12168 lines
377 KiB
C
12168 lines
377 KiB
C
// SPDX-License-Identifier: GPL-2.0-or-later
|
|
/*
|
|
Copyright (C) 2010 Willow Garage <http://www.willowgarage.com>
|
|
Copyright (C) 2010 Ivo van Doorn <IvDoorn@gmail.com>
|
|
Copyright (C) 2009 Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
|
|
Copyright (C) 2009 Gertjan van Wingerde <gwingerde@gmail.com>
|
|
|
|
Based on the original rt2800pci.c and rt2800usb.c.
|
|
Copyright (C) 2009 Alban Browaeys <prahal@yahoo.com>
|
|
Copyright (C) 2009 Felix Fietkau <nbd@openwrt.org>
|
|
Copyright (C) 2009 Luis Correia <luis.f.correia@gmail.com>
|
|
Copyright (C) 2009 Mattias Nissler <mattias.nissler@gmx.de>
|
|
Copyright (C) 2009 Mark Asselstine <asselsm@gmail.com>
|
|
Copyright (C) 2009 Xose Vazquez Perez <xose.vazquez@gmail.com>
|
|
<http://rt2x00.serialmonkey.com>
|
|
|
|
*/
|
|
|
|
/*
|
|
Module: rt2800lib
|
|
Abstract: rt2800 generic device routines.
|
|
*/
|
|
|
|
#include <linux/crc-ccitt.h>
|
|
#include <linux/kernel.h>
|
|
#include <linux/module.h>
|
|
#include <linux/slab.h>
|
|
|
|
#include "rt2x00.h"
|
|
#include "rt2800lib.h"
|
|
#include "rt2800.h"
|
|
|
|
static bool modparam_watchdog;
|
|
module_param_named(watchdog, modparam_watchdog, bool, S_IRUGO);
|
|
MODULE_PARM_DESC(watchdog, "Enable watchdog to detect tx/rx hangs and reset hardware if detected");
|
|
|
|
/*
|
|
* Register access.
|
|
* All access to the CSR registers will go through the methods
|
|
* rt2800_register_read and rt2800_register_write.
|
|
* BBP and RF register require indirect register access,
|
|
* and use the CSR registers BBPCSR and RFCSR to achieve this.
|
|
* These indirect registers work with busy bits,
|
|
* and we will try maximal REGISTER_BUSY_COUNT times to access
|
|
* the register while taking a REGISTER_BUSY_DELAY us delay
|
|
* between each attampt. When the busy bit is still set at that time,
|
|
* the access attempt is considered to have failed,
|
|
* and we will print an error.
|
|
* The _lock versions must be used if you already hold the csr_mutex
|
|
*/
|
|
#define WAIT_FOR_BBP(__dev, __reg) \
|
|
rt2800_regbusy_read((__dev), BBP_CSR_CFG, BBP_CSR_CFG_BUSY, (__reg))
|
|
#define WAIT_FOR_RFCSR(__dev, __reg) \
|
|
rt2800_regbusy_read((__dev), RF_CSR_CFG, RF_CSR_CFG_BUSY, (__reg))
|
|
#define WAIT_FOR_RFCSR_MT7620(__dev, __reg) \
|
|
rt2800_regbusy_read((__dev), RF_CSR_CFG, RF_CSR_CFG_BUSY_MT7620, \
|
|
(__reg))
|
|
#define WAIT_FOR_RF(__dev, __reg) \
|
|
rt2800_regbusy_read((__dev), RF_CSR_CFG0, RF_CSR_CFG0_BUSY, (__reg))
|
|
#define WAIT_FOR_MCU(__dev, __reg) \
|
|
rt2800_regbusy_read((__dev), H2M_MAILBOX_CSR, \
|
|
H2M_MAILBOX_CSR_OWNER, (__reg))
|
|
|
|
static inline bool rt2800_is_305x_soc(struct rt2x00_dev *rt2x00dev)
|
|
{
|
|
/* check for rt2872 on SoC */
|
|
if (!rt2x00_is_soc(rt2x00dev) ||
|
|
!rt2x00_rt(rt2x00dev, RT2872))
|
|
return false;
|
|
|
|
/* we know for sure that these rf chipsets are used on rt305x boards */
|
|
if (rt2x00_rf(rt2x00dev, RF3020) ||
|
|
rt2x00_rf(rt2x00dev, RF3021) ||
|
|
rt2x00_rf(rt2x00dev, RF3022))
|
|
return true;
|
|
|
|
rt2x00_warn(rt2x00dev, "Unknown RF chipset on rt305x\n");
|
|
return false;
|
|
}
|
|
|
|
static void rt2800_bbp_write(struct rt2x00_dev *rt2x00dev,
|
|
const unsigned int word, const u8 value)
|
|
{
|
|
u32 reg;
|
|
|
|
mutex_lock(&rt2x00dev->csr_mutex);
|
|
|
|
/*
|
|
* Wait until the BBP becomes available, afterwards we
|
|
* can safely write the new data into the register.
|
|
*/
|
|
if (WAIT_FOR_BBP(rt2x00dev, ®)) {
|
|
reg = 0;
|
|
rt2x00_set_field32(®, BBP_CSR_CFG_VALUE, value);
|
|
rt2x00_set_field32(®, BBP_CSR_CFG_REGNUM, word);
|
|
rt2x00_set_field32(®, BBP_CSR_CFG_BUSY, 1);
|
|
rt2x00_set_field32(®, BBP_CSR_CFG_READ_CONTROL, 0);
|
|
rt2x00_set_field32(®, BBP_CSR_CFG_BBP_RW_MODE, 1);
|
|
|
|
rt2800_register_write_lock(rt2x00dev, BBP_CSR_CFG, reg);
|
|
}
|
|
|
|
mutex_unlock(&rt2x00dev->csr_mutex);
|
|
}
|
|
|
|
static u8 rt2800_bbp_read(struct rt2x00_dev *rt2x00dev, const unsigned int word)
|
|
{
|
|
u32 reg;
|
|
u8 value;
|
|
|
|
mutex_lock(&rt2x00dev->csr_mutex);
|
|
|
|
/*
|
|
* Wait until the BBP becomes available, afterwards we
|
|
* can safely write the read request into the register.
|
|
* After the data has been written, we wait until hardware
|
|
* returns the correct value, if at any time the register
|
|
* doesn't become available in time, reg will be 0xffffffff
|
|
* which means we return 0xff to the caller.
|
|
*/
|
|
if (WAIT_FOR_BBP(rt2x00dev, ®)) {
|
|
reg = 0;
|
|
rt2x00_set_field32(®, BBP_CSR_CFG_REGNUM, word);
|
|
rt2x00_set_field32(®, BBP_CSR_CFG_BUSY, 1);
|
|
rt2x00_set_field32(®, BBP_CSR_CFG_READ_CONTROL, 1);
|
|
rt2x00_set_field32(®, BBP_CSR_CFG_BBP_RW_MODE, 1);
|
|
|
|
rt2800_register_write_lock(rt2x00dev, BBP_CSR_CFG, reg);
|
|
|
|
WAIT_FOR_BBP(rt2x00dev, ®);
|
|
}
|
|
|
|
value = rt2x00_get_field32(reg, BBP_CSR_CFG_VALUE);
|
|
|
|
mutex_unlock(&rt2x00dev->csr_mutex);
|
|
|
|
return value;
|
|
}
|
|
|
|
static void rt2800_rfcsr_write(struct rt2x00_dev *rt2x00dev,
|
|
const unsigned int word, const u8 value)
|
|
{
|
|
u32 reg;
|
|
|
|
mutex_lock(&rt2x00dev->csr_mutex);
|
|
|
|
/*
|
|
* Wait until the RFCSR becomes available, afterwards we
|
|
* can safely write the new data into the register.
|
|
*/
|
|
switch (rt2x00dev->chip.rt) {
|
|
case RT6352:
|
|
if (WAIT_FOR_RFCSR_MT7620(rt2x00dev, ®)) {
|
|
reg = 0;
|
|
rt2x00_set_field32(®, RF_CSR_CFG_DATA_MT7620, value);
|
|
rt2x00_set_field32(®, RF_CSR_CFG_REGNUM_MT7620,
|
|
word);
|
|
rt2x00_set_field32(®, RF_CSR_CFG_WRITE_MT7620, 1);
|
|
rt2x00_set_field32(®, RF_CSR_CFG_BUSY_MT7620, 1);
|
|
|
|
rt2800_register_write_lock(rt2x00dev, RF_CSR_CFG, reg);
|
|
}
|
|
break;
|
|
|
|
default:
|
|
if (WAIT_FOR_RFCSR(rt2x00dev, ®)) {
|
|
reg = 0;
|
|
rt2x00_set_field32(®, RF_CSR_CFG_DATA, value);
|
|
rt2x00_set_field32(®, RF_CSR_CFG_REGNUM, word);
|
|
rt2x00_set_field32(®, RF_CSR_CFG_WRITE, 1);
|
|
rt2x00_set_field32(®, RF_CSR_CFG_BUSY, 1);
|
|
|
|
rt2800_register_write_lock(rt2x00dev, RF_CSR_CFG, reg);
|
|
}
|
|
break;
|
|
}
|
|
|
|
mutex_unlock(&rt2x00dev->csr_mutex);
|
|
}
|
|
|
|
static void rt2800_rfcsr_write_bank(struct rt2x00_dev *rt2x00dev, const u8 bank,
|
|
const unsigned int reg, const u8 value)
|
|
{
|
|
rt2800_rfcsr_write(rt2x00dev, (reg | (bank << 6)), value);
|
|
}
|
|
|
|
static void rt2800_rfcsr_write_chanreg(struct rt2x00_dev *rt2x00dev,
|
|
const unsigned int reg, const u8 value)
|
|
{
|
|
rt2800_rfcsr_write_bank(rt2x00dev, 4, reg, value);
|
|
rt2800_rfcsr_write_bank(rt2x00dev, 6, reg, value);
|
|
}
|
|
|
|
static void rt2800_rfcsr_write_dccal(struct rt2x00_dev *rt2x00dev,
|
|
const unsigned int reg, const u8 value)
|
|
{
|
|
rt2800_rfcsr_write_bank(rt2x00dev, 5, reg, value);
|
|
rt2800_rfcsr_write_bank(rt2x00dev, 7, reg, value);
|
|
}
|
|
|
|
static void rt2800_bbp_dcoc_write(struct rt2x00_dev *rt2x00dev,
|
|
const u8 reg, const u8 value)
|
|
{
|
|
rt2800_bbp_write(rt2x00dev, 158, reg);
|
|
rt2800_bbp_write(rt2x00dev, 159, value);
|
|
}
|
|
|
|
static u8 rt2800_bbp_dcoc_read(struct rt2x00_dev *rt2x00dev, const u8 reg)
|
|
{
|
|
rt2800_bbp_write(rt2x00dev, 158, reg);
|
|
return rt2800_bbp_read(rt2x00dev, 159);
|
|
}
|
|
|
|
static void rt2800_bbp_glrt_write(struct rt2x00_dev *rt2x00dev,
|
|
const u8 reg, const u8 value)
|
|
{
|
|
rt2800_bbp_write(rt2x00dev, 195, reg);
|
|
rt2800_bbp_write(rt2x00dev, 196, value);
|
|
}
|
|
|
|
static u8 rt2800_rfcsr_read(struct rt2x00_dev *rt2x00dev,
|
|
const unsigned int word)
|
|
{
|
|
u32 reg;
|
|
u8 value;
|
|
|
|
mutex_lock(&rt2x00dev->csr_mutex);
|
|
|
|
/*
|
|
* Wait until the RFCSR becomes available, afterwards we
|
|
* can safely write the read request into the register.
|
|
* After the data has been written, we wait until hardware
|
|
* returns the correct value, if at any time the register
|
|
* doesn't become available in time, reg will be 0xffffffff
|
|
* which means we return 0xff to the caller.
|
|
*/
|
|
switch (rt2x00dev->chip.rt) {
|
|
case RT6352:
|
|
if (WAIT_FOR_RFCSR_MT7620(rt2x00dev, ®)) {
|
|
reg = 0;
|
|
rt2x00_set_field32(®, RF_CSR_CFG_REGNUM_MT7620,
|
|
word);
|
|
rt2x00_set_field32(®, RF_CSR_CFG_WRITE_MT7620, 0);
|
|
rt2x00_set_field32(®, RF_CSR_CFG_BUSY_MT7620, 1);
|
|
|
|
rt2800_register_write_lock(rt2x00dev, RF_CSR_CFG, reg);
|
|
|
|
WAIT_FOR_RFCSR_MT7620(rt2x00dev, ®);
|
|
}
|
|
|
|
value = rt2x00_get_field32(reg, RF_CSR_CFG_DATA_MT7620);
|
|
break;
|
|
|
|
default:
|
|
if (WAIT_FOR_RFCSR(rt2x00dev, ®)) {
|
|
reg = 0;
|
|
rt2x00_set_field32(®, RF_CSR_CFG_REGNUM, word);
|
|
rt2x00_set_field32(®, RF_CSR_CFG_WRITE, 0);
|
|
rt2x00_set_field32(®, RF_CSR_CFG_BUSY, 1);
|
|
|
|
rt2800_register_write_lock(rt2x00dev, RF_CSR_CFG, reg);
|
|
|
|
WAIT_FOR_RFCSR(rt2x00dev, ®);
|
|
}
|
|
|
|
value = rt2x00_get_field32(reg, RF_CSR_CFG_DATA);
|
|
break;
|
|
}
|
|
|
|
mutex_unlock(&rt2x00dev->csr_mutex);
|
|
|
|
return value;
|
|
}
|
|
|
|
static u8 rt2800_rfcsr_read_bank(struct rt2x00_dev *rt2x00dev, const u8 bank,
|
|
const unsigned int reg)
|
|
{
|
|
return rt2800_rfcsr_read(rt2x00dev, (reg | (bank << 6)));
|
|
}
|
|
|
|
static void rt2800_rf_write(struct rt2x00_dev *rt2x00dev,
|
|
const unsigned int word, const u32 value)
|
|
{
|
|
u32 reg;
|
|
|
|
mutex_lock(&rt2x00dev->csr_mutex);
|
|
|
|
/*
|
|
* Wait until the RF becomes available, afterwards we
|
|
* can safely write the new data into the register.
