128 lines
3.2 KiB
YAML
128 lines
3.2 KiB
YAML
# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
|
|
%YAML 1.2
|
|
---
|
|
$id: http://devicetree.org/schemas/mfd/rohm,bd9571mwv.yaml#
|
|
$schema: http://devicetree.org/meta-schemas/core.yaml#
|
|
|
|
title: ROHM BD9571MWV/BD9574MWF Power Management Integrated Circuit (PMIC)
|
|
|
|
maintainers:
|
|
- Marek Vasut <marek.vasut@gmail.com>
|
|
|
|
properties:
|
|
compatible:
|
|
enum:
|
|
- rohm,bd9571mwv
|
|
- rohm,bd9574mwf
|
|
|
|
reg:
|
|
maxItems: 1
|
|
|
|
interrupts:
|
|
maxItems: 1
|
|
|
|
interrupt-controller: true
|
|
|
|
'#interrupt-cells':
|
|
const: 2
|
|
|
|
gpio-controller: true
|
|
|
|
'#gpio-cells':
|
|
const: 2
|
|
|
|
rohm,ddr-backup-power:
|
|
$ref: /schemas/types.yaml#/definitions/uint32
|
|
minimum: 0x0
|
|
maximum: 0xf
|
|
description: |
|
|
Value to use for DDR-Backup Power (default 0).
|
|
This is a bitmask that specifies which DDR power rails need to be kept
|
|
powered when backup mode is entered, for system suspend:
|
|
- bit 0: DDR0
|
|
- bit 1: DDR1
|
|
- bit 2: DDR0C
|
|
- bit 3: DDR1C
|
|
These bits match the KEEPON_DDR* bits in the documentation for the "BKUP
|
|
Mode Cnt" register.
|
|
|
|
rohm,rstbmode-level:
|
|
$ref: /schemas/types.yaml#/definitions/flag
|
|
description:
|
|
The RSTB signal is configured for level mode, to accommodate a toggle
|
|
power switch (the RSTBMODE pin is strapped low).
|
|
|
|
rohm,rstbmode-pulse:
|
|
$ref: /schemas/types.yaml#/definitions/flag
|
|
description:
|
|
The RSTB signal is configured for pulse mode, to accommodate a momentary
|
|
power switch (the RSTBMODE pin is strapped high).
|
|
|
|
regulators:
|
|
type: object
|
|
description:
|
|
List of child nodes that specify the regulator initialization data.
|
|
Child nodes must be named after their hardware counterparts.
|
|
|
|
patternProperties:
|
|
"^(vd09|vd18|vd25|vd33|dvfs)$":
|
|
type: object
|
|
$ref: ../regulator/regulator.yaml#
|
|
|
|
properties:
|
|
regulator-name:
|
|
pattern: "^(vd09|vd18|vd25|vd33|dvfs)$"
|
|
|
|
unevaluatedProperties: false
|
|
|
|
additionalProperties: false
|
|
|
|
additionalProperties: false
|
|
|
|
required:
|
|
- compatible
|
|
- reg
|
|
- interrupts
|
|
- interrupt-controller
|
|
- '#interrupt-cells'
|
|
- gpio-controller
|
|
- '#gpio-cells'
|
|
|
|
oneOf:
|
|
- required:
|
|
- rohm,rstbmode-level
|
|
- required:
|
|
- rohm,rstbmode-pulse
|
|
|
|
examples:
|
|
- |
|
|
#include <dt-bindings/interrupt-controller/irq.h>
|
|
|
|
i2c {
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
|
|
pmic: pmic@30 {
|
|
compatible = "rohm,bd9571mwv";
|
|
reg = <0x30>;
|
|
interrupt-parent = <&gpio2>;
|
|
interrupts = <0 IRQ_TYPE_LEVEL_LOW>;
|
|
interrupt-controller;
|
|
#interrupt-cells = <2>;
|
|
gpio-controller;
|
|
#gpio-cells = <2>;
|
|
rohm,ddr-backup-power = <0xf>;
|
|
rohm,rstbmode-pulse;
|
|
|
|
regulators {
|
|
dvfs: dvfs {
|
|
regulator-name = "dvfs";
|
|
regulator-min-microvolt = <750000>;
|
|
regulator-max-microvolt = <1030000>;
|
|
regulator-boot-on;
|
|
regulator-always-on;
|
|
};
|
|
};
|
|
};
|
|
};
|