335 lines
11 KiB
YAML
335 lines
11 KiB
YAML
# SPDX-License-Identifier: GPL-2.0-only or BSD-2-Clause
|
|
# Copyright 2019 Linaro Ltd.
|
|
%YAML 1.2
|
|
---
|
|
$id: http://devicetree.org/schemas/arm/arm,coresight-cti.yaml#
|
|
$schema: http://devicetree.org/meta-schemas/core.yaml#
|
|
|
|
title: ARM Coresight Cross Trigger Interface (CTI) device.
|
|
|
|
description: |
|
|
The CoreSight Embedded Cross Trigger (ECT) consists of CTI devices connected
|
|
to one or more CoreSight components and/or a CPU, with CTIs interconnected in
|
|
a star topology via the Cross Trigger Matrix (CTM), which is not programmable.
|
|
The ECT components are not part of the trace generation data path and are thus
|
|
not part of the CoreSight graph.
|
|
|
|
The CTI component properties define the connections between the individual
|
|
CTI and the components it is directly connected to, consisting of input and
|
|
output hardware trigger signals. CTIs can have a maximum number of input and
|
|
output hardware trigger signals (8 each for v1 CTI, 32 each for v2 CTI). The
|
|
number is defined at design time, the maximum of each defined in the DEVID
|
|
register.
|
|
|
|
CTIs are interconnected in a star topology via the CTM, using a number of
|
|
programmable channels, usually 4, but again implementation defined and
|
|
described in the DEVID register. The star topology is not required to be
|
|
described in the bindings as the actual connections are software
|
|
programmable.
|
|
|
|
In general the connections between CTI and components via the trigger signals
|
|
are implementation defined, except when the CTI is connected to an ARM v8
|
|
architecture core and optional ETM.
|
|
|
|
In this case the ARM v8 architecture defines the required signal connections
|
|
between CTI and the CPU core and ETM if present. In the case of a v8
|
|
architecturally connected CTI an additional compatible string is used to
|
|
indicate this feature (arm,coresight-cti-v8-arch).
|
|
|
|
When CTI trigger connection information is unavailable then a minimal driver
|
|
binding can be declared with no explicit trigger signals. This will result
|
|
the driver detecting the maximum available triggers and channels from the
|
|
DEVID register and make them all available for use as a single default
|
|
connection. Any user / client application will require additional information
|
|
on the connections between the CTI and other components for correct operation.
|
|
This information might be found by enabling the Integration Test registers in
|
|
the driver (set CONFIG_CORESIGHT_CTI_INTEGRATION_TEST in Kernel
|
|
configuration). These registers may be used to explore the trigger connections
|
|
between CTI and other CoreSight components.
|
|
|
|
Certain triggers between CoreSight devices and the CTI have specific types
|
|
and usages. These can be defined along with the signal indexes with the
|
|
constants defined in <dt-bindings/arm/coresight-cti-dt.h>
|
|
|
|
For example a CTI connected to a core will usually have a DBGREQ signal. This
|
|
is defined in the binding as type PE_EDBGREQ. These types will appear in an
|
|
optional array alongside the signal indexes. Omitting types will default all
|
|
signals to GEN_IO.
|
|
|
|
Note that some hardware trigger signals can be connected to non-CoreSight
|
|
components (e.g. UART etc) depending on hardware implementation.
|
|
|
|
maintainers:
|
|
- Mike Leach <mike.leach@linaro.org>
|
|
|
|
allOf:
|
|
- $ref: /schemas/arm/primecell.yaml#
|
|
|
|
# Need a custom select here or 'arm,primecell' will match on lots of nodes
|
|
select:
|
|
properties:
|
|
compatible:
|
|
contains:
|
|
enum:
|
|
- arm,coresight-cti
|
|
required:
|
|
- compatible
|
|
|
|
properties:
|
|
$nodename:
|
|
pattern: "^cti(@[0-9a-f]+)$"
|
|
compatible:
|
|
oneOf:
|
|
- items:
|
|
- const: arm,coresight-cti
|
|
- const: arm,primecell
|
|
- items:
|
|
- const: arm,coresight-cti-v8-arch
|
|
- const: arm,coresight-cti
|
|
- const: arm,primecell
|
|
|
|
reg:
|
|
maxItems: 1
|
|
|
|
cpu:
|
|
$ref: /schemas/types.yaml#/definitions/phandle
|
|
description:
|
|
Handle to cpu this device is associated with. This must appear in the
|
|
base cti node if compatible string arm,coresight-cti-v8-arch is used,
|
|
or may appear in a trig-conns child node when appropriate.