|
|
*/
|
|
if (WAIT_FOR_RF(rt2x00dev, ®)) {
|
|
reg = 0;
|
|
rt2x00_set_field32(®, RF_CSR_CFG0_REG_VALUE_BW, value);
|
|
rt2x00_set_field32(®, RF_CSR_CFG0_STANDBYMODE, 0);
|
|
rt2x00_set_field32(®, RF_CSR_CFG0_SEL, 0);
|
|
rt2x00_set_field32(®, RF_CSR_CFG0_BUSY, 1);
|
|
|
|
rt2800_register_write_lock(rt2x00dev, RF_CSR_CFG0, reg);
|
|
rt2x00_rf_write(rt2x00dev, word, value);
|
|
}
|
|
|
|
mutex_unlock(&rt2x00dev->csr_mutex);
|
|
}
|
|
|
|
static const unsigned int rt2800_eeprom_map[EEPROM_WORD_COUNT] = {
|
|
[EEPROM_CHIP_ID] = 0x0000,
|
|
[EEPROM_VERSION] = 0x0001,
|
|
[EEPROM_MAC_ADDR_0] = 0x0002,
|
|
[EEPROM_MAC_ADDR_1] = 0x0003,
|
|
[EEPROM_MAC_ADDR_2] = 0x0004,
|
|
[EEPROM_NIC_CONF0] = 0x001a,
|
|
[EEPROM_NIC_CONF1] = 0x001b,
|
|
[EEPROM_FREQ] = 0x001d,
|
|
[EEPROM_LED_AG_CONF] = 0x001e,
|
|
[EEPROM_LED_ACT_CONF] = 0x001f,
|
|
[EEPROM_LED_POLARITY] = 0x0020,
|
|
[EEPROM_NIC_CONF2] = 0x0021,
|
|
[EEPROM_LNA] = 0x0022,
|
|
[EEPROM_RSSI_BG] = 0x0023,
|
|
[EEPROM_RSSI_BG2] = 0x0024,
|
|
[EEPROM_TXMIXER_GAIN_BG] = 0x0024, /* overlaps with RSSI_BG2 */
|
|
[EEPROM_RSSI_A] = 0x0025,
|
|
[EEPROM_RSSI_A2] = 0x0026,
|
|
[EEPROM_TXMIXER_GAIN_A] = 0x0026, /* overlaps with RSSI_A2 */
|
|
[EEPROM_EIRP_MAX_TX_POWER] = 0x0027,
|
|
[EEPROM_TXPOWER_DELTA] = 0x0028,
|
|
[EEPROM_TXPOWER_BG1] = 0x0029,
|
|
[EEPROM_TXPOWER_BG2] = 0x0030,
|
|
[EEPROM_TSSI_BOUND_BG1] = 0x0037,
|
|
[EEPROM_TSSI_BOUND_BG2] = 0x0038,
|
|
[EEPROM_TSSI_BOUND_BG3] = 0x0039,
|
|
[EEPROM_TSSI_BOUND_BG4] = 0x003a,
|
|
[EEPROM_TSSI_BOUND_BG5] = 0x003b,
|
|
[EEPROM_TXPOWER_A1] = 0x003c,
|
|
[EEPROM_TXPOWER_A2] = 0x0053,
|
|
[EEPROM_TXPOWER_INIT] = 0x0068,
|
|
[EEPROM_TSSI_BOUND_A1] = 0x006a,
|
|
[EEPROM_TSSI_BOUND_A2] = 0x006b,
|
|
[EEPROM_TSSI_BOUND_A3] = 0x006c,
|
|
[EEPROM_TSSI_BOUND_A4] = 0x006d,
|
|
[EEPROM_TSSI_BOUND_A5] = 0x006e,
|
|
[EEPROM_TXPOWER_BYRATE] = 0x006f,
|
|
[EEPROM_BBP_START] = 0x0078,
|
|
};
|
|
|
|
static const unsigned int rt2800_eeprom_map_ext[EEPROM_WORD_COUNT] = {
|
|
[EEPROM_CHIP_ID] = 0x0000,
|
|
[EEPROM_VERSION] = 0x0001,
|
|
[EEPROM_MAC_ADDR_0] = 0x0002,
|
|
[EEPROM_MAC_ADDR_1] = 0x0003,
|
|
[EEPROM_MAC_ADDR_2] = 0x0004,
|
|
[EEPROM_NIC_CONF0] = 0x001a,
|
|
[EEPROM_NIC_CONF1] = 0x001b,
|
|
[EEPROM_NIC_CONF2] = 0x001c,
|
|
[EEPROM_EIRP_MAX_TX_POWER] = 0x0020,
|
|
[EEPROM_FREQ] = 0x0022,
|
|
[EEPROM_LED_AG_CONF] = 0x0023,
|
|
[EEPROM_LED_ACT_CONF] = 0x0024,
|
|
[EEPROM_LED_POLARITY] = 0x0025,
|
|
[EEPROM_LNA] = 0x0026,
|
|
[EEPROM_EXT_LNA2] = 0x0027,
|
|
[EEPROM_RSSI_BG] = 0x0028,
|
|
[EEPROM_RSSI_BG2] = 0x0029,
|
|
[EEPROM_RSSI_A] = 0x002a,
|
|
[EEPROM_RSSI_A2] = 0x002b,
|
|
[EEPROM_TXPOWER_BG1] = 0x0030,
|
|
[EEPROM_TXPOWER_BG2] = 0x0037,
|
|
[EEPROM_EXT_TXPOWER_BG3] = 0x003e,
|
|
[EEPROM_TSSI_BOUND_BG1] = 0x0045,
|
|
[EEPROM_TSSI_BOUND_BG2] = 0x0046,
|
|
[EEPROM_TSSI_BOUND_BG3] = 0x0047,
|
|
[EEPROM_TSSI_BOUND_BG4] = 0x0048,
|
|
[EEPROM_TSSI_BOUND_BG5] = 0x0049,
|
|
[EEPROM_TXPOWER_A1] = 0x004b,
|
|
[EEPROM_TXPOWER_A2] = 0x0065,
|
|
[EEPROM_EXT_TXPOWER_A3] = 0x007f,
|
|
[EEPROM_TSSI_BOUND_A1] = 0x009a,
|
|
[EEPROM_TSSI_BOUND_A2] = 0x009b,
|
|
[EEPROM_TSSI_BOUND_A3] = 0x009c,
|
|
[EEPROM_TSSI_BOUND_A4] = 0x009d,
|
|
[EEPROM_TSSI_BOUND_A5] = 0x009e,
|
|
[EEPROM_TXPOWER_BYRATE] = 0x00a0,
|
|
};
|
|
|
|
static unsigned int rt2800_eeprom_word_index(struct rt2x00_dev *rt2x00dev,
|
|
const enum rt2800_eeprom_word word)
|
|
{
|
|
const unsigned int *map;
|
|
unsigned int index;
|
|
|
|
if (WARN_ONCE(word >= EEPROM_WORD_COUNT,
|
|
"%s: invalid EEPROM word %d\n",
|
|
wiphy_name(rt2x00dev->hw->wiphy), word))
|
|
return 0;
|
|
|
|
if (rt2x00_rt(rt2x00dev, RT3593) ||
|
|
rt2x00_rt(rt2x00dev, RT3883))
|
|
map = rt2800_eeprom_map_ext;
|
|
else
|
|
map = rt2800_eeprom_map;
|
|
|
|
index = map[word];
|
|
|
|
/* Index 0 is valid only for EEPROM_CHIP_ID.
|
|
* Otherwise it means that the offset of the
|
|
* given word is not initialized in the map,
|
|
* or that the field is not usable on the
|
|
* actual chipset.
|
|
*/
|
|
WARN_ONCE(word != EEPROM_CHIP_ID && index == 0,
|
|
"%s: invalid access of EEPROM word %d\n",
|
|
wiphy_name(rt2x00dev->hw->wiphy), word);
|
|
|
|
return index;
|
|
}
|
|
|
|
static void *rt2800_eeprom_addr(struct rt2x00_dev *rt2x00dev,
|
|
const enum rt2800_eeprom_word word)
|
|
{
|
|
unsigned int index;
|
|
|
|
index = rt2800_eeprom_word_index(rt2x00dev, word);
|
|
return rt2x00_eeprom_addr(rt2x00dev, index);
|
|
}
|
|
|
|
static u16 rt2800_eeprom_read(struct rt2x00_dev *rt2x00dev,
|
|
const enum rt2800_eeprom_word word)
|
|
{
|
|
unsigned int index;
|
|
|
|
index = rt2800_eeprom_word_index(rt2x00dev, word);
|
|
return rt2x00_eeprom_read(rt2x00dev, index);
|
|
}
|
|
|
|
static void rt2800_eeprom_write(struct rt2x00_dev *rt2x00dev,
|
|
const enum rt2800_eeprom_word word, u16 data)
|
|
{
|
|
unsigned int index;
|
|
|
|
index = rt2800_eeprom_word_index(rt2x00dev, word);
|
|
rt2x00_eeprom_write(rt2x00dev, index, data);
|
|
}
|
|
|
|
static u16 rt2800_eeprom_read_from_array(struct rt2x00_dev *rt2x00dev,
|
|
const enum rt2800_eeprom_word array,
|
|
unsigned int offset)
|
|
{
|
|
unsigned int index;
|
|
|
|
index = rt2800_eeprom_word_index(rt2x00dev, array);
|
|
return rt2x00_eeprom_read(rt2x00dev, index + offset);
|
|
}
|
|
|
|
static int rt2800_enable_wlan_rt3290(struct rt2x00_dev *rt2x00dev)
|
|
{
|
|
u32 reg;
|
|
int i, count;
|
|
|
|
reg = rt2800_register_read(rt2x00dev, WLAN_FUN_CTRL);
|
|
rt2x00_set_field32(®, WLAN_GPIO_OUT_OE_BIT_ALL, 0xff);
|
|
rt2x00_set_field32(®, FRC_WL_ANT_SET, 1);
|
|
rt2x00_set_field32(®, WLAN_CLK_EN, 0);
|
|
rt2x00_set_field32(®, WLAN_EN, 1);
|
|
rt2800_register_write(rt2x00dev, WLAN_FUN_CTRL, reg);
|
|
|
|
udelay(REGISTER_BUSY_DELAY);
|
|
|
|
count = 0;
|
|
do {
|
|
/*
|
|
* Check PLL_LD & XTAL_RDY.
|
|
*/
|
|
for (i = 0; i < REGISTER_BUSY_COUNT; i++) {
|
|
reg = rt2800_register_read(rt2x00dev, CMB_CTRL);
|
|
if (rt2x00_get_field32(reg, PLL_LD) &&
|
|
rt2x00_get_field32(reg, XTAL_RDY))
|
|
break;
|
|
udelay(REGISTER_BUSY_DELAY);
|
|
}
|
|
|
|
if (i >= REGISTER_BUSY_COUNT) {
|
|
|
|
if (count >= 10)
|
|
return -EIO;
|
|
|
|
rt2800_register_write(rt2x00dev, 0x58, 0x018);
|
|
udelay(REGISTER_BUSY_DELAY);
|
|
rt2800_register_write(rt2x00dev, 0x58, 0x418);
|
|
udelay(REGISTER_BUSY_DELAY);
|
|
rt2800_register_write(rt2x00dev, 0x58, 0x618);
|
|
udelay(REGISTER_BUSY_DELAY);
|
|
count++;
|
|
} else {
|
|
count = 0;
|
|
}
|
|
|
|
reg = rt2800_register_read(rt2x00dev, WLAN_FUN_CTRL);
|
|
rt2x00_set_field32(®, PCIE_APP0_CLK_REQ, 0);
|
|
rt2x00_set_field32(®, WLAN_CLK_EN, 1);
|
|
rt2x00_set_field32(®, WLAN_RESET, 1);
|
|
rt2800_register_write(rt2x00dev, WLAN_FUN_CTRL, reg);
|
|
udelay(10);
|
|
rt2x00_set_field32(®, WLAN_RESET, 0);
|
|
rt2800_register_write(rt2x00dev, WLAN_FUN_CTRL, reg);
|
|
udelay(10);
|
|
rt2800_register_write(rt2x00dev, INT_SOURCE_CSR, 0x7fffffff);
|
|
} while (count != 0);
|
|
|
|
return 0;
|
|
}
|
|
|
|
void rt2800_mcu_request(struct rt2x00_dev *rt2x00dev,
|
|
const u8 command, const u8 token,
|
|
const u8 arg0, const u8 arg1)
|
|
{
|
|
u32 reg;
|
|
|
|
/*
|
|
* SOC devices don't support MCU requests.
|
|
*/
|
|
if (rt2x00_is_soc(rt2x00dev))
|
|
return;
|
|
|
|
mutex_lock(&rt2x00dev->csr_mutex);
|
|
|
|
/*
|
|
* Wait until the MCU becomes available, afterwards we
|
|
* can safely write the new data into the register.
|
|
*/
|
|
if (WAIT_FOR_MCU(rt2x00dev, ®)) {
|
|
rt2x00_set_field32(®, H2M_MAILBOX_CSR_OWNER, 1);
|
|
rt2x00_set_field32(®, H2M_MAILBOX_CSR_CMD_TOKEN, token);
|
|
rt2x00_set_field32(®, H2M_MAILBOX_CSR_ARG0, arg0);
|
|
rt2x00_set_field32(®, H2M_MAILBOX_CSR_ARG1, arg1);
|
|
rt2800_register_write_lock(rt2x00dev, H2M_MAILBOX_CSR, reg);
|
|
|
|
reg = 0;
|
|
rt2x00_set_field32(®, HOST_CMD_CSR_HOST_COMMAND, command);
|
|
rt2800_register_write_lock(rt2x00dev, HOST_CMD_CSR, reg);
|
|
}
|
|
|
|
mutex_unlock(&rt2x00dev->csr_mutex);
|
|
}
|
|
EXPORT_SYMBOL_GPL(rt2800_mcu_request);
|
|
|
|
int rt2800_wait_csr_ready(struct rt2x00_dev *rt2x00dev)
|
|
{
|
|
unsigned int i = 0;
|
|
u32 reg;
|
|
|
|
for (i = 0; i < REGISTER_BUSY_COUNT; i++) {
|
|
reg = rt2800_register_read(rt2x00dev, MAC_CSR0);
|
|
if (reg && reg != ~0)
|
|
return 0;
|
|
msleep(1);
|
|
}
|
|
|
|
rt2x00_err(rt2x00dev, "Unstable hardware\n");
|
|
return -EBUSY;
|
|
}
|
|
EXPORT_SYMBOL_GPL(rt2800_wait_csr_ready);
|
|
|
|
int rt2800_wait_wpdma_ready(struct rt2x00_dev *rt2x00dev)
|
|
{
|
|
unsigned int i;
|
|
u32 reg;
|
|
|
|
/*
|
|
* Some devices are really slow to respond here. Wait a whole second
|
|
* before timing out.
|
|
*/
|
|
for (i = 0; i < REGISTER_BUSY_COUNT; i++) {
|
|
reg = rt2800_register_read(rt2x00dev, WPDMA_GLO_CFG);
|
|
if (!rt2x00_get_field32(reg, WPDMA_GLO_CFG_TX_DMA_BUSY) &&
|
|
!rt2x00_get_field32(reg, WPDMA_GLO_CFG_RX_DMA_BUSY))
|
|
return 0;
|
|
|
|
msleep(10);
|
|
}
|
|
|
|
rt2x00_err(rt2x00dev, "WPDMA TX/RX busy [0x%08x]\n", reg);
|
|
return -EACCES;
|
|
}
|
|
EXPORT_SYMBOL_GPL(rt2800_wait_wpdma_ready);
|
|
|
|
void rt2800_disable_wpdma(struct rt2x00_dev *rt2x00dev)
|
|
{
|
|
u32 reg;
|
|
|
|
reg = rt2800_register_read(rt2x00dev, WPDMA_GLO_CFG);
|
|
rt2x00_set_field32(®, WPDMA_GLO_CFG_ENABLE_TX_DMA, 0);
|
|
rt2x00_set_field32(®, WPDMA_GLO_CFG_TX_DMA_BUSY, 0);
|
|
rt2x00_set_field32(®, WPDMA_GLO_CFG_ENABLE_RX_DMA, 0);
|
|
rt2x00_set_field32(®, WPDMA_GLO_CFG_RX_DMA_BUSY, 0);
|
|
rt2x00_set_field32(®, WPDMA_GLO_CFG_TX_WRITEBACK_DONE, 1);
|
|
rt2800_register_write(rt2x00dev, WPDMA_GLO_CFG, reg);
|
|
}
|
|
EXPORT_SYMBOL_GPL(rt2800_disable_wpdma);
|
|
|
|
void rt2800_get_txwi_rxwi_size(struct rt2x00_dev *rt2x00dev,
|
|
unsigned short *txwi_size,
|
|
unsigned short *rxwi_size)
|
|
{
|
|
switch (rt2x00dev->chip.rt) {
|
|
case RT3593:
|
|
case RT3883:
|
|
*txwi_size = TXWI_DESC_SIZE_4WORDS;
|
|
*rxwi_size = RXWI_DESC_SIZE_5WORDS;
|
|
break;
|
|
|
|
case RT5592:
|
|
case RT6352:
|
|
*txwi_size = TXWI_DESC_SIZE_5WORDS;
|
|
*rxwi_size = RXWI_DESC_SIZE_6WORDS;
|
|
break;
|
|
|
|
default:
|
|
*txwi_size = TXWI_DESC_SIZE_4WORDS;
|
|
*rxwi_size = RXWI_DESC_SIZE_4WORDS;
|
|
break;
|
|
}
|
|
}
|
|
EXPORT_SYMBOL_GPL(rt2800_get_txwi_rxwi_size);
|
|
|
|
static bool rt2800_check_firmware_crc(const u8 *data, const size_t len)
|
|
{
|
|
u16 fw_crc;
|
|
u16 crc;
|
|
|
|
/*
|
|
* The last 2 bytes in the firmware array are the crc checksum itself,
|
|
* this means that we should never pass those 2 bytes to the crc
|
|
* algorithm.
|
|
*/
|
|
fw_crc = (data[len - 2] << 8 | data[len - 1]);
|
|
|
|
/*
|
|
* Use the crc ccitt algorithm.
|
|
* This will return the same value as the legacy driver which
|
|
* used bit ordering reversion on the both the firmware bytes
|
|
* before input input as well as on the final output.
|
|
* Obviously using crc ccitt directly is much more efficient.
|
|
*/
|
|
crc = crc_ccitt(~0, data, len - 2);
|
|
|
|
/*
|
|
* There is a small difference between the crc-itu-t + bitrev and
|
|
* the crc-ccitt crc calculation. In the latter method the 2 bytes
|
|
* will be swapped, use swab16 to convert the crc to the correct
|
|
* value.
|
|
*/
|
|
crc = swab16(crc);
|
|
|
|
return fw_crc == crc;
|
|
}
|
|
|
|
int rt2800_check_firmware(struct rt2x00_dev *rt2x00dev,
|
|
const u8 *data, const size_t len)
|
|
{
|
|
size_t offset = 0;
|
|
size_t fw_len;
|
|
bool multiple;
|
|
|
|
/*
|
|
* PCI(e) & SOC devices require firmware with a length
|
|
* of 8kb. USB devices require firmware files with a length
|
|
* of 4kb. Certain USB chipsets however require different firmware,
|
|
* which Ralink only provides attached to the original firmware
|
|
* file. Thus for USB devices, firmware files have a length
|
|
* which is a multiple of 4kb. The firmware for rt3290 chip also
|
|
* have a length which is a multiple of 4kb.
|
|
*/
|
|
if (rt2x00_is_usb(rt2x00dev) || rt2x00_rt(rt2x00dev, RT3290))
|
|
fw_len = 4096;
|
|
else
|
|
fw_len = 8192;
|
|
|
|
multiple = true;
|
|
/*
|
|
* Validate the firmware length
|
|
*/
|
|
if (len != fw_len && (!multiple || (len % fw_len) != 0))
|
|
return FW_BAD_LENGTH;
|
|
|
|
/*
|
|
* Check if the chipset requires one of the upper parts
|
|
* of the firmware.
|
|
*/
|
|
if (rt2x00_is_usb(rt2x00dev) &&
|
|
!rt2x00_rt(rt2x00dev, RT2860) &&
|
|
!rt2x00_rt(rt2x00dev, RT2872) &&
|
|
!rt2x00_rt(rt2x00dev, RT3070) &&
|
|
((len / fw_len) == 1))
|
|
return FW_BAD_VERSION;
|
|
|
|
/*
|
|
* 8kb firmware files must be checked as if it were
|
|
* 2 separate firmware files.
