7811 lines
212 KiB
C
7811 lines
212 KiB
C
// SPDX-License-Identifier: ISC
|
|
/*
|
|
* Copyright (c) 2010 Broadcom Corporation
|
|
*/
|
|
|
|
/* Toplevel file. Relies on dhd_linux.c to send commands to the dongle. */
|
|
|
|
#include <linux/kernel.h>
|
|
#include <linux/etherdevice.h>
|
|
#include <linux/module.h>
|
|
#include <linux/vmalloc.h>
|
|
#include <net/cfg80211.h>
|
|
#include <net/netlink.h>
|
|
#include <uapi/linux/if_arp.h>
|
|
|
|
#include <brcmu_utils.h>
|
|
#include <defs.h>
|
|
#include <brcmu_wifi.h>
|
|
#include <brcm_hw_ids.h>
|
|
#include "core.h"
|
|
#include "debug.h"
|
|
#include "tracepoint.h"
|
|
#include "fwil_types.h"
|
|
#include "p2p.h"
|
|
#include "btcoex.h"
|
|
#include "pno.h"
|
|
#include "fwsignal.h"
|
|
#include "cfg80211.h"
|
|
#include "feature.h"
|
|
#include "fwil.h"
|
|
#include "proto.h"
|
|
#include "vendor.h"
|
|
#include "bus.h"
|
|
#include "common.h"
|
|
|
|
#define BRCMF_SCAN_IE_LEN_MAX 2048
|
|
|
|
#define WPA_OUI "\x00\x50\xF2" /* WPA OUI */
|
|
#define WPA_OUI_TYPE 1
|
|
#define RSN_OUI "\x00\x0F\xAC" /* RSN OUI */
|
|
#define WME_OUI_TYPE 2
|
|
#define WPS_OUI_TYPE 4
|
|
|
|
#define VS_IE_FIXED_HDR_LEN 6
|
|
#define WPA_IE_VERSION_LEN 2
|
|
#define WPA_IE_MIN_OUI_LEN 4
|
|
#define WPA_IE_SUITE_COUNT_LEN 2
|
|
|
|
#define WPA_CIPHER_NONE 0 /* None */
|
|
#define WPA_CIPHER_WEP_40 1 /* WEP (40-bit) */
|
|
#define WPA_CIPHER_TKIP 2 /* TKIP: default for WPA */
|
|
#define WPA_CIPHER_AES_CCM 4 /* AES (CCM) */
|
|
#define WPA_CIPHER_WEP_104 5 /* WEP (104-bit) */
|
|
|
|
#define RSN_AKM_NONE 0 /* None (IBSS) */
|
|
#define RSN_AKM_UNSPECIFIED 1 /* Over 802.1x */
|
|
#define RSN_AKM_PSK 2 /* Pre-shared Key */
|
|
#define RSN_AKM_SHA256_1X 5 /* SHA256, 802.1X */
|
|
#define RSN_AKM_SHA256_PSK 6 /* SHA256, Pre-shared Key */
|
|
#define RSN_AKM_SAE 8 /* SAE */
|
|
#define RSN_CAP_LEN 2 /* Length of RSN capabilities */
|
|
#define RSN_CAP_PTK_REPLAY_CNTR_MASK (BIT(2) | BIT(3))
|
|
#define RSN_CAP_MFPR_MASK BIT(6)
|
|
#define RSN_CAP_MFPC_MASK BIT(7)
|
|
#define RSN_PMKID_COUNT_LEN 2
|
|
|
|
#define VNDR_IE_CMD_LEN 4 /* length of the set command
|
|
* string :"add", "del" (+ NUL)
|
|
*/
|
|
#define VNDR_IE_COUNT_OFFSET 4
|
|
#define VNDR_IE_PKTFLAG_OFFSET 8
|
|
#define VNDR_IE_VSIE_OFFSET 12
|
|
#define VNDR_IE_HDR_SIZE 12
|
|
#define VNDR_IE_PARSE_LIMIT 5
|
|
|
|
#define DOT11_MGMT_HDR_LEN 24 /* d11 management header len */
|
|
#define DOT11_BCN_PRB_FIXED_LEN 12 /* beacon/probe fixed length */
|
|
|
|
#define BRCMF_SCAN_JOIN_ACTIVE_DWELL_TIME_MS 320
|
|
#define BRCMF_SCAN_JOIN_PASSIVE_DWELL_TIME_MS 400
|
|
#define BRCMF_SCAN_JOIN_PROBE_INTERVAL_MS 20
|
|
|
|
#define BRCMF_SCAN_CHANNEL_TIME 40
|
|
#define BRCMF_SCAN_UNASSOC_TIME 40
|
|
#define BRCMF_SCAN_PASSIVE_TIME 120
|
|
|
|
#define BRCMF_ND_INFO_TIMEOUT msecs_to_jiffies(2000)
|
|
|
|
#define BRCMF_PS_MAX_TIMEOUT_MS 2000
|
|
|
|
#define BRCMF_ASSOC_PARAMS_FIXED_SIZE \
|
|
(sizeof(struct brcmf_assoc_params_le) - sizeof(u16))
|
|
|
|
#define BRCMF_MAX_CHANSPEC_LIST \
|
|
(BRCMF_DCMD_MEDLEN / sizeof(__le32) - 1)
|
|
|
|
static bool check_vif_up(struct brcmf_cfg80211_vif *vif)
|
|
{
|
|
if (!test_bit(BRCMF_VIF_STATUS_READY, &vif->sme_state)) {
|
|
brcmf_dbg(INFO, "device is not ready : status (%lu)\n",
|
|
vif->sme_state);
|
|
return false;
|
|
}
|
|
return true;
|
|
}
|
|
|
|
#define RATE_TO_BASE100KBPS(rate) (((rate) * 10) / 2)
|
|
#define RATETAB_ENT(_rateid, _flags) \
|
|
{ \
|
|
.bitrate = RATE_TO_BASE100KBPS(_rateid), \
|
|
.hw_value = (_rateid), \
|
|
.flags = (_flags), \
|
|
}
|
|
|
|
static struct ieee80211_rate __wl_rates[] = {
|
|
RATETAB_ENT(BRCM_RATE_1M, 0),
|
|
RATETAB_ENT(BRCM_RATE_2M, IEEE80211_RATE_SHORT_PREAMBLE),
|
|
RATETAB_ENT(BRCM_RATE_5M5, IEEE80211_RATE_SHORT_PREAMBLE),
|
|
RATETAB_ENT(BRCM_RATE_11M, IEEE80211_RATE_SHORT_PREAMBLE),
|
|
RATETAB_ENT(BRCM_RATE_6M, 0),
|
|
RATETAB_ENT(BRCM_RATE_9M, 0),
|
|
RATETAB_ENT(BRCM_RATE_12M, 0),
|
|
RATETAB_ENT(BRCM_RATE_18M, 0),
|
|
RATETAB_ENT(BRCM_RATE_24M, 0),
|
|
RATETAB_ENT(BRCM_RATE_36M, 0),
|
|
RATETAB_ENT(BRCM_RATE_48M, 0),
|
|
RATETAB_ENT(BRCM_RATE_54M, 0),
|
|
};
|
|
|
|
#define wl_g_rates (__wl_rates + 0)
|
|
#define wl_g_rates_size ARRAY_SIZE(__wl_rates)
|
|
#define wl_a_rates (__wl_rates + 4)
|
|
#define wl_a_rates_size (wl_g_rates_size - 4)
|
|
|
|
#define CHAN2G(_channel, _freq) { \
|
|
.band = NL80211_BAND_2GHZ, \
|
|
.center_freq = (_freq), \
|
|
.hw_value = (_channel), \
|
|
.max_antenna_gain = 0, \
|
|
.max_power = 30, \
|
|
}
|
|
|
|
#define CHAN5G(_channel) { \
|
|
.band = NL80211_BAND_5GHZ, \
|
|
.center_freq = 5000 + (5 * (_channel)), \
|
|
.hw_value = (_channel), \
|
|
.max_antenna_gain = 0, \
|
|
.max_power = 30, \
|
|
}
|
|
|
|
static struct ieee80211_channel __wl_2ghz_channels[] = {
|
|
CHAN2G(1, 2412), CHAN2G(2, 2417), CHAN2G(3, 2422), CHAN2G(4, 2427),
|
|
CHAN2G(5, 2432), CHAN2G(6, 2437), CHAN2G(7, 2442), CHAN2G(8, 2447),
|
|
CHAN2G(9, 2452), CHAN2G(10, 2457), CHAN2G(11, 2462), CHAN2G(12, 2467),
|
|
CHAN2G(13, 2472), CHAN2G(14, 2484)
|
|
};
|
|
|
|
static struct ieee80211_channel __wl_5ghz_channels[] = {
|
|
CHAN5G(34), CHAN5G(36), CHAN5G(38), CHAN5G(40), CHAN5G(42),
|
|
CHAN5G(44), CHAN5G(46), CHAN5G(48), CHAN5G(52), CHAN5G(56),
|
|
CHAN5G(60), CHAN5G(64), CHAN5G(100), CHAN5G(104), CHAN5G(108),
|
|
CHAN5G(112), CHAN5G(116), CHAN5G(120), CHAN5G(124), CHAN5G(128),
|
|
CHAN5G(132), CHAN5G(136), CHAN5G(140), CHAN5G(144), CHAN5G(149),
|
|
CHAN5G(153), CHAN5G(157), CHAN5G(161), CHAN5G(165)
|
|
};
|
|
|
|
/* Band templates duplicated per wiphy. The channel info
|
|
* above is added to the band during setup.
|
|
*/
|
|
static const struct ieee80211_supported_band __wl_band_2ghz = {
|
|
.band = NL80211_BAND_2GHZ,
|
|
.bitrates = wl_g_rates,
|
|
.n_bitrates = wl_g_rates_size,
|
|
};
|
|
|
|
static const struct ieee80211_supported_band __wl_band_5ghz = {
|
|
.band = NL80211_BAND_5GHZ,
|
|
.bitrates = wl_a_rates,
|
|
.n_bitrates = wl_a_rates_size,
|
|
};
|
|
|
|
/* This is to override regulatory domains defined in cfg80211 module (reg.c)
|
|
* By default world regulatory domain defined in reg.c puts the flags
|
|
* NL80211_RRF_NO_IR for 5GHz channels (for * 36..48 and 149..165).
|
|
* With respect to these flags, wpa_supplicant doesn't * start p2p
|
|
* operations on 5GHz channels. All the changes in world regulatory
|
|
* domain are to be done here.
|
|
*/
|
|
static const struct ieee80211_regdomain brcmf_regdom = {
|
|
.n_reg_rules = 4,
|
|
.alpha2 = "99",
|
|
.reg_rules = {
|
|
/* IEEE 802.11b/g, channels 1..11 */
|
|
REG_RULE(2412-10, 2472+10, 40, 6, 20, 0),
|
|
/* If any */
|
|
/* IEEE 802.11 channel 14 - Only JP enables
|
|
* this and for 802.11b only
|
|
*/
|
|
REG_RULE(2484-10, 2484+10, 20, 6, 20, 0),
|
|
/* IEEE 802.11a, channel 36..64 */
|
|
REG_RULE(5150-10, 5350+10, 160, 6, 20, 0),
|
|
/* IEEE 802.11a, channel 100..165 */
|
|
REG_RULE(5470-10, 5850+10, 160, 6, 20, 0), }
|
|
};
|
|
|
|
/* Note: brcmf_cipher_suites is an array of int defining which cipher suites
|
|
* are supported. A pointer to this array and the number of entries is passed
|
|
* on to upper layers. AES_CMAC defines whether or not the driver supports MFP.
|
|
* So the cipher suite AES_CMAC has to be the last one in the array, and when
|
|
* device does not support MFP then the number of suites will be decreased by 1
|
|
*/
|
|
static const u32 brcmf_cipher_suites[] = {
|
|
WLAN_CIPHER_SUITE_WEP40,
|
|
WLAN_CIPHER_SUITE_WEP104,
|
|
WLAN_CIPHER_SUITE_TKIP,
|
|
WLAN_CIPHER_SUITE_CCMP,
|
|
/* Keep as last entry: */
|
|
WLAN_CIPHER_SUITE_AES_CMAC
|
|
};
|
|
|
|
/* Vendor specific ie. id = 221, oui and type defines exact ie */
|
|
struct brcmf_vs_tlv {
|
|
u8 id;
|
|
u8 len;
|
|
u8 oui[3];
|
|
u8 oui_type;
|
|
};
|
|
|
|
struct parsed_vndr_ie_info {
|
|
u8 *ie_ptr;
|
|
u32 ie_len; /* total length including id & length field */
|
|
struct brcmf_vs_tlv vndrie;
|
|
};
|
|
|
|
struct parsed_vndr_ies {
|
|
u32 count;
|
|
struct parsed_vndr_ie_info ie_info[VNDR_IE_PARSE_LIMIT];
|
|
};
|
|
|
|
static u8 nl80211_band_to_fwil(enum nl80211_band band)
|
|
{
|
|
switch (band) {
|
|
case NL80211_BAND_2GHZ:
|
|
return WLC_BAND_2G;
|
|
case NL80211_BAND_5GHZ:
|
|
return WLC_BAND_5G;
|
|
default:
|
|
WARN_ON(1);
|
|
break;
|
|
}
|
|
return 0;
|
|
}
|
|
|
|
static u16 chandef_to_chanspec(struct brcmu_d11inf *d11inf,
|
|
struct cfg80211_chan_def *ch)
|
|
{
|
|
struct brcmu_chan ch_inf;
|
|
s32 primary_offset;
|
|
|
|
brcmf_dbg(TRACE, "chandef: control %d center %d width %d\n",
|
|
ch->chan->center_freq, ch->center_freq1, ch->width);
|
|
ch_inf.chnum = ieee80211_frequency_to_channel(ch->center_freq1);
|
|
primary_offset = ch->chan->center_freq - ch->center_freq1;
|
|
switch (ch->width) {
|
|
case NL80211_CHAN_WIDTH_20:
|
|
case NL80211_CHAN_WIDTH_20_NOHT:
|
|
ch_inf.bw = BRCMU_CHAN_BW_20;
|
|
WARN_ON(primary_offset != 0);
|
|
break;
|
|
case NL80211_CHAN_WIDTH_40:
|
|
ch_inf.bw = BRCMU_CHAN_BW_40;
|
|
if (primary_offset > 0)
|
|
ch_inf.sb = BRCMU_CHAN_SB_U;
|
|
else
|
|
ch_inf.sb = BRCMU_CHAN_SB_L;
|
|
break;
|
|
case NL80211_CHAN_WIDTH_80:
|
|
ch_inf.bw = BRCMU_CHAN_BW_80;
|
|
if (primary_offset == -30)
|
|
ch_inf.sb = BRCMU_CHAN_SB_LL;
|
|
else if (primary_offset == -10)
|
|
ch_inf.sb = BRCMU_CHAN_SB_LU;
|
|
else if (primary_offset == 10)
|
|
ch_inf.sb = BRCMU_CHAN_SB_UL;
|
|
else
|
|
ch_inf.sb = BRCMU_CHAN_SB_UU;
|
|
break;
|
|
case NL80211_CHAN_WIDTH_160:
|
|
ch_inf.bw = BRCMU_CHAN_BW_160;
|
|
if (primary_offset == -70)
|
|
ch_inf.sb = BRCMU_CHAN_SB_LLL;
|
|
else if (primary_offset == -50)
|
|
ch_inf.sb = BRCMU_CHAN_SB_LLU;
|
|
else if (primary_offset == -30)
|
|
ch_inf.sb = BRCMU_CHAN_SB_LUL;
|
|
else if (primary_offset == -10)
|
|
ch_inf.sb = BRCMU_CHAN_SB_LUU;
|
|
else if (primary_offset == 10)
|
|
ch_inf.sb = BRCMU_CHAN_SB_ULL;
|
|
else if (primary_offset == 30)
|
|
ch_inf.sb = BRCMU_CHAN_SB_ULU;
|
|
else if (primary_offset == 50)
|
|
ch_inf.sb = BRCMU_CHAN_SB_UUL;
|
|
else
|
|
ch_inf.sb = BRCMU_CHAN_SB_UUU;
|
|
break;
|
|
case NL80211_CHAN_WIDTH_80P80:
|
|
case NL80211_CHAN_WIDTH_5:
|
|
case NL80211_CHAN_WIDTH_10:
|
|
default:
|
|
WARN_ON_ONCE(1);
|
|
}
|
|
switch (ch->chan->band) {
|
|
case NL80211_BAND_2GHZ:
|
|
ch_inf.band = BRCMU_CHAN_BAND_2G;
|
|
break;
|
|
case NL80211_BAND_5GHZ:
|
|
ch_inf.band = BRCMU_CHAN_BAND_5G;
|
|
break;
|
|
case NL80211_BAND_60GHZ:
|
|
default:
|
|
WARN_ON_ONCE(1);
|
|
}
|
|
d11inf->encchspec(&ch_inf);
|
|
|
|
brcmf_dbg(TRACE, "chanspec: 0x%x\n", ch_inf.chspec);
|
|
return ch_inf.chspec;
|
|
}
|
|
|
|
u16 channel_to_chanspec(struct brcmu_d11inf *d11inf,
|
|
struct ieee80211_channel *ch)
|
|
{
|
|
struct brcmu_chan ch_inf;
|
|
|
|
ch_inf.chnum = ieee80211_frequency_to_channel(ch->center_freq);
|
|
ch_inf.bw = BRCMU_CHAN_BW_20;
|
|
d11inf->encchspec(&ch_inf);
|
|
|
|
return ch_inf.chspec;
|
|
}
|
|
|
|
/* Traverse a string of 1-byte tag/1-byte length/variable-length value
|
|
* triples, returning a pointer to the substring whose first element
|
|
* matches tag
|
|
*/
|
|
static const struct brcmf_tlv *
|
|
brcmf_parse_tlvs(const void *buf, int buflen, uint key)
|
|
{
|
|
const struct brcmf_tlv *elt = buf;
|
|
int totlen = buflen;
|
|
|
|
/* find tagged parameter */
|
|
while (totlen >= TLV_HDR_LEN) {
|
|
int len = elt->len;
|
|
|
|
/* validate remaining totlen */
|
|
if ((elt->id == key) && (totlen >= (len + TLV_HDR_LEN)))
|
|
return elt;
|
|
|
|
elt = (struct brcmf_tlv *)((u8 *)elt + (len + TLV_HDR_LEN));
|
|
totlen -= (len + TLV_HDR_LEN);
|
|
}
|
|
|
|
return NULL;
|
|
}
|
|
|
|
/* Is any of the tlvs the expected entry? If
|
|
* not update the tlvs buffer pointer/length.
|
|
*/
|
|
static bool
|
|
brcmf_tlv_has_ie(const u8 *ie, const u8 **tlvs, u32 *tlvs_len,
|
|
const u8 *oui, u32 oui_len, u8 type)
|
|
{
|
|
/* If the contents match the OUI and the type */
|
|
if (ie[TLV_LEN_OFF] >= oui_len + 1 &&
|
|
!memcmp(&ie[TLV_BODY_OFF], oui, oui_len) &&
|
|
type == ie[TLV_BODY_OFF + oui_len]) {
|
|
return true;
|
|
}
|
|
|
|
if (tlvs == NULL)
|
|
return false;
|
|
/* point to the next ie */
|
|
ie += ie[TLV_LEN_OFF] + TLV_HDR_LEN;
|
|
/* calculate the length of the rest of the buffer */
|
|
*tlvs_len -= (int)(ie - *tlvs);
|
|
/* update the pointer to the start of the buffer */
|
|
*tlvs = ie;
|
|
|
|
return false;
|
|
}
|
|
|
|
static struct brcmf_vs_tlv *
|
|
brcmf_find_wpaie(const u8 *parse, u32 len)
|
|
{
|
|
const struct brcmf_tlv *ie;
|
|
|
|
while ((ie = brcmf_parse_tlvs(parse, len, WLAN_EID_VENDOR_SPECIFIC))) {
|
|
if (brcmf_tlv_has_ie((const u8 *)ie, &parse, &len,
|
|
WPA_OUI, TLV_OUI_LEN, WPA_OUI_TYPE))
|
|
return (struct brcmf_vs_tlv *)ie;
|
|
}
|
|
return NULL;
|
|
}
|
|
|
|
static struct brcmf_vs_tlv *
|
|
brcmf_find_wpsie(const u8 *parse, u32 len)
|
|
{
|
|
const struct brcmf_tlv *ie;
|
|
|
|
while ((ie = brcmf_parse_tlvs(parse, len, WLAN_EID_VENDOR_SPECIFIC))) {
|
|
if (brcmf_tlv_has_ie((u8 *)ie, &parse, &len,
|
|
WPA_OUI, TLV_OUI_LEN, WPS_OUI_TYPE))
|
|
return (struct brcmf_vs_tlv *)ie;
|
|
}
|
|
return NULL;
|
|
}
|
|
|
|
static int brcmf_vif_change_validate(struct brcmf_cfg80211_info *cfg,
|
|
struct brcmf_cfg80211_vif *vif,
|
|
enum nl80211_iftype new_type)
|
|
{
|
|
struct brcmf_cfg80211_vif *pos;
|
|
bool check_combos = false;
|
|
int ret = 0;
|
|
struct iface_combination_params params = {
|
|
.num_different_channels = 1,
|
|
};
|
|
|
|
list_for_each_entry(pos, &cfg->vif_list, list)
|
|
if (pos == vif) {
|
|
params.iftype_num[new_type]++;
|
|
} else {
|
|
/* concurrent interfaces so need check combinations */
|
|
check_combos = true;
|
|
params.iftype_num[pos->wdev.iftype]++;
|
|
}
|
|
|
|
if (check_combos)
|
|
ret = cfg80211_check_combinations(cfg->wiphy, ¶ms);
|
|
|
|
return ret;
|
|
}
|
|
|
|
static int brcmf_vif_add_validate(struct brcmf_cfg80211_info *cfg,
|
|
enum nl80211_iftype new_type)
|
|
{
|
|
struct brcmf_cfg80211_vif *pos;
|
|
struct iface_combination_params params = {
|
|
.num_different_channels = 1,
|
|
};
|
|
|
|
list_for_each_entry(pos, &cfg->vif_list, list)
|
|
params.iftype_num[pos->wdev.iftype]++;
|
|
|
|
params.iftype_num[new_type]++;
|
|
return cfg80211_check_combinations(cfg->wiphy, ¶ms);
|
|
}
|
|
|
|
static void convert_key_from_CPU(struct brcmf_wsec_key *key,
|
|
struct brcmf_wsec_key_le *key_le)
|
|
{
|
|
key_le->index = cpu_to_le32(key->index);
|
|
key_le->len = cpu_to_le32(key->len);
|
|
key_le->algo = cpu_to_le32(key->algo);
|
|
key_le->flags = cpu_to_le32(key->flags);
|
|
key_le->rxiv.hi = cpu_to_le32(key->rxiv.hi);
|
|
key_le->rxiv.lo = cpu_to_le16(key->rxiv.lo);
|
|
key_le->iv_initialized = cpu_to_le32(key->iv_initialized);
|
|
memcpy(key_le->data, key->data, sizeof(key->data));
|
|
memcpy(key_le->ea, key->ea, sizeof(key->ea));
|
|
}
|
|
|
|
static int
|
|
send_key_to_dongle(struct brcmf_if *ifp, struct brcmf_wsec_key *key)
|
|
{
|
|
struct brcmf_pub *drvr = ifp->drvr;
|
|
int err;
|
|
struct brcmf_wsec_key_le key_le;
|
|
|
|
convert_key_from_CPU(key, &key_le);
|
|
|
|
brcmf_netdev_wait_pend8021x(ifp);
|
|
|
|
err = brcmf_fil_bsscfg_data_set(ifp, "wsec_key", &key_le,
|
|
sizeof(key_le));
|
|
|
|
if (err)
|
|
bphy_err(drvr, "wsec_key error (%d)\n", err);
|
|
return err;
|
|
}
|
|
|
|
static void
|
|
brcmf_cfg80211_update_proto_addr_mode(struct wireless_dev *wdev)
|
|
{
|
|
struct brcmf_cfg80211_vif *vif;
|
|
struct brcmf_if *ifp;
|
|
|
|
vif = container_of(wdev, struct brcmf_cfg80211_vif, wdev);
|
|
ifp = vif->ifp;
|
|
|
|
if ((wdev->iftype == NL80211_IFTYPE_ADHOC) ||
|
|
(wdev->iftype == NL80211_IFTYPE_AP) ||
|
|
(wdev->iftype == NL80211_IFTYPE_P2P_GO))
|
|
brcmf_proto_configure_addr_mode(ifp->drvr, ifp->ifidx,
|
|
ADDR_DIRECT);
|
|
else
|
|
brcmf_proto_configure_addr_mode(ifp->drvr, ifp->ifidx,
|
|
ADDR_INDIRECT);
|
|
}
|
|
|
|
static int brcmf_get_first_free_bsscfgidx(struct brcmf_pub *drvr)
|
|
{
|
|
int bsscfgidx;
|
|
|
|
for (bsscfgidx = 0; bsscfgidx < BRCMF_MAX_IFS; bsscfgidx++) {
|
|
/* bsscfgidx 1 is reserved for legacy P2P */
|
|
if (bsscfgidx == 1)
|
|
continue;
|
|
if (!drvr->iflist[bsscfgidx])
|
|
return bsscfgidx;
|
|
}
|
|
|
|
return -ENOMEM;
|
|
}
|
|
|
|
static int brcmf_cfg80211_request_ap_if(struct brcmf_if *ifp)
|
|
{
|
|
struct brcmf_pub *drvr = ifp->drvr;
|
|
struct brcmf_mbss_ssid_le mbss_ssid_le;
|
|
int bsscfgidx;
|
|
int err;
|
|
|
|
memset(&mbss_ssid_le, 0, sizeof(mbss_ssid_le));
|
|
bsscfgidx = brcmf_get_first_free_bsscfgidx(ifp->drvr);
|
|
if (bsscfgidx < 0)
|
|
return bsscfgidx;
|
|
|
|
mbss_ssid_le.bsscfgidx = cpu_to_le32(bsscfgidx);
|
|
mbss_ssid_le.SSID_len = cpu_to_le32(5);
|
|
sprintf(mbss_ssid_le.SSID, "ssid%d" , bsscfgidx);
|
|
|
|
err = brcmf_fil_bsscfg_data_set(ifp, "bsscfg:ssid", &mbss_ssid_le,
|
|
sizeof(mbss_ssid_le));
|
|
if (err < 0)
|
|
bphy_err(drvr, "setting ssid failed %d\n", err);
|
|
|
|
return err;
|
|
}
|
|
|
|
/**
|
|
* brcmf_ap_add_vif() - create a new AP virtual interface for multiple BSS
|
|
*
|
|
* @wiphy: wiphy device of new interface.
|
|
* @name: name of the new interface.
|
|
* @params: contains mac address for AP device.
|
|
*/
|
|
static
|
|
struct wireless_dev *brcmf_ap_add_vif(struct wiphy *wiphy, const char *name,
|
|
struct vif_params *params)
|
|
{
|
|
struct brcmf_cfg80211_info *cfg = wiphy_to_cfg(wiphy);
|
|
struct brcmf_if *ifp = netdev_priv(cfg_to_ndev(cfg));
|
|
struct brcmf_pub *drvr = cfg->pub;
|
|
struct brcmf_cfg80211_vif *vif;
|
|
int err;
|
|
|
|
if (brcmf_cfg80211_vif_event_armed(cfg))
|
|
return ERR_PTR(-EBUSY);
|
|
|
|
brcmf_dbg(INFO, "Adding vif \"%s\"\n", name);
|
|
|
|
vif = brcmf_alloc_vif(cfg, NL80211_IFTYPE_AP);
|
|
if (IS_ERR(vif))
|
|
return (struct wireless_dev *)vif;
|
|
|
|
brcmf_cfg80211_arm_vif_event(cfg, vif);
|
|
|
|
err = brcmf_cfg80211_request_ap_if(ifp);
|
|
if (err) {
|
|
brcmf_cfg80211_arm_vif_event(cfg, NULL);
|
|
goto fail;
|
|
}
|
|
|
|
/* wait for firmware event */
|
|
err = brcmf_cfg80211_wait_vif_event(cfg, BRCMF_E_IF_ADD,
|
|
BRCMF_VIF_EVENT_TIMEOUT);
|
|
brcmf_cfg80211_arm_vif_event(cfg, NULL);
|
|
if (!err) {
|
|
bphy_err(drvr, "timeout occurred\n");
|
|
err = -EIO;
|
|
goto fail;
|
|
}
|
|
|
|
/* interface created in firmware */
|
|
ifp = vif->ifp;
|
|
if (!ifp) {
|
|
bphy_err(drvr, "no if pointer provided\n");
|
|
err = -ENOENT;
|
|
goto fail;
|
|
}
|
|
|
|
strncpy(ifp->ndev->name, name, sizeof(ifp->ndev->name) - 1);
|
|
err = brcmf_net_attach(ifp, true);
|
|
if (err) {
|
|
bphy_err(drvr, "Registering netdevice failed\n");
|
|
free_netdev(ifp->ndev);
|
|
goto fail;
|
|
}
|
|
|
|
return &ifp->vif->wdev;
|
|
|
|
fail:
|
|
brcmf_free_vif(vif);
|
|
return ERR_PTR(err);
|
|
}
|
|
|
|
static bool brcmf_is_apmode(struct brcmf_cfg80211_vif *vif)
|
|
{
|
|
enum nl80211_iftype iftype;
|
|
|
|
iftype = vif->wdev.iftype;
|
|
return iftype == NL80211_IFTYPE_AP || iftype == NL80211_IFTYPE_P2P_GO;
|
|
}
|
|
|
|
static bool brcmf_is_ibssmode(struct brcmf_cfg80211_vif *vif)
|
|
{
|
|
return vif->wdev.iftype == NL80211_IFTYPE_ADHOC;
|
|
}
|
|
|
|
/**
|
|
* brcmf_mon_add_vif() - create monitor mode virtual interface
|
|
*
|
|
* @wiphy: wiphy device of new interface.
|
|
* @name: name of the new interface.
|
|
*/
|
|
static struct wireless_dev *brcmf_mon_add_vif(struct wiphy *wiphy,
|
|
const char *name)
|
|
{
|
|
struct brcmf_cfg80211_info *cfg = wiphy_to_cfg(wiphy);
|
|
struct brcmf_cfg80211_vif *vif;
|
|
struct net_device *ndev;
|
|
struct brcmf_if *ifp;
|
|
int err;
|
|
|
|
if (cfg->pub->mon_if) {
|
|
err = -EEXIST;
|
|
goto err_out;
|
|
}
|
|
|
|
vif = brcmf_alloc_vif(cfg, NL80211_IFTYPE_MONITOR);
|
|
if (IS_ERR(vif)) {
|
|
err = PTR_ERR(vif);
|
|
goto err_out;
|
|
}
|
|
|
|
ndev = alloc_netdev(sizeof(*ifp), name, NET_NAME_UNKNOWN, ether_setup);
|
|
if (!ndev) {
|
|
err = -ENOMEM;
|
|
goto err_free_vif;
|
|
}
|
|
ndev->type = ARPHRD_IEEE80211_RADIOTAP;
|
|
ndev->ieee80211_ptr = &vif->wdev;
|
|
ndev->needs_free_netdev = true;
|
|
ndev->priv_destructor = brcmf_cfg80211_free_netdev;
|
|
SET_NETDEV_DEV(ndev, wiphy_dev(cfg->wiphy));
|
|
|
|
ifp = netdev_priv(ndev);
|
|
ifp->vif = vif;
|
|
ifp->ndev = ndev;
|
|
ifp->drvr = cfg->pub;
|
|
|
|
vif->ifp = ifp;
|
|
vif->wdev.netdev = ndev;
|
|
|
|
err = brcmf_net_mon_attach(ifp);
|
|
if (err) {
|
|
brcmf_err("Failed to attach %s device\n", ndev->name);
|
|
free_netdev(ndev);
|
|
goto err_free_vif;
|
|
}
|
|
|
|
cfg->pub->mon_if = ifp;
|
|
|
|
return &vif->wdev;
|
|
|
|
err_free_vif:
|
|
brcmf_free_vif(vif);
|
|
err_out:
|
|
return ERR_PTR(err);
|
|
}
|
|
|
|
static int brcmf_mon_del_vif(struct wiphy *wiphy, struct wireless_dev *wdev)
|
|
{
|
|
struct brcmf_cfg80211_info *cfg = wiphy_to_cfg(wiphy);
|
|
struct net_device *ndev = wdev->netdev;
|
|
|
|
ndev->netdev_ops->ndo_stop(ndev);
|
|
|
|
brcmf_net_detach(ndev, true);
|
|
|
|
cfg->pub->mon_if = NULL;
|
|
|
|
return 0;
|
|
}
|
|
|
|
static struct wireless_dev *brcmf_cfg80211_add_iface(struct wiphy *wiphy,
|
|
const char *name,
|
|
unsigned char name_assign_type,
|
|
enum nl80211_iftype type,
|
|
struct vif_params *params)
|
|
{
|
|
struct brcmf_cfg80211_info *cfg = wiphy_to_cfg(wiphy);
|
|
struct brcmf_pub *drvr = cfg->pub;
|
|
struct wireless_dev *wdev;
|
|
int err;
|
|
|
|
brcmf_dbg(TRACE, "enter: %s type %d\n", name, type);
|
|
err = brcmf_vif_add_validate(wiphy_to_cfg(wiphy), type);
|
|
if (err) {
|
|
bphy_err(drvr, "iface validation failed: err=%d\n", err);
|
|
return ERR_PTR(err);
|
|
}
|
|
switch (type) {
|
|
case NL80211_IFTYPE_ADHOC:
|
|
case NL80211_IFTYPE_STATION:
|
|
case NL80211_IFTYPE_AP_VLAN:
|
|
case NL80211_IFTYPE_WDS:
|
|
case NL80211_IFTYPE_MESH_POINT:
|
|
return ERR_PTR(-EOPNOTSUPP);
|
|
case NL80211_IFTYPE_MONITOR:
|
|
return brcmf_mon_add_vif(wiphy, name);
|
|
case NL80211_IFTYPE_AP:
|
|
wdev = brcmf_ap_add_vif(wiphy, name, params);
|
|
break;
|
|
case NL80211_IFTYPE_P2P_CLIENT:
|
|
case NL80211_IFTYPE_P2P_GO:
|
|
case NL80211_IFTYPE_P2P_DEVICE:
|
|
wdev = brcmf_p2p_add_vif(wiphy, name, name_assign_type, type, params);
|
|
break;
|
|
case NL80211_IFTYPE_UNSPECIFIED:
|
|
default:
|
|
return ERR_PTR(-EINVAL);
|
|
}
|
|
|
|
if (IS_ERR(wdev))
|
|
bphy_err(drvr, "add iface %s type %d failed: err=%d\n", name,
|
|
type, (int)PTR_ERR(wdev));
|
|
else
|
|
brcmf_cfg80211_update_proto_addr_mode(wdev);
|
|
|
|
return wdev;
|
|
}
|
|
|
|
static void brcmf_scan_config_mpc(struct brcmf_if *ifp, int mpc)
|
|
{
|
|
if (brcmf_feat_is_quirk_enabled(ifp, BRCMF_FEAT_QUIRK_NEED_MPC))
|
|
brcmf_set_mpc(ifp, mpc);
|
|
}
|
|
|
|
void brcmf_set_mpc(struct brcmf_if *ifp, int mpc)
|
|
{
|
|
struct brcmf_pub *drvr = ifp->drvr;
|
|
s32 err = 0;
|
|
|
|
if (check_vif_up(ifp->vif)) {
|
|
err = brcmf_fil_iovar_int_set(ifp, "mpc", mpc);
|
|
if (err) {
|
|
bphy_err(drvr, "fail to set mpc\n");
|
|
return;
|
|
}
|
|
brcmf_dbg(INFO, "MPC : %d\n", mpc);
|
|
}
|
|
}
|
|
|
|
s32 brcmf_notify_escan_complete(struct brcmf_cfg80211_info *cfg,
|
|
struct brcmf_if *ifp, bool aborted,
|
|
bool fw_abort)
|
|
{
|
|
struct brcmf_pub *drvr = cfg->pub;
|
|
struct brcmf_scan_params_le params_le;
|
|
struct cfg80211_scan_request *scan_request;
|
|
u64 reqid;
|
|
u32 bucket;
|
|
s32 err = 0;
|
|
|
|
brcmf_dbg(SCAN, "Enter\n");
|
|
|
|
/* clear scan request, because the FW abort can cause a second call */
|
|
/* to this functon and might cause a double cfg80211_scan_done */
|
|
scan_request = cfg->scan_request;
|
|
cfg->scan_request = NULL;
|
|
|
|
if (timer_pending(&cfg->escan_timeout))
|
|
del_timer_sync(&cfg->escan_timeout);
|
|
|
|
if (fw_abort) {
|
|
/* Do a scan abort to stop the driver's scan engine */
|
|
brcmf_dbg(SCAN, "ABORT scan in firmware\n");
|
|
memset(¶ms_le, 0, sizeof(params_le));
|
|
eth_broadcast_addr(params_le.bssid);
|
|
params_le.bss_type = DOT11_BSSTYPE_ANY;
|
|
params_le.scan_type = 0;
|
|
params_le.channel_num = cpu_to_le32(1);
|
|
params_le.nprobes = cpu_to_le32(1);
|
|
params_le.active_time = cpu_to_le32(-1);
|
|
params_le.passive_time = cpu_to_le32(-1);
|
|
params_le.home_time = cpu_to_le32(-1);
|
|
/* Scan is aborted by setting channel_list[0] to -1 */
|
|
params_le.channel_list[0] = cpu_to_le16(-1);
|
|
/* E-Scan (or anyother type) can be aborted by SCAN */
|
|
err = brcmf_fil_cmd_data_set(ifp, BRCMF_C_SCAN,
|
|
¶ms_le, sizeof(params_le));
|
|
if (err)
|
|
bphy_err(drvr, "Scan abort failed\n");
|
|
}
|
|
|
|
brcmf_scan_config_mpc(ifp, 1);
|
|
|
|
/*
|
|
* e-scan can be initiated internally
|
|
* which takes precedence.
|
|
*/
|
|
if (cfg->int_escan_map) {
|
|
brcmf_dbg(SCAN, "scheduled scan completed (%x)\n",
|
|
cfg->int_escan_map);
|
|
while (cfg->int_escan_map) {
|
|
bucket = __ffs(cfg->int_escan_map);
|
|
cfg->int_escan_map &= ~BIT(bucket);
|
|
reqid = brcmf_pno_find_reqid_by_bucket(cfg->pno,
|
|
bucket);
|
|
if (!aborted) {
|
|
brcmf_dbg(SCAN, "report results: reqid=%llu\n",
|
|
reqid);
|
|
cfg80211_sched_scan_results(cfg_to_wiphy(cfg),
|
|
reqid);
|
|
}
|
|
}
|
|
} else if (scan_request) {
|
|
struct cfg80211_scan_info info = {
|
|
.aborted = aborted,
|
|
};
|
|
|
|
brcmf_dbg(SCAN, "ESCAN Completed scan: %s\n",
|
|
aborted ? "Aborted" : "Done");
|
|
cfg80211_scan_done(scan_request, &info);
|
|
}
|
|
if (!test_and_clear_bit(BRCMF_SCAN_STATUS_BUSY, &cfg->scan_status))
|
|
brcmf_dbg(SCAN, "Scan complete, probably P2P scan\n");
|
|
|
|
return err;
|
|
}
|
|
|
|
static int brcmf_cfg80211_del_ap_iface(struct wiphy *wiphy,
|
|
struct wireless_dev *wdev)
|
|
{
|
|
struct brcmf_cfg80211_info *cfg = wiphy_to_cfg(wiphy);
|
|
struct net_device *ndev = wdev->netdev;
|
|
struct brcmf_if *ifp = netdev_priv(ndev);
|
|
struct brcmf_pub *drvr = cfg->pub;
|
|
int ret;
|
|
int err;
|
|
|
|
brcmf_cfg80211_arm_vif_event(cfg, ifp->vif);
|
|
|
|
err = brcmf_fil_bsscfg_data_set(ifp, "interface_remove", NULL, 0);
|
|
if (err) {
|
|
bphy_err(drvr, "interface_remove failed %d\n", err);
|
|
goto err_unarm;
|
|
}
|
|
|
|
/* wait for firmware event */
|
|
ret = brcmf_cfg80211_wait_vif_event(cfg, BRCMF_E_IF_DEL,
|
|
BRCMF_VIF_EVENT_TIMEOUT);
|
|
if (!ret) {
|
|
bphy_err(drvr, "timeout occurred\n");
|
|
err = -EIO;
|
|
goto err_unarm;
|
|
}
|
|
|
|
brcmf_remove_interface(ifp, true);
|
|
|
|
err_unarm:
|
|
brcmf_cfg80211_arm_vif_event(cfg, NULL);
|
|
return err;
|
|
}
|
|
|
|
static
|
|
int brcmf_cfg80211_del_iface(struct wiphy *wiphy, struct wireless_dev *wdev)
|
|
{
|
|
struct brcmf_cfg80211_info *cfg = wiphy_to_cfg(wiphy);
|
|
struct net_device *ndev = wdev->netdev;
|
|
|
|
if (ndev && ndev == cfg_to_ndev(cfg))
|
|
return -ENOTSUPP;
|
|
|
|
/* vif event pending in firmware */
|
|
if (brcmf_cfg80211_vif_event_armed(cfg))
|
|
return -EBUSY;
|
|
|
|
if (ndev) {
|
|
if (test_bit(BRCMF_SCAN_STATUS_BUSY, &cfg->scan_status) &&
|
|
cfg->escan_info.ifp == netdev_priv(ndev))
|
|
brcmf_notify_escan_complete(cfg, netdev_priv(ndev),
|
|
true, true);
|
|
|
|
brcmf_fil_iovar_int_set(netdev_priv(ndev), "mpc", 1);
|
|
}
|
|
|
|
switch (wdev->iftype) {
|
|
case NL80211_IFTYPE_ADHOC:
|
|
case NL80211_IFTYPE_STATION:
|
|
case NL80211_IFTYPE_AP_VLAN:
|
|
case NL80211_IFTYPE_WDS:
|
|
case NL80211_IFTYPE_MESH_POINT:
|
|
return -EOPNOTSUPP;
|
|
case NL80211_IFTYPE_MONITOR:
|
|
return brcmf_mon_del_vif(wiphy, wdev);
|
|
case NL80211_IFTYPE_AP:
|
|
return brcmf_cfg80211_del_ap_iface(wiphy, wdev);
|
|
case NL80211_IFTYPE_P2P_CLIENT:
|
|
case NL80211_IFTYPE_P2P_GO:
|
|
case NL80211_IFTYPE_P2P_DEVICE:
|
|
return brcmf_p2p_del_vif(wiphy, wdev);
|
|
case NL80211_IFTYPE_UNSPECIFIED:
|
|
default:
|
|
return -EINVAL;
|
|
}
|
|
return -EOPNOTSUPP;
|
|
}
|
|
|
|
static s32
|
|
brcmf_cfg80211_change_iface(struct wiphy *wiphy, struct net_device *ndev,
|
|
enum nl80211_iftype type,
|
|
struct vif_params *params)
|
|
{
|
|
struct brcmf_cfg80211_info *cfg = wiphy_to_cfg(wiphy);
|
|
struct brcmf_if *ifp = netdev_priv(ndev);
|
|
struct brcmf_cfg80211_vif *vif = ifp->vif;
|
|
struct brcmf_pub *drvr = cfg->pub;
|
|
s32 infra = 0;
|
|
s32 ap = 0;
|
|
s32 err = 0;
|
|
|
|
brcmf_dbg(TRACE, "Enter, bsscfgidx=%d, type=%d\n", ifp->bsscfgidx,
|
|
type);
|
|
|
|
/* WAR: There are a number of p2p interface related problems which
|
|
* need to be handled initially (before doing the validate).
|
|
* wpa_supplicant tends to do iface changes on p2p device/client/go
|
|
* which are not always possible/allowed. However we need to return
|
|
* OK otherwise the wpa_supplicant wont start. The situation differs
|
|
* on configuration and setup (p2pon=1 module param). The first check
|
|
* is to see if the request is a change to station for p2p iface.
|
|
*/
|
|
if ((type == NL80211_IFTYPE_STATION) &&
|
|
((vif->wdev.iftype == NL80211_IFTYPE_P2P_CLIENT) ||
|
|
(vif->wdev.iftype == NL80211_IFTYPE_P2P_GO) ||
|
|
(vif->wdev.iftype == NL80211_IFTYPE_P2P_DEVICE))) {
|
|
brcmf_dbg(TRACE, "Ignoring cmd for p2p if\n");
|
|
/* Now depending on whether module param p2pon=1 was used the
|
|
* response needs to be either 0 or EOPNOTSUPP. The reason is
|
|
* that if p2pon=1 is used, but a newer supplicant is used then
|
|
* we should return an error, as this combination wont work.
|
|
* In other situations 0 is returned and supplicant will start
|
|
* normally. It will give a trace in cfg80211, but it is the
|
|
* only way to get it working. Unfortunately this will result
|
|
* in situation where we wont support new supplicant in
|
|
* combination with module param p2pon=1, but that is the way
|
|
* it is. If the user tries this then unloading of driver might
|
|
* fail/lock.
|
|
*/
|
|
if (cfg->p2p.p2pdev_dynamically)
|
|
return -EOPNOTSUPP;
|
|
else
|
|
return 0;
|
|
}
|
|
err = brcmf_vif_change_validate(wiphy_to_cfg(wiphy), vif, type);
|
|
if (err) {
|
|
bphy_err(drvr, "iface validation failed: err=%d\n", err);
|
|
return err;
|
|
}
|
|
switch (type) {
|
|
case NL80211_IFTYPE_MONITOR:
|
|
case NL80211_IFTYPE_WDS:
|
|
bphy_err(drvr, "type (%d) : currently we do not support this type\n",
|
|
type);
|
|
return -EOPNOTSUPP;
|
|
case NL80211_IFTYPE_ADHOC:
|
|
infra = 0;
|
|
break;
|
|
case NL80211_IFTYPE_STATION:
|
|
infra = 1;
|
|
break;
|
|
case NL80211_IFTYPE_AP:
|
|
case NL80211_IFTYPE_P2P_GO:
|
|
ap = 1;
|
|
break;
|
|
default:
|
|
err = -EINVAL;
|
|
goto done;
|
|
}
|
|
|
|
if (ap) {
|
|
if (type == NL80211_IFTYPE_P2P_GO) {
|
|
brcmf_dbg(INFO, "IF Type = P2P GO\n");
|
|
err = brcmf_p2p_ifchange(cfg, BRCMF_FIL_P2P_IF_GO);
|
|
}
|
|
if (!err) {
|
|
brcmf_dbg(INFO, "IF Type = AP\n");
|
|
}
|
|
} else {
|
|
err = brcmf_fil_cmd_int_set(ifp, BRCMF_C_SET_INFRA, infra);
|
|
if (err) {
|
|
bphy_err(drvr, "WLC_SET_INFRA error (%d)\n", err);
|
|
err = -EAGAIN;
|
|
goto done;
|
|
}
|
|
brcmf_dbg(INFO, "IF Type = %s\n", brcmf_is_ibssmode(vif) ?
