SETUGT, // 1 0 1 0 True if unordered or greater than SETUGE, // 1 0 1 1 True if unordered, greater than, or equal SETULT, // 1 1 0 0 True if unordered or less than SETULE, // 1 1 0 1 True if unordered, less than, or equal SETUNE, // 1 1 1 0 True if unordered or not equal SETTRUE, // 1 1 1 1 Always true (always folded) // Don't care operations: undefined if the input is a nan. SETFALSE2, // 1 X 0 0 0 Always false (always folded) SETEQ, // 1 X 0 0 1 True if equal SETGT, // 1 X 0 1 0 True if greater than SETGE, // 1 X 0 1 1 True if greater than or equal SETLT, // 1 X 1 0 0 True if less than SETLE, // 1 X 1 0 1 True if less than or equal SETNE, // 1 X 1 1 0 True if not equal SETTRUE2, // 1 X 1 1 1 Always true (always folded) SETCC_INVALID // Marker value. }; /// Return true if this is a setcc instruction that performs a signed /// comparison when used with integer operands. inline bool isSignedIntSetCC(CondCode Code) { return Code == SETGT || Code == SETGE || Code == SETLT || Code == SETLE; } /// Return true if this is a setcc instruction that performs an unsigned /// comparison when used with integer operands. inline bool isUnsignedIntSetCC(CondCode Code) { return Code == SETUGT || Code == SETUGE || Code == SETULT || Code == SETULE; } /// Return true if this is a setcc instruction that performs an equality /// comparison when used with integer operands. inline bool isIntEqualitySetCC(CondCode Code) { return Code == SETEQ || Code == SETNE; } /// Return true if the specified condition returns true if the two operands to /// the condition are equal. Note that if one of the two operands is a NaN, /// this value is meaningless. inline bool isTrueWhenEqual(CondCode Cond) { return ((int)Cond & 1) != 0; } /// This function returns 0 if the condition is always false if an operand is /// a NaN, 1 if the condition is always true if the operand is a NaN, and 2 if /// the condition is undefined if the operand is a NaN. inline unsigned getUnorderedFlavor(CondCode Cond) { return ((int)Cond >> 3) & 3; } /// Return the operation corresponding to !(X op Y), where 'op' is a valid /// SetCC operation. CondCode getSetCCInverse(CondCode Operation, EVT Type); namespace GlobalISel { /// Return the operation corresponding to !(X op Y), where 'op' is a valid /// SetCC operation. The U bit of the condition code has different meanings /// between floating point and integer comparisons and LLT's don't provide /// this distinction. As such we need to be told whether the comparison is /// floating point or integer-like. Pointers should use integer-like /// comparisons. CondCode getSetCCInverse(CondCode Operation, bool isIntegerLike); } // end namespace GlobalISel /// Return the operation corresponding to (Y op X) when given the operation /// for (X op Y). CondCode getSetCCSwappedOperands(CondCode Operation); /// Return the result of a logical OR between different comparisons of /// identical values: ((X op1 Y) | (X op2 Y)). This function returns /// SETCC_INVALID if it is not possible to represent the resultant comparison. CondCode getSetCCOrOperation(CondCode Op1, CondCode Op2, EVT Type); /// Return the result of a logical AND between different comparisons of /// identical values: ((X op1 Y) & (X op2 Y)). This function returns /// SETCC_INVALID if it is not possible to represent the resultant comparison. CondCode getSetCCAndOperation(CondCode Op1, CondCode Op2, EVT Type); } // namespace ISD } // namespace llvm #endif