linuxdebug/Documentation/devicetree/bindings/display/rockchip/cdn-dp-rockchip.txt

75 lines
2.2 KiB
Plaintext

Rockchip RK3399 specific extensions to the cdn Display Port
================================
Required properties:
- compatible: must be "rockchip,rk3399-cdn-dp"
- reg: physical base address of the controller and length
- clocks: from common clock binding: handle to dp clock.
- clock-names: from common clock binding:
Required elements: "core-clk" "pclk" "spdif" "grf"
- resets : a list of phandle + reset specifier pairs
- reset-names : string of reset names
Required elements: "apb", "core", "dptx", "spdif"
- power-domains : power-domain property defined with a phandle
to respective power domain.
- assigned-clocks: main clock, should be <&cru SCLK_DP_CORE>
- assigned-clock-rates : the DP core clk frequency, shall be: 100000000
- rockchip,grf: this soc should set GRF regs, so need get grf here.
- ports: contain a port nodes with endpoint definitions as defined in
Documentation/devicetree/bindings/media/video-interfaces.txt.
contained 2 endpoints, connecting to the output of vop.
- phys: from general PHY binding: the phandle for the PHY device.
- extcon: extcon specifier for the Power Delivery
- #sound-dai-cells = it must be 1 if your system is using 2 DAIs: I2S, SPDIF
-------------------------------------------------------------------------------
Example:
cdn_dp: dp@fec00000 {
compatible = "rockchip,rk3399-cdn-dp";
reg = <0x0 0xfec00000 0x0 0x100000>;
interrupts = <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&cru SCLK_DP_CORE>, <&cru PCLK_DP_CTRL>,
<&cru SCLK_SPDIF_REC_DPTX>, <&cru PCLK_VIO_GRF>;
clock-names = "core-clk", "pclk", "spdif", "grf";
assigned-clocks = <&cru SCLK_DP_CORE>;
assigned-clock-rates = <100000000>;
power-domains = <&power RK3399_PD_HDCP>;
phys = <&tcphy0_dp>, <&tcphy1_dp>;
resets = <&cru SRST_DPTX_SPDIF_REC>;
reset-names = "spdif";
extcon = <&fusb0>, <&fusb1>;
rockchip,grf = <&grf>;
#address-cells = <1>;
#size-cells = <0>;
#sound-dai-cells = <1>;
ports {
#address-cells = <1>;
#size-cells = <0>;
dp_in: port {
#address-cells = <1>;
#size-cells = <0>;
dp_in_vopb: endpoint@0 {
reg = <0>;
remote-endpoint = <&vopb_out_dp>;
};
dp_in_vopl: endpoint@1 {
reg = <1>;
remote-endpoint = <&vopl_out_dp>;
};
};
};
};