|
|
"Adhoc" : "Infra");
|
|
}
|
|
ndev->ieee80211_ptr->iftype = type;
|
|
|
|
brcmf_cfg80211_update_proto_addr_mode(&vif->wdev);
|
|
|
|
done:
|
|
brcmf_dbg(TRACE, "Exit\n");
|
|
|
|
return err;
|
|
}
|
|
|
|
static void brcmf_escan_prep(struct brcmf_cfg80211_info *cfg,
|
|
struct brcmf_scan_params_le *params_le,
|
|
struct cfg80211_scan_request *request)
|
|
{
|
|
u32 n_ssids;
|
|
u32 n_channels;
|
|
s32 i;
|
|
s32 offset;
|
|
u16 chanspec;
|
|
char *ptr;
|
|
struct brcmf_ssid_le ssid_le;
|
|
|
|
eth_broadcast_addr(params_le->bssid);
|
|
params_le->bss_type = DOT11_BSSTYPE_ANY;
|
|
params_le->scan_type = BRCMF_SCANTYPE_ACTIVE;
|
|
params_le->channel_num = 0;
|
|
params_le->nprobes = cpu_to_le32(-1);
|
|
params_le->active_time = cpu_to_le32(-1);
|
|
params_le->passive_time = cpu_to_le32(-1);
|
|
params_le->home_time = cpu_to_le32(-1);
|
|
memset(¶ms_le->ssid_le, 0, sizeof(params_le->ssid_le));
|
|
|
|
n_ssids = request->n_ssids;
|
|
n_channels = request->n_channels;
|
|
|
|
/* Copy channel array if applicable */
|
|
brcmf_dbg(SCAN, "### List of channelspecs to scan ### %d\n",
|
|
n_channels);
|
|
if (n_channels > 0) {
|
|
for (i = 0; i < n_channels; i++) {
|
|
chanspec = channel_to_chanspec(&cfg->d11inf,
|
|
request->channels[i]);
|
|
brcmf_dbg(SCAN, "Chan : %d, Channel spec: %x\n",
|
|
request->channels[i]->hw_value, chanspec);
|
|
params_le->channel_list[i] = cpu_to_le16(chanspec);
|
|
}
|
|
} else {
|
|
brcmf_dbg(SCAN, "Scanning all channels\n");
|
|
}
|
|
/* Copy ssid array if applicable */
|
|
brcmf_dbg(SCAN, "### List of SSIDs to scan ### %d\n", n_ssids);
|
|
if (n_ssids > 0) {
|
|
offset = offsetof(struct brcmf_scan_params_le, channel_list) +
|
|
n_channels * sizeof(u16);
|
|
offset = roundup(offset, sizeof(u32));
|
|
ptr = (char *)params_le + offset;
|
|
for (i = 0; i < n_ssids; i++) {
|
|
memset(&ssid_le, 0, sizeof(ssid_le));
|
|
ssid_le.SSID_len =
|
|
cpu_to_le32(request->ssids[i].ssid_len);
|
|
memcpy(ssid_le.SSID, request->ssids[i].ssid,
|
|
request->ssids[i].ssid_len);
|
|
if (!ssid_le.SSID_len)
|
|
brcmf_dbg(SCAN, "%d: Broadcast scan\n", i);
|
|
else
|
|
brcmf_dbg(SCAN, "%d: scan for %.32s size=%d\n",
|
|
i, ssid_le.SSID, ssid_le.SSID_len);
|
|
memcpy(ptr, &ssid_le, sizeof(ssid_le));
|
|
ptr += sizeof(ssid_le);
|
|
}
|
|
} else {
|
|
brcmf_dbg(SCAN, "Performing passive scan\n");
|
|
params_le->scan_type = BRCMF_SCANTYPE_PASSIVE;
|
|
}
|
|
/* Adding mask to channel numbers */
|
|
params_le->channel_num =
|
|
cpu_to_le32((n_ssids << BRCMF_SCAN_PARAMS_NSSID_SHIFT) |
|
|
(n_channels & BRCMF_SCAN_PARAMS_COUNT_MASK));
|
|
}
|
|
|
|
static s32
|
|
brcmf_run_escan(struct brcmf_cfg80211_info *cfg, struct brcmf_if *ifp,
|
|
struct cfg80211_scan_request *request)
|
|
{
|
|
struct brcmf_pub *drvr = cfg->pub;
|
|
s32 params_size = BRCMF_SCAN_PARAMS_FIXED_SIZE +
|
|
offsetof(struct brcmf_escan_params_le, params_le);
|
|
struct brcmf_escan_params_le *params;
|
|
s32 err = 0;
|
|
|
|
brcmf_dbg(SCAN, "E-SCAN START\n");
|
|
|
|
if (request != NULL) {
|
|
/* Allocate space for populating ssids in struct */
|
|
params_size += sizeof(u32) * ((request->n_channels + 1) / 2);
|
|
|
|
/* Allocate space for populating ssids in struct */
|
|
params_size += sizeof(struct brcmf_ssid_le) * request->n_ssids;
|
|
}
|
|
|
|
params = kzalloc(params_size, GFP_KERNEL);
|
|
if (!params) {
|
|
err = -ENOMEM;
|
|
goto exit;
|
|
}
|
|
BUG_ON(params_size + sizeof("escan") >= BRCMF_DCMD_MEDLEN);
|
|
brcmf_escan_prep(cfg, ¶ms->params_le, request);
|
|
params->version = cpu_to_le32(BRCMF_ESCAN_REQ_VERSION);
|
|
params->action = cpu_to_le16(WL_ESCAN_ACTION_START);
|
|
params->sync_id = cpu_to_le16(0x1234);
|
|
|
|
err = brcmf_fil_iovar_data_set(ifp, "escan", params, params_size);
|
|
if (err) {
|
|
if (err == -EBUSY)
|
|
brcmf_dbg(INFO, "system busy : escan canceled\n");
|
|
else
|
|
bphy_err(drvr, "error (%d)\n", err);
|
|
}
|
|
|
|
kfree(params);
|
|
exit:
|
|
return err;
|
|
}
|
|
|
|
static s32
|
|
brcmf_do_escan(struct brcmf_if *ifp, struct cfg80211_scan_request *request)
|
|
{
|
|
struct brcmf_cfg80211_info *cfg = ifp->drvr->config;
|
|
s32 err;
|
|
struct brcmf_scan_results *results;
|
|
struct escan_info *escan = &cfg->escan_info;
|
|
|
|
brcmf_dbg(SCAN, "Enter\n");
|
|
escan->ifp = ifp;
|
|
escan->wiphy = cfg->wiphy;
|
|
escan->escan_state = WL_ESCAN_STATE_SCANNING;
|
|
|
|
brcmf_scan_config_mpc(ifp, 0);
|
|
results = (struct brcmf_scan_results *)cfg->escan_info.escan_buf;
|
|
results->version = 0;
|
|
results->count = 0;
|
|
results->buflen = WL_ESCAN_RESULTS_FIXED_SIZE;
|
|
|
|
err = escan->run(cfg, ifp, request);
|
|
if (err)
|
|
brcmf_scan_config_mpc(ifp, 1);
|
|
return err;
|
|
}
|
|
|
|
static s32
|
|
brcmf_cfg80211_scan(struct wiphy *wiphy, struct cfg80211_scan_request *request)
|
|
{
|
|
struct brcmf_cfg80211_info *cfg = wiphy_to_cfg(wiphy);
|
|
struct brcmf_pub *drvr = cfg->pub;
|
|
struct brcmf_cfg80211_vif *vif;
|
|
s32 err = 0;
|
|
|
|
brcmf_dbg(TRACE, "Enter\n");
|
|
vif = container_of(request->wdev, struct brcmf_cfg80211_vif, wdev);
|
|
if (!check_vif_up(vif))
|
|
return -EIO;
|
|
|
|
if (test_bit(BRCMF_SCAN_STATUS_BUSY, &cfg->scan_status)) {
|
|
bphy_err(drvr, "Scanning already: status (%lu)\n",
|
|
cfg->scan_status);
|
|
return -EAGAIN;
|
|
}
|
|
if (test_bit(BRCMF_SCAN_STATUS_ABORT, &cfg->scan_status)) {
|
|
bphy_err(drvr, "Scanning being aborted: status (%lu)\n",
|
|
cfg->scan_status);
|
|
return -EAGAIN;
|
|
}
|
|
if (test_bit(BRCMF_SCAN_STATUS_SUPPRESS, &cfg->scan_status)) {
|
|
bphy_err(drvr, "Scanning suppressed: status (%lu)\n",
|
|
cfg->scan_status);
|
|
return -EAGAIN;
|
|
}
|
|
if (test_bit(BRCMF_VIF_STATUS_CONNECTING, &vif->sme_state)) {
|
|
bphy_err(drvr, "Connecting: status (%lu)\n", vif->sme_state);
|
|
return -EAGAIN;
|
|
}
|
|
|
|
/* If scan req comes for p2p0, send it over primary I/F */
|
|
if (vif == cfg->p2p.bss_idx[P2PAPI_BSSCFG_DEVICE].vif)
|
|
vif = cfg->p2p.bss_idx[P2PAPI_BSSCFG_PRIMARY].vif;
|
|
|
|
brcmf_dbg(SCAN, "START ESCAN\n");
|
|
|
|
cfg->scan_request = request;
|
|
set_bit(BRCMF_SCAN_STATUS_BUSY, &cfg->scan_status);
|
|
|
|
cfg->escan_info.run = brcmf_run_escan;
|
|
err = brcmf_p2p_scan_prep(wiphy, request, vif);
|
|
if (err)
|
|
goto scan_out;
|
|
|
|
err = brcmf_vif_set_mgmt_ie(vif, BRCMF_VNDR_IE_PRBREQ_FLAG,
|
|
request->ie, request->ie_len);
|
|
if (err)
|
|
goto scan_out;
|
|
|
|
err = brcmf_do_escan(vif->ifp, request);
|
|
if (err)
|
|
goto scan_out;
|
|
|
|
/* Arm scan timeout timer */
|
|
mod_timer(&cfg->escan_timeout,
|
|
jiffies + msecs_to_jiffies(BRCMF_ESCAN_TIMER_INTERVAL_MS));
|
|
|
|
return 0;
|
|
|
|
scan_out:
|
|
bphy_err(drvr, "scan error (%d)\n", err);
|
|
clear_bit(BRCMF_SCAN_STATUS_BUSY, &cfg->scan_status);
|
|
cfg->scan_request = NULL;
|
|
return err;
|
|
}
|
|
|
|
static s32 brcmf_set_rts(struct net_device *ndev, u32 rts_threshold)
|
|
{
|
|
struct brcmf_if *ifp = netdev_priv(ndev);
|
|
struct brcmf_pub *drvr = ifp->drvr;
|
|
s32 err = 0;
|
|
|
|
err = brcmf_fil_iovar_int_set(ifp, "rtsthresh", rts_threshold);
|
|
if (err)
|
|
bphy_err(drvr, "Error (%d)\n", err);
|
|
|
|
return err;
|
|
}
|
|
|
|
static s32 brcmf_set_frag(struct net_device *ndev, u32 frag_threshold)
|
|
{
|
|
struct brcmf_if *ifp = netdev_priv(ndev);
|
|
struct brcmf_pub *drvr = ifp->drvr;
|
|
s32 err = 0;
|
|
|
|
err = brcmf_fil_iovar_int_set(ifp, "fragthresh",
|
|
frag_threshold);
|
|
if (err)
|
|
bphy_err(drvr, "Error (%d)\n", err);
|
|
|
|
return err;
|
|
}
|
|
|
|
static s32 brcmf_set_retry(struct net_device *ndev, u32 retry, bool l)
|
|
{
|
|
struct brcmf_if *ifp = netdev_priv(ndev);
|
|
struct brcmf_pub *drvr = ifp->drvr;
|
|
s32 err = 0;
|
|
u32 cmd = (l ? BRCMF_C_SET_LRL : BRCMF_C_SET_SRL);
|
|
|
|
err = brcmf_fil_cmd_int_set(ifp, cmd, retry);
|
|
if (err) {
|
|
bphy_err(drvr, "cmd (%d) , error (%d)\n", cmd, err);
|
|
return err;
|
|
}
|
|
return err;
|
|
}
|
|
|
|
static s32 brcmf_cfg80211_set_wiphy_params(struct wiphy *wiphy, u32 changed)
|
|
{
|
|
struct brcmf_cfg80211_info *cfg = wiphy_to_cfg(wiphy);
|
|
struct net_device *ndev = cfg_to_ndev(cfg);
|
|
struct brcmf_if *ifp = netdev_priv(ndev);
|
|
s32 err = 0;
|
|
|
|
brcmf_dbg(TRACE, "Enter\n");
|
|
if (!check_vif_up(ifp->vif))
|
|
return -EIO;
|
|
|
|
if (changed & WIPHY_PARAM_RTS_THRESHOLD &&
|
|
(cfg->conf->rts_threshold != wiphy->rts_threshold)) {
|
|
cfg->conf->rts_threshold = wiphy->rts_threshold;
|
|
err = brcmf_set_rts(ndev, cfg->conf->rts_threshold);
|
|
if (!err)
|
|
goto done;
|
|
}
|
|
if (changed & WIPHY_PARAM_FRAG_THRESHOLD &&
|
|
(cfg->conf->frag_threshold != wiphy->frag_threshold)) {
|
|
cfg->conf->frag_threshold = wiphy->frag_threshold;
|
|
err = brcmf_set_frag(ndev, cfg->conf->frag_threshold);
|
|
if (!err)
|
|
goto done;
|
|
}
|
|
if (changed & WIPHY_PARAM_RETRY_LONG
|
|
&& (cfg->conf->retry_long != wiphy->retry_long)) {
|
|
cfg->conf->retry_long = wiphy->retry_long;
|
|
err = brcmf_set_retry(ndev, cfg->conf->retry_long, true);
|
|
if (!err)
|
|
goto done;
|
|
}
|
|
if (changed & WIPHY_PARAM_RETRY_SHORT
|
|
&& (cfg->conf->retry_short != wiphy->retry_short)) {
|
|
cfg->conf->retry_short = wiphy->retry_short;
|
|
err = brcmf_set_retry(ndev, cfg->conf->retry_short, false);
|
|
if (!err)
|
|
goto done;
|
|
}
|
|
|
|
done:
|
|
brcmf_dbg(TRACE, "Exit\n");
|
|
return err;
|
|
}
|
|
|
|
static void brcmf_init_prof(struct brcmf_cfg80211_profile *prof)
|
|
{
|
|
memset(prof, 0, sizeof(*prof));
|
|
}
|
|
|
|
static u16 brcmf_map_fw_linkdown_reason(const struct brcmf_event_msg *e)
|
|
{
|
|
u16 reason;
|
|
|
|
switch (e->event_code) {
|
|
case BRCMF_E_DEAUTH:
|
|
case BRCMF_E_DEAUTH_IND:
|
|
case BRCMF_E_DISASSOC_IND:
|
|
reason = e->reason;
|
|
break;
|
|
case BRCMF_E_LINK:
|
|
default:
|
|
reason = 0;
|
|
break;
|
|
}
|
|
return reason;
|
|
}
|
|
|
|
static int brcmf_set_pmk(struct brcmf_if *ifp, const u8 *pmk_data, u16 pmk_len)
|
|
{
|
|
struct brcmf_pub *drvr = ifp->drvr;
|
|
struct brcmf_wsec_pmk_le pmk;
|
|
int err;
|
|
|
|
memset(&pmk, 0, sizeof(pmk));
|
|
|
|
/* pass pmk directly */
|
|
pmk.key_len = cpu_to_le16(pmk_len);
|
|
pmk.flags = cpu_to_le16(0);
|
|
memcpy(pmk.key, pmk_data, pmk_len);
|
|
|
|
/* store psk in firmware */
|
|
err = brcmf_fil_cmd_data_set(ifp, BRCMF_C_SET_WSEC_PMK,
|
|
&pmk, sizeof(pmk));
|
|
if (err < 0)
|
|
bphy_err(drvr, "failed to change PSK in firmware (len=%u)\n",
|
|
pmk_len);
|
|
|
|
return err;
|
|
}
|
|
|
|
static int brcmf_set_sae_password(struct brcmf_if *ifp, const u8 *pwd_data,
|
|
u16 pwd_len)
|
|
{
|
|
struct brcmf_pub *drvr = ifp->drvr;
|
|
struct brcmf_wsec_sae_pwd_le sae_pwd;
|
|
int err;
|
|
|
|
if (pwd_len > BRCMF_WSEC_MAX_SAE_PASSWORD_LEN) {
|
|
bphy_err(drvr, "sae_password must be less than %d\n",
|
|
BRCMF_WSEC_MAX_SAE_PASSWORD_LEN);
|
|
return -EINVAL;
|
|
}
|
|
|
|
sae_pwd.key_len = cpu_to_le16(pwd_len);
|
|
memcpy(sae_pwd.key, pwd_data, pwd_len);
|
|
|
|
err = brcmf_fil_iovar_data_set(ifp, "sae_password", &sae_pwd,
|
|
sizeof(sae_pwd));
|
|
if (err < 0)
|
|
bphy_err(drvr, "failed to set SAE password in firmware (len=%u)\n",
|
|
pwd_len);
|
|
|
|
return err;
|
|
}
|
|
|
|
static void brcmf_link_down(struct brcmf_cfg80211_vif *vif, u16 reason,
|
|
bool locally_generated)
|
|
{
|
|
struct brcmf_cfg80211_info *cfg = wiphy_to_cfg(vif->wdev.wiphy);
|
|
struct brcmf_pub *drvr = cfg->pub;
|
|
bool bus_up = drvr->bus_if->state == BRCMF_BUS_UP;
|
|
s32 err = 0;
|
|
|
|
brcmf_dbg(TRACE, "Enter\n");
|
|
|
|
if (test_and_clear_bit(BRCMF_VIF_STATUS_CONNECTED, &vif->sme_state)) {
|
|
if (bus_up) {
|
|
brcmf_dbg(INFO, "Call WLC_DISASSOC to stop excess roaming\n");
|
|
err = brcmf_fil_cmd_data_set(vif->ifp,
|
|
BRCMF_C_DISASSOC, NULL, 0);
|
|
if (err)
|
|
bphy_err(drvr, "WLC_DISASSOC failed (%d)\n",
|
|
err);
|
|
}
|
|
|
|
if ((vif->wdev.iftype == NL80211_IFTYPE_STATION) ||
|
|
(vif->wdev.iftype == NL80211_IFTYPE_P2P_CLIENT))
|
|
cfg80211_disconnected(vif->wdev.netdev, reason, NULL, 0,
|
|
locally_generated, GFP_KERNEL);
|
|
}
|
|
clear_bit(BRCMF_VIF_STATUS_CONNECTING, &vif->sme_state);
|
|
clear_bit(BRCMF_SCAN_STATUS_SUPPRESS, &cfg->scan_status);
|
|
brcmf_btcoex_set_mode(vif, BRCMF_BTCOEX_ENABLED, 0);
|
|
if (vif->profile.use_fwsup != BRCMF_PROFILE_FWSUP_NONE) {
|
|
if (bus_up)
|
|
brcmf_set_pmk(vif->ifp, NULL, 0);
|
|
vif->profile.use_fwsup = BRCMF_PROFILE_FWSUP_NONE;
|
|
}
|
|
brcmf_dbg(TRACE, "Exit\n");
|
|
}
|
|
|
|
static s32
|
|
brcmf_cfg80211_join_ibss(struct wiphy *wiphy, struct net_device *ndev,
|
|
struct cfg80211_ibss_params *params)
|
|
{
|
|
struct brcmf_cfg80211_info *cfg = wiphy_to_cfg(wiphy);
|
|
struct brcmf_if *ifp = netdev_priv(ndev);
|
|
struct brcmf_cfg80211_profile *profile = &ifp->vif->profile;
|
|
struct brcmf_pub *drvr = cfg->pub;
|
|
struct brcmf_join_params join_params;
|
|
size_t join_params_size = 0;
|
|
s32 err = 0;
|
|
s32 wsec = 0;
|
|
s32 bcnprd;
|
|
u16 chanspec;
|
|
u32 ssid_len;
|
|
|
|
brcmf_dbg(TRACE, "Enter\n");
|
|
if (!check_vif_up(ifp->vif))
|
|
return -EIO;
|
|
|
|
if (params->ssid)
|
|
brcmf_dbg(CONN, "SSID: %s\n", params->ssid);
|
|
else {
|
|
brcmf_dbg(CONN, "SSID: NULL, Not supported\n");
|
|
return -EOPNOTSUPP;
|
|
}
|
|
|
|
set_bit(BRCMF_VIF_STATUS_CONNECTING, &ifp->vif->sme_state);
|
|
|
|
if (params->bssid)
|
|
brcmf_dbg(CONN, "BSSID: %pM\n", params->bssid);
|
|
else
|
|
brcmf_dbg(CONN, "No BSSID specified\n");
|
|
|
|
if (params->chandef.chan)
|
|
brcmf_dbg(CONN, "channel: %d\n",
|
|
params->chandef.chan->center_freq);
|
|
else
|
|
brcmf_dbg(CONN, "no channel specified\n");
|
|
|
|
if (params->channel_fixed)
|
|
brcmf_dbg(CONN, "fixed channel required\n");
|
|
else
|
|
brcmf_dbg(CONN, "no fixed channel required\n");
|
|
|
|
if (params->ie && params->ie_len)
|
|
brcmf_dbg(CONN, "ie len: %d\n", params->ie_len);
|
|
else
|
|
brcmf_dbg(CONN, "no ie specified\n");
|
|
|
|
if (params->beacon_interval)
|
|
brcmf_dbg(CONN, "beacon interval: %d\n",
|
|
params->beacon_interval);
|
|
else
|
|
brcmf_dbg(CONN, "no beacon interval specified\n");
|
|
|
|
if (params->basic_rates)
|
|
brcmf_dbg(CONN, "basic rates: %08X\n", params->basic_rates);
|
|
else
|
|
brcmf_dbg(CONN, "no basic rates specified\n");
|
|
|
|
if (params->privacy)
|
|
brcmf_dbg(CONN, "privacy required\n");
|
|
else
|
|
brcmf_dbg(CONN, "no privacy required\n");
|
|
|
|
/* Configure Privacy for starter */
|
|
if (params->privacy)
|
|
wsec |= WEP_ENABLED;
|
|
|
|
err = brcmf_fil_iovar_int_set(ifp, "wsec", wsec);
|
|
if (err) {
|
|
bphy_err(drvr, "wsec failed (%d)\n", err);
|
|
goto done;
|
|
}
|
|
|
|
/* Configure Beacon Interval for starter */
|
|
if (params->beacon_interval)
|
|
bcnprd = params->beacon_interval;
|
|
else
|
|
bcnprd = 100;
|
|
|
|
err = brcmf_fil_cmd_int_set(ifp, BRCMF_C_SET_BCNPRD, bcnprd);
|
|
if (err) {
|
|
bphy_err(drvr, "WLC_SET_BCNPRD failed (%d)\n", err);
|
|
goto done;
|
|
}
|
|
|
|
/* Configure required join parameter */
|
|
memset(&join_params, 0, sizeof(struct brcmf_join_params));
|
|
|
|
/* SSID */
|
|
ssid_len = min_t(u32, params->ssid_len, IEEE80211_MAX_SSID_LEN);
|
|
memcpy(join_params.ssid_le.SSID, params->ssid, ssid_len);
|
|
join_params.ssid_le.SSID_len = cpu_to_le32(ssid_len);
|
|
join_params_size = sizeof(join_params.ssid_le);
|
|
|
|
/* BSSID */
|
|
if (params->bssid) {
|
|
memcpy(join_params.params_le.bssid, params->bssid, ETH_ALEN);
|
|
join_params_size += BRCMF_ASSOC_PARAMS_FIXED_SIZE;
|
|
memcpy(profile->bssid, params->bssid, ETH_ALEN);
|
|
} else {
|
|
eth_broadcast_addr(join_params.params_le.bssid);
|
|
eth_zero_addr(profile->bssid);
|
|
}
|
|
|
|
/* Channel */
|
|
if (params->chandef.chan) {
|
|
u32 target_channel;
|
|
|
|
cfg->channel =
|
|
ieee80211_frequency_to_channel(
|
|
params->chandef.chan->center_freq);
|
|
if (params->channel_fixed) {
|
|
/* adding chanspec */
|
|
chanspec = chandef_to_chanspec(&cfg->d11inf,
|
|
¶ms->chandef);
|
|
join_params.params_le.chanspec_list[0] =
|
|
cpu_to_le16(chanspec);
|
|
join_params.params_le.chanspec_num = cpu_to_le32(1);
|
|
join_params_size += sizeof(join_params.params_le);
|
|
}
|
|
|
|
/* set channel for starter */
|
|
target_channel = cfg->channel;
|
|
err = brcmf_fil_cmd_int_set(ifp, BRCMF_C_SET_CHANNEL,
|
|
target_channel);
|
|
if (err) {
|
|
bphy_err(drvr, "WLC_SET_CHANNEL failed (%d)\n", err);
|
|
goto done;
|
|
}
|
|
} else
|
|
cfg->channel = 0;
|
|
|
|
cfg->ibss_starter = false;
|
|
|
|
|
|
err = brcmf_fil_cmd_data_set(ifp, BRCMF_C_SET_SSID,
|
|
&join_params, join_params_size);
|
|
if (err) {
|
|
bphy_err(drvr, "WLC_SET_SSID failed (%d)\n", err);
|
|
goto done;
|
|
}
|
|
|
|
done:
|
|
if (err)
|
|
clear_bit(BRCMF_VIF_STATUS_CONNECTING, &ifp->vif->sme_state);
|
|
brcmf_dbg(TRACE, "Exit\n");
|
|
return err;
|
|
}
|
|
|
|
static s32
|
|
brcmf_cfg80211_leave_ibss(struct wiphy *wiphy, struct net_device *ndev)
|
|
{
|
|
struct brcmf_if *ifp = netdev_priv(ndev);
|
|
|
|
brcmf_dbg(TRACE, "Enter\n");
|
|
if (!check_vif_up(ifp->vif)) {
|
|
/* When driver is being unloaded, it can end up here. If an
|
|
* error is returned then later on a debug trace in the wireless
|
|
* core module will be printed. To avoid this 0 is returned.
|
|
*/
|
|
return 0;
|
|
}
|
|
|
|
brcmf_link_down(ifp->vif, WLAN_REASON_DEAUTH_LEAVING, true);
|
|
brcmf_net_setcarrier(ifp, false);
|
|
|
|
brcmf_dbg(TRACE, "Exit\n");
|
|
|
|
return 0;
|
|
}
|
|
|
|
static s32 brcmf_set_wpa_version(struct net_device *ndev,
|
|
struct cfg80211_connect_params *sme)
|
|
{
|
|
struct brcmf_if *ifp = netdev_priv(ndev);
|
|
struct brcmf_cfg80211_profile *profile = ndev_to_prof(ndev);
|
|
struct brcmf_pub *drvr = ifp->drvr;
|
|
struct brcmf_cfg80211_security *sec;
|
|
s32 val = 0;
|
|
s32 err = 0;
|
|
|
|
if (sme->crypto.wpa_versions & NL80211_WPA_VERSION_1)
|
|
val = WPA_AUTH_PSK | WPA_AUTH_UNSPECIFIED;
|
|
else if (sme->crypto.wpa_versions & NL80211_WPA_VERSION_2)
|
|
val = WPA2_AUTH_PSK | WPA2_AUTH_UNSPECIFIED;
|
|
else if (sme->crypto.wpa_versions & NL80211_WPA_VERSION_3)
|
|
val = WPA3_AUTH_SAE_PSK;
|
|
else
|
|
val = WPA_AUTH_DISABLED;
|
|
brcmf_dbg(CONN, "setting wpa_auth to 0x%0x\n", val);
|
|
err = brcmf_fil_bsscfg_int_set(ifp, "wpa_auth", val);
|
|
if (err) {
|
|
bphy_err(drvr, "set wpa_auth failed (%d)\n", err);
|
|
return err;
|
|
}
|
|
sec = &profile->sec;
|
|
sec->wpa_versions = sme->crypto.wpa_versions;
|
|
return err;
|
|
}
|
|
|
|
static s32 brcmf_set_auth_type(struct net_device *ndev,
|
|
struct cfg80211_connect_params *sme)
|
|
{
|
|
struct brcmf_if *ifp = netdev_priv(ndev);
|
|
struct brcmf_cfg80211_profile *profile = ndev_to_prof(ndev);
|
|
struct brcmf_pub *drvr = ifp->drvr;
|
|
struct brcmf_cfg80211_security *sec;
|
|
s32 val = 0;
|
|
s32 err = 0;
|
|
|
|
switch (sme->auth_type) {
|
|
case NL80211_AUTHTYPE_OPEN_SYSTEM:
|
|
val = 0;
|
|
brcmf_dbg(CONN, "open system\n");
|
|
break;
|
|
case NL80211_AUTHTYPE_SHARED_KEY:
|
|
val = 1;
|
|
brcmf_dbg(CONN, "shared key\n");
|
|
break;
|
|
case NL80211_AUTHTYPE_SAE:
|
|
val = 3;
|
|
brcmf_dbg(CONN, "SAE authentication\n");
|
|
break;
|
|
default:
|
|
val = 2;
|
|
brcmf_dbg(CONN, "automatic, auth type (%d)\n", sme->auth_type);
|
|
break;
|
|
}
|
|
|
|
err = brcmf_fil_bsscfg_int_set(ifp, "auth", val);
|
|
if (err) {
|
|
bphy_err(drvr, "set auth failed (%d)\n", err);
|
|
return err;
|
|
}
|
|
sec = &profile->sec;
|
|
sec->auth_type = sme->auth_type;
|
|
return err;
|
|
}
|
|
|
|
static s32
|
|
brcmf_set_wsec_mode(struct net_device *ndev,
|
|
struct cfg80211_connect_params *sme)
|
|
{
|
|
struct brcmf_if *ifp = netdev_priv(ndev);
|
|
struct brcmf_cfg80211_profile *profile = ndev_to_prof(ndev);
|
|
struct brcmf_pub *drvr = ifp->drvr;
|
|
struct brcmf_cfg80211_security *sec;
|
|
s32 pval = 0;
|
|
s32 gval = 0;
|
|
s32 wsec;
|
|
s32 err = 0;
|
|
|
|
if (sme->crypto.n_ciphers_pairwise) {
|
|
switch (sme->crypto.ciphers_pairwise[0]) {
|
|
case WLAN_CIPHER_SUITE_WEP40:
|
|
case WLAN_CIPHER_SUITE_WEP104:
|
|
pval = WEP_ENABLED;
|
|
break;
|
|
case WLAN_CIPHER_SUITE_TKIP:
|
|
pval = TKIP_ENABLED;
|
|
break;
|
|
case WLAN_CIPHER_SUITE_CCMP:
|
|
pval = AES_ENABLED;
|
|
break;
|
|
case WLAN_CIPHER_SUITE_AES_CMAC:
|
|
pval = AES_ENABLED;
|
|
break;
|
|
default:
|
|
bphy_err(drvr, "invalid cipher pairwise (%d)\n",
|
|
sme->crypto.ciphers_pairwise[0]);
|
|
return -EINVAL;
|
|
}
|
|
}
|
|
if (sme->crypto.cipher_group) {
|
|
switch (sme->crypto.cipher_group) {
|
|
case WLAN_CIPHER_SUITE_WEP40:
|
|
case WLAN_CIPHER_SUITE_WEP104:
|
|
gval = WEP_ENABLED;
|
|
break;
|
|
case WLAN_CIPHER_SUITE_TKIP:
|
|
gval = TKIP_ENABLED;
|
|
break;
|
|
case WLAN_CIPHER_SUITE_CCMP:
|
|
gval = AES_ENABLED;
|
|
break;
|
|
case WLAN_CIPHER_SUITE_AES_CMAC:
|
|
gval = AES_ENABLED;
|
|
break;
|
|
default:
|
|
bphy_err(drvr, "invalid cipher group (%d)\n",
|
|
sme->crypto.cipher_group);
|
|
return -EINVAL;
|
|
}
|
|
}
|
|
|
|
brcmf_dbg(CONN, "pval (%d) gval (%d)\n", pval, gval);
|
|
/* In case of privacy, but no security and WPS then simulate */
|
|
/* setting AES. WPS-2.0 allows no security */
|
|
if (brcmf_find_wpsie(sme->ie, sme->ie_len) && !pval && !gval &&
|
|
sme->privacy)
|
|
pval = AES_ENABLED;
|
|
|
|
wsec = pval | gval;
|
|
err = brcmf_fil_bsscfg_int_set(ifp, "wsec", wsec);
|
|
if (err) {
|
|
bphy_err(drvr, "error (%d)\n", err);
|
|
return err;
|
|
}
|
|
|
|
sec = &profile->sec;
|
|
sec->cipher_pairwise = sme->crypto.ciphers_pairwise[0];
|
|
sec->cipher_group = sme->crypto.cipher_group;
|
|
|
|
return err;
|
|
}
|
|
|
|
static s32
|
|
brcmf_set_key_mgmt(struct net_device *ndev, struct cfg80211_connect_params *sme)
|
|
{
|
|
struct brcmf_if *ifp = netdev_priv(ndev);
|
|
struct brcmf_cfg80211_profile *profile = &ifp->vif->profile;
|
|
struct brcmf_pub *drvr = ifp->drvr;
|
|
s32 val;
|
|
s32 err;
|
|
const struct brcmf_tlv *rsn_ie;
|
|
const u8 *ie;
|
|
u32 ie_len;
|
|
u32 offset;
|
|
u16 rsn_cap;
|
|
u32 mfp;
|
|
u16 count;
|
|
|
|
profile->use_fwsup = BRCMF_PROFILE_FWSUP_NONE;
|
|
profile->is_ft = false;
|
|
|
|
if (!sme->crypto.n_akm_suites)
|
|
return 0;
|
|
|
|
err = brcmf_fil_bsscfg_int_get(netdev_priv(ndev), "wpa_auth", &val);
|
|
if (err) {
|
|
bphy_err(drvr, "could not get wpa_auth (%d)\n", err);
|
|
return err;
|
|
}
|
|
if (val & (WPA_AUTH_PSK | WPA_AUTH_UNSPECIFIED)) {
|
|
switch (sme->crypto.akm_suites[0]) {
|
|
case WLAN_AKM_SUITE_8021X:
|
|
val = WPA_AUTH_UNSPECIFIED;
|
|
if (sme->want_1x)
|
|
profile->use_fwsup = BRCMF_PROFILE_FWSUP_1X;
|
|
break;
|
|
case WLAN_AKM_SUITE_PSK:
|
|
val = WPA_AUTH_PSK;
|
|
break;
|
|
default:
|
|
bphy_err(drvr, "invalid akm suite (%d)\n",
|
|
sme->crypto.akm_suites[0]);
|
|
return -EINVAL;
|
|
}
|
|
} else if (val & (WPA2_AUTH_PSK | WPA2_AUTH_UNSPECIFIED)) {
|
|
switch (sme->crypto.akm_suites[0]) {
|
|
case WLAN_AKM_SUITE_8021X:
|
|
val = WPA2_AUTH_UNSPECIFIED;
|
|
if (sme->want_1x)
|
|
profile->use_fwsup = BRCMF_PROFILE_FWSUP_1X;
|
|
break;
|
|
case WLAN_AKM_SUITE_8021X_SHA256:
|
|
val = WPA2_AUTH_1X_SHA256;
|
|
if (sme->want_1x)
|
|
profile->use_fwsup = BRCMF_PROFILE_FWSUP_1X;
|
|
break;
|
|
case WLAN_AKM_SUITE_PSK_SHA256:
|
|
val = WPA2_AUTH_PSK_SHA256;
|
|
break;
|
|
case WLAN_AKM_SUITE_PSK:
|
|
val = WPA2_AUTH_PSK;
|
|
break;
|
|
case WLAN_AKM_SUITE_FT_8021X:
|
|
val = WPA2_AUTH_UNSPECIFIED | WPA2_AUTH_FT;
|
|
profile->is_ft = true;
|
|
if (sme->want_1x)
|
|
profile->use_fwsup = BRCMF_PROFILE_FWSUP_1X;
|
|
break;
|
|
case WLAN_AKM_SUITE_FT_PSK:
|
|
val = WPA2_AUTH_PSK | WPA2_AUTH_FT;
|
|
profile->is_ft = true;
|
|
break;
|
|
default:
|
|
bphy_err(drvr, "invalid akm suite (%d)\n",
|
|
sme->crypto.akm_suites[0]);
|
|
return -EINVAL;
|
|
}
|
|
} else if (val & WPA3_AUTH_SAE_PSK) {
|
|
switch (sme->crypto.akm_suites[0]) {
|
|
case WLAN_AKM_SUITE_SAE:
|
|
val = WPA3_AUTH_SAE_PSK;
|
|
if (sme->crypto.sae_pwd) {
|
|
brcmf_dbg(INFO, "using SAE offload\n");
|
|
profile->use_fwsup = BRCMF_PROFILE_FWSUP_SAE;
|
|
}
|
|
break;
|
|
case WLAN_AKM_SUITE_FT_OVER_SAE:
|
|
val = WPA3_AUTH_SAE_PSK | WPA2_AUTH_FT;
|
|
profile->is_ft = true;
|
|
if (sme->crypto.sae_pwd) {
|
|
brcmf_dbg(INFO, "using SAE offload\n");
|
|
profile->use_fwsup = BRCMF_PROFILE_FWSUP_SAE;
|
|
}
|
|
break;
|
|
default:
|
|
bphy_err(drvr, "invalid akm suite (%d)\n",
|
|
sme->crypto.akm_suites[0]);
|
|
return -EINVAL;
|
|
}
|
|
}
|
|
|
|
if (profile->use_fwsup == BRCMF_PROFILE_FWSUP_1X)
|
|
brcmf_dbg(INFO, "using 1X offload\n");
|
|
|
|
if (!brcmf_feat_is_enabled(ifp, BRCMF_FEAT_MFP))
|
|
goto skip_mfp_config;
|
|
/* The MFP mode (1 or 2) needs to be determined, parse IEs. The
|
|
* IE will not be verified, just a quick search for MFP config
|
|
*/
|
|
rsn_ie = brcmf_parse_tlvs((const u8 *)sme->ie, sme->ie_len,
|
|
WLAN_EID_RSN);
|
|
if (!rsn_ie)
|
|
goto skip_mfp_config;
|
|
ie = (const u8 *)rsn_ie;
|
|
ie_len = rsn_ie->len + TLV_HDR_LEN;
|
|
/* Skip unicast suite */
|
|
offset = TLV_HDR_LEN + WPA_IE_VERSION_LEN + WPA_IE_MIN_OUI_LEN;
|
|
if (offset + WPA_IE_SUITE_COUNT_LEN >= ie_len)
|
|
goto skip_mfp_config;
|
|
/* Skip multicast suite */
|
|
count = ie[offset] + (ie[offset + 1] << 8);
|
|
offset += WPA_IE_SUITE_COUNT_LEN + (count * WPA_IE_MIN_OUI_LEN);
|
|
if (offset + WPA_IE_SUITE_COUNT_LEN >= ie_len)
|
|
goto skip_mfp_config;
|
|
/* Skip auth key management suite(s) */
|
|
count = ie[offset] + (ie[offset + 1] << 8);
|
|
offset += WPA_IE_SUITE_COUNT_LEN + (count * WPA_IE_MIN_OUI_LEN);
|
|
if (offset + WPA_IE_SUITE_COUNT_LEN > ie_len)
|
|
goto skip_mfp_config;
|
|
/* Ready to read capabilities */
|
|
mfp = BRCMF_MFP_NONE;
|
|
rsn_cap = ie[offset] + (ie[offset + 1] << 8);
|
|
if (rsn_cap & RSN_CAP_MFPR_MASK)
|
|
mfp = BRCMF_MFP_REQUIRED;
|
|
else if (rsn_cap & RSN_CAP_MFPC_MASK)
|
|
mfp = BRCMF_MFP_CAPABLE;
|
|
brcmf_fil_bsscfg_int_set(netdev_priv(ndev), "mfp", mfp);
|
|
|
|
skip_mfp_config:
|
|
brcmf_dbg(CONN, "setting wpa_auth to %d\n", val);
|
|
err = brcmf_fil_bsscfg_int_set(netdev_priv(ndev), "wpa_auth", val);
|
|
if (err) {
|
|
bphy_err(drvr, "could not set wpa_auth (%d)\n", err);
|
|
return err;
|
|
}
|
|
|
|
return err;
|
|
}
|
|
|
|
static s32
|
|
brcmf_set_sharedkey(struct net_device *ndev,
|
|
struct cfg80211_connect_params *sme)
|
|
{
|
|
struct brcmf_if *ifp = netdev_priv(ndev);
|
|
struct brcmf_pub *drvr = ifp->drvr;
|
|
struct brcmf_cfg80211_profile *profile = ndev_to_prof(ndev);
|
|
struct brcmf_cfg80211_security *sec;
|
|
struct brcmf_wsec_key key;
|
|
s32 val;
|
|
s32 err = 0;
|
|
|
|
brcmf_dbg(CONN, "key len (%d)\n", sme->key_len);
|
|
|
|
if (sme->key_len == 0)
|
|
return 0;
|
|
|
|
sec = &profile->sec;
|
|
brcmf_dbg(CONN, "wpa_versions 0x%x cipher_pairwise 0x%x\n",
|
|
sec->wpa_versions, sec->cipher_pairwise);
|
|
|
|
if (sec->wpa_versions & (NL80211_WPA_VERSION_1 | NL80211_WPA_VERSION_2 |
|
|
NL80211_WPA_VERSION_3))
|
|
return 0;
|
|
|
|
if (!(sec->cipher_pairwise &
|
|
(WLAN_CIPHER_SUITE_WEP40 | WLAN_CIPHER_SUITE_WEP104)))
|
|
return 0;
|
|
|
|
memset(&key, 0, sizeof(key));
|
|
key.len = (u32) sme->key_len;
|
|
key.index = (u32) sme->key_idx;
|
|
if (key.len > sizeof(key.data)) {
|
|
bphy_err(drvr, "Too long key length (%u)\n", key.len);
|
|
return -EINVAL;
|
|
}
|
|
memcpy(key.data, sme->key, key.len);
|
|
key.flags = BRCMF_PRIMARY_KEY;
|
|
switch (sec->cipher_pairwise) {
|
|
case WLAN_CIPHER_SUITE_WEP40:
|
|
key.algo = CRYPTO_ALGO_WEP1;
|
|
break;
|
|
case WLAN_CIPHER_SUITE_WEP104:
|
|
key.algo = CRYPTO_ALGO_WEP128;
|
|
break;
|
|
default:
|
|
bphy_err(drvr, "Invalid algorithm (%d)\n",
|
|
sme->crypto.ciphers_pairwise[0]);
|
|
return -EINVAL;
|
|
}
|
|
/* Set the new key/index */
|
|
brcmf_dbg(CONN, "key length (%d) key index (%d) algo (%d)\n",
|
|
key.len, key.index, key.algo);
|
|
brcmf_dbg(CONN, "key \"%s\"\n", key.data);
|
|
err = send_key_to_dongle(ifp, &key);
|
|
if (err)
|
|
return err;
|
|
|
|
if (sec->auth_type == NL80211_AUTHTYPE_SHARED_KEY) {
|
|
brcmf_dbg(CONN, "set auth_type to shared key\n");
|
|
val = WL_AUTH_SHARED_KEY; /* shared key */
|
|
err = brcmf_fil_bsscfg_int_set(ifp, "auth", val);
|
|
if (err)
|
|
bphy_err(drvr, "set auth failed (%d)\n", err);
|
|
}
|
|
return err;
|
|
}
|
|
|
|
static
|
|
enum nl80211_auth_type brcmf_war_auth_type(struct brcmf_if *ifp,
|
|
enum nl80211_auth_type type)
|
|
{
|
|
if (type == NL80211_AUTHTYPE_AUTOMATIC &&
|
|
brcmf_feat_is_quirk_enabled(ifp, BRCMF_FEAT_QUIRK_AUTO_AUTH)) {
|
|
brcmf_dbg(CONN, "WAR: use OPEN instead of AUTO\n");
|
|
type = NL80211_AUTHTYPE_OPEN_SYSTEM;
|
|
}
|
|
return type;
|
|
}
|
|
|
|
static void brcmf_set_join_pref(struct brcmf_if *ifp,
|
|
struct cfg80211_bss_selection *bss_select)
|
|
{
|
|
struct brcmf_pub *drvr = ifp->drvr;
|
|
struct brcmf_join_pref_params join_pref_params[2];
|
|
enum nl80211_band band;
|
|
int err, i = 0;
|
|
|
|
join_pref_params[i].len = 2;
|
|
join_pref_params[i].rssi_gain = 0;
|
|
|
|
if (bss_select->behaviour != NL80211_BSS_SELECT_ATTR_BAND_PREF)
|
|
brcmf_fil_cmd_int_set(ifp, BRCMF_C_SET_ASSOC_PREFER, WLC_BAND_AUTO);
|
|
|
|
switch (bss_select->behaviour) {
|
|
case __NL80211_BSS_SELECT_ATTR_INVALID:
|
|
brcmf_c_set_joinpref_default(ifp);
|
|
return;
|
|
case NL80211_BSS_SELECT_ATTR_BAND_PREF:
|
|
join_pref_params[i].type = BRCMF_JOIN_PREF_BAND;
|
|
band = bss_select->param.band_pref;
|
|
join_pref_params[i].band = nl80211_band_to_fwil(band);
|
|
i++;
|
|
break;
|
|
case NL80211_BSS_SELECT_ATTR_RSSI_ADJUST:
|
|
join_pref_params[i].type = BRCMF_JOIN_PREF_RSSI_DELTA;
|
|
band = bss_select->param.adjust.band;
|
|
join_pref_params[i].band = nl80211_band_to_fwil(band);
|
|
join_pref_params[i].rssi_gain = bss_select->param.adjust.delta;
|
|
i++;
|
|
break;
|
|
case NL80211_BSS_SELECT_ATTR_RSSI:
|
|
default:
|
|
break;
|
|
}
|
|
join_pref_params[i].type = BRCMF_JOIN_PREF_RSSI;
|
|
join_pref_params[i].len = 2;
|
|
join_pref_params[i].rssi_gain = 0;
|
|
join_pref_params[i].band = 0;
|
|
err = brcmf_fil_iovar_data_set(ifp, "join_pref", join_pref_params,
|
|
sizeof(join_pref_params));
|
|
if (err)
|
|
bphy_err(drvr, "Set join_pref error (%d)\n", err);
|
|
}
|
|
|
|
static s32
|
|
brcmf_cfg80211_connect(struct wiphy *wiphy, struct net_device *ndev,
|
|
struct cfg80211_connect_params *sme)
|
|
{
|
|
struct brcmf_cfg80211_info *cfg = wiphy_to_cfg(wiphy);
|
|
struct brcmf_if *ifp = netdev_priv(ndev);
|
|
struct brcmf_cfg80211_profile *profile = &ifp->vif->profile;
|
|
struct ieee80211_channel *chan = sme->channel;
|
|
struct brcmf_pub *drvr = ifp->drvr;
|
|
struct brcmf_join_params join_params;
|
|
size_t join_params_size;
|
|
const struct brcmf_tlv *rsn_ie;
|
|
const struct brcmf_vs_tlv *wpa_ie;
|
|
const void *ie;
|
|
u32 ie_len;
|
|
struct brcmf_ext_join_params_le *ext_join_params;
|
|
u16 chanspec;
|
|
s32 err = 0;
|
|
u32 ssid_len;
|
|
|
|
brcmf_dbg(TRACE, "Enter\n");
|
|
if (!check_vif_up(ifp->vif))
|
|
return -EIO;
|
|
|
|
if (!sme->ssid) {
|
|
bphy_err(drvr, "Invalid ssid\n");
|
|
return -EOPNOTSUPP;
|
|
}
|
|
|
|
if (ifp->vif == cfg->p2p.bss_idx[P2PAPI_BSSCFG_PRIMARY].vif) {
|
|
/* A normal (non P2P) connection request setup. */
|
|
ie = NULL;
|
|
ie_len = 0;
|
|
/* find the WPA_IE */
|
|
wpa_ie = brcmf_find_wpaie((u8 *)sme->ie, sme->ie_len);
|
|
if (wpa_ie) {
|
|
ie = wpa_ie;
|
|
ie_len = wpa_ie->len + TLV_HDR_LEN;
|
|
} else {
|
|
/* find the RSN_IE */
|
|
rsn_ie = brcmf_parse_tlvs((const u8 *)sme->ie,
|
|
sme->ie_len,
|
|
WLAN_EID_RSN);
|
|
if (rsn_ie) {
|
|
ie = rsn_ie;
|
|
ie_len = rsn_ie->len + TLV_HDR_LEN;
|
|
}
|
|
}
|
|
brcmf_fil_iovar_data_set(ifp, "wpaie", ie, ie_len);
|
|
}
|
|
|
|
err = brcmf_vif_set_mgmt_ie(ifp->vif, BRCMF_VNDR_IE_ASSOCREQ_FLAG,
|
|
sme->ie, sme->ie_len);
|
|
if (err)
|
|
bphy_err(drvr, "Set Assoc REQ IE Failed\n");
|
|
else
|
|
brcmf_dbg(TRACE, "Applied Vndr IEs for Assoc request\n");
|
|
|
|
set_bit(BRCMF_VIF_STATUS_CONNECTING, &ifp->vif->sme_state);
|
|
|
|
if (chan) {
|
|
cfg->channel =
|
|
ieee80211_frequency_to_channel(chan->center_freq);
|
|
chanspec = channel_to_chanspec(&cfg->d11inf, chan);
|
|
brcmf_dbg(CONN, "channel=%d, center_req=%d, chanspec=0x%04x\n",
|
|
cfg->channel, chan->center_freq, chanspec);
|
|
} else {
|
|
cfg->channel = 0;
|
|
chanspec = 0;
|
|
}
|
|
|
|
brcmf_dbg(INFO, "ie (%p), ie_len (%zd)\n", sme->ie, sme->ie_len);
|
|
|
|
err = brcmf_set_wpa_version(ndev, sme);
|
|
if (err) {
|
|
bphy_err(drvr, "wl_set_wpa_version failed (%d)\n", err);
|
|
goto done;
|
|
}
|
|
|
|
sme->auth_type = brcmf_war_auth_type(ifp, sme->auth_type);
|
|
err = brcmf_set_auth_type(ndev, sme);
|
|
if (err) {
|
|
bphy_err(drvr, "wl_set_auth_type failed (%d)\n", err);
|
|
goto done;
|
|
}
|
|
|
|
err = brcmf_set_wsec_mode(ndev, sme);
|
|
if (err) {
|
|
bphy_err(drvr, "wl_set_set_cipher failed (%d)\n", err);
|
|
goto done;
|
|
}
|
|
|
|
err = brcmf_set_key_mgmt(ndev, sme);
|
|
if (err) {
|
|
bphy_err(drvr, "wl_set_key_mgmt failed (%d)\n", err);
|
|
goto done;
|
|
}
|
|
|
|
err = brcmf_set_sharedkey(ndev, sme);
|
|
if (err) {
|
|
bphy_err(drvr, "brcmf_set_sharedkey failed (%d)\n", err);
|
|
goto done;
|
|
}
|
|
|
|
if (sme->crypto.psk &&
|
|
profile->use_fwsup != BRCMF_PROFILE_FWSUP_SAE) {
|
|
if (WARN_ON(profile->use_fwsup != BRCMF_PROFILE_FWSUP_NONE)) {
|
|
err = -EINVAL;
|
|
goto done;
|
|
}
|
|
brcmf_dbg(INFO, "using PSK offload\n");
|
|
profile->use_fwsup = BRCMF_PROFILE_FWSUP_PSK;
|
|
}
|
|
|
|
if (profile->use_fwsup != BRCMF_PROFILE_FWSUP_NONE) {
|
|
/* enable firmware supplicant for this interface */
|
|
err = brcmf_fil_iovar_int_set(ifp, "sup_wpa", 1);
|
|
if (err < 0) {
|
|
bphy_err(drvr, "failed to enable fw supplicant\n");
|
|
goto done;
|
|
}
|
|
}
|
|
|
|
if (profile->use_fwsup == BRCMF_PROFILE_FWSUP_PSK)
|
|
err = brcmf_set_pmk(ifp, sme->crypto.psk,
|
|
BRCMF_WSEC_MAX_PSK_LEN);
|
|
else if (profile->use_fwsup == BRCMF_PROFILE_FWSUP_SAE) {
|
|
/* clean up user-space RSNE */
|
|
err = brcmf_fil_iovar_data_set(ifp, "wpaie", NULL, 0);
|
|
if (err) {
|
|
bphy_err(drvr, "failed to clean up user-space RSNE\n");
|
|
goto done;
|
|
}
|
|
err = brcmf_set_sae_password(ifp, sme->crypto.sae_pwd,
|
|
sme->crypto.sae_pwd_len);
|
|
if (!err && sme->crypto.psk)
|
|
err = brcmf_set_pmk(ifp, sme->crypto.psk,
|
|
BRCMF_WSEC_MAX_PSK_LEN);
|
|
}
|
|
if (err)
|
|
goto done;
|
|
|
|
/* Join with specific BSSID and cached SSID
|
|
* If SSID is zero join based on BSSID only
|
|
*/
|
|
join_params_size = offsetof(struct brcmf_ext_join_params_le, assoc_le) +
|
|
offsetof(struct brcmf_assoc_params_le, chanspec_list);
|
|
if (cfg->channel)
|
|
join_params_size += sizeof(u16);
|
|
ext_join_params = kzalloc(sizeof(*ext_join_params), GFP_KERNEL);
|
|
if (ext_join_params == NULL) {
|
|
err = -ENOMEM;
|
|
goto done;
|
|
}
|
|
ssid_len = min_t(u32, sme->ssid_len, IEEE80211_MAX_SSID_LEN);
|
|
ext_join_params->ssid_le.SSID_len = cpu_to_le32(ssid_len);
|
|
memcpy(&ext_join_params->ssid_le.SSID, sme->ssid, ssid_len);
|
|
if (ssid_len < IEEE80211_MAX_SSID_LEN)
|
|
brcmf_dbg(CONN, "SSID \"%s\", len (%d)\n",
|
|
ext_join_params->ssid_le.SSID, ssid_len);
|
|
|
|
/* Set up join scan parameters */
|
|
ext_join_params->scan_le.scan_type = -1;
|
|
ext_join_params->scan_le.home_time = cpu_to_le32(-1);
|
|
|
|
if (sme->bssid)
|
|
memcpy(&ext_join_params->assoc_le.bssid, sme->bssid, ETH_ALEN);
|
|
else
|
|
eth_broadcast_addr(ext_join_params->assoc_le.bssid);
|
|
|
|
if (cfg->channel) {
|
|
ext_join_params->assoc_le.chanspec_num = cpu_to_le32(1);
|
|
|
|
ext_join_params->assoc_le.chanspec_list[0] =
|
|
cpu_to_le16(chanspec);
|
|
/* Increase dwell time to receive probe response or detect
|
|
* beacon from target AP at a noisy air only during connect
|
|
* command.
