263 lines
6.0 KiB
YAML
263 lines
6.0 KiB
YAML
# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
|
|
%YAML 1.2
|
|
---
|
|
$id: http://devicetree.org/schemas/leds/backlight/qcom-wled.yaml#
|
|
$schema: http://devicetree.org/meta-schemas/core.yaml#
|
|
|
|
title: Binding for Qualcomm Technologies, Inc. WLED driver
|
|
|
|
maintainers:
|
|
- Bjorn Andersson <bjorn.andersson@linaro.org>
|
|
- Kiran Gunda <kgunda@codeaurora.org>
|
|
|
|
description: |
|
|
WLED (White Light Emitting Diode) driver is used for controlling display
|
|
backlight that is part of PMIC on Qualcomm Technologies, Inc. reference
|
|
platforms. The PMIC is connected to the host processor via SPMI bus.
|
|
|
|
properties:
|
|
compatible:
|
|
enum:
|
|
- qcom,pm8941-wled
|
|
- qcom,pmi8994-wled
|
|
- qcom,pmi8998-wled
|
|
- qcom,pm660l-wled
|
|
- qcom,pm6150l-wled
|
|
- qcom,pm8150l-wled
|
|
|
|
reg:
|
|
minItems: 1
|
|
maxItems: 2
|
|
|
|
default-brightness:
|
|
description: |
|
|
brightness value on boot.
|
|
|
|
label: true
|
|
|
|
max-brightness:
|
|
description: |
|
|
Maximum brightness level.
|
|
|
|
qcom,cs-out:
|
|
description: |
|
|
enable current sink output.
|
|
This property is supported only for WLED3.
|
|
type: boolean
|
|
|
|
qcom,cabc:
|
|
description: |
|
|
enable content adaptive backlight control.
|
|
type: boolean
|
|
|
|
qcom,ext-gen:
|
|
description: |
|
|
use externally generated modulator signal to dim.
|
|
This property is supported only for WLED3.
|
|
type: boolean
|
|
|
|
qcom,current-limit:
|
|
description: |
|
|
mA; per-string current limit.
|
|
This property is supported only for WLED3.
|
|
$ref: /schemas/types.yaml#/definitions/uint32
|
|
default: 20
|
|
minimum: 0
|
|
maximum: 25
|
|
|
|
qcom,current-limit-microamp:
|
|
description: |
|
|
uA; per-string current limit.
|
|
default: 25
|
|
minimum: 0
|
|
maximum: 30000
|
|
multipleOf: 25
|
|
|
|
qcom,current-boost-limit:
|
|
description: |
|
|
mA; boost current limit.
|
|
$ref: /schemas/types.yaml#/definitions/uint32
|
|
|
|
qcom,switching-freq:
|
|
description: |
|
|
kHz; switching frequency.
|
|
$ref: /schemas/types.yaml#/definitions/uint32
|
|
enum: [ 600, 640, 685, 738, 800, 872, 960, 1066, 1200, 1371, 1600, 1920,
|
|
2400, 3200, 4800, 9600 ]
|
|
|
|
qcom,ovp:
|
|
description: |
|
|
V; Over-voltage protection limit.
|
|
This property is supported only for WLED3.
|
|
$ref: /schemas/types.yaml#/definitions/uint32
|
|
enum: [ 27, 29, 32, 35 ]
|
|
default: 29
|
|
|
|
qcom,ovp-millivolt:
|
|
description: |
|
|
Over-voltage protection limit. This property is for WLED4 only.
|
|
$ref: /schemas/types.yaml#/definitions/uint32
|
|
enum: [ 18100, 19600, 29600, 31100 ]
|
|
default: 29600
|
|
|
|
qcom,num-strings:
|
|
description: |
|
|
number of led strings attached.
|
|
$ref: /schemas/types.yaml#/definitions/uint32
|
|
|
|
qcom,enabled-strings:
|
|
description: |
|
|
Array of the WLED strings numbered from 0 to 3. Each
|
|
string of leds are operated individually. Specify the
|
|
list of strings used by the device. Any combination of
|
|
led strings can be used.
|
|
$ref: /schemas/types.yaml#/definitions/uint32-array
|
|
minItems: 1
|
|
maxItems: 4
|
|
|
|
qcom,external-pfet:
|
|
description: |
|
|
Specify if external PFET control for short circuit
|
|
protection is used. This property is supported only
|
|
for WLED4.