|
|
*/
|
|
while (offset < len) {
|
|
if (!rt2800_check_firmware_crc(data + offset, fw_len))
|
|
return FW_BAD_CRC;
|
|
|
|
offset += fw_len;
|
|
}
|
|
|
|
return FW_OK;
|
|
}
|
|
EXPORT_SYMBOL_GPL(rt2800_check_firmware);
|
|
|
|
int rt2800_load_firmware(struct rt2x00_dev *rt2x00dev,
|
|
const u8 *data, const size_t len)
|
|
{
|
|
unsigned int i;
|
|
u32 reg;
|
|
int retval;
|
|
|
|
if (rt2x00_rt(rt2x00dev, RT3290)) {
|
|
retval = rt2800_enable_wlan_rt3290(rt2x00dev);
|
|
if (retval)
|
|
return -EBUSY;
|
|
}
|
|
|
|
/*
|
|
* If driver doesn't wake up firmware here,
|
|
* rt2800_load_firmware will hang forever when interface is up again.
|
|
*/
|
|
rt2800_register_write(rt2x00dev, AUTOWAKEUP_CFG, 0x00000000);
|
|
|
|
/*
|
|
* Wait for stable hardware.
|
|
*/
|
|
if (rt2800_wait_csr_ready(rt2x00dev))
|
|
return -EBUSY;
|
|
|
|
if (rt2x00_is_pci(rt2x00dev)) {
|
|
if (rt2x00_rt(rt2x00dev, RT3290) ||
|
|
rt2x00_rt(rt2x00dev, RT3572) ||
|
|
rt2x00_rt(rt2x00dev, RT5390) ||
|
|
rt2x00_rt(rt2x00dev, RT5392)) {
|
|
reg = rt2800_register_read(rt2x00dev, AUX_CTRL);
|
|
rt2x00_set_field32(®, AUX_CTRL_FORCE_PCIE_CLK, 1);
|
|
rt2x00_set_field32(®, AUX_CTRL_WAKE_PCIE_EN, 1);
|
|
rt2800_register_write(rt2x00dev, AUX_CTRL, reg);
|
|
}
|
|
rt2800_register_write(rt2x00dev, PWR_PIN_CFG, 0x00000002);
|
|
}
|
|
|
|
rt2800_disable_wpdma(rt2x00dev);
|
|
|
|
/*
|
|
* Write firmware to the device.
|
|
*/
|
|
rt2800_drv_write_firmware(rt2x00dev, data, len);
|
|
|
|
/*
|
|
* Wait for device to stabilize.
|
|
*/
|
|
for (i = 0; i < REGISTER_BUSY_COUNT; i++) {
|
|
reg = rt2800_register_read(rt2x00dev, PBF_SYS_CTRL);
|
|
if (rt2x00_get_field32(reg, PBF_SYS_CTRL_READY))
|
|
break;
|
|
msleep(1);
|
|
}
|
|
|
|
if (i == REGISTER_BUSY_COUNT) {
|
|
rt2x00_err(rt2x00dev, "PBF system register not ready\n");
|
|
return -EBUSY;
|
|
}
|
|
|
|
/*
|
|
* Disable DMA, will be reenabled later when enabling
|
|
* the radio.
|
|
*/
|
|
rt2800_disable_wpdma(rt2x00dev);
|
|
|
|
/*
|
|
* Initialize firmware.
|
|
*/
|
|
rt2800_register_write(rt2x00dev, H2M_BBP_AGENT, 0);
|
|
rt2800_register_write(rt2x00dev, H2M_MAILBOX_CSR, 0);
|
|
if (rt2x00_is_usb(rt2x00dev)) {
|
|
rt2800_register_write(rt2x00dev, H2M_INT_SRC, 0);
|
|
rt2800_mcu_request(rt2x00dev, MCU_BOOT_SIGNAL, 0, 0, 0);
|
|
}
|
|
msleep(1);
|
|
|
|
return 0;
|
|
}
|
|
EXPORT_SYMBOL_GPL(rt2800_load_firmware);
|
|
|
|
void rt2800_write_tx_data(struct queue_entry *entry,
|
|
struct txentry_desc *txdesc)
|
|
{
|
|
__le32 *txwi = rt2800_drv_get_txwi(entry);
|
|
u32 word;
|
|
int i;
|
|
|
|
/*
|
|
* Initialize TX Info descriptor
|
|
*/
|
|
word = rt2x00_desc_read(txwi, 0);
|
|
rt2x00_set_field32(&word, TXWI_W0_FRAG,
|
|
test_bit(ENTRY_TXD_MORE_FRAG, &txdesc->flags));
|
|
rt2x00_set_field32(&word, TXWI_W0_MIMO_PS,
|
|
test_bit(ENTRY_TXD_HT_MIMO_PS, &txdesc->flags));
|
|
rt2x00_set_field32(&word, TXWI_W0_CF_ACK, 0);
|
|
rt2x00_set_field32(&word, TXWI_W0_TS,
|
|
test_bit(ENTRY_TXD_REQ_TIMESTAMP, &txdesc->flags));
|
|
rt2x00_set_field32(&word, TXWI_W0_AMPDU,
|
|
test_bit(ENTRY_TXD_HT_AMPDU, &txdesc->flags));
|
|
rt2x00_set_field32(&word, TXWI_W0_MPDU_DENSITY,
|
|
txdesc->u.ht.mpdu_density);
|
|
rt2x00_set_field32(&word, TXWI_W0_TX_OP, txdesc->u.ht.txop);
|
|
rt2x00_set_field32(&word, TXWI_W0_MCS, txdesc->u.ht.mcs);
|
|
rt2x00_set_field32(&word, TXWI_W0_BW,
|
|
test_bit(ENTRY_TXD_HT_BW_40, &txdesc->flags));
|
|
rt2x00_set_field32(&word, TXWI_W0_SHORT_GI,
|
|
test_bit(ENTRY_TXD_HT_SHORT_GI, &txdesc->flags));
|
|
rt2x00_set_field32(&word, TXWI_W0_STBC, txdesc->u.ht.stbc);
|
|
rt2x00_set_field32(&word, TXWI_W0_PHYMODE, txdesc->rate_mode);
|
|
rt2x00_desc_write(txwi, 0, word);
|
|
|
|
word = rt2x00_desc_read(txwi, 1);
|
|
rt2x00_set_field32(&word, TXWI_W1_ACK,
|
|
test_bit(ENTRY_TXD_ACK, &txdesc->flags));
|
|
rt2x00_set_field32(&word, TXWI_W1_NSEQ,
|
|
test_bit(ENTRY_TXD_GENERATE_SEQ, &txdesc->flags));
|
|
rt2x00_set_field32(&word, TXWI_W1_BW_WIN_SIZE, txdesc->u.ht.ba_size);
|
|
rt2x00_set_field32(&word, TXWI_W1_WIRELESS_CLI_ID,
|
|
test_bit(ENTRY_TXD_ENCRYPT, &txdesc->flags) ?
|
|
txdesc->key_idx : txdesc->u.ht.wcid);
|
|
rt2x00_set_field32(&word, TXWI_W1_MPDU_TOTAL_BYTE_COUNT,
|
|
txdesc->length);
|
|
rt2x00_set_field32(&word, TXWI_W1_PACKETID_QUEUE, entry->queue->qid);
|
|
rt2x00_set_field32(&word, TXWI_W1_PACKETID_ENTRY, (entry->entry_idx % 3) + 1);
|
|
rt2x00_desc_write(txwi, 1, word);
|
|
|
|
/*
|
|
* Always write 0 to IV/EIV fields (word 2 and 3), hardware will insert
|
|
* the IV from the IVEIV register when TXD_W3_WIV is set to 0.
|
|
* When TXD_W3_WIV is set to 1 it will use the IV data
|
|
* from the descriptor. The TXWI_W1_WIRELESS_CLI_ID indicates which
|
|
* crypto entry in the registers should be used to encrypt the frame.
|
|
*
|
|
* Nulify all remaining words as well, we don't know how to program them.
|
|
*/
|
|
for (i = 2; i < entry->queue->winfo_size / sizeof(__le32); i++)
|
|
_rt2x00_desc_write(txwi, i, 0);
|
|
}
|
|
EXPORT_SYMBOL_GPL(rt2800_write_tx_data);
|
|
|
|
static int rt2800_agc_to_rssi(struct rt2x00_dev *rt2x00dev, u32 rxwi_w2)
|
|
{
|
|
s8 rssi0 = rt2x00_get_field32(rxwi_w2, RXWI_W2_RSSI0);
|
|
s8 rssi1 = rt2x00_get_field32(rxwi_w2, RXWI_W2_RSSI1);
|
|
s8 rssi2 = rt2x00_get_field32(rxwi_w2, RXWI_W2_RSSI2);
|
|
u16 eeprom;
|
|
u8 offset0;
|
|
u8 offset1;
|
|
u8 offset2;
|
|
|
|
if (rt2x00dev->curr_band == NL80211_BAND_2GHZ) {
|
|
eeprom = rt2800_eeprom_read(rt2x00dev, EEPROM_RSSI_BG);
|
|
offset0 = rt2x00_get_field16(eeprom, EEPROM_RSSI_BG_OFFSET0);
|
|
offset1 = rt2x00_get_field16(eeprom, EEPROM_RSSI_BG_OFFSET1);
|
|
eeprom = rt2800_eeprom_read(rt2x00dev, EEPROM_RSSI_BG2);
|
|
offset2 = rt2x00_get_field16(eeprom, EEPROM_RSSI_BG2_OFFSET2);
|
|
} else {
|
|
eeprom = rt2800_eeprom_read(rt2x00dev, EEPROM_RSSI_A);
|
|
offset0 = rt2x00_get_field16(eeprom, EEPROM_RSSI_A_OFFSET0);
|
|
offset1 = rt2x00_get_field16(eeprom, EEPROM_RSSI_A_OFFSET1);
|
|
eeprom = rt2800_eeprom_read(rt2x00dev, EEPROM_RSSI_A2);
|
|
offset2 = rt2x00_get_field16(eeprom, EEPROM_RSSI_A2_OFFSET2);
|
|
}
|
|
|
|
/*
|
|
* Convert the value from the descriptor into the RSSI value
|
|
* If the value in the descriptor is 0, it is considered invalid
|
|
* and the default (extremely low) rssi value is assumed
|
|
*/
|
|
rssi0 = (rssi0) ? (-12 - offset0 - rt2x00dev->lna_gain - rssi0) : -128;
|
|
rssi1 = (rssi1) ? (-12 - offset1 - rt2x00dev->lna_gain - rssi1) : -128;
|
|
rssi2 = (rssi2) ? (-12 - offset2 - rt2x00dev->lna_gain - rssi2) : -128;
|
|
|
|
/*
|
|
* mac80211 only accepts a single RSSI value. Calculating the
|
|
* average doesn't deliver a fair answer either since -60:-60 would
|
|
* be considered equally good as -50:-70 while the second is the one
|
|
* which gives less energy...
|
|
*/
|
|
rssi0 = max(rssi0, rssi1);
|
|
return (int)max(rssi0, rssi2);
|
|
}
|
|
|
|
void rt2800_process_rxwi(struct queue_entry *entry,
|
|
struct rxdone_entry_desc *rxdesc)
|
|
{
|
|
__le32 *rxwi = (__le32 *) entry->skb->data;
|
|
u32 word;
|
|
|
|
word = rt2x00_desc_read(rxwi, 0);
|
|
|
|
rxdesc->cipher = rt2x00_get_field32(word, RXWI_W0_UDF);
|
|
rxdesc->size = rt2x00_get_field32(word, RXWI_W0_MPDU_TOTAL_BYTE_COUNT);
|
|
|
|
word = rt2x00_desc_read(rxwi, 1);
|
|
|
|
if (rt2x00_get_field32(word, RXWI_W1_SHORT_GI))
|
|
rxdesc->enc_flags |= RX_ENC_FLAG_SHORT_GI;
|
|
|
|
if (rt2x00_get_field32(word, RXWI_W1_BW))
|
|
rxdesc->bw = RATE_INFO_BW_40;
|
|
|
|
/*
|
|
* Detect RX rate, always use MCS as signal type.
|
|
*/
|
|
rxdesc->dev_flags |= RXDONE_SIGNAL_MCS;
|
|
rxdesc->signal = rt2x00_get_field32(word, RXWI_W1_MCS);
|
|
rxdesc->rate_mode = rt2x00_get_field32(word, RXWI_W1_PHYMODE);
|
|
|
|
/*
|
|
* Mask of 0x8 bit to remove the short preamble flag.
|
|
*/
|
|
if (rxdesc->rate_mode == RATE_MODE_CCK)
|
|
rxdesc->signal &= ~0x8;
|
|
|
|
word = rt2x00_desc_read(rxwi, 2);
|
|
|
|
/*
|
|
* Convert descriptor AGC value to RSSI value.
|
|
*/
|
|
rxdesc->rssi = rt2800_agc_to_rssi(entry->queue->rt2x00dev, word);
|
|
/*
|
|
* Remove RXWI descriptor from start of the buffer.
|
|
*/
|
|
skb_pull(entry->skb, entry->queue->winfo_size);
|
|
}
|
|
EXPORT_SYMBOL_GPL(rt2800_process_rxwi);
|
|
|
|
static void rt2800_rate_from_status(struct skb_frame_desc *skbdesc,
|
|
u32 status, enum nl80211_band band)
|
|
{
|
|
u8 flags = 0;
|
|
u8 idx = rt2x00_get_field32(status, TX_STA_FIFO_MCS);
|
|
|
|
switch (rt2x00_get_field32(status, TX_STA_FIFO_PHYMODE)) {
|
|
case RATE_MODE_HT_GREENFIELD:
|
|
flags |= IEEE80211_TX_RC_GREEN_FIELD;
|
|
fallthrough;
|
|
case RATE_MODE_HT_MIX:
|
|
flags |= IEEE80211_TX_RC_MCS;
|
|
break;
|
|
case RATE_MODE_OFDM:
|
|
if (band == NL80211_BAND_2GHZ)
|
|
idx += 4;
|
|
break;
|
|
case RATE_MODE_CCK:
|
|
if (idx >= 8)
|
|
idx -= 8;
|
|
break;
|
|
}
|
|
|
|
if (rt2x00_get_field32(status, TX_STA_FIFO_BW))
|
|
flags |= IEEE80211_TX_RC_40_MHZ_WIDTH;
|
|
|
|
if (rt2x00_get_field32(status, TX_STA_FIFO_SGI))
|
|
flags |= IEEE80211_TX_RC_SHORT_GI;
|
|
|
|
skbdesc->tx_rate_idx = idx;
|
|
skbdesc->tx_rate_flags = flags;
|
|
}
|
|
|
|
static bool rt2800_txdone_entry_check(struct queue_entry *entry, u32 reg)
|
|
{
|
|
__le32 *txwi;
|
|
u32 word;
|
|
int wcid, ack, pid;
|
|
int tx_wcid, tx_ack, tx_pid, is_agg;
|
|
|
|
/*
|
|
* This frames has returned with an IO error,
|
|
* so the status report is not intended for this
|
|
* frame.
|
|
*/
|
|
if (test_bit(ENTRY_DATA_IO_FAILED, &entry->flags))
|
|
return false;
|
|
|
|
wcid = rt2x00_get_field32(reg, TX_STA_FIFO_WCID);
|
|
ack = rt2x00_get_field32(reg, TX_STA_FIFO_TX_ACK_REQUIRED);
|
|
pid = rt2x00_get_field32(reg, TX_STA_FIFO_PID_TYPE);
|
|
is_agg = rt2x00_get_field32(reg, TX_STA_FIFO_TX_AGGRE);
|
|
|
|
/*
|
|
* Validate if this TX status report is intended for
|
|
* this entry by comparing the WCID/ACK/PID fields.
|
|
*/
|
|
txwi = rt2800_drv_get_txwi(entry);
|
|
|
|
word = rt2x00_desc_read(txwi, 1);
|
|
tx_wcid = rt2x00_get_field32(word, TXWI_W1_WIRELESS_CLI_ID);
|
|
tx_ack = rt2x00_get_field32(word, TXWI_W1_ACK);
|
|
tx_pid = rt2x00_get_field32(word, TXWI_W1_PACKETID);
|
|
|
|
if (wcid != tx_wcid || ack != tx_ack || (!is_agg && pid != tx_pid)) {
|
|
rt2x00_dbg(entry->queue->rt2x00dev,
|
|
"TX status report missed for queue %d entry %d\n",
|
|
entry->queue->qid, entry->entry_idx);
|
|
return false;
|
|
}
|
|
|
|
return true;
|
|
}
|
|
|
|
void rt2800_txdone_entry(struct queue_entry *entry, u32 status, __le32 *txwi,
|
|
bool match)
|
|
{
|
|
struct rt2x00_dev *rt2x00dev = entry->queue->rt2x00dev;
|
|
struct rt2800_drv_data *drv_data = rt2x00dev->drv_data;
|
|
struct skb_frame_desc *skbdesc = get_skb_frame_desc(entry->skb);
|
|
struct txdone_entry_desc txdesc;
|
|
u32 word;
|
|
u16 mcs, real_mcs;
|
|
int aggr, ampdu, wcid, ack_req;
|
|
|
|
/*
|
|
* Obtain the status about this packet.