|
|
*/
|
|
ext_join_params->scan_le.active_time =
|
|
cpu_to_le32(BRCMF_SCAN_JOIN_ACTIVE_DWELL_TIME_MS);
|
|
ext_join_params->scan_le.passive_time =
|
|
cpu_to_le32(BRCMF_SCAN_JOIN_PASSIVE_DWELL_TIME_MS);
|
|
/* To sync with presence period of VSDB GO send probe request
|
|
* more frequently. Probe request will be stopped when it gets
|
|
* probe response from target AP/GO.
|
|
*/
|
|
ext_join_params->scan_le.nprobes =
|
|
cpu_to_le32(BRCMF_SCAN_JOIN_ACTIVE_DWELL_TIME_MS /
|
|
BRCMF_SCAN_JOIN_PROBE_INTERVAL_MS);
|
|
} else {
|
|
ext_join_params->scan_le.active_time = cpu_to_le32(-1);
|
|
ext_join_params->scan_le.passive_time = cpu_to_le32(-1);
|
|
ext_join_params->scan_le.nprobes = cpu_to_le32(-1);
|
|
}
|
|
|
|
brcmf_set_join_pref(ifp, &sme->bss_select);
|
|
|
|
err = brcmf_fil_bsscfg_data_set(ifp, "join", ext_join_params,
|
|
join_params_size);
|
|
kfree(ext_join_params);
|
|
if (!err)
|
|
/* This is it. join command worked, we are done */
|
|
goto done;
|
|
|
|
/* join command failed, fallback to set ssid */
|
|
memset(&join_params, 0, sizeof(join_params));
|
|
join_params_size = sizeof(join_params.ssid_le);
|
|
|
|
memcpy(&join_params.ssid_le.SSID, sme->ssid, ssid_len);
|
|
join_params.ssid_le.SSID_len = cpu_to_le32(ssid_len);
|
|
|
|
if (sme->bssid)
|
|
memcpy(join_params.params_le.bssid, sme->bssid, ETH_ALEN);
|
|
else
|
|
eth_broadcast_addr(join_params.params_le.bssid);
|
|
|
|
if (cfg->channel) {
|
|
join_params.params_le.chanspec_list[0] = cpu_to_le16(chanspec);
|
|
join_params.params_le.chanspec_num = cpu_to_le32(1);
|
|
join_params_size += sizeof(join_params.params_le);
|
|
}
|
|
err = brcmf_fil_cmd_data_set(ifp, BRCMF_C_SET_SSID,
|
|
&join_params, join_params_size);
|
|
if (err)
|
|
bphy_err(drvr, "BRCMF_C_SET_SSID failed (%d)\n", err);
|
|
|
|
done:
|
|
if (err)
|
|
clear_bit(BRCMF_VIF_STATUS_CONNECTING, &ifp->vif->sme_state);
|
|
brcmf_dbg(TRACE, "Exit\n");
|
|
return err;
|
|
}
|
|
|
|
static s32
|
|
brcmf_cfg80211_disconnect(struct wiphy *wiphy, struct net_device *ndev,
|
|
u16 reason_code)
|
|
{
|
|
struct brcmf_cfg80211_info *cfg = wiphy_to_cfg(wiphy);
|
|
struct brcmf_if *ifp = netdev_priv(ndev);
|
|
struct brcmf_cfg80211_profile *profile = &ifp->vif->profile;
|
|
struct brcmf_pub *drvr = cfg->pub;
|
|
struct brcmf_scb_val_le scbval;
|
|
s32 err = 0;
|
|
|
|
brcmf_dbg(TRACE, "Enter. Reason code = %d\n", reason_code);
|
|
if (!check_vif_up(ifp->vif))
|
|
return -EIO;
|
|
|
|
clear_bit(BRCMF_VIF_STATUS_CONNECTED, &ifp->vif->sme_state);
|
|
clear_bit(BRCMF_VIF_STATUS_CONNECTING, &ifp->vif->sme_state);
|
|
cfg80211_disconnected(ndev, reason_code, NULL, 0, true, GFP_KERNEL);
|
|
|
|
memcpy(&scbval.ea, &profile->bssid, ETH_ALEN);
|
|
scbval.val = cpu_to_le32(reason_code);
|
|
err = brcmf_fil_cmd_data_set(ifp, BRCMF_C_DISASSOC,
|
|
&scbval, sizeof(scbval));
|
|
if (err)
|
|
bphy_err(drvr, "error (%d)\n", err);
|
|
|
|
brcmf_dbg(TRACE, "Exit\n");
|
|
return err;
|
|
}
|
|
|
|
static s32
|
|
brcmf_cfg80211_set_tx_power(struct wiphy *wiphy, struct wireless_dev *wdev,
|
|
enum nl80211_tx_power_setting type, s32 mbm)
|
|
{
|
|
struct brcmf_cfg80211_info *cfg = wiphy_to_cfg(wiphy);
|
|
struct net_device *ndev = cfg_to_ndev(cfg);
|
|
struct brcmf_if *ifp = netdev_priv(ndev);
|
|
struct brcmf_pub *drvr = cfg->pub;
|
|
s32 err;
|
|
s32 disable;
|
|
u32 qdbm = 127;
|
|
|
|
brcmf_dbg(TRACE, "Enter %d %d\n", type, mbm);
|
|
if (!check_vif_up(ifp->vif))
|
|
return -EIO;
|
|
|
|
switch (type) {
|
|
case NL80211_TX_POWER_AUTOMATIC:
|
|
break;
|
|
case NL80211_TX_POWER_LIMITED:
|
|
case NL80211_TX_POWER_FIXED:
|
|
if (mbm < 0) {
|
|
bphy_err(drvr, "TX_POWER_FIXED - dbm is negative\n");
|
|
err = -EINVAL;
|
|
goto done;
|
|
}
|
|
qdbm = MBM_TO_DBM(4 * mbm);
|
|
if (qdbm > 127)
|
|
qdbm = 127;
|
|
qdbm |= WL_TXPWR_OVERRIDE;
|
|
break;
|
|
default:
|
|
bphy_err(drvr, "Unsupported type %d\n", type);
|
|
err = -EINVAL;
|
|
goto done;
|
|
}
|
|
/* Make sure radio is off or on as far as software is concerned */
|
|
disable = WL_RADIO_SW_DISABLE << 16;
|
|
err = brcmf_fil_cmd_int_set(ifp, BRCMF_C_SET_RADIO, disable);
|
|
if (err)
|
|
bphy_err(drvr, "WLC_SET_RADIO error (%d)\n", err);
|
|
|
|
err = brcmf_fil_iovar_int_set(ifp, "qtxpower", qdbm);
|
|
if (err)
|
|
bphy_err(drvr, "qtxpower error (%d)\n", err);
|
|
|
|
done:
|
|
brcmf_dbg(TRACE, "Exit %d (qdbm)\n", qdbm & ~WL_TXPWR_OVERRIDE);
|
|
return err;
|
|
}
|
|
|
|
static s32
|
|
brcmf_cfg80211_get_tx_power(struct wiphy *wiphy, struct wireless_dev *wdev,
|
|
s32 *dbm)
|
|
{
|
|
struct brcmf_cfg80211_info *cfg = wiphy_to_cfg(wiphy);
|
|
struct brcmf_cfg80211_vif *vif = wdev_to_vif(wdev);
|
|
struct brcmf_pub *drvr = cfg->pub;
|
|
s32 qdbm = 0;
|
|
s32 err;
|
|
|
|
brcmf_dbg(TRACE, "Enter\n");
|
|
if (!check_vif_up(vif))
|
|
return -EIO;
|
|
|
|
err = brcmf_fil_iovar_int_get(vif->ifp, "qtxpower", &qdbm);
|
|
if (err) {
|
|
bphy_err(drvr, "error (%d)\n", err);
|
|
goto done;
|
|
}
|
|
*dbm = (qdbm & ~WL_TXPWR_OVERRIDE) / 4;
|
|
|
|
done:
|
|
brcmf_dbg(TRACE, "Exit (0x%x %d)\n", qdbm, *dbm);
|
|
return err;
|
|
}
|
|
|
|
static s32
|
|
brcmf_cfg80211_config_default_key(struct wiphy *wiphy, struct net_device *ndev,
|
|
int link_id, u8 key_idx, bool unicast,
|
|
bool multicast)
|
|
{
|
|
struct brcmf_if *ifp = netdev_priv(ndev);
|
|
struct brcmf_pub *drvr = ifp->drvr;
|
|
u32 index;
|
|
u32 wsec;
|
|
s32 err = 0;
|
|
|
|
brcmf_dbg(TRACE, "Enter\n");
|
|
brcmf_dbg(CONN, "key index (%d)\n", key_idx);
|
|
if (!check_vif_up(ifp->vif))
|
|
return -EIO;
|
|
|
|
err = brcmf_fil_bsscfg_int_get(ifp, "wsec", &wsec);
|
|
if (err) {
|
|
bphy_err(drvr, "WLC_GET_WSEC error (%d)\n", err);
|
|
goto done;
|
|
}
|
|
|
|
if (wsec & WEP_ENABLED) {
|
|
/* Just select a new current key */
|
|
index = key_idx;
|
|
err = brcmf_fil_cmd_int_set(ifp,
|
|
BRCMF_C_SET_KEY_PRIMARY, index);
|
|
if (err)
|
|
bphy_err(drvr, "error (%d)\n", err);
|
|
}
|
|
done:
|
|
brcmf_dbg(TRACE, "Exit\n");
|
|
return err;
|
|
}
|
|
|
|
static s32
|
|
brcmf_cfg80211_del_key(struct wiphy *wiphy, struct net_device *ndev,
|
|
int link_id, u8 key_idx, bool pairwise,
|
|
const u8 *mac_addr)
|
|
{
|
|
struct brcmf_if *ifp = netdev_priv(ndev);
|
|
struct brcmf_wsec_key *key;
|
|
s32 err;
|
|
|
|
brcmf_dbg(TRACE, "Enter\n");
|
|
brcmf_dbg(CONN, "key index (%d)\n", key_idx);
|
|
|
|
if (!check_vif_up(ifp->vif))
|
|
return -EIO;
|
|
|
|
if (key_idx >= BRCMF_MAX_DEFAULT_KEYS) {
|
|
/* we ignore this key index in this case */
|
|
return -EINVAL;
|
|
}
|
|
|
|
key = &ifp->vif->profile.key[key_idx];
|
|
|
|
if (key->algo == CRYPTO_ALGO_OFF) {
|
|
brcmf_dbg(CONN, "Ignore clearing of (never configured) key\n");
|
|
return -EINVAL;
|
|
}
|
|
|
|
memset(key, 0, sizeof(*key));
|
|
key->index = (u32)key_idx;
|
|
key->flags = BRCMF_PRIMARY_KEY;
|
|
|
|
/* Clear the key/index */
|
|
err = send_key_to_dongle(ifp, key);
|
|
|
|
brcmf_dbg(TRACE, "Exit\n");
|
|
return err;
|
|
}
|
|
|
|
static s32
|
|
brcmf_cfg80211_add_key(struct wiphy *wiphy, struct net_device *ndev,
|
|
int link_id, u8 key_idx, bool pairwise,
|
|
const u8 *mac_addr, struct key_params *params)
|
|
{
|
|
struct brcmf_cfg80211_info *cfg = wiphy_to_cfg(wiphy);
|
|
struct brcmf_if *ifp = netdev_priv(ndev);
|
|
struct brcmf_pub *drvr = cfg->pub;
|
|
struct brcmf_wsec_key *key;
|
|
s32 val;
|
|
s32 wsec;
|
|
s32 err;
|
|
u8 keybuf[8];
|
|
bool ext_key;
|
|
|
|
brcmf_dbg(TRACE, "Enter\n");
|
|
brcmf_dbg(CONN, "key index (%d)\n", key_idx);
|
|
if (!check_vif_up(ifp->vif))
|
|
return -EIO;
|
|
|
|
if (key_idx >= BRCMF_MAX_DEFAULT_KEYS) {
|
|
/* we ignore this key index in this case */
|
|
bphy_err(drvr, "invalid key index (%d)\n", key_idx);
|
|
return -EINVAL;
|
|
}
|
|
|
|
if (params->key_len == 0)
|
|
return brcmf_cfg80211_del_key(wiphy, ndev, -1, key_idx,
|
|
pairwise, mac_addr);
|
|
|
|
if (params->key_len > sizeof(key->data)) {
|
|
bphy_err(drvr, "Too long key length (%u)\n", params->key_len);
|
|
return -EINVAL;
|
|
}
|
|
|
|
ext_key = false;
|
|
if (mac_addr && (params->cipher != WLAN_CIPHER_SUITE_WEP40) &&
|
|
(params->cipher != WLAN_CIPHER_SUITE_WEP104)) {
|
|
brcmf_dbg(TRACE, "Ext key, mac %pM", mac_addr);
|
|
ext_key = true;
|
|
}
|
|
|
|
key = &ifp->vif->profile.key[key_idx];
|
|
memset(key, 0, sizeof(*key));
|
|
if ((ext_key) && (!is_multicast_ether_addr(mac_addr)))
|
|
memcpy((char *)&key->ea, (void *)mac_addr, ETH_ALEN);
|
|
key->len = params->key_len;
|
|
key->index = key_idx;
|
|
memcpy(key->data, params->key, key->len);
|
|
if (!ext_key)
|
|
key->flags = BRCMF_PRIMARY_KEY;
|
|
|
|
if (params->seq && params->seq_len == 6) {
|
|
/* rx iv */
|
|
u8 *ivptr;
|
|
|
|
ivptr = (u8 *)params->seq;
|
|
key->rxiv.hi = (ivptr[5] << 24) | (ivptr[4] << 16) |
|
|
(ivptr[3] << 8) | ivptr[2];
|
|
key->rxiv.lo = (ivptr[1] << 8) | ivptr[0];
|
|
key->iv_initialized = true;
|
|
}
|
|
|
|
switch (params->cipher) {
|
|
case WLAN_CIPHER_SUITE_WEP40:
|
|
key->algo = CRYPTO_ALGO_WEP1;
|
|
val = WEP_ENABLED;
|
|
brcmf_dbg(CONN, "WLAN_CIPHER_SUITE_WEP40\n");
|
|
break;
|
|
case WLAN_CIPHER_SUITE_WEP104:
|
|
key->algo = CRYPTO_ALGO_WEP128;
|
|
val = WEP_ENABLED;
|
|
brcmf_dbg(CONN, "WLAN_CIPHER_SUITE_WEP104\n");
|
|
break;
|
|
case WLAN_CIPHER_SUITE_TKIP:
|
|
if (!brcmf_is_apmode(ifp->vif)) {
|
|
brcmf_dbg(CONN, "Swapping RX/TX MIC key\n");
|
|
memcpy(keybuf, &key->data[24], sizeof(keybuf));
|
|
memcpy(&key->data[24], &key->data[16], sizeof(keybuf));
|
|
memcpy(&key->data[16], keybuf, sizeof(keybuf));
|
|
}
|
|
key->algo = CRYPTO_ALGO_TKIP;
|
|
val = TKIP_ENABLED;
|
|
brcmf_dbg(CONN, "WLAN_CIPHER_SUITE_TKIP\n");
|
|
break;
|
|
case WLAN_CIPHER_SUITE_AES_CMAC:
|
|
key->algo = CRYPTO_ALGO_AES_CCM;
|
|
val = AES_ENABLED;
|
|
brcmf_dbg(CONN, "WLAN_CIPHER_SUITE_AES_CMAC\n");
|
|
break;
|
|
case WLAN_CIPHER_SUITE_CCMP:
|
|
key->algo = CRYPTO_ALGO_AES_CCM;
|
|
val = AES_ENABLED;
|
|
brcmf_dbg(CONN, "WLAN_CIPHER_SUITE_CCMP\n");
|
|
break;
|
|
default:
|
|
bphy_err(drvr, "Invalid cipher (0x%x)\n", params->cipher);
|
|
err = -EINVAL;
|
|
goto done;
|
|
}
|
|
|
|
err = send_key_to_dongle(ifp, key);
|
|
if (ext_key || err)
|
|
goto done;
|
|
|
|
err = brcmf_fil_bsscfg_int_get(ifp, "wsec", &wsec);
|
|
if (err) {
|
|
bphy_err(drvr, "get wsec error (%d)\n", err);
|
|
goto done;
|
|
}
|
|
wsec |= val;
|
|
err = brcmf_fil_bsscfg_int_set(ifp, "wsec", wsec);
|
|
if (err) {
|
|
bphy_err(drvr, "set wsec error (%d)\n", err);
|
|
goto done;
|
|
}
|
|
|
|
done:
|
|
brcmf_dbg(TRACE, "Exit\n");
|
|
return err;
|
|
}
|
|
|
|
static s32
|
|
brcmf_cfg80211_get_key(struct wiphy *wiphy, struct net_device *ndev,
|
|
int link_id, u8 key_idx, bool pairwise,
|
|
const u8 *mac_addr, void *cookie,
|
|
void (*callback)(void *cookie,
|
|
struct key_params *params))
|
|
{
|
|
struct brcmf_cfg80211_info *cfg = wiphy_to_cfg(wiphy);
|
|
struct key_params params;
|
|
struct brcmf_if *ifp = netdev_priv(ndev);
|
|
struct brcmf_cfg80211_profile *profile = &ifp->vif->profile;
|
|
struct brcmf_pub *drvr = cfg->pub;
|
|
struct brcmf_cfg80211_security *sec;
|
|
s32 wsec;
|
|
s32 err = 0;
|
|
|
|
brcmf_dbg(TRACE, "Enter\n");
|
|
brcmf_dbg(CONN, "key index (%d)\n", key_idx);
|
|
if (!check_vif_up(ifp->vif))
|
|
return -EIO;
|
|
|
|
memset(¶ms, 0, sizeof(params));
|
|
|
|
err = brcmf_fil_bsscfg_int_get(ifp, "wsec", &wsec);
|
|
if (err) {
|
|
bphy_err(drvr, "WLC_GET_WSEC error (%d)\n", err);
|
|
/* Ignore this error, may happen during DISASSOC */
|
|
err = -EAGAIN;
|
|
goto done;
|
|
}
|
|
if (wsec & WEP_ENABLED) {
|
|
sec = &profile->sec;
|
|
if (sec->cipher_pairwise & WLAN_CIPHER_SUITE_WEP40) {
|
|
params.cipher = WLAN_CIPHER_SUITE_WEP40;
|
|
brcmf_dbg(CONN, "WLAN_CIPHER_SUITE_WEP40\n");
|
|
} else if (sec->cipher_pairwise & WLAN_CIPHER_SUITE_WEP104) {
|
|
params.cipher = WLAN_CIPHER_SUITE_WEP104;
|
|
brcmf_dbg(CONN, "WLAN_CIPHER_SUITE_WEP104\n");
|
|
}
|
|
} else if (wsec & TKIP_ENABLED) {
|
|
params.cipher = WLAN_CIPHER_SUITE_TKIP;
|
|
brcmf_dbg(CONN, "WLAN_CIPHER_SUITE_TKIP\n");
|
|
} else if (wsec & AES_ENABLED) {
|
|
params.cipher = WLAN_CIPHER_SUITE_AES_CMAC;
|
|
brcmf_dbg(CONN, "WLAN_CIPHER_SUITE_AES_CMAC\n");
|
|
} else {
|
|
bphy_err(drvr, "Invalid algo (0x%x)\n", wsec);
|
|
err = -EINVAL;
|
|
goto done;
|
|
}
|
|
callback(cookie, ¶ms);
|
|
|
|
done:
|
|
brcmf_dbg(TRACE, "Exit\n");
|
|
return err;
|
|
}
|
|
|
|
static s32
|
|
brcmf_cfg80211_config_default_mgmt_key(struct wiphy *wiphy,
|
|
struct net_device *ndev, int link_id,
|
|
u8 key_idx)
|
|
{
|
|
struct brcmf_if *ifp = netdev_priv(ndev);
|
|
|
|
brcmf_dbg(TRACE, "Enter key_idx %d\n", key_idx);
|
|
|
|
if (brcmf_feat_is_enabled(ifp, BRCMF_FEAT_MFP))
|
|
return 0;
|
|
|
|
brcmf_dbg(INFO, "Not supported\n");
|
|
|
|
return -EOPNOTSUPP;
|
|
}
|
|
|
|
static void
|
|
brcmf_cfg80211_reconfigure_wep(struct brcmf_if *ifp)
|
|
{
|
|
struct brcmf_pub *drvr = ifp->drvr;
|
|
s32 err;
|
|
u8 key_idx;
|
|
struct brcmf_wsec_key *key;
|
|
s32 wsec;
|
|
|
|
for (key_idx = 0; key_idx < BRCMF_MAX_DEFAULT_KEYS; key_idx++) {
|
|
key = &ifp->vif->profile.key[key_idx];
|
|
if ((key->algo == CRYPTO_ALGO_WEP1) ||
|
|
(key->algo == CRYPTO_ALGO_WEP128))
|
|
break;
|
|
}
|
|
if (key_idx == BRCMF_MAX_DEFAULT_KEYS)
|
|
return;
|
|
|
|
err = send_key_to_dongle(ifp, key);
|
|
if (err) {
|
|
bphy_err(drvr, "Setting WEP key failed (%d)\n", err);
|
|
return;
|
|
}
|
|
err = brcmf_fil_bsscfg_int_get(ifp, "wsec", &wsec);
|
|
if (err) {
|
|
bphy_err(drvr, "get wsec error (%d)\n", err);
|
|
return;
|
|
}
|
|
wsec |= WEP_ENABLED;
|
|
err = brcmf_fil_bsscfg_int_set(ifp, "wsec", wsec);
|
|
if (err)
|
|
bphy_err(drvr, "set wsec error (%d)\n", err);
|
|
}
|
|
|
|
static void brcmf_convert_sta_flags(u32 fw_sta_flags, struct station_info *si)
|
|
{
|
|
struct nl80211_sta_flag_update *sfu;
|
|
|
|
brcmf_dbg(TRACE, "flags %08x\n", fw_sta_flags);
|
|
si->filled |= BIT_ULL(NL80211_STA_INFO_STA_FLAGS);
|
|
sfu = &si->sta_flags;
|
|
sfu->mask = BIT(NL80211_STA_FLAG_WME) |
|
|
BIT(NL80211_STA_FLAG_AUTHENTICATED) |
|
|
BIT(NL80211_STA_FLAG_ASSOCIATED) |
|
|
BIT(NL80211_STA_FLAG_AUTHORIZED);
|
|
if (fw_sta_flags & BRCMF_STA_WME)
|
|
sfu->set |= BIT(NL80211_STA_FLAG_WME);
|
|
if (fw_sta_flags & BRCMF_STA_AUTHE)
|
|
sfu->set |= BIT(NL80211_STA_FLAG_AUTHENTICATED);
|
|
if (fw_sta_flags & BRCMF_STA_ASSOC)
|
|
sfu->set |= BIT(NL80211_STA_FLAG_ASSOCIATED);
|
|
if (fw_sta_flags & BRCMF_STA_AUTHO)
|
|
sfu->set |= BIT(NL80211_STA_FLAG_AUTHORIZED);
|
|
}
|
|
|
|
static void brcmf_fill_bss_param(struct brcmf_if *ifp, struct station_info *si)
|
|
{
|
|
struct brcmf_pub *drvr = ifp->drvr;
|
|
struct {
|
|
__le32 len;
|
|
struct brcmf_bss_info_le bss_le;
|
|
} *buf;
|
|
u16 capability;
|
|
int err;
|
|
|
|
buf = kzalloc(WL_BSS_INFO_MAX, GFP_KERNEL);
|
|
if (!buf)
|
|
return;
|
|
|
|
buf->len = cpu_to_le32(WL_BSS_INFO_MAX);
|
|
err = brcmf_fil_cmd_data_get(ifp, BRCMF_C_GET_BSS_INFO, buf,
|
|
WL_BSS_INFO_MAX);
|
|
if (err) {
|
|
bphy_err(drvr, "Failed to get bss info (%d)\n", err);
|
|
goto out_kfree;
|
|
}
|
|
si->filled |= BIT_ULL(NL80211_STA_INFO_BSS_PARAM);
|
|
si->bss_param.beacon_interval = le16_to_cpu(buf->bss_le.beacon_period);
|
|
si->bss_param.dtim_period = buf->bss_le.dtim_period;
|
|
capability = le16_to_cpu(buf->bss_le.capability);
|
|
if (capability & IEEE80211_HT_STBC_PARAM_DUAL_CTS_PROT)
|
|
si->bss_param.flags |= BSS_PARAM_FLAGS_CTS_PROT;
|
|
if (capability & WLAN_CAPABILITY_SHORT_PREAMBLE)
|
|
si->bss_param.flags |= BSS_PARAM_FLAGS_SHORT_PREAMBLE;
|
|
if (capability & WLAN_CAPABILITY_SHORT_SLOT_TIME)
|
|
si->bss_param.flags |= BSS_PARAM_FLAGS_SHORT_SLOT_TIME;
|
|
|
|
out_kfree:
|
|
kfree(buf);
|
|
}
|
|
|
|
static s32
|
|
brcmf_cfg80211_get_station_ibss(struct brcmf_if *ifp,
|
|
struct station_info *sinfo)
|
|
{
|
|
struct brcmf_pub *drvr = ifp->drvr;
|
|
struct brcmf_scb_val_le scbval;
|
|
struct brcmf_pktcnt_le pktcnt;
|
|
s32 err;
|
|
u32 rate;
|
|
u32 rssi;
|
|
|
|
/* Get the current tx rate */
|
|
err = brcmf_fil_cmd_int_get(ifp, BRCMF_C_GET_RATE, &rate);
|
|
if (err < 0) {
|
|
bphy_err(drvr, "BRCMF_C_GET_RATE error (%d)\n", err);
|
|
return err;
|
|
}
|
|
sinfo->filled |= BIT_ULL(NL80211_STA_INFO_TX_BITRATE);
|
|
sinfo->txrate.legacy = rate * 5;
|
|
|
|
memset(&scbval, 0, sizeof(scbval));
|
|
err = brcmf_fil_cmd_data_get(ifp, BRCMF_C_GET_RSSI, &scbval,
|
|
sizeof(scbval));
|
|
if (err) {
|
|
bphy_err(drvr, "BRCMF_C_GET_RSSI error (%d)\n", err);
|
|
return err;
|
|
}
|
|
rssi = le32_to_cpu(scbval.val);
|
|
sinfo->filled |= BIT_ULL(NL80211_STA_INFO_SIGNAL);
|
|
sinfo->signal = rssi;
|
|
|
|
err = brcmf_fil_cmd_data_get(ifp, BRCMF_C_GET_GET_PKTCNTS, &pktcnt,
|
|
sizeof(pktcnt));
|
|
if (err) {
|
|
bphy_err(drvr, "BRCMF_C_GET_GET_PKTCNTS error (%d)\n", err);
|
|
return err;
|
|
}
|
|
sinfo->filled |= BIT_ULL(NL80211_STA_INFO_RX_PACKETS) |
|
|
BIT_ULL(NL80211_STA_INFO_RX_DROP_MISC) |
|
|
BIT_ULL(NL80211_STA_INFO_TX_PACKETS) |
|
|
BIT_ULL(NL80211_STA_INFO_TX_FAILED);
|
|
sinfo->rx_packets = le32_to_cpu(pktcnt.rx_good_pkt);
|
|
sinfo->rx_dropped_misc = le32_to_cpu(pktcnt.rx_bad_pkt);
|
|
sinfo->tx_packets = le32_to_cpu(pktcnt.tx_good_pkt);
|
|
sinfo->tx_failed = le32_to_cpu(pktcnt.tx_bad_pkt);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static s32
|
|
brcmf_cfg80211_get_station(struct wiphy *wiphy, struct net_device *ndev,
|
|
const u8 *mac, struct station_info *sinfo)
|
|
{
|
|
struct brcmf_cfg80211_info *cfg = wiphy_to_cfg(wiphy);
|
|
struct brcmf_if *ifp = netdev_priv(ndev);
|
|
struct brcmf_pub *drvr = cfg->pub;
|
|
struct brcmf_scb_val_le scb_val;
|
|
s32 err = 0;
|
|
struct brcmf_sta_info_le sta_info_le;
|
|
u32 sta_flags;
|
|
u32 is_tdls_peer;
|
|
s32 total_rssi_avg = 0;
|
|
s32 total_rssi = 0;
|
|
s32 count_rssi = 0;
|
|
int rssi;
|
|
u32 i;
|
|
|
|
brcmf_dbg(TRACE, "Enter, MAC %pM\n", mac);
|
|
if (!check_vif_up(ifp->vif))
|
|
return -EIO;
|
|
|
|
if (brcmf_is_ibssmode(ifp->vif))
|
|
return brcmf_cfg80211_get_station_ibss(ifp, sinfo);
|
|
|
|
memset(&sta_info_le, 0, sizeof(sta_info_le));
|
|
memcpy(&sta_info_le, mac, ETH_ALEN);
|
|
err = brcmf_fil_iovar_data_get(ifp, "tdls_sta_info",
|
|
&sta_info_le,
|
|
sizeof(sta_info_le));
|
|
is_tdls_peer = !err;
|
|
if (err) {
|
|
err = brcmf_fil_iovar_data_get(ifp, "sta_info",
|
|
&sta_info_le,
|
|
sizeof(sta_info_le));
|
|
if (err < 0) {
|
|
bphy_err(drvr, "GET STA INFO failed, %d\n", err);
|
|
goto done;
|
|
}
|
|
}
|
|
brcmf_dbg(TRACE, "version %d\n", le16_to_cpu(sta_info_le.ver));
|
|
sinfo->filled = BIT_ULL(NL80211_STA_INFO_INACTIVE_TIME);
|
|
sinfo->inactive_time = le32_to_cpu(sta_info_le.idle) * 1000;
|
|
sta_flags = le32_to_cpu(sta_info_le.flags);
|
|
brcmf_convert_sta_flags(sta_flags, sinfo);
|
|
sinfo->sta_flags.mask |= BIT(NL80211_STA_FLAG_TDLS_PEER);
|
|
if (is_tdls_peer)
|
|
sinfo->sta_flags.set |= BIT(NL80211_STA_FLAG_TDLS_PEER);
|
|
else
|
|
sinfo->sta_flags.set &= ~BIT(NL80211_STA_FLAG_TDLS_PEER);
|
|
if (sta_flags & BRCMF_STA_ASSOC) {
|
|
sinfo->filled |= BIT_ULL(NL80211_STA_INFO_CONNECTED_TIME);
|
|
sinfo->connected_time = le32_to_cpu(sta_info_le.in);
|
|
brcmf_fill_bss_param(ifp, sinfo);
|
|
}
|
|
if (sta_flags & BRCMF_STA_SCBSTATS) {
|
|
sinfo->filled |= BIT_ULL(NL80211_STA_INFO_TX_FAILED);
|
|
sinfo->tx_failed = le32_to_cpu(sta_info_le.tx_failures);
|
|
sinfo->filled |= BIT_ULL(NL80211_STA_INFO_TX_PACKETS);
|
|
sinfo->tx_packets = le32_to_cpu(sta_info_le.tx_pkts);
|
|
sinfo->tx_packets += le32_to_cpu(sta_info_le.tx_mcast_pkts);
|
|
sinfo->filled |= BIT_ULL(NL80211_STA_INFO_RX_PACKETS);
|
|
sinfo->rx_packets = le32_to_cpu(sta_info_le.rx_ucast_pkts);
|
|
sinfo->rx_packets += le32_to_cpu(sta_info_le.rx_mcast_pkts);
|
|
if (sinfo->tx_packets) {
|
|
sinfo->filled |= BIT_ULL(NL80211_STA_INFO_TX_BITRATE);
|
|
sinfo->txrate.legacy =
|
|
le32_to_cpu(sta_info_le.tx_rate) / 100;
|
|
}
|
|
if (sinfo->rx_packets) {
|
|
sinfo->filled |= BIT_ULL(NL80211_STA_INFO_RX_BITRATE);
|
|
sinfo->rxrate.legacy =
|
|
le32_to_cpu(sta_info_le.rx_rate) / 100;
|
|
}
|
|
if (le16_to_cpu(sta_info_le.ver) >= 4) {
|
|
sinfo->filled |= BIT_ULL(NL80211_STA_INFO_TX_BYTES);
|
|
sinfo->tx_bytes = le64_to_cpu(sta_info_le.tx_tot_bytes);
|
|
sinfo->filled |= BIT_ULL(NL80211_STA_INFO_RX_BYTES);
|
|
sinfo->rx_bytes = le64_to_cpu(sta_info_le.rx_tot_bytes);
|
|
}
|
|
for (i = 0; i < BRCMF_ANT_MAX; i++) {
|
|
if (sta_info_le.rssi[i] == 0 ||
|
|
sta_info_le.rx_lastpkt_rssi[i] == 0)
|
|
continue;
|
|
sinfo->chains |= BIT(count_rssi);
|
|
sinfo->chain_signal[count_rssi] =
|
|
sta_info_le.rx_lastpkt_rssi[i];
|
|
sinfo->chain_signal_avg[count_rssi] =
|
|
sta_info_le.rssi[i];
|
|
total_rssi += sta_info_le.rx_lastpkt_rssi[i];
|
|
total_rssi_avg += sta_info_le.rssi[i];
|
|
count_rssi++;
|
|
}
|
|
if (count_rssi) {
|
|
sinfo->filled |= BIT_ULL(NL80211_STA_INFO_SIGNAL);
|
|
sinfo->filled |= BIT_ULL(NL80211_STA_INFO_SIGNAL_AVG);
|
|
sinfo->filled |= BIT_ULL(NL80211_STA_INFO_CHAIN_SIGNAL);
|
|
sinfo->filled |=
|
|
BIT_ULL(NL80211_STA_INFO_CHAIN_SIGNAL_AVG);
|
|
sinfo->signal = total_rssi / count_rssi;
|
|
sinfo->signal_avg = total_rssi_avg / count_rssi;
|
|
} else if (test_bit(BRCMF_VIF_STATUS_CONNECTED,
|
|
&ifp->vif->sme_state)) {
|
|
memset(&scb_val, 0, sizeof(scb_val));
|
|
err = brcmf_fil_cmd_data_get(ifp, BRCMF_C_GET_RSSI,
|
|
&scb_val, sizeof(scb_val));
|
|
if (err) {
|
|
bphy_err(drvr, "Could not get rssi (%d)\n",
|
|
err);
|
|
goto done;
|
|
} else {
|
|
rssi = le32_to_cpu(scb_val.val);
|
|
sinfo->filled |= BIT_ULL(NL80211_STA_INFO_SIGNAL);
|
|
sinfo->signal = rssi;
|
|
brcmf_dbg(CONN, "RSSI %d dBm\n", rssi);
|
|
}
|
|
}
|
|
}
|
|
done:
|
|
brcmf_dbg(TRACE, "Exit\n");
|
|
return err;
|
|
}
|
|
|
|
static int
|
|
brcmf_cfg80211_dump_station(struct wiphy *wiphy, struct net_device *ndev,
|
|
int idx, u8 *mac, struct station_info *sinfo)
|
|
{
|
|
struct brcmf_cfg80211_info *cfg = wiphy_to_cfg(wiphy);
|
|
struct brcmf_if *ifp = netdev_priv(ndev);
|
|
struct brcmf_pub *drvr = cfg->pub;
|
|
s32 err;
|
|
|
|
brcmf_dbg(TRACE, "Enter, idx %d\n", idx);
|
|
|
|
if (idx == 0) {
|
|
cfg->assoclist.count = cpu_to_le32(BRCMF_MAX_ASSOCLIST);
|
|
err = brcmf_fil_cmd_data_get(ifp, BRCMF_C_GET_ASSOCLIST,
|
|
&cfg->assoclist,
|
|
sizeof(cfg->assoclist));
|
|
if (err) {
|
|
/* GET_ASSOCLIST unsupported by firmware of older chips */
|
|
if (err == -EBADE)
|
|
bphy_info_once(drvr, "BRCMF_C_GET_ASSOCLIST unsupported\n");
|
|
else
|
|
bphy_err(drvr, "BRCMF_C_GET_ASSOCLIST failed, err=%d\n",
|
|
err);
|
|
|
|
cfg->assoclist.count = 0;
|
|
return -EOPNOTSUPP;
|
|
}
|
|
}
|
|
if (idx < le32_to_cpu(cfg->assoclist.count)) {
|
|
memcpy(mac, cfg->assoclist.mac[idx], ETH_ALEN);
|
|
return brcmf_cfg80211_get_station(wiphy, ndev, mac, sinfo);
|
|
}
|
|
return -ENOENT;
|
|
}
|
|
|
|
static s32
|
|
brcmf_cfg80211_set_power_mgmt(struct wiphy *wiphy, struct net_device *ndev,
|
|
bool enabled, s32 timeout)
|
|
{
|
|
s32 pm;
|
|
s32 err = 0;
|
|
struct brcmf_cfg80211_info *cfg = wiphy_to_cfg(wiphy);
|
|
struct brcmf_if *ifp = netdev_priv(ndev);
|
|
struct brcmf_pub *drvr = cfg->pub;
|
|
|
|
brcmf_dbg(TRACE, "Enter\n");
|
|
|
|
/*
|
|
* Powersave enable/disable request is coming from the
|
|
* cfg80211 even before the interface is up. In that
|
|
* scenario, driver will be storing the power save
|
|
* preference in cfg struct to apply this to
|
|
* FW later while initializing the dongle
|
|
*/
|
|
cfg->pwr_save = enabled;
|
|
if (!check_vif_up(ifp->vif)) {
|
|
|
|
brcmf_dbg(INFO, "Device is not ready, storing the value in cfg_info struct\n");
|
|
goto done;
|
|
}
|
|
|
|
pm = enabled ? PM_FAST : PM_OFF;
|
|
/* Do not enable the power save after assoc if it is a p2p interface */
|
|
if (ifp->vif->wdev.iftype == NL80211_IFTYPE_P2P_CLIENT) {
|
|
brcmf_dbg(INFO, "Do not enable power save for P2P clients\n");
|
|
pm = PM_OFF;
|
|
}
|
|
brcmf_dbg(INFO, "power save %s\n", (pm ? "enabled" : "disabled"));
|
|
|
|
err = brcmf_fil_cmd_int_set(ifp, BRCMF_C_SET_PM, pm);
|
|
if (err) {
|
|
if (err == -ENODEV)
|
|
bphy_err(drvr, "net_device is not ready yet\n");
|
|
else
|
|
bphy_err(drvr, "error (%d)\n", err);
|
|
}
|
|
|
|
err = brcmf_fil_iovar_int_set(ifp, "pm2_sleep_ret",
|
|
min_t(u32, timeout, BRCMF_PS_MAX_TIMEOUT_MS));
|
|
if (err)
|
|
bphy_err(drvr, "Unable to set pm timeout, (%d)\n", err);
|
|
|
|
done:
|
|
brcmf_dbg(TRACE, "Exit\n");
|
|
return err;
|
|
}
|
|
|
|
static s32 brcmf_inform_single_bss(struct brcmf_cfg80211_info *cfg,
|
|
struct brcmf_bss_info_le *bi)
|
|
{
|
|
struct wiphy *wiphy = cfg_to_wiphy(cfg);
|
|
struct brcmf_pub *drvr = cfg->pub;
|
|
struct cfg80211_bss *bss;
|
|
enum nl80211_band band;
|
|
struct brcmu_chan ch;
|
|
u16 channel;
|
|
u32 freq;
|
|
u16 notify_capability;
|
|
u16 notify_interval;
|
|
u8 *notify_ie;
|
|
size_t notify_ielen;
|
|
struct cfg80211_inform_bss bss_data = {};
|
|
|
|
if (le32_to_cpu(bi->length) > WL_BSS_INFO_MAX) {
|
|
bphy_err(drvr, "Bss info is larger than buffer. Discarding\n");
|
|
return -EINVAL;
|
|
}
|
|
|
|
if (!bi->ctl_ch) {
|
|
ch.chspec = le16_to_cpu(bi->chanspec);
|
|
cfg->d11inf.decchspec(&ch);
|
|
bi->ctl_ch = ch.control_ch_num;
|
|
}
|
|
channel = bi->ctl_ch;
|
|
|
|
if (channel <= CH_MAX_2G_CHANNEL)
|
|
band = NL80211_BAND_2GHZ;
|
|
else
|
|
band = NL80211_BAND_5GHZ;
|
|
|
|
freq = ieee80211_channel_to_frequency(channel, band);
|
|
bss_data.chan = ieee80211_get_channel(wiphy, freq);
|
|
bss_data.scan_width = NL80211_BSS_CHAN_WIDTH_20;
|
|
bss_data.boottime_ns = ktime_to_ns(ktime_get_boottime());
|
|
|
|
notify_capability = le16_to_cpu(bi->capability);
|
|
notify_interval = le16_to_cpu(bi->beacon_period);
|
|
notify_ie = (u8 *)bi + le16_to_cpu(bi->ie_offset);
|
|
notify_ielen = le32_to_cpu(bi->ie_length);
|
|
bss_data.signal = (s16)le16_to_cpu(bi->RSSI) * 100;
|
|
|
|
brcmf_dbg(CONN, "bssid: %pM\n", bi->BSSID);
|
|
brcmf_dbg(CONN, "Channel: %d(%d)\n", channel, freq);
|
|
brcmf_dbg(CONN, "Capability: %X\n", notify_capability);
|
|
brcmf_dbg(CONN, "Beacon interval: %d\n", notify_interval);
|
|
brcmf_dbg(CONN, "Signal: %d\n", bss_data.signal);
|
|
|
|
bss = cfg80211_inform_bss_data(wiphy, &bss_data,
|
|
CFG80211_BSS_FTYPE_UNKNOWN,
|
|
(const u8 *)bi->BSSID,
|
|
0, notify_capability,
|
|
notify_interval, notify_ie,
|
|
notify_ielen, GFP_KERNEL);
|
|
|
|
if (!bss)
|
|
return -ENOMEM;
|
|
|
|
cfg80211_put_bss(wiphy, bss);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static struct brcmf_bss_info_le *
|
|
next_bss_le(struct brcmf_scan_results *list, struct brcmf_bss_info_le *bss)
|
|
{
|
|
if (bss == NULL)
|
|
return list->bss_info_le;
|
|
return (struct brcmf_bss_info_le *)((unsigned long)bss +
|
|
le32_to_cpu(bss->length));
|
|
}
|
|
|
|
static s32 brcmf_inform_bss(struct brcmf_cfg80211_info *cfg)
|
|
