87 lines
3.0 KiB
Plaintext
87 lines
3.0 KiB
Plaintext
What: /sys/bus/iio/devices/iio:deviceX/out_voltageY_dither_en
|
|
KernelVersion: 5.18
|
|
Contact: linux-iio@vger.kernel.org
|
|
Description:
|
|
Dither enable. Write 1 to enable dither or 0 to disable it. This is useful
|
|
for changing the dither parameters. They way it should be done is:
|
|
|
|
- disable dither operation;
|
|
- change dither parameters (eg: frequency, phase...);
|
|
- enabled dither operation
|
|
|
|
What: /sys/bus/iio/devices/iio:deviceX/out_voltageY_dither_raw
|
|
KernelVersion: 5.18
|
|
Contact: linux-iio@vger.kernel.org
|
|
Description:
|
|
This raw, unscaled value refers to the dither signal amplitude.
|
|
The same scale as in out_voltageY_raw applies. However, the
|
|
offset might be different as it's always 0 for this attribute.
|
|
|
|
What: /sys/bus/iio/devices/iio:deviceX/out_voltageY_dither_raw_available
|
|
KernelVersion: 5.18
|
|
Contact: linux-iio@vger.kernel.org
|
|
Description:
|
|
Available range for dither raw amplitude values.
|
|
|
|
What: /sys/bus/iio/devices/iio:deviceX/out_voltageY_dither_offset
|
|
KernelVersion: 5.18
|
|
Contact: linux-iio@vger.kernel.org
|
|
Description:
|
|
Offset applied to out_voltageY_dither_raw. Read only attribute
|
|
always set to 0.
|
|
|
|
What: /sys/bus/iio/devices/iio:deviceX/out_voltageY_dither_frequency
|
|
KernelVersion: 5.18
|
|
Contact: linux-iio@vger.kernel.org
|
|
Description:
|
|
Sets the dither signal frequency. Units are in Hz.
|
|
|
|
What: /sys/bus/iio/devices/iio:deviceX/out_voltageY_dither_frequency_available
|
|
KernelVersion: 5.18
|
|
Contact: linux-iio@vger.kernel.org
|
|
Description:
|
|
Returns the available values for the dither frequency.
|
|
|
|
What: /sys/bus/iio/devices/iio:deviceX/out_voltageY_dither_phase
|
|
KernelVersion: 5.18
|
|
Contact: linux-iio@vger.kernel.org
|
|
Description:
|
|
Sets the dither signal phase. Units are in Radians.
|
|
|
|
What: /sys/bus/iio/devices/iio:deviceX/out_voltageY_dither_phase_available
|
|
KernelVersion: 5.18
|
|
Contact: linux-iio@vger.kernel.org
|
|
Description:
|
|
Returns the available values for the dither phase.
|
|
|
|
What: /sys/bus/iio/devices/iio:deviceX/out_voltageY_toggle_en
|
|
KernelVersion: 5.18
|
|
Contact: linux-iio@vger.kernel.org
|
|
Description:
|
|
Toggle enable. Write 1 to enable toggle or 0 to disable it. This is
|
|
useful when one wants to change the DAC output codes. The way it should
|
|
be done is:
|
|
|
|
- disable toggle operation;
|
|
- change out_voltageY_raw0 and out_voltageY_raw1;
|
|
- enable toggle operation.
|
|
|
|
What: /sys/bus/iio/devices/iio:deviceX/out_voltageY_raw0
|
|
What: /sys/bus/iio/devices/iio:deviceX/out_voltageY_raw1
|
|
KernelVersion: 5.18
|
|
Contact: linux-iio@vger.kernel.org
|
|
Description:
|
|
It has the same meaning as out_voltageY_raw. This attribute is
|
|
specific to toggle enabled channels and refers to the DAC output
|
|
code in INPUT_A (_raw0) and INPUT_B (_raw1). The same scale and offset
|
|
as in out_voltageY_raw applies.
|
|
|
|
What: /sys/bus/iio/devices/iio:deviceX/out_voltageY_symbol
|
|
KernelVersion: 5.18
|
|
Contact: linux-iio@vger.kernel.org
|
|
Description:
|
|
Performs a SW toggle. This attribute is specific to toggle
|
|
enabled channels and allows to toggle between out_voltageY_raw0
|
|
and out_voltageY_raw1 through software. Writing 0 will select
|
|
out_voltageY_raw0 while 1 selects out_voltageY_raw1.
|