239 lines
6.4 KiB
Plaintext
239 lines
6.4 KiB
Plaintext
==========================================
|
|
ARM CPUs capacity bindings
|
|
==========================================
|
|
|
|
==========================================
|
|
1 - Introduction
|
|
==========================================
|
|
|
|
ARM systems may be configured to have cpus with different power/performance
|
|
characteristics within the same chip. In this case, additional information has
|
|
to be made available to the kernel for it to be aware of such differences and
|
|
take decisions accordingly.
|
|
|
|
==========================================
|
|
2 - CPU capacity definition
|
|
==========================================
|
|
|
|
CPU capacity is a number that provides the scheduler information about CPUs
|
|
heterogeneity. Such heterogeneity can come from micro-architectural differences
|
|
(e.g., ARM big.LITTLE systems) or maximum frequency at which CPUs can run
|
|
(e.g., SMP systems with multiple frequency domains). Heterogeneity in this
|
|
context is about differing performance characteristics; this binding tries to
|
|
capture a first-order approximation of the relative performance of CPUs.
|
|
|
|
CPU capacities are obtained by running a suitable benchmark. This binding makes
|
|
no guarantees on the validity or suitability of any particular benchmark, the
|
|
final capacity should, however, be:
|
|
|
|
* A "single-threaded" or CPU affine benchmark
|
|
* Divided by the running frequency of the CPU executing the benchmark
|
|
* Not subject to dynamic frequency scaling of the CPU
|
|
|
|
For the time being we however advise usage of the Dhrystone benchmark. What
|
|
above thus becomes:
|
|
|
|
CPU capacities are obtained by running the Dhrystone benchmark on each CPU at
|
|
max frequency (with caches enabled). The obtained DMIPS score is then divided
|
|
by the frequency (in MHz) at which the benchmark has been run, so that
|
|
DMIPS/MHz are obtained. Such values are then normalized w.r.t. the highest
|
|
score obtained in the system.
|
|
|
|
==========================================
|
|
3 - capacity-dmips-mhz
|
|
==========================================
|
|
|
|
capacity-dmips-mhz is an optional cpu node [1] property: u32 value
|
|
representing CPU capacity expressed in normalized DMIPS/MHz. At boot time, the
|
|
maximum frequency available to the cpu is then used to calculate the capacity
|
|
value internally used by the kernel.
|
|
|
|
capacity-dmips-mhz property is all-or-nothing: if it is specified for a cpu
|
|
node, it has to be specified for every other cpu nodes, or the system will
|
|
fall back to the default capacity value for every CPU. If cpufreq is not
|
|
available, final capacities are calculated by directly using capacity-dmips-
|
|
mhz values (normalized w.r.t. the highest value found while parsing the DT).
|
|
|
|
===========================================
|
|
4 - Examples
|
|
===========================================
|
|
|
|
Example 1 (ARM 64-bit, 6-cpu system, two clusters):
|
|
The capacities-dmips-mhz or DMIPS/MHz values (scaled to 1024)
|
|
are 1024 and 578 for cluster0 and cluster1. Further normalization
|
|
is done by the operating system based on cluster0@max-freq=1100 and
|
|
cluster1@max-freq=850, final capacities are 1024 for cluster0 and
|
|
446 for cluster1 (578*850/1100).
|
|
|
|
cpus {
|
|
#address-cells = <2>;
|
|
#size-cells = <0>;
|
|
|
|
cpu-map {
|
|
cluster0 {
|
|
core0 {
|
|
cpu = <&A57_0>;
|
|
};
|
|
core1 {
|
|
cpu = <&A57_1>;
|
|
};
|
|
};
|
|
|
|
cluster1 {
|
|
core0 {
|
|
cpu = <&A53_0>;
|
|
};
|
|
core1 {
|
|
cpu = <&A53_1>;