|
|
*/
|
|
txdesc.flags = 0;
|
|
word = rt2x00_desc_read(txwi, 0);
|
|
|
|
mcs = rt2x00_get_field32(word, TXWI_W0_MCS);
|
|
ampdu = rt2x00_get_field32(word, TXWI_W0_AMPDU);
|
|
|
|
real_mcs = rt2x00_get_field32(status, TX_STA_FIFO_MCS);
|
|
aggr = rt2x00_get_field32(status, TX_STA_FIFO_TX_AGGRE);
|
|
wcid = rt2x00_get_field32(status, TX_STA_FIFO_WCID);
|
|
ack_req = rt2x00_get_field32(status, TX_STA_FIFO_TX_ACK_REQUIRED);
|
|
|
|
/*
|
|
* If a frame was meant to be sent as a single non-aggregated MPDU
|
|
* but ended up in an aggregate the used tx rate doesn't correlate
|
|
* with the one specified in the TXWI as the whole aggregate is sent
|
|
* with the same rate.
|
|
*
|
|
* For example: two frames are sent to rt2x00, the first one sets
|
|
* AMPDU=1 and requests MCS7 whereas the second frame sets AMDPU=0
|
|
* and requests MCS15. If the hw aggregates both frames into one
|
|
* AMDPU the tx status for both frames will contain MCS7 although
|
|
* the frame was sent successfully.
|
|
*
|
|
* Hence, replace the requested rate with the real tx rate to not
|
|
* confuse the rate control algortihm by providing clearly wrong
|
|
* data.
|
|
*
|
|
* FIXME: if we do not find matching entry, we tell that frame was
|
|
* posted without any retries. We need to find a way to fix that
|
|
* and provide retry count.
|
|
*/
|
|
if (unlikely((aggr == 1 && ampdu == 0 && real_mcs != mcs)) || !match) {
|
|
rt2800_rate_from_status(skbdesc, status, rt2x00dev->curr_band);
|
|
mcs = real_mcs;
|
|
}
|
|
|
|
if (aggr == 1 || ampdu == 1)
|
|
__set_bit(TXDONE_AMPDU, &txdesc.flags);
|
|
|
|
if (!ack_req)
|
|
__set_bit(TXDONE_NO_ACK_REQ, &txdesc.flags);
|
|
|
|
/*
|
|
* Ralink has a retry mechanism using a global fallback
|
|
* table. We setup this fallback table to try the immediate
|
|
* lower rate for all rates. In the TX_STA_FIFO, the MCS field
|
|
* always contains the MCS used for the last transmission, be
|
|
* it successful or not.
|
|
*/
|
|
if (rt2x00_get_field32(status, TX_STA_FIFO_TX_SUCCESS)) {
|
|
/*
|
|
* Transmission succeeded. The number of retries is
|
|
* mcs - real_mcs
|
|
*/
|
|
__set_bit(TXDONE_SUCCESS, &txdesc.flags);
|
|
txdesc.retry = ((mcs > real_mcs) ? mcs - real_mcs : 0);
|
|
} else {
|
|
/*
|
|
* Transmission failed. The number of retries is
|
|
* always 7 in this case (for a total number of 8
|
|
* frames sent).
|
|
*/
|
|
__set_bit(TXDONE_FAILURE, &txdesc.flags);
|
|
txdesc.retry = rt2x00dev->long_retry;
|
|
}
|
|
|
|
/*
|
|
* the frame was retried at least once
|
|
* -> hw used fallback rates
|
|
*/
|
|
if (txdesc.retry)
|
|
__set_bit(TXDONE_FALLBACK, &txdesc.flags);
|
|
|
|
if (!match) {
|
|
/* RCU assures non-null sta will not be freed by mac80211. */
|
|
rcu_read_lock();
|
|
if (likely(wcid >= WCID_START && wcid <= WCID_END))
|
|
skbdesc->sta = drv_data->wcid_to_sta[wcid - WCID_START];
|
|
else
|
|
skbdesc->sta = NULL;
|
|
rt2x00lib_txdone_nomatch(entry, &txdesc);
|
|
rcu_read_unlock();
|
|
} else {
|
|
rt2x00lib_txdone(entry, &txdesc);
|
|
}
|
|
}
|
|
EXPORT_SYMBOL_GPL(rt2800_txdone_entry);
|
|
|
|
void rt2800_txdone(struct rt2x00_dev *rt2x00dev, unsigned int quota)
|
|
{
|
|
struct data_queue *queue;
|
|
struct queue_entry *entry;
|
|
u32 reg;
|
|
u8 qid;
|
|
bool match;
|
|
|
|
while (quota-- > 0 && kfifo_get(&rt2x00dev->txstatus_fifo, ®)) {
|
|
/*
|
|
* TX_STA_FIFO_PID_QUEUE is a 2-bit field, thus qid is
|
|
* guaranteed to be one of the TX QIDs .
|
|
*/
|
|
qid = rt2x00_get_field32(reg, TX_STA_FIFO_PID_QUEUE);
|
|
queue = rt2x00queue_get_tx_queue(rt2x00dev, qid);
|
|
|
|
if (unlikely(rt2x00queue_empty(queue))) {
|
|
rt2x00_dbg(rt2x00dev, "Got TX status for an empty queue %u, dropping\n",
|
|
qid);
|
|
break;
|
|
}
|
|
|
|
entry = rt2x00queue_get_entry(queue, Q_INDEX_DONE);
|
|
|
|
if (unlikely(test_bit(ENTRY_OWNER_DEVICE_DATA, &entry->flags) ||
|
|
!test_bit(ENTRY_DATA_STATUS_PENDING, &entry->flags))) {
|
|
rt2x00_warn(rt2x00dev, "Data pending for entry %u in queue %u\n",
|
|
entry->entry_idx, qid);
|
|
break;
|
|
}
|
|
|
|
match = rt2800_txdone_entry_check(entry, reg);
|
|
rt2800_txdone_entry(entry, reg, rt2800_drv_get_txwi(entry), match);
|
|
}
|
|
}
|
|
EXPORT_SYMBOL_GPL(rt2800_txdone);
|
|
|
|
static inline bool rt2800_entry_txstatus_timeout(struct rt2x00_dev *rt2x00dev,
|
|
struct queue_entry *entry)
|
|
{
|
|
bool ret;
|
|
unsigned long tout;
|
|
|
|
if (!test_bit(ENTRY_DATA_STATUS_PENDING, &entry->flags))
|
|
return false;
|
|
|
|
if (test_bit(DEVICE_STATE_FLUSHING, &rt2x00dev->flags))
|
|
tout = msecs_to_jiffies(50);
|
|
else
|
|
tout = msecs_to_jiffies(2000);
|
|
|
|
ret = time_after(jiffies, entry->last_action + tout);
|
|
if (unlikely(ret))
|
|
rt2x00_dbg(entry->queue->rt2x00dev,
|
|
"TX status timeout for entry %d in queue %d\n",
|
|
entry->entry_idx, entry->queue->qid);
|
|
return ret;
|
|
}
|
|
|
|
bool rt2800_txstatus_timeout(struct rt2x00_dev *rt2x00dev)
|
|
{
|
|
struct data_queue *queue;
|
|
struct queue_entry *entry;
|
|
|
|
tx_queue_for_each(rt2x00dev, queue) {
|
|
entry = rt2x00queue_get_entry(queue, Q_INDEX_DONE);
|
|
if (rt2800_entry_txstatus_timeout(rt2x00dev, entry))
|
|
return true;
|
|
}
|
|
|
|
return false;
|
|
}
|
|
EXPORT_SYMBOL_GPL(rt2800_txstatus_timeout);
|
|
|
|
/*
|
|
* test if there is an entry in any TX queue for which DMA is done
|
|
* but the TX status has not been returned yet
|
|
*/
|
|
bool rt2800_txstatus_pending(struct rt2x00_dev *rt2x00dev)
|
|
{
|
|
struct data_queue *queue;
|
|
|
|
tx_queue_for_each(rt2x00dev, queue) {
|
|
if (rt2x00queue_get_entry(queue, Q_INDEX_DMA_DONE) !=
|
|
rt2x00queue_get_entry(queue, Q_INDEX_DONE))
|
|
return true;
|
|
}
|
|
return false;
|
|
}
|
|
EXPORT_SYMBOL_GPL(rt2800_txstatus_pending);
|
|
|
|
void rt2800_txdone_nostatus(struct rt2x00_dev *rt2x00dev)
|
|
{
|
|
struct data_queue *queue;
|
|
struct queue_entry *entry;
|
|
|
|
/*
|
|
* Process any trailing TX status reports for IO failures,
|
|
* we loop until we find the first non-IO error entry. This
|
|
* can either be a frame which is free, is being uploaded,
|
|
* or has completed the upload but didn't have an entry
|
|
* in the TX_STAT_FIFO register yet.
|
|
*/
|
|
tx_queue_for_each(rt2x00dev, queue) {
|
|
while (!rt2x00queue_empty(queue)) {
|
|
entry = rt2x00queue_get_entry(queue, Q_INDEX_DONE);
|
|
|
|
if (test_bit(ENTRY_OWNER_DEVICE_DATA, &entry->flags) ||
|
|
!test_bit(ENTRY_DATA_STATUS_PENDING, &entry->flags))
|
|
break;
|
|
|
|
if (test_bit(ENTRY_DATA_IO_FAILED, &entry->flags) ||
|
|
rt2800_entry_txstatus_timeout(rt2x00dev, entry))
|
|
rt2x00lib_txdone_noinfo(entry, TXDONE_FAILURE);
|
|
else
|
|
break;
|
|
}
|
|
}
|
|
}
|
|
EXPORT_SYMBOL_GPL(rt2800_txdone_nostatus);
|
|
|
|
static int rt2800_check_hung(struct data_queue *queue)
|
|
{
|
|
unsigned int cur_idx = rt2800_drv_get_dma_done(queue);
|
|
|
|
if (queue->wd_idx != cur_idx)
|
|
queue->wd_count = 0;
|
|
else
|
|
queue->wd_count++;
|
|
|
|
return queue->wd_count > 16;
|
|
}
|
|
|
|
static void rt2800_update_survey(struct rt2x00_dev *rt2x00dev)
|
|
{
|
|
struct ieee80211_channel *chan = rt2x00dev->hw->conf.chandef.chan;
|
|
struct rt2x00_chan_survey *chan_survey =
|
|
&rt2x00dev->chan_survey[chan->hw_value];
|
|
|
|
chan_survey->time_idle += rt2800_register_read(rt2x00dev, CH_IDLE_STA);
|
|
chan_survey->time_busy += rt2800_register_read(rt2x00dev, CH_BUSY_STA);
|
|
chan_survey->time_ext_busy += rt2800_register_read(rt2x00dev, CH_BUSY_STA_SEC);
|
|
}
|
|
|
|
void rt2800_watchdog(struct rt2x00_dev *rt2x00dev)
|
|
{
|
|
struct data_queue *queue;
|
|
bool hung_tx = false;
|
|
bool hung_rx = false;
|
|
|
|
if (test_bit(DEVICE_STATE_SCANNING, &rt2x00dev->flags))
|
|
return;
|
|
|
|
rt2800_update_survey(rt2x00dev);
|
|
|
|
queue_for_each(rt2x00dev, queue) {
|
|
switch (queue->qid) {
|
|
case QID_AC_VO:
|
|
case QID_AC_VI:
|
|
case QID_AC_BE:
|
|
case QID_AC_BK:
|
|
case QID_MGMT:
|
|
if (rt2x00queue_empty(queue))
|
|
continue;
|
|
hung_tx = rt2800_check_hung(queue);
|
|
break;
|
|
case QID_RX:
|
|
/* For station mode we should reactive at least
|
|
* beacons. TODO: need to find good way detect
|
|
* RX hung for AP mode.
|
|
*/
|
|
if (rt2x00dev->intf_sta_count == 0)
|
|
continue;
|
|
hung_rx = rt2800_check_hung(queue);
|
|
break;
|
|
default:
|
|
break;
|
|
}
|
|
}
|
|
|
|
if (hung_tx)
|
|
rt2x00_warn(rt2x00dev, "Watchdog TX hung detected\n");
|
|
|
|
if (hung_rx)
|
|
rt2x00_warn(rt2x00dev, "Watchdog RX hung detected\n");
|
|
|
|
if (hung_tx || hung_rx)
|
|
ieee80211_restart_hw(rt2x00dev->hw);
|
|
}
|
|
EXPORT_SYMBOL_GPL(rt2800_watchdog);
|
|
|
|
static unsigned int rt2800_hw_beacon_base(struct rt2x00_dev *rt2x00dev,
|
|
unsigned int index)
|
|
{
|
|
return HW_BEACON_BASE(index);
|
|
}
|
|
|
|
static inline u8 rt2800_get_beacon_offset(struct rt2x00_dev *rt2x00dev,
|
|
unsigned int index)
|
|
{
|
|
return BEACON_BASE_TO_OFFSET(rt2800_hw_beacon_base(rt2x00dev, index));
|
|
}
|
|
|
|
static void rt2800_update_beacons_setup(struct rt2x00_dev *rt2x00dev)
|
|
{
|
|
struct data_queue *queue = rt2x00dev->bcn;
|
|
struct queue_entry *entry;
|
|
int i, bcn_num = 0;
|
|
u64 off, reg = 0;
|
|
u32 bssid_dw1;
|
|
|
|
/*
|
|
* Setup offsets of all active beacons in BCN_OFFSET{0,1} registers.
|
|
*/
|
|
for (i = 0; i < queue->limit; i++) {
|
|
entry = &queue->entries[i];
|
|
if (!test_bit(ENTRY_BCN_ENABLED, &entry->flags))
|
|
continue;
|
|
off = rt2800_get_beacon_offset(rt2x00dev, entry->entry_idx);
|
|
reg |= off << (8 * bcn_num);
|
|
bcn_num++;
|
|
}
|
|
|
|
rt2800_register_write(rt2x00dev, BCN_OFFSET0, (u32) reg);
|
|
rt2800_register_write(rt2x00dev, BCN_OFFSET1, (u32) (reg >> 32));
|
|
|
|
/*
|
|
* H/W sends up to MAC_BSSID_DW1_BSS_BCN_NUM + 1 consecutive beacons.
|
|
*/
|
|
bssid_dw1 = rt2800_register_read(rt2x00dev, MAC_BSSID_DW1);
|
|
rt2x00_set_field32(&bssid_dw1, MAC_BSSID_DW1_BSS_BCN_NUM,
|
|
bcn_num > 0 ? bcn_num - 1 : 0);
|
|
rt2800_register_write(rt2x00dev, MAC_BSSID_DW1, bssid_dw1);
|
|
}
|
|
|
|
void rt2800_write_beacon(struct queue_entry *entry, struct txentry_desc *txdesc)
|
|
{
|
|
struct rt2x00_dev *rt2x00dev = entry->queue->rt2x00dev;
|
|
struct skb_frame_desc *skbdesc = get_skb_frame_desc(entry->skb);
|
|
unsigned int beacon_base;
|
|
unsigned int padding_len;
|
|
u32 orig_reg, reg;
|
|
const int txwi_desc_size = entry->queue->winfo_size;
|
|
|
|
/*
|
|
* Disable beaconing while we are reloading the beacon data,
|
|
* otherwise we might be sending out invalid data.
|
|
*/
|
|
reg = rt2800_register_read(rt2x00dev, BCN_TIME_CFG);
|
|
orig_reg = reg;
|
|
rt2x00_set_field32(®, BCN_TIME_CFG_BEACON_GEN, 0);
|
|
rt2800_register_write(rt2x00dev, BCN_TIME_CFG, reg);
|
|
|
|
/*
|
|
* Add space for the TXWI in front of the skb.
|
|
*/
|
|
memset(skb_push(entry->skb, txwi_desc_size), 0, txwi_desc_size);
|
|
|
|
/*
|
|
* Register descriptor details in skb frame descriptor.
|
|
*/
|
|
skbdesc->flags |= SKBDESC_DESC_IN_SKB;
|
|
skbdesc->desc = entry->skb->data;
|
|
skbdesc->desc_len = txwi_desc_size;
|
|
|
|
/*
|
|
* Add the TXWI for the beacon to the skb.
|
|
*/
|
|
rt2800_write_tx_data(entry, txdesc);
|
|
|
|
/*
|
|
* Dump beacon to userspace through debugfs.
|
|
*/
|
|
rt2x00debug_dump_frame(rt2x00dev, DUMP_FRAME_BEACON, entry);
|
|
|
|
/*
|
|
* Write entire beacon with TXWI and padding to register.
|
|
*/
|
|
padding_len = roundup(entry->skb->len, 4) - entry->skb->len;
|
|
if (padding_len && skb_pad(entry->skb, padding_len)) {
|
|
rt2x00_err(rt2x00dev, "Failure padding beacon, aborting\n");
|
|
/* skb freed by skb_pad() on failure */
|
|
entry->skb = NULL;
|
|
rt2800_register_write(rt2x00dev, BCN_TIME_CFG, orig_reg);
|
|
return;
|
|
}
|
|
|
|
beacon_base = rt2800_hw_beacon_base(rt2x00dev, entry->entry_idx);
|
|
|
|
rt2800_register_multiwrite(rt2x00dev, beacon_base, entry->skb->data,
|
|
entry->skb->len + padding_len);
|
|
__set_bit(ENTRY_BCN_ENABLED, &entry->flags);
|
|
|
|
/*
|
|
* Change global beacons settings.
|
|
*/
|
|
rt2800_update_beacons_setup(rt2x00dev);
|
|
|
|
/*
|
|
* Restore beaconing state.
|
|
*/
|
|
rt2800_register_write(rt2x00dev, BCN_TIME_CFG, orig_reg);
|
|
|
|
/*
|
|
* Clean up beacon skb.