|
|
type: boolean
|
|
|
|
qcom,auto-string-detection:
|
|
description: |
|
|
Enables auto-detection of the WLED string configuration.
|
|
This feature is not supported for WLED3.
|
|
type: boolean
|
|
|
|
interrupts:
|
|
minItems: 1
|
|
items:
|
|
- description: over voltage protection interrupt.
|
|
- description: short circuit interrupt.
|
|
|
|
interrupt-names:
|
|
minItems: 1
|
|
items:
|
|
- const: ovp
|
|
- const: short
|
|
|
|
qcom,modulator-sel:
|
|
description: |
|
|
Selects the modulator used for brightness modulation.
|
|
Allowed values are,
|
|
0 - Modulator A
|
|
1 - Modulator B
|
|
This property is applicable only to WLED5 peripheral.
|
|
$ref: /schemas/types.yaml#/definitions/uint32
|
|
enum: [ 0, 1 ]
|
|
default: 0
|
|
|
|
qcom,cabc-sel:
|
|
description: |
|
|
Selects the CABC pin signal used for brightness modulation.
|
|
Allowed values are,
|
|
0 - CABC disabled
|
|
1 - CABC 1
|
|
2 - CABC 2
|
|
3 - External signal (e.g. LPG) is used for dimming
|
|
This property is applicable only to WLED5 peripheral.
|
|
$ref: /schemas/types.yaml#/definitions/uint32
|
|
enum: [ 0, 1, 2, 3 ]
|
|
|
|
allOf:
|
|
- if:
|
|
properties:
|
|
compatible:
|
|
contains:
|
|
const: qcom,pm8941-wled
|
|
|
|
then:
|
|
properties:
|
|
reg:
|
|
maxItems: 1
|
|
|
|
qcom,current-boost-limit:
|
|
enum: [ 105, 385, 525, 805, 980, 1260, 1400, 1680 ]
|
|
default: 805
|
|
|
|
qcom,switching-freq:
|
|
default: 1600
|
|
|
|
qcom,num-strings:
|
|
enum: [ 1, 2, 3 ]
|
|
|
|
interrupts:
|
|
maxItems: 1
|
|
|
|
interrupt-names:
|
|
maxItems: 1
|
|
|
|
else:
|
|
properties:
|
|
reg:
|
|
minItems: 2
|
|
|
|
qcom,current-boost-limit:
|
|
enum: [ 105, 280, 450, 620, 970, 1150, 1300, 1500 ]
|
|
default: 970
|
|
|
|
qcom,switching-freq:
|
|
default: 800
|
|
|
|
qcom,num-strings:
|
|
enum: [ 1, 2, 3, 4 ]
|
|
|
|
interrupts:
|
|
minItems: 2
|
|
|
|
interrupt-names:
|
|
minItems: 2
|
|
- if:
|
|
properties:
|
|
compatible:
|
|
contains:
|
|
enum:
|
|
- qcom,pm8150l-wled
|
|
|
|
then:
|
|
properties:
|
|
default-brightness:
|
|
minimum: 0
|
|
maximum: 32767
|
|
|
|
max-brightness:
|
|
minimum: 0
|
|
maximum: 32767
|
|
|
|
else:
|
|
properties:
|
|
default-brightness:
|
|
minimum: 0
|
|
maximum: 4095
|
|
|
|
max-brightness:
|
|
minimum: 0
|
|
maximum: 4095
|
|
|
|
required:
|
|
- compatible
|
|
- reg
|
|
- label
|
|
|
|
additionalProperties: false
|
|
|
|
examples:
|
|
- |
|
|
backlight@d800 {
|
|
compatible = "qcom,pm8941-wled";
|
|
reg = <0xd800 0x100>;
|
|
label = "backlight";
|
|
|
|
qcom,cs-out;
|
|
qcom,current-limit = <20>;
|
|
qcom,current-boost-limit = <805>;
|
|
qcom,switching-freq = <1600>;
|
|
qcom,ovp = <29>;
|
|
qcom,num-strings = <2>;
|
|
qcom,enabled-strings = <0 1>;
|
|
};
|