490 lines
12 KiB
C
490 lines
12 KiB
C
// SPDX-License-Identifier: GPL-2.0-only
|
|
/*
|
|
* linux/arch/arm/mach-sa1100/generic.c
|
|
*
|
|
* Author: Nicolas Pitre
|
|
*
|
|
* Code common to all SA11x0 machines.
|
|
*/
|
|
#include <linux/gpio.h>
|
|
#include <linux/gpio/machine.h>
|
|
#include <linux/module.h>
|
|
#include <linux/kernel.h>
|
|
#include <linux/init.h>
|
|
#include <linux/delay.h>
|
|
#include <linux/dma-mapping.h>
|
|
#include <linux/pm.h>
|
|
#include <linux/cpufreq.h>
|
|
#include <linux/ioport.h>
|
|
#include <linux/platform_device.h>
|
|
#include <linux/reboot.h>
|
|
#include <linux/regulator/fixed.h>
|
|
#include <linux/regulator/machine.h>
|
|
#include <linux/irqchip/irq-sa11x0.h>
|
|
|
|
#include <video/sa1100fb.h>
|
|
|
|
#include <soc/sa1100/pwer.h>
|
|
|
|
#include <asm/div64.h>
|
|
#include <asm/mach/map.h>
|
|
#include <asm/mach/flash.h>
|
|
#include <asm/irq.h>
|
|
#include <asm/system_misc.h>
|
|
|
|
#include <mach/hardware.h>
|
|
#include <mach/irqs.h>
|
|
#include <mach/reset.h>
|
|
|
|
#include "generic.h"
|
|
#include <clocksource/pxa.h>
|
|
|
|
#define NR_FREQS 16
|
|
|
|
/*
|
|
* This table is setup for a 3.6864MHz Crystal.
|
|
*/
|
|
struct cpufreq_frequency_table sa11x0_freq_table[NR_FREQS+1] = {
|
|
{ .frequency = 59000, /* 59.0 MHz */},
|
|
{ .frequency = 73700, /* 73.7 MHz */},
|
|
{ .frequency = 88500, /* 88.5 MHz */},
|
|
{ .frequency = 103200, /* 103.2 MHz */},
|
|
{ .frequency = 118000, /* 118.0 MHz */},
|
|
{ .frequency = 132700, /* 132.7 MHz */},
|
|
{ .frequency = 147500, /* 147.5 MHz */},
|
|
{ .frequency = 162200, /* 162.2 MHz */},
|
|
{ .frequency = 176900, /* 176.9 MHz */},
|
|
{ .frequency = 191700, /* 191.7 MHz */},
|
|
{ .frequency = 206400, /* 206.4 MHz */},
|
|
{ .frequency = 221200, /* 221.2 MHz */},
|
|
{ .frequency = 235900, /* 235.9 MHz */},
|
|
{ .frequency = 250700, /* 250.7 MHz */},
|
|
{ .frequency = 265400, /* 265.4 MHz */},
|
|
{ .frequency = 280200, /* 280.2 MHz */},
|
|
{ .frequency = CPUFREQ_TABLE_END, },
|
|
};
|
|
|
|
unsigned int sa11x0_getspeed(unsigned int cpu)
|
|
{
|
|
if (cpu)
|
|
return 0;
|
|
return sa11x0_freq_table[PPCR & 0xf].frequency;
|
|
}
|
|
|
|
/*
|
|
* Default power-off for SA1100
|
|
*/
|
|
static void sa1100_power_off(void)
|
|
{
|
|
mdelay(100);
|
|
local_irq_disable();
|
|
/* disable internal oscillator, float CS lines */
|
|
PCFR = (PCFR_OPDE | PCFR_FP | PCFR_FS);
|
|
/* enable wake-up on GPIO0 (Assabet...) */
|
|
PWER = GFER = GRER = 1;
|
|
/*
|
|
* set scratchpad to zero, just in case it is used as a
|
|
* restart address by the bootloader.