{
|
|
struct brcmf_pub *drvr = cfg->pub;
|
|
struct brcmf_scan_results *bss_list;
|
|
struct brcmf_bss_info_le *bi = NULL; /* must be initialized */
|
|
s32 err = 0;
|
|
int i;
|
|
|
|
bss_list = (struct brcmf_scan_results *)cfg->escan_info.escan_buf;
|
|
if (bss_list->count != 0 &&
|
|
bss_list->version != BRCMF_BSS_INFO_VERSION) {
|
|
bphy_err(drvr, "Version %d != WL_BSS_INFO_VERSION\n",
|
|
bss_list->version);
|
|
return -EOPNOTSUPP;
|
|
}
|
|
brcmf_dbg(SCAN, "scanned AP count (%d)\n", bss_list->count);
|
|
for (i = 0; i < bss_list->count; i++) {
|
|
bi = next_bss_le(bss_list, bi);
|
|
err = brcmf_inform_single_bss(cfg, bi);
|
|
if (err)
|
|
break;
|
|
}
|
|
return err;
|
|
}
|
|
|
|
static s32 brcmf_inform_ibss(struct brcmf_cfg80211_info *cfg,
|
|
struct net_device *ndev, const u8 *bssid)
|
|
{
|
|
struct wiphy *wiphy = cfg_to_wiphy(cfg);
|
|
struct brcmf_pub *drvr = cfg->pub;
|
|
struct ieee80211_channel *notify_channel;
|
|
struct brcmf_bss_info_le *bi = NULL;
|
|
struct ieee80211_supported_band *band;
|
|
struct cfg80211_bss *bss;
|
|
struct brcmu_chan ch;
|
|
u8 *buf = NULL;
|
|
s32 err = 0;
|
|
u32 freq;
|
|
u16 notify_capability;
|
|
u16 notify_interval;
|
|
u8 *notify_ie;
|
|
size_t notify_ielen;
|
|
s32 notify_signal;
|
|
|
|
brcmf_dbg(TRACE, "Enter\n");
|
|
|
|
buf = kzalloc(WL_BSS_INFO_MAX, GFP_KERNEL);
|
|
if (buf == NULL) {
|
|
err = -ENOMEM;
|
|
goto CleanUp;
|
|
}
|
|
|
|
*(__le32 *)buf = cpu_to_le32(WL_BSS_INFO_MAX);
|
|
|
|
err = brcmf_fil_cmd_data_get(netdev_priv(ndev), BRCMF_C_GET_BSS_INFO,
|
|
buf, WL_BSS_INFO_MAX);
|
|
if (err) {
|
|
bphy_err(drvr, "WLC_GET_BSS_INFO failed: %d\n", err);
|
|
goto CleanUp;
|
|
}
|
|
|
|
bi = (struct brcmf_bss_info_le *)(buf + 4);
|
|
|
|
ch.chspec = le16_to_cpu(bi->chanspec);
|
|
cfg->d11inf.decchspec(&ch);
|
|
|
|
if (ch.band == BRCMU_CHAN_BAND_2G)
|
|
band = wiphy->bands[NL80211_BAND_2GHZ];
|
|
else
|
|
band = wiphy->bands[NL80211_BAND_5GHZ];
|
|
|
|
freq = ieee80211_channel_to_frequency(ch.control_ch_num, band->band);
|
|
cfg->channel = freq;
|
|
notify_channel = ieee80211_get_channel(wiphy, freq);
|
|
|
|
notify_capability = le16_to_cpu(bi->capability);
|
|
notify_interval = le16_to_cpu(bi->beacon_period);
|
|
notify_ie = (u8 *)bi + le16_to_cpu(bi->ie_offset);
|
|
notify_ielen = le32_to_cpu(bi->ie_length);
|
|
notify_signal = (s16)le16_to_cpu(bi->RSSI) * 100;
|
|
|
|
brcmf_dbg(CONN, "channel: %d(%d)\n", ch.control_ch_num, freq);
|
|
brcmf_dbg(CONN, "capability: %X\n", notify_capability);
|
|
brcmf_dbg(CONN, "beacon interval: %d\n", notify_interval);
|
|
brcmf_dbg(CONN, "signal: %d\n", notify_signal);
|
|
|
|
bss = cfg80211_inform_bss(wiphy, notify_channel,
|
|
CFG80211_BSS_FTYPE_UNKNOWN, bssid, 0,
|
|
notify_capability, notify_interval,
|
|
notify_ie, notify_ielen, notify_signal,
|
|
GFP_KERNEL);
|
|
|
|
if (!bss) {
|
|
err = -ENOMEM;
|
|
goto CleanUp;
|
|
}
|
|
|
|
cfg80211_put_bss(wiphy, bss);
|
|
|
|
CleanUp:
|
|
|
|
kfree(buf);
|
|
|
|
brcmf_dbg(TRACE, "Exit\n");
|
|
|
|
return err;
|
|
}
|
|
|
|
static s32 brcmf_update_bss_info(struct brcmf_cfg80211_info *cfg,
|
|
struct brcmf_if *ifp)
|
|
{
|
|
struct brcmf_pub *drvr = cfg->pub;
|
|
struct brcmf_bss_info_le *bi = NULL;
|
|
s32 err = 0;
|
|
|
|
brcmf_dbg(TRACE, "Enter\n");
|
|
if (brcmf_is_ibssmode(ifp->vif))
|
|
return err;
|
|
|
|
*(__le32 *)cfg->extra_buf = cpu_to_le32(WL_EXTRA_BUF_MAX);
|
|
err = brcmf_fil_cmd_data_get(ifp, BRCMF_C_GET_BSS_INFO,
|
|
cfg->extra_buf, WL_EXTRA_BUF_MAX);
|
|
if (err) {
|
|
bphy_err(drvr, "Could not get bss info %d\n", err);
|
|
goto update_bss_info_out;
|
|
}
|
|
bi = (struct brcmf_bss_info_le *)(cfg->extra_buf + 4);
|
|
err = brcmf_inform_single_bss(cfg, bi);
|
|
|
|
update_bss_info_out:
|
|
brcmf_dbg(TRACE, "Exit");
|
|
return err;
|
|
}
|
|
|
|
void brcmf_abort_scanning(struct brcmf_cfg80211_info *cfg)
|
|
{
|
|
struct escan_info *escan = &cfg->escan_info;
|
|
|
|
set_bit(BRCMF_SCAN_STATUS_ABORT, &cfg->scan_status);
|
|
if (cfg->int_escan_map || cfg->scan_request) {
|
|
escan->escan_state = WL_ESCAN_STATE_IDLE;
|
|
brcmf_notify_escan_complete(cfg, escan->ifp, true, true);
|
|
}
|
|
clear_bit(BRCMF_SCAN_STATUS_BUSY, &cfg->scan_status);
|
|
clear_bit(BRCMF_SCAN_STATUS_ABORT, &cfg->scan_status);
|
|
}
|
|
|
|
static void brcmf_cfg80211_escan_timeout_worker(struct work_struct *work)
|
|
{
|
|
struct brcmf_cfg80211_info *cfg =
|
|
container_of(work, struct brcmf_cfg80211_info,
|
|
escan_timeout_work);
|
|
|
|
brcmf_inform_bss(cfg);
|
|
brcmf_notify_escan_complete(cfg, cfg->escan_info.ifp, true, true);
|
|
}
|
|
|
|
static void brcmf_escan_timeout(struct timer_list *t)
|
|
{
|
|
struct brcmf_cfg80211_info *cfg =
|
|
from_timer(cfg, t, escan_timeout);
|
|
struct brcmf_pub *drvr = cfg->pub;
|
|
|
|
if (cfg->int_escan_map || cfg->scan_request) {
|
|
bphy_err(drvr, "timer expired\n");
|
|
schedule_work(&cfg->escan_timeout_work);
|
|
}
|
|
}
|
|
|
|
static s32
|
|
brcmf_compare_update_same_bss(struct brcmf_cfg80211_info *cfg,
|
|
struct brcmf_bss_info_le *bss,
|
|
struct brcmf_bss_info_le *bss_info_le)
|
|
{
|
|
struct brcmu_chan ch_bss, ch_bss_info_le;
|
|
|
|
ch_bss.chspec = le16_to_cpu(bss->chanspec);
|
|
cfg->d11inf.decchspec(&ch_bss);
|
|
ch_bss_info_le.chspec = le16_to_cpu(bss_info_le->chanspec);
|
|
cfg->d11inf.decchspec(&ch_bss_info_le);
|
|
|
|
if (!memcmp(&bss_info_le->BSSID, &bss->BSSID, ETH_ALEN) &&
|
|
ch_bss.band == ch_bss_info_le.band &&
|
|
bss_info_le->SSID_len == bss->SSID_len &&
|
|
!memcmp(bss_info_le->SSID, bss->SSID, bss_info_le->SSID_len)) {
|
|
if ((bss->flags & BRCMF_BSS_RSSI_ON_CHANNEL) ==
|
|
(bss_info_le->flags & BRCMF_BSS_RSSI_ON_CHANNEL)) {
|
|
s16 bss_rssi = le16_to_cpu(bss->RSSI);
|
|
s16 bss_info_rssi = le16_to_cpu(bss_info_le->RSSI);
|
|
|
|
/* preserve max RSSI if the measurements are
|
|
* both on-channel or both off-channel
|
|
*/
|
|
if (bss_info_rssi > bss_rssi)
|
|
bss->RSSI = bss_info_le->RSSI;
|
|
} else if ((bss->flags & BRCMF_BSS_RSSI_ON_CHANNEL) &&
|
|
(bss_info_le->flags & BRCMF_BSS_RSSI_ON_CHANNEL) == 0) {
|
|
/* preserve the on-channel rssi measurement
|
|
* if the new measurement is off channel
|
|
*/
|
|
bss->RSSI = bss_info_le->RSSI;
|
|
bss->flags |= BRCMF_BSS_RSSI_ON_CHANNEL;
|
|
}
|
|
return 1;
|
|
}
|
|
return 0;
|
|
}
|
|
|
|
static s32
|
|
brcmf_cfg80211_escan_handler(struct brcmf_if *ifp,
|
|
const struct brcmf_event_msg *e, void *data)
|
|
{
|
|
struct brcmf_pub *drvr = ifp->drvr;
|
|
struct brcmf_cfg80211_info *cfg = drvr->config;
|
|
s32 status;
|
|
struct brcmf_escan_result_le *escan_result_le;
|
|
u32 escan_buflen;
|
|
struct brcmf_bss_info_le *bss_info_le;
|
|
struct brcmf_bss_info_le *bss = NULL;
|
|
u32 bi_length;
|
|
struct brcmf_scan_results *list;
|
|
u32 i;
|
|
bool aborted;
|
|
|
|
status = e->status;
|
|
|
|
if (status == BRCMF_E_STATUS_ABORT)
|
|
goto exit;
|
|
|
|
if (!test_bit(BRCMF_SCAN_STATUS_BUSY, &cfg->scan_status)) {
|
|
bphy_err(drvr, "scan not ready, bsscfgidx=%d\n",
|
|
ifp->bsscfgidx);
|
|
return -EPERM;
|
|
}
|
|
|
|
if (status == BRCMF_E_STATUS_PARTIAL) {
|
|
brcmf_dbg(SCAN, "ESCAN Partial result\n");
|
|
if (e->datalen < sizeof(*escan_result_le)) {
|
|
bphy_err(drvr, "invalid event data length\n");
|
|
goto exit;
|
|
}
|
|
escan_result_le = (struct brcmf_escan_result_le *) data;
|
|
if (!escan_result_le) {
|
|
bphy_err(drvr, "Invalid escan result (NULL pointer)\n");
|
|
goto exit;
|
|
}
|
|
escan_buflen = le32_to_cpu(escan_result_le->buflen);
|
|
if (escan_buflen > BRCMF_ESCAN_BUF_SIZE ||
|
|
escan_buflen > e->datalen ||
|
|
escan_buflen < sizeof(*escan_result_le)) {
|
|
bphy_err(drvr, "Invalid escan buffer length: %d\n",
|
|
escan_buflen);
|
|
goto exit;
|
|
}
|
|
if (le16_to_cpu(escan_result_le->bss_count) != 1) {
|
|
bphy_err(drvr, "Invalid bss_count %d: ignoring\n",
|
|
escan_result_le->bss_count);
|
|
goto exit;
|
|
}
|
|
bss_info_le = &escan_result_le->bss_info_le;
|
|
|
|
if (brcmf_p2p_scan_finding_common_channel(cfg, bss_info_le))
|
|
goto exit;
|
|
|
|
if (!cfg->int_escan_map && !cfg->scan_request) {
|
|
brcmf_dbg(SCAN, "result without cfg80211 request\n");
|
|
goto exit;
|
|
}
|
|
|
|
bi_length = le32_to_cpu(bss_info_le->length);
|
|
if (bi_length != escan_buflen - WL_ESCAN_RESULTS_FIXED_SIZE) {
|
|
bphy_err(drvr, "Ignoring invalid bss_info length: %d\n",
|
|
bi_length);
|
|
goto exit;
|
|
}
|
|
|
|
if (!(cfg_to_wiphy(cfg)->interface_modes &
|
|
BIT(NL80211_IFTYPE_ADHOC))) {
|
|
if (le16_to_cpu(bss_info_le->capability) &
|
|
WLAN_CAPABILITY_IBSS) {
|
|
bphy_err(drvr, "Ignoring IBSS result\n");
|
|
goto exit;
|
|
}
|
|
}
|
|
|
|
list = (struct brcmf_scan_results *)
|
|
cfg->escan_info.escan_buf;
|
|
if (bi_length > BRCMF_ESCAN_BUF_SIZE - list->buflen) {
|
|
bphy_err(drvr, "Buffer is too small: ignoring\n");
|
|
goto exit;
|
|
}
|
|
|
|
for (i = 0; i < list->count; i++) {
|
|
bss = bss ? (struct brcmf_bss_info_le *)
|
|
((unsigned char *)bss +
|
|
le32_to_cpu(bss->length)) : list->bss_info_le;
|
|
if (brcmf_compare_update_same_bss(cfg, bss,
|
|
bss_info_le))
|
|
goto exit;
|
|
}
|
|
memcpy(&cfg->escan_info.escan_buf[list->buflen], bss_info_le,
|
|
bi_length);
|
|
list->version = le32_to_cpu(bss_info_le->version);
|
|
list->buflen += bi_length;
|
|
list->count++;
|
|
} else {
|
|
cfg->escan_info.escan_state = WL_ESCAN_STATE_IDLE;
|
|
if (brcmf_p2p_scan_finding_common_channel(cfg, NULL))
|
|
goto exit;
|
|
if (cfg->int_escan_map || cfg->scan_request) {
|
|
brcmf_inform_bss(cfg);
|
|
aborted = status != BRCMF_E_STATUS_SUCCESS;
|
|
brcmf_notify_escan_complete(cfg, ifp, aborted, false);
|
|
} else
|
|
brcmf_dbg(SCAN, "Ignored scan complete result 0x%x\n",
|
|
status);
|
|
}
|
|
exit:
|
|
return 0;
|
|
}
|
|
|
|
static void brcmf_init_escan(struct brcmf_cfg80211_info *cfg)
|
|
{
|
|
brcmf_fweh_register(cfg->pub, BRCMF_E_ESCAN_RESULT,
|
|
brcmf_cfg80211_escan_handler);
|
|
cfg->escan_info.escan_state = WL_ESCAN_STATE_IDLE;
|
|
/* Init scan_timeout timer */
|
|
timer_setup(&cfg->escan_timeout, brcmf_escan_timeout, 0);
|
|
INIT_WORK(&cfg->escan_timeout_work,
|
|
brcmf_cfg80211_escan_timeout_worker);
|
|
}
|
|
|
|
static struct cfg80211_scan_request *
|
|
brcmf_alloc_internal_escan_request(struct wiphy *wiphy, u32 n_netinfo) {
|
|
struct cfg80211_scan_request *req;
|
|
size_t req_size;
|
|
|
|
req_size = sizeof(*req) +
|
|
n_netinfo * sizeof(req->channels[0]) +
|
|
n_netinfo * sizeof(*req->ssids);
|
|
|
|
req = kzalloc(req_size, GFP_KERNEL);
|
|
if (req) {
|
|
req->wiphy = wiphy;
|
|
req->ssids = (void *)(&req->channels[0]) +
|
|
n_netinfo * sizeof(req->channels[0]);
|
|
}
|
|
return req;
|
|
}
|
|
|
|
static int brcmf_internal_escan_add_info(struct cfg80211_scan_request *req,
|
|
u8 *ssid, u8 ssid_len, u8 channel)
|
|
{
|
|
struct ieee80211_channel *chan;
|
|
enum nl80211_band band;
|
|
int freq, i;
|
|
|
|
if (channel <= CH_MAX_2G_CHANNEL)
|
|
band = NL80211_BAND_2GHZ;
|
|
else
|
|
band = NL80211_BAND_5GHZ;
|
|
|
|
freq = ieee80211_channel_to_frequency(channel, band);
|
|
if (!freq)
|
|
return -EINVAL;
|
|
|
|
chan = ieee80211_get_channel(req->wiphy, freq);
|
|
if (!chan)
|
|
return -EINVAL;
|
|
|
|
for (i = 0; i < req->n_channels; i++) {
|
|
if (req->channels[i] == chan)
|
|
break;
|
|
}
|
|
if (i == req->n_channels)
|
|
req->channels[req->n_channels++] = chan;
|
|
|
|
for (i = 0; i < req->n_ssids; i++) {
|
|
if (req->ssids[i].ssid_len == ssid_len &&
|
|
!memcmp(req->ssids[i].ssid, ssid, ssid_len))
|
|
break;
|
|
}
|
|
if (i == req->n_ssids) {
|
|
memcpy(req->ssids[req->n_ssids].ssid, ssid, ssid_len);
|
|
req->ssids[req->n_ssids++].ssid_len = ssid_len;
|
|
}
|
|
return 0;
|
|
}
|
|
|
|
static int brcmf_start_internal_escan(struct brcmf_if *ifp, u32 fwmap,
|
|
struct cfg80211_scan_request *request)
|
|
{
|
|
struct brcmf_cfg80211_info *cfg = ifp->drvr->config;
|
|
int err;
|
|
|
|
if (test_bit(BRCMF_SCAN_STATUS_BUSY, &cfg->scan_status)) {
|
|
if (cfg->int_escan_map)
|
|
brcmf_dbg(SCAN, "aborting internal scan: map=%u\n",
|
|
cfg->int_escan_map);
|
|
/* Abort any on-going scan */
|
|
brcmf_abort_scanning(cfg);
|
|
}
|
|
|
|
brcmf_dbg(SCAN, "start internal scan: map=%u\n", fwmap);
|
|
set_bit(BRCMF_SCAN_STATUS_BUSY, &cfg->scan_status);
|
|
cfg->escan_info.run = brcmf_run_escan;
|
|
err = brcmf_do_escan(ifp, request);
|
|
if (err) {
|
|
clear_bit(BRCMF_SCAN_STATUS_BUSY, &cfg->scan_status);
|
|
return err;
|
|
}
|
|
cfg->int_escan_map = fwmap;
|
|
return 0;
|
|
}
|
|
|
|
static struct brcmf_pno_net_info_le *
|
|
brcmf_get_netinfo_array(struct brcmf_pno_scanresults_le *pfn_v1)
|
|
{
|
|
struct brcmf_pno_scanresults_v2_le *pfn_v2;
|
|
struct brcmf_pno_net_info_le *netinfo;
|
|
|
|
switch (pfn_v1->version) {
|
|
default:
|
|
WARN_ON(1);
|
|
fallthrough;
|
|
case cpu_to_le32(1):
|
|
netinfo = (struct brcmf_pno_net_info_le *)(pfn_v1 + 1);
|
|
break;
|
|
case cpu_to_le32(2):
|
|
pfn_v2 = (struct brcmf_pno_scanresults_v2_le *)pfn_v1;
|
|
netinfo = (struct brcmf_pno_net_info_le *)(pfn_v2 + 1);
|
|
break;
|
|
}
|
|
|
|
return netinfo;
|
|
}
|
|
|
|
/* PFN result doesn't have all the info which are required by the supplicant
|
|
* (For e.g IEs) Do a target Escan so that sched scan results are reported
|
|
* via wl_inform_single_bss in the required format. Escan does require the
|
|
* scan request in the form of cfg80211_scan_request. For timebeing, create
|
|
* cfg80211_scan_request one out of the received PNO event.
|
|
*/
|
|
static s32
|
|
brcmf_notify_sched_scan_results(struct brcmf_if *ifp,
|
|
const struct brcmf_event_msg *e, void *data)
|
|
{
|
|
struct brcmf_pub *drvr = ifp->drvr;
|
|
struct brcmf_cfg80211_info *cfg = drvr->config;
|
|
struct brcmf_pno_net_info_le *netinfo, *netinfo_start;
|
|
struct cfg80211_scan_request *request = NULL;
|
|
struct wiphy *wiphy = cfg_to_wiphy(cfg);
|
|
int i, err = 0;
|
|
struct brcmf_pno_scanresults_le *pfn_result;
|
|
u32 bucket_map;
|
|
u32 result_count;
|
|
u32 status;
|
|
u32 datalen;
|
|
|
|
brcmf_dbg(SCAN, "Enter\n");
|
|
|
|
if (e->datalen < (sizeof(*pfn_result) + sizeof(*netinfo))) {
|
|
brcmf_dbg(SCAN, "Event data to small. Ignore\n");
|
|
return 0;
|
|
}
|
|
|
|
if (e->event_code == BRCMF_E_PFN_NET_LOST) {
|
|
brcmf_dbg(SCAN, "PFN NET LOST event. Do Nothing\n");
|
|
return 0;
|
|
}
|
|
|
|
pfn_result = (struct brcmf_pno_scanresults_le *)data;
|
|
result_count = le32_to_cpu(pfn_result->count);
|
|
status = le32_to_cpu(pfn_result->status);
|
|
|
|
/* PFN event is limited to fit 512 bytes so we may get
|
|
* multiple NET_FOUND events. For now place a warning here.
|
|
*/
|
|
WARN_ON(status != BRCMF_PNO_SCAN_COMPLETE);
|
|
brcmf_dbg(SCAN, "PFN NET FOUND event. count: %d\n", result_count);
|
|
if (!result_count) {
|
|
bphy_err(drvr, "FALSE PNO Event. (pfn_count == 0)\n");
|
|
goto out_err;
|
|
}
|
|
|
|
netinfo_start = brcmf_get_netinfo_array(pfn_result);
|
|
datalen = e->datalen - ((void *)netinfo_start - (void *)pfn_result);
|
|
if (datalen < result_count * sizeof(*netinfo)) {
|
|
bphy_err(drvr, "insufficient event data\n");
|
|
goto out_err;
|
|
}
|
|
|
|
request = brcmf_alloc_internal_escan_request(wiphy,
|
|
result_count);
|
|
if (!request) {
|
|
err = -ENOMEM;
|
|
goto out_err;
|
|
}
|
|
|
|
bucket_map = 0;
|
|
for (i = 0; i < result_count; i++) {
|
|
netinfo = &netinfo_start[i];
|
|
|
|
if (netinfo->SSID_len > IEEE80211_MAX_SSID_LEN)
|
|
netinfo->SSID_len = IEEE80211_MAX_SSID_LEN;
|
|
brcmf_dbg(SCAN, "SSID:%.32s Channel:%d\n",
|
|
netinfo->SSID, netinfo->channel);
|
|
bucket_map |= brcmf_pno_get_bucket_map(cfg->pno, netinfo);
|
|
err = brcmf_internal_escan_add_info(request,
|
|
netinfo->SSID,
|
|
netinfo->SSID_len,
|
|
netinfo->channel);
|
|
if (err)
|
|
goto out_err;
|
|
}
|
|
|
|
if (!bucket_map)
|
|
goto free_req;
|
|
|
|
err = brcmf_start_internal_escan(ifp, bucket_map, request);
|
|
if (!err)
|
|
goto free_req;
|
|
|
|
out_err:
|
|
cfg80211_sched_scan_stopped(wiphy, 0);
|
|
free_req:
|
|
kfree(request);
|
|
return err;
|
|
}
|
|
|
|
static int
|
|
brcmf_cfg80211_sched_scan_start(struct wiphy *wiphy,
|
|
struct net_device *ndev,
|
|
struct cfg80211_sched_scan_request *req)
|
|
{
|
|
struct brcmf_cfg80211_info *cfg = wiphy_to_cfg(wiphy);
|
|
struct brcmf_if *ifp = netdev_priv(ndev);
|
|
struct brcmf_pub *drvr = cfg->pub;
|
|
|
|
brcmf_dbg(SCAN, "Enter: n_match_sets=%d n_ssids=%d\n",
|
|
req->n_match_sets, req->n_ssids);
|
|
|
|
if (test_bit(BRCMF_SCAN_STATUS_SUPPRESS, &cfg->scan_status)) {
|
|
bphy_err(drvr, "Scanning suppressed: status=%lu\n",
|
|
cfg->scan_status);
|
|
return -EAGAIN;
|
|
}
|
|
|
|
if (req->n_match_sets <= 0) {
|
|
brcmf_dbg(SCAN, "invalid number of matchsets specified: %d\n",
|
|
req->n_match_sets);
|
|
return -EINVAL;
|
|
}
|
|
|
|
return brcmf_pno_start_sched_scan(ifp, req);
|
|
}
|
|
|
|
static int brcmf_cfg80211_sched_scan_stop(struct wiphy *wiphy,
|
|
struct net_device *ndev, u64 reqid)
|
|
{
|
|
struct brcmf_cfg80211_info *cfg = wiphy_to_cfg(wiphy);
|
|
struct brcmf_if *ifp = netdev_priv(ndev);
|
|
|
|
brcmf_dbg(SCAN, "enter\n");
|
|
brcmf_pno_stop_sched_scan(ifp, reqid);
|
|
if (cfg->int_escan_map)
|
|
brcmf_notify_escan_complete(cfg, ifp, true, true);
|
|
return 0;
|
|
}
|
|
|
|
static __always_inline void brcmf_delay(u32 ms)
|
|
{
|
|
if (ms < 1000 / HZ) {
|
|
cond_resched();
|
|
mdelay(ms);
|
|
} else {
|
|
msleep(ms);
|
|
}
|
|
}
|
|
|
|
static s32 brcmf_config_wowl_pattern(struct brcmf_if *ifp, u8 cmd[4],
|
|
u8 *pattern, u32 patternsize, u8 *mask,
|
|
u32 packet_offset)
|
|
{
|
|
struct brcmf_fil_wowl_pattern_le *filter;
|
|
u32 masksize;
|
|
u32 patternoffset;
|
|
u8 *buf;
|
|
u32 bufsize;
|
|
s32 ret;
|
|
|
|
masksize = (patternsize + 7) / 8;
|
|
patternoffset = sizeof(*filter) - sizeof(filter->cmd) + masksize;
|
|
|
|
bufsize = sizeof(*filter) + patternsize + masksize;
|
|
buf = kzalloc(bufsize, GFP_KERNEL);
|
|
if (!buf)
|
|
return -ENOMEM;
|
|
filter = (struct brcmf_fil_wowl_pattern_le *)buf;
|
|
|
|
memcpy(filter->cmd, cmd, 4);
|
|
filter->masksize = cpu_to_le32(masksize);
|
|
filter->offset = cpu_to_le32(packet_offset);
|
|
filter->patternoffset = cpu_to_le32(patternoffset);
|
|
filter->patternsize = cpu_to_le32(patternsize);
|
|
filter->type = cpu_to_le32(BRCMF_WOWL_PATTERN_TYPE_BITMAP);
|
|
|
|
if ((mask) && (masksize))
|
|
memcpy(buf + sizeof(*filter), mask, masksize);
|
|
if ((pattern) && (patternsize))
|
|
memcpy(buf + sizeof(*filter) + masksize, pattern, patternsize);
|
|
|
|
ret = brcmf_fil_iovar_data_set(ifp, "wowl_pattern", buf, bufsize);
|
|
|
|
kfree(buf);
|
|
return ret;
|
|
}
|
|
|
|
static s32
|
|
brcmf_wowl_nd_results(struct brcmf_if *ifp, const struct brcmf_event_msg *e,
|
|
void *data)
|
|
{
|
|
struct brcmf_pub *drvr = ifp->drvr;
|
|
struct brcmf_cfg80211_info *cfg = drvr->config;
|
|
struct brcmf_pno_scanresults_le *pfn_result;
|
|
struct brcmf_pno_net_info_le *netinfo;
|
|
|
|
brcmf_dbg(SCAN, "Enter\n");
|
|
|
|
if (e->datalen < (sizeof(*pfn_result) + sizeof(*netinfo))) {
|
|
brcmf_dbg(SCAN, "Event data to small. Ignore\n");
|
|
return 0;
|
|
}
|
|
|
|
pfn_result = (struct brcmf_pno_scanresults_le *)data;
|
|
|
|
if (e->event_code == BRCMF_E_PFN_NET_LOST) {
|
|
brcmf_dbg(SCAN, "PFN NET LOST event. Ignore\n");
|
|
return 0;
|
|
}
|
|
|
|
if (le32_to_cpu(pfn_result->count) < 1) {
|
|
bphy_err(drvr, "Invalid result count, expected 1 (%d)\n",
|
|
le32_to_cpu(pfn_result->count));
|
|
return -EINVAL;
|
|
}
|
|
|
|
netinfo = brcmf_get_netinfo_array(pfn_result);
|
|
if (netinfo->SSID_len > IEEE80211_MAX_SSID_LEN)
|
|
netinfo->SSID_len = IEEE80211_MAX_SSID_LEN;
|
|
memcpy(cfg->wowl.nd->ssid.ssid, netinfo->SSID, netinfo->SSID_len);
|
|
cfg->wowl.nd->ssid.ssid_len = netinfo->SSID_len;
|
|
cfg->wowl.nd->n_channels = 1;
|
|
cfg->wowl.nd->channels[0] =
|
|
ieee80211_channel_to_frequency(netinfo->channel,
|
|
netinfo->channel <= CH_MAX_2G_CHANNEL ?
|
|
NL80211_BAND_2GHZ : NL80211_BAND_5GHZ);
|
|
cfg->wowl.nd_info->n_matches = 1;
|
|
cfg->wowl.nd_info->matches[0] = cfg->wowl.nd;
|
|
|
|
/* Inform (the resume task) that the net detect information was recvd */
|
|
cfg->wowl.nd_data_completed = true;
|
|
wake_up(&cfg->wowl.nd_data_wait);
|
|
|
|
return 0;
|
|
}
|
|
|
|
#ifdef CONFIG_PM
|
|
|
|
static void brcmf_report_wowl_wakeind(struct wiphy *wiphy, struct brcmf_if *ifp)
|
|
{
|
|
struct brcmf_cfg80211_info *cfg = wiphy_to_cfg(wiphy);
|
|
struct brcmf_pub *drvr = cfg->pub;
|
|
struct brcmf_wowl_wakeind_le wake_ind_le;
|
|
struct cfg80211_wowlan_wakeup wakeup_data;
|
|
struct cfg80211_wowlan_wakeup *wakeup;
|
|
u32 wakeind;
|
|
s32 err;
|
|
int timeout;
|
|
|
|
err = brcmf_fil_iovar_data_get(ifp, "wowl_wakeind", &wake_ind_le,
|
|
sizeof(wake_ind_le));
|
|
if (err) {
|
|
bphy_err(drvr, "Get wowl_wakeind failed, err = %d\n", err);
|
|
return;
|
|
}
|
|
|
|
wakeind = le32_to_cpu(wake_ind_le.ucode_wakeind);
|
|
if (wakeind & (BRCMF_WOWL_MAGIC | BRCMF_WOWL_DIS | BRCMF_WOWL_BCN |
|
|
BRCMF_WOWL_RETR | BRCMF_WOWL_NET |
|
|
BRCMF_WOWL_PFN_FOUND)) {
|
|
wakeup = &wakeup_data;
|
|
memset(&wakeup_data, 0, sizeof(wakeup_data));
|
|
wakeup_data.pattern_idx = -1;
|
|
|
|
if (wakeind & BRCMF_WOWL_MAGIC) {
|
|
brcmf_dbg(INFO, "WOWL Wake indicator: BRCMF_WOWL_MAGIC\n");
|
|
wakeup_data.magic_pkt = true;
|
|
}
|
|
if (wakeind & BRCMF_WOWL_DIS) {
|
|
brcmf_dbg(INFO, "WOWL Wake indicator: BRCMF_WOWL_DIS\n");
|
|
wakeup_data.disconnect = true;
|
|
}
|
|
if (wakeind & BRCMF_WOWL_BCN) {
|
|
brcmf_dbg(INFO, "WOWL Wake indicator: BRCMF_WOWL_BCN\n");
|
|
wakeup_data.disconnect = true;
|
|
}
|
|
if (wakeind & BRCMF_WOWL_RETR) {
|
|
brcmf_dbg(INFO, "WOWL Wake indicator: BRCMF_WOWL_RETR\n");
|
|
wakeup_data.disconnect = true;
|
|
}
|
|
if (wakeind & BRCMF_WOWL_NET) {
|
|
brcmf_dbg(INFO, "WOWL Wake indicator: BRCMF_WOWL_NET\n");
|
|
/* For now always map to pattern 0, no API to get
|
|
* correct information available at the moment.
|
|
*/
|
|
wakeup_data.pattern_idx = 0;
|
|
}
|
|
if (wakeind & BRCMF_WOWL_PFN_FOUND) {
|
|
brcmf_dbg(INFO, "WOWL Wake indicator: BRCMF_WOWL_PFN_FOUND\n");
|
|
timeout = wait_event_timeout(cfg->wowl.nd_data_wait,
|
|
cfg->wowl.nd_data_completed,
|
|
BRCMF_ND_INFO_TIMEOUT);
|
|
if (!timeout)
|
|
bphy_err(drvr, "No result for wowl net detect\n");
|
|
else
|
|
wakeup_data.net_detect = cfg->wowl.nd_info;
|
|
}
|
|
if (wakeind & BRCMF_WOWL_GTK_FAILURE) {
|
|
brcmf_dbg(INFO, "WOWL Wake indicator: BRCMF_WOWL_GTK_FAILURE\n");
|
|
wakeup_data.gtk_rekey_failure = true;
|
|
}
|
|
} else {
|
|
wakeup = NULL;
|
|
}
|
|
cfg80211_report_wowlan_wakeup(&ifp->vif->wdev, wakeup, GFP_KERNEL);
|
|
}
|
|
|
|
#else
|
|
|
|
static void brcmf_report_wowl_wakeind(struct wiphy *wiphy, struct brcmf_if *ifp)
|
|
{
|
|
}
|
|
|
|
#endif /* CONFIG_PM */
|
|
|
|
static s32 brcmf_cfg80211_resume(struct wiphy *wiphy)
|
|
{
|
|
struct brcmf_cfg80211_info *cfg = wiphy_to_cfg(wiphy);
|
|
struct net_device *ndev = cfg_to_ndev(cfg);
|
|
struct brcmf_if *ifp = netdev_priv(ndev);
|
|
|
|
brcmf_dbg(TRACE, "Enter\n");
|
|
|
|
if (cfg->wowl.active) {
|
|
brcmf_report_wowl_wakeind(wiphy, ifp);
|
|
brcmf_fil_iovar_int_set(ifp, "wowl_clear", 0);
|
|
brcmf_config_wowl_pattern(ifp, "clr", NULL, 0, NULL, 0);
|
|
if (!brcmf_feat_is_enabled(ifp, BRCMF_FEAT_WOWL_ARP_ND))
|
|
brcmf_configure_arp_nd_offload(ifp, true);
|
|
brcmf_fil_cmd_int_set(ifp, BRCMF_C_SET_PM,
|
|
cfg->wowl.pre_pmmode);
|
|
cfg->wowl.active = false;
|
|
if (cfg->wowl.nd_enabled) {
|
|
brcmf_cfg80211_sched_scan_stop(cfg->wiphy, ifp->ndev, 0);
|
|
brcmf_fweh_unregister(cfg->pub, BRCMF_E_PFN_NET_FOUND);
|
|
brcmf_fweh_register(cfg->pub, BRCMF_E_PFN_NET_FOUND,
|
|
brcmf_notify_sched_scan_results);
|
|
cfg->wowl.nd_enabled = false;
|
|
}
|
|
}
|
|
return 0;
|
|
}
|
|
|
|
static void brcmf_configure_wowl(struct brcmf_cfg80211_info *cfg,
|
|
struct brcmf_if *ifp,
|
|
struct cfg80211_wowlan *wowl)
|
|
{
|
|
u32 wowl_config;
|
|
struct brcmf_wowl_wakeind_le wowl_wakeind;
|
|
u32 i;
|
|
|
|
brcmf_dbg(TRACE, "Suspend, wowl config.\n");
|
|
|
|
if (!brcmf_feat_is_enabled(ifp, BRCMF_FEAT_WOWL_ARP_ND))
|
|
brcmf_configure_arp_nd_offload(ifp, false);
|
|
brcmf_fil_cmd_int_get(ifp, BRCMF_C_GET_PM, &cfg->wowl.pre_pmmode);
|
|
brcmf_fil_cmd_int_set(ifp, BRCMF_C_SET_PM, PM_MAX);
|
|
|
|
wowl_config = 0;
|
|
if (wowl->disconnect)
|
|
wowl_config = BRCMF_WOWL_DIS | BRCMF_WOWL_BCN | BRCMF_WOWL_RETR;
|
|
if (wowl->magic_pkt)
|
|
wowl_config |= BRCMF_WOWL_MAGIC;
|
|
if ((wowl->patterns) && (wowl->n_patterns)) {
|
|
wowl_config |= BRCMF_WOWL_NET;
|
|
for (i = 0; i < wowl->n_patterns; i++) {
|
|
brcmf_config_wowl_pattern(ifp, "add",
|
|
(u8 *)wowl->patterns[i].pattern,
|
|
wowl->patterns[i].pattern_len,
|
|
(u8 *)wowl->patterns[i].mask,
|
|
wowl->patterns[i].pkt_offset);
|
|
}
|
|
}
|
|
if (wowl->nd_config) {
|
|
brcmf_cfg80211_sched_scan_start(cfg->wiphy, ifp->ndev,
|
|
wowl->nd_config);
|
|
wowl_config |= BRCMF_WOWL_PFN_FOUND;
|
|
|
|
cfg->wowl.nd_data_completed = false;
|
|
cfg->wowl.nd_enabled = true;
|
|
/* Now reroute the event for PFN to the wowl function. */
|
|
brcmf_fweh_unregister(cfg->pub, BRCMF_E_PFN_NET_FOUND);
|
|
brcmf_fweh_register(cfg->pub, BRCMF_E_PFN_NET_FOUND,
|
|
brcmf_wowl_nd_results);
|
|
}
|
|
if (wowl->gtk_rekey_failure)
|
|
wowl_config |= BRCMF_WOWL_GTK_FAILURE;
|
|
if (!test_bit(BRCMF_VIF_STATUS_CONNECTED, &ifp->vif->sme_state))
|
|
wowl_config |= BRCMF_WOWL_UNASSOC;
|
|
|
|
memcpy(&wowl_wakeind, "clear", 6);
|
|
brcmf_fil_iovar_data_set(ifp, "wowl_wakeind", &wowl_wakeind,
|
|
sizeof(wowl_wakeind));
|
|
brcmf_fil_iovar_int_set(ifp, "wowl", wowl_config);
|
|
brcmf_fil_iovar_int_set(ifp, "wowl_activate", 1);
|
|
brcmf_bus_wowl_config(cfg->pub->bus_if, true);
|
|
cfg->wowl.active = true;
|
|
}
|
|
|
|
static int brcmf_keepalive_start(struct brcmf_if *ifp, unsigned int interval)
|
|
{
|
|
struct brcmf_mkeep_alive_pkt_le kalive = {0};
|
|
int ret = 0;
|
|
|
|
/* Configure Null function/data keepalive */
|
|
kalive.version = cpu_to_le16(1);
|
|
kalive.period_msec = cpu_to_le32(interval * MSEC_PER_SEC);
|
|
kalive.len_bytes = cpu_to_le16(0);
|
|
kalive.keep_alive_id = 0;
|
|
|
|
ret = brcmf_fil_iovar_data_set(ifp, "mkeep_alive", &kalive, sizeof(kalive));
|
|
if (ret)
|
|
brcmf_err("keep-alive packet config failed, ret=%d\n", ret);
|
|
|
|
return ret;
|
|
}
|
|
|
|
static s32 brcmf_cfg80211_suspend(struct wiphy *wiphy,
|
|
struct cfg80211_wowlan *wowl)
|
|
{
|
|
struct brcmf_cfg80211_info *cfg = wiphy_to_cfg(wiphy);
|
|
struct net_device *ndev = cfg_to_ndev(cfg);
|
|
struct brcmf_if *ifp = netdev_priv(ndev);
|
|
struct brcmf_cfg80211_vif *vif;
|
|
|
|
brcmf_dbg(TRACE, "Enter\n");
|
|
|
|
/* if the primary net_device is not READY there is nothing
|
|
* we can do but pray resume goes smoothly.
