129 lines
3.2 KiB
YAML
129 lines
3.2 KiB
YAML
# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
|
|
%YAML 1.2
|
|
---
|
|
$id: http://devicetree.org/schemas/input/touchscreen/ti,tsc2005.yaml#
|
|
$schema: http://devicetree.org/meta-schemas/core.yaml#
|
|
|
|
title: Texas Instruments TSC2004 and TSC2005 touchscreen controller bindings
|
|
|
|
maintainers:
|
|
- Marek Vasut <marex@denx.de>
|
|
- Michael Welling <mwelling@ieee.org>
|
|
|
|
properties:
|
|
$nodename:
|
|
pattern: "^touchscreen(@.*)?$"
|
|
|
|
compatible:
|
|
enum:
|
|
- ti,tsc2004
|
|
- ti,tsc2005
|
|
|
|
reg:
|
|
maxItems: 1
|
|
description: |
|
|
I2C address when used on the I2C bus, or the SPI chip select index
|
|
when used on the SPI bus
|
|
|
|
interrupts:
|
|
maxItems: 1
|
|
|
|
reset-gpios:
|
|
maxItems: 1
|
|
description: GPIO specifier for the controller reset line
|
|
|
|
spi-max-frequency:
|
|
description: TSC2005 SPI bus clock frequency.
|
|
maximum: 25000000
|
|
|
|
ti,x-plate-ohms:
|
|
description: resistance of the touchscreen's X plates in ohm (defaults to 280)
|
|
|
|
ti,esd-recovery-timeout-ms:
|
|
description: |
|
|
if the touchscreen does not respond after the configured time
|
|
(in milli seconds), the driver will reset it. This is disabled
|
|
by default.
|
|
|
|
vio-supply:
|
|
description: Regulator specifier
|
|
|
|
touchscreen-fuzz-pressure: true
|
|
touchscreen-fuzz-x: true
|
|
touchscreen-fuzz-y: true
|
|
touchscreen-max-pressure: true
|
|
touchscreen-size-x: true
|
|
touchscreen-size-y: true
|
|
|
|
allOf:
|
|
- $ref: touchscreen.yaml#
|
|
- if:
|
|
properties:
|
|
compatible:
|
|
contains:
|
|
const: ti,tsc2004
|
|
then:
|
|
properties:
|
|
spi-max-frequency: false
|
|
|
|
additionalProperties: false
|
|
|
|
required:
|
|
- compatible
|
|
- reg
|
|
- interrupts
|
|
|
|
examples:
|
|
- |
|
|
#include <dt-bindings/interrupt-controller/irq.h>
|
|
#include <dt-bindings/gpio/gpio.h>
|
|
i2c {
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
touchscreen@48 {
|
|
compatible = "ti,tsc2004";
|
|
reg = <0x48>;
|
|
vio-supply = <&vio>;
|
|
|
|
reset-gpios = <&gpio4 8 GPIO_ACTIVE_HIGH>;
|
|
interrupts-extended = <&gpio1 27 IRQ_TYPE_EDGE_RISING>;
|
|
|
|
touchscreen-fuzz-x = <4>;
|
|
touchscreen-fuzz-y = <7>;
|
|
touchscreen-fuzz-pressure = <2>;
|
|
touchscreen-size-x = <4096>;
|
|
touchscreen-size-y = <4096>;
|
|
touchscreen-max-pressure = <2048>;
|
|
|
|
ti,x-plate-ohms = <280>;
|
|
ti,esd-recovery-timeout-ms = <8000>;
|
|
};
|
|
};
|
|
- |
|
|
#include <dt-bindings/interrupt-controller/irq.h>
|
|
#include <dt-bindings/gpio/gpio.h>
|
|
spi {
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
touchscreen@0 {
|
|
compatible = "ti,tsc2005";
|
|
spi-max-frequency = <6000000>;
|
|
reg = <0>;
|
|
|
|
vio-supply = <&vio>;
|
|
|
|
reset-gpios = <&gpio4 8 GPIO_ACTIVE_HIGH>; /* 104 */
|
|
interrupts-extended = <&gpio4 4 IRQ_TYPE_EDGE_RISING>; /* 100 */
|
|
|
|
touchscreen-fuzz-x = <4>;
|
|
touchscreen-fuzz-y = <7>;
|
|
touchscreen-fuzz-pressure = <2>;
|
|
touchscreen-size-x = <4096>;
|
|
touchscreen-size-y = <4096>;
|
|
touchscreen-max-pressure = <2048>;
|
|
|
|
ti,x-plate-ohms = <280>;
|
|
ti,esd-recovery-timeout-ms = <8000>;
|
|
};
|
|
};
|