167 lines
4.7 KiB
YAML
167 lines
4.7 KiB
YAML
# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
|
|
%YAML 1.2
|
|
---
|
|
$id: http://devicetree.org/schemas/iio/adc/qcom,pm8018-adc.yaml#
|
|
$schema: http://devicetree.org/meta-schemas/core.yaml#
|
|
|
|
title: Qualcomm's PM8xxx voltage XOADC
|
|
|
|
maintainers:
|
|
- Linus Walleij <linus.walleij@linaro.org>
|
|
|
|
description: |
|
|
The Qualcomm PM8xxx PMICs contain a HK/XO ADC (Housekeeping/Crystal
|
|
oscillator ADC) encompassing PM8018, PM8038, PM8058 and PM8921.
|
|
|
|
properties:
|
|
compatible:
|
|
enum:
|
|
- qcom,pm8018-adc
|
|
- qcom,pm8038-adc
|
|
- qcom,pm8058-adc
|
|
- qcom,pm8921-adc
|
|
|
|
reg:
|
|
maxItems: 1
|
|
description:
|
|
ADC base address in the PMIC, typically 0x197.
|
|
|
|
xoadc-ref-supply:
|
|
description:
|
|
The reference voltage may vary with PMIC variant but is typically
|
|
something like 2.2 or 1.8V.
|
|
|
|
interrupts:
|
|
maxItems: 1
|
|
|
|
"#address-cells":
|
|
const: 2
|
|
description:
|
|
The first cell is the prescaler (on PM8058) or premux (on PM8921)
|
|
with two valid bits so legal values are 0x00, 0x01 or 0x02.
|
|
The second cell is the main analog mux setting (0x00..0x0f).
|
|
The combination of prescaler/premux and analog mux uniquely addresses
|
|
a hardware channel on all systems.
|
|
|
|
"#size-cells":
|
|
const: 0
|
|
|
|
"#io-channel-cells":
|
|
const: 2
|
|
description:
|
|
The cells are precaler or premux followed by the analog muxing line.
|
|
|
|
additionalProperties: false
|
|
|
|
required:
|
|
- compatible
|
|
- reg
|
|
- "#io-channel-cells"
|
|
- "#address-cells"
|
|
- "#size-cells"
|
|
- adc-channel@c
|
|
- adc-channel@d
|
|
- adc-channel@f
|
|
|
|
patternProperties:
|
|
"^(adc-channel@)[0-9a-f]$":
|
|
type: object
|
|
description: |
|
|
ADC channel specific configuration.
|
|
Note that channels c, d and f must be present for calibration.
|
|
These three nodes are used for absolute and ratiometric calibration
|
|
and only need to have these reg values: they are by hardware definition
|
|
1:1 ratio converters that sample 625, 1250 and 0 milliV and create
|
|
an interpolation calibration for all other ADCs.
|
|
|
|
properties:
|
|
reg:
|
|
maxItems: 1
|
|
|
|
qcom,decimation:
|
|
$ref: /schemas/types.yaml#/definitions/uint32
|
|
description: |
|
|
This parameter is used to decrease the ADC sampling rate.
|
|
Quicker measurements can be made by reducing the decimation ratio.
|
|
Valid values are 512, 1024, 2048, 4096.
|
|
If the property is not found, a default value of 512 will be used.
|
|
|
|
qcom,ratiometric:
|
|
$ref: /schemas/types.yaml#/definitions/uint32
|
|
description: |
|
|
Channel calibration type. If this property is specified
|
|
VADC will use a special voltage references for channel
|
|
calibration. The available references are specified in the
|
|
as a u32 value setting (see below) and it is compulsory
|
|
to also specify this reference if ratiometric calibration
|
|
is selected.
|
|
|
|
If the property is not found, the channel will be
|
|
calibrated with the 0.625V and 1.25V reference channels, also
|
|
known as an absolute calibration.
|
|
|
|
The reference voltage pairs when using ratiometric calibration:
|
|
0 = XO_IN/XOADC_GND
|
|
1 = PMIC_IN/XOADC_GND
|
|
2 = PMIC_IN/BMS_CSP
|
|
3 (invalid)
|
|
4 = XOADC_GND/XOADC_GND
|
|
5 = XOADC_VREF/XOADC_GND
|
|
|
|
additionalProperties: false
|
|
|
|
required:
|
|
- reg
|
|
|
|
examples:
|
|
- |
|
|
#include <dt-bindings/interrupt-controller/irq.h>
|
|
pmic {
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
|
|
adc@197 {
|
|
compatible = "qcom,pm8058-adc";
|
|
reg = <0x197>;
|
|
interrupts-extended = <&pm8058 76 IRQ_TYPE_EDGE_RISING>;
|
|
#address-cells = <2>;
|
|
#size-cells = <0>;
|
|
#io-channel-cells = <2>;
|
|
|
|
vcoin: adc-channel@0 {
|
|
reg = <0x00 0x00>;
|
|
};
|
|
vbat: adc-channel@1 {
|
|
reg = <0x00 0x01>;
|
|
};
|
|
dcin: adc-channel@2 {
|
|
reg = <0x00 0x02>;
|
|
};
|
|
ichg: adc-channel@3 {
|
|
reg = <0x00 0x03>;
|
|
};
|
|
vph_pwr: adc-channel@4 {
|
|
reg = <0x00 0x04>;
|
|
};
|
|
usb_vbus: adc-channel@a {
|
|
reg = <0x00 0x0a>;
|
|
};
|
|
die_temp: adc-channel@b {
|
|
reg = <0x00 0x0b>;
|
|
};
|
|
ref_625mv: adc-channel@c {
|
|
reg = <0x00 0x0c>;
|
|
};
|
|
ref_1250mv: adc-channel@d {
|
|
reg = <0x00 0x0d>;
|
|
};
|
|
ref_325mv: adc-channel@e {
|
|
reg = <0x00 0x0e>;
|
|
};
|
|
ref_muxoff: adc-channel@f {
|
|
reg = <0x00 0x0f>;
|
|
};
|
|
};
|
|
};
|
|
...
|