58 lines
1.6 KiB
Plaintext
58 lines
1.6 KiB
Plaintext
Freescale imx21 Framebuffer
|
|
|
|
This framebuffer driver supports devices imx1, imx21, imx25, and imx27.
|
|
|
|
Required properties:
|
|
- compatible : "fsl,<chip>-fb", chip should be imx1 or imx21
|
|
- reg : Should contain 1 register ranges(address and length)
|
|
- interrupts : One interrupt of the fb dev
|
|
|
|
Required nodes:
|
|
- display: Phandle to a display node as described in
|
|
Documentation/devicetree/bindings/display/panel/display-timing.txt
|
|
Additional, the display node has to define properties:
|
|
- bits-per-pixel: Bits per pixel
|
|
- fsl,pcr: LCDC PCR value
|
|
A display node may optionally define
|
|
- fsl,aus-mode: boolean to enable AUS mode (only for imx21)
|
|
|
|
Optional properties:
|
|
- lcd-supply: Regulator for LCD supply voltage.
|
|
- fsl,dmacr: DMA Control Register value. This is optional. By default, the
|
|
register is not modified as recommended by the datasheet.
|
|
- fsl,lpccr: Contrast Control Register value. This property provides the
|
|
default value for the contrast control register.
|
|
If that property is omitted, the register is zeroed.
|
|
- fsl,lscr1: LCDC Sharp Configuration Register value.
|
|
|
|
Example:
|
|
|
|
imxfb: fb@10021000 {
|
|
compatible = "fsl,imx21-fb";
|
|
interrupts = <61>;
|
|
reg = <0x10021000 0x1000>;
|
|
display = <&display0>;
|
|
};
|
|
|
|
...
|
|
|
|
display0: display0 {
|
|
model = "Primeview-PD050VL1";
|
|
bits-per-pixel = <16>;
|
|
fsl,pcr = <0xf0c88080>; /* non-standard but required */
|
|
display-timings {
|
|
native-mode = <&timing_disp0>;
|
|
timing_disp0: 640x480 {
|
|
hactive = <640>;
|
|
vactive = <480>;
|
|
hback-porch = <112>;
|
|
hfront-porch = <36>;
|
|
hsync-len = <32>;
|
|
vback-porch = <33>;
|
|
vfront-porch = <33>;
|
|
vsync-len = <2>;
|
|
clock-frequency = <25000000>;
|
|
};
|
|
};
|
|
};
|