386 lines
7.9 KiB
Plaintext
386 lines
7.9 KiB
Plaintext
// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
|
|
/*
|
|
* at91-sama5d27_wlsom1.dtsi - Device Tree file for SAMA5D27 WLSOM1
|
|
*
|
|
* Copyright (C) 2019 Microchip Technology Inc. and its subsidiaries
|
|
*
|
|
* Author: Nicolas Ferre <nicolas.ferre@microcihp.com>
|
|
* Author: Eugen Hristev <eugen.hristev@microcihp.com>
|
|
*/
|
|
#include "sama5d2.dtsi"
|
|
#include "sama5d2-pinfunc.h"
|
|
#include <dt-bindings/gpio/gpio.h>
|
|
#include <dt-bindings/mfd/atmel-flexcom.h>
|
|
#include <dt-bindings/pinctrl/at91.h>
|
|
|
|
/ {
|
|
model = "Microchip SAMA5D27 WLSOM1";
|
|
compatible = "microchip,sama5d27-wlsom1", "atmel,sama5d27", "atmel,sama5d2", "atmel,sama5";
|
|
|
|
aliases {
|
|
i2c0 = &i2c0;
|
|
};
|
|
|
|
clocks {
|
|
slow_xtal {
|
|
clock-frequency = <32768>;
|
|
};
|
|
|
|
main_xtal {
|
|
clock-frequency = <24000000>;
|
|
};
|
|
};
|
|
|
|
wifi_pwrseq: wifi_pwrseq {
|
|
compatible = "mmc-pwrseq-wilc1000";
|
|
reset-gpios = <&pioA PIN_PA27 GPIO_ACTIVE_HIGH>;
|
|
powerdown-gpios = <&pioA PIN_PA29 GPIO_ACTIVE_HIGH>;
|
|
pinctrl-0 = <&pinctrl_wilc_pwrseq>;
|
|
pinctrl-names = "default";
|
|
};
|
|
};
|
|
|
|
&flx1 {
|
|
atmel,flexcom-mode = <ATMEL_FLEXCOM_MODE_USART>;
|
|
|
|
uart6: serial@200 {
|
|
pinctrl-0 = <&pinctrl_flx1_default>;
|
|
pinctrl-names = "default";
|
|
};
|
|
};
|
|
|
|
&i2c0 {
|
|
pinctrl-0 = <&pinctrl_i2c0_default>;
|
|
pinctrl-1 = <&pinctrl_i2c0_gpio>;
|
|
pinctrl-names = "default", "gpio";
|
|
sda-gpios = <&pioA PIN_PD21 GPIO_ACTIVE_HIGH>;
|
|
scl-gpios = <&pioA PIN_PD22 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
|
|
status = "okay";
|
|
};
|
|
|
|
&i2c1 {
|
|
dmas = <0>, <0>;
|
|
pinctrl-names = "default", "gpio";
|
|
pinctrl-0 = <&pinctrl_i2c1_default>;
|
|
pinctrl-1 = <&pinctrl_i2c1_gpio>;
|
|
sda-gpios = <&pioA PIN_PD19 GPIO_ACTIVE_HIGH>;
|
|
scl-gpios = <&pioA PIN_PD20 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
|
|
status = "okay";
|
|
|
|
mcp16502@5b {
|
|
compatible = "microchip,mcp16502";
|
|
reg = <0x5b>;
|
|
status = "okay";
|
|
lpm-gpios = <&pioBU 0 GPIO_ACTIVE_LOW>;
|
|
|
|
regulators {
|
|
vdd_3v3: VDD_IO {
|
|
regulator-name = "VDD_IO";
|
|
regulator-min-microvolt = <3300000>;
|
|
regulator-max-microvolt = <3300000>;
|
|
regulator-initial-mode = <2>;
|
|
regulator-allowed-modes = <2>, <4>;
|
|
regulator-always-on;
|
|
|
|
regulator-state-standby {
|
|
regulator-on-in-suspend;
|
|
regulator-mode = <4>;
|
|
};
|
|
|
|
regulator-state-mem {
|
|
regulator-off-in-suspend;
|
|
regulator-mode = <4>;
|
|
};
|
|
};
|
|
|
|
vddio_ddr: VDD_DDR {
|
|
regulator-name = "VDD_DDR";
|
|
regulator-min-microvolt = <1200000>;
|
|
regulator-max-microvolt = <1200000>;
|
|
regulator-initial-mode = <2>;
|
|
regulator-allowed-modes = <2>, <4>;
|
|
regulator-always-on;
|
|
|
|
regulator-state-standby {
|
|
regulator-on-in-suspend;
|
|
regulator-suspend-microvolt = <1200000>;
|
|
regulator-changeable-in-suspend;