|
|
*/
|
|
PSPR = 0;
|
|
/* enter sleep mode */
|
|
PMCR = PMCR_SF;
|
|
}
|
|
|
|
void sa11x0_restart(enum reboot_mode mode, const char *cmd)
|
|
{
|
|
clear_reset_status(RESET_STATUS_ALL);
|
|
|
|
if (mode == REBOOT_SOFT) {
|
|
/* Jump into ROM at address 0 */
|
|
soft_restart(0);
|
|
} else {
|
|
/* Use on-chip reset capability */
|
|
RSRR = RSRR_SWR;
|
|
}
|
|
}
|
|
|
|
static void sa11x0_register_device(struct platform_device *dev, void *data)
|
|
{
|
|
int err;
|
|
dev->dev.platform_data = data;
|
|
err = platform_device_register(dev);
|
|
if (err)
|
|
printk(KERN_ERR "Unable to register device %s: %d\n",
|
|
dev->name, err);
|
|
}
|
|
|
|
|
|
static struct resource sa11x0udc_resources[] = {
|
|
[0] = DEFINE_RES_MEM(__PREG(Ser0UDCCR), SZ_64K),
|
|
[1] = DEFINE_RES_IRQ(IRQ_Ser0UDC),
|
|
};
|
|
|
|
static u64 sa11x0udc_dma_mask = 0xffffffffUL;
|
|
|
|
static struct platform_device sa11x0udc_device = {
|
|
.name = "sa11x0-udc",
|
|
.id = -1,
|
|
.dev = {
|
|
.dma_mask = &sa11x0udc_dma_mask,
|
|
.coherent_dma_mask = 0xffffffff,
|
|
},
|
|
.num_resources = ARRAY_SIZE(sa11x0udc_resources),
|
|
.resource = sa11x0udc_resources,
|
|
};
|
|
|
|
static struct resource sa11x0uart1_resources[] = {
|
|
[0] = DEFINE_RES_MEM(__PREG(Ser1UTCR0), SZ_64K),
|
|
[1] = DEFINE_RES_IRQ(IRQ_Ser1UART),
|
|
};
|
|
|
|
static struct platform_device sa11x0uart1_device = {
|
|
.name = "sa11x0-uart",
|
|
.id = 1,
|
|
.num_resources = ARRAY_SIZE(sa11x0uart1_resources),
|
|
.resource = sa11x0uart1_resources,
|
|
};
|
|
|
|
static struct resource sa11x0uart3_resources[] = {
|
|
[0] = DEFINE_RES_MEM(__PREG(Ser3UTCR0), SZ_64K),
|
|
[1] = DEFINE_RES_IRQ(IRQ_Ser3UART),
|
|
};
|
|
|
|
static struct platform_device sa11x0uart3_device = {
|
|
.name = "sa11x0-uart",
|
|
.id = 3,
|
|
.num_resources = ARRAY_SIZE(sa11x0uart3_resources),
|
|
.resource = sa11x0uart3_resources,
|
|
};
|
|
|
|
static struct resource sa11x0mcp_resources[] = {
|
|
[0] = DEFINE_RES_MEM(__PREG(Ser4MCCR0), SZ_64K),
|
|
[1] = DEFINE_RES_MEM(__PREG(Ser4MCCR1), 4),
|
|
[2] = DEFINE_RES_IRQ(IRQ_Ser4MCP),
|
|
};
|
|
|
|
static u64 sa11x0mcp_dma_mask = 0xffffffffUL;
|
|
|
|
static struct platform_device sa11x0mcp_device = {
|
|
.name = "sa11x0-mcp",
|
|
.id = -1,
|
|
.dev = {
|
|
.dma_mask = &sa11x0mcp_dma_mask,
|
|
.coherent_dma_mask = 0xffffffff,
|
|
},
|
|
.num_resources = ARRAY_SIZE(sa11x0mcp_resources),
|
|
.resource = sa11x0mcp_resources,
|
|
};
|
|
|
|
void __init sa11x0_ppc_configure_mcp(void)
|
|
{
|
|
/* Setup the PPC unit for the MCP */
|
|
PPDR &= ~PPC_RXD4;
|
|
PPDR |= PPC_TXD4 | PPC_SCLK | PPC_SFRM;
|
|
PSDR |= PPC_RXD4;
|
|
PSDR &= ~(PPC_TXD4 | PPC_SCLK | PPC_SFRM);
|
|
PPSR &= ~(PPC_TXD4 | PPC_SCLK | PPC_SFRM);
|
|
}