|
|
*/
|
|
if (!check_vif_up(ifp->vif))
|
|
goto exit;
|
|
|
|
/* Stop scheduled scan */
|
|
if (brcmf_feat_is_enabled(ifp, BRCMF_FEAT_PNO))
|
|
brcmf_cfg80211_sched_scan_stop(wiphy, ndev, 0);
|
|
|
|
/* end any scanning */
|
|
if (test_bit(BRCMF_SCAN_STATUS_BUSY, &cfg->scan_status))
|
|
brcmf_abort_scanning(cfg);
|
|
|
|
if (wowl == NULL) {
|
|
brcmf_bus_wowl_config(cfg->pub->bus_if, false);
|
|
list_for_each_entry(vif, &cfg->vif_list, list) {
|
|
if (!test_bit(BRCMF_VIF_STATUS_READY, &vif->sme_state))
|
|
continue;
|
|
/* While going to suspend if associated with AP
|
|
* disassociate from AP to save power while system is
|
|
* in suspended state
|
|
*/
|
|
brcmf_link_down(vif, WLAN_REASON_UNSPECIFIED, true);
|
|
/* Make sure WPA_Supplicant receives all the event
|
|
* generated due to DISASSOC call to the fw to keep
|
|
* the state fw and WPA_Supplicant state consistent
|
|
*/
|
|
brcmf_delay(500);
|
|
}
|
|
/* Configure MPC */
|
|
brcmf_set_mpc(ifp, 1);
|
|
|
|
} else {
|
|
/* Configure WOWL paramaters */
|
|
brcmf_configure_wowl(cfg, ifp, wowl);
|
|
|
|
/* Prevent disassociation due to inactivity with keep-alive */
|
|
brcmf_keepalive_start(ifp, 30);
|
|
}
|
|
|
|
exit:
|
|
brcmf_dbg(TRACE, "Exit\n");
|
|
/* clear any scanning activity */
|
|
cfg->scan_status = 0;
|
|
return 0;
|
|
}
|
|
|
|
static __used s32
|
|
brcmf_update_pmklist(struct brcmf_cfg80211_info *cfg, struct brcmf_if *ifp)
|
|
{
|
|
struct brcmf_pmk_list_le *pmk_list;
|
|
int i;
|
|
u32 npmk;
|
|
|
|
pmk_list = &cfg->pmk_list;
|
|
npmk = le32_to_cpu(pmk_list->npmk);
|
|
|
|
brcmf_dbg(CONN, "No of elements %d\n", npmk);
|
|
for (i = 0; i < npmk; i++)
|
|
brcmf_dbg(CONN, "PMK[%d]: %pM\n", i, &pmk_list->pmk[i].bssid);
|
|
|
|
return brcmf_fil_iovar_data_set(ifp, "pmkid_info", pmk_list,
|
|
sizeof(*pmk_list));
|
|
}
|
|
|
|
static s32
|
|
brcmf_cfg80211_set_pmksa(struct wiphy *wiphy, struct net_device *ndev,
|
|
struct cfg80211_pmksa *pmksa)
|
|
{
|
|
struct brcmf_cfg80211_info *cfg = wiphy_to_cfg(wiphy);
|
|
struct brcmf_if *ifp = netdev_priv(ndev);
|
|
struct brcmf_pmksa *pmk = &cfg->pmk_list.pmk[0];
|
|
struct brcmf_pub *drvr = cfg->pub;
|
|
s32 err;
|
|
u32 npmk, i;
|
|
|
|
brcmf_dbg(TRACE, "Enter\n");
|
|
if (!check_vif_up(ifp->vif))
|
|
return -EIO;
|
|
|
|
npmk = le32_to_cpu(cfg->pmk_list.npmk);
|
|
for (i = 0; i < npmk; i++)
|
|
if (!memcmp(pmksa->bssid, pmk[i].bssid, ETH_ALEN))
|
|
break;
|
|
if (i < BRCMF_MAXPMKID) {
|
|
memcpy(pmk[i].bssid, pmksa->bssid, ETH_ALEN);
|
|
memcpy(pmk[i].pmkid, pmksa->pmkid, WLAN_PMKID_LEN);
|
|
if (i == npmk) {
|
|
npmk++;
|
|
cfg->pmk_list.npmk = cpu_to_le32(npmk);
|
|
}
|
|
} else {
|
|
bphy_err(drvr, "Too many PMKSA entries cached %d\n", npmk);
|
|
return -EINVAL;
|
|
}
|
|
|
|
brcmf_dbg(CONN, "set_pmksa - PMK bssid: %pM =\n", pmk[npmk].bssid);
|
|
brcmf_dbg(CONN, "%*ph\n", WLAN_PMKID_LEN, pmk[npmk].pmkid);
|
|
|
|
err = brcmf_update_pmklist(cfg, ifp);
|
|
|
|
brcmf_dbg(TRACE, "Exit\n");
|
|
return err;
|
|
}
|
|
|
|
static s32
|
|
brcmf_cfg80211_del_pmksa(struct wiphy *wiphy, struct net_device *ndev,
|
|
struct cfg80211_pmksa *pmksa)
|
|
{
|
|
struct brcmf_cfg80211_info *cfg = wiphy_to_cfg(wiphy);
|
|
struct brcmf_if *ifp = netdev_priv(ndev);
|
|
struct brcmf_pmksa *pmk = &cfg->pmk_list.pmk[0];
|
|
struct brcmf_pub *drvr = cfg->pub;
|
|
s32 err;
|
|
u32 npmk, i;
|
|
|
|
brcmf_dbg(TRACE, "Enter\n");
|
|
if (!check_vif_up(ifp->vif))
|
|
return -EIO;
|
|
|
|
brcmf_dbg(CONN, "del_pmksa - PMK bssid = %pM\n", pmksa->bssid);
|
|
|
|
npmk = le32_to_cpu(cfg->pmk_list.npmk);
|
|
for (i = 0; i < npmk; i++)
|
|
if (!memcmp(pmksa->bssid, pmk[i].bssid, ETH_ALEN))
|
|
break;
|
|
|
|
if ((npmk > 0) && (i < npmk)) {
|
|
for (; i < (npmk - 1); i++) {
|
|
memcpy(&pmk[i].bssid, &pmk[i + 1].bssid, ETH_ALEN);
|
|
memcpy(&pmk[i].pmkid, &pmk[i + 1].pmkid,
|
|
WLAN_PMKID_LEN);
|
|
}
|
|
memset(&pmk[i], 0, sizeof(*pmk));
|
|
cfg->pmk_list.npmk = cpu_to_le32(npmk - 1);
|
|
} else {
|
|
bphy_err(drvr, "Cache entry not found\n");
|
|
return -EINVAL;
|
|
}
|
|
|
|
err = brcmf_update_pmklist(cfg, ifp);
|
|
|
|
brcmf_dbg(TRACE, "Exit\n");
|
|
return err;
|
|
|
|
}
|
|
|
|
static s32
|
|
brcmf_cfg80211_flush_pmksa(struct wiphy *wiphy, struct net_device *ndev)
|
|
{
|
|
struct brcmf_cfg80211_info *cfg = wiphy_to_cfg(wiphy);
|
|
struct brcmf_if *ifp = netdev_priv(ndev);
|
|
s32 err;
|
|
|
|
brcmf_dbg(TRACE, "Enter\n");
|
|
if (!check_vif_up(ifp->vif))
|
|
return -EIO;
|
|
|
|
memset(&cfg->pmk_list, 0, sizeof(cfg->pmk_list));
|
|
err = brcmf_update_pmklist(cfg, ifp);
|
|
|
|
brcmf_dbg(TRACE, "Exit\n");
|
|
return err;
|
|
|
|
}
|
|
|
|
static s32 brcmf_configure_opensecurity(struct brcmf_if *ifp)
|
|
{
|
|
struct brcmf_pub *drvr = ifp->drvr;
|
|
s32 err;
|
|
s32 wpa_val;
|
|
|
|
/* set auth */
|
|
err = brcmf_fil_bsscfg_int_set(ifp, "auth", 0);
|
|
if (err < 0) {
|
|
bphy_err(drvr, "auth error %d\n", err);
|
|
return err;
|
|
}
|
|
/* set wsec */
|
|
err = brcmf_fil_bsscfg_int_set(ifp, "wsec", 0);
|
|
if (err < 0) {
|
|
bphy_err(drvr, "wsec error %d\n", err);
|
|
return err;
|
|
}
|
|
/* set upper-layer auth */
|
|
if (brcmf_is_ibssmode(ifp->vif))
|
|
wpa_val = WPA_AUTH_NONE;
|
|
else
|
|
wpa_val = WPA_AUTH_DISABLED;
|
|
err = brcmf_fil_bsscfg_int_set(ifp, "wpa_auth", wpa_val);
|
|
if (err < 0) {
|
|
bphy_err(drvr, "wpa_auth error %d\n", err);
|
|
return err;
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
static bool brcmf_valid_wpa_oui(u8 *oui, bool is_rsn_ie)
|
|
{
|
|
if (is_rsn_ie)
|
|
return (memcmp(oui, RSN_OUI, TLV_OUI_LEN) == 0);
|
|
|
|
return (memcmp(oui, WPA_OUI, TLV_OUI_LEN) == 0);
|
|
}
|
|
|
|
static s32
|
|
brcmf_configure_wpaie(struct brcmf_if *ifp,
|
|
const struct brcmf_vs_tlv *wpa_ie,
|
|
bool is_rsn_ie)
|
|
{
|
|
struct brcmf_pub *drvr = ifp->drvr;
|
|
u32 auth = 0; /* d11 open authentication */
|
|
u16 count;
|
|
s32 err = 0;
|
|
s32 len;
|
|
u32 i;
|
|
u32 wsec;
|
|
u32 pval = 0;
|
|
u32 gval = 0;
|
|
u32 wpa_auth = 0;
|
|
u32 offset;
|
|
u8 *data;
|
|
u16 rsn_cap;
|
|
u32 wme_bss_disable;
|
|
u32 mfp;
|
|
|
|
brcmf_dbg(TRACE, "Enter\n");
|
|
if (wpa_ie == NULL)
|
|
goto exit;
|
|
|
|
len = wpa_ie->len + TLV_HDR_LEN;
|
|
data = (u8 *)wpa_ie;
|
|
offset = TLV_HDR_LEN;
|
|
if (!is_rsn_ie)
|
|
offset += VS_IE_FIXED_HDR_LEN;
|
|
else
|
|
offset += WPA_IE_VERSION_LEN;
|
|
|
|
/* check for multicast cipher suite */
|
|
if (offset + WPA_IE_MIN_OUI_LEN > len) {
|
|
err = -EINVAL;
|
|
bphy_err(drvr, "no multicast cipher suite\n");
|
|
goto exit;
|
|
}
|
|
|
|
if (!brcmf_valid_wpa_oui(&data[offset], is_rsn_ie)) {
|
|
err = -EINVAL;
|
|
bphy_err(drvr, "ivalid OUI\n");
|
|
goto exit;
|
|
}
|
|
offset += TLV_OUI_LEN;
|
|
|
|
/* pick up multicast cipher */
|
|
switch (data[offset]) {
|
|
case WPA_CIPHER_NONE:
|
|
gval = 0;
|
|
break;
|
|
case WPA_CIPHER_WEP_40:
|
|
case WPA_CIPHER_WEP_104:
|
|
gval = WEP_ENABLED;
|
|
break;
|
|
case WPA_CIPHER_TKIP:
|
|
gval = TKIP_ENABLED;
|
|
break;
|
|
case WPA_CIPHER_AES_CCM:
|
|
gval = AES_ENABLED;
|
|
break;
|
|
default:
|
|
err = -EINVAL;
|
|
bphy_err(drvr, "Invalid multi cast cipher info\n");
|
|
goto exit;
|
|
}
|
|
|
|
offset++;
|
|
/* walk thru unicast cipher list and pick up what we recognize */
|
|
count = data[offset] + (data[offset + 1] << 8);
|
|
offset += WPA_IE_SUITE_COUNT_LEN;
|
|
/* Check for unicast suite(s) */
|
|
if (offset + (WPA_IE_MIN_OUI_LEN * count) > len) {
|
|
err = -EINVAL;
|
|
bphy_err(drvr, "no unicast cipher suite\n");
|
|
goto exit;
|
|
}
|
|
for (i = 0; i < count; i++) {
|
|
if (!brcmf_valid_wpa_oui(&data[offset], is_rsn_ie)) {
|
|
err = -EINVAL;
|
|
bphy_err(drvr, "ivalid OUI\n");
|
|
goto exit;
|
|
}
|
|
offset += TLV_OUI_LEN;
|
|
switch (data[offset]) {
|
|
case WPA_CIPHER_NONE:
|
|
break;
|
|
case WPA_CIPHER_WEP_40:
|
|
case WPA_CIPHER_WEP_104:
|
|
pval |= WEP_ENABLED;
|
|
break;
|
|
case WPA_CIPHER_TKIP:
|
|
pval |= TKIP_ENABLED;
|
|
break;
|
|
case WPA_CIPHER_AES_CCM:
|
|
pval |= AES_ENABLED;
|
|
break;
|
|
default:
|
|
bphy_err(drvr, "Invalid unicast security info\n");
|
|
}
|
|
offset++;
|
|
}
|
|
/* walk thru auth management suite list and pick up what we recognize */
|
|
count = data[offset] + (data[offset + 1] << 8);
|
|
offset += WPA_IE_SUITE_COUNT_LEN;
|
|
/* Check for auth key management suite(s) */
|
|
if (offset + (WPA_IE_MIN_OUI_LEN * count) > len) {
|
|
err = -EINVAL;
|
|
bphy_err(drvr, "no auth key mgmt suite\n");
|
|
goto exit;
|
|
}
|
|
for (i = 0; i < count; i++) {
|
|
if (!brcmf_valid_wpa_oui(&data[offset], is_rsn_ie)) {
|
|
err = -EINVAL;
|
|
bphy_err(drvr, "ivalid OUI\n");
|
|
goto exit;
|
|
}
|
|
offset += TLV_OUI_LEN;
|
|
switch (data[offset]) {
|
|
case RSN_AKM_NONE:
|
|
brcmf_dbg(TRACE, "RSN_AKM_NONE\n");
|
|
wpa_auth |= WPA_AUTH_NONE;
|
|
break;
|
|
case RSN_AKM_UNSPECIFIED:
|
|
brcmf_dbg(TRACE, "RSN_AKM_UNSPECIFIED\n");
|
|
is_rsn_ie ? (wpa_auth |= WPA2_AUTH_UNSPECIFIED) :
|
|
(wpa_auth |= WPA_AUTH_UNSPECIFIED);
|
|
break;
|
|
case RSN_AKM_PSK:
|
|
brcmf_dbg(TRACE, "RSN_AKM_PSK\n");
|
|
is_rsn_ie ? (wpa_auth |= WPA2_AUTH_PSK) :
|
|
(wpa_auth |= WPA_AUTH_PSK);
|
|
break;
|
|
case RSN_AKM_SHA256_PSK:
|
|
brcmf_dbg(TRACE, "RSN_AKM_MFP_PSK\n");
|
|
wpa_auth |= WPA2_AUTH_PSK_SHA256;
|
|
break;
|
|
case RSN_AKM_SHA256_1X:
|
|
brcmf_dbg(TRACE, "RSN_AKM_MFP_1X\n");
|
|
wpa_auth |= WPA2_AUTH_1X_SHA256;
|
|
break;
|
|
case RSN_AKM_SAE:
|
|
brcmf_dbg(TRACE, "RSN_AKM_SAE\n");
|
|
wpa_auth |= WPA3_AUTH_SAE_PSK;
|
|
break;
|
|
default:
|
|
bphy_err(drvr, "Invalid key mgmt info\n");
|
|
}
|
|
offset++;
|
|
}
|
|
|
|
mfp = BRCMF_MFP_NONE;
|
|
if (is_rsn_ie) {
|
|
wme_bss_disable = 1;
|
|
if ((offset + RSN_CAP_LEN) <= len) {
|
|
rsn_cap = data[offset] + (data[offset + 1] << 8);
|
|
if (rsn_cap & RSN_CAP_PTK_REPLAY_CNTR_MASK)
|
|
wme_bss_disable = 0;
|
|
if (rsn_cap & RSN_CAP_MFPR_MASK) {
|
|
brcmf_dbg(TRACE, "MFP Required\n");
|
|
mfp = BRCMF_MFP_REQUIRED;
|
|
/* Firmware only supports mfp required in
|
|
* combination with WPA2_AUTH_PSK_SHA256,
|
|
* WPA2_AUTH_1X_SHA256, or WPA3_AUTH_SAE_PSK.
|
|
*/
|
|
if (!(wpa_auth & (WPA2_AUTH_PSK_SHA256 |
|
|
WPA2_AUTH_1X_SHA256 |
|
|
WPA3_AUTH_SAE_PSK))) {
|
|
err = -EINVAL;
|
|
goto exit;
|
|
}
|
|
/* Firmware has requirement that WPA2_AUTH_PSK/
|
|
* WPA2_AUTH_UNSPECIFIED be set, if SHA256 OUI
|
|
* is to be included in the rsn ie.
|
|
*/
|
|
if (wpa_auth & WPA2_AUTH_PSK_SHA256)
|
|
wpa_auth |= WPA2_AUTH_PSK;
|
|
else if (wpa_auth & WPA2_AUTH_1X_SHA256)
|
|
wpa_auth |= WPA2_AUTH_UNSPECIFIED;
|
|
} else if (rsn_cap & RSN_CAP_MFPC_MASK) {
|
|
brcmf_dbg(TRACE, "MFP Capable\n");
|
|
mfp = BRCMF_MFP_CAPABLE;
|
|
}
|
|
}
|
|
offset += RSN_CAP_LEN;
|
|
/* set wme_bss_disable to sync RSN Capabilities */
|
|
err = brcmf_fil_bsscfg_int_set(ifp, "wme_bss_disable",
|
|
wme_bss_disable);
|
|
if (err < 0) {
|
|
bphy_err(drvr, "wme_bss_disable error %d\n", err);
|
|
goto exit;
|
|
}
|
|
|
|
/* Skip PMKID cnt as it is know to be 0 for AP. */
|
|
offset += RSN_PMKID_COUNT_LEN;
|
|
|
|
/* See if there is BIP wpa suite left for MFP */
|
|
if (brcmf_feat_is_enabled(ifp, BRCMF_FEAT_MFP) &&
|
|
((offset + WPA_IE_MIN_OUI_LEN) <= len)) {
|
|
err = brcmf_fil_bsscfg_data_set(ifp, "bip",
|
|
&data[offset],
|
|
WPA_IE_MIN_OUI_LEN);
|
|
if (err < 0) {
|
|
bphy_err(drvr, "bip error %d\n", err);
|
|
goto exit;
|
|
}
|
|
}
|
|
}
|
|
/* FOR WPS , set SES_OW_ENABLED */
|
|
wsec = (pval | gval | SES_OW_ENABLED);
|
|
|
|
/* set auth */
|
|
err = brcmf_fil_bsscfg_int_set(ifp, "auth", auth);
|
|
if (err < 0) {
|
|
bphy_err(drvr, "auth error %d\n", err);
|
|
goto exit;
|
|
}
|
|
/* set wsec */
|
|
err = brcmf_fil_bsscfg_int_set(ifp, "wsec", wsec);
|
|
if (err < 0) {
|
|
bphy_err(drvr, "wsec error %d\n", err);
|
|
goto exit;
|
|
}
|
|
/* Configure MFP, this needs to go after wsec otherwise the wsec command
|
|
* will overwrite the values set by MFP
|
|
*/
|
|
if (brcmf_feat_is_enabled(ifp, BRCMF_FEAT_MFP)) {
|
|
err = brcmf_fil_bsscfg_int_set(ifp, "mfp", mfp);
|
|
if (err < 0) {
|
|
bphy_err(drvr, "mfp error %d\n", err);
|
|
goto exit;
|
|
}
|
|
}
|
|
/* set upper-layer auth */
|
|
err = brcmf_fil_bsscfg_int_set(ifp, "wpa_auth", wpa_auth);
|
|
if (err < 0) {
|
|
bphy_err(drvr, "wpa_auth error %d\n", err);
|
|
goto exit;
|
|
}
|
|
|
|
exit:
|
|
return err;
|
|
}
|
|
|
|
static s32
|
|
brcmf_parse_vndr_ies(const u8 *vndr_ie_buf, u32 vndr_ie_len,
|
|
struct parsed_vndr_ies *vndr_ies)
|
|
{
|
|
struct brcmf_vs_tlv *vndrie;
|
|
struct brcmf_tlv *ie;
|
|
struct parsed_vndr_ie_info *parsed_info;
|
|
s32 remaining_len;
|
|
|
|
remaining_len = (s32)vndr_ie_len;
|
|
memset(vndr_ies, 0, sizeof(*vndr_ies));
|
|
|
|
ie = (struct brcmf_tlv *)vndr_ie_buf;
|
|
while (ie) {
|
|
if (ie->id != WLAN_EID_VENDOR_SPECIFIC)
|
|
goto next;
|
|
vndrie = (struct brcmf_vs_tlv *)ie;
|
|
/* len should be bigger than OUI length + one */
|
|
if (vndrie->len < (VS_IE_FIXED_HDR_LEN - TLV_HDR_LEN + 1)) {
|
|
brcmf_err("invalid vndr ie. length is too small %d\n",
|
|
vndrie->len);
|
|
goto next;
|
|
}
|
|
/* if wpa or wme ie, do not add ie */
|
|
if (!memcmp(vndrie->oui, (u8 *)WPA_OUI, TLV_OUI_LEN) &&
|
|
((vndrie->oui_type == WPA_OUI_TYPE) ||
|
|
(vndrie->oui_type == WME_OUI_TYPE))) {
|
|
brcmf_dbg(TRACE, "Found WPA/WME oui. Do not add it\n");
|
|
goto next;
|
|
}
|
|
|
|
parsed_info = &vndr_ies->ie_info[vndr_ies->count];
|
|
|
|
/* save vndr ie information */
|
|
parsed_info->ie_ptr = (char *)vndrie;
|
|
parsed_info->ie_len = vndrie->len + TLV_HDR_LEN;
|
|
memcpy(&parsed_info->vndrie, vndrie, sizeof(*vndrie));
|
|
|
|
vndr_ies->count++;
|
|
|
|
brcmf_dbg(TRACE, "** OUI %3ph, type 0x%02x\n",
|
|
parsed_info->vndrie.oui,
|
|
parsed_info->vndrie.oui_type);
|
|
|
|
if (vndr_ies->count >= VNDR_IE_PARSE_LIMIT)
|
|
break;
|
|
next:
|
|
remaining_len -= (ie->len + TLV_HDR_LEN);
|
|
if (remaining_len <= TLV_HDR_LEN)
|
|
ie = NULL;
|
|
else
|
|
ie = (struct brcmf_tlv *)(((u8 *)ie) + ie->len +
|
|
TLV_HDR_LEN);
|
|
}
|
|
return 0;
|
|
}
|
|
|
|
static u32
|
|
brcmf_vndr_ie(u8 *iebuf, s32 pktflag, u8 *ie_ptr, u32 ie_len, s8 *add_del_cmd)
|
|
{
|
|
strscpy(iebuf, add_del_cmd, VNDR_IE_CMD_LEN);
|
|
|
|
put_unaligned_le32(1, &iebuf[VNDR_IE_COUNT_OFFSET]);
|
|
|
|
put_unaligned_le32(pktflag, &iebuf[VNDR_IE_PKTFLAG_OFFSET]);
|
|
|
|
memcpy(&iebuf[VNDR_IE_VSIE_OFFSET], ie_ptr, ie_len);
|
|
|
|
return ie_len + VNDR_IE_HDR_SIZE;
|
|
}
|
|
|
|
s32 brcmf_vif_set_mgmt_ie(struct brcmf_cfg80211_vif *vif, s32 pktflag,
|
|
const u8 *vndr_ie_buf, u32 vndr_ie_len)
|
|
{
|
|
struct brcmf_pub *drvr;
|
|
struct brcmf_if *ifp;
|
|
struct vif_saved_ie *saved_ie;
|
|
s32 err = 0;
|
|
u8 *iovar_ie_buf;
|
|
u8 *curr_ie_buf;
|
|
u8 *mgmt_ie_buf = NULL;
|
|
int mgmt_ie_buf_len;
|
|
u32 *mgmt_ie_len;
|
|
u32 del_add_ie_buf_len = 0;
|
|
u32 total_ie_buf_len = 0;
|
|
u32 parsed_ie_buf_len = 0;
|
|
struct parsed_vndr_ies old_vndr_ies;
|
|
struct parsed_vndr_ies new_vndr_ies;
|
|
struct parsed_vndr_ie_info *vndrie_info;
|
|
s32 i;
|
|
u8 *ptr;
|
|
int remained_buf_len;
|
|
|
|
if (!vif)
|
|
return -ENODEV;
|
|
ifp = vif->ifp;
|
|
drvr = ifp->drvr;
|
|
saved_ie = &vif->saved_ie;
|
|
|
|
brcmf_dbg(TRACE, "bsscfgidx %d, pktflag : 0x%02X\n", ifp->bsscfgidx,
|
|
pktflag);
|
|
iovar_ie_buf = kzalloc(WL_EXTRA_BUF_MAX, GFP_KERNEL);
|
|
if (!iovar_ie_buf)
|
|
return -ENOMEM;
|
|
curr_ie_buf = iovar_ie_buf;
|
|
switch (pktflag) {
|
|
case BRCMF_VNDR_IE_PRBREQ_FLAG:
|
|
mgmt_ie_buf = saved_ie->probe_req_ie;
|
|
mgmt_ie_len = &saved_ie->probe_req_ie_len;
|
|
mgmt_ie_buf_len = sizeof(saved_ie->probe_req_ie);
|
|
break;
|
|
case BRCMF_VNDR_IE_PRBRSP_FLAG:
|
|
mgmt_ie_buf = saved_ie->probe_res_ie;
|
|
mgmt_ie_len = &saved_ie->probe_res_ie_len;
|
|
mgmt_ie_buf_len = sizeof(saved_ie->probe_res_ie);
|
|
break;
|
|
case BRCMF_VNDR_IE_BEACON_FLAG:
|
|
mgmt_ie_buf = saved_ie->beacon_ie;
|
|
mgmt_ie_len = &saved_ie->beacon_ie_len;
|
|
mgmt_ie_buf_len = sizeof(saved_ie->beacon_ie);
|
|
break;
|
|
case BRCMF_VNDR_IE_ASSOCREQ_FLAG:
|
|
mgmt_ie_buf = saved_ie->assoc_req_ie;
|
|
mgmt_ie_len = &saved_ie->assoc_req_ie_len;
|
|
mgmt_ie_buf_len = sizeof(saved_ie->assoc_req_ie);
|
|
break;
|
|
case BRCMF_VNDR_IE_ASSOCRSP_FLAG:
|
|
mgmt_ie_buf = saved_ie->assoc_res_ie;
|
|
mgmt_ie_len = &saved_ie->assoc_res_ie_len;
|
|
mgmt_ie_buf_len = sizeof(saved_ie->assoc_res_ie);
|
|
break;
|
|
default:
|
|
err = -EPERM;
|
|
bphy_err(drvr, "not suitable type\n");
|
|
goto exit;
|
|
}
|
|
|
|
if (vndr_ie_len > mgmt_ie_buf_len) {
|
|
err = -ENOMEM;
|
|
bphy_err(drvr, "extra IE size too big\n");
|
|
goto exit;
|
|
}
|
|
|
|
/* parse and save new vndr_ie in curr_ie_buff before comparing it */
|
|
if (vndr_ie_buf && vndr_ie_len && curr_ie_buf) {
|
|
ptr = curr_ie_buf;
|
|
brcmf_parse_vndr_ies(vndr_ie_buf, vndr_ie_len, &new_vndr_ies);
|
|
for (i = 0; i < new_vndr_ies.count; i++) {
|
|
vndrie_info = &new_vndr_ies.ie_info[i];
|
|
memcpy(ptr + parsed_ie_buf_len, vndrie_info->ie_ptr,
|
|
vndrie_info->ie_len);
|
|
parsed_ie_buf_len += vndrie_info->ie_len;
|
|
}
|
|
}
|
|
|
|
if (mgmt_ie_buf && *mgmt_ie_len) {
|
|
if (parsed_ie_buf_len && (parsed_ie_buf_len == *mgmt_ie_len) &&
|
|
(memcmp(mgmt_ie_buf, curr_ie_buf,
|
|
parsed_ie_buf_len) == 0)) {
|
|
brcmf_dbg(TRACE, "Previous mgmt IE equals to current IE\n");
|
|
goto exit;
|
|
}
|
|
|
|
/* parse old vndr_ie */
|
|
brcmf_parse_vndr_ies(mgmt_ie_buf, *mgmt_ie_len, &old_vndr_ies);
|
|
|
|
/* make a command to delete old ie */
|
|
for (i = 0; i < old_vndr_ies.count; i++) {
|
|
vndrie_info = &old_vndr_ies.ie_info[i];
|
|
|
|
brcmf_dbg(TRACE, "DEL ID : %d, Len: %d , OUI:%3ph\n",
|
|
vndrie_info->vndrie.id,
|
|
vndrie_info->vndrie.len,
|
|
vndrie_info->vndrie.oui);
|
|
|
|
del_add_ie_buf_len = brcmf_vndr_ie(curr_ie_buf, pktflag,
|
|
vndrie_info->ie_ptr,
|
|
vndrie_info->ie_len,
|
|
"del");
|
|
curr_ie_buf += del_add_ie_buf_len;
|
|
total_ie_buf_len += del_add_ie_buf_len;
|
|
}
|
|
}
|
|
|
|
*mgmt_ie_len = 0;
|
|
/* Add if there is any extra IE */
|
|
if (mgmt_ie_buf && parsed_ie_buf_len) {
|
|
ptr = mgmt_ie_buf;
|
|
|
|
remained_buf_len = mgmt_ie_buf_len;
|
|
|
|
/* make a command to add new ie */
|
|
for (i = 0; i < new_vndr_ies.count; i++) {
|
|
vndrie_info = &new_vndr_ies.ie_info[i];
|
|
|
|
/* verify remained buf size before copy data */
|
|
if (remained_buf_len < (vndrie_info->vndrie.len +
|
|
VNDR_IE_VSIE_OFFSET)) {
|
|
bphy_err(drvr, "no space in mgmt_ie_buf: len left %d",
|
|
remained_buf_len);
|
|
break;
|
|
}
|
|
remained_buf_len -= (vndrie_info->ie_len +
|
|
VNDR_IE_VSIE_OFFSET);
|
|
|
|
brcmf_dbg(TRACE, "ADDED ID : %d, Len: %d, OUI:%3ph\n",
|
|
vndrie_info->vndrie.id,
|
|
vndrie_info->vndrie.len,
|
|
vndrie_info->vndrie.oui);
|
|
|
|
del_add_ie_buf_len = brcmf_vndr_ie(curr_ie_buf, pktflag,
|
|
vndrie_info->ie_ptr,
|
|
vndrie_info->ie_len,
|
|
"add");
|
|
|
|
/* save the parsed IE in wl struct */
|
|
memcpy(ptr + (*mgmt_ie_len), vndrie_info->ie_ptr,
|
|
vndrie_info->ie_len);
|
|
*mgmt_ie_len += vndrie_info->ie_len;
|
|
|
|
curr_ie_buf += del_add_ie_buf_len;
|
|
total_ie_buf_len += del_add_ie_buf_len;
|
|
}
|
|
}
|
|
if (total_ie_buf_len) {
|
|
err = brcmf_fil_bsscfg_data_set(ifp, "vndr_ie", iovar_ie_buf,
|
|
total_ie_buf_len);
|
|
if (err)
|
|
bphy_err(drvr, "vndr ie set error : %d\n", err);
|
|
}
|
|
|
|
exit:
|
|
kfree(iovar_ie_buf);
|
|
return err;
|
|
}
|
|
|
|
s32 brcmf_vif_clear_mgmt_ies(struct brcmf_cfg80211_vif *vif)
|
|
{
|
|
static const s32 pktflags[] = {
|
|
BRCMF_VNDR_IE_PRBREQ_FLAG,
|
|
BRCMF_VNDR_IE_PRBRSP_FLAG,
|
|
BRCMF_VNDR_IE_BEACON_FLAG
|
|
};
|
|
int i;
|
|
|
|
for (i = 0; i < ARRAY_SIZE(pktflags); i++)
|
|
brcmf_vif_set_mgmt_ie(vif, pktflags[i], NULL, 0);
|
|
|
|
memset(&vif->saved_ie, 0, sizeof(vif->saved_ie));
|
|
return 0;
|
|
}
|
|
|
|
static s32
|
|
brcmf_config_ap_mgmt_ie(struct brcmf_cfg80211_vif *vif,
|
|
struct cfg80211_beacon_data *beacon)
|
|
{
|
|
struct brcmf_pub *drvr = vif->ifp->drvr;
|
|
s32 err;
|
|
|
|
/* Set Beacon IEs to FW */
|
|
err = brcmf_vif_set_mgmt_ie(vif, BRCMF_VNDR_IE_BEACON_FLAG,
|
|
beacon->tail, beacon->tail_len);
|
|
if (err) {
|
|
bphy_err(drvr, "Set Beacon IE Failed\n");
|
|
return err;
|
|
}
|
|
brcmf_dbg(TRACE, "Applied Vndr IEs for Beacon\n");
|
|
|
|
/* Set Probe Response IEs to FW */
|
|
err = brcmf_vif_set_mgmt_ie(vif, BRCMF_VNDR_IE_PRBRSP_FLAG,
|
|
beacon->proberesp_ies,
|
|
beacon->proberesp_ies_len);
|
|
if (err)
|
|
bphy_err(drvr, "Set Probe Resp IE Failed\n");
|
|
else
|
|
brcmf_dbg(TRACE, "Applied Vndr IEs for Probe Resp\n");
|
|
|
|
/* Set Assoc Response IEs to FW */
|
|
err = brcmf_vif_set_mgmt_ie(vif, BRCMF_VNDR_IE_ASSOCRSP_FLAG,
|
|
beacon->assocresp_ies,
|
|
beacon->assocresp_ies_len);
|
|
if (err)
|
|
brcmf_err("Set Assoc Resp IE Failed\n");
|
|
else
|
|
brcmf_dbg(TRACE, "Applied Vndr IEs for Assoc Resp\n");
|
|
|
|
return err;
|
|
}
|
|
|
|
static s32
|
|
brcmf_parse_configure_security(struct brcmf_if *ifp,
|
|
struct cfg80211_ap_settings *settings,
|
|
enum nl80211_iftype dev_role)
|
|
{
|
|
const struct brcmf_tlv *rsn_ie;
|
|
const struct brcmf_vs_tlv *wpa_ie;
|
|
s32 err = 0;
|
|
|
|
/* find the RSN_IE */
|
|
rsn_ie = brcmf_parse_tlvs((u8 *)settings->beacon.tail,
|
|
settings->beacon.tail_len, WLAN_EID_RSN);
|
|
|
|
/* find the WPA_IE */
|
|
wpa_ie = brcmf_find_wpaie((u8 *)settings->beacon.tail,
|
|
settings->beacon.tail_len);
|
|
|
|
if (wpa_ie || rsn_ie) {
|
|
brcmf_dbg(TRACE, "WPA(2) IE is found\n");
|
|
if (wpa_ie) {
|
|
/* WPA IE */
|
|
err = brcmf_configure_wpaie(ifp, wpa_ie, false);
|
|
if (err < 0)
|
|
return err;
|
|
} else {
|
|
struct brcmf_vs_tlv *tmp_ie;
|
|
|
|
tmp_ie = (struct brcmf_vs_tlv *)rsn_ie;
|
|
|
|
/* RSN IE */
|
|
err = brcmf_configure_wpaie(ifp, tmp_ie, true);
|
|
if (err < 0)
|
|
return err;
|
|
}
|
|
} else {
|
|
brcmf_dbg(TRACE, "No WPA(2) IEs found\n");
|
|
brcmf_configure_opensecurity(ifp);
|
|
}
|
|
|
|
return err;
|
|
}
|
|
|
|
static s32
|
|
brcmf_cfg80211_start_ap(struct wiphy *wiphy, struct net_device *ndev,
|
|
struct cfg80211_ap_settings *settings)
|
|
{
|
|
s32 ie_offset;
|
|
struct brcmf_cfg80211_info *cfg = wiphy_to_cfg(wiphy);
|
|
struct brcmf_if *ifp = netdev_priv(ndev);
|
|
struct brcmf_pub *drvr = cfg->pub;
|
|
struct brcmf_cfg80211_profile *profile = &ifp->vif->profile;
|
|
struct cfg80211_crypto_settings *crypto = &settings->crypto;
|
|
const struct brcmf_tlv *ssid_ie;
|
|
const struct brcmf_tlv *country_ie;
|
|
struct brcmf_ssid_le ssid_le;
|
|
s32 err = -EPERM;
|
|
struct brcmf_join_params join_params;
|
|
enum nl80211_iftype dev_role;
|
|
struct brcmf_fil_bss_enable_le bss_enable;
|
|
u16 chanspec = chandef_to_chanspec(&cfg->d11inf, &settings->chandef);
|
|
bool mbss;
|
|
int is_11d;
|
|
bool supports_11d;
|
|
|
|
brcmf_dbg(TRACE, "ctrlchn=%d, center=%d, bw=%d, beacon_interval=%d, dtim_period=%d,\n",
|
|
settings->chandef.chan->hw_value,
|
|
settings->chandef.center_freq1, settings->chandef.width,
|
|
settings->beacon_interval, settings->dtim_period);
|
|
brcmf_dbg(TRACE, "ssid=%s(%zu), auth_type=%d, inactivity_timeout=%d\n",
|
|
settings->ssid, settings->ssid_len, settings->auth_type,
|
|
settings->inactivity_timeout);
|
|
dev_role = ifp->vif->wdev.iftype;
|
|
mbss = ifp->vif->mbss;
|
|
|
|
/* store current 11d setting */
|
|
if (brcmf_fil_cmd_int_get(ifp, BRCMF_C_GET_REGULATORY,
|
|
&ifp->vif->is_11d)) {
|
|
is_11d = supports_11d = false;
|
|
} else {
|
|
country_ie = brcmf_parse_tlvs((u8 *)settings->beacon.tail,
|
|
settings->beacon.tail_len,
|
|
WLAN_EID_COUNTRY);
|
|
is_11d = country_ie ? 1 : 0;
|
|
supports_11d = true;
|
|
}
|
|
|
|
memset(&ssid_le, 0, sizeof(ssid_le));
|
|
if (settings->ssid == NULL || settings->ssid_len == 0) {
|
|
ie_offset = DOT11_MGMT_HDR_LEN + DOT11_BCN_PRB_FIXED_LEN;
|
|
ssid_ie = brcmf_parse_tlvs(
|
|
(u8 *)&settings->beacon.head[ie_offset],
|
|
settings->beacon.head_len - ie_offset,
|
|
WLAN_EID_SSID);
|
|
if (!ssid_ie || ssid_ie->len > IEEE80211_MAX_SSID_LEN)
|
|
return -EINVAL;
|
|
|
|
memcpy(ssid_le.SSID, ssid_ie->data, ssid_ie->len);
|
|
ssid_le.SSID_len = cpu_to_le32(ssid_ie->len);
|
|
brcmf_dbg(TRACE, "SSID is (%s) in Head\n", ssid_le.SSID);
|
|
} else {
|
|
memcpy(ssid_le.SSID, settings->ssid, settings->ssid_len);
|
|
ssid_le.SSID_len = cpu_to_le32((u32)settings->ssid_len);
|
|
}
|
|
|
|
if (!mbss) {
|
|
brcmf_set_mpc(ifp, 0);
|
|
brcmf_configure_arp_nd_offload(ifp, false);
|
|
}
|
|
|
|
/* Parameters shared by all radio interfaces */
|
|
if (!mbss) {
|
|
if ((supports_11d) && (is_11d != ifp->vif->is_11d)) {
|
|
err = brcmf_fil_cmd_int_set(ifp, BRCMF_C_SET_REGULATORY,
|
|
is_11d);
|
|
if (err < 0) {
|
|
bphy_err(drvr, "Regulatory Set Error, %d\n",
|
|
err);
|
|
goto exit;
|
|
}
|
|
}
|
|
if (settings->beacon_interval) {
|
|
err = brcmf_fil_cmd_int_set(ifp, BRCMF_C_SET_BCNPRD,
|
|
settings->beacon_interval);
|
|
if (err < 0) {
|
|
bphy_err(drvr, "Beacon Interval Set Error, %d\n",
|
|
err);
|
|
goto exit;
|
|
}
|
|
}
|
|
if (settings->dtim_period) {
|
|
err = brcmf_fil_cmd_int_set(ifp, BRCMF_C_SET_DTIMPRD,
|
|
settings->dtim_period);
|
|
if (err < 0) {
|
|
bphy_err(drvr, "DTIM Interval Set Error, %d\n",
|
|
err);
|
|
goto exit;
|
|
}
|
|
}
|
|
|
|
if ((dev_role == NL80211_IFTYPE_AP) &&
|
|
((ifp->ifidx == 0) ||
|
|
(!brcmf_feat_is_enabled(ifp, BRCMF_FEAT_RSDB) &&
|
|
!brcmf_feat_is_enabled(ifp, BRCMF_FEAT_MCHAN)))) {
|
|
err = brcmf_fil_cmd_int_set(ifp, BRCMF_C_DOWN, 1);
|
|
if (err < 0) {
|
|
bphy_err(drvr, "BRCMF_C_DOWN error %d\n",
|
|
err);
|
|
goto exit;
|
|
}
|
|
brcmf_fil_iovar_int_set(ifp, "apsta", 0);
|
|
}
|
|
|
|
err = brcmf_fil_cmd_int_set(ifp, BRCMF_C_SET_INFRA, 1);
|
|
if (err < 0) {
|
|
bphy_err(drvr, "SET INFRA error %d\n", err);
|
|
goto exit;
|
|
}
|
|
} else if (WARN_ON(supports_11d && (is_11d != ifp->vif->is_11d))) {
|
|
/* Multiple-BSS should use same 11d configuration */
|
|
err = -EINVAL;
|
|
goto exit;
|
|
}
|
|
|
|
/* Interface specific setup */
|
|
if (dev_role == NL80211_IFTYPE_AP) {
|
|
if ((brcmf_feat_is_enabled(ifp, BRCMF_FEAT_MBSS)) && (!mbss))
|
|
brcmf_fil_iovar_int_set(ifp, "mbss", 1);
|
|
|
|
err = brcmf_fil_cmd_int_set(ifp, BRCMF_C_SET_AP, 1);
|
|
if (err < 0) {
|
|
bphy_err(drvr, "setting AP mode failed %d\n",
|
|
err);
|
|
goto exit;
|
|
}
|
|
if (!mbss) {
|
|
/* Firmware 10.x requires setting channel after enabling
|
|
* AP and before bringing interface up.
|
|
*/
|
|
err = brcmf_fil_iovar_int_set(ifp, "chanspec", chanspec);
|
|
if (err < 0) {
|
|
bphy_err(drvr, "Set Channel failed: chspec=%d, %d\n",
|
|
chanspec, err);
|
|
goto exit;
|
|
}
|
|
}
|
|
err = brcmf_fil_cmd_int_set(ifp, BRCMF_C_UP, 1);
|
|
if (err < 0) {
|
|
bphy_err(drvr, "BRCMF_C_UP error (%d)\n", err);
|
|
goto exit;
|
|
}
|
|
|
|
if (crypto->psk) {
|
|
brcmf_dbg(INFO, "using PSK offload\n");
|
|
profile->use_fwauth |= BIT(BRCMF_PROFILE_FWAUTH_PSK);
|
|
err = brcmf_set_pmk(ifp, crypto->psk,
|
|
BRCMF_WSEC_MAX_PSK_LEN);
|
|
if (err < 0)
|
|
goto exit;
|
|
}
|
|
if (crypto->sae_pwd) {
|
|
brcmf_dbg(INFO, "using SAE offload\n");
|
|
profile->use_fwauth |= BIT(BRCMF_PROFILE_FWAUTH_SAE);
|
|
err = brcmf_set_sae_password(ifp, crypto->sae_pwd,
|
|
crypto->sae_pwd_len);
|
|
if (err < 0)
|
|
goto exit;
|
|
}
|
|
if (profile->use_fwauth == 0)
|
|
profile->use_fwauth = BIT(BRCMF_PROFILE_FWAUTH_NONE);
|
|
|
|
err = brcmf_parse_configure_security(ifp, settings,
|
|
NL80211_IFTYPE_AP);
|
|
if (err < 0) {
|
|
bphy_err(drvr, "brcmf_parse_configure_security error\n");
|
|
goto exit;
|
|
}
|
|
|
|
/* On DOWN the firmware removes the WEP keys, reconfigure
|
|
* them if they were set.
|
|
*/
|
|
brcmf_cfg80211_reconfigure_wep(ifp);
|
|
|
|
memset(&join_params, 0, sizeof(join_params));
|
|
/* join parameters starts with ssid */
|
|
memcpy(&join_params.ssid_le, &ssid_le, sizeof(ssid_le));
|
|
/* create softap */
|
|
err = brcmf_fil_cmd_data_set(ifp, BRCMF_C_SET_SSID,
|
|
&join_params, sizeof(join_params));
|
|
if (err < 0) {
|
|
bphy_err(drvr, "SET SSID error (%d)\n", err);
|
|
goto exit;
|
|
}
|
|
|
|
err = brcmf_fil_iovar_int_set(ifp, "closednet",
|
|
settings->hidden_ssid);
|
|
if (err) {
|
|
bphy_err(drvr, "%s closednet error (%d)\n",
|
|
settings->hidden_ssid ?