|
|
*/
|
|
dev_kfree_skb_any(entry->skb);
|
|
entry->skb = NULL;
|
|
}
|
|
EXPORT_SYMBOL_GPL(rt2800_write_beacon);
|
|
|
|
static inline void rt2800_clear_beacon_register(struct rt2x00_dev *rt2x00dev,
|
|
unsigned int index)
|
|
{
|
|
int i;
|
|
const int txwi_desc_size = rt2x00dev->bcn->winfo_size;
|
|
unsigned int beacon_base;
|
|
|
|
beacon_base = rt2800_hw_beacon_base(rt2x00dev, index);
|
|
|
|
/*
|
|
* For the Beacon base registers we only need to clear
|
|
* the whole TXWI which (when set to 0) will invalidate
|
|
* the entire beacon.
|
|
*/
|
|
for (i = 0; i < txwi_desc_size; i += sizeof(__le32))
|
|
rt2800_register_write(rt2x00dev, beacon_base + i, 0);
|
|
}
|
|
|
|
void rt2800_clear_beacon(struct queue_entry *entry)
|
|
{
|
|
struct rt2x00_dev *rt2x00dev = entry->queue->rt2x00dev;
|
|
u32 orig_reg, reg;
|
|
|
|
/*
|
|
* Disable beaconing while we are reloading the beacon data,
|
|
* otherwise we might be sending out invalid data.
|
|
*/
|
|
orig_reg = rt2800_register_read(rt2x00dev, BCN_TIME_CFG);
|
|
reg = orig_reg;
|
|
rt2x00_set_field32(®, BCN_TIME_CFG_BEACON_GEN, 0);
|
|
rt2800_register_write(rt2x00dev, BCN_TIME_CFG, reg);
|
|
|
|
/*
|
|
* Clear beacon.
|
|
*/
|
|
rt2800_clear_beacon_register(rt2x00dev, entry->entry_idx);
|
|
__clear_bit(ENTRY_BCN_ENABLED, &entry->flags);
|
|
|
|
/*
|
|
* Change global beacons settings.
|
|
*/
|
|
rt2800_update_beacons_setup(rt2x00dev);
|
|
/*
|
|
* Restore beaconing state.
|
|
*/
|
|
rt2800_register_write(rt2x00dev, BCN_TIME_CFG, orig_reg);
|
|
}
|
|
EXPORT_SYMBOL_GPL(rt2800_clear_beacon);
|
|
|
|
#ifdef CONFIG_RT2X00_LIB_DEBUGFS
|
|
const struct rt2x00debug rt2800_rt2x00debug = {
|
|
.owner = THIS_MODULE,
|
|
.csr = {
|
|
.read = rt2800_register_read,
|
|
.write = rt2800_register_write,
|
|
.flags = RT2X00DEBUGFS_OFFSET,
|
|
.word_base = CSR_REG_BASE,
|
|
.word_size = sizeof(u32),
|
|
.word_count = CSR_REG_SIZE / sizeof(u32),
|
|
},
|
|
.eeprom = {
|
|
/* NOTE: The local EEPROM access functions can't
|
|
* be used here, use the generic versions instead.
|
|
*/
|
|
.read = rt2x00_eeprom_read,
|
|
.write = rt2x00_eeprom_write,
|
|
.word_base = EEPROM_BASE,
|
|
.word_size = sizeof(u16),
|
|
.word_count = EEPROM_SIZE / sizeof(u16),
|
|
},
|
|
.bbp = {
|
|
.read = rt2800_bbp_read,
|
|
.write = rt2800_bbp_write,
|
|
.word_base = BBP_BASE,
|
|
.word_size = sizeof(u8),
|
|
.word_count = BBP_SIZE / sizeof(u8),
|
|
},
|
|
.rf = {
|
|
.read = rt2x00_rf_read,
|
|
.write = rt2800_rf_write,
|
|
.word_base = RF_BASE,
|
|
.word_size = sizeof(u32),
|
|
.word_count = RF_SIZE / sizeof(u32),
|
|
},
|
|
.rfcsr = {
|
|
.read = rt2800_rfcsr_read,
|
|
.write = rt2800_rfcsr_write,
|
|
.word_base = RFCSR_BASE,
|
|
.word_size = sizeof(u8),
|
|
.word_count = RFCSR_SIZE / sizeof(u8),
|
|
},
|
|
};
|
|
EXPORT_SYMBOL_GPL(rt2800_rt2x00debug);
|
|
#endif /* CONFIG_RT2X00_LIB_DEBUGFS */
|
|
|
|
int rt2800_rfkill_poll(struct rt2x00_dev *rt2x00dev)
|
|
{
|
|
u32 reg;
|
|
|
|
if (rt2x00_rt(rt2x00dev, RT3290)) {
|
|
reg = rt2800_register_read(rt2x00dev, WLAN_FUN_CTRL);
|
|
return rt2x00_get_field32(reg, WLAN_GPIO_IN_BIT0);
|
|
} else {
|
|
reg = rt2800_register_read(rt2x00dev, GPIO_CTRL);
|
|
return rt2x00_get_field32(reg, GPIO_CTRL_VAL2);
|
|
}
|
|
}
|
|
EXPORT_SYMBOL_GPL(rt2800_rfkill_poll);
|
|
|
|
#ifdef CONFIG_RT2X00_LIB_LEDS
|
|
static void rt2800_brightness_set(struct led_classdev *led_cdev,
|
|
enum led_brightness brightness)
|
|
{
|
|
struct rt2x00_led *led =
|
|
container_of(led_cdev, struct rt2x00_led, led_dev);
|
|
unsigned int enabled = brightness != LED_OFF;
|
|
unsigned int bg_mode =
|
|
(enabled && led->rt2x00dev->curr_band == NL80211_BAND_2GHZ);
|
|
unsigned int polarity =
|
|
rt2x00_get_field16(led->rt2x00dev->led_mcu_reg,
|
|
EEPROM_FREQ_LED_POLARITY);
|
|
unsigned int ledmode =
|
|
rt2x00_get_field16(led->rt2x00dev->led_mcu_reg,
|
|
EEPROM_FREQ_LED_MODE);
|
|
u32 reg;
|
|
|
|
/* Check for SoC (SOC devices don't support MCU requests) */
|
|
if (rt2x00_is_soc(led->rt2x00dev)) {
|
|
reg = rt2800_register_read(led->rt2x00dev, LED_CFG);
|
|
|
|
/* Set LED Polarity */
|
|
rt2x00_set_field32(®, LED_CFG_LED_POLAR, polarity);
|
|
|
|
/* Set LED Mode */
|
|
if (led->type == LED_TYPE_RADIO) {
|
|
rt2x00_set_field32(®, LED_CFG_G_LED_MODE,
|
|
enabled ? 3 : 0);
|
|
} else if (led->type == LED_TYPE_ASSOC) {
|
|
rt2x00_set_field32(®, LED_CFG_Y_LED_MODE,
|
|
enabled ? 3 : 0);
|
|
} else if (led->type == LED_TYPE_QUALITY) {
|
|
rt2x00_set_field32(®, LED_CFG_R_LED_MODE,
|
|
enabled ? 3 : 0);
|
|
}
|
|
|
|
rt2800_register_write(led->rt2x00dev, LED_CFG, reg);
|
|
|
|
} else {
|
|
if (led->type == LED_TYPE_RADIO) {
|
|
rt2800_mcu_request(led->rt2x00dev, MCU_LED, 0xff, ledmode,
|
|
enabled ? 0x20 : 0);
|
|
} else if (led->type == LED_TYPE_ASSOC) {
|
|
rt2800_mcu_request(led->rt2x00dev, MCU_LED, 0xff, ledmode,
|
|
enabled ? (bg_mode ? 0x60 : 0xa0) : 0x20);
|
|
} else if (led->type == LED_TYPE_QUALITY) {
|
|
/*
|
|
* The brightness is divided into 6 levels (0 - 5),
|
|
* The specs tell us the following levels:
|
|
* 0, 1 ,3, 7, 15, 31
|
|
* to determine the level in a simple way we can simply
|
|
* work with bitshifting:
|
|
* (1 << level) - 1
|
|
*/
|
|
rt2800_mcu_request(led->rt2x00dev, MCU_LED_STRENGTH, 0xff,
|
|
(1 << brightness / (LED_FULL / 6)) - 1,
|
|
polarity);
|
|
}
|
|
}
|
|
}
|
|
|
|
static void rt2800_init_led(struct rt2x00_dev *rt2x00dev,
|
|
struct rt2x00_led *led, enum led_type type)
|
|
{
|
|
led->rt2x00dev = rt2x00dev;
|
|
led->type = type;
|
|
led->led_dev.brightness_set = rt2800_brightness_set;
|
|
led->flags = LED_INITIALIZED;
|
|
}
|
|
#endif /* CONFIG_RT2X00_LIB_LEDS */
|
|
|
|
/*
|
|
* Configuration handlers.
|
|
*/
|
|
static void rt2800_config_wcid(struct rt2x00_dev *rt2x00dev,
|
|
const u8 *address,
|
|
int wcid)
|
|
{
|
|
struct mac_wcid_entry wcid_entry;
|
|
u32 offset;
|
|
|
|
offset = MAC_WCID_ENTRY(wcid);
|
|
|
|
memset(&wcid_entry, 0xff, sizeof(wcid_entry));
|
|
if (address)
|
|
memcpy(wcid_entry.mac, address, ETH_ALEN);
|
|
|
|
rt2800_register_multiwrite(rt2x00dev, offset,
|
|
&wcid_entry, sizeof(wcid_entry));
|
|
}
|
|
|
|
static void rt2800_delete_wcid_attr(struct rt2x00_dev *rt2x00dev, int wcid)
|
|
{
|
|
u32 offset;
|
|
offset = MAC_WCID_ATTR_ENTRY(wcid);
|
|
rt2800_register_write(rt2x00dev, offset, 0);
|
|
}
|
|
|
|
static void rt2800_config_wcid_attr_bssidx(struct rt2x00_dev *rt2x00dev,
|
|
int wcid, u32 bssidx)
|
|
{
|
|
u32 offset = MAC_WCID_ATTR_ENTRY(wcid);
|
|
u32 reg;
|
|
|
|
/*
|
|
* The BSS Idx numbers is split in a main value of 3 bits,
|
|
* and a extended field for adding one additional bit to the value.
|
|
*/
|
|
reg = rt2800_register_read(rt2x00dev, offset);
|
|
rt2x00_set_field32(®, MAC_WCID_ATTRIBUTE_BSS_IDX, (bssidx & 0x7));
|
|
rt2x00_set_field32(®, MAC_WCID_ATTRIBUTE_BSS_IDX_EXT,
|
|
(bssidx & 0x8) >> 3);
|
|
rt2800_register_write(rt2x00dev, offset, reg);
|
|
}
|
|
|
|
static void rt2800_config_wcid_attr_cipher(struct rt2x00_dev *rt2x00dev,
|
|
struct rt2x00lib_crypto *crypto,
|
|
struct ieee80211_key_conf *key)
|
|
{
|
|
struct mac_iveiv_entry iveiv_entry;
|
|
u32 offset;
|
|
u32 reg;
|
|
|
|
offset = MAC_WCID_ATTR_ENTRY(key->hw_key_idx);
|
|
|
|
if (crypto->cmd == SET_KEY) {
|
|
reg = rt2800_register_read(rt2x00dev, offset);
|
|
rt2x00_set_field32(®, MAC_WCID_ATTRIBUTE_KEYTAB,
|
|
!!(key->flags & IEEE80211_KEY_FLAG_PAIRWISE));
|
|
/*
|
|
* Both the cipher as the BSS Idx numbers are split in a main
|
|
* value of 3 bits, and a extended field for adding one additional
|
|
* bit to the value.
|
|
*/
|
|
rt2x00_set_field32(®, MAC_WCID_ATTRIBUTE_CIPHER,
|
|
(crypto->cipher & 0x7));
|
|
rt2x00_set_field32(®, MAC_WCID_ATTRIBUTE_CIPHER_EXT,
|
|
(crypto->cipher & 0x8) >> 3);
|
|
rt2x00_set_field32(®, MAC_WCID_ATTRIBUTE_RX_WIUDF, crypto->cipher);
|
|
rt2800_register_write(rt2x00dev, offset, reg);
|
|
} else {
|
|
/* Delete the cipher without touching the bssidx */
|
|
reg = rt2800_register_read(rt2x00dev, offset);
|
|
rt2x00_set_field32(®, MAC_WCID_ATTRIBUTE_KEYTAB, 0);
|
|
rt2x00_set_field32(®, MAC_WCID_ATTRIBUTE_CIPHER, 0);
|
|
rt2x00_set_field32(®, MAC_WCID_ATTRIBUTE_CIPHER_EXT, 0);
|
|
rt2x00_set_field32(®, MAC_WCID_ATTRIBUTE_RX_WIUDF, 0);
|
|
rt2800_register_write(rt2x00dev, offset, reg);
|
|
}
|
|
|
|
if (test_bit(DEVICE_STATE_RESET, &rt2x00dev->flags))
|
|
return;
|
|
|
|
offset = MAC_IVEIV_ENTRY(key->hw_key_idx);
|
|
|
|
memset(&iveiv_entry, 0, sizeof(iveiv_entry));
|
|
if ((crypto->cipher == CIPHER_TKIP) ||
|
|
(crypto->cipher == CIPHER_TKIP_NO_MIC) ||
|
|
(crypto->cipher == CIPHER_AES))
|
|
iveiv_entry.iv[3] |= 0x20;
|
|
iveiv_entry.iv[3] |= key->keyidx << 6;
|
|
rt2800_register_multiwrite(rt2x00dev, offset,
|
|
&iveiv_entry, sizeof(iveiv_entry));
|
|
}
|
|
|
|
int rt2800_config_shared_key(struct rt2x00_dev *rt2x00dev,
|
|
struct rt2x00lib_crypto *crypto,
|
|
struct ieee80211_key_conf *key)
|
|
{
|
|
struct hw_key_entry key_entry;
|
|
struct rt2x00_field32 field;
|
|
u32 offset;
|
|
u32 reg;
|
|
|
|
if (crypto->cmd == SET_KEY) {
|
|
key->hw_key_idx = (4 * crypto->bssidx) + key->keyidx;
|
|
|
|
memcpy(key_entry.key, crypto->key,
|
|
sizeof(key_entry.key));
|
|
memcpy(key_entry.tx_mic, crypto->tx_mic,
|
|
sizeof(key_entry.tx_mic));
|
|
memcpy(key_entry.rx_mic, crypto->rx_mic,
|
|
sizeof(key_entry.rx_mic));
|
|
|
|
offset = SHARED_KEY_ENTRY(key->hw_key_idx);
|
|
rt2800_register_multiwrite(rt2x00dev, offset,
|
|
&key_entry, sizeof(key_entry));
|
|
}
|
|
|
|
/*
|
|
* The cipher types are stored over multiple registers
|
|
* starting with SHARED_KEY_MODE_BASE each word will have
|
|
* 32 bits and contains the cipher types for 2 bssidx each.
|
|
* Using the correct defines correctly will cause overhead,
|
|
* so just calculate the correct offset.
|
|
*/
|
|
field.bit_offset = 4 * (key->hw_key_idx % 8);
|
|
field.bit_mask = 0x7 << field.bit_offset;
|
|
|
|
offset = SHARED_KEY_MODE_ENTRY(key->hw_key_idx / 8);
|
|
|
|
reg = rt2800_register_read(rt2x00dev, offset);
|
|
rt2x00_set_field32(®, field,
|
|
(crypto->cmd == SET_KEY) * crypto->cipher);
|
|
rt2800_register_write(rt2x00dev, offset, reg);
|
|
|
|
/*
|
|
* Update WCID information
|
|
*/
|
|
rt2800_config_wcid(rt2x00dev, crypto->address, key->hw_key_idx);
|
|
rt2800_config_wcid_attr_bssidx(rt2x00dev, key->hw_key_idx,
|
|
crypto->bssidx);
|
|
rt2800_config_wcid_attr_cipher(rt2x00dev, crypto, key);
|
|
|
|
return 0;
|
|
}
|
|
EXPORT_SYMBOL_GPL(rt2800_config_shared_key);
|
|
|
|
int rt2800_config_pairwise_key(struct rt2x00_dev *rt2x00dev,
|
|
struct rt2x00lib_crypto *crypto,
|
|
struct ieee80211_key_conf *key)
|
|
{
|
|
struct hw_key_entry key_entry;
|
|
u32 offset;
|
|
|
|
if (crypto->cmd == SET_KEY) {
|
|
/*
|
|
* Allow key configuration only for STAs that are
|
|
* known by the hw.