|
|
regulator-mode = <4>;
|
|
};
|
|
|
|
regulator-state-mem {
|
|
regulator-on-in-suspend;
|
|
regulator-suspend-microvolt = <1200000>;
|
|
regulator-changeable-in-suspend;
|
|
regulator-mode = <4>;
|
|
};
|
|
};
|
|
|
|
vdd_core: VDD_CORE {
|
|
regulator-name = "VDD_CORE";
|
|
regulator-min-microvolt = <1250000>;
|
|
regulator-max-microvolt = <1250000>;
|
|
regulator-initial-mode = <2>;
|
|
regulator-allowed-modes = <2>, <4>;
|
|
regulator-always-on;
|
|
|
|
regulator-state-standby {
|
|
regulator-on-in-suspend;
|
|
regulator-mode = <4>;
|
|
};
|
|
|
|
regulator-state-mem {
|
|
regulator-off-in-suspend;
|
|
regulator-mode = <4>;
|
|
};
|
|
};
|
|
|
|
vdd_ddr: VDD_OTHER {
|
|
regulator-name = "VDD_OTHER";
|
|
regulator-min-microvolt = <1800000>;
|
|
regulator-max-microvolt = <1800000>;
|
|
regulator-initial-mode = <2>;
|
|
regulator-allowed-modes = <2>, <4>;
|
|
regulator-always-on;
|
|
|
|
regulator-state-standby {
|
|
regulator-on-in-suspend;
|
|
regulator-suspend-microvolt = <1800000>;
|
|
regulator-changeable-in-suspend;
|
|
regulator-mode = <4>;
|
|
};
|
|
|
|
regulator-state-mem {
|
|
regulator-on-in-suspend;
|
|
regulator-suspend-microvolt = <1800000>;
|
|
regulator-changeable-in-suspend;
|
|
regulator-mode = <4>;
|
|
};
|
|
};
|
|
|
|
LDO1 {
|
|
regulator-name = "LDO1";
|
|
regulator-min-microvolt = <3300000>;
|
|
regulator-max-microvolt = <3300000>;
|
|
regulator-always-on;
|
|
|
|
regulator-state-standby {
|
|
regulator-on-in-suspend;
|
|
};
|
|
|
|
regulator-state-mem {
|
|
regulator-off-in-suspend;
|
|
};
|
|
};
|
|
|
|
LDO2 {
|
|
regulator-name = "LDO2";
|
|
regulator-min-microvolt = <1800000>;
|
|
regulator-max-microvolt = <3300000>;
|
|
|
|
regulator-state-standby {
|
|
regulator-on-in-suspend;
|
|
};
|
|
|
|
regulator-state-mem {
|
|
regulator-off-in-suspend;
|
|
};
|
|
};
|
|
};
|
|
};
|
|
};
|
|
|
|
&macb0 {
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&pinctrl_macb0_default>;
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
phy-mode = "rmii";
|
|
|
|
ethernet-phy@0 {
|
|
reg = <0x0>;
|
|
interrupt-parent = <&pioA>;
|
|
interrupts = <PIN_PB24 IRQ_TYPE_LEVEL_LOW>;
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&pinctrl_macb0_phy_irq>;
|
|
};
|
|
};
|
|
|
|
&pmc {
|
|
atmel,osc-bypass;
|
|
};
|
|
|
|
&qspi1 {
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&pinctrl_qspi1_default>;
|
|
status = "disabled";
|
|
|
|
qspi1_flash: flash@0 {
|
|
#address-cells = <1>;
|
|
#size-cells = <1>;
|
|
compatible = "jedec,spi-nor";
|
|
reg = <0>;
|
|
spi-max-frequency = <80000000>;
|
|
spi-rx-bus-width = <4>;
|
|
spi-tx-bus-width = <4>;
|
|
m25p,fast-read;
|
|
status = "disabled";
|
|
|
|
at91bootstrap@0 {
|
|
label = "at91bootstrap";
|
|
reg = <0x0 0x40000>;
|
|
};
|
|
|
|
bootloader@40000 {
|
|
label = "bootloader";
|
|
reg = <0x40000 0xc0000>;
|
|
};
|
|
|
|
bootloaderenvred@100000 {
|
|
label = "bootloader env redundant";
|
|
reg = <0x100000 0x40000>;
|
|
};
|
|
|
|