|
|
"enabled" : "disabled",
|
|
err);
|
|
goto exit;
|
|
}
|
|
|
|
brcmf_dbg(TRACE, "AP mode configuration complete\n");
|
|
} else if (dev_role == NL80211_IFTYPE_P2P_GO) {
|
|
err = brcmf_fil_iovar_int_set(ifp, "chanspec", chanspec);
|
|
if (err < 0) {
|
|
bphy_err(drvr, "Set Channel failed: chspec=%d, %d\n",
|
|
chanspec, err);
|
|
goto exit;
|
|
}
|
|
|
|
err = brcmf_parse_configure_security(ifp, settings,
|
|
NL80211_IFTYPE_P2P_GO);
|
|
if (err < 0) {
|
|
brcmf_err("brcmf_parse_configure_security error\n");
|
|
goto exit;
|
|
}
|
|
|
|
err = brcmf_fil_bsscfg_data_set(ifp, "ssid", &ssid_le,
|
|
sizeof(ssid_le));
|
|
if (err < 0) {
|
|
bphy_err(drvr, "setting ssid failed %d\n", err);
|
|
goto exit;
|
|
}
|
|
bss_enable.bsscfgidx = cpu_to_le32(ifp->bsscfgidx);
|
|
bss_enable.enable = cpu_to_le32(1);
|
|
err = brcmf_fil_iovar_data_set(ifp, "bss", &bss_enable,
|
|
sizeof(bss_enable));
|
|
if (err < 0) {
|
|
bphy_err(drvr, "bss_enable config failed %d\n", err);
|
|
goto exit;
|
|
}
|
|
|
|
brcmf_dbg(TRACE, "GO mode configuration complete\n");
|
|
} else {
|
|
WARN_ON(1);
|
|
}
|
|
|
|
brcmf_config_ap_mgmt_ie(ifp->vif, &settings->beacon);
|
|
set_bit(BRCMF_VIF_STATUS_AP_CREATED, &ifp->vif->sme_state);
|
|
brcmf_net_setcarrier(ifp, true);
|
|
|
|
exit:
|
|
if ((err) && (!mbss)) {
|
|
brcmf_set_mpc(ifp, 1);
|
|
brcmf_configure_arp_nd_offload(ifp, true);
|
|
}
|
|
return err;
|
|
}
|
|
|
|
static int brcmf_cfg80211_stop_ap(struct wiphy *wiphy, struct net_device *ndev,
|
|
unsigned int link_id)
|
|
{
|
|
struct brcmf_cfg80211_info *cfg = wiphy_to_cfg(wiphy);
|
|
struct brcmf_if *ifp = netdev_priv(ndev);
|
|
struct brcmf_pub *drvr = cfg->pub;
|
|
struct brcmf_cfg80211_profile *profile = &ifp->vif->profile;
|
|
s32 err;
|
|
struct brcmf_fil_bss_enable_le bss_enable;
|
|
struct brcmf_join_params join_params;
|
|
|
|
brcmf_dbg(TRACE, "Enter\n");
|
|
|
|
if (ifp->vif->wdev.iftype == NL80211_IFTYPE_AP) {
|
|
/* Due to most likely deauths outstanding we sleep */
|
|
/* first to make sure they get processed by fw. */
|
|
msleep(400);
|
|
|
|
if (profile->use_fwauth != BIT(BRCMF_PROFILE_FWAUTH_NONE)) {
|
|
if (profile->use_fwauth & BIT(BRCMF_PROFILE_FWAUTH_PSK))
|
|
brcmf_set_pmk(ifp, NULL, 0);
|
|
if (profile->use_fwauth & BIT(BRCMF_PROFILE_FWAUTH_SAE))
|
|
brcmf_set_sae_password(ifp, NULL, 0);
|
|
profile->use_fwauth = BIT(BRCMF_PROFILE_FWAUTH_NONE);
|
|
}
|
|
|
|
if (ifp->vif->mbss) {
|
|
err = brcmf_fil_cmd_int_set(ifp, BRCMF_C_DOWN, 1);
|
|
return err;
|
|
}
|
|
|
|
/* First BSS doesn't get a full reset */
|
|
if (ifp->bsscfgidx == 0)
|
|
brcmf_fil_iovar_int_set(ifp, "closednet", 0);
|
|
|
|
memset(&join_params, 0, sizeof(join_params));
|
|
err = brcmf_fil_cmd_data_set(ifp, BRCMF_C_SET_SSID,
|
|
&join_params, sizeof(join_params));
|
|
if (err < 0)
|
|
bphy_err(drvr, "SET SSID error (%d)\n", err);
|
|
err = brcmf_fil_cmd_int_set(ifp, BRCMF_C_DOWN, 1);
|
|
if (err < 0)
|
|
bphy_err(drvr, "BRCMF_C_DOWN error %d\n", err);
|
|
err = brcmf_fil_cmd_int_set(ifp, BRCMF_C_SET_AP, 0);
|
|
if (err < 0)
|
|
bphy_err(drvr, "setting AP mode failed %d\n", err);
|
|
if (brcmf_feat_is_enabled(ifp, BRCMF_FEAT_MBSS))
|
|
brcmf_fil_iovar_int_set(ifp, "mbss", 0);
|
|
brcmf_fil_cmd_int_set(ifp, BRCMF_C_SET_REGULATORY,
|
|
ifp->vif->is_11d);
|
|
/* Bring device back up so it can be used again */
|
|
err = brcmf_fil_cmd_int_set(ifp, BRCMF_C_UP, 1);
|
|
if (err < 0)
|
|
bphy_err(drvr, "BRCMF_C_UP error %d\n", err);
|
|
|
|
brcmf_vif_clear_mgmt_ies(ifp->vif);
|
|
} else {
|
|
bss_enable.bsscfgidx = cpu_to_le32(ifp->bsscfgidx);
|
|
bss_enable.enable = cpu_to_le32(0);
|
|
err = brcmf_fil_iovar_data_set(ifp, "bss", &bss_enable,
|
|
sizeof(bss_enable));
|
|
if (err < 0)
|
|
bphy_err(drvr, "bss_enable config failed %d\n", err);
|
|
}
|
|
brcmf_set_mpc(ifp, 1);
|
|
brcmf_configure_arp_nd_offload(ifp, true);
|
|
clear_bit(BRCMF_VIF_STATUS_AP_CREATED, &ifp->vif->sme_state);
|
|
brcmf_net_setcarrier(ifp, false);
|
|
|
|
return err;
|
|
}
|
|
|
|
static s32
|
|
brcmf_cfg80211_change_beacon(struct wiphy *wiphy, struct net_device *ndev,
|
|
struct cfg80211_beacon_data *info)
|
|
{
|
|
struct brcmf_if *ifp = netdev_priv(ndev);
|
|
|
|
brcmf_dbg(TRACE, "Enter\n");
|
|
|
|
return brcmf_config_ap_mgmt_ie(ifp->vif, info);
|
|
}
|
|
|
|
static int
|
|
brcmf_cfg80211_del_station(struct wiphy *wiphy, struct net_device *ndev,
|
|
struct station_del_parameters *params)
|
|
{
|
|
struct brcmf_cfg80211_info *cfg = wiphy_to_cfg(wiphy);
|
|
struct brcmf_pub *drvr = cfg->pub;
|
|
struct brcmf_scb_val_le scbval;
|
|
struct brcmf_if *ifp = netdev_priv(ndev);
|
|
s32 err;
|
|
|
|
if (!params->mac)
|
|
return -EFAULT;
|
|
|
|
brcmf_dbg(TRACE, "Enter %pM\n", params->mac);
|
|
|
|
if (ifp->vif == cfg->p2p.bss_idx[P2PAPI_BSSCFG_DEVICE].vif)
|
|
ifp = cfg->p2p.bss_idx[P2PAPI_BSSCFG_PRIMARY].vif->ifp;
|
|
if (!check_vif_up(ifp->vif))
|
|
return -EIO;
|
|
|
|
memcpy(&scbval.ea, params->mac, ETH_ALEN);
|
|
scbval.val = cpu_to_le32(params->reason_code);
|
|
err = brcmf_fil_cmd_data_set(ifp, BRCMF_C_SCB_DEAUTHENTICATE_FOR_REASON,
|
|
&scbval, sizeof(scbval));
|
|
if (err)
|
|
bphy_err(drvr, "SCB_DEAUTHENTICATE_FOR_REASON failed %d\n",
|
|
err);
|
|
|
|
brcmf_dbg(TRACE, "Exit\n");
|
|
return err;
|
|
}
|
|
|
|
static int
|
|
brcmf_cfg80211_change_station(struct wiphy *wiphy, struct net_device *ndev,
|
|
const u8 *mac, struct station_parameters *params)
|
|
{
|
|
struct brcmf_cfg80211_info *cfg = wiphy_to_cfg(wiphy);
|
|
struct brcmf_pub *drvr = cfg->pub;
|
|
struct brcmf_if *ifp = netdev_priv(ndev);
|
|
s32 err;
|
|
|
|
brcmf_dbg(TRACE, "Enter, MAC %pM, mask 0x%04x set 0x%04x\n", mac,
|
|
params->sta_flags_mask, params->sta_flags_set);
|
|
|
|
/* Ignore all 00 MAC */
|
|
if (is_zero_ether_addr(mac))
|
|
return 0;
|
|
|
|
if (!(params->sta_flags_mask & BIT(NL80211_STA_FLAG_AUTHORIZED)))
|
|
return 0;
|
|
|
|
if (params->sta_flags_set & BIT(NL80211_STA_FLAG_AUTHORIZED))
|
|
err = brcmf_fil_cmd_data_set(ifp, BRCMF_C_SET_SCB_AUTHORIZE,
|
|
(void *)mac, ETH_ALEN);
|
|
else
|
|
err = brcmf_fil_cmd_data_set(ifp, BRCMF_C_SET_SCB_DEAUTHORIZE,
|
|
(void *)mac, ETH_ALEN);
|
|
if (err < 0)
|
|
bphy_err(drvr, "Setting SCB (de-)authorize failed, %d\n", err);
|
|
|
|
return err;
|
|
}
|
|
|
|
static void
|
|
brcmf_cfg80211_update_mgmt_frame_registrations(struct wiphy *wiphy,
|
|
struct wireless_dev *wdev,
|
|
struct mgmt_frame_regs *upd)
|
|
{
|
|
struct brcmf_cfg80211_vif *vif;
|
|
|
|
vif = container_of(wdev, struct brcmf_cfg80211_vif, wdev);
|
|
|
|
vif->mgmt_rx_reg = upd->interface_stypes;
|
|
}
|
|
|
|
|
|
static int
|
|
brcmf_cfg80211_mgmt_tx(struct wiphy *wiphy, struct wireless_dev *wdev,
|
|
struct cfg80211_mgmt_tx_params *params, u64 *cookie)
|
|
{
|
|
struct brcmf_cfg80211_info *cfg = wiphy_to_cfg(wiphy);
|
|
struct ieee80211_channel *chan = params->chan;
|
|
struct brcmf_pub *drvr = cfg->pub;
|
|
const u8 *buf = params->buf;
|
|
size_t len = params->len;
|
|
const struct ieee80211_mgmt *mgmt;
|
|
struct brcmf_cfg80211_vif *vif;
|
|
s32 err = 0;
|
|
s32 ie_offset;
|
|
s32 ie_len;
|
|
struct brcmf_fil_action_frame_le *action_frame;
|
|
struct brcmf_fil_af_params_le *af_params;
|
|
bool ack;
|
|
s32 chan_nr;
|
|
u32 freq;
|
|
|
|
brcmf_dbg(TRACE, "Enter\n");
|
|
|
|
*cookie = 0;
|
|
|
|
mgmt = (const struct ieee80211_mgmt *)buf;
|
|
|
|
if (!ieee80211_is_mgmt(mgmt->frame_control)) {
|
|
bphy_err(drvr, "Driver only allows MGMT packet type\n");
|
|
return -EPERM;
|
|
}
|
|
|
|
vif = container_of(wdev, struct brcmf_cfg80211_vif, wdev);
|
|
|
|
if (ieee80211_is_probe_resp(mgmt->frame_control)) {
|
|
/* Right now the only reason to get a probe response */
|
|
/* is for p2p listen response or for p2p GO from */
|
|
/* wpa_supplicant. Unfortunately the probe is send */
|
|
/* on primary ndev, while dongle wants it on the p2p */
|
|
/* vif. Since this is only reason for a probe */
|
|
/* response to be sent, the vif is taken from cfg. */
|
|
/* If ever desired to send proberesp for non p2p */
|
|
/* response then data should be checked for */
|
|
/* "DIRECT-". Note in future supplicant will take */
|
|
/* dedicated p2p wdev to do this and then this 'hack'*/
|
|
/* is not needed anymore. */
|
|
ie_offset = DOT11_MGMT_HDR_LEN +
|
|
DOT11_BCN_PRB_FIXED_LEN;
|
|
ie_len = len - ie_offset;
|
|
if (vif == cfg->p2p.bss_idx[P2PAPI_BSSCFG_PRIMARY].vif)
|
|
vif = cfg->p2p.bss_idx[P2PAPI_BSSCFG_DEVICE].vif;
|
|
err = brcmf_vif_set_mgmt_ie(vif,
|
|
BRCMF_VNDR_IE_PRBRSP_FLAG,
|
|
&buf[ie_offset],
|
|
ie_len);
|
|
cfg80211_mgmt_tx_status(wdev, *cookie, buf, len, true,
|
|
GFP_KERNEL);
|
|
} else if (ieee80211_is_action(mgmt->frame_control)) {
|
|
if (len > BRCMF_FIL_ACTION_FRAME_SIZE + DOT11_MGMT_HDR_LEN) {
|
|
bphy_err(drvr, "invalid action frame length\n");
|
|
err = -EINVAL;
|
|
goto exit;
|
|
}
|
|
af_params = kzalloc(sizeof(*af_params), GFP_KERNEL);
|
|
if (af_params == NULL) {
|
|
bphy_err(drvr, "unable to allocate frame\n");
|
|
err = -ENOMEM;
|
|
goto exit;
|
|
}
|
|
action_frame = &af_params->action_frame;
|
|
/* Add the packet Id */
|
|
action_frame->packet_id = cpu_to_le32(*cookie);
|
|
/* Add BSSID */
|
|
memcpy(&action_frame->da[0], &mgmt->da[0], ETH_ALEN);
|
|
memcpy(&af_params->bssid[0], &mgmt->bssid[0], ETH_ALEN);
|
|
/* Add the length exepted for 802.11 header */
|
|
action_frame->len = cpu_to_le16(len - DOT11_MGMT_HDR_LEN);
|
|
/* Add the channel. Use the one specified as parameter if any or
|
|
* the current one (got from the firmware) otherwise
|
|
*/
|
|
if (chan)
|
|
freq = chan->center_freq;
|
|
else
|
|
brcmf_fil_cmd_int_get(vif->ifp, BRCMF_C_GET_CHANNEL,
|
|
&freq);
|
|
chan_nr = ieee80211_frequency_to_channel(freq);
|
|
af_params->channel = cpu_to_le32(chan_nr);
|
|
af_params->dwell_time = cpu_to_le32(params->wait);
|
|
memcpy(action_frame->data, &buf[DOT11_MGMT_HDR_LEN],
|
|
le16_to_cpu(action_frame->len));
|
|
|
|
brcmf_dbg(TRACE, "Action frame, cookie=%lld, len=%d, freq=%d\n",
|
|
*cookie, le16_to_cpu(action_frame->len), freq);
|
|
|
|
ack = brcmf_p2p_send_action_frame(cfg, cfg_to_ndev(cfg),
|
|
af_params);
|
|
|
|
cfg80211_mgmt_tx_status(wdev, *cookie, buf, len, ack,
|
|
GFP_KERNEL);
|
|
kfree(af_params);
|
|
} else {
|
|
brcmf_dbg(TRACE, "Unhandled, fc=%04x!!\n", mgmt->frame_control);
|
|
brcmf_dbg_hex_dump(true, buf, len, "payload, len=%zu\n", len);
|
|
}
|
|
|
|
exit:
|
|
return err;
|
|
}
|
|
|
|
static int brcmf_cfg80211_set_cqm_rssi_range_config(struct wiphy *wiphy,
|
|
struct net_device *ndev,
|
|
s32 rssi_low, s32 rssi_high)
|
|
{
|
|
struct brcmf_cfg80211_vif *vif;
|
|
struct brcmf_if *ifp;
|
|
int err = 0;
|
|
|
|
brcmf_dbg(TRACE, "low=%d high=%d", rssi_low, rssi_high);
|
|
|
|
ifp = netdev_priv(ndev);
|
|
vif = ifp->vif;
|
|
|
|
if (rssi_low != vif->cqm_rssi_low || rssi_high != vif->cqm_rssi_high) {
|
|
/* The firmware will send an event when the RSSI is less than or
|
|
* equal to a configured level and the previous RSSI event was
|
|
* less than or equal to a different level. Set a third level
|
|
* so that we also detect the transition from rssi <= rssi_high
|
|
* to rssi > rssi_high.
|
|
*/
|
|
struct brcmf_rssi_event_le config = {
|
|
.rate_limit_msec = cpu_to_le32(0),
|
|
.rssi_level_num = 3,
|
|
.rssi_levels = {
|
|
clamp_val(rssi_low, S8_MIN, S8_MAX - 2),
|
|
clamp_val(rssi_high, S8_MIN + 1, S8_MAX - 1),
|
|
S8_MAX,
|
|
},
|
|
};
|
|
|
|
err = brcmf_fil_iovar_data_set(ifp, "rssi_event", &config,
|
|
sizeof(config));
|
|
if (err) {
|
|
err = -EINVAL;
|
|
} else {
|
|
vif->cqm_rssi_low = rssi_low;
|
|
vif->cqm_rssi_high = rssi_high;
|
|
}
|
|
}
|
|
|
|
return err;
|
|
}
|
|
|
|
static int
|
|
brcmf_cfg80211_cancel_remain_on_channel(struct wiphy *wiphy,
|
|
struct wireless_dev *wdev,
|
|
u64 cookie)
|
|
{
|
|
struct brcmf_cfg80211_info *cfg = wiphy_to_cfg(wiphy);
|
|
struct brcmf_pub *drvr = cfg->pub;
|
|
struct brcmf_cfg80211_vif *vif;
|
|
int err = 0;
|
|
|
|
brcmf_dbg(TRACE, "Enter p2p listen cancel\n");
|
|
|
|
vif = cfg->p2p.bss_idx[P2PAPI_BSSCFG_DEVICE].vif;
|
|
if (vif == NULL) {
|
|
bphy_err(drvr, "No p2p device available for probe response\n");
|
|
err = -ENODEV;
|
|
goto exit;
|
|
}
|
|
brcmf_p2p_cancel_remain_on_channel(vif->ifp);
|
|
exit:
|
|
return err;
|
|
}
|
|
|
|
static int brcmf_cfg80211_get_channel(struct wiphy *wiphy,
|
|
struct wireless_dev *wdev,
|
|
unsigned int link_id,
|
|
struct cfg80211_chan_def *chandef)
|
|
{
|
|
struct brcmf_cfg80211_info *cfg = wiphy_to_cfg(wiphy);
|
|
struct net_device *ndev = wdev->netdev;
|
|
struct brcmf_pub *drvr = cfg->pub;
|
|
struct brcmu_chan ch;
|
|
enum nl80211_band band = 0;
|
|
enum nl80211_chan_width width = 0;
|
|
u32 chanspec;
|
|
int freq, err;
|
|
|
|
if (!ndev || drvr->bus_if->state != BRCMF_BUS_UP)
|
|
return -ENODEV;
|
|
|
|
err = brcmf_fil_iovar_int_get(netdev_priv(ndev), "chanspec", &chanspec);
|
|
if (err) {
|
|
bphy_err(drvr, "chanspec failed (%d)\n", err);
|
|
return err;
|
|
}
|
|
|
|
ch.chspec = chanspec;
|
|
cfg->d11inf.decchspec(&ch);
|
|
|
|
switch (ch.band) {
|
|
case BRCMU_CHAN_BAND_2G:
|
|
band = NL80211_BAND_2GHZ;
|
|
break;
|
|
case BRCMU_CHAN_BAND_5G:
|
|
band = NL80211_BAND_5GHZ;
|
|
break;
|
|
}
|
|
|
|
switch (ch.bw) {
|
|
case BRCMU_CHAN_BW_80:
|
|
width = NL80211_CHAN_WIDTH_80;
|
|
break;
|
|
case BRCMU_CHAN_BW_40:
|
|
width = NL80211_CHAN_WIDTH_40;
|
|
break;
|
|
case BRCMU_CHAN_BW_20:
|
|
width = NL80211_CHAN_WIDTH_20;
|
|
break;
|
|
case BRCMU_CHAN_BW_80P80:
|
|
width = NL80211_CHAN_WIDTH_80P80;
|
|
break;
|
|
case BRCMU_CHAN_BW_160:
|
|
width = NL80211_CHAN_WIDTH_160;
|
|
break;
|
|
}
|
|
|
|
freq = ieee80211_channel_to_frequency(ch.control_ch_num, band);
|
|
chandef->chan = ieee80211_get_channel(wiphy, freq);
|
|
chandef->width = width;
|
|
chandef->center_freq1 = ieee80211_channel_to_frequency(ch.chnum, band);
|
|
chandef->center_freq2 = 0;
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int brcmf_cfg80211_crit_proto_start(struct wiphy *wiphy,
|
|
struct wireless_dev *wdev,
|
|
enum nl80211_crit_proto_id proto,
|
|
u16 duration)
|
|
{
|
|
struct brcmf_cfg80211_info *cfg = wiphy_to_cfg(wiphy);
|
|
struct brcmf_cfg80211_vif *vif;
|
|
|
|
vif = container_of(wdev, struct brcmf_cfg80211_vif, wdev);
|
|
|
|
/* only DHCP support for now */
|
|
if (proto != NL80211_CRIT_PROTO_DHCP)
|
|
return -EINVAL;
|
|
|
|
/* suppress and abort scanning */
|
|
set_bit(BRCMF_SCAN_STATUS_SUPPRESS, &cfg->scan_status);
|
|
brcmf_abort_scanning(cfg);
|
|
|
|
return brcmf_btcoex_set_mode(vif, BRCMF_BTCOEX_DISABLED, duration);
|
|
}
|
|
|
|
static void brcmf_cfg80211_crit_proto_stop(struct wiphy *wiphy,
|
|
struct wireless_dev *wdev)
|
|
{
|
|
struct brcmf_cfg80211_info *cfg = wiphy_to_cfg(wiphy);
|
|
struct brcmf_cfg80211_vif *vif;
|
|
|
|
vif = container_of(wdev, struct brcmf_cfg80211_vif, wdev);
|
|
|
|
brcmf_btcoex_set_mode(vif, BRCMF_BTCOEX_ENABLED, 0);
|
|
clear_bit(BRCMF_SCAN_STATUS_SUPPRESS, &cfg->scan_status);
|
|
}
|
|
|
|
static s32
|
|
brcmf_notify_tdls_peer_event(struct brcmf_if *ifp,
|
|
const struct brcmf_event_msg *e, void *data)
|
|
{
|
|
switch (e->reason) {
|
|
case BRCMF_E_REASON_TDLS_PEER_DISCOVERED:
|
|
brcmf_dbg(TRACE, "TDLS Peer Discovered\n");
|
|
break;
|
|
case BRCMF_E_REASON_TDLS_PEER_CONNECTED:
|
|
brcmf_dbg(TRACE, "TDLS Peer Connected\n");
|
|
brcmf_proto_add_tdls_peer(ifp->drvr, ifp->ifidx, (u8 *)e->addr);
|
|
break;
|
|
case BRCMF_E_REASON_TDLS_PEER_DISCONNECTED:
|
|
brcmf_dbg(TRACE, "TDLS Peer Disconnected\n");
|
|
brcmf_proto_delete_peer(ifp->drvr, ifp->ifidx, (u8 *)e->addr);
|
|
break;
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int brcmf_convert_nl80211_tdls_oper(enum nl80211_tdls_operation oper)
|
|
{
|
|
int ret;
|
|
|
|
switch (oper) {
|
|
case NL80211_TDLS_DISCOVERY_REQ:
|
|
ret = BRCMF_TDLS_MANUAL_EP_DISCOVERY;
|
|
break;
|
|
case NL80211_TDLS_SETUP:
|
|
ret = BRCMF_TDLS_MANUAL_EP_CREATE;
|
|
break;
|
|
case NL80211_TDLS_TEARDOWN:
|
|
ret = BRCMF_TDLS_MANUAL_EP_DELETE;
|
|
break;
|
|
default:
|
|
brcmf_err("unsupported operation: %d\n", oper);
|
|
ret = -EOPNOTSUPP;
|
|
}
|
|
return ret;
|
|
}
|
|
|
|
static int brcmf_cfg80211_tdls_oper(struct wiphy *wiphy,
|
|
struct net_device *ndev, const u8 *peer,
|
|
enum nl80211_tdls_operation oper)
|
|
{
|
|
struct brcmf_cfg80211_info *cfg = wiphy_to_cfg(wiphy);
|
|
struct brcmf_pub *drvr = cfg->pub;
|
|
struct brcmf_if *ifp;
|
|
struct brcmf_tdls_iovar_le info;
|
|
int ret = 0;
|
|
|
|
ret = brcmf_convert_nl80211_tdls_oper(oper);
|
|
if (ret < 0)
|
|
return ret;
|
|
|
|
ifp = netdev_priv(ndev);
|
|
memset(&info, 0, sizeof(info));
|
|
info.mode = (u8)ret;
|
|
if (peer)
|
|
memcpy(info.ea, peer, ETH_ALEN);
|
|
|
|
ret = brcmf_fil_iovar_data_set(ifp, "tdls_endpoint",
|
|
&info, sizeof(info));
|
|
if (ret < 0)
|
|
bphy_err(drvr, "tdls_endpoint iovar failed: ret=%d\n", ret);
|
|
|
|
return ret;
|
|
}
|
|
|
|
static int
|
|
brcmf_cfg80211_update_conn_params(struct wiphy *wiphy,
|
|
struct net_device *ndev,
|
|
struct cfg80211_connect_params *sme,
|
|
u32 changed)
|
|
{
|
|
struct brcmf_cfg80211_info *cfg = wiphy_to_cfg(wiphy);
|
|
struct brcmf_pub *drvr = cfg->pub;
|
|
struct brcmf_if *ifp;
|
|
int err;
|
|
|
|
if (!(changed & UPDATE_ASSOC_IES))
|
|
return 0;
|
|
|
|
ifp = netdev_priv(ndev);
|
|
err = brcmf_vif_set_mgmt_ie(ifp->vif, BRCMF_VNDR_IE_ASSOCREQ_FLAG,
|
|
sme->ie, sme->ie_len);
|
|
if (err)
|
|
bphy_err(drvr, "Set Assoc REQ IE Failed\n");
|
|
else
|
|
brcmf_dbg(TRACE, "Applied Vndr IEs for Assoc request\n");
|
|
|
|
return err;
|
|
}
|
|
|
|
#ifdef CONFIG_PM
|
|
static int
|
|
brcmf_cfg80211_set_rekey_data(struct wiphy *wiphy, struct net_device *ndev,
|
|
struct cfg80211_gtk_rekey_data *gtk)
|
|
{
|
|
struct brcmf_cfg80211_info *cfg = wiphy_to_cfg(wiphy);
|
|
struct brcmf_pub *drvr = cfg->pub;
|
|
struct brcmf_if *ifp = netdev_priv(ndev);
|
|
struct brcmf_gtk_keyinfo_le gtk_le;
|
|
int ret;
|
|
|
|
brcmf_dbg(TRACE, "Enter, bssidx=%d\n", ifp->bsscfgidx);
|
|
|
|
memcpy(gtk_le.kck, gtk->kck, sizeof(gtk_le.kck));
|
|
memcpy(gtk_le.kek, gtk->kek, sizeof(gtk_le.kek));
|
|
memcpy(gtk_le.replay_counter, gtk->replay_ctr,
|
|
sizeof(gtk_le.replay_counter));
|
|
|
|
ret = brcmf_fil_iovar_data_set(ifp, "gtk_key_info", >k_le,
|
|
sizeof(gtk_le));
|
|
if (ret < 0)
|
|
bphy_err(drvr, "gtk_key_info iovar failed: ret=%d\n", ret);
|
|
|
|
return ret;
|
|
}
|
|
#endif
|
|
|
|
static int brcmf_cfg80211_set_pmk(struct wiphy *wiphy, struct net_device *dev,
|
|
const struct cfg80211_pmk_conf *conf)
|
|
{
|
|
struct brcmf_if *ifp;
|
|
|
|
brcmf_dbg(TRACE, "enter\n");
|
|
|
|
/* expect using firmware supplicant for 1X */
|
|
ifp = netdev_priv(dev);
|
|
if (WARN_ON(ifp->vif->profile.use_fwsup != BRCMF_PROFILE_FWSUP_1X))
|
|
return -EINVAL;
|
|
|
|
if (conf->pmk_len > BRCMF_WSEC_MAX_PSK_LEN)
|
|
return -ERANGE;
|
|
|
|
return brcmf_set_pmk(ifp, conf->pmk, conf->pmk_len);
|
|
}
|
|
|
|
static int brcmf_cfg80211_del_pmk(struct wiphy *wiphy, struct net_device *dev,
|
|
const u8 *aa)
|
|
{
|
|
struct brcmf_if *ifp;
|
|
|
|
brcmf_dbg(TRACE, "enter\n");
|
|
ifp = netdev_priv(dev);
|
|
if (WARN_ON(ifp->vif->profile.use_fwsup != BRCMF_PROFILE_FWSUP_1X))
|
|
return -EINVAL;
|
|
|
|
return brcmf_set_pmk(ifp, NULL, 0);
|
|
}
|
|
|
|
static struct cfg80211_ops brcmf_cfg80211_ops = {
|
|
.add_virtual_intf = brcmf_cfg80211_add_iface,
|
|
.del_virtual_intf = brcmf_cfg80211_del_iface,
|
|
.change_virtual_intf = brcmf_cfg80211_change_iface,
|
|
.scan = brcmf_cfg80211_scan,
|
|
.set_wiphy_params = brcmf_cfg80211_set_wiphy_params,
|
|
.join_ibss = brcmf_cfg80211_join_ibss,
|
|
.leave_ibss = brcmf_cfg80211_leave_ibss,
|
|
.get_station = brcmf_cfg80211_get_station,
|
|
.dump_station = brcmf_cfg80211_dump_station,
|
|
.set_tx_power = brcmf_cfg80211_set_tx_power,
|
|
.get_tx_power = brcmf_cfg80211_get_tx_power,
|
|
.add_key = brcmf_cfg80211_add_key,
|
|
.del_key = brcmf_cfg80211_del_key,
|
|
.get_key = brcmf_cfg80211_get_key,
|
|
.set_default_key = brcmf_cfg80211_config_default_key,
|
|
.set_default_mgmt_key = brcmf_cfg80211_config_default_mgmt_key,
|
|
.set_power_mgmt = brcmf_cfg80211_set_power_mgmt,
|
|
.connect = brcmf_cfg80211_connect,
|
|
.disconnect = brcmf_cfg80211_disconnect,
|
|
.suspend = brcmf_cfg80211_suspend,
|
|
.resume = brcmf_cfg80211_resume,
|
|
.set_pmksa = brcmf_cfg80211_set_pmksa,
|
|
.del_pmksa = brcmf_cfg80211_del_pmksa,
|
|
.flush_pmksa = brcmf_cfg80211_flush_pmksa,
|
|
.start_ap = brcmf_cfg80211_start_ap,
|
|
.stop_ap = brcmf_cfg80211_stop_ap,
|
|
.change_beacon = brcmf_cfg80211_change_beacon,
|
|
.del_station = brcmf_cfg80211_del_station,
|
|
.change_station = brcmf_cfg80211_change_station,
|
|
.sched_scan_start = brcmf_cfg80211_sched_scan_start,
|
|
.sched_scan_stop = brcmf_cfg80211_sched_scan_stop,
|
|
.update_mgmt_frame_registrations =
|
|
brcmf_cfg80211_update_mgmt_frame_registrations,
|
|
.mgmt_tx = brcmf_cfg80211_mgmt_tx,
|
|
.set_cqm_rssi_range_config = brcmf_cfg80211_set_cqm_rssi_range_config,
|
|
.remain_on_channel = brcmf_p2p_remain_on_channel,
|
|
.cancel_remain_on_channel = brcmf_cfg80211_cancel_remain_on_channel,
|
|
.get_channel = brcmf_cfg80211_get_channel,
|
|
.start_p2p_device = brcmf_p2p_start_device,
|
|
.stop_p2p_device = brcmf_p2p_stop_device,
|
|
.crit_proto_start = brcmf_cfg80211_crit_proto_start,
|
|
.crit_proto_stop = brcmf_cfg80211_crit_proto_stop,
|
|
.tdls_oper = brcmf_cfg80211_tdls_oper,
|
|
.update_connect_params = brcmf_cfg80211_update_conn_params,
|
|
.set_pmk = brcmf_cfg80211_set_pmk,
|
|
.del_pmk = brcmf_cfg80211_del_pmk,
|
|
};
|
|
|
|
struct cfg80211_ops *brcmf_cfg80211_get_ops(struct brcmf_mp_device *settings)
|
|
{
|
|
struct cfg80211_ops *ops;
|
|
|
|
ops = kmemdup(&brcmf_cfg80211_ops, sizeof(brcmf_cfg80211_ops),
|
|
GFP_KERNEL);
|
|
|
|
if (ops && settings->roamoff)
|
|
ops->update_connect_params = NULL;
|
|
|
|
return ops;
|
|
}
|
|
|
|
struct brcmf_cfg80211_vif *brcmf_alloc_vif(struct brcmf_cfg80211_info *cfg,
|
|
enum nl80211_iftype type)
|
|
{
|
|
struct brcmf_cfg80211_vif *vif_walk;
|
|
struct brcmf_cfg80211_vif *vif;
|
|
bool mbss;
|
|
struct brcmf_if *ifp = brcmf_get_ifp(cfg->pub, 0);
|
|
|
|
brcmf_dbg(TRACE, "allocating virtual interface (size=%zu)\n",
|
|
sizeof(*vif));
|
|
vif = kzalloc(sizeof(*vif), GFP_KERNEL);
|
|
if (!vif)
|
|
return ERR_PTR(-ENOMEM);
|
|
|
|
vif->wdev.wiphy = cfg->wiphy;
|
|
vif->wdev.iftype = type;
|
|
|
|
brcmf_init_prof(&vif->profile);
|
|
|
|
if (type == NL80211_IFTYPE_AP &&
|
|
brcmf_feat_is_enabled(ifp, BRCMF_FEAT_MBSS)) {
|
|
mbss = false;
|
|
list_for_each_entry(vif_walk, &cfg->vif_list, list) {
|
|
if (vif_walk->wdev.iftype == NL80211_IFTYPE_AP) {
|
|
mbss = true;
|
|
break;
|
|
}
|
|
}
|
|
vif->mbss = mbss;
|
|
}
|
|
|
|
list_add_tail(&vif->list, &cfg->vif_list);
|
|
return vif;
|
|
}
|
|
|
|
void brcmf_free_vif(struct brcmf_cfg80211_vif *vif)
|
|
{
|
|
list_del(&vif->list);
|
|
kfree(vif);
|
|
}
|
|
|
|
void brcmf_cfg80211_free_netdev(struct net_device *ndev)
|
|
{
|
|
struct brcmf_cfg80211_vif *vif;
|
|
struct brcmf_if *ifp;
|
|
|
|
ifp = netdev_priv(ndev);
|
|
vif = ifp->vif;
|
|
|
|
if (vif)
|
|
brcmf_free_vif(vif);
|
|
}
|
|
|
|
static bool brcmf_is_linkup(struct brcmf_cfg80211_vif *vif,
|
|
const struct brcmf_event_msg *e)
|
|
{
|
|
u32 event = e->event_code;
|
|
u32 status = e->status;
|
|
|
|
if ((vif->profile.use_fwsup == BRCMF_PROFILE_FWSUP_PSK ||
|
|
vif->profile.use_fwsup == BRCMF_PROFILE_FWSUP_SAE) &&
|
|
event == BRCMF_E_PSK_SUP &&
|
|
status == BRCMF_E_STATUS_FWSUP_COMPLETED)
|
|
set_bit(BRCMF_VIF_STATUS_EAP_SUCCESS, &vif->sme_state);
|
|
if (event == BRCMF_E_SET_SSID && status == BRCMF_E_STATUS_SUCCESS) {
|
|
brcmf_dbg(CONN, "Processing set ssid\n");
|
|
memcpy(vif->profile.bssid, e->addr, ETH_ALEN);
|
|
if (vif->profile.use_fwsup != BRCMF_PROFILE_FWSUP_PSK &&
|
|
vif->profile.use_fwsup != BRCMF_PROFILE_FWSUP_SAE)
|
|
return true;
|
|
|
|
set_bit(BRCMF_VIF_STATUS_ASSOC_SUCCESS, &vif->sme_state);
|
|
}
|
|
|
|
if (test_bit(BRCMF_VIF_STATUS_EAP_SUCCESS, &vif->sme_state) &&
|
|
test_bit(BRCMF_VIF_STATUS_ASSOC_SUCCESS, &vif->sme_state)) {
|
|
clear_bit(BRCMF_VIF_STATUS_EAP_SUCCESS, &vif->sme_state);
|
|
clear_bit(BRCMF_VIF_STATUS_ASSOC_SUCCESS, &vif->sme_state);
|
|
return true;
|
|
}
|
|
return false;
|
|
}
|
|
|
|
static bool brcmf_is_linkdown(struct brcmf_cfg80211_vif *vif,
|
|
const struct brcmf_event_msg *e)
|
|
{
|
|
u32 event = e->event_code;
|
|
u16 flags = e->flags;
|
|
|
|
if ((event == BRCMF_E_DEAUTH) || (event == BRCMF_E_DEAUTH_IND) ||
|
|
(event == BRCMF_E_DISASSOC_IND) ||
|
|
((event == BRCMF_E_LINK) && (!(flags & BRCMF_EVENT_MSG_LINK)))) {
|
|
brcmf_dbg(CONN, "Processing link down\n");
|
|
clear_bit(BRCMF_VIF_STATUS_EAP_SUCCESS, &vif->sme_state);
|
|
clear_bit(BRCMF_VIF_STATUS_ASSOC_SUCCESS, &vif->sme_state);
|
|
return true;
|
|
}
|
|
return false;
|
|
}
|
|
|
|
static bool brcmf_is_nonetwork(struct brcmf_cfg80211_info *cfg,
|
|
const struct brcmf_event_msg *e)
|
|
{
|
|
u32 event = e->event_code;
|
|
u32 status = e->status;
|
|
|
|
if (event == BRCMF_E_LINK && status == BRCMF_E_STATUS_NO_NETWORKS) {
|
|
brcmf_dbg(CONN, "Processing Link %s & no network found\n",
|
|
e->flags & BRCMF_EVENT_MSG_LINK ? "up" : "down");
|
|
return true;
|
|
}
|
|
|
|
if (event == BRCMF_E_SET_SSID && status != BRCMF_E_STATUS_SUCCESS) {
|
|
brcmf_dbg(CONN, "Processing connecting & no network found\n");
|
|
return true;
|
|
}
|
|
|
|
if (event == BRCMF_E_PSK_SUP &&
|
|
status != BRCMF_E_STATUS_FWSUP_COMPLETED) {
|
|
brcmf_dbg(CONN, "Processing failed supplicant state: %u\n",
|
|
status);
|
|
return true;
|
|
}
|
|
|
|
return false;
|
|
}
|
|
|
|
static void brcmf_clear_assoc_ies(struct brcmf_cfg80211_info *cfg)
|
|
{
|
|
struct brcmf_cfg80211_connect_info *conn_info = cfg_to_conn(cfg);
|
|
|
|
kfree(conn_info->req_ie);
|
|
conn_info->req_ie = NULL;
|
|
conn_info->req_ie_len = 0;
|
|
kfree(conn_info->resp_ie);
|
|
conn_info->resp_ie = NULL;
|
|
conn_info->resp_ie_len = 0;
|
|
}
|
|
|
|
u8 brcmf_map_prio_to_prec(void *config, u8 prio)
|
|
{
|
|
struct brcmf_cfg80211_info *cfg = (struct brcmf_cfg80211_info *)config;
|
|
|
|
if (!cfg)
|
|
return (prio == PRIO_8021D_NONE || prio == PRIO_8021D_BE) ?
|
|
(prio ^ 2) : prio;
|
|
|
|
/* For those AC(s) with ACM flag set to 1, convert its 4-level priority
|
|
* to an 8-level precedence which is the same as BE's
|
|
*/
|
|
if (prio > PRIO_8021D_EE &&
|
|
cfg->ac_priority[prio] == cfg->ac_priority[PRIO_8021D_BE])
|
|
return cfg->ac_priority[prio] * 2;
|
|
|
|
/* Conversion of 4-level priority to 8-level precedence */
|
|
if (prio == PRIO_8021D_BE || prio == PRIO_8021D_BK ||
|
|
prio == PRIO_8021D_CL || prio == PRIO_8021D_VO)
|
|
return cfg->ac_priority[prio] * 2;
|
|
else
|
|
return cfg->ac_priority[prio] * 2 + 1;
|
|
}
|
|
|
|
u8 brcmf_map_prio_to_aci(void *config, u8 prio)
|
|
{
|
|
/* Prio here refers to the 802.1d priority in range of 0 to 7.
|
|
* ACI here refers to the WLAN AC Index in range of 0 to 3.
|
|
* This function will return ACI corresponding to input prio.
|
|
*/
|
|
struct brcmf_cfg80211_info *cfg = (struct brcmf_cfg80211_info *)config;
|
|
|
|
if (cfg)
|
|
return cfg->ac_priority[prio];
|
|
|
|
return prio;
|
|
}
|
|
|
|
static void brcmf_init_wmm_prio(u8 *priority)
|
|
{
|
|
/* Initialize AC priority array to default
|
|
* 802.1d priority as per following table:
|
|
* 802.1d prio 0,3 maps to BE
|
|
* 802.1d prio 1,2 maps to BK
|
|
* 802.1d prio 4,5 maps to VI
|
|
* 802.1d prio 6,7 maps to VO
|
|
*/
|
|
priority[0] = BRCMF_FWS_FIFO_AC_BE;
|
|
priority[3] = BRCMF_FWS_FIFO_AC_BE;
|
|
priority[1] = BRCMF_FWS_FIFO_AC_BK;
|
|
priority[2] = BRCMF_FWS_FIFO_AC_BK;
|
|
priority[4] = BRCMF_FWS_FIFO_AC_VI;
|
|
priority[5] = BRCMF_FWS_FIFO_AC_VI;
|
|
priority[6] = BRCMF_FWS_FIFO_AC_VO;
|
|
priority[7] = BRCMF_FWS_FIFO_AC_VO;
|
|
}
|
|
|
|
static void brcmf_wifi_prioritize_acparams(const
|
|
struct brcmf_cfg80211_edcf_acparam *acp, u8 *priority)
|
|
{
|
|
u8 aci;
|
|
u8 aifsn;
|
|
u8 ecwmin;
|
|
u8 ecwmax;
|
|
u8 acm;
|
|
u8 ranking_basis[EDCF_AC_COUNT];
|
|
u8 aci_prio[EDCF_AC_COUNT]; /* AC_BE, AC_BK, AC_VI, AC_VO */
|
|
u8 index;
|
|
|
|
for (aci = 0; aci < EDCF_AC_COUNT; aci++, acp++) {
|
|
aifsn = acp->ACI & EDCF_AIFSN_MASK;
|
|
acm = (acp->ACI & EDCF_ACM_MASK) ? 1 : 0;
|
|
ecwmin = acp->ECW & EDCF_ECWMIN_MASK;
|
|
ecwmax = (acp->ECW & EDCF_ECWMAX_MASK) >> EDCF_ECWMAX_SHIFT;
|
|
brcmf_dbg(CONN, "ACI %d aifsn %d acm %d ecwmin %d ecwmax %d\n",
|
|
aci, aifsn, acm, ecwmin, ecwmax);
|
|
/* Default AC_VO will be the lowest ranking value */
|
|
ranking_basis[aci] = aifsn + ecwmin + ecwmax;
|
|
/* Initialise priority starting at 0 (AC_BE) */
|
|
aci_prio[aci] = 0;
|
|
|
|
/* If ACM is set, STA can't use this AC as per 802.11.
|
|
* Change the ranking to BE
|
|
*/
|
|
if (aci != AC_BE && aci != AC_BK && acm == 1)
|
|
ranking_basis[aci] = ranking_basis[AC_BE];
|
|
}
|
|
|
|
/* Ranking method which works for AC priority
|
|
* swapping when values for cwmin, cwmax and aifsn are varied
|
|
* Compare each aci_prio against each other aci_prio
|
|
*/
|
|
for (aci = 0; aci < EDCF_AC_COUNT; aci++) {
|
|
for (index = 0; index < EDCF_AC_COUNT; index++) {
|
|
if (index != aci) {
|
|
/* Smaller ranking value has higher priority,
|
|
* so increment priority for each ACI which has
|
|
* a higher ranking value
|
|
*/
|
|
if (ranking_basis[aci] < ranking_basis[index])
|
|
aci_prio[aci]++;
|
|
}
|
|
}
|
|
}
|
|
|
|
/* By now, aci_prio[] will be in range of 0 to 3.
|
|
* Use ACI prio to get the new priority value for
|
|
* each 802.1d traffic type, in this range.
