linuxdebug/Documentation/devicetree/bindings/pci/layerscape-pcie-gen4.txt

53 lines
2.3 KiB
Plaintext

NXP Layerscape PCIe Gen4 controller
This PCIe controller is based on the Mobiveil PCIe IP and thus inherits all
the common properties defined in mobiveil-pcie.txt.
Required properties:
- compatible: should contain the platform identifier such as:
"fsl,lx2160a-pcie"
- reg: base addresses and lengths of the PCIe controller register blocks.
"csr_axi_slave": Bridge config registers
"config_axi_slave": PCIe controller registers
- interrupts: A list of interrupt outputs of the controller. Must contain an
entry for each entry in the interrupt-names property.
- interrupt-names: It could include the following entries:
"intr": The interrupt that is asserted for controller interrupts
"aer": Asserted for aer interrupt when chip support the aer interrupt with
none MSI/MSI-X/INTx mode,but there is interrupt line for aer.
"pme": Asserted for pme interrupt when chip support the pme interrupt with
none MSI/MSI-X/INTx mode,but there is interrupt line for pme.
- dma-coherent: Indicates that the hardware IP block can ensure the coherency
of the data transferred from/to the IP block. This can avoid the software
cache flush/invalid actions, and improve the performance significantly.
- msi-parent : See the generic MSI binding described in
Documentation/devicetree/bindings/interrupt-controller/msi.txt.
Example:
pcie@3400000 {
compatible = "fsl,lx2160a-pcie";
reg = <0x00 0x03400000 0x0 0x00100000 /* controller registers */
0x80 0x00000000 0x0 0x00001000>; /* configuration space */
reg-names = "csr_axi_slave", "config_axi_slave";
interrupts = <GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>, /* AER interrupt */
<GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>, /* PME interrupt */
<GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>; /* controller interrupt */
interrupt-names = "aer", "pme", "intr";
#address-cells = <3>;
#size-cells = <2>;
device_type = "pci";
apio-wins = <8>;
ppio-wins = <8>;
dma-coherent;
bus-range = <0x0 0xff>;
msi-parent = <&its>;
ranges = <0x82000000 0x0 0x40000000 0x80 0x40000000 0x0 0x40000000>;
#interrupt-cells = <1>;
interrupt-map-mask = <0 0 0 7>;
interrupt-map = <0000 0 0 1 &gic 0 0 GIC_SPI 109 IRQ_TYPE_LEVEL_HIGH>,
<0000 0 0 2 &gic 0 0 GIC_SPI 110 IRQ_TYPE_LEVEL_HIGH>,
<0000 0 0 3 &gic 0 0 GIC_SPI 111 IRQ_TYPE_LEVEL_HIGH>,
<0000 0 0 4 &gic 0 0 GIC_SPI 112 IRQ_TYPE_LEVEL_HIGH>;
};