149 lines
4.7 KiB
ArmAsm
149 lines
4.7 KiB
ArmAsm
/* SPDX-License-Identifier: GPL-2.0-only */
|
|
/*
|
|
* arch/arm/mach-lpc32xx/suspend.S
|
|
*
|
|
* Original authors: Dmitry Chigirev, Vitaly Wool <source@mvista.com>
|
|
* Modified by Kevin Wells <kevin.wells@nxp.com>
|
|
*
|
|
* 2005 (c) MontaVista Software, Inc.
|
|
*/
|
|
#include <linux/linkage.h>
|
|
#include <asm/assembler.h>
|
|
#include "lpc32xx.h"
|
|
|
|
/* Using named register defines makes the code easier to follow */
|
|
#define WORK1_REG r0
|
|
#define WORK2_REG r1
|
|
#define SAVED_HCLK_DIV_REG r2
|
|
#define SAVED_HCLK_PLL_REG r3
|
|
#define SAVED_DRAM_CLKCTRL_REG r4
|
|
#define SAVED_PWR_CTRL_REG r5
|
|
#define CLKPWRBASE_REG r6
|
|
#define EMCBASE_REG r7
|
|
|
|
#define LPC32XX_EMC_STATUS_OFFS 0x04
|
|
#define LPC32XX_EMC_STATUS_BUSY 0x1
|
|
#define LPC32XX_EMC_STATUS_SELF_RFSH 0x4
|
|
|
|
#define LPC32XX_CLKPWR_PWR_CTRL_OFFS 0x44
|
|
#define LPC32XX_CLKPWR_HCLK_DIV_OFFS 0x40
|
|
#define LPC32XX_CLKPWR_HCLKPLL_CTRL_OFFS 0x58
|
|
|
|
#define CLKPWR_PCLK_DIV_MASK 0xFFFFFE7F
|
|
|
|
.text
|
|
|
|
ENTRY(lpc32xx_sys_suspend)
|
|
@ Save a copy of the used registers in IRAM, r0 is corrupted
|
|
adr r0, tmp_stack_end
|
|
stmfd r0!, {r3 - r7, sp, lr}
|
|
|
|
@ Load a few common register addresses
|
|
adr WORK1_REG, reg_bases
|
|
ldr CLKPWRBASE_REG, [WORK1_REG, #0]
|
|
ldr EMCBASE_REG, [WORK1_REG, #4]
|
|
|
|
ldr SAVED_PWR_CTRL_REG, [CLKPWRBASE_REG,\
|
|
#LPC32XX_CLKPWR_PWR_CTRL_OFFS]
|
|
orr WORK1_REG, SAVED_PWR_CTRL_REG, #LPC32XX_CLKPWR_SDRAM_SELF_RFSH
|
|
|
|
@ Wait for SDRAM busy status to go busy and then idle
|
|
@ This guarantees a small windows where DRAM isn't busy
|
|
1:
|
|
ldr WORK2_REG, [EMCBASE_REG, #LPC32XX_EMC_STATUS_OFFS]
|
|
and WORK2_REG, WORK2_REG, #LPC32XX_EMC_STATUS_BUSY
|
|
cmp WORK2_REG, #LPC32XX_EMC_STATUS_BUSY
|
|
bne 1b @ Branch while idle
|
|
2:
|
|
ldr WORK2_REG, [EMCBASE_REG, #LPC32XX_EMC_STATUS_OFFS]
|
|
and WORK2_REG, WORK2_REG, #LPC32XX_EMC_STATUS_BUSY
|
|
cmp WORK2_REG, #LPC32XX_EMC_STATUS_BUSY
|
|
beq 2b @ Branch until idle
|
|
|
|
@ Setup self-refresh with support for manual exit of
|
|
@ self-refresh mode
|
|
str WORK1_REG, [CLKPWRBASE_REG, #LPC32XX_CLKPWR_PWR_CTRL_OFFS]
|
|
orr WORK2_REG, WORK1_REG, #LPC32XX_CLKPWR_UPD_SDRAM_SELF_RFSH
|
|
str WORK2_REG, [CLKPWRBASE_REG, #LPC32XX_CLKPWR_PWR_CTRL_OFFS]
|
|
str WORK1_REG, [CLKPWRBASE_REG, #LPC32XX_CLKPWR_PWR_CTRL_OFFS]
|
|
|
|
@ Wait for self-refresh acknowledge, clocks to the DRAM device
|
|
@ will automatically stop on start of self-refresh
|
|
3:
|
|
ldr WORK2_REG, [EMCBASE_REG, #LPC32XX_EMC_STATUS_OFFS]
|
|
and WORK2_REG, WORK2_REG, #LPC32XX_EMC_STATUS_SELF_RFSH