|
|
*/
|
|
if (!(aci_prio[AC_BE] == aci_prio[AC_BK] &&
|
|
aci_prio[AC_BK] == aci_prio[AC_VI] &&
|
|
aci_prio[AC_VI] == aci_prio[AC_VO])) {
|
|
/* 802.1d 0,3 maps to BE */
|
|
priority[0] = aci_prio[AC_BE];
|
|
priority[3] = aci_prio[AC_BE];
|
|
|
|
/* 802.1d 1,2 maps to BK */
|
|
priority[1] = aci_prio[AC_BK];
|
|
priority[2] = aci_prio[AC_BK];
|
|
|
|
/* 802.1d 4,5 maps to VO */
|
|
priority[4] = aci_prio[AC_VI];
|
|
priority[5] = aci_prio[AC_VI];
|
|
|
|
/* 802.1d 6,7 maps to VO */
|
|
priority[6] = aci_prio[AC_VO];
|
|
priority[7] = aci_prio[AC_VO];
|
|
} else {
|
|
/* Initialize to default priority */
|
|
brcmf_init_wmm_prio(priority);
|
|
}
|
|
|
|
brcmf_dbg(CONN, "Adj prio BE 0->%d, BK 1->%d, BK 2->%d, BE 3->%d\n",
|
|
priority[0], priority[1], priority[2], priority[3]);
|
|
|
|
brcmf_dbg(CONN, "Adj prio VI 4->%d, VI 5->%d, VO 6->%d, VO 7->%d\n",
|
|
priority[4], priority[5], priority[6], priority[7]);
|
|
}
|
|
|
|
static s32 brcmf_get_assoc_ies(struct brcmf_cfg80211_info *cfg,
|
|
struct brcmf_if *ifp)
|
|
{
|
|
struct brcmf_pub *drvr = cfg->pub;
|
|
struct brcmf_cfg80211_assoc_ielen_le *assoc_info;
|
|
struct brcmf_cfg80211_connect_info *conn_info = cfg_to_conn(cfg);
|
|
struct brcmf_cfg80211_edcf_acparam edcf_acparam_info[EDCF_AC_COUNT];
|
|
u32 req_len;
|
|
u32 resp_len;
|
|
s32 err = 0;
|
|
|
|
brcmf_clear_assoc_ies(cfg);
|
|
|
|
err = brcmf_fil_iovar_data_get(ifp, "assoc_info",
|
|
cfg->extra_buf, WL_ASSOC_INFO_MAX);
|
|
if (err) {
|
|
bphy_err(drvr, "could not get assoc info (%d)\n", err);
|
|
return err;
|
|
}
|
|
assoc_info =
|
|
(struct brcmf_cfg80211_assoc_ielen_le *)cfg->extra_buf;
|
|
req_len = le32_to_cpu(assoc_info->req_len);
|
|
resp_len = le32_to_cpu(assoc_info->resp_len);
|
|
if (req_len > WL_EXTRA_BUF_MAX || resp_len > WL_EXTRA_BUF_MAX) {
|
|
bphy_err(drvr, "invalid lengths in assoc info: req %u resp %u\n",
|
|
req_len, resp_len);
|
|
return -EINVAL;
|
|
}
|
|
if (req_len) {
|
|
err = brcmf_fil_iovar_data_get(ifp, "assoc_req_ies",
|
|
cfg->extra_buf,
|
|
WL_ASSOC_INFO_MAX);
|
|
if (err) {
|
|
bphy_err(drvr, "could not get assoc req (%d)\n", err);
|
|
return err;
|
|
}
|
|
conn_info->req_ie_len = req_len;
|
|
conn_info->req_ie =
|
|
kmemdup(cfg->extra_buf, conn_info->req_ie_len,
|
|
GFP_KERNEL);
|
|
if (!conn_info->req_ie)
|
|
conn_info->req_ie_len = 0;
|
|
} else {
|
|
conn_info->req_ie_len = 0;
|
|
conn_info->req_ie = NULL;
|
|
}
|
|
if (resp_len) {
|
|
err = brcmf_fil_iovar_data_get(ifp, "assoc_resp_ies",
|
|
cfg->extra_buf,
|
|
WL_ASSOC_INFO_MAX);
|
|
if (err) {
|
|
bphy_err(drvr, "could not get assoc resp (%d)\n", err);
|
|
return err;
|
|
}
|
|
conn_info->resp_ie_len = resp_len;
|
|
conn_info->resp_ie =
|
|
kmemdup(cfg->extra_buf, conn_info->resp_ie_len,
|
|
GFP_KERNEL);
|
|
if (!conn_info->resp_ie)
|
|
conn_info->resp_ie_len = 0;
|
|
|
|
err = brcmf_fil_iovar_data_get(ifp, "wme_ac_sta",
|
|
edcf_acparam_info,
|
|
sizeof(edcf_acparam_info));
|
|
if (err) {
|
|
brcmf_err("could not get wme_ac_sta (%d)\n", err);
|
|
return err;
|
|
}
|
|
|
|
brcmf_wifi_prioritize_acparams(edcf_acparam_info,
|
|
cfg->ac_priority);
|
|
} else {
|
|
conn_info->resp_ie_len = 0;
|
|
conn_info->resp_ie = NULL;
|
|
}
|
|
brcmf_dbg(CONN, "req len (%d) resp len (%d)\n",
|
|
conn_info->req_ie_len, conn_info->resp_ie_len);
|
|
|
|
return err;
|
|
}
|
|
|
|
static s32
|
|
brcmf_bss_roaming_done(struct brcmf_cfg80211_info *cfg,
|
|
struct net_device *ndev,
|
|
const struct brcmf_event_msg *e)
|
|
{
|
|
struct brcmf_if *ifp = netdev_priv(ndev);
|
|
struct brcmf_cfg80211_profile *profile = &ifp->vif->profile;
|
|
struct brcmf_cfg80211_connect_info *conn_info = cfg_to_conn(cfg);
|
|
struct wiphy *wiphy = cfg_to_wiphy(cfg);
|
|
struct ieee80211_channel *notify_channel = NULL;
|
|
struct ieee80211_supported_band *band;
|
|
struct brcmf_bss_info_le *bi;
|
|
struct brcmu_chan ch;
|
|
struct cfg80211_roam_info roam_info = {};
|
|
u32 freq;
|
|
s32 err = 0;
|
|
u8 *buf;
|
|
|
|
brcmf_dbg(TRACE, "Enter\n");
|
|
|
|
brcmf_get_assoc_ies(cfg, ifp);
|
|
memcpy(profile->bssid, e->addr, ETH_ALEN);
|
|
brcmf_update_bss_info(cfg, ifp);
|
|
|
|
buf = kzalloc(WL_BSS_INFO_MAX, GFP_KERNEL);
|
|
if (buf == NULL) {
|
|
err = -ENOMEM;
|
|
goto done;
|
|
}
|
|
|
|
/* data sent to dongle has to be little endian */
|
|
*(__le32 *)buf = cpu_to_le32(WL_BSS_INFO_MAX);
|
|
err = brcmf_fil_cmd_data_get(ifp, BRCMF_C_GET_BSS_INFO,
|
|
buf, WL_BSS_INFO_MAX);
|
|
|
|
if (err)
|
|
goto done;
|
|
|
|
bi = (struct brcmf_bss_info_le *)(buf + 4);
|
|
ch.chspec = le16_to_cpu(bi->chanspec);
|
|
cfg->d11inf.decchspec(&ch);
|
|
|
|
if (ch.band == BRCMU_CHAN_BAND_2G)
|
|
band = wiphy->bands[NL80211_BAND_2GHZ];
|
|
else
|
|
band = wiphy->bands[NL80211_BAND_5GHZ];
|
|
|
|
freq = ieee80211_channel_to_frequency(ch.control_ch_num, band->band);
|
|
notify_channel = ieee80211_get_channel(wiphy, freq);
|
|
|
|
done:
|
|
kfree(buf);
|
|
|
|
roam_info.links[0].channel = notify_channel;
|
|
roam_info.links[0].bssid = profile->bssid;
|
|
roam_info.req_ie = conn_info->req_ie;
|
|
roam_info.req_ie_len = conn_info->req_ie_len;
|
|
roam_info.resp_ie = conn_info->resp_ie;
|
|
roam_info.resp_ie_len = conn_info->resp_ie_len;
|
|
|
|
cfg80211_roamed(ndev, &roam_info, GFP_KERNEL);
|
|
brcmf_dbg(CONN, "Report roaming result\n");
|
|
|
|
if (profile->use_fwsup == BRCMF_PROFILE_FWSUP_1X && profile->is_ft) {
|
|
cfg80211_port_authorized(ndev, profile->bssid, GFP_KERNEL);
|
|
brcmf_dbg(CONN, "Report port authorized\n");
|
|
}
|
|
|
|
set_bit(BRCMF_VIF_STATUS_CONNECTED, &ifp->vif->sme_state);
|
|
brcmf_dbg(TRACE, "Exit\n");
|
|
return err;
|
|
}
|
|
|
|
static s32
|
|
brcmf_bss_connect_done(struct brcmf_cfg80211_info *cfg,
|
|
struct net_device *ndev, const struct brcmf_event_msg *e,
|
|
bool completed)
|
|
{
|
|
struct brcmf_if *ifp = netdev_priv(ndev);
|
|
struct brcmf_cfg80211_profile *profile = &ifp->vif->profile;
|
|
struct brcmf_cfg80211_connect_info *conn_info = cfg_to_conn(cfg);
|
|
struct cfg80211_connect_resp_params conn_params;
|
|
|
|
brcmf_dbg(TRACE, "Enter\n");
|
|
|
|
if (test_and_clear_bit(BRCMF_VIF_STATUS_CONNECTING,
|
|
&ifp->vif->sme_state)) {
|
|
memset(&conn_params, 0, sizeof(conn_params));
|
|
if (completed) {
|
|
brcmf_get_assoc_ies(cfg, ifp);
|
|
brcmf_update_bss_info(cfg, ifp);
|
|
set_bit(BRCMF_VIF_STATUS_CONNECTED,
|
|
&ifp->vif->sme_state);
|
|
conn_params.status = WLAN_STATUS_SUCCESS;
|
|
} else {
|
|
conn_params.status = WLAN_STATUS_AUTH_TIMEOUT;
|
|
}
|
|
conn_params.links[0].bssid = profile->bssid;
|
|
conn_params.req_ie = conn_info->req_ie;
|
|
conn_params.req_ie_len = conn_info->req_ie_len;
|
|
conn_params.resp_ie = conn_info->resp_ie;
|
|
conn_params.resp_ie_len = conn_info->resp_ie_len;
|
|
cfg80211_connect_done(ndev, &conn_params, GFP_KERNEL);
|
|
brcmf_dbg(CONN, "Report connect result - connection %s\n",
|
|
completed ? "succeeded" : "failed");
|
|
}
|
|
brcmf_dbg(TRACE, "Exit\n");
|
|
return 0;
|
|
}
|
|
|
|
static s32
|
|
brcmf_notify_connect_status_ap(struct brcmf_cfg80211_info *cfg,
|
|
struct net_device *ndev,
|
|
const struct brcmf_event_msg *e, void *data)
|
|
{
|
|
struct brcmf_pub *drvr = cfg->pub;
|
|
static int generation;
|
|
u32 event = e->event_code;
|
|
u32 reason = e->reason;
|
|
struct station_info *sinfo;
|
|
|
|
brcmf_dbg(CONN, "event %s (%u), reason %d\n",
|
|
brcmf_fweh_event_name(event), event, reason);
|
|
if (event == BRCMF_E_LINK && reason == BRCMF_E_REASON_LINK_BSSCFG_DIS &&
|
|
ndev != cfg_to_ndev(cfg)) {
|
|
brcmf_dbg(CONN, "AP mode link down\n");
|
|
complete(&cfg->vif_disabled);
|
|
return 0;
|
|
}
|
|
|
|
if (((event == BRCMF_E_ASSOC_IND) || (event == BRCMF_E_REASSOC_IND)) &&
|
|
(reason == BRCMF_E_STATUS_SUCCESS)) {
|
|
if (!data) {
|
|
bphy_err(drvr, "No IEs present in ASSOC/REASSOC_IND\n");
|
|
return -EINVAL;
|
|
}
|
|
|
|
sinfo = kzalloc(sizeof(*sinfo), GFP_KERNEL);
|
|
if (!sinfo)
|
|
return -ENOMEM;
|
|
|
|
sinfo->assoc_req_ies = data;
|
|
sinfo->assoc_req_ies_len = e->datalen;
|
|
generation++;
|
|
sinfo->generation = generation;
|
|
cfg80211_new_sta(ndev, e->addr, sinfo, GFP_KERNEL);
|
|
|
|
kfree(sinfo);
|
|
} else if ((event == BRCMF_E_DISASSOC_IND) ||
|
|
(event == BRCMF_E_DEAUTH_IND) ||
|
|
(event == BRCMF_E_DEAUTH)) {
|
|
cfg80211_del_sta(ndev, e->addr, GFP_KERNEL);
|
|
}
|
|
return 0;
|
|
}
|
|
|
|
static s32
|
|
brcmf_notify_connect_status(struct brcmf_if *ifp,
|
|
const struct brcmf_event_msg *e, void *data)
|
|
{
|
|
struct brcmf_cfg80211_info *cfg = ifp->drvr->config;
|
|
struct net_device *ndev = ifp->ndev;
|
|
struct brcmf_cfg80211_profile *profile = &ifp->vif->profile;
|
|
struct ieee80211_channel *chan;
|
|
s32 err = 0;
|
|
|
|
if ((e->event_code == BRCMF_E_DEAUTH) ||
|
|
(e->event_code == BRCMF_E_DEAUTH_IND) ||
|
|
(e->event_code == BRCMF_E_DISASSOC_IND) ||
|
|
((e->event_code == BRCMF_E_LINK) && (!e->flags))) {
|
|
brcmf_proto_delete_peer(ifp->drvr, ifp->ifidx, (u8 *)e->addr);
|
|
}
|
|
|
|
if (brcmf_is_apmode(ifp->vif)) {
|
|
err = brcmf_notify_connect_status_ap(cfg, ndev, e, data);
|
|
} else if (brcmf_is_linkup(ifp->vif, e)) {
|
|
brcmf_dbg(CONN, "Linkup\n");
|
|
if (brcmf_is_ibssmode(ifp->vif)) {
|
|
brcmf_inform_ibss(cfg, ndev, e->addr);
|
|
chan = ieee80211_get_channel(cfg->wiphy, cfg->channel);
|
|
memcpy(profile->bssid, e->addr, ETH_ALEN);
|
|
cfg80211_ibss_joined(ndev, e->addr, chan, GFP_KERNEL);
|
|
clear_bit(BRCMF_VIF_STATUS_CONNECTING,
|
|
&ifp->vif->sme_state);
|
|
set_bit(BRCMF_VIF_STATUS_CONNECTED,
|
|
&ifp->vif->sme_state);
|
|
} else
|
|
brcmf_bss_connect_done(cfg, ndev, e, true);
|
|
brcmf_net_setcarrier(ifp, true);
|
|
} else if (brcmf_is_linkdown(ifp->vif, e)) {
|
|
brcmf_dbg(CONN, "Linkdown\n");
|
|
if (!brcmf_is_ibssmode(ifp->vif) &&
|
|
test_bit(BRCMF_VIF_STATUS_CONNECTED,
|
|
&ifp->vif->sme_state)) {
|
|
if (memcmp(profile->bssid, e->addr, ETH_ALEN))
|
|
return err;
|
|
|
|
brcmf_bss_connect_done(cfg, ndev, e, false);
|
|
brcmf_link_down(ifp->vif,
|
|
brcmf_map_fw_linkdown_reason(e),
|
|
e->event_code &
|
|
(BRCMF_E_DEAUTH_IND |
|
|
BRCMF_E_DISASSOC_IND)
|
|
? false : true);
|
|
brcmf_init_prof(ndev_to_prof(ndev));
|
|
if (ndev != cfg_to_ndev(cfg))
|
|
complete(&cfg->vif_disabled);
|
|
brcmf_net_setcarrier(ifp, false);
|
|
}
|
|
} else if (brcmf_is_nonetwork(cfg, e)) {
|
|
if (brcmf_is_ibssmode(ifp->vif))
|
|
clear_bit(BRCMF_VIF_STATUS_CONNECTING,
|
|
&ifp->vif->sme_state);
|
|
else
|
|
brcmf_bss_connect_done(cfg, ndev, e, false);
|
|
}
|
|
|
|
return err;
|
|
}
|
|
|
|
static s32
|
|
brcmf_notify_roaming_status(struct brcmf_if *ifp,
|
|
const struct brcmf_event_msg *e, void *data)
|
|
{
|
|
struct brcmf_cfg80211_info *cfg = ifp->drvr->config;
|
|
u32 event = e->event_code;
|
|
u32 status = e->status;
|
|
|
|
if (event == BRCMF_E_ROAM && status == BRCMF_E_STATUS_SUCCESS) {
|
|
if (test_bit(BRCMF_VIF_STATUS_CONNECTED,
|
|
&ifp->vif->sme_state)) {
|
|
brcmf_bss_roaming_done(cfg, ifp->ndev, e);
|
|
} else {
|
|
brcmf_bss_connect_done(cfg, ifp->ndev, e, true);
|
|
brcmf_net_setcarrier(ifp, true);
|
|
}
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
static s32
|
|
brcmf_notify_mic_status(struct brcmf_if *ifp,
|
|
const struct brcmf_event_msg *e, void *data)
|
|
{
|
|
u16 flags = e->flags;
|
|
enum nl80211_key_type key_type;
|
|
|
|
if (flags & BRCMF_EVENT_MSG_GROUP)
|
|
key_type = NL80211_KEYTYPE_GROUP;
|
|
else
|
|
key_type = NL80211_KEYTYPE_PAIRWISE;
|
|
|
|
cfg80211_michael_mic_failure(ifp->ndev, (u8 *)&e->addr, key_type, -1,
|
|
NULL, GFP_KERNEL);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static s32 brcmf_notify_rssi(struct brcmf_if *ifp,
|
|
const struct brcmf_event_msg *e, void *data)
|
|
{
|
|
struct brcmf_cfg80211_vif *vif = ifp->vif;
|
|
struct brcmf_rssi_be *info = data;
|
|
s32 rssi, snr = 0, noise = 0;
|
|
s32 low, high, last;
|
|
|
|
if (e->datalen >= sizeof(*info)) {
|
|
rssi = be32_to_cpu(info->rssi);
|
|
snr = be32_to_cpu(info->snr);
|
|
noise = be32_to_cpu(info->noise);
|
|
} else if (e->datalen >= sizeof(rssi)) {
|
|
rssi = be32_to_cpu(*(__be32 *)data);
|
|
} else {
|
|
brcmf_err("insufficient RSSI event data\n");
|
|
return 0;
|
|
}
|
|
|
|
low = vif->cqm_rssi_low;
|
|
high = vif->cqm_rssi_high;
|
|
last = vif->cqm_rssi_last;
|
|
|
|
brcmf_dbg(TRACE, "rssi=%d snr=%d noise=%d low=%d high=%d last=%d\n",
|
|
rssi, snr, noise, low, high, last);
|
|
|
|
vif->cqm_rssi_last = rssi;
|
|
|
|
if (rssi <= low || rssi == 0) {
|
|
brcmf_dbg(INFO, "LOW rssi=%d\n", rssi);
|
|
cfg80211_cqm_rssi_notify(ifp->ndev,
|
|
NL80211_CQM_RSSI_THRESHOLD_EVENT_LOW,
|
|
rssi, GFP_KERNEL);
|
|
} else if (rssi > high) {
|
|
brcmf_dbg(INFO, "HIGH rssi=%d\n", rssi);
|
|
cfg80211_cqm_rssi_notify(ifp->ndev,
|
|
NL80211_CQM_RSSI_THRESHOLD_EVENT_HIGH,
|
|
rssi, GFP_KERNEL);
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
static s32 brcmf_notify_vif_event(struct brcmf_if *ifp,
|
|
const struct brcmf_event_msg *e, void *data)
|
|
{
|
|
struct brcmf_cfg80211_info *cfg = ifp->drvr->config;
|
|
struct brcmf_if_event *ifevent = (struct brcmf_if_event *)data;
|
|
struct brcmf_cfg80211_vif_event *event = &cfg->vif_event;
|
|
struct brcmf_cfg80211_vif *vif;
|
|
|
|
brcmf_dbg(TRACE, "Enter: action %u flags %u ifidx %u bsscfgidx %u\n",
|
|
ifevent->action, ifevent->flags, ifevent->ifidx,
|
|
ifevent->bsscfgidx);
|
|
|
|
spin_lock(&event->vif_event_lock);
|
|
event->action = ifevent->action;
|
|
vif = event->vif;
|
|
|
|
switch (ifevent->action) {
|
|
case BRCMF_E_IF_ADD:
|
|
/* waiting process may have timed out */
|
|
if (!cfg->vif_event.vif) {
|
|
spin_unlock(&event->vif_event_lock);
|
|
return -EBADF;
|
|
}
|
|
|
|
ifp->vif = vif;
|
|
vif->ifp = ifp;
|
|
if (ifp->ndev) {
|
|
vif->wdev.netdev = ifp->ndev;
|
|
ifp->ndev->ieee80211_ptr = &vif->wdev;
|
|
SET_NETDEV_DEV(ifp->ndev, wiphy_dev(cfg->wiphy));
|
|
}
|
|
spin_unlock(&event->vif_event_lock);
|
|
wake_up(&event->vif_wq);
|
|
return 0;
|
|
|
|
case BRCMF_E_IF_DEL:
|
|
spin_unlock(&event->vif_event_lock);
|
|
/* event may not be upon user request */
|
|
if (brcmf_cfg80211_vif_event_armed(cfg))
|
|
wake_up(&event->vif_wq);
|
|
return 0;
|
|
|
|
case BRCMF_E_IF_CHANGE:
|
|
spin_unlock(&event->vif_event_lock);
|
|
wake_up(&event->vif_wq);
|
|
return 0;
|
|
|
|
default:
|
|
spin_unlock(&event->vif_event_lock);
|
|
break;
|
|
}
|
|
return -EINVAL;
|
|
}
|
|
|
|
static void brcmf_init_conf(struct brcmf_cfg80211_conf *conf)
|
|
{
|
|
conf->frag_threshold = (u32)-1;
|
|
conf->rts_threshold = (u32)-1;
|
|
conf->retry_short = (u32)-1;
|
|
conf->retry_long = (u32)-1;
|
|
}
|
|
|
|
static void brcmf_register_event_handlers(struct brcmf_cfg80211_info *cfg)
|
|
{
|
|
brcmf_fweh_register(cfg->pub, BRCMF_E_LINK,
|
|
brcmf_notify_connect_status);
|
|
brcmf_fweh_register(cfg->pub, BRCMF_E_DEAUTH_IND,
|
|
brcmf_notify_connect_status);
|
|
brcmf_fweh_register(cfg->pub, BRCMF_E_DEAUTH,
|
|
brcmf_notify_connect_status);
|
|
brcmf_fweh_register(cfg->pub, BRCMF_E_DISASSOC_IND,
|
|
brcmf_notify_connect_status);
|
|
brcmf_fweh_register(cfg->pub, BRCMF_E_ASSOC_IND,
|
|
brcmf_notify_connect_status);
|
|
brcmf_fweh_register(cfg->pub, BRCMF_E_REASSOC_IND,
|
|
brcmf_notify_connect_status);
|
|
brcmf_fweh_register(cfg->pub, BRCMF_E_ROAM,
|
|
brcmf_notify_roaming_status);
|
|
brcmf_fweh_register(cfg->pub, BRCMF_E_MIC_ERROR,
|
|
brcmf_notify_mic_status);
|
|
brcmf_fweh_register(cfg->pub, BRCMF_E_SET_SSID,
|
|
brcmf_notify_connect_status);
|
|
brcmf_fweh_register(cfg->pub, BRCMF_E_PFN_NET_FOUND,
|
|
brcmf_notify_sched_scan_results);
|
|
brcmf_fweh_register(cfg->pub, BRCMF_E_IF,
|
|
brcmf_notify_vif_event);
|
|
brcmf_fweh_register(cfg->pub, BRCMF_E_P2P_PROBEREQ_MSG,
|
|
brcmf_p2p_notify_rx_mgmt_p2p_probereq);
|
|
brcmf_fweh_register(cfg->pub, BRCMF_E_P2P_DISC_LISTEN_COMPLETE,
|
|
brcmf_p2p_notify_listen_complete);
|
|
brcmf_fweh_register(cfg->pub, BRCMF_E_ACTION_FRAME_RX,
|
|
brcmf_p2p_notify_action_frame_rx);
|
|
brcmf_fweh_register(cfg->pub, BRCMF_E_ACTION_FRAME_COMPLETE,
|
|
brcmf_p2p_notify_action_tx_complete);
|
|
brcmf_fweh_register(cfg->pub, BRCMF_E_ACTION_FRAME_OFF_CHAN_COMPLETE,
|
|
brcmf_p2p_notify_action_tx_complete);
|
|
brcmf_fweh_register(cfg->pub, BRCMF_E_PSK_SUP,
|
|
brcmf_notify_connect_status);
|
|
brcmf_fweh_register(cfg->pub, BRCMF_E_RSSI, brcmf_notify_rssi);
|
|
}
|
|
|
|
static void brcmf_deinit_priv_mem(struct brcmf_cfg80211_info *cfg)
|
|
{
|
|
kfree(cfg->conf);
|
|
cfg->conf = NULL;
|
|
kfree(cfg->extra_buf);
|
|
cfg->extra_buf = NULL;
|
|
kfree(cfg->wowl.nd);
|
|
cfg->wowl.nd = NULL;
|
|
kfree(cfg->wowl.nd_info);
|
|
cfg->wowl.nd_info = NULL;
|
|
kfree(cfg->escan_info.escan_buf);
|
|
cfg->escan_info.escan_buf = NULL;
|
|
}
|
|
|
|
static s32 brcmf_init_priv_mem(struct brcmf_cfg80211_info *cfg)
|
|
{
|
|
cfg->conf = kzalloc(sizeof(*cfg->conf), GFP_KERNEL);
|
|
if (!cfg->conf)
|
|
goto init_priv_mem_out;
|
|
cfg->extra_buf = kzalloc(WL_EXTRA_BUF_MAX, GFP_KERNEL);
|
|
if (!cfg->extra_buf)
|
|
goto init_priv_mem_out;
|
|
cfg->wowl.nd = kzalloc(sizeof(*cfg->wowl.nd) + sizeof(u32), GFP_KERNEL);
|
|
if (!cfg->wowl.nd)
|
|
goto init_priv_mem_out;
|
|
cfg->wowl.nd_info = kzalloc(sizeof(*cfg->wowl.nd_info) +
|
|
sizeof(struct cfg80211_wowlan_nd_match *),
|
|
GFP_KERNEL);
|
|
if (!cfg->wowl.nd_info)
|
|
goto init_priv_mem_out;
|
|
cfg->escan_info.escan_buf = kzalloc(BRCMF_ESCAN_BUF_SIZE, GFP_KERNEL);
|
|
if (!cfg->escan_info.escan_buf)
|
|
goto init_priv_mem_out;
|
|
|
|
return 0;
|
|
|
|
init_priv_mem_out:
|
|
brcmf_deinit_priv_mem(cfg);
|
|
|
|
return -ENOMEM;
|
|
}
|
|
|
|
static s32 wl_init_priv(struct brcmf_cfg80211_info *cfg)
|
|
{
|
|
s32 err = 0;
|
|
|
|
cfg->scan_request = NULL;
|
|
cfg->pwr_save = true;
|
|
cfg->dongle_up = false; /* dongle is not up yet */
|
|
err = brcmf_init_priv_mem(cfg);
|
|
if (err)
|
|
return err;
|
|
brcmf_register_event_handlers(cfg);
|
|
mutex_init(&cfg->usr_sync);
|
|
brcmf_init_escan(cfg);
|
|
brcmf_init_conf(cfg->conf);
|
|
brcmf_init_wmm_prio(cfg->ac_priority);
|
|
init_completion(&cfg->vif_disabled);
|
|
return err;
|
|
}
|
|
|
|
static void wl_deinit_priv(struct brcmf_cfg80211_info *cfg)
|
|
{
|
|
cfg->dongle_up = false; /* dongle down */
|
|
brcmf_abort_scanning(cfg);
|
|
brcmf_deinit_priv_mem(cfg);
|
|
brcmf_clear_assoc_ies(cfg);
|
|
}
|
|
|
|
static void init_vif_event(struct brcmf_cfg80211_vif_event *event)
|
|
{
|
|
init_waitqueue_head(&event->vif_wq);
|
|
spin_lock_init(&event->vif_event_lock);
|
|
}
|
|
|
|
static s32 brcmf_dongle_roam(struct brcmf_if *ifp)
|
|
{
|
|
struct brcmf_pub *drvr = ifp->drvr;
|
|
s32 err;
|
|
u32 bcn_timeout;
|
|
__le32 roamtrigger[2];
|
|
__le32 roam_delta[2];
|
|
|
|
/* Configure beacon timeout value based upon roaming setting */
|
|
if (ifp->drvr->settings->roamoff)
|
|
bcn_timeout = BRCMF_DEFAULT_BCN_TIMEOUT_ROAM_OFF;
|
|
else
|
|
bcn_timeout = BRCMF_DEFAULT_BCN_TIMEOUT_ROAM_ON;
|
|
err = brcmf_fil_iovar_int_set(ifp, "bcn_timeout", bcn_timeout);
|
|
if (err) {
|
|
bphy_err(drvr, "bcn_timeout error (%d)\n", err);
|
|
goto roam_setup_done;
|
|
}
|
|
|
|
/* Enable/Disable built-in roaming to allow supplicant to take care of
|
|
* roaming.
|
|
*/
|
|
brcmf_dbg(INFO, "Internal Roaming = %s\n",
|
|
ifp->drvr->settings->roamoff ? "Off" : "On");
|
|
err = brcmf_fil_iovar_int_set(ifp, "roam_off",
|
|
ifp->drvr->settings->roamoff);
|
|
if (err) {
|
|
bphy_err(drvr, "roam_off error (%d)\n", err);
|
|
goto roam_setup_done;
|
|
}
|
|
|
|
roamtrigger[0] = cpu_to_le32(WL_ROAM_TRIGGER_LEVEL);
|
|
roamtrigger[1] = cpu_to_le32(BRCM_BAND_ALL);
|
|
err = brcmf_fil_cmd_data_set(ifp, BRCMF_C_SET_ROAM_TRIGGER,
|
|
(void *)roamtrigger, sizeof(roamtrigger));
|
|
if (err)
|
|
bphy_err(drvr, "WLC_SET_ROAM_TRIGGER error (%d)\n", err);
|
|
|
|
roam_delta[0] = cpu_to_le32(WL_ROAM_DELTA);
|
|
roam_delta[1] = cpu_to_le32(BRCM_BAND_ALL);
|
|
err = brcmf_fil_cmd_data_set(ifp, BRCMF_C_SET_ROAM_DELTA,
|
|
(void *)roam_delta, sizeof(roam_delta));
|
|
if (err)
|
|
bphy_err(drvr, "WLC_SET_ROAM_DELTA error (%d)\n", err);
|
|
|
|
return 0;
|
|
|
|
roam_setup_done:
|
|
return err;
|
|
}
|
|
|
|
static s32
|
|
brcmf_dongle_scantime(struct brcmf_if *ifp)
|
|
{
|
|
struct brcmf_pub *drvr = ifp->drvr;
|
|
s32 err = 0;
|
|
|
|
err = brcmf_fil_cmd_int_set(ifp, BRCMF_C_SET_SCAN_CHANNEL_TIME,
|
|
BRCMF_SCAN_CHANNEL_TIME);
|
|
if (err) {
|
|
bphy_err(drvr, "Scan assoc time error (%d)\n", err);
|
|
goto dongle_scantime_out;
|
|
}
|
|
err = brcmf_fil_cmd_int_set(ifp, BRCMF_C_SET_SCAN_UNASSOC_TIME,
|
|
BRCMF_SCAN_UNASSOC_TIME);
|
|
if (err) {
|
|
bphy_err(drvr, "Scan unassoc time error (%d)\n", err);
|
|
goto dongle_scantime_out;
|
|
}
|
|
|
|
err = brcmf_fil_cmd_int_set(ifp, BRCMF_C_SET_SCAN_PASSIVE_TIME,
|
|
BRCMF_SCAN_PASSIVE_TIME);
|
|
if (err) {
|
|
bphy_err(drvr, "Scan passive time error (%d)\n", err);
|
|
goto dongle_scantime_out;
|
|
}
|
|
|
|
dongle_scantime_out:
|
|
return err;
|
|
}
|
|
|
|
static void brcmf_update_bw40_channel_flag(struct ieee80211_channel *channel,
|
|
struct brcmu_chan *ch)
|
|
{
|
|
u32 ht40_flag;
|
|
|
|
ht40_flag = channel->flags & IEEE80211_CHAN_NO_HT40;
|
|
if (ch->sb == BRCMU_CHAN_SB_U) {
|
|
if (ht40_flag == IEEE80211_CHAN_NO_HT40)
|
|
channel->flags &= ~IEEE80211_CHAN_NO_HT40;
|
|
channel->flags |= IEEE80211_CHAN_NO_HT40PLUS;
|
|
} else {
|
|
/* It should be one of
|
|
* IEEE80211_CHAN_NO_HT40 or
|
|
* IEEE80211_CHAN_NO_HT40PLUS
|
|
*/
|
|
channel->flags &= ~IEEE80211_CHAN_NO_HT40;
|
|
if (ht40_flag == IEEE80211_CHAN_NO_HT40)
|
|
channel->flags |= IEEE80211_CHAN_NO_HT40MINUS;
|
|
}
|
|
}
|
|
|
|
static int brcmf_construct_chaninfo(struct brcmf_cfg80211_info *cfg,
|
|
u32 bw_cap[])
|
|
{
|
|
struct wiphy *wiphy = cfg_to_wiphy(cfg);
|
|
struct brcmf_pub *drvr = cfg->pub;
|
|
struct brcmf_if *ifp = brcmf_get_ifp(drvr, 0);
|
|
struct ieee80211_supported_band *band;
|
|
struct ieee80211_channel *channel;
|
|
struct brcmf_chanspec_list *list;
|
|
struct brcmu_chan ch;
|
|
int err;
|
|
u8 *pbuf;
|
|
u32 i, j;
|
|
u32 total;
|
|
u32 chaninfo;
|
|
|
|
pbuf = kzalloc(BRCMF_DCMD_MEDLEN, GFP_KERNEL);
|
|
|
|
if (pbuf == NULL)
|
|
return -ENOMEM;
|
|
|
|
list = (struct brcmf_chanspec_list *)pbuf;
|
|
|
|
err = brcmf_fil_iovar_data_get(ifp, "chanspecs", pbuf,
|
|
BRCMF_DCMD_MEDLEN);
|
|
if (err) {
|
|
bphy_err(drvr, "get chanspecs error (%d)\n", err);
|
|
goto fail_pbuf;
|
|
}
|
|
|
|
band = wiphy->bands[NL80211_BAND_2GHZ];
|
|
if (band)
|
|
for (i = 0; i < band->n_channels; i++)
|
|
band->channels[i].flags = IEEE80211_CHAN_DISABLED;
|
|
band = wiphy->bands[NL80211_BAND_5GHZ];
|
|
if (band)
|
|
for (i = 0; i < band->n_channels; i++)
|
|
band->channels[i].flags = IEEE80211_CHAN_DISABLED;
|
|
|
|
total = le32_to_cpu(list->count);
|
|
if (total > BRCMF_MAX_CHANSPEC_LIST) {
|
|
bphy_err(drvr, "Invalid count of channel Spec. (%u)\n",
|
|
total);
|
|
err = -EINVAL;
|
|
goto fail_pbuf;
|
|
}
|
|
|
|
for (i = 0; i < total; i++) {
|
|
ch.chspec = (u16)le32_to_cpu(list->element[i]);
|
|
cfg->d11inf.decchspec(&ch);
|
|
|
|
if (ch.band == BRCMU_CHAN_BAND_2G) {
|
|
band = wiphy->bands[NL80211_BAND_2GHZ];
|
|
} else if (ch.band == BRCMU_CHAN_BAND_5G) {
|
|
band = wiphy->bands[NL80211_BAND_5GHZ];
|
|
} else {
|
|
bphy_err(drvr, "Invalid channel Spec. 0x%x.\n",
|
|
ch.chspec);
|
|
continue;
|
|
}
|
|
if (!band)
|
|
continue;
|
|
if (!(bw_cap[band->band] & WLC_BW_40MHZ_BIT) &&
|
|
ch.bw == BRCMU_CHAN_BW_40)
|
|
continue;
|
|
if (!(bw_cap[band->band] & WLC_BW_80MHZ_BIT) &&
|
|
ch.bw == BRCMU_CHAN_BW_80)
|
|
continue;
|
|
|
|
channel = NULL;
|
|
for (j = 0; j < band->n_channels; j++) {
|
|
if (band->channels[j].hw_value == ch.control_ch_num) {
|
|
channel = &band->channels[j];
|
|
break;
|
|
}
|
|
}
|
|
if (!channel) {
|
|
/* It seems firmware supports some channel we never
|
|
* considered. Something new in IEEE standard?
|
|
*/
|
|
bphy_err(drvr, "Ignoring unexpected firmware channel %d\n",
|
|
ch.control_ch_num);
|
|
continue;
|
|
}
|
|
|
|
if (channel->orig_flags & IEEE80211_CHAN_DISABLED)
|
|
continue;
|
|
|
|
/* assuming the chanspecs order is HT20,
|
|
* HT40 upper, HT40 lower, and VHT80.
|
|
*/
|
|
switch (ch.bw) {
|
|
case BRCMU_CHAN_BW_160:
|
|
channel->flags &= ~IEEE80211_CHAN_NO_160MHZ;
|
|
break;
|
|
case BRCMU_CHAN_BW_80:
|
|
channel->flags &= ~IEEE80211_CHAN_NO_80MHZ;
|
|
break;
|
|
case BRCMU_CHAN_BW_40:
|
|
brcmf_update_bw40_channel_flag(channel, &ch);
|
|
break;
|
|
default:
|
|
wiphy_warn(wiphy, "Firmware reported unsupported bandwidth %d\n",
|
|
ch.bw);
|
|
fallthrough;
|
|
case BRCMU_CHAN_BW_20:
|
|
/* enable the channel and disable other bandwidths
|
|
* for now as mentioned order assure they are enabled
|
|
* for subsequent chanspecs.
|
|
*/
|
|
channel->flags = IEEE80211_CHAN_NO_HT40 |
|
|
IEEE80211_CHAN_NO_80MHZ |
|
|
IEEE80211_CHAN_NO_160MHZ;
|
|
ch.bw = BRCMU_CHAN_BW_20;
|
|
cfg->d11inf.encchspec(&ch);
|
|
chaninfo = ch.chspec;
|
|
err = brcmf_fil_bsscfg_int_get(ifp, "per_chan_info",
|
|
&chaninfo);
|
|
if (!err) {
|
|
if (chaninfo & WL_CHAN_RADAR)
|
|
channel->flags |=
|
|
(IEEE80211_CHAN_RADAR |
|
|
IEEE80211_CHAN_NO_IR);
|
|
if (chaninfo & WL_CHAN_PASSIVE)
|
|
channel->flags |=
|
|
IEEE80211_CHAN_NO_IR;
|
|
}
|
|
}
|
|
}
|
|
|
|
fail_pbuf:
|
|
kfree(pbuf);
|
|
return err;
|
|
}
|
|
|
|
static int brcmf_enable_bw40_2g(struct brcmf_cfg80211_info *cfg)
|
|
{
|
|
struct brcmf_pub *drvr = cfg->pub;
|
|
struct brcmf_if *ifp = brcmf_get_ifp(drvr, 0);
|
|
struct ieee80211_supported_band *band;
|
|
struct brcmf_fil_bwcap_le band_bwcap;
|
|
struct brcmf_chanspec_list *list;
|
|
u8 *pbuf;
|
|
u32 val;
|
|
int err;
|
|
struct brcmu_chan ch;
|
|
u32 num_chan;
|
|
int i, j;
|
|
|
|
/* verify support for bw_cap command */
|
|
val = WLC_BAND_5G;
|
|
err = brcmf_fil_iovar_int_get(ifp, "bw_cap", &val);
|
|
|
|
if (!err) {
|
|
/* only set 2G bandwidth using bw_cap command */
|
|
band_bwcap.band = cpu_to_le32(WLC_BAND_2G);
|
|
band_bwcap.bw_cap = cpu_to_le32(WLC_BW_CAP_40MHZ);
|
|
err = brcmf_fil_iovar_data_set(ifp, "bw_cap", &band_bwcap,
|
|
sizeof(band_bwcap));
|
|
} else {
|
|
brcmf_dbg(INFO, "fallback to mimo_bw_cap\n");
|
|
val = WLC_N_BW_40ALL;
|
|
err = brcmf_fil_iovar_int_set(ifp, "mimo_bw_cap", val);
|
|
}
|
|
|
|
if (!err) {
|
|
/* update channel info in 2G band */
|
|
pbuf = kzalloc(BRCMF_DCMD_MEDLEN, GFP_KERNEL);
|
|
|
|
if (pbuf == NULL)
|
|
return -ENOMEM;
|
|
|
|
ch.band = BRCMU_CHAN_BAND_2G;
|
|
ch.bw = BRCMU_CHAN_BW_40;
|
|
ch.sb = BRCMU_CHAN_SB_NONE;
|
|
ch.chnum = 0;
|
|
cfg->d11inf.encchspec(&ch);
|
|
|
|
/* pass encoded chanspec in query */
|
|
*(__le16 *)pbuf = cpu_to_le16(ch.chspec);
|
|
|
|
err = brcmf_fil_iovar_data_get(ifp, "chanspecs", pbuf,
|
|
BRCMF_DCMD_MEDLEN);
|
|
if (err) {
|
|
bphy_err(drvr, "get chanspecs error (%d)\n", err);
|
|
kfree(pbuf);
|
|
return err;
|
|
}
|
|
|
|
band = cfg_to_wiphy(cfg)->bands[NL80211_BAND_2GHZ];
|
|
list = (struct brcmf_chanspec_list *)pbuf;
|
|
num_chan = le32_to_cpu(list->count);
|
|
if (num_chan > BRCMF_MAX_CHANSPEC_LIST) {
|
|
bphy_err(drvr, "Invalid count of channel Spec. (%u)\n",
|
|
num_chan);
|
|
kfree(pbuf);
|
|
return -EINVAL;
|
|
}
|
|
|
|
for (i = 0; i < num_chan; i++) {
|
|
ch.chspec = (u16)le32_to_cpu(list->element[i]);
|
|
cfg->d11inf.decchspec(&ch);
|
|
if (WARN_ON(ch.band != BRCMU_CHAN_BAND_2G))
|
|
continue;
|
|
if (WARN_ON(ch.bw != BRCMU_CHAN_BW_40))
|
|
continue;
|
|
for (j = 0; j < band->n_channels; j++) {
|
|
if (band->channels[j].hw_value == ch.control_ch_num)
|
|
break;
|
|
}
|
|
if (WARN_ON(j == band->n_channels))
|
|
continue;
|
|
|
|
brcmf_update_bw40_channel_flag(&band->channels[j], &ch);
|
|
}
|
|
kfree(pbuf);
|
|
}
|
|
return err;
|
|
}
|
|
|
|
static void brcmf_get_bwcap(struct brcmf_if *ifp, u32 bw_cap[])
|
|
{
|
|
struct brcmf_pub *drvr = ifp->drvr;
|
|
u32 band, mimo_bwcap;
|
|
int err;
|
|
|
|
band = WLC_BAND_2G;
|
|
err = brcmf_fil_iovar_int_get(ifp, "bw_cap", &band);
|
|
if (!err) {
|
|
bw_cap[NL80211_BAND_2GHZ] = band;
|
|
band = WLC_BAND_5G;
|
|
err = brcmf_fil_iovar_int_get(ifp, "bw_cap", &band);
|
|
if (!err) {
|
|
bw_cap[NL80211_BAND_5GHZ] = band;
|
|
return;
|
|
}
|
|
WARN_ON(1);
|
|
return;
|
|
}
|
|
brcmf_dbg(INFO, "fallback to mimo_bw_cap info\n");
|
|
mimo_bwcap = 0;
|
|
err = brcmf_fil_iovar_int_get(ifp, "mimo_bw_cap", &mimo_bwcap);
|
|
if (err)
|
|
/* assume 20MHz if firmware does not give a clue */
|
|
mimo_bwcap = WLC_N_BW_20ALL;
|
|
|
|
switch (mimo_bwcap) {
|
|
case WLC_N_BW_40ALL:
|
|
bw_cap[NL80211_BAND_2GHZ] |= WLC_BW_40MHZ_BIT;
|
|
fallthrough;
|
|
case WLC_N_BW_20IN2G_40IN5G:
|
|
bw_cap[NL80211_BAND_5GHZ] |= WLC_BW_40MHZ_BIT;
|
|
fallthrough;
|
|
case WLC_N_BW_20ALL:
|
|
bw_cap[NL80211_BAND_2GHZ] |= WLC_BW_20MHZ_BIT;
|
|
bw_cap[NL80211_BAND_5GHZ] |= WLC_BW_20MHZ_BIT;
|
|
break;
|
|
default:
|
|
bphy_err(drvr, "invalid mimo_bw_cap value\n");
|
|
}
|
|
}
|
|
|
|
static void brcmf_update_ht_cap(struct ieee80211_supported_band *band,
|
|
u32 bw_cap[2], u32 nchain)
|
|
{
|
|
band->ht_cap.ht_supported = true;
|
|
if (bw_cap[band->band] & WLC_BW_40MHZ_BIT) {
|
|
band->ht_cap.cap |= IEEE80211_HT_CAP_SGI_40;
|
|
band->ht_cap.cap |= IEEE80211_HT_CAP_SUP_WIDTH_20_40;
|
|
}
|
|
band->ht_cap.cap |= IEEE80211_HT_CAP_SGI_20;
|
|
band->ht_cap.cap |= IEEE80211_HT_CAP_DSSSCCK40;
|
|
band->ht_cap.ampdu_factor = IEEE80211_HT_MAX_AMPDU_64K;
|
|
band->ht_cap.ampdu_density = IEEE80211_HT_MPDU_DENSITY_16;
|
|
memset(band->ht_cap.mcs.rx_mask, 0xff, nchain);
|
|
band->ht_cap.mcs.tx_params = IEEE80211_HT_MCS_TX_DEFINED;
|
|
}
|
|
|
|
static __le16 brcmf_get_mcs_map(u32 nchain, enum ieee80211_vht_mcs_support supp)
|
|
{
|
|
u16 mcs_map;
|
|
int i;
|
|
|
|
for (i = 0, mcs_map = 0xFFFF; i < nchain; i++)
|
|
mcs_map = (mcs_map << 2) | supp;
|
|
|
|
return cpu_to_le16(mcs_map);
|
|
}
|
|
|
|
static void brcmf_update_vht_cap(struct ieee80211_supported_band *band,
|
|
u32 bw_cap[2], u32 nchain, u32 txstreams,
|
|
u32 txbf_bfe_cap, u32 txbf_bfr_cap)
|
|
{
|
|
__le16 mcs_map;
|
|
|
|
/* not allowed in 2.4G band */
|
|
if (band->band == NL80211_BAND_2GHZ)
|
|
return;
|
|
|
|
band->vht_cap.vht_supported = true;
|
|
/* 80MHz is mandatory */
|
|
band->vht_cap.cap |= IEEE80211_VHT_CAP_SHORT_GI_80;
|
|
if (bw_cap[band->band] & WLC_BW_160MHZ_BIT) {
|
|
band->vht_cap.cap |= IEEE80211_VHT_CAP_SUPP_CHAN_WIDTH_160MHZ;
|
|
band->vht_cap.cap |= IEEE80211_VHT_CAP_SHORT_GI_160;
|
|
}
|
|
/* all support 256-QAM */
|
|
mcs_map = brcmf_get_mcs_map(nchain, IEEE80211_VHT_MCS_SUPPORT_0_9);
|
|
band->vht_cap.vht_mcs.rx_mcs_map = mcs_map;
|
|
band->vht_cap.vht_mcs.tx_mcs_map = mcs_map;
|
|
|
|
/* Beamforming support information */
|
|
if (txbf_bfe_cap & BRCMF_TXBF_SU_BFE_CAP)
|
|
band->vht_cap.cap |= IEEE80211_VHT_CAP_SU_BEAMFORMEE_CAPABLE;
|
|
if (txbf_bfe_cap & BRCMF_TXBF_MU_BFE_CAP)
|
|
band->vht_cap.cap |= IEEE80211_VHT_CAP_MU_BEAMFORMEE_CAPABLE;
|
|
if (txbf_bfr_cap & BRCMF_TXBF_SU_BFR_CAP)
|
|
band->vht_cap.cap |= IEEE80211_VHT_CAP_SU_BEAMFORMER_CAPABLE;
|
|
if (txbf_bfr_cap & BRCMF_TXBF_MU_BFR_CAP)
|
|
band->vht_cap.cap |= IEEE80211_VHT_CAP_MU_BEAMFORMER_CAPABLE;
|
|
|
|
if ((txbf_bfe_cap || txbf_bfr_cap) && (txstreams > 1)) {
|
|
band->vht_cap.cap |=
|
|
(2 << IEEE80211_VHT_CAP_BEAMFORMEE_STS_SHIFT);
|
|
band->vht_cap.cap |= ((txstreams - 1) <<
|
|
IEEE80211_VHT_CAP_SOUNDING_DIMENSIONS_SHIFT);
|
|
band->vht_cap.cap |=
|
|
IEEE80211_VHT_CAP_VHT_LINK_ADAPTATION_VHT_MRQ_MFB;
|
|
}
|
|
}
|
|
|
|
static int brcmf_setup_wiphybands(struct brcmf_cfg80211_info *cfg)
|
|
{
|
|
struct brcmf_pub *drvr = cfg->pub;
|
|
struct brcmf_if *ifp = brcmf_get_ifp(drvr, 0);
|
|
struct wiphy *wiphy = cfg_to_wiphy(cfg);
|
|
u32 nmode = 0;
|
|
u32 vhtmode = 0;
|
|
u32 bw_cap[2] = { WLC_BW_20MHZ_BIT, WLC_BW_20MHZ_BIT };
|
|
u32 rxchain;
|
|
u32 nchain;
|
|
int err;
|
|
s32 i;
|
|
struct ieee80211_supported_band *band;
|
|
u32 txstreams = 0;
|
|
u32 txbf_bfe_cap = 0;
|
|
u32 txbf_bfr_cap = 0;
|
|
|
|
(void)brcmf_fil_iovar_int_get(ifp, "vhtmode", &vhtmode);
|
|
err = brcmf_fil_iovar_int_get(ifp, "nmode", &nmode);
|
|
if (err) {
|
|
bphy_err(drvr, "nmode error (%d)\n", err);
|
|
} else {
|
|
brcmf_get_bwcap(ifp, bw_cap);
|
|
}
|
|
brcmf_dbg(INFO, "nmode=%d, vhtmode=%d, bw_cap=(%d, %d)\n",
|
|
nmode, vhtmode, bw_cap[NL80211_BAND_2GHZ],
|
|
bw_cap[NL80211_BAND_5GHZ]);
|
|
|
|
err = brcmf_fil_iovar_int_get(ifp, "rxchain", &rxchain);
|
|
if (err) {
|
|
/* rxchain unsupported by firmware of older chips */
|
|
if (err == -EBADE)
|
|
bphy_info_once(drvr, "rxchain unsupported\n");
|
|
else
|
|
bphy_err(drvr, "rxchain error (%d)\n", err);
|
|
|
|
nchain = 1;
|
|
} else {
|
|
for (nchain = 0; rxchain; nchain++)
|
|
rxchain = rxchain & (rxchain - 1);
|
|
}
|
|
brcmf_dbg(INFO, "nchain=%d\n", nchain);
|
|
|
|
err = brcmf_construct_chaninfo(cfg, bw_cap);
|
|
if (err) {
|
|
bphy_err(drvr, "brcmf_construct_chaninfo failed (%d)\n", err);
|
|
return err;
|
|
}
|
|
|
|
if (vhtmode) {
|
|
(void)brcmf_fil_iovar_int_get(ifp, "txstreams", &txstreams);
|
|
(void)brcmf_fil_iovar_int_get(ifp, "txbf_bfe_cap",
|
|
&txbf_bfe_cap);
|
|
(void)brcmf_fil_iovar_int_get(ifp, "txbf_bfr_cap",
|
|
&txbf_bfr_cap);
|
|
}
|
|
|
|
for (i = 0; i < ARRAY_SIZE(wiphy->bands); i++) {
|
|
band = wiphy->bands[i];
|
|
if (band == NULL)
|
|
continue;
|
|
|
|
if (nmode)
|
|
brcmf_update_ht_cap(band, bw_cap, nchain);
|
|
if (vhtmode)
|
|
brcmf_update_vht_cap(band, bw_cap, nchain, txstreams,
|
|
txbf_bfe_cap, txbf_bfr_cap);
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
static const struct ieee80211_txrx_stypes
|
|
brcmf_txrx_stypes[NUM_NL80211_IFTYPES] = {
|
|
[NL80211_IFTYPE_STATION] = {
|
|
.tx = 0xffff,
|
|
.rx = BIT(IEEE80211_STYPE_ACTION >> 4) |
|
|
BIT(IEEE80211_STYPE_PROBE_REQ >> 4)
|
|
},
|
|
[NL80211_IFTYPE_P2P_CLIENT] = {
|
|
.tx = 0xffff,
|
|
.rx = BIT(IEEE80211_STYPE_ACTION >> 4) |
|
|
BIT(IEEE80211_STYPE_PROBE_REQ >> 4)
|
|
},
|
|
[NL80211_IFTYPE_P2P_GO] = {
|
|
.tx = 0xffff,
|
|
.rx = BIT(IEEE80211_STYPE_ASSOC_REQ >> 4) |
|
|
BIT(IEEE80211_STYPE_REASSOC_REQ >> 4) |
|
|
BIT(IEEE80211_STYPE_PROBE_REQ >> 4) |
|
|
BIT(IEEE80211_STYPE_DISASSOC >> 4) |
|
|
BIT(IEEE80211_STYPE_AUTH >> 4) |
|
|
BIT(IEEE80211_STYPE_DEAUTH >> 4) |
|
|
BIT(IEEE80211_STYPE_ACTION >> 4)
|
|
},
|
|
[NL80211_IFTYPE_P2P_DEVICE] = {
|
|
.tx = 0xffff,
|
|
.rx = BIT(IEEE80211_STYPE_ACTION >> 4) |
|
|
BIT(IEEE80211_STYPE_PROBE_REQ >> 4)
|
|
},
|
|
[NL80211_IFTYPE_AP] = {
|
|
.tx = 0xffff,
|
|
.rx = BIT(IEEE80211_STYPE_ASSOC_REQ >> 4) |
|
|
BIT(IEEE80211_STYPE_REASSOC_REQ >> 4) |
|
|
BIT(IEEE80211_STYPE_PROBE_REQ >> 4) |
|
|
BIT(IEEE80211_STYPE_DISASSOC >> 4) |
|
|
BIT(IEEE80211_STYPE_AUTH >> 4) |
|
|
BIT(IEEE80211_STYPE_DEAUTH >> 4) |
|
|
BIT(IEEE80211_STYPE_ACTION >> 4)
|
|
}
|
|
};
|
|
|
|
/**
|
|
* brcmf_setup_ifmodes() - determine interface modes and combinations.