|
|
|
|
void sa11x0_register_mcp(struct mcp_plat_data *data)
|
|
{
|
|
sa11x0_register_device(&sa11x0mcp_device, data);
|
|
}
|
|
|
|
static struct resource sa11x0ssp_resources[] = {
|
|
[0] = DEFINE_RES_MEM(0x80070000, SZ_64K),
|
|
[1] = DEFINE_RES_IRQ(IRQ_Ser4SSP),
|
|
};
|
|
|
|
static u64 sa11x0ssp_dma_mask = 0xffffffffUL;
|
|
|
|
static struct platform_device sa11x0ssp_device = {
|
|
.name = "sa11x0-ssp",
|
|
.id = -1,
|
|
.dev = {
|
|
.dma_mask = &sa11x0ssp_dma_mask,
|
|
.coherent_dma_mask = 0xffffffff,
|
|
},
|
|
.num_resources = ARRAY_SIZE(sa11x0ssp_resources),
|
|
.resource = sa11x0ssp_resources,
|
|
};
|
|
|
|
static struct resource sa11x0fb_resources[] = {
|
|
[0] = DEFINE_RES_MEM(0xb0100000, SZ_64K),
|
|
[1] = DEFINE_RES_IRQ(IRQ_LCD),
|
|
};
|
|
|
|
static struct platform_device sa11x0fb_device = {
|
|
.name = "sa11x0-fb",
|
|
.id = -1,
|
|
.dev = {
|
|
.coherent_dma_mask = 0xffffffff,
|
|
},
|
|
.num_resources = ARRAY_SIZE(sa11x0fb_resources),
|
|
.resource = sa11x0fb_resources,
|
|
};
|
|
|
|
void sa11x0_register_lcd(struct sa1100fb_mach_info *inf)
|
|
{
|
|
sa11x0_register_device(&sa11x0fb_device, inf);
|
|
}
|
|
|
|
void sa11x0_register_pcmcia(int socket, struct gpiod_lookup_table *table)
|
|
{
|
|
if (table)
|
|
gpiod_add_lookup_table(table);
|
|
platform_device_register_simple("sa11x0-pcmcia", socket, NULL, 0);
|
|
}
|
|
|
|
static struct platform_device sa11x0mtd_device = {
|
|
.name = "sa1100-mtd",
|
|
.id = -1,
|
|
};
|
|
|
|
void sa11x0_register_mtd(struct flash_platform_data *flash,
|
|
struct resource *res, int nr)
|
|
{
|
|
flash->name = "sa1100";
|
|
sa11x0mtd_device.resource = res;
|
|
sa11x0mtd_device.num_resources = nr;
|
|
sa11x0_register_device(&sa11x0mtd_device, flash);
|
|
}
|
|
|
|
static struct resource sa11x0ir_resources[] = {
|
|
DEFINE_RES_MEM(__PREG(Ser2UTCR0), 0x24),
|
|
DEFINE_RES_MEM(__PREG(Ser2HSCR0), 0x1c),
|
|
DEFINE_RES_MEM(__PREG(Ser2HSCR2), 0x04),
|
|
DEFINE_RES_IRQ(IRQ_Ser2ICP),
|
|
};
|
|
|
|
static struct platform_device sa11x0ir_device = {
|
|
.name = "sa11x0-ir",
|
|
.id = -1,
|
|
.num_resources = ARRAY_SIZE(sa11x0ir_resources),
|
|
.resource = sa11x0ir_resources,
|
|
};
|
|
|
|
void sa11x0_register_irda(struct irda_platform_data *irda)
|
|
{
|
|
sa11x0_register_device(&sa11x0ir_device, irda);
|
|
}
|
|
|
|
static struct resource sa1100_rtc_resources[] = {
|
|
DEFINE_RES_MEM(0x90010000, 0x40),
|
|
DEFINE_RES_IRQ_NAMED(IRQ_RTC1Hz, "rtc 1Hz"),
|
|
DEFINE_RES_IRQ_NAMED(IRQ_RTCAlrm, "rtc alarm"),
|
|
};
|
|
|
|
static struct platform_device sa11x0rtc_device = {
|
|
.name = "sa1100-rtc",
|
|
.id = -1,
|
|
.num_resources = ARRAY_SIZE(sa1100_rtc_resources),
|
|
.resource = sa1100_rtc_resources,
|
|
};
|
|
|
|
