405 lines
9.7 KiB
YAML
405 lines
9.7 KiB
YAML
# SPDX-License-Identifier: GPL-2.0
|
|
%YAML 1.2
|
|
---
|
|
$id: http://devicetree.org/schemas/mfd/x-powers,axp152.yaml#
|
|
$schema: http://devicetree.org/meta-schemas/core.yaml#
|
|
|
|
title: X-Powers AXP PMIC
|
|
|
|
maintainers:
|
|
- Chen-Yu Tsai <wens@csie.org>
|
|
|
|
allOf:
|
|
- if:
|
|
properties:
|
|
compatible:
|
|
contains:
|
|
enum:
|
|
- x-powers,axp152
|
|
- x-powers,axp202
|
|
- x-powers,axp209
|
|
|
|
then:
|
|
properties:
|
|
regulators:
|
|
properties:
|
|
x-powers,dcdc-freq:
|
|
minimum: 750
|
|
maximum: 1875
|
|
default: 1500
|
|
|
|
else:
|
|
properties:
|
|
regulators:
|
|
properties:
|
|
x-powers,dcdc-freq:
|
|
minimum: 1800
|
|
maximum: 4050
|
|
default: 3000
|
|
|
|
- if:
|
|
properties:
|
|
compatible:
|
|
contains:
|
|
enum:
|
|
- x-powers,axp152
|
|
- x-powers,axp202
|
|
- x-powers,axp209
|
|
|
|
then:
|
|
not:
|
|
required:
|
|
- x-powers,drive-vbus-en
|
|
|
|
- if:
|
|
not:
|
|
properties:
|
|
compatible:
|
|
contains:
|
|
const: x-powers,axp806
|
|
|
|
then:
|
|
allOf:
|
|
- not:
|
|
required:
|
|
- x-powers,self-working-mode
|
|
|
|
- not:
|
|
required:
|
|
- x-powers,master-mode
|
|
|
|
- if:
|
|
not:
|
|
properties:
|
|
compatible:
|
|
contains:
|
|
const: x-powers,axp305
|
|
|
|
then:
|
|
required:
|
|
- interrupts
|
|
|
|
properties:
|
|
compatible:
|
|
oneOf:
|
|
- enum:
|
|
- x-powers,axp152
|
|
- x-powers,axp202
|
|
- x-powers,axp209
|
|
- x-powers,axp221
|
|
- x-powers,axp223
|
|
- x-powers,axp803
|
|
- x-powers,axp806
|
|
- x-powers,axp809
|
|
- x-powers,axp813
|
|
- items:
|
|
- const: x-powers,axp228
|
|
- const: x-powers,axp221
|
|
- items:
|
|
- const: x-powers,axp805
|
|
- const: x-powers,axp806
|
|
- items:
|
|
- const: x-powers,axp305
|
|
- const: x-powers,axp805
|
|
- const: x-powers,axp806
|
|
- items:
|
|
- const: x-powers,axp818
|
|
- const: x-powers,axp813
|
|
|
|
reg:
|
|
maxItems: 1
|
|
|
|
interrupts:
|
|
maxItems: 1
|
|
|
|
interrupt-controller: true
|
|
|
|
"#interrupt-cells":
|
|
const: 1
|
|
|
|
x-powers,drive-vbus-en:
|
|
type: boolean
|
|
description: >
|
|
Set this when the N_VBUSEN pin is used as an output pin to control an
|
|
external regulator to drive the OTG VBus, rather then as an input pin
|
|
which signals whether the board is driving OTG VBus or not.
|
|
|
|
x-powers,self-working-mode:
|
|
type: boolean
|
|
description: >
|
|
Set this when the PMIC is wired for self-working mode through the MODESET
|
|
pin.
|
|
|
|
x-powers,master-mode:
|
|
type: boolean
|
|
description: >
|
|
Set this when the PMIC is wired for master mode through the MODESET pin.
|
|
|
|
vin1-supply:
|
|
description: >
|
|
DCDC1 power supply node, if present.
|
|
|
|
vin2-supply:
|
|
description: >
|
|
DCDC2 power supply node, if present.
|
|
|
|
vin3-supply:
|
|
description: >
|
|
DCDC3 power supply node, if present.