|
|
*/
|
|
if (crypto->wcid > WCID_END)
|
|
return -ENOSPC;
|
|
key->hw_key_idx = crypto->wcid;
|
|
|
|
memcpy(key_entry.key, crypto->key,
|
|
sizeof(key_entry.key));
|
|
memcpy(key_entry.tx_mic, crypto->tx_mic,
|
|
sizeof(key_entry.tx_mic));
|
|
memcpy(key_entry.rx_mic, crypto->rx_mic,
|
|
sizeof(key_entry.rx_mic));
|
|
|
|
offset = PAIRWISE_KEY_ENTRY(key->hw_key_idx);
|
|
rt2800_register_multiwrite(rt2x00dev, offset,
|
|
&key_entry, sizeof(key_entry));
|
|
}
|
|
|
|
/*
|
|
* Update WCID information
|
|
*/
|
|
rt2800_config_wcid_attr_cipher(rt2x00dev, crypto, key);
|
|
|
|
return 0;
|
|
}
|
|
EXPORT_SYMBOL_GPL(rt2800_config_pairwise_key);
|
|
|
|
static void rt2800_set_max_psdu_len(struct rt2x00_dev *rt2x00dev)
|
|
{
|
|
u8 i, max_psdu;
|
|
u32 reg;
|
|
struct rt2800_drv_data *drv_data = rt2x00dev->drv_data;
|
|
|
|
for (i = 0; i < 3; i++)
|
|
if (drv_data->ampdu_factor_cnt[i] > 0)
|
|
break;
|
|
|
|
max_psdu = min(drv_data->max_psdu, i);
|
|
|
|
reg = rt2800_register_read(rt2x00dev, MAX_LEN_CFG);
|
|
rt2x00_set_field32(®, MAX_LEN_CFG_MAX_PSDU, max_psdu);
|
|
rt2800_register_write(rt2x00dev, MAX_LEN_CFG, reg);
|
|
}
|
|
|
|
int rt2800_sta_add(struct ieee80211_hw *hw, struct ieee80211_vif *vif,
|
|
struct ieee80211_sta *sta)
|
|
{
|
|
struct rt2x00_dev *rt2x00dev = hw->priv;
|
|
struct rt2800_drv_data *drv_data = rt2x00dev->drv_data;
|
|
struct rt2x00_sta *sta_priv = sta_to_rt2x00_sta(sta);
|
|
int wcid;
|
|
|
|
/*
|
|
* Limit global maximum TX AMPDU length to smallest value of all
|
|
* connected stations. In AP mode this can be suboptimal, but we
|
|
* do not have a choice if some connected STA is not capable to
|
|
* receive the same amount of data like the others.
|
|
*/
|
|
if (sta->deflink.ht_cap.ht_supported) {
|
|
drv_data->ampdu_factor_cnt[sta->deflink.ht_cap.ampdu_factor & 3]++;
|
|
rt2800_set_max_psdu_len(rt2x00dev);
|
|
}
|
|
|
|
/*
|
|
* Search for the first free WCID entry and return the corresponding
|
|
* index.
|
|
*/
|
|
wcid = find_first_zero_bit(drv_data->sta_ids, STA_IDS_SIZE) + WCID_START;
|
|
|
|
/*
|
|
* Store selected wcid even if it is invalid so that we can
|
|
* later decide if the STA is uploaded into the hw.
|
|
*/
|
|
sta_priv->wcid = wcid;
|
|
|
|
/*
|
|
* No space left in the device, however, we can still communicate
|
|
* with the STA -> No error.
|
|
*/
|
|
if (wcid > WCID_END)
|
|
return 0;
|
|
|
|
__set_bit(wcid - WCID_START, drv_data->sta_ids);
|
|
drv_data->wcid_to_sta[wcid - WCID_START] = sta;
|
|
|
|
/*
|
|
* Clean up WCID attributes and write STA address to the device.
|
|
*/
|
|
rt2800_delete_wcid_attr(rt2x00dev, wcid);
|
|
rt2800_config_wcid(rt2x00dev, sta->addr, wcid);
|
|
rt2800_config_wcid_attr_bssidx(rt2x00dev, wcid,
|
|
rt2x00lib_get_bssidx(rt2x00dev, vif));
|
|
return 0;
|
|
}
|
|
EXPORT_SYMBOL_GPL(rt2800_sta_add);
|
|
|
|
int rt2800_sta_remove(struct ieee80211_hw *hw, struct ieee80211_vif *vif,
|
|
struct ieee80211_sta *sta)
|
|
{
|
|
struct rt2x00_dev *rt2x00dev = hw->priv;
|
|
struct rt2800_drv_data *drv_data = rt2x00dev->drv_data;
|
|
struct rt2x00_sta *sta_priv = sta_to_rt2x00_sta(sta);
|
|
int wcid = sta_priv->wcid;
|
|
|
|
if (sta->deflink.ht_cap.ht_supported) {
|
|
drv_data->ampdu_factor_cnt[sta->deflink.ht_cap.ampdu_factor & 3]--;
|
|
rt2800_set_max_psdu_len(rt2x00dev);
|
|
}
|
|
|
|
if (wcid > WCID_END)
|
|
return 0;
|
|
/*
|
|
* Remove WCID entry, no need to clean the attributes as they will
|
|
* get renewed when the WCID is reused.
|
|
*/
|
|
rt2800_config_wcid(rt2x00dev, NULL, wcid);
|
|
drv_data->wcid_to_sta[wcid - WCID_START] = NULL;
|
|
__clear_bit(wcid - WCID_START, drv_data->sta_ids);
|
|
|
|
return 0;
|
|
}
|
|
EXPORT_SYMBOL_GPL(rt2800_sta_remove);
|
|
|
|
void rt2800_pre_reset_hw(struct rt2x00_dev *rt2x00dev)
|
|
{
|
|
struct rt2800_drv_data *drv_data = rt2x00dev->drv_data;
|
|
struct data_queue *queue = rt2x00dev->bcn;
|
|
struct queue_entry *entry;
|
|
int i, wcid;
|
|
|
|
for (wcid = WCID_START; wcid < WCID_END; wcid++) {
|
|
drv_data->wcid_to_sta[wcid - WCID_START] = NULL;
|
|
__clear_bit(wcid - WCID_START, drv_data->sta_ids);
|
|
}
|
|
|
|
for (i = 0; i < queue->limit; i++) {
|
|
entry = &queue->entries[i];
|
|
clear_bit(ENTRY_BCN_ASSIGNED, &entry->flags);
|
|
}
|
|
}
|
|
EXPORT_SYMBOL_GPL(rt2800_pre_reset_hw);
|
|
|
|
void rt2800_config_filter(struct rt2x00_dev *rt2x00dev,
|
|
const unsigned int filter_flags)
|
|
{
|
|
u32 reg;
|
|
|
|
/*
|
|
* Start configuration steps.
|
|
* Note that the version error will always be dropped
|
|
* and broadcast frames will always be accepted since
|
|
* there is no filter for it at this time.
|
|
*/
|
|
reg = rt2800_register_read(rt2x00dev, RX_FILTER_CFG);
|
|
rt2x00_set_field32(®, RX_FILTER_CFG_DROP_CRC_ERROR,
|
|
!(filter_flags & FIF_FCSFAIL));
|
|
rt2x00_set_field32(®, RX_FILTER_CFG_DROP_PHY_ERROR,
|
|
!(filter_flags & FIF_PLCPFAIL));
|
|
rt2x00_set_field32(®, RX_FILTER_CFG_DROP_NOT_TO_ME,
|
|
!test_bit(CONFIG_MONITORING, &rt2x00dev->flags));
|
|
rt2x00_set_field32(®, RX_FILTER_CFG_DROP_NOT_MY_BSSD, 0);
|
|
rt2x00_set_field32(®, RX_FILTER_CFG_DROP_VER_ERROR, 1);
|
|
rt2x00_set_field32(®, RX_FILTER_CFG_DROP_MULTICAST,
|
|
!(filter_flags & FIF_ALLMULTI));
|
|
rt2x00_set_field32(®, RX_FILTER_CFG_DROP_BROADCAST, 0);
|
|
rt2x00_set_field32(®, RX_FILTER_CFG_DROP_DUPLICATE, 1);
|
|
rt2x00_set_field32(®, RX_FILTER_CFG_DROP_CF_END_ACK,
|
|
!(filter_flags & FIF_CONTROL));
|
|
rt2x00_set_field32(®, RX_FILTER_CFG_DROP_CF_END,
|
|
!(filter_flags & FIF_CONTROL));
|
|
rt2x00_set_field32(®, RX_FILTER_CFG_DROP_ACK,
|
|
!(filter_flags & FIF_CONTROL));
|
|
rt2x00_set_field32(®, RX_FILTER_CFG_DROP_CTS,
|
|
!(filter_flags & FIF_CONTROL));
|
|
rt2x00_set_field32(®, RX_FILTER_CFG_DROP_RTS,
|
|
!(filter_flags & FIF_CONTROL));
|
|
rt2x00_set_field32(®, RX_FILTER_CFG_DROP_PSPOLL,
|
|
!(filter_flags & FIF_PSPOLL));
|
|
rt2x00_set_field32(®, RX_FILTER_CFG_DROP_BA, 0);
|
|
rt2x00_set_field32(®, RX_FILTER_CFG_DROP_BAR,
|
|
!(filter_flags & FIF_CONTROL));
|
|
rt2x00_set_field32(®, RX_FILTER_CFG_DROP_CNTL,
|
|
!(filter_flags & FIF_CONTROL));
|
|
rt2800_register_write(rt2x00dev, RX_FILTER_CFG, reg);
|
|
}
|
|
EXPORT_SYMBOL_GPL(rt2800_config_filter);
|
|
|
|
void rt2800_config_intf(struct rt2x00_dev *rt2x00dev, struct rt2x00_intf *intf,
|
|
struct rt2x00intf_conf *conf, const unsigned int flags)
|
|
{
|
|
u32 reg;
|
|
bool update_bssid = false;
|
|
|
|
if (flags & CONFIG_UPDATE_TYPE) {
|
|
/*
|
|
* Enable synchronisation.
|
|
*/
|
|
reg = rt2800_register_read(rt2x00dev, BCN_TIME_CFG);
|
|
rt2x00_set_field32(®, BCN_TIME_CFG_TSF_SYNC, conf->sync);
|
|
rt2800_register_write(rt2x00dev, BCN_TIME_CFG, reg);
|
|
|
|
if (conf->sync == TSF_SYNC_AP_NONE) {
|
|
/*
|
|
* Tune beacon queue transmit parameters for AP mode
|
|
*/
|
|
reg = rt2800_register_read(rt2x00dev, TBTT_SYNC_CFG);
|
|
rt2x00_set_field32(®, TBTT_SYNC_CFG_BCN_CWMIN, 0);
|
|
rt2x00_set_field32(®, TBTT_SYNC_CFG_BCN_AIFSN, 1);
|
|
rt2x00_set_field32(®, TBTT_SYNC_CFG_BCN_EXP_WIN, 32);
|
|
rt2x00_set_field32(®, TBTT_SYNC_CFG_TBTT_ADJUST, 0);
|
|
rt2800_register_write(rt2x00dev, TBTT_SYNC_CFG, reg);
|
|
} else {
|
|
reg = rt2800_register_read(rt2x00dev, TBTT_SYNC_CFG);
|
|
rt2x00_set_field32(®, TBTT_SYNC_CFG_BCN_CWMIN, 4);
|
|
rt2x00_set_field32(®, TBTT_SYNC_CFG_BCN_AIFSN, 2);
|
|
rt2x00_set_field32(®, TBTT_SYNC_CFG_BCN_EXP_WIN, 32);
|
|
rt2x00_set_field32(®, TBTT_SYNC_CFG_TBTT_ADJUST, 16);
|
|
rt2800_register_write(rt2x00dev, TBTT_SYNC_CFG, reg);
|
|
}
|
|
}
|
|
|
|
if (flags & CONFIG_UPDATE_MAC) {
|
|
if (flags & CONFIG_UPDATE_TYPE &&
|
|
conf->sync == TSF_SYNC_AP_NONE) {
|
|
/*
|
|
* The BSSID register has to be set to our own mac
|
|
* address in AP mode.
|
|
*/
|
|
memcpy(conf->bssid, conf->mac, sizeof(conf->mac));
|
|
update_bssid = true;
|
|
}
|
|
|
|
if (!is_zero_ether_addr((const u8 *)conf->mac)) {
|
|
reg = le32_to_cpu(conf->mac[1]);
|
|
rt2x00_set_field32(®, MAC_ADDR_DW1_UNICAST_TO_ME_MASK, 0xff);
|
|
conf->mac[1] = cpu_to_le32(reg);
|
|
}
|
|
|
|
rt2800_register_multiwrite(rt2x00dev, MAC_ADDR_DW0,
|
|
conf->mac, sizeof(conf->mac));
|
|
}
|
|
|
|
if ((flags & CONFIG_UPDATE_BSSID) || update_bssid) {
|
|
if (!is_zero_ether_addr((const u8 *)conf->bssid)) {
|
|
reg = le32_to_cpu(conf->bssid[1]);
|
|
rt2x00_set_field32(®, MAC_BSSID_DW1_BSS_ID_MASK, 3);
|
|
rt2x00_set_field32(®, MAC_BSSID_DW1_BSS_BCN_NUM, 0);
|
|
conf->bssid[1] = cpu_to_le32(reg);
|
|
}
|
|
|
|
rt2800_register_multiwrite(rt2x00dev, MAC_BSSID_DW0,
|
|
conf->bssid, sizeof(conf->bssid));
|
|
}
|
|
}
|
|
EXPORT_SYMBOL_GPL(rt2800_config_intf);
|
|
|
|
static void rt2800_config_ht_opmode(struct rt2x00_dev *rt2x00dev,
|
|
struct rt2x00lib_erp *erp)
|
|
{
|
|
bool any_sta_nongf = !!(erp->ht_opmode &
|
|
IEEE80211_HT_OP_MODE_NON_GF_STA_PRSNT);
|
|
u8 protection = erp->ht_opmode & IEEE80211_HT_OP_MODE_PROTECTION;
|
|
u8 mm20_mode, mm40_mode, gf20_mode, gf40_mode;
|
|
u16 mm20_rate, mm40_rate, gf20_rate, gf40_rate;
|
|
u32 reg;
|
|
|
|
/* default protection rate for HT20: OFDM 24M */
|
|
mm20_rate = gf20_rate = 0x4004;
|
|
|
|
/* default protection rate for HT40: duplicate OFDM 24M */
|
|
mm40_rate = gf40_rate = 0x4084;
|
|
|
|
switch (protection) {
|
|
case IEEE80211_HT_OP_MODE_PROTECTION_NONE:
|
|
/*
|
|
* All STAs in this BSS are HT20/40 but there might be
|
|
* STAs not supporting greenfield mode.
|
|
* => Disable protection for HT transmissions.
|
|
*/
|
|
mm20_mode = mm40_mode = gf20_mode = gf40_mode = 0;
|
|
|
|
break;
|
|
case IEEE80211_HT_OP_MODE_PROTECTION_20MHZ:
|
|
/*
|
|
* All STAs in this BSS are HT20 or HT20/40 but there
|
|
* might be STAs not supporting greenfield mode.
|
|
* => Protect all HT40 transmissions.
|
|
*/
|
|
mm20_mode = gf20_mode = 0;
|
|
mm40_mode = gf40_mode = 1;
|
|
|
|
break;
|
|
case IEEE80211_HT_OP_MODE_PROTECTION_NONMEMBER:
|
|
/*
|
|
* Nonmember protection:
|
|
* According to 802.11n we _should_ protect all
|
|
* HT transmissions (but we don't have to).
|
|
*
|
|
* But if cts_protection is enabled we _shall_ protect
|
|
* all HT transmissions using a CCK rate.
|
|
*
|
|
* And if any station is non GF we _shall_ protect
|
|
* GF transmissions.
|
|
*
|
|
* We decide to protect everything
|
|
* -> fall through to mixed mode.
|
|
*/
|
|
case IEEE80211_HT_OP_MODE_PROTECTION_NONHT_MIXED:
|
|
/*
|
|
* Legacy STAs are present
|
|
* => Protect all HT transmissions.
|
|
*/
|
|
mm20_mode = mm40_mode = gf20_mode = gf40_mode = 1;
|
|
|
|
/*
|
|
* If erp protection is needed we have to protect HT
|
|
* transmissions with CCK 11M long preamble.