static struct resource sa11x0dma_resources[] = {
|
|
DEFINE_RES_MEM(DMA_PHYS, DMA_SIZE),
|
|
DEFINE_RES_IRQ(IRQ_DMA0),
|
|
DEFINE_RES_IRQ(IRQ_DMA1),
|
|
DEFINE_RES_IRQ(IRQ_DMA2),
|
|
DEFINE_RES_IRQ(IRQ_DMA3),
|
|
DEFINE_RES_IRQ(IRQ_DMA4),
|
|
DEFINE_RES_IRQ(IRQ_DMA5),
|
|
};
|
|
|
|
static u64 sa11x0dma_dma_mask = DMA_BIT_MASK(32);
|
|
|
|
static struct platform_device sa11x0dma_device = {
|
|
.name = "sa11x0-dma",
|
|
.id = -1,
|
|
.dev = {
|
|
.dma_mask = &sa11x0dma_dma_mask,
|
|
.coherent_dma_mask = 0xffffffff,
|
|
},
|
|
.num_resources = ARRAY_SIZE(sa11x0dma_resources),
|
|
.resource = sa11x0dma_resources,
|
|
};
|
|
|
|
static struct platform_device *sa11x0_devices[] __initdata = {
|
|
&sa11x0udc_device,
|
|
&sa11x0uart1_device,
|
|
&sa11x0uart3_device,
|
|
&sa11x0ssp_device,
|
|
&sa11x0rtc_device,
|
|
&sa11x0dma_device,
|
|
};
|
|
|
|
static int __init sa1100_init(void)
|
|
{
|
|
struct resource wdt_res = DEFINE_RES_MEM(0x90000000, 0x20);
|
|
pm_power_off = sa1100_power_off;
|
|
|
|
regulator_has_full_constraints();
|
|
|
|
platform_device_register_simple("sa1100_wdt", -1, &wdt_res, 1);
|
|
|
|
return platform_add_devices(sa11x0_devices, ARRAY_SIZE(sa11x0_devices));
|
|
}
|
|
|
|
arch_initcall(sa1100_init);
|
|
|
|
void __init sa11x0_init_late(void)
|
|
{
|
|
sa11x0_pm_init();
|
|
}
|
|
|
|
int __init sa11x0_register_fixed_regulator(int n,
|
|
struct fixed_voltage_config *cfg,
|
|
struct regulator_consumer_supply *supplies, unsigned num_supplies,
|
|
bool uses_gpio)
|
|
{
|
|
struct regulator_init_data *id;
|
|
|
|
cfg->init_data = id = kzalloc(sizeof(*cfg->init_data), GFP_KERNEL);
|
|
if (!cfg->init_data)
|
|
return -ENOMEM;
|
|
|
|
if (!uses_gpio)
|
|
id->constraints.always_on = 1;
|
|
id->constraints.name = cfg->supply_name;
|
|
id->constraints.min_uV = cfg->microvolts;
|
|
id->constraints.max_uV = cfg->microvolts;
|
|
id->constraints.valid_modes_mask = REGULATOR_MODE_NORMAL;
|
|
id->constraints.valid_ops_mask = REGULATOR_CHANGE_STATUS;
|
|
id->consumer_supplies = supplies;
|
|
id->num_consumer_supplies = num_supplies;
|
|
|
|
platform_device_register_resndata(NULL, "reg-fixed-voltage", n,
|
|
NULL, 0, cfg, sizeof(*cfg));
|
|
return 0;
|
|
}
|
|
|
|
/*
|
|
* Common I/O mapping:
|
|
*
|
|
* Typically, static virtual address mappings are as follow:
|
|
*
|
|
* 0xf0000000-0xf3ffffff: miscellaneous stuff (CPLDs, etc.)
|
|
* 0xf4000000-0xf4ffffff: SA-1111
|
|
* 0xf5000000-0xf5ffffff: reserved (used by cache flushing area)
|
|
* 0xf6000000-0xfffeffff: reserved (internal SA1100 IO defined above)
|
|
* 0xffff0000-0xffff0fff: SA1100 exception vectors
|
|
* 0xffff2000-0xffff2fff: Minicache copy_user_page area
|
|
*
|
|
* Below 0xe8000000 is reserved for vm allocation.