|
|
|
|
vin4-supply:
|
|
description: >
|
|
DCDC4 power supply node, if present.
|
|
|
|
vin5-supply:
|
|
description: >
|
|
DCDC5 power supply node, if present.
|
|
|
|
vin6-supply:
|
|
description: >
|
|
DCDC6 power supply node, if present.
|
|
|
|
vin7-supply:
|
|
description: >
|
|
DCDC7 power supply node, if present.
|
|
|
|
vina-supply:
|
|
description: >
|
|
DCDCA power supply node, if present.
|
|
|
|
vinb-supply:
|
|
description: >
|
|
DCDCB power supply node, if present.
|
|
|
|
vinc-supply:
|
|
description: >
|
|
DCDCC power supply node, if present.
|
|
|
|
vind-supply:
|
|
description: >
|
|
DCDCD power supply node, if present.
|
|
|
|
vine-supply:
|
|
description: >
|
|
DCDCE power supply node, if present.
|
|
|
|
acin-supply:
|
|
description: >
|
|
LDO1 power supply node, if present.
|
|
|
|
ldo24in-supply:
|
|
description: >
|
|
LDO2 and LDO4 power supply node, if present.
|
|
|
|
ldo3in-supply:
|
|
description: >
|
|
LDO3 power supply node, if present.
|
|
|
|
ldo5in-supply:
|
|
description: >
|
|
LDO5 power supply node, if present.
|
|
|
|
aldoin-supply:
|
|
description: >
|
|
ALDO* power supply node, if present.
|
|
|
|
bldoin-supply:
|
|
description: >
|
|
BLDO* power supply node, if present.
|
|
|
|
cldoin-supply:
|
|
description: >
|
|
CLDO* power supply node, if present.
|
|
|
|
dldoin-supply:
|
|
description: >
|
|
DLDO* power supply node, if present.
|
|
|
|
eldoin-supply:
|
|
description: >
|
|
ELDO* power supply node, if present.
|
|
|
|
fldoin-supply:
|
|
description: >
|
|
FLDO* power supply node, if present.
|
|
|
|
ips-supply:
|
|
description: >
|
|
LDO_IO0, LDO_IO1 and RTC_LDO power supply node, if present.
|
|
|
|
drivevbus-supply:
|
|
description: >
|
|
DRIVEVBUS power supply node, if present.
|
|
|
|
swin-supply:
|
|
description: >
|
|
SW power supply node, if present.
|
|
|
|
adc:
|
|
$ref: /schemas/iio/adc/x-powers,axp209-adc.yaml#
|
|
|
|
gpio:
|
|
$ref: /schemas/gpio/x-powers,axp209-gpio.yaml#
|
|
|
|
ac-power:
|
|
$ref: /schemas/power/supply/x-powers,axp20x-ac-power-supply.yaml#
|
|
|
|
battery-power:
|
|
$ref: /schemas/power/supply/x-powers,axp20x-battery-power-supply.yaml#
|
|
|
|
usb-power:
|
|
$ref: /schemas/power/supply/x-powers,axp20x-usb-power-supply.yaml#
|
|
|
|
regulators:
|
|
type: object
|
|
|
|
properties:
|
|
x-powers,dcdc-freq:
|
|
$ref: /schemas/types.yaml#/definitions/uint32
|
|
description: >
|
|
Defines the work frequency of DC-DC in kHz.
|
|
|
|
patternProperties:
|
|
"^(([a-f])?ldo[0-9]|dcdc[0-7a-e]|ldo(_|-)io(0|1)|(dc1)?sw|rtc(_|-)ldo|drivevbus|dc5ldo)$":
|
|
$ref: /schemas/regulator/regulator.yaml#
|
|
type: object
|
|
unevaluatedProperties: false
|
|
|
|
properties:
|
|
regulator-ramp-delay:
|
|
description: >
|
|
Only 800 and 1600 are valid for the DCDC2 and LDO3 regulators on
|
|
the AXP209.
|
|
|
|
regulator-soft-start:
|
|
description: >
|
|
Only valid for the LDO3 regulator.