|
|
cmp WORK2_REG, #LPC32XX_EMC_STATUS_SELF_RFSH
|
|
bne 3b @ Branch until self-refresh mode starts
|
|
|
|
@ Enter direct-run mode from run mode
|
|
bic WORK1_REG, WORK1_REG, #LPC32XX_CLKPWR_SELECT_RUN_MODE
|
|
str WORK1_REG, [CLKPWRBASE_REG, #LPC32XX_CLKPWR_PWR_CTRL_OFFS]
|
|
|
|
@ Safe disable of DRAM clock in EMC block, prevents DDR sync
|
|
@ issues on restart
|
|
ldr SAVED_HCLK_DIV_REG, [CLKPWRBASE_REG,\
|
|
#LPC32XX_CLKPWR_HCLK_DIV_OFFS]
|
|
and WORK2_REG, SAVED_HCLK_DIV_REG, #CLKPWR_PCLK_DIV_MASK
|
|
str WORK2_REG, [CLKPWRBASE_REG, #LPC32XX_CLKPWR_HCLK_DIV_OFFS]
|
|
|
|
@ Save HCLK PLL state and disable HCLK PLL
|
|
ldr SAVED_HCLK_PLL_REG, [CLKPWRBASE_REG,\
|
|
#LPC32XX_CLKPWR_HCLKPLL_CTRL_OFFS]
|
|
bic WORK2_REG, SAVED_HCLK_PLL_REG, #LPC32XX_CLKPWR_HCLKPLL_POWER_UP
|
|
str WORK2_REG, [CLKPWRBASE_REG, #LPC32XX_CLKPWR_HCLKPLL_CTRL_OFFS]
|
|
|
|
@ Enter stop mode until an enabled event occurs
|
|
orr WORK1_REG, WORK1_REG, #LPC32XX_CLKPWR_STOP_MODE_CTRL
|
|
str WORK1_REG, [CLKPWRBASE_REG, #LPC32XX_CLKPWR_PWR_CTRL_OFFS]
|
|
.rept 9
|
|
nop
|
|
.endr
|
|
|
|
@ Clear stop status
|
|
bic WORK1_REG, WORK1_REG, #LPC32XX_CLKPWR_STOP_MODE_CTRL
|
|
|
|
@ Restore original HCLK PLL value and wait for PLL lock
|
|
str SAVED_HCLK_PLL_REG, [CLKPWRBASE_REG,\
|
|
#LPC32XX_CLKPWR_HCLKPLL_CTRL_OFFS]
|
|
4:
|
|
ldr WORK2_REG, [CLKPWRBASE_REG, #LPC32XX_CLKPWR_HCLKPLL_CTRL_OFFS]
|
|
and WORK2_REG, WORK2_REG, #LPC32XX_CLKPWR_HCLKPLL_PLL_STS
|
|
bne 4b
|
|
|
|
@ Re-enter run mode with self-refresh flag cleared, but no DRAM
|
|
@ update yet. DRAM is still in self-refresh
|
|
str SAVED_PWR_CTRL_REG, [CLKPWRBASE_REG,\
|
|
#LPC32XX_CLKPWR_PWR_CTRL_OFFS]
|
|
|
|
@ Restore original DRAM clock mode to restore DRAM clocks
|
|
str SAVED_HCLK_DIV_REG, [CLKPWRBASE_REG,\
|
|
#LPC32XX_CLKPWR_HCLK_DIV_OFFS]
|
|
|
|
@ Clear self-refresh mode
|
|
orr WORK1_REG, SAVED_PWR_CTRL_REG,\
|
|
#LPC32XX_CLKPWR_UPD_SDRAM_SELF_RFSH
|
|
str WORK1_REG, [CLKPWRBASE_REG, #LPC32XX_CLKPWR_PWR_CTRL_OFFS]
|
|
str SAVED_PWR_CTRL_REG, [CLKPWRBASE_REG,\
|
|
#LPC32XX_CLKPWR_PWR_CTRL_OFFS]
|
|
|
|
@ Wait for EMC to clear self-refresh mode
|
|
5:
|
|
ldr WORK2_REG, [EMCBASE_REG, #LPC32XX_EMC_STATUS_OFFS]
|
|
and WORK2_REG, WORK2_REG, #LPC32XX_EMC_STATUS_SELF_RFSH
|
|
bne 5b @ Branch until self-refresh has exited
|
|
|
|
@ restore regs and return
|
|
adr r0, tmp_stack
|
|
ldmfd r0!, {r3 - r7, sp, pc}
|
|
|
|
reg_bases:
|
|
.long IO_ADDRESS(LPC32XX_CLK_PM_BASE)
|
|
.long IO_ADDRESS(LPC32XX_EMC_BASE)
|
|
|
|
tmp_stack:
|
|
.long 0, 0, 0, 0, 0, 0, 0
|
|
tmp_stack_end:
|
|
|
|
ENTRY(lpc32xx_sys_suspend_sz)
|
|
.word . - lpc32xx_sys_suspend
|