|
|
*
|
|
* @wiphy: wiphy object.
|
|
* @ifp: interface object needed for feat module api.
|
|
*
|
|
* The interface modes and combinations are determined dynamically here
|
|
* based on firmware functionality.
|
|
*
|
|
* no p2p and no mbss:
|
|
*
|
|
* #STA <= 1, #AP <= 1, channels = 1, 2 total
|
|
*
|
|
* no p2p and mbss:
|
|
*
|
|
* #STA <= 1, #AP <= 1, channels = 1, 2 total
|
|
* #AP <= 4, matching BI, channels = 1, 4 total
|
|
*
|
|
* no p2p and rsdb:
|
|
* #STA <= 1, #AP <= 2, channels = 2, 4 total
|
|
*
|
|
* p2p, no mchan, and mbss:
|
|
*
|
|
* #STA <= 1, #P2P-DEV <= 1, #{P2P-CL, P2P-GO} <= 1, channels = 1, 3 total
|
|
* #STA <= 1, #P2P-DEV <= 1, #AP <= 1, #P2P-CL <= 1, channels = 1, 4 total
|
|
* #AP <= 4, matching BI, channels = 1, 4 total
|
|
*
|
|
* p2p, mchan, and mbss:
|
|
*
|
|
* #STA <= 1, #P2P-DEV <= 1, #{P2P-CL, P2P-GO} <= 1, channels = 2, 3 total
|
|
* #STA <= 1, #P2P-DEV <= 1, #AP <= 1, #P2P-CL <= 1, channels = 1, 4 total
|
|
* #AP <= 4, matching BI, channels = 1, 4 total
|
|
*
|
|
* p2p, rsdb, and no mbss:
|
|
* #STA <= 1, #P2P-DEV <= 1, #{P2P-CL, P2P-GO} <= 2, AP <= 2,
|
|
* channels = 2, 4 total
|
|
*/
|
|
static int brcmf_setup_ifmodes(struct wiphy *wiphy, struct brcmf_if *ifp)
|
|
{
|
|
struct ieee80211_iface_combination *combo = NULL;
|
|
struct ieee80211_iface_limit *c0_limits = NULL;
|
|
struct ieee80211_iface_limit *p2p_limits = NULL;
|
|
struct ieee80211_iface_limit *mbss_limits = NULL;
|
|
bool mon_flag, mbss, p2p, rsdb, mchan;
|
|
int i, c, n_combos, n_limits;
|
|
|
|
mon_flag = brcmf_feat_is_enabled(ifp, BRCMF_FEAT_MONITOR_FLAG);
|
|
mbss = brcmf_feat_is_enabled(ifp, BRCMF_FEAT_MBSS);
|
|
p2p = brcmf_feat_is_enabled(ifp, BRCMF_FEAT_P2P);
|
|
rsdb = brcmf_feat_is_enabled(ifp, BRCMF_FEAT_RSDB);
|
|
mchan = brcmf_feat_is_enabled(ifp, BRCMF_FEAT_MCHAN);
|
|
|
|
n_combos = 1 + !!(p2p && !rsdb) + !!mbss;
|
|
combo = kcalloc(n_combos, sizeof(*combo), GFP_KERNEL);
|
|
if (!combo)
|
|
goto err;
|
|
|
|
wiphy->interface_modes = BIT(NL80211_IFTYPE_STATION) |
|
|
BIT(NL80211_IFTYPE_ADHOC) |
|
|
BIT(NL80211_IFTYPE_AP);
|
|
if (mon_flag)
|
|
wiphy->interface_modes |= BIT(NL80211_IFTYPE_MONITOR);
|
|
if (p2p)
|
|
wiphy->interface_modes |= BIT(NL80211_IFTYPE_P2P_CLIENT) |
|
|
BIT(NL80211_IFTYPE_P2P_GO) |
|
|
BIT(NL80211_IFTYPE_P2P_DEVICE);
|
|
|
|
c = 0;
|
|
i = 0;
|
|
n_limits = 1 + mon_flag + (p2p ? 2 : 0) + (rsdb || !p2p);
|
|
c0_limits = kcalloc(n_limits, sizeof(*c0_limits), GFP_KERNEL);
|
|
if (!c0_limits)
|
|
goto err;
|
|
|
|
combo[c].num_different_channels = 1 + (rsdb || (p2p && mchan));
|
|
c0_limits[i].max = 1;
|
|
c0_limits[i++].types = BIT(NL80211_IFTYPE_STATION);
|
|
if (mon_flag) {
|
|
c0_limits[i].max = 1;
|
|
c0_limits[i++].types = BIT(NL80211_IFTYPE_MONITOR);
|
|
}
|
|
if (p2p) {
|
|
c0_limits[i].max = 1;
|
|
c0_limits[i++].types = BIT(NL80211_IFTYPE_P2P_DEVICE);
|
|
c0_limits[i].max = 1 + rsdb;
|
|
c0_limits[i++].types = BIT(NL80211_IFTYPE_P2P_CLIENT) |
|
|
BIT(NL80211_IFTYPE_P2P_GO);
|
|
}
|
|
if (p2p && rsdb) {
|
|
c0_limits[i].max = 2;
|
|
c0_limits[i++].types = BIT(NL80211_IFTYPE_AP);
|
|
combo[c].max_interfaces = 4;
|
|
} else if (p2p) {
|
|
combo[c].max_interfaces = i;
|
|
} else if (rsdb) {
|
|
c0_limits[i].max = 2;
|
|
c0_limits[i++].types = BIT(NL80211_IFTYPE_AP);
|
|
combo[c].max_interfaces = 3;
|
|
} else {
|
|
c0_limits[i].max = 1;
|
|
c0_limits[i++].types = BIT(NL80211_IFTYPE_AP);
|
|
combo[c].max_interfaces = i;
|
|
}
|
|
combo[c].n_limits = i;
|
|
combo[c].limits = c0_limits;
|
|
|
|
if (p2p && !rsdb) {
|
|
c++;
|
|
i = 0;
|
|
p2p_limits = kcalloc(4, sizeof(*p2p_limits), GFP_KERNEL);
|
|
if (!p2p_limits)
|
|
goto err;
|
|
p2p_limits[i].max = 1;
|
|
p2p_limits[i++].types = BIT(NL80211_IFTYPE_STATION);
|
|
p2p_limits[i].max = 1;
|
|
p2p_limits[i++].types = BIT(NL80211_IFTYPE_AP);
|
|
p2p_limits[i].max = 1;
|
|
p2p_limits[i++].types = BIT(NL80211_IFTYPE_P2P_CLIENT);
|
|
p2p_limits[i].max = 1;
|
|
p2p_limits[i++].types = BIT(NL80211_IFTYPE_P2P_DEVICE);
|
|
combo[c].num_different_channels = 1;
|
|
combo[c].max_interfaces = i;
|
|
combo[c].n_limits = i;
|
|
combo[c].limits = p2p_limits;
|
|
}
|
|
|
|
if (mbss) {
|
|
c++;
|
|
i = 0;
|
|
n_limits = 1 + mon_flag;
|
|
mbss_limits = kcalloc(n_limits, sizeof(*mbss_limits),
|
|
GFP_KERNEL);
|
|
if (!mbss_limits)
|
|
goto err;
|
|
mbss_limits[i].max = 4;
|
|
mbss_limits[i++].types = BIT(NL80211_IFTYPE_AP);
|
|
if (mon_flag) {
|
|
mbss_limits[i].max = 1;
|
|
mbss_limits[i++].types = BIT(NL80211_IFTYPE_MONITOR);
|
|
}
|
|
combo[c].beacon_int_infra_match = true;
|
|
combo[c].num_different_channels = 1;
|
|
combo[c].max_interfaces = 4 + mon_flag;
|
|
combo[c].n_limits = i;
|
|
combo[c].limits = mbss_limits;
|
|
}
|
|
|
|
wiphy->n_iface_combinations = n_combos;
|
|
wiphy->iface_combinations = combo;
|
|
return 0;
|
|
|
|
err:
|
|
kfree(c0_limits);
|
|
kfree(p2p_limits);
|
|
kfree(mbss_limits);
|
|
kfree(combo);
|
|
return -ENOMEM;
|
|
}
|
|
|
|
#ifdef CONFIG_PM
|
|
static const struct wiphy_wowlan_support brcmf_wowlan_support = {
|
|
.flags = WIPHY_WOWLAN_MAGIC_PKT | WIPHY_WOWLAN_DISCONNECT,
|
|
.n_patterns = BRCMF_WOWL_MAXPATTERNS,
|
|
.pattern_max_len = BRCMF_WOWL_MAXPATTERNSIZE,
|
|
.pattern_min_len = 1,
|
|
.max_pkt_offset = 1500,
|
|
};
|
|
#endif
|
|
|
|
static void brcmf_wiphy_wowl_params(struct wiphy *wiphy, struct brcmf_if *ifp)
|
|
{
|
|
#ifdef CONFIG_PM
|
|
struct brcmf_cfg80211_info *cfg = wiphy_to_cfg(wiphy);
|
|
struct brcmf_pub *drvr = cfg->pub;
|
|
struct wiphy_wowlan_support *wowl;
|
|
|
|
wowl = kmemdup(&brcmf_wowlan_support, sizeof(brcmf_wowlan_support),
|
|
GFP_KERNEL);
|
|
if (!wowl) {
|
|
bphy_err(drvr, "only support basic wowlan features\n");
|
|
wiphy->wowlan = &brcmf_wowlan_support;
|
|
return;
|
|
}
|
|
|
|
if (brcmf_feat_is_enabled(ifp, BRCMF_FEAT_PNO)) {
|
|
if (brcmf_feat_is_enabled(ifp, BRCMF_FEAT_WOWL_ND)) {
|
|
wowl->flags |= WIPHY_WOWLAN_NET_DETECT;
|
|
wowl->max_nd_match_sets = BRCMF_PNO_MAX_PFN_COUNT;
|
|
init_waitqueue_head(&cfg->wowl.nd_data_wait);
|
|
}
|
|
}
|
|
if (brcmf_feat_is_enabled(ifp, BRCMF_FEAT_WOWL_GTK)) {
|
|
wowl->flags |= WIPHY_WOWLAN_SUPPORTS_GTK_REKEY;
|
|
wowl->flags |= WIPHY_WOWLAN_GTK_REKEY_FAILURE;
|
|
}
|
|
|
|
wiphy->wowlan = wowl;
|
|
#endif
|
|
}
|
|
|
|
static int brcmf_setup_wiphy(struct wiphy *wiphy, struct brcmf_if *ifp)
|
|
{
|
|
struct brcmf_pub *drvr = ifp->drvr;
|
|
const struct ieee80211_iface_combination *combo;
|
|
struct ieee80211_supported_band *band;
|
|
u16 max_interfaces = 0;
|
|
bool gscan;
|
|
__le32 bandlist[3];
|
|
u32 n_bands;
|
|
int err, i;
|
|
|
|
wiphy->max_scan_ssids = WL_NUM_SCAN_MAX;
|
|
wiphy->max_scan_ie_len = BRCMF_SCAN_IE_LEN_MAX;
|
|
wiphy->max_num_pmkids = BRCMF_MAXPMKID;
|
|
|
|
err = brcmf_setup_ifmodes(wiphy, ifp);
|
|
if (err)
|
|
return err;
|
|
|
|
for (i = 0, combo = wiphy->iface_combinations;
|
|
i < wiphy->n_iface_combinations; i++, combo++) {
|
|
max_interfaces = max(max_interfaces, combo->max_interfaces);
|
|
}
|
|
|
|
for (i = 0; i < max_interfaces && i < ARRAY_SIZE(drvr->addresses);
|
|
i++) {
|
|
u8 *addr = drvr->addresses[i].addr;
|
|
|
|
memcpy(addr, drvr->mac, ETH_ALEN);
|
|
if (i) {
|
|
addr[0] |= BIT(1);
|
|
addr[ETH_ALEN - 1] ^= i;
|
|
}
|
|
}
|
|
wiphy->addresses = drvr->addresses;
|
|
wiphy->n_addresses = i;
|
|
|
|
wiphy->signal_type = CFG80211_SIGNAL_TYPE_MBM;
|
|
wiphy->cipher_suites = brcmf_cipher_suites;
|
|
wiphy->n_cipher_suites = ARRAY_SIZE(brcmf_cipher_suites);
|
|
if (!brcmf_feat_is_enabled(ifp, BRCMF_FEAT_MFP))
|
|
wiphy->n_cipher_suites--;
|
|
wiphy->bss_select_support = BIT(NL80211_BSS_SELECT_ATTR_RSSI) |
|
|
BIT(NL80211_BSS_SELECT_ATTR_BAND_PREF) |
|
|
BIT(NL80211_BSS_SELECT_ATTR_RSSI_ADJUST);
|
|
|
|
wiphy->flags |= WIPHY_FLAG_NETNS_OK |
|
|
WIPHY_FLAG_PS_ON_BY_DEFAULT |
|
|
WIPHY_FLAG_HAVE_AP_SME |
|
|
WIPHY_FLAG_OFFCHAN_TX |
|
|
WIPHY_FLAG_HAS_REMAIN_ON_CHANNEL;
|
|
if (brcmf_feat_is_enabled(ifp, BRCMF_FEAT_TDLS))
|
|
wiphy->flags |= WIPHY_FLAG_SUPPORTS_TDLS;
|
|
if (!ifp->drvr->settings->roamoff)
|
|
wiphy->flags |= WIPHY_FLAG_SUPPORTS_FW_ROAM;
|
|
if (brcmf_feat_is_enabled(ifp, BRCMF_FEAT_FWSUP)) {
|
|
wiphy_ext_feature_set(wiphy,
|
|
NL80211_EXT_FEATURE_4WAY_HANDSHAKE_STA_PSK);
|
|
wiphy_ext_feature_set(wiphy,
|
|
NL80211_EXT_FEATURE_4WAY_HANDSHAKE_STA_1X);
|
|
if (brcmf_feat_is_enabled(ifp, BRCMF_FEAT_SAE))
|
|
wiphy_ext_feature_set(wiphy,
|
|
NL80211_EXT_FEATURE_SAE_OFFLOAD);
|
|
}
|
|
if (brcmf_feat_is_enabled(ifp, BRCMF_FEAT_FWAUTH)) {
|
|
wiphy_ext_feature_set(wiphy,
|
|
NL80211_EXT_FEATURE_4WAY_HANDSHAKE_AP_PSK);
|
|
if (brcmf_feat_is_enabled(ifp, BRCMF_FEAT_SAE))
|
|
wiphy_ext_feature_set(wiphy,
|
|
NL80211_EXT_FEATURE_SAE_OFFLOAD_AP);
|
|
}
|
|
wiphy->mgmt_stypes = brcmf_txrx_stypes;
|
|
wiphy->max_remain_on_channel_duration = 5000;
|
|
if (brcmf_feat_is_enabled(ifp, BRCMF_FEAT_PNO)) {
|
|
gscan = brcmf_feat_is_enabled(ifp, BRCMF_FEAT_GSCAN);
|
|
brcmf_pno_wiphy_params(wiphy, gscan);
|
|
}
|
|
/* vendor commands/events support */
|
|
wiphy->vendor_commands = brcmf_vendor_cmds;
|
|
wiphy->n_vendor_commands = BRCMF_VNDR_CMDS_LAST - 1;
|
|
|
|
if (brcmf_feat_is_enabled(ifp, BRCMF_FEAT_WOWL))
|
|
brcmf_wiphy_wowl_params(wiphy, ifp);
|
|
err = brcmf_fil_cmd_data_get(ifp, BRCMF_C_GET_BANDLIST, &bandlist,
|
|
sizeof(bandlist));
|
|
if (err) {
|
|
bphy_err(drvr, "could not obtain band info: err=%d\n", err);
|
|
return err;
|
|
}
|
|
/* first entry in bandlist is number of bands */
|
|
n_bands = le32_to_cpu(bandlist[0]);
|
|
for (i = 1; i <= n_bands && i < ARRAY_SIZE(bandlist); i++) {
|
|
if (bandlist[i] == cpu_to_le32(WLC_BAND_2G)) {
|
|
band = kmemdup(&__wl_band_2ghz, sizeof(__wl_band_2ghz),
|
|
GFP_KERNEL);
|
|
if (!band)
|
|
return -ENOMEM;
|
|
|
|
band->channels = kmemdup(&__wl_2ghz_channels,
|
|
sizeof(__wl_2ghz_channels),
|
|
GFP_KERNEL);
|
|
if (!band->channels) {
|
|
kfree(band);
|
|
return -ENOMEM;
|
|
}
|
|
|
|
band->n_channels = ARRAY_SIZE(__wl_2ghz_channels);
|
|
wiphy->bands[NL80211_BAND_2GHZ] = band;
|
|
}
|
|
if (bandlist[i] == cpu_to_le32(WLC_BAND_5G)) {
|
|
band = kmemdup(&__wl_band_5ghz, sizeof(__wl_band_5ghz),
|
|
GFP_KERNEL);
|
|
if (!band)
|
|
return -ENOMEM;
|
|
|
|
band->channels = kmemdup(&__wl_5ghz_channels,
|
|
sizeof(__wl_5ghz_channels),
|
|
GFP_KERNEL);
|
|
if (!band->channels) {
|
|
kfree(band);
|
|
return -ENOMEM;
|
|
}
|
|
|
|
band->n_channels = ARRAY_SIZE(__wl_5ghz_channels);
|
|
wiphy->bands[NL80211_BAND_5GHZ] = band;
|
|
}
|
|
}
|
|
|
|
if (wiphy->bands[NL80211_BAND_5GHZ] &&
|
|
brcmf_feat_is_enabled(ifp, BRCMF_FEAT_DOT11H))
|
|
wiphy_ext_feature_set(wiphy,
|
|
NL80211_EXT_FEATURE_DFS_OFFLOAD);
|
|
|
|
wiphy_ext_feature_set(wiphy, NL80211_EXT_FEATURE_CQM_RSSI_LIST);
|
|
|
|
wiphy_read_of_freq_limits(wiphy);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static s32 brcmf_config_dongle(struct brcmf_cfg80211_info *cfg)
|
|
{
|
|
struct brcmf_pub *drvr = cfg->pub;
|
|
struct net_device *ndev;
|
|
struct wireless_dev *wdev;
|
|
struct brcmf_if *ifp;
|
|
s32 power_mode;
|
|
s32 err = 0;
|
|
|
|
if (cfg->dongle_up)
|
|
return err;
|
|
|
|
ndev = cfg_to_ndev(cfg);
|
|
wdev = ndev->ieee80211_ptr;
|
|
ifp = netdev_priv(ndev);
|
|
|
|
/* make sure RF is ready for work */
|
|
brcmf_fil_cmd_int_set(ifp, BRCMF_C_UP, 0);
|
|
|
|
brcmf_dongle_scantime(ifp);
|
|
|
|
power_mode = cfg->pwr_save ? PM_FAST : PM_OFF;
|
|
err = brcmf_fil_cmd_int_set(ifp, BRCMF_C_SET_PM, power_mode);
|
|
if (err)
|
|
goto default_conf_out;
|
|
brcmf_dbg(INFO, "power save set to %s\n",
|
|
(power_mode ? "enabled" : "disabled"));
|
|
|
|
err = brcmf_dongle_roam(ifp);
|
|
if (err)
|
|
goto default_conf_out;
|
|
err = brcmf_cfg80211_change_iface(wdev->wiphy, ndev, wdev->iftype,
|
|
NULL);
|
|
if (err)
|
|
goto default_conf_out;
|
|
|
|
brcmf_configure_arp_nd_offload(ifp, true);
|
|
|
|
err = brcmf_fil_cmd_int_set(ifp, BRCMF_C_SET_FAKEFRAG, 1);
|
|
if (err) {
|
|
bphy_err(drvr, "failed to set frameburst mode\n");
|
|
goto default_conf_out;
|
|
}
|
|
|
|
cfg->dongle_up = true;
|
|
default_conf_out:
|
|
|
|
return err;
|
|
|
|
}
|
|
|
|
static s32 __brcmf_cfg80211_up(struct brcmf_if *ifp)
|
|
{
|
|
set_bit(BRCMF_VIF_STATUS_READY, &ifp->vif->sme_state);
|
|
|
|
return brcmf_config_dongle(ifp->drvr->config);
|
|
}
|
|
|
|
static s32 __brcmf_cfg80211_down(struct brcmf_if *ifp)
|
|
{
|
|
struct brcmf_cfg80211_info *cfg = ifp->drvr->config;
|
|
|
|
/*
|
|
* While going down, if associated with AP disassociate
|
|
* from AP to save power
|
|
*/
|
|
if (check_vif_up(ifp->vif)) {
|
|
brcmf_link_down(ifp->vif, WLAN_REASON_UNSPECIFIED, true);
|
|
|
|
/* Make sure WPA_Supplicant receives all the event
|
|
generated due to DISASSOC call to the fw to keep
|
|
the state fw and WPA_Supplicant state consistent
|
|
*/
|
|
brcmf_delay(500);
|
|
}
|
|
|
|
brcmf_abort_scanning(cfg);
|
|
clear_bit(BRCMF_VIF_STATUS_READY, &ifp->vif->sme_state);
|
|
|
|
return 0;
|
|
}
|
|
|
|
s32 brcmf_cfg80211_up(struct net_device *ndev)
|
|
{
|
|
struct brcmf_if *ifp = netdev_priv(ndev);
|
|
struct brcmf_cfg80211_info *cfg = ifp->drvr->config;
|
|
s32 err = 0;
|
|
|
|
mutex_lock(&cfg->usr_sync);
|
|
err = __brcmf_cfg80211_up(ifp);
|
|
mutex_unlock(&cfg->usr_sync);
|
|
|
|
return err;
|
|
}
|
|
|
|
s32 brcmf_cfg80211_down(struct net_device *ndev)
|
|
{
|
|
struct brcmf_if *ifp = netdev_priv(ndev);
|
|
struct brcmf_cfg80211_info *cfg = ifp->drvr->config;
|
|
s32 err = 0;
|
|
|
|
mutex_lock(&cfg->usr_sync);
|
|
err = __brcmf_cfg80211_down(ifp);
|
|
mutex_unlock(&cfg->usr_sync);
|
|
|
|
return err;
|
|
}
|
|
|
|
enum nl80211_iftype brcmf_cfg80211_get_iftype(struct brcmf_if *ifp)
|
|
{
|
|
struct wireless_dev *wdev = &ifp->vif->wdev;
|
|
|
|
return wdev->iftype;
|
|
}
|
|
|
|
bool brcmf_get_vif_state_any(struct brcmf_cfg80211_info *cfg,
|
|
unsigned long state)
|
|
{
|
|
struct brcmf_cfg80211_vif *vif;
|
|
|
|
list_for_each_entry(vif, &cfg->vif_list, list) {
|
|
if (test_bit(state, &vif->sme_state))
|
|
return true;
|
|
}
|
|
return false;
|
|
}
|
|
|
|
static inline bool vif_event_equals(struct brcmf_cfg80211_vif_event *event,
|
|
u8 action)
|
|
{
|
|
u8 evt_action;
|
|
|
|
spin_lock(&event->vif_event_lock);
|
|
evt_action = event->action;
|
|
spin_unlock(&event->vif_event_lock);
|
|
return evt_action == action;
|
|
}
|
|
|
|
void brcmf_cfg80211_arm_vif_event(struct brcmf_cfg80211_info *cfg,
|
|
struct brcmf_cfg80211_vif *vif)
|
|
{
|
|
struct brcmf_cfg80211_vif_event *event = &cfg->vif_event;
|
|
|
|
spin_lock(&event->vif_event_lock);
|
|
event->vif = vif;
|
|
event->action = 0;
|
|
spin_unlock(&event->vif_event_lock);
|
|
}
|
|
|
|
bool brcmf_cfg80211_vif_event_armed(struct brcmf_cfg80211_info *cfg)
|
|
{
|
|
struct brcmf_cfg80211_vif_event *event = &cfg->vif_event;
|
|
bool armed;
|
|
|
|
spin_lock(&event->vif_event_lock);
|
|
armed = event->vif != NULL;
|
|
spin_unlock(&event->vif_event_lock);
|
|
|
|
return armed;
|
|
}
|
|
|
|
int brcmf_cfg80211_wait_vif_event(struct brcmf_cfg80211_info *cfg,
|
|
u8 action, ulong timeout)
|
|
{
|
|
struct brcmf_cfg80211_vif_event *event = &cfg->vif_event;
|
|
|
|
return wait_event_timeout(event->vif_wq,
|
|
vif_event_equals(event, action), timeout);
|
|
}
|
|
|
|
static bool brmcf_use_iso3166_ccode_fallback(struct brcmf_pub *drvr)
|
|
{
|
|
if (drvr->settings->trivial_ccode_map)
|
|
return true;
|
|
|
|
switch (drvr->bus_if->chip) {
|
|
case BRCM_CC_43430_CHIP_ID:
|
|
case BRCM_CC_4345_CHIP_ID:
|
|
case BRCM_CC_43602_CHIP_ID:
|
|
return true;
|
|
default:
|
|
return false;
|
|
}
|
|
}
|
|
|
|
static s32 brcmf_translate_country_code(struct brcmf_pub *drvr, char alpha2[2],
|
|
struct brcmf_fil_country_le *ccreq)
|
|
{
|
|
struct brcmfmac_pd_cc *country_codes;
|
|
struct brcmfmac_pd_cc_entry *cc;
|
|
s32 found_index;
|
|
int i;
|
|
|
|
if ((alpha2[0] == ccreq->country_abbrev[0]) &&
|
|
(alpha2[1] == ccreq->country_abbrev[1])) {
|
|
brcmf_dbg(TRACE, "Country code already set\n");
|
|
return -EAGAIN;
|
|
}
|
|
|
|
country_codes = drvr->settings->country_codes;
|
|
if (!country_codes) {
|
|
if (brmcf_use_iso3166_ccode_fallback(drvr)) {
|
|
brcmf_dbg(TRACE, "No country codes configured for device, using ISO3166 code and 0 rev\n");
|
|
memset(ccreq, 0, sizeof(*ccreq));
|
|
ccreq->country_abbrev[0] = alpha2[0];
|
|
ccreq->country_abbrev[1] = alpha2[1];
|
|
ccreq->ccode[0] = alpha2[0];
|
|
ccreq->ccode[1] = alpha2[1];
|
|
return 0;
|
|
}
|
|
|
|
brcmf_dbg(TRACE, "No country codes configured for device\n");
|
|
return -EINVAL;
|
|
}
|
|
|
|
found_index = -1;
|
|
for (i = 0; i < country_codes->table_size; i++) {
|
|
cc = &country_codes->table[i];
|
|
if ((cc->iso3166[0] == '\0') && (found_index == -1))
|
|
found_index = i;
|
|
if ((cc->iso3166[0] == alpha2[0]) &&
|
|
(cc->iso3166[1] == alpha2[1])) {
|
|
found_index = i;
|
|
break;
|
|
}
|
|
}
|
|
if (found_index == -1) {
|
|
brcmf_dbg(TRACE, "No country code match found\n");
|
|
return -EINVAL;
|
|
}
|
|
memset(ccreq, 0, sizeof(*ccreq));
|
|
ccreq->rev = cpu_to_le32(country_codes->table[found_index].rev);
|
|
memcpy(ccreq->ccode, country_codes->table[found_index].cc,
|
|
BRCMF_COUNTRY_BUF_SZ);
|
|
ccreq->country_abbrev[0] = alpha2[0];
|
|
ccreq->country_abbrev[1] = alpha2[1];
|
|
ccreq->country_abbrev[2] = 0;
|
|
|
|
return 0;
|
|
}
|
|
|
|
static void brcmf_cfg80211_reg_notifier(struct wiphy *wiphy,
|
|
struct regulatory_request *req)
|
|
{
|
|
struct brcmf_cfg80211_info *cfg = wiphy_to_cfg(wiphy);
|
|
struct brcmf_if *ifp = brcmf_get_ifp(cfg->pub, 0);
|
|
struct brcmf_pub *drvr = cfg->pub;
|
|
struct brcmf_fil_country_le ccreq;
|
|
s32 err;
|
|
int i;
|
|
|
|
/* The country code gets set to "00" by default at boot, ignore */
|
|
if (req->alpha2[0] == '0' && req->alpha2[1] == '0')
|
|
return;
|
|
|
|
/* ignore non-ISO3166 country codes */
|
|
for (i = 0; i < 2; i++)
|
|
if (req->alpha2[i] < 'A' || req->alpha2[i] > 'Z') {
|
|
bphy_err(drvr, "not an ISO3166 code (0x%02x 0x%02x)\n",
|
|
req->alpha2[0], req->alpha2[1]);
|
|
return;
|
|
}
|
|
|
|
brcmf_dbg(TRACE, "Enter: initiator=%d, alpha=%c%c\n", req->initiator,
|
|
req->alpha2[0], req->alpha2[1]);
|
|
|
|
err = brcmf_fil_iovar_data_get(ifp, "country", &ccreq, sizeof(ccreq));
|
|
if (err) {
|
|
bphy_err(drvr, "Country code iovar returned err = %d\n", err);
|
|
return;
|
|
}
|
|
|
|
err = brcmf_translate_country_code(ifp->drvr, req->alpha2, &ccreq);
|
|
if (err)
|
|
return;
|
|
|
|
err = brcmf_fil_iovar_data_set(ifp, "country", &ccreq, sizeof(ccreq));
|
|
if (err) {
|
|
bphy_err(drvr, "Firmware rejected country setting\n");
|
|
return;
|
|
}
|
|
brcmf_setup_wiphybands(cfg);
|
|
}
|
|
|
|
static void brcmf_free_wiphy(struct wiphy *wiphy)
|
|
{
|
|
int i;
|
|
|
|
if (!wiphy)
|
|
return;
|
|
|
|
if (wiphy->iface_combinations) {
|
|
for (i = 0; i < wiphy->n_iface_combinations; i++)
|
|
kfree(wiphy->iface_combinations[i].limits);
|
|
}
|
|
kfree(wiphy->iface_combinations);
|
|
if (wiphy->bands[NL80211_BAND_2GHZ]) {
|
|
kfree(wiphy->bands[NL80211_BAND_2GHZ]->channels);
|
|
kfree(wiphy->bands[NL80211_BAND_2GHZ]);
|
|
}
|
|
if (wiphy->bands[NL80211_BAND_5GHZ]) {
|
|
kfree(wiphy->bands[NL80211_BAND_5GHZ]->channels);
|
|
kfree(wiphy->bands[NL80211_BAND_5GHZ]);
|
|
}
|
|
#if IS_ENABLED(CONFIG_PM)
|
|
if (wiphy->wowlan != &brcmf_wowlan_support)
|
|
kfree(wiphy->wowlan);
|
|
#endif
|
|
}
|
|
|
|
struct brcmf_cfg80211_info *brcmf_cfg80211_attach(struct brcmf_pub *drvr,
|
|
struct cfg80211_ops *ops,
|
|
bool p2pdev_forced)
|
|
{
|
|
struct wiphy *wiphy = drvr->wiphy;
|
|
struct net_device *ndev = brcmf_get_ifp(drvr, 0)->ndev;
|
|
struct brcmf_cfg80211_info *cfg;
|
|
struct brcmf_cfg80211_vif *vif;
|
|
struct brcmf_if *ifp;
|
|
s32 err = 0;
|
|
s32 io_type;
|
|
u16 *cap = NULL;
|
|
|
|
if (!ndev) {
|
|
bphy_err(drvr, "ndev is invalid\n");
|
|
return NULL;
|
|
}
|
|
|
|
cfg = kzalloc(sizeof(*cfg), GFP_KERNEL);
|
|
if (!cfg) {
|
|
bphy_err(drvr, "Could not allocate wiphy device\n");
|
|
return NULL;
|
|
}
|
|
|
|
cfg->wiphy = wiphy;
|
|
cfg->pub = drvr;
|
|
init_vif_event(&cfg->vif_event);
|
|
INIT_LIST_HEAD(&cfg->vif_list);
|
|
|
|
vif = brcmf_alloc_vif(cfg, NL80211_IFTYPE_STATION);
|
|
if (IS_ERR(vif))
|
|
goto wiphy_out;
|
|
|
|
ifp = netdev_priv(ndev);
|
|
vif->ifp = ifp;
|
|
vif->wdev.netdev = ndev;
|
|
ndev->ieee80211_ptr = &vif->wdev;
|
|
SET_NETDEV_DEV(ndev, wiphy_dev(cfg->wiphy));
|
|
|
|
err = wl_init_priv(cfg);
|
|
if (err) {
|
|
bphy_err(drvr, "Failed to init iwm_priv (%d)\n", err);
|
|
brcmf_free_vif(vif);
|
|
goto wiphy_out;
|
|
}
|
|
ifp->vif = vif;
|
|
|
|
/* determine d11 io type before wiphy setup */
|
|
err = brcmf_fil_cmd_int_get(ifp, BRCMF_C_GET_VERSION, &io_type);
|
|
if (err) {
|
|
bphy_err(drvr, "Failed to get D11 version (%d)\n", err);
|
|
goto priv_out;
|
|
}
|
|
cfg->d11inf.io_type = (u8)io_type;
|
|
brcmu_d11_attach(&cfg->d11inf);
|
|
|
|
/* regulatory notifer below needs access to cfg so
|
|
* assign it now.
|
|
*/
|
|
drvr->config = cfg;
|
|
|
|
err = brcmf_setup_wiphy(wiphy, ifp);
|
|
if (err < 0)
|
|
goto priv_out;
|
|
|
|
brcmf_dbg(INFO, "Registering custom regulatory\n");
|
|
wiphy->reg_notifier = brcmf_cfg80211_reg_notifier;
|
|
wiphy->regulatory_flags |= REGULATORY_CUSTOM_REG;
|
|
wiphy_apply_custom_regulatory(wiphy, &brcmf_regdom);
|
|
|
|
/* firmware defaults to 40MHz disabled in 2G band. We signal
|
|
* cfg80211 here that we do and have it decide we can enable
|
|
* it. But first check if device does support 2G operation.
|
|
*/
|
|
if (wiphy->bands[NL80211_BAND_2GHZ]) {
|
|
cap = &wiphy->bands[NL80211_BAND_2GHZ]->ht_cap.cap;
|
|
*cap |= IEEE80211_HT_CAP_SUP_WIDTH_20_40;
|
|
}
|
|
#ifdef CONFIG_PM
|
|
if (brcmf_feat_is_enabled(ifp, BRCMF_FEAT_WOWL_GTK))
|
|
ops->set_rekey_data = brcmf_cfg80211_set_rekey_data;
|
|
#endif
|
|
err = wiphy_register(wiphy);
|
|
if (err < 0) {
|
|
bphy_err(drvr, "Could not register wiphy device (%d)\n", err);
|
|
goto priv_out;
|
|
}
|
|
|
|
err = brcmf_setup_wiphybands(cfg);
|
|
if (err) {
|
|
bphy_err(drvr, "Setting wiphy bands failed (%d)\n", err);
|
|
goto wiphy_unreg_out;
|
|
}
|
|
|
|
/* If cfg80211 didn't disable 40MHz HT CAP in wiphy_register(),
|
|
* setup 40MHz in 2GHz band and enable OBSS scanning.
|
|
*/
|
|
if (cap && (*cap & IEEE80211_HT_CAP_SUP_WIDTH_20_40)) {
|
|
err = brcmf_enable_bw40_2g(cfg);
|
|
if (!err)
|
|
err = brcmf_fil_iovar_int_set(ifp, "obss_coex",
|
|
BRCMF_OBSS_COEX_AUTO);
|
|
else
|
|
*cap &= ~IEEE80211_HT_CAP_SUP_WIDTH_20_40;
|
|
}
|
|
|
|
err = brcmf_fweh_activate_events(ifp);
|
|
if (err) {
|
|
bphy_err(drvr, "FWEH activation failed (%d)\n", err);
|
|
goto wiphy_unreg_out;
|
|
}
|
|
|
|
err = brcmf_p2p_attach(cfg, p2pdev_forced);
|
|
if (err) {
|
|
bphy_err(drvr, "P2P initialisation failed (%d)\n", err);
|
|
goto wiphy_unreg_out;
|
|
}
|
|
err = brcmf_btcoex_attach(cfg);
|
|
if (err) {
|
|
bphy_err(drvr, "BT-coex initialisation failed (%d)\n", err);
|
|
brcmf_p2p_detach(&cfg->p2p);
|
|
goto wiphy_unreg_out;
|
|
}
|
|
err = brcmf_pno_attach(cfg);
|
|
if (err) {
|
|
bphy_err(drvr, "PNO initialisation failed (%d)\n", err);
|
|
brcmf_btcoex_detach(cfg);
|
|
brcmf_p2p_detach(&cfg->p2p);
|
|
goto wiphy_unreg_out;
|
|
}
|
|
|
|
if (brcmf_feat_is_enabled(ifp, BRCMF_FEAT_TDLS)) {
|
|
err = brcmf_fil_iovar_int_set(ifp, "tdls_enable", 1);
|
|
if (err) {
|
|
brcmf_dbg(INFO, "TDLS not enabled (%d)\n", err);
|
|
wiphy->flags &= ~WIPHY_FLAG_SUPPORTS_TDLS;
|
|
} else {
|
|
brcmf_fweh_register(cfg->pub, BRCMF_E_TDLS_PEER_EVENT,
|
|
brcmf_notify_tdls_peer_event);
|
|
}
|
|
}
|
|
|
|
/* (re-) activate FWEH event handling */
|
|
err = brcmf_fweh_activate_events(ifp);
|
|
if (err) {
|
|
bphy_err(drvr, "FWEH activation failed (%d)\n", err);
|
|
goto detach;
|
|
}
|
|
|
|
/* Fill in some of the advertised nl80211 supported features */
|
|
if (brcmf_feat_is_enabled(ifp, BRCMF_FEAT_SCAN_RANDOM_MAC)) {
|
|
wiphy->features |= NL80211_FEATURE_SCHED_SCAN_RANDOM_MAC_ADDR;
|
|
#ifdef CONFIG_PM
|
|
if (wiphy->wowlan &&
|
|
wiphy->wowlan->flags & WIPHY_WOWLAN_NET_DETECT)
|
|
wiphy->features |= NL80211_FEATURE_ND_RANDOM_MAC_ADDR;
|
|
#endif
|
|
}
|
|
|
|
return cfg;
|
|
|
|
detach:
|
|
brcmf_pno_detach(cfg);
|
|
brcmf_btcoex_detach(cfg);
|
|
brcmf_p2p_detach(&cfg->p2p);
|
|
wiphy_unreg_out:
|
|
wiphy_unregister(cfg->wiphy);
|
|
priv_out:
|
|
wl_deinit_priv(cfg);
|
|
brcmf_free_vif(vif);
|
|
ifp->vif = NULL;
|
|
wiphy_out:
|
|
brcmf_free_wiphy(wiphy);
|
|
kfree(cfg);
|
|
return NULL;
|
|
}
|
|
|
|
void brcmf_cfg80211_detach(struct brcmf_cfg80211_info *cfg)
|
|
{
|
|
if (!cfg)
|
|
return;
|
|
|
|
brcmf_pno_detach(cfg);
|
|
brcmf_btcoex_detach(cfg);
|
|
wiphy_unregister(cfg->wiphy);
|
|
wl_deinit_priv(cfg);
|
|
brcmf_free_wiphy(cfg->wiphy);
|
|
kfree(cfg);
|
|
}
|