|
|
*/
|
|
if (erp->cts_protection) {
|
|
/* don't duplicate RTS/CTS in CCK mode */
|
|
mm20_rate = mm40_rate = 0x0003;
|
|
gf20_rate = gf40_rate = 0x0003;
|
|
}
|
|
break;
|
|
}
|
|
|
|
/* check for STAs not supporting greenfield mode */
|
|
if (any_sta_nongf)
|
|
gf20_mode = gf40_mode = 1;
|
|
|
|
/* Update HT protection config */
|
|
reg = rt2800_register_read(rt2x00dev, MM20_PROT_CFG);
|
|
rt2x00_set_field32(®, MM20_PROT_CFG_PROTECT_RATE, mm20_rate);
|
|
rt2x00_set_field32(®, MM20_PROT_CFG_PROTECT_CTRL, mm20_mode);
|
|
rt2800_register_write(rt2x00dev, MM20_PROT_CFG, reg);
|
|
|
|
reg = rt2800_register_read(rt2x00dev, MM40_PROT_CFG);
|
|
rt2x00_set_field32(®, MM40_PROT_CFG_PROTECT_RATE, mm40_rate);
|
|
rt2x00_set_field32(®, MM40_PROT_CFG_PROTECT_CTRL, mm40_mode);
|
|
rt2800_register_write(rt2x00dev, MM40_PROT_CFG, reg);
|
|
|
|
reg = rt2800_register_read(rt2x00dev, GF20_PROT_CFG);
|
|
rt2x00_set_field32(®, GF20_PROT_CFG_PROTECT_RATE, gf20_rate);
|
|
rt2x00_set_field32(®, GF20_PROT_CFG_PROTECT_CTRL, gf20_mode);
|
|
rt2800_register_write(rt2x00dev, GF20_PROT_CFG, reg);
|
|
|
|
reg = rt2800_register_read(rt2x00dev, GF40_PROT_CFG);
|
|
rt2x00_set_field32(®, GF40_PROT_CFG_PROTECT_RATE, gf40_rate);
|
|
rt2x00_set_field32(®, GF40_PROT_CFG_PROTECT_CTRL, gf40_mode);
|
|
rt2800_register_write(rt2x00dev, GF40_PROT_CFG, reg);
|
|
}
|
|
|
|
void rt2800_config_erp(struct rt2x00_dev *rt2x00dev, struct rt2x00lib_erp *erp,
|
|
u32 changed)
|
|
{
|
|
u32 reg;
|
|
|
|
if (changed & BSS_CHANGED_ERP_PREAMBLE) {
|
|
reg = rt2800_register_read(rt2x00dev, AUTO_RSP_CFG);
|
|
rt2x00_set_field32(®, AUTO_RSP_CFG_AR_PREAMBLE,
|
|
!!erp->short_preamble);
|
|
rt2800_register_write(rt2x00dev, AUTO_RSP_CFG, reg);
|
|
}
|
|
|
|
if (changed & BSS_CHANGED_ERP_CTS_PROT) {
|
|
reg = rt2800_register_read(rt2x00dev, OFDM_PROT_CFG);
|
|
rt2x00_set_field32(®, OFDM_PROT_CFG_PROTECT_CTRL,
|
|
erp->cts_protection ? 2 : 0);
|
|
rt2800_register_write(rt2x00dev, OFDM_PROT_CFG, reg);
|
|
}
|
|
|
|
if (changed & BSS_CHANGED_BASIC_RATES) {
|
|
rt2800_register_write(rt2x00dev, LEGACY_BASIC_RATE,
|
|
0xff0 | erp->basic_rates);
|
|
rt2800_register_write(rt2x00dev, HT_BASIC_RATE, 0x00008003);
|
|
}
|
|
|
|
if (changed & BSS_CHANGED_ERP_SLOT) {
|
|
reg = rt2800_register_read(rt2x00dev, BKOFF_SLOT_CFG);
|
|
rt2x00_set_field32(®, BKOFF_SLOT_CFG_SLOT_TIME,
|
|
erp->slot_time);
|
|
rt2800_register_write(rt2x00dev, BKOFF_SLOT_CFG, reg);
|
|
|
|
reg = rt2800_register_read(rt2x00dev, XIFS_TIME_CFG);
|
|
rt2x00_set_field32(®, XIFS_TIME_CFG_EIFS, erp->eifs);
|
|
rt2800_register_write(rt2x00dev, XIFS_TIME_CFG, reg);
|
|
}
|
|
|
|
if (changed & BSS_CHANGED_BEACON_INT) {
|
|
reg = rt2800_register_read(rt2x00dev, BCN_TIME_CFG);
|
|
rt2x00_set_field32(®, BCN_TIME_CFG_BEACON_INTERVAL,
|
|
erp->beacon_int * 16);
|
|
rt2800_register_write(rt2x00dev, BCN_TIME_CFG, reg);
|
|
}
|
|
|
|
if (changed & BSS_CHANGED_HT)
|
|
rt2800_config_ht_opmode(rt2x00dev, erp);
|
|
}
|
|
EXPORT_SYMBOL_GPL(rt2800_config_erp);
|
|
|
|
static int rt2800_wait_bbp_rf_ready(struct rt2x00_dev *rt2x00dev,
|
|
const struct rt2x00_field32 mask)
|
|
{
|
|
unsigned int i;
|
|
u32 reg;
|
|
|
|
for (i = 0; i < REGISTER_BUSY_COUNT; i++) {
|
|
reg = rt2800_register_read(rt2x00dev, MAC_STATUS_CFG);
|
|
if (!rt2x00_get_field32(reg, mask))
|
|
return 0;
|
|
|
|
udelay(REGISTER_BUSY_DELAY);
|
|
}
|
|
|
|
rt2x00_err(rt2x00dev, "BBP/RF register access failed, aborting\n");
|
|
return -EACCES;
|
|
}
|
|
|
|
static int rt2800_wait_bbp_ready(struct rt2x00_dev *rt2x00dev)
|
|
{
|
|
unsigned int i;
|
|
u8 value;
|
|
|
|
/*
|
|
* BBP was enabled after firmware was loaded,
|
|
* but we need to reactivate it now.
|
|
*/
|
|
rt2800_register_write(rt2x00dev, H2M_BBP_AGENT, 0);
|
|
rt2800_register_write(rt2x00dev, H2M_MAILBOX_CSR, 0);
|
|
msleep(1);
|
|
|
|
for (i = 0; i < REGISTER_BUSY_COUNT; i++) {
|
|
value = rt2800_bbp_read(rt2x00dev, 0);
|
|
if ((value != 0xff) && (value != 0x00))
|
|
return 0;
|
|
udelay(REGISTER_BUSY_DELAY);
|
|
}
|
|
|
|
rt2x00_err(rt2x00dev, "BBP register access failed, aborting\n");
|
|
return -EACCES;
|
|
}
|
|
|
|
static void rt2800_config_3572bt_ant(struct rt2x00_dev *rt2x00dev)
|
|
{
|
|
u32 reg;
|
|
u16 eeprom;
|
|
u8 led_ctrl, led_g_mode, led_r_mode;
|
|
|
|
reg = rt2800_register_read(rt2x00dev, GPIO_SWITCH);
|
|
if (rt2x00dev->curr_band == NL80211_BAND_5GHZ) {
|
|
rt2x00_set_field32(®, GPIO_SWITCH_0, 1);
|
|
rt2x00_set_field32(®, GPIO_SWITCH_1, 1);
|
|
} else {
|
|
rt2x00_set_field32(®, GPIO_SWITCH_0, 0);
|
|
rt2x00_set_field32(®, GPIO_SWITCH_1, 0);
|
|
}
|
|
rt2800_register_write(rt2x00dev, GPIO_SWITCH, reg);
|
|
|
|
reg = rt2800_register_read(rt2x00dev, LED_CFG);
|
|
led_g_mode = rt2x00_get_field32(reg, LED_CFG_LED_POLAR) ? 3 : 0;
|
|
led_r_mode = rt2x00_get_field32(reg, LED_CFG_LED_POLAR) ? 0 : 3;
|
|
if (led_g_mode != rt2x00_get_field32(reg, LED_CFG_G_LED_MODE) ||
|
|
led_r_mode != rt2x00_get_field32(reg, LED_CFG_R_LED_MODE)) {
|
|
eeprom = rt2800_eeprom_read(rt2x00dev, EEPROM_FREQ);
|
|
led_ctrl = rt2x00_get_field16(eeprom, EEPROM_FREQ_LED_MODE);
|
|
if (led_ctrl == 0 || led_ctrl > 0x40) {
|
|
rt2x00_set_field32(®, LED_CFG_G_LED_MODE, led_g_mode);
|
|
rt2x00_set_field32(®, LED_CFG_R_LED_MODE, led_r_mode);
|
|
rt2800_register_write(rt2x00dev, LED_CFG, reg);
|
|
} else {
|
|
rt2800_mcu_request(rt2x00dev, MCU_BAND_SELECT, 0xff,
|
|
(led_g_mode << 2) | led_r_mode, 1);
|
|
}
|
|
}
|
|
}
|
|
|
|
static void rt2800_set_ant_diversity(struct rt2x00_dev *rt2x00dev,
|
|
enum antenna ant)
|
|
{
|
|
u32 reg;
|
|
u8 eesk_pin = (ant == ANTENNA_A) ? 1 : 0;
|
|
u8 gpio_bit3 = (ant == ANTENNA_A) ? 0 : 1;
|
|
|
|
if (rt2x00_is_pci(rt2x00dev)) {
|
|
reg = rt2800_register_read(rt2x00dev, E2PROM_CSR);
|
|
rt2x00_set_field32(®, E2PROM_CSR_DATA_CLOCK, eesk_pin);
|
|
rt2800_register_write(rt2x00dev, E2PROM_CSR, reg);
|
|
} else if (rt2x00_is_usb(rt2x00dev))
|
|
rt2800_mcu_request(rt2x00dev, MCU_ANT_SELECT, 0xff,
|
|
eesk_pin, 0);
|
|
|
|
reg = rt2800_register_read(rt2x00dev, GPIO_CTRL);
|
|
rt2x00_set_field32(®, GPIO_CTRL_DIR3, 0);
|
|
rt2x00_set_field32(®, GPIO_CTRL_VAL3, gpio_bit3);
|
|
rt2800_register_write(rt2x00dev, GPIO_CTRL, reg);
|
|
}
|
|
|
|
void rt2800_config_ant(struct rt2x00_dev *rt2x00dev, struct antenna_setup *ant)
|
|
{
|
|
u8 r1;
|
|
u8 r3;
|
|
u16 eeprom;
|
|
|
|
r1 = rt2800_bbp_read(rt2x00dev, 1);
|
|
r3 = rt2800_bbp_read(rt2x00dev, 3);
|
|
|
|
if (rt2x00_rt(rt2x00dev, RT3572) &&
|
|
rt2x00_has_cap_bt_coexist(rt2x00dev))
|
|
rt2800_config_3572bt_ant(rt2x00dev);
|
|
|
|
/*
|
|
* Configure the TX antenna.
|
|
*/
|
|
switch (ant->tx_chain_num) {
|
|
case 1:
|
|
rt2x00_set_field8(&r1, BBP1_TX_ANTENNA, 0);
|
|
break;
|
|
case 2:
|
|
if (rt2x00_rt(rt2x00dev, RT3572) &&
|
|
rt2x00_has_cap_bt_coexist(rt2x00dev))
|
|
rt2x00_set_field8(&r1, BBP1_TX_ANTENNA, 1);
|
|
else
|
|
rt2x00_set_field8(&r1, BBP1_TX_ANTENNA, 2);
|
|
break;
|
|
case 3:
|
|
rt2x00_set_field8(&r1, BBP1_TX_ANTENNA, 2);
|
|
break;
|
|
}
|
|
|
|
/*
|
|
* Configure the RX antenna.
|
|
*/
|
|
switch (ant->rx_chain_num) {
|
|
case 1:
|
|
if (rt2x00_rt(rt2x00dev, RT3070) ||
|
|
rt2x00_rt(rt2x00dev, RT3090) ||
|
|
rt2x00_rt(rt2x00dev, RT3352) ||
|
|
rt2x00_rt(rt2x00dev, RT3390)) {
|
|
eeprom = rt2800_eeprom_read(rt2x00dev,
|
|
EEPROM_NIC_CONF1);
|
|
if (rt2x00_get_field16(eeprom,
|
|
EEPROM_NIC_CONF1_ANT_DIVERSITY))
|
|
rt2800_set_ant_diversity(rt2x00dev,
|
|
rt2x00dev->default_ant.rx);
|
|
}
|
|
rt2x00_set_field8(&r3, BBP3_RX_ANTENNA, 0);
|
|
break;
|
|
case 2:
|
|
if (rt2x00_rt(rt2x00dev, RT3572) &&
|
|
rt2x00_has_cap_bt_coexist(rt2x00dev)) {
|
|
rt2x00_set_field8(&r3, BBP3_RX_ADC, 1);
|
|
rt2x00_set_field8(&r3, BBP3_RX_ANTENNA,
|
|
rt2x00dev->curr_band == NL80211_BAND_5GHZ);
|
|
rt2800_set_ant_diversity(rt2x00dev, ANTENNA_B);
|
|
} else {
|
|
rt2x00_set_field8(&r3, BBP3_RX_ANTENNA, 1);
|
|
}
|
|
break;
|
|
case 3:
|
|
rt2x00_set_field8(&r3, BBP3_RX_ANTENNA, 2);
|
|
break;
|
|
}
|
|
|
|
rt2800_bbp_write(rt2x00dev, 3, r3);
|
|
rt2800_bbp_write(rt2x00dev, 1, r1);
|
|
|
|
if (rt2x00_rt(rt2x00dev, RT3593) ||
|
|
rt2x00_rt(rt2x00dev, RT3883)) {
|
|
if (ant->rx_chain_num == 1)
|
|
rt2800_bbp_write(rt2x00dev, 86, 0x00);
|
|
else
|
|
rt2800_bbp_write(rt2x00dev, 86, 0x46);
|
|
}
|
|
}
|
|
EXPORT_SYMBOL_GPL(rt2800_config_ant);
|
|
|
|
static void rt2800_config_lna_gain(struct rt2x00_dev *rt2x00dev,
|
|
struct rt2x00lib_conf *libconf)
|
|
{
|
|
u16 eeprom;
|
|
short lna_gain;
|
|
|
|
if (libconf->rf.channel <= 14) {
|
|
eeprom = rt2800_eeprom_read(rt2x00dev, EEPROM_LNA);
|
|
lna_gain = rt2x00_get_field16(eeprom, EEPROM_LNA_BG);
|
|
} else if (libconf->rf.channel <= 64) {
|
|
eeprom = rt2800_eeprom_read(rt2x00dev, EEPROM_LNA);
|
|
lna_gain = rt2x00_get_field16(eeprom, EEPROM_LNA_A0);
|
|
} else if (libconf->rf.channel <= 128) {
|
|
if (rt2x00_rt(rt2x00dev, RT3593) ||
|
|
rt2x00_rt(rt2x00dev, RT3883)) {
|
|
eeprom = rt2800_eeprom_read(rt2x00dev, EEPROM_EXT_LNA2);
|
|
lna_gain = rt2x00_get_field16(eeprom,
|
|
EEPROM_EXT_LNA2_A1);
|
|
} else {
|
|
eeprom = rt2800_eeprom_read(rt2x00dev, EEPROM_RSSI_BG2);
|
|
lna_gain = rt2x00_get_field16(eeprom,
|
|
EEPROM_RSSI_BG2_LNA_A1);
|
|
}
|
|
} else {
|
|
if (rt2x00_rt(rt2x00dev, RT3593) ||
|
|
rt2x00_rt(rt2x00dev, RT3883)) {
|
|
eeprom = rt2800_eeprom_read(rt2x00dev, EEPROM_EXT_LNA2);
|
|
lna_gain = rt2x00_get_field16(eeprom,
|
|
EEPROM_EXT_LNA2_A2);
|
|
} else {
|
|
eeprom = rt2800_eeprom_read(rt2x00dev, EEPROM_RSSI_A2);
|
|
lna_gain = rt2x00_get_field16(eeprom,
|
|
EEPROM_RSSI_A2_LNA_A2);
|
|
}
|
|
}
|
|
|
|
rt2x00dev->lna_gain = lna_gain;
|
|
}
|
|
|
|
static inline bool rt2800_clk_is_20mhz(struct rt2x00_dev *rt2x00dev)
|
|
{
|
|
return clk_get_rate(rt2x00dev->clk) == 20000000;
|
|
}
|
|
|
|
#define FREQ_OFFSET_BOUND 0x5f
|
|
|
|
static void rt2800_freq_cal_mode1(struct rt2x00_dev *rt2x00dev)
|
|
{
|
|
u8 freq_offset, prev_freq_offset;
|
|
u8 rfcsr, prev_rfcsr;
|
|
|
|
freq_offset = rt2x00_get_field8(rt2x00dev->freq_offset, RFCSR17_CODE);
|
|
freq_offset = min_t(u8, freq_offset, FREQ_OFFSET_BOUND);
|
|
|
|
rfcsr = rt2800_rfcsr_read(rt2x00dev, 17);
|
|
prev_rfcsr = rfcsr;
|
|
|
|
rt2x00_set_field8(&rfcsr, RFCSR17_CODE, freq_offset);
|
|
if (rfcsr == prev_rfcsr)
|
|
return;
|
|
|
|
if (rt2x00_is_usb(rt2x00dev)) {
|
|
rt2800_mcu_request(rt2x00dev, MCU_FREQ_OFFSET, 0xff,
|
|
freq_offset, prev_rfcsr);
|
|
return;
|
|
}
|
|
|
|
prev_freq_offset = rt2x00_get_field8(prev_rfcsr, RFCSR17_CODE);
|
|
while (prev_freq_offset != freq_offset) {
|
|
if (prev_freq_offset < freq_offset)
|
|
prev_freq_offset++;
|
|
else
|
|
prev_freq_offset--;
|
|
|
|
rt2x00_set_field8(&rfcsr, RFCSR17_CODE, prev_freq_offset);
|
|
rt2800_rfcsr_write(rt2x00dev, 17, rfcsr);
|
|
|
|
usleep_range(1000, 1500);
|
|
}
|
|
}
|
|
|
|
static void rt2800_config_channel_rf2xxx(struct rt2x00_dev *rt2x00dev,
|
|
struct ieee80211_conf *conf,
|
|
struct rf_channel *rf,
|
|
struct channel_info *info)
|
|
{
|
|
rt2x00_set_field32(&rf->rf4, RF4_FREQ_OFFSET, rt2x00dev->freq_offset);
|
|
|
|
if (rt2x00dev->default_ant.tx_chain_num == 1)
|
|
rt2x00_set_field32(&rf->rf2, RF2_ANTENNA_TX1, 1);
|
|
|
|
if (rt2x00dev->default_ant.rx_chain_num == 1) {
|
|
rt2x00_set_field32(&rf->rf2, RF2_ANTENNA_RX1, 1);
|
|
rt2x00_set_field32(&rf->rf2, RF2_ANTENNA_RX2, 1);
|
|
} else if (rt2x00dev->default_ant.rx_chain_num == 2)
|
|
rt2x00_set_field32(&rf->rf2, RF2_ANTENNA_RX2, 1);
|
|
|
|
if (rf->channel > 14) {
|
|
/*
|
|
* When TX power is below 0, we should increase it by 7 to
|
|
* make it a positive value (Minimum value is -7).