bootloaderenv@140000 {
|
|
label = "bootloader env";
|
|
reg = <0x140000 0x40000>;
|
|
};
|
|
|
|
dtb@180000 {
|
|
label = "device tree";
|
|
reg = <0x180000 0x80000>;
|
|
};
|
|
|
|
kernel@200000 {
|
|
label = "kernel";
|
|
reg = <0x200000 0x600000>;
|
|
};
|
|
};
|
|
};
|
|
|
|
&pioA {
|
|
pinctrl_flx1_default: flx1_usart_default {
|
|
pinmux = <PIN_PA24__FLEXCOM1_IO0>,
|
|
<PIN_PA23__FLEXCOM1_IO1>,
|
|
<PIN_PA25__FLEXCOM1_IO3>,
|
|
<PIN_PA26__FLEXCOM1_IO4>;
|
|
bias-disable;
|
|
};
|
|
|
|
pinctrl_i2c0_default: i2c0_default {
|
|
pinmux = <PIN_PD21__TWD0>,
|
|
<PIN_PD22__TWCK0>;
|
|
bias-disable;
|
|
};
|
|
|
|
pinctrl_i2c0_gpio: i2c0_gpio {
|
|
pinmux = <PIN_PD21__GPIO>,
|
|
<PIN_PD22__GPIO>;
|
|
bias-disable;
|
|
};
|
|
|
|
pinctrl_i2c1_default: i2c1_default {
|
|
pinmux = <PIN_PD19__TWD1>,
|
|
<PIN_PD20__TWCK1>;
|
|
bias-disable;
|
|
};
|
|
|
|
pinctrl_i2c1_gpio: i2c1_gpio {
|
|
pinmux = <PIN_PD19__GPIO>,
|
|
<PIN_PD20__GPIO>;
|
|
bias-disable;
|
|
};
|
|
|
|
pinctrl_macb0_default: macb0_default {
|
|
pinmux = <PIN_PB14__GTXCK>,
|
|
<PIN_PB15__GTXEN>,
|
|
<PIN_PB16__GRXDV>,
|
|
<PIN_PB17__GRXER>,
|
|
<PIN_PB18__GRX0>,
|
|
<PIN_PB19__GRX1>,
|
|
<PIN_PB20__GTX0>,
|
|
<PIN_PB21__GTX1>,
|
|
<PIN_PB22__GMDC>,
|
|
<PIN_PB23__GMDIO>;
|
|
bias-disable;
|
|
};
|
|
|
|
pinctrl_macb0_phy_irq: macb0_phy_irq {
|
|
pinmux = <PIN_PB24__GPIO>;
|
|
bias-disable;
|
|
};
|
|
|
|
pinctrl_qspi1_default: qspi1_default {
|
|
pinmux = <PIN_PB5__QSPI1_SCK>,
|
|
<PIN_PB6__QSPI1_CS>,
|
|
<PIN_PB7__QSPI1_IO0>,
|
|
<PIN_PB8__QSPI1_IO1>,
|
|
<PIN_PB9__QSPI1_IO2>,
|
|
<PIN_PB10__QSPI1_IO3>;
|
|
bias-pull-up;
|
|
};
|
|
|
|
pinctrl_sdmmc1_default: sdmmc1_default {
|
|
cmd-data {
|
|
pinmux = <PIN_PA28__SDMMC1_CMD>,
|
|
<PIN_PA18__SDMMC1_DAT0>,
|
|
<PIN_PA19__SDMMC1_DAT1>,
|
|
<PIN_PA20__SDMMC1_DAT2>,
|
|
<PIN_PA21__SDMMC1_DAT3>;
|
|
bias-disable;
|
|
};
|
|
|
|
conf-ck {
|
|
pinmux = <PIN_PA22__SDMMC1_CK>;
|
|
bias-disable;
|
|
};
|
|
};
|
|
|
|
pinctrl_wilc_default: wilc_default {
|
|
conf-irq {
|
|
pinmux = <PIN_PB25__GPIO>;
|
|
bias-disable;
|
|
};
|
|
};
|
|
|
|
pinctrl_wilc_pwrseq: wilc_pwrseq {
|
|
conf-ce-nrst {
|
|
pinmux = <PIN_PA27__GPIO>,
|
|
<PIN_PA29__GPIO>;
|
|
bias-disable;
|
|
};
|
|
|
|
conf-rtcclk {
|
|
pinmux = <PIN_PB13__PCK1>;
|
|
bias-disable;
|
|
};
|
|
};
|
|
};
|
|
|
|
&sdmmc1 {
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
bus-width = <4>;
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&pinctrl_sdmmc1_default>;
|
|
mmc-pwrseq = <&wifi_pwrseq>;
|
|
no-1-8-v;
|
|
non-removable;
|
|
bus-width = <4>;
|
|
status = "okay";
|
|
|
|
wilc: wifi@0 {
|
|
reg = <0>;
|
|
compatible = "microchip,wilc1000";
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&pinctrl_wilc_default>;
|
|
clocks = <&pmc PMC_TYPE_SYSTEM 9>;
|
|
clock-names = "rtc";
|
|
interrupts = <PIN_PB25 IRQ_TYPE_NONE>;
|
|
interrupt-parent = <&pioA>;
|
|
assigned-clocks = <&pmc PMC_TYPE_SYSTEM 9>;
|
|
assigned-clock-rates = <32768>;
|
|
};
|
|
};
|
|
|