|
|
|
|
x-powers,dcdc-workmode:
|
|
$ref: /schemas/types.yaml#/definitions/uint32
|
|
enum: [0, 1]
|
|
description: >
|
|
Only valid for DCDC regulators. Setup 1 for PWM mode, 0
|
|
for AUTO (PWM/PFM) mode. The DCDC regulators work in a
|
|
mixed PWM/PFM mode, using PFM under light loads and
|
|
switching to PWM for heavier loads. Forcing PWM mode
|
|
trades efficiency under light loads for lower output
|
|
noise. This probably makes sense for HiFi audio related
|
|
applications that aren't battery constrained.
|
|
|
|
additionalProperties: false
|
|
|
|
required:
|
|
- compatible
|
|
- reg
|
|
- "#interrupt-cells"
|
|
- interrupt-controller
|
|
|
|
additionalProperties: false
|
|
|
|
examples:
|
|
- |
|
|
i2c0 {
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
|
|
pmic@30 {
|
|
compatible = "x-powers,axp152";
|
|
reg = <0x30>;
|
|
interrupts = <0>;
|
|
interrupt-controller;
|
|
#interrupt-cells = <1>;
|
|
};
|
|
};
|
|
|
|
- |
|
|
#include <dt-bindings/interrupt-controller/irq.h>
|
|
|
|
i2c0 {
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
|
|
pmic@34 {
|
|
compatible = "x-powers,axp209";
|
|
reg = <0x34>;
|
|
interrupt-parent = <&nmi_intc>;
|
|
interrupts = <0 IRQ_TYPE_LEVEL_LOW>;
|
|
interrupt-controller;
|
|
#interrupt-cells = <1>;
|
|
|
|
ac_power_supply: ac-power {
|
|
compatible = "x-powers,axp202-ac-power-supply";
|
|
};
|
|
|
|
axp_adc: adc {
|
|
compatible = "x-powers,axp209-adc";
|
|
#io-channel-cells = <1>;
|
|
};
|
|
|
|
axp_gpio: gpio {
|
|
compatible = "x-powers,axp209-gpio";
|
|
gpio-controller;
|
|
#gpio-cells = <2>;
|
|
|
|
gpio0-adc-pin {
|
|
pins = "GPIO0";
|
|
function = "adc";
|
|
};
|
|
};
|
|
|
|
battery_power_supply: battery-power {
|
|
compatible = "x-powers,axp209-battery-power-supply";
|
|
};
|
|
|
|
regulators {
|
|
/* Default work frequency for buck regulators */
|
|
x-powers,dcdc-freq = <1500>;
|
|
|
|
reg_dcdc2: dcdc2 {
|
|
regulator-always-on;
|
|
regulator-min-microvolt = <1000000>;
|
|
regulator-max-microvolt = <1450000>;
|
|
regulator-name = "vdd-cpu";
|
|
};
|
|
|
|
reg_dcdc3: dcdc3 {
|
|
regulator-always-on;
|
|
regulator-min-microvolt = <1000000>;
|
|
regulator-max-microvolt = <1400000>;
|
|
regulator-name = "vdd-int-dll";
|
|
};
|
|
|
|
reg_ldo1: ldo1 {
|
|
/* LDO1 is a fixed output regulator */
|
|
regulator-always-on;
|
|
regulator-min-microvolt = <1300000>;
|
|
regulator-max-microvolt = <1300000>;
|
|
regulator-name = "vdd-rtc";
|
|
};
|
|
|
|
reg_ldo2: ldo2 {
|
|
regulator-always-on;
|
|
regulator-min-microvolt = <3000000>;
|
|
regulator-max-microvolt = <3000000>;
|
|
regulator-name = "avcc";
|
|
};
|
|
|
|
reg_ldo3: ldo3 {
|
|
regulator-name = "ldo3";
|
|
};
|
|
|
|
reg_ldo4: ldo4 {
|
|
regulator-name = "ldo4";
|
|
};
|
|
|
|
reg_ldo5: ldo5 {
|
|
regulator-name = "ldo5";
|
|
};
|
|
};
|
|
|
|
usb_power_supply: usb-power {
|
|
compatible = "x-powers,axp202-usb-power-supply";
|
|
};
|
|
};
|
|
};
|