|
|
* However this means that values between 0 and 7 have
|
|
* double meaning, and we should set a 7DBm boost flag.
|
|
*/
|
|
rt2x00_set_field32(&rf->rf3, RF3_TXPOWER_A_7DBM_BOOST,
|
|
(info->default_power1 >= 0));
|
|
|
|
if (info->default_power1 < 0)
|
|
info->default_power1 += 7;
|
|
|
|
rt2x00_set_field32(&rf->rf3, RF3_TXPOWER_A, info->default_power1);
|
|
|
|
rt2x00_set_field32(&rf->rf4, RF4_TXPOWER_A_7DBM_BOOST,
|
|
(info->default_power2 >= 0));
|
|
|
|
if (info->default_power2 < 0)
|
|
info->default_power2 += 7;
|
|
|
|
rt2x00_set_field32(&rf->rf4, RF4_TXPOWER_A, info->default_power2);
|
|
} else {
|
|
rt2x00_set_field32(&rf->rf3, RF3_TXPOWER_G, info->default_power1);
|
|
rt2x00_set_field32(&rf->rf4, RF4_TXPOWER_G, info->default_power2);
|
|
}
|
|
|
|
rt2x00_set_field32(&rf->rf4, RF4_HT40, conf_is_ht40(conf));
|
|
|
|
rt2800_rf_write(rt2x00dev, 1, rf->rf1);
|
|
rt2800_rf_write(rt2x00dev, 2, rf->rf2);
|
|
rt2800_rf_write(rt2x00dev, 3, rf->rf3 & ~0x00000004);
|
|
rt2800_rf_write(rt2x00dev, 4, rf->rf4);
|
|
|
|
udelay(200);
|
|
|
|
rt2800_rf_write(rt2x00dev, 1, rf->rf1);
|
|
rt2800_rf_write(rt2x00dev, 2, rf->rf2);
|
|
rt2800_rf_write(rt2x00dev, 3, rf->rf3 | 0x00000004);
|
|
rt2800_rf_write(rt2x00dev, 4, rf->rf4);
|
|
|
|
udelay(200);
|
|
|
|
rt2800_rf_write(rt2x00dev, 1, rf->rf1);
|
|
rt2800_rf_write(rt2x00dev, 2, rf->rf2);
|
|
rt2800_rf_write(rt2x00dev, 3, rf->rf3 & ~0x00000004);
|
|
rt2800_rf_write(rt2x00dev, 4, rf->rf4);
|
|
}
|
|
|
|
static void rt2800_config_channel_rf3xxx(struct rt2x00_dev *rt2x00dev,
|
|
struct ieee80211_conf *conf,
|
|
struct rf_channel *rf,
|
|
struct channel_info *info)
|
|
{
|
|
struct rt2800_drv_data *drv_data = rt2x00dev->drv_data;
|
|
u8 rfcsr, calib_tx, calib_rx;
|
|
|
|
rt2800_rfcsr_write(rt2x00dev, 2, rf->rf1);
|
|
|
|
rfcsr = rt2800_rfcsr_read(rt2x00dev, 3);
|
|
rt2x00_set_field8(&rfcsr, RFCSR3_K, rf->rf3);
|
|
rt2800_rfcsr_write(rt2x00dev, 3, rfcsr);
|
|
|
|
rfcsr = rt2800_rfcsr_read(rt2x00dev, 6);
|
|
rt2x00_set_field8(&rfcsr, RFCSR6_R1, rf->rf2);
|
|
rt2800_rfcsr_write(rt2x00dev, 6, rfcsr);
|
|
|
|
rfcsr = rt2800_rfcsr_read(rt2x00dev, 12);
|
|
rt2x00_set_field8(&rfcsr, RFCSR12_TX_POWER, info->default_power1);
|
|
rt2800_rfcsr_write(rt2x00dev, 12, rfcsr);
|
|
|
|
rfcsr = rt2800_rfcsr_read(rt2x00dev, 13);
|
|
rt2x00_set_field8(&rfcsr, RFCSR13_TX_POWER, info->default_power2);
|
|
rt2800_rfcsr_write(rt2x00dev, 13, rfcsr);
|
|
|
|
rfcsr = rt2800_rfcsr_read(rt2x00dev, 1);
|
|
rt2x00_set_field8(&rfcsr, RFCSR1_RX0_PD, 0);
|
|
rt2x00_set_field8(&rfcsr, RFCSR1_RX1_PD,
|
|
rt2x00dev->default_ant.rx_chain_num <= 1);
|
|
rt2x00_set_field8(&rfcsr, RFCSR1_RX2_PD,
|
|
rt2x00dev->default_ant.rx_chain_num <= 2);
|
|
rt2x00_set_field8(&rfcsr, RFCSR1_TX0_PD, 0);
|
|
rt2x00_set_field8(&rfcsr, RFCSR1_TX1_PD,
|
|
rt2x00dev->default_ant.tx_chain_num <= 1);
|
|
rt2x00_set_field8(&rfcsr, RFCSR1_TX2_PD,
|
|
rt2x00dev->default_ant.tx_chain_num <= 2);
|
|
rt2800_rfcsr_write(rt2x00dev, 1, rfcsr);
|
|
|
|
rfcsr = rt2800_rfcsr_read(rt2x00dev, 23);
|
|
rt2x00_set_field8(&rfcsr, RFCSR23_FREQ_OFFSET, rt2x00dev->freq_offset);
|
|
rt2800_rfcsr_write(rt2x00dev, 23, rfcsr);
|
|
|
|
if (rt2x00_rt(rt2x00dev, RT3390)) {
|
|
calib_tx = conf_is_ht40(conf) ? 0x68 : 0x4f;
|
|
calib_rx = conf_is_ht40(conf) ? 0x6f : 0x4f;
|
|
} else {
|
|
if (conf_is_ht40(conf)) {
|
|
calib_tx = drv_data->calibration_bw40;
|
|
calib_rx = drv_data->calibration_bw40;
|
|
} else {
|
|
calib_tx = drv_data->calibration_bw20;
|
|
calib_rx = drv_data->calibration_bw20;
|
|
}
|
|
}
|
|
|
|
rfcsr = rt2800_rfcsr_read(rt2x00dev, 24);
|
|
rt2x00_set_field8(&rfcsr, RFCSR24_TX_CALIB, calib_tx);
|
|
rt2800_rfcsr_write(rt2x00dev, 24, rfcsr);
|
|
|
|
rfcsr = rt2800_rfcsr_read(rt2x00dev, 31);
|
|
rt2x00_set_field8(&rfcsr, RFCSR31_RX_CALIB, calib_rx);
|
|
rt2800_rfcsr_write(rt2x00dev, 31, rfcsr);
|
|
|
|
rfcsr = rt2800_rfcsr_read(rt2x00dev, 7);
|
|
rt2x00_set_field8(&rfcsr, RFCSR7_RF_TUNING, 1);
|
|
rt2800_rfcsr_write(rt2x00dev, 7, rfcsr);
|
|
|
|
rfcsr = rt2800_rfcsr_read(rt2x00dev, 30);
|
|
rt2x00_set_field8(&rfcsr, RFCSR30_RF_CALIBRATION, 1);
|
|
rt2800_rfcsr_write(rt2x00dev, 30, rfcsr);
|
|
|
|
usleep_range(1000, 1500);
|
|
|
|
rt2x00_set_field8(&rfcsr, RFCSR30_RF_CALIBRATION, 0);
|
|
rt2800_rfcsr_write(rt2x00dev, 30, rfcsr);
|
|
}
|
|
|
|
static void rt2800_config_channel_rf3052(struct rt2x00_dev *rt2x00dev,
|
|
struct ieee80211_conf *conf,
|
|
struct rf_channel *rf,
|
|
struct channel_info *info)
|
|
{
|
|
struct rt2800_drv_data *drv_data = rt2x00dev->drv_data;
|
|
u8 rfcsr;
|
|
u32 reg;
|
|
|
|
if (rf->channel <= 14) {
|
|
rt2800_bbp_write(rt2x00dev, 25, drv_data->bbp25);
|
|
rt2800_bbp_write(rt2x00dev, 26, drv_data->bbp26);
|
|
} else {
|
|
rt2800_bbp_write(rt2x00dev, 25, 0x09);
|
|
rt2800_bbp_write(rt2x00dev, 26, 0xff);
|
|
}
|
|
|
|
rt2800_rfcsr_write(rt2x00dev, 2, rf->rf1);
|
|
rt2800_rfcsr_write(rt2x00dev, 3, rf->rf3);
|
|
|
|
rfcsr = rt2800_rfcsr_read(rt2x00dev, 6);
|
|
rt2x00_set_field8(&rfcsr, RFCSR6_R1, rf->rf2);
|
|
if (rf->channel <= 14)
|
|
rt2x00_set_field8(&rfcsr, RFCSR6_TXDIV, 2);
|
|
else
|
|
rt2x00_set_field8(&rfcsr, RFCSR6_TXDIV, 1);
|
|
rt2800_rfcsr_write(rt2x00dev, 6, rfcsr);
|
|
|
|
rfcsr = rt2800_rfcsr_read(rt2x00dev, 5);
|
|
if (rf->channel <= 14)
|
|
rt2x00_set_field8(&rfcsr, RFCSR5_R1, 1);
|
|
else
|
|
rt2x00_set_field8(&rfcsr, RFCSR5_R1, 2);
|
|
rt2800_rfcsr_write(rt2x00dev, 5, rfcsr);
|
|
|
|
rfcsr = rt2800_rfcsr_read(rt2x00dev, 12);
|
|
if (rf->channel <= 14) {
|
|
rt2x00_set_field8(&rfcsr, RFCSR12_DR0, 3);
|
|
rt2x00_set_field8(&rfcsr, RFCSR12_TX_POWER,
|
|
info->default_power1);
|
|
} else {
|
|
rt2x00_set_field8(&rfcsr, RFCSR12_DR0, 7);
|
|
rt2x00_set_field8(&rfcsr, RFCSR12_TX_POWER,
|
|
(info->default_power1 & 0x3) |
|
|
((info->default_power1 & 0xC) << 1));
|
|
}
|
|
rt2800_rfcsr_write(rt2x00dev, 12, rfcsr);
|
|
|
|
rfcsr = rt2800_rfcsr_read(rt2x00dev, 13);
|
|
if (rf->channel <= 14) {
|
|
rt2x00_set_field8(&rfcsr, RFCSR13_DR0, 3);
|
|
rt2x00_set_field8(&rfcsr, RFCSR13_TX_POWER,
|
|
info->default_power2);
|
|
} else {
|
|
rt2x00_set_field8(&rfcsr, RFCSR13_DR0, 7);
|
|
rt2x00_set_field8(&rfcsr, RFCSR13_TX_POWER,
|
|
(info->default_power2 & 0x3) |
|
|
((info->default_power2 & 0xC) << 1));
|
|
}
|
|
rt2800_rfcsr_write(rt2x00dev, 13, rfcsr);
|
|
|
|
rfcsr = rt2800_rfcsr_read(rt2x00dev, 1);
|
|
rt2x00_set_field8(&rfcsr, RFCSR1_RX0_PD, 0);
|
|
rt2x00_set_field8(&rfcsr, RFCSR1_TX0_PD, 0);
|
|
rt2x00_set_field8(&rfcsr, RFCSR1_RX1_PD, 0);
|
|
rt2x00_set_field8(&rfcsr, RFCSR1_TX1_PD, 0);
|
|
rt2x00_set_field8(&rfcsr, RFCSR1_RX2_PD, 0);
|
|
rt2x00_set_field8(&rfcsr, RFCSR1_TX2_PD, 0);
|
|
if (rt2x00_has_cap_bt_coexist(rt2x00dev)) {
|
|
if (rf->channel <= 14) {
|
|
rt2x00_set_field8(&rfcsr, RFCSR1_RX0_PD, 1);
|
|
rt2x00_set_field8(&rfcsr, RFCSR1_TX0_PD, 1);
|
|
}
|
|
rt2x00_set_field8(&rfcsr, RFCSR1_RX2_PD, 1);
|
|
rt2x00_set_field8(&rfcsr, RFCSR1_TX2_PD, 1);
|
|
} else {
|
|
switch (rt2x00dev->default_ant.tx_chain_num) {
|
|
case 1:
|
|
rt2x00_set_field8(&rfcsr, RFCSR1_TX1_PD, 1);
|
|
fallthrough;
|
|
case 2:
|
|
rt2x00_set_field8(&rfcsr, RFCSR1_TX2_PD, 1);
|
|
break;
|
|
}
|
|
|
|
switch (rt2x00dev->default_ant.rx_chain_num) {
|
|
case 1:
|
|
rt2x00_set_field8(&rfcsr, RFCSR1_RX1_PD, 1);
|
|
fallthrough;
|
|
case 2:
|
|
rt2x00_set_field8(&rfcsr, RFCSR1_RX2_PD, 1);
|
|
break;
|
|
}
|
|
}
|
|
rt2800_rfcsr_write(rt2x00dev, 1, rfcsr);
|
|
|
|
rfcsr = rt2800_rfcsr_read(rt2x00dev, 23);
|
|
rt2x00_set_field8(&rfcsr, RFCSR23_FREQ_OFFSET, rt2x00dev->freq_offset);
|
|
rt2800_rfcsr_write(rt2x00dev, 23, rfcsr);
|
|
|
|
if (conf_is_ht40(conf)) {
|
|
rt2800_rfcsr_write(rt2x00dev, 24, drv_data->calibration_bw40);
|
|
rt2800_rfcsr_write(rt2x00dev, 31, drv_data->calibration_bw40);
|
|
} else {
|
|
rt2800_rfcsr_write(rt2x00dev, 24, drv_data->calibration_bw20);
|
|
rt2800_rfcsr_write(rt2x00dev, 31, drv_data->calibration_bw20);
|
|
}
|
|
|
|
if (rf->channel <= 14) {
|
|
rt2800_rfcsr_write(rt2x00dev, 7, 0xd8);
|
|
rt2800_rfcsr_write(rt2x00dev, 9, 0xc3);
|
|
rt2800_rfcsr_write(rt2x00dev, 10, 0xf1);
|
|
rt2800_rfcsr_write(rt2x00dev, 11, 0xb9);
|
|
rt2800_rfcsr_write(rt2x00dev, 15, 0x53);
|
|
rfcsr = 0x4c;
|
|
rt2x00_set_field8(&rfcsr, RFCSR16_TXMIXER_GAIN,
|
|
drv_data->txmixer_gain_24g);
|
|
rt2800_rfcsr_write(rt2x00dev, 16, rfcsr);
|
|
rt2800_rfcsr_write(rt2x00dev, 17, 0x23);
|
|
rt2800_rfcsr_write(rt2x00dev, 19, 0x93);
|
|
rt2800_rfcsr_write(rt2x00dev, 20, 0xb3);
|
|
rt2800_rfcsr_write(rt2x00dev, 25, 0x15);
|
|
rt2800_rfcsr_write(rt2x00dev, 26, 0x85);
|
|
rt2800_rfcsr_write(rt2x00dev, 27, 0x00);
|
|
rt2800_rfcsr_write(rt2x00dev, 29, 0x9b);
|
|
} else {
|
|
rfcsr = rt2800_rfcsr_read(rt2x00dev, 7);
|
|
rt2x00_set_field8(&rfcsr, RFCSR7_BIT2, 1);
|
|
rt2x00_set_field8(&rfcsr, RFCSR7_BIT3, 0);
|
|
rt2x00_set_field8(&rfcsr, RFCSR7_BIT4, 1);
|
|
rt2x00_set_field8(&rfcsr, RFCSR7_BITS67, 0);
|
|
rt2800_rfcsr_write(rt2x00dev, 7, rfcsr);
|
|
rt2800_rfcsr_write(rt2x00dev, 9, 0xc0);
|
|
rt2800_rfcsr_write(rt2x00dev, 10, 0xf1);
|
|
rt2800_rfcsr_write(rt2x00dev, 11, 0x00);
|
|
rt2800_rfcsr_write(rt2x00dev, 15, 0x43);
|
|
rfcsr = 0x7a;
|
|
rt2x00_set_field8(&rfcsr, RFCSR16_TXMIXER_GAIN,
|
|
drv_data->txmixer_gain_5g);
|
|
rt2800_rfcsr_write(rt2x00dev, 16, rfcsr);
|
|
rt2800_rfcsr_write(rt2x00dev, 17, 0x23);
|
|
if (rf->channel <= 64) {
|
|
rt2800_rfcsr_write(rt2x00dev, 19, 0xb7);
|
|
rt2800_rfcsr_write(rt2x00dev, 20, 0xf6);
|
|
rt2800_rfcsr_write(rt2x00dev, 25, 0x3d);
|
|
} else if (rf->channel <= 128) {
|
|
rt2800_rfcsr_write(rt2x00dev, 19, 0x74);
|
|
rt2800_rfcsr_write(rt2x00dev, 20, 0xf4);
|
|
rt2800_rfcsr_write(rt2x00dev, 25, 0x01);
|
|
} else {
|
|
rt2800_rfcsr_write(rt2x00dev, 19, 0x72);
|
|
rt2800_rfcsr_write(rt2x00dev, 20, 0xf3);
|
|
rt2800_rfcsr_write(rt2x00dev, 25, 0x01);
|
|
}
|
|
rt2800_rfcsr_write(rt2x00dev, 26, 0x87);
|
|
rt2800_rfcsr_write(rt2x00dev, 27, 0x01);
|
|