linuxdebug/arch/arm/mach-s3c/map-s3c.h

71 lines
1.8 KiB
C

/* SPDX-License-Identifier: GPL-2.0 */
/*
* Copyright (c) 2008 Simtec Electronics
* Ben Dooks <ben@simtec.co.uk>
*
* S3C24XX - Memory map definitions
*/
#ifndef __ASM_PLAT_MAP_S3C_H
#define __ASM_PLAT_MAP_S3C_H __FILE__
#include "map.h"
#define S3C24XX_VA_IRQ S3C_VA_IRQ
#define S3C24XX_VA_MEMCTRL S3C_VA_MEM
#define S3C24XX_VA_UART S3C_VA_UART
#define S3C24XX_VA_TIMER S3C_VA_TIMER
#define S3C24XX_VA_CLKPWR S3C_VA_SYS
#define S3C24XX_VA_WATCHDOG S3C_VA_WATCHDOG
#define S3C2412_VA_SSMC S3C_ADDR_CPU(0x00000000)
#define S3C2412_VA_EBI S3C_ADDR_CPU(0x00100000)
#define S3C2410_PA_UART (0x50000000)
#define S3C24XX_PA_UART S3C2410_PA_UART
/*
* GPIO ports
*
* the calculation for the VA of this must ensure that
* it is the same distance apart from the UART in the
* phsyical address space, as the initial mapping for the IO
* is done as a 1:1 mapping. This puts it (currently) at
* 0xFA800000, which is not in the way of any current mapping
* by the base system.
*/
#define S3C2410_PA_GPIO (0x56000000)
#define S3C24XX_PA_GPIO S3C2410_PA_GPIO
#define S3C24XX_VA_GPIO ((S3C24XX_PA_GPIO - S3C24XX_PA_UART) + S3C24XX_VA_UART)
#define S3C64XX_VA_GPIO S3C_ADDR_CPU(0x00000000)
#define S3C64XX_VA_MODEM S3C_ADDR_CPU(0x00100000)
#define S3C64XX_VA_USB_HSPHY S3C_ADDR_CPU(0x00200000)
#define S3C_VA_USB_HSPHY S3C64XX_VA_USB_HSPHY
#define S3C2410_ADDR(x) S3C_ADDR(x)
/* deal with the registers that move under the 2412/2413 */
#if defined(CONFIG_CPU_S3C2412)
#ifndef __ASSEMBLY__
extern void __iomem *s3c24xx_va_gpio2;
#endif
#ifdef CONFIG_CPU_S3C2412_ONLY
#define S3C24XX_VA_GPIO2 (S3C24XX_VA_GPIO + 0x10)
#else
#define S3C24XX_VA_GPIO2 s3c24xx_va_gpio2
#endif
#else
#define s3c24xx_va_gpio2 S3C24XX_VA_GPIO
#define S3C24XX_VA_GPIO2 S3C24XX_VA_GPIO
#endif
#include "map-s5p.h"
#endif /* __ASM_PLAT_MAP_S3C_H */