|
|
|
|
power-domains:
|
|
maxItems: 1
|
|
|
|
arm,cti-ctm-id:
|
|
$ref: /schemas/types.yaml#/definitions/uint32
|
|
description:
|
|
Defines the CTM this CTI is connected to, in large systems with multiple
|
|
separate CTI/CTM nets. Typically multi-socket systems where the CTM is
|
|
propagated between sockets.
|
|
|
|
arm,cs-dev-assoc:
|
|
$ref: /schemas/types.yaml#/definitions/phandle
|
|
description:
|
|
defines a phandle reference to an associated CoreSight trace device.
|
|
When the associated trace device is enabled, then the respective CTI
|
|
will be enabled. Use in a trig-conns node, or in CTI base node when
|
|
compatible string arm,coresight-cti-v8-arch used. If the associated
|
|
device has not been registered then the node name will be stored as
|
|
the connection name for later resolution. If the associated device is
|
|
not a CoreSight device or not registered then the node name will remain
|
|
the connection name and automatic enabling will not occur.
|
|
|
|
# size cells and address cells required if trig-conns node present.
|
|
"#size-cells":
|
|
const: 0
|
|
|
|
"#address-cells":
|
|
const: 1
|
|
|
|
patternProperties:
|
|
'^trig-conns@([0-9]+)$':
|
|
type: object
|
|
description:
|
|
A trigger connections child node which describes the trigger signals
|
|
between this CTI and another hardware device. This device may be a CPU,
|
|
CoreSight device, any other hardware device or simple external IO lines.
|
|
The connection may have both input and output triggers, or only one or the
|
|
other.
|
|
|
|
properties:
|
|
reg:
|
|
maxItems: 1
|
|
|
|
arm,trig-in-sigs:
|
|
$ref: /schemas/types.yaml#/definitions/uint32-array
|
|
minItems: 1
|
|
maxItems: 32
|
|
description:
|
|
List of CTI trigger in signal numbers in use by a trig-conns node.
|
|
|
|
arm,trig-in-types:
|
|
$ref: /schemas/types.yaml#/definitions/uint32-array
|
|
minItems: 1
|
|
maxItems: 32
|
|
description:
|
|
List of constants representing the types for the CTI trigger in
|
|
signals. Types in this array match to the corresponding signal in the
|
|
arm,trig-in-sigs array. If the -types array is smaller, or omitted
|
|
completely, then the types will default to GEN_IO.
|
|
|
|
arm,trig-out-sigs:
|
|
$ref: /schemas/types.yaml#/definitions/uint32-array
|
|
minItems: 1
|
|
maxItems: 32
|
|
description:
|
|
List of CTI trigger out signal numbers in use by a trig-conns node.
|
|
|
|
arm,trig-out-types:
|
|
$ref: /schemas/types.yaml#/definitions/uint32-array
|
|
minItems: 1
|
|
maxItems: 32
|
|
description:
|
|
List of constants representing the types for the CTI trigger out
|
|
signals. Types in this array match to the corresponding signal
|
|
in the arm,trig-out-sigs array. If the "-types" array is smaller,
|
|
or omitted completely, then the types will default to GEN_IO.
|
|
|
|
arm,trig-filters:
|
|
$ref: /schemas/types.yaml#/definitions/uint32-array
|
|
minItems: 1
|
|
maxItems: 32
|
|
description:
|
|
List of CTI trigger out signals that will be blocked from becoming
|
|
active, unless filtering is disabled on the driver.
|
|
|
|
arm,trig-conn-name:
|
|
$ref: /schemas/types.yaml#/definitions/string
|
|
description:
|
|
Defines a connection name that will be displayed, if the cpu or
|
|
arm,cs-dev-assoc properties are not being used in this connection.
|
|
Principle use for CTI that are connected to non-CoreSight devices, or
|
|
external IO.
