70 lines
2.4 KiB
Plaintext
70 lines
2.4 KiB
Plaintext
* Run Control and Power Management
|
|
-------------------------------------------
|
|
The RCPM performs all device-level tasks associated with device run control
|
|
and power management.
|
|
|
|
Required properites:
|
|
- reg : Offset and length of the register set of the RCPM block.
|
|
- #fsl,rcpm-wakeup-cells : The number of IPPDEXPCR register cells in the
|
|
fsl,rcpm-wakeup property.
|
|
- compatible : Must contain a chip-specific RCPM block compatible string
|
|
and (if applicable) may contain a chassis-version RCPM compatible
|
|
string. Chip-specific strings are of the form "fsl,<chip>-rcpm",
|
|
such as:
|
|
* "fsl,p2041-rcpm"
|
|
* "fsl,p5020-rcpm"
|
|
* "fsl,t4240-rcpm"
|
|
|
|
Chassis-version strings are of the form "fsl,qoriq-rcpm-<version>",
|
|
such as:
|
|
* "fsl,qoriq-rcpm-1.0": for chassis 1.0 rcpm
|
|
* "fsl,qoriq-rcpm-2.0": for chassis 2.0 rcpm
|
|
* "fsl,qoriq-rcpm-2.1": for chassis 2.1 rcpm
|
|
* "fsl,qoriq-rcpm-2.1+": for chassis 2.1+ rcpm
|
|
|
|
All references to "1.0" and "2.0" refer to the QorIQ chassis version to
|
|
which the chip complies.
|
|
Chassis Version Example Chips
|
|
--------------- -------------------------------
|
|
1.0 p4080, p5020, p5040, p2041, p3041
|
|
2.0 t4240, b4860, b4420
|
|
2.1 t1040,
|
|
2.1+ ls1021a, ls1012a, ls1043a, ls1046a
|
|
|
|
Optional properties:
|
|
- little-endian : RCPM register block is Little Endian. Without it RCPM
|
|
will be Big Endian (default case).
|
|
|
|
Example:
|
|
The RCPM node for T4240:
|
|
rcpm: global-utilities@e2000 {
|
|
compatible = "fsl,t4240-rcpm", "fsl,qoriq-rcpm-2.0";
|
|
reg = <0xe2000 0x1000>;
|
|
#fsl,rcpm-wakeup-cells = <2>;
|
|
};
|
|
|
|
* Freescale RCPM Wakeup Source Device Tree Bindings
|
|
-------------------------------------------
|
|
Required fsl,rcpm-wakeup property should be added to a device node if the device
|
|
can be used as a wakeup source.
|
|
|
|
- fsl,rcpm-wakeup: Consists of a phandle to the rcpm node and the IPPDEXPCR
|
|
register cells. The number of IPPDEXPCR register cells is defined in
|
|
"#fsl,rcpm-wakeup-cells" in the rcpm node. The first register cell is
|
|
the bit mask that should be set in IPPDEXPCR0, and the second register
|
|
cell is for IPPDEXPCR1, and so on.
|
|
|
|
Note: IPPDEXPCR(IP Powerdown Exception Control Register) provides a
|
|
mechanism for keeping certain blocks awake during STANDBY and MEM, in
|
|
order to use them as wake-up sources.
|
|
|
|
Example:
|
|
lpuart0: serial@2950000 {
|
|
compatible = "fsl,ls1021a-lpuart";
|
|
reg = <0x0 0x2950000 0x0 0x1000>;
|
|
interrupts = <GIC_SPI 80 IRQ_TYPE_LEVEL_HIGH>;
|
|
clocks = <&sysclk>;
|
|
clock-names = "ipg";
|
|
fsl,rcpm-wakeup = <&rcpm 0x0 0x40000000>;
|
|
};
|