|
|
*
|
|
* The machine specific code must provide the extra mapping beside the
|
|
* default mapping provided here.
|
|
*/
|
|
|
|
static struct map_desc standard_io_desc[] __initdata = {
|
|
{ /* PCM */
|
|
.virtual = 0xf8000000,
|
|
.pfn = __phys_to_pfn(0x80000000),
|
|
.length = 0x00100000,
|
|
.type = MT_DEVICE
|
|
}, { /* SCM */
|
|
.virtual = 0xfa000000,
|
|
.pfn = __phys_to_pfn(0x90000000),
|
|
.length = 0x00100000,
|
|
.type = MT_DEVICE
|
|
}, { /* MER */
|
|
.virtual = 0xfc000000,
|
|
.pfn = __phys_to_pfn(0xa0000000),
|
|
.length = 0x00100000,
|
|
.type = MT_DEVICE
|
|
}, { /* LCD + DMA */
|
|
.virtual = 0xfe000000,
|
|
.pfn = __phys_to_pfn(0xb0000000),
|
|
.length = 0x00200000,
|
|
.type = MT_DEVICE
|
|
},
|
|
};
|
|
|
|
void __init sa1100_map_io(void)
|
|
{
|
|
iotable_init(standard_io_desc, ARRAY_SIZE(standard_io_desc));
|
|
}
|
|
|
|
void __init sa1100_timer_init(void)
|
|
{
|
|
pxa_timer_nodt_init(IRQ_OST0, io_p2v(0x90000000));
|
|
}
|
|
|
|
static struct resource irq_resource =
|
|
DEFINE_RES_MEM_NAMED(0x90050000, SZ_64K, "irqs");
|
|
|
|
void __init sa1100_init_irq(void)
|
|
{
|
|
request_resource(&iomem_resource, &irq_resource);
|
|
|
|
sa11x0_init_irq_nodt(IRQ_GPIO0_SC, irq_resource.start);
|
|
|
|
sa1100_init_gpio();
|
|
sa11xx_clk_init();
|
|
}
|
|
|
|
/*
|
|
* Disable the memory bus request/grant signals on the SA1110 to
|
|
* ensure that we don't receive spurious memory requests. We set
|
|
* the MBGNT signal false to ensure the SA1111 doesn't own the
|
|
* SDRAM bus.
|
|
*/
|
|
void sa1110_mb_disable(void)
|
|
{
|
|
unsigned long flags;
|
|
|
|
local_irq_save(flags);
|
|
|
|
PGSR &= ~GPIO_MBGNT;
|
|
GPCR = GPIO_MBGNT;
|
|
GPDR = (GPDR & ~GPIO_MBREQ) | GPIO_MBGNT;
|
|
|
|
GAFR &= ~(GPIO_MBGNT | GPIO_MBREQ);
|
|
|
|
local_irq_restore(flags);
|
|
}
|
|
|
|
/*
|
|
* If the system is going to use the SA-1111 DMA engines, set up
|
|
* the memory bus request/grant pins.
|
|
*/
|
|
void sa1110_mb_enable(void)
|
|
{
|
|
unsigned long flags;
|
|
|
|
local_irq_save(flags);
|
|
|
|
PGSR &= ~GPIO_MBGNT;
|
|
GPCR = GPIO_MBGNT;
|
|
GPDR = (GPDR & ~GPIO_MBREQ) | GPIO_MBGNT;
|
|
|
|
GAFR |= (GPIO_MBGNT | GPIO_MBREQ);
|
|
TUCR |= TUCR_MR;
|
|
|
|
local_irq_restore(flags);
|
|
}
|
|
|
|
int sa11x0_gpio_set_wake(unsigned int gpio, unsigned int on)
|
|
{
|
|
if (on)
|
|
PWER |= BIT(gpio);
|
|
else
|
|
PWER &= ~BIT(gpio);
|
|
|
|
return 0;
|
|
}
|
|
|
|
int sa11x0_sc_set_wake(unsigned int irq, unsigned int on)
|
|
{
|
|
if (BIT(irq) != IC_RTCAlrm)
|
|
return -EINVAL;
|
|
|
|
if (on)
|
|
PWER |= PWER_RTC;
|
|
else
|
|
PWER &= ~PWER_RTC;
|
|
|
|
return 0;
|
|
}
|