|
|
|
|
anyOf:
|
|
- required:
|
|
- arm,trig-in-sigs
|
|
- required:
|
|
- arm,trig-out-sigs
|
|
oneOf:
|
|
- required:
|
|
- arm,trig-conn-name
|
|
- required:
|
|
- cpu
|
|
- required:
|
|
- arm,cs-dev-assoc
|
|
required:
|
|
- reg
|
|
|
|
required:
|
|
- compatible
|
|
- reg
|
|
- clocks
|
|
- clock-names
|
|
|
|
if:
|
|
properties:
|
|
compatible:
|
|
contains:
|
|
const: arm,coresight-cti-v8-arch
|
|
|
|
then:
|
|
required:
|
|
- cpu
|
|
|
|
unevaluatedProperties: false
|
|
|
|
examples:
|
|
# minimum CTI definition. DEVID register used to set number of triggers.
|
|
- |
|
|
cti@20020000 {
|
|
compatible = "arm,coresight-cti", "arm,primecell";
|
|
reg = <0x20020000 0x1000>;
|
|
|
|
clocks = <&soc_smc50mhz>;
|
|
clock-names = "apb_pclk";
|
|
};
|
|
# v8 architecturally defined CTI - CPU + ETM connections generated by the
|
|
# driver according to the v8 architecture specification.
|
|
- |
|
|
cti@859000 {
|
|
compatible = "arm,coresight-cti-v8-arch", "arm,coresight-cti",
|
|
"arm,primecell";
|
|
reg = <0x859000 0x1000>;
|
|
|
|
clocks = <&soc_smc50mhz>;
|
|
clock-names = "apb_pclk";
|
|
|
|
cpu = <&CPU1>;
|
|
arm,cs-dev-assoc = <&etm1>;
|
|
};
|
|
# Implementation defined CTI - CPU + ETM connections explicitly defined..
|
|
# Shows use of type constants from dt-bindings/arm/coresight-cti-dt.h
|
|
# #size-cells and #address-cells are required if trig-conns@ nodes present.
|
|
- |
|
|
#include <dt-bindings/arm/coresight-cti-dt.h>
|
|
|
|
cti@858000 {
|
|
compatible = "arm,coresight-cti", "arm,primecell";
|
|
reg = <0x858000 0x1000>;
|
|
|
|
clocks = <&soc_smc50mhz>;
|
|
clock-names = "apb_pclk";
|
|
|
|
arm,cti-ctm-id = <1>;
|
|
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
|
|
trig-conns@0 {
|
|
reg = <0>;
|
|
arm,trig-in-sigs = <4 5 6 7>;
|
|
arm,trig-in-types = <ETM_EXTOUT
|
|
ETM_EXTOUT
|
|
ETM_EXTOUT
|
|
ETM_EXTOUT>;
|
|
arm,trig-out-sigs = <4 5 6 7>;
|
|
arm,trig-out-types = <ETM_EXTIN
|
|
ETM_EXTIN
|
|
ETM_EXTIN
|
|
ETM_EXTIN>;
|
|
arm,cs-dev-assoc = <&etm0>;
|
|
};
|
|
|
|
trig-conns@1 {
|
|
reg = <1>;
|
|
cpu = <&CPU0>;
|
|
arm,trig-in-sigs = <0 1>;
|
|
arm,trig-in-types = <PE_DBGTRIGGER
|
|
PE_PMUIRQ>;
|
|
arm,trig-out-sigs=<0 1 2 >;
|
|
arm,trig-out-types = <PE_EDBGREQ
|
|
PE_DBGRESTART
|
|
PE_CTIIRQ>;
|
|
|
|
arm,trig-filters = <0>;
|
|
};
|
|
};
|
|
# Implementation defined CTI - non CoreSight component connections.
|
|
- |
|
|
cti@20110000 {
|
|
compatible = "arm,coresight-cti", "arm,primecell";
|
|
reg = <0x20110000 0x1000>;
|
|
|
|
clocks = <&soc_smc50mhz>;
|
|
clock-names = "apb_pclk";
|
|
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
|
|
trig-conns@0 {
|
|
reg = <0>;
|
|
arm,trig-in-sigs=<0>;
|
|
arm,trig-in-types=<GEN_INTREQ>;
|
|
arm,trig-out-sigs=<0>;
|
|
arm,trig-out-types=<GEN_HALTREQ>;
|
|
arm,trig-conn-name = "sys_profiler";
|
|
};
|
|
|
|
trig-conns@1 {
|
|
reg = <1>;
|
|
arm,trig-out-sigs=<2 3>;
|
|
arm,trig-out-types=<GEN_HALTREQ GEN_RESTARTREQ>;
|
|
arm,trig-conn-name = "watchdog";
|
|
};
|
|
|
|
trig-conns@2 {
|
|
reg = <2>;
|
|
arm,trig-in-sigs=<1 6>;
|
|
arm,trig-in-types=<GEN_HALTREQ GEN_RESTARTREQ>;
|
|
arm,trig-conn-name = "g_counter";
|
|
};
|
|
};
|
|
|
|
...
|