|
|
};
|
|
core2 {
|
|
cpu = <&A53_2>;
|
|
};
|
|
core3 {
|
|
cpu = <&A53_3>;
|
|
};
|
|
};
|
|
};
|
|
|
|
idle-states {
|
|
entry-method = "psci";
|
|
|
|
CPU_SLEEP_0: cpu-sleep-0 {
|
|
compatible = "arm,idle-state";
|
|
arm,psci-suspend-param = <0x0010000>;
|
|
local-timer-stop;
|
|
entry-latency-us = <100>;
|
|
exit-latency-us = <250>;
|
|
min-residency-us = <150>;
|
|
};
|
|
|
|
CLUSTER_SLEEP_0: cluster-sleep-0 {
|
|
compatible = "arm,idle-state";
|
|
arm,psci-suspend-param = <0x1010000>;
|
|
local-timer-stop;
|
|
entry-latency-us = <800>;
|
|
exit-latency-us = <700>;
|
|
min-residency-us = <2500>;
|
|
};
|
|
};
|
|
|
|
A57_0: cpu@0 {
|
|
compatible = "arm,cortex-a57";
|
|
reg = <0x0 0x0>;
|
|
device_type = "cpu";
|
|
enable-method = "psci";
|
|
next-level-cache = <&A57_L2>;
|
|
clocks = <&scpi_dvfs 0>;
|
|
cpu-idle-states = <&CPU_SLEEP_0 &CLUSTER_SLEEP_0>;
|
|
capacity-dmips-mhz = <1024>;
|
|
};
|
|
|
|
A57_1: cpu@1 {
|
|
compatible = "arm,cortex-a57";
|
|
reg = <0x0 0x1>;
|
|
device_type = "cpu";
|
|
enable-method = "psci";
|
|
next-level-cache = <&A57_L2>;
|
|
clocks = <&scpi_dvfs 0>;
|
|
cpu-idle-states = <&CPU_SLEEP_0 &CLUSTER_SLEEP_0>;
|
|
capacity-dmips-mhz = <1024>;
|
|
};
|
|
|
|
A53_0: cpu@100 {
|
|
compatible = "arm,cortex-a53";
|
|
reg = <0x0 0x100>;
|
|
device_type = "cpu";
|
|
enable-method = "psci";
|
|
next-level-cache = <&A53_L2>;
|
|
clocks = <&scpi_dvfs 1>;
|
|
cpu-idle-states = <&CPU_SLEEP_0 &CLUSTER_SLEEP_0>;
|
|
capacity-dmips-mhz = <578>;
|
|
};
|
|
|
|
A53_1: cpu@101 {
|
|
compatible = "arm,cortex-a53";
|
|
reg = <0x0 0x101>;
|
|
device_type = "cpu";
|
|
enable-method = "psci";
|
|
next-level-cache = <&A53_L2>;
|
|
clocks = <&scpi_dvfs 1>;
|
|
cpu-idle-states = <&CPU_SLEEP_0 &CLUSTER_SLEEP_0>;
|
|
capacity-dmips-mhz = <578>;
|
|
};
|
|
|
|
A53_2: cpu@102 {
|
|
compatible = "arm,cortex-a53";
|
|
reg = <0x0 0x102>;
|
|
device_type = "cpu";
|
|
enable-method = "psci";
|
|
next-level-cache = <&A53_L2>;
|
|
clocks = <&scpi_dvfs 1>;
|
|
cpu-idle-states = <&CPU_SLEEP_0 &CLUSTER_SLEEP_0>;
|
|
capacity-dmips-mhz = <578>;
|
|
};
|
|
|
|
A53_3: cpu@103 {
|
|
compatible = "arm,cortex-a53";
|
|
reg = <0x0 0x103>;
|
|
device_type = "cpu";
|
|
enable-method = "psci";
|
|
next-level-cache = <&A53_L2>;
|
|
clocks = <&scpi_dvfs 1>;
|
|
cpu-idle-states = <&CPU_SLEEP_0 &CLUSTER_SLEEP_0>;
|
|
capacity-dmips-mhz = <578>;
|
|
};
|
|
|
|
A57_L2: l2-cache0 {
|
|
compatible = "cache";
|
|
};
|
|
|
|
A53_L2: l2-cache1 {
|
|
compatible = "cache";
|
|
};
|
|
};
|
|
|
|
Example 2 (ARM 32-bit, 4-cpu system, two clusters,
|
|
cpus 0,1@1GHz, cpus 2,3@500MHz):
|
|
capacities-dmips-mhz are scaled w.r.t. 2 (cpu@0 and cpu@1), this means that first
|
|
cpu@0 and cpu@1 are twice fast than cpu@2 and cpu@3 (at the same frequency)
|
|
|
|
cpus {
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
|
|
cpu0: cpu@0 {
|
|
device_type = "cpu";
|
|
compatible = "arm,cortex-a15";
|
|
reg = <0>;
|
|
capacity-dmips-mhz = <2>;
|
|
};
|
|
|
|
cpu1: cpu@1 {
|
|
device_type = "cpu";
|
|
compatible = "arm,cortex-a15";
|
|
reg = <1>;
|
|
capacity-dmips-mhz = <2>;
|
|
};
|
|
|
|
cpu2: cpu@2 {
|
|
device_type = "cpu";
|
|
compatible = "arm,cortex-a15";
|
|
reg = <0x100>;
|
|
capacity-dmips-mhz = <1>;
|
|
};
|
|
|
|
cpu3: cpu@3 {
|
|
device_type = "cpu";
|
|
compatible = "arm,cortex-a15";
|
|
reg = <0x101>;
|
|
capacity-dmips-mhz = <1>;
|
|
};
|
|
};
|
|
|
|
===========================================
|
|
5 - References
|
|
===========================================
|
|
|
|
[1] ARM Linux Kernel documentation - CPUs bindings
|
|
Documentation/devicetree/bindings/arm/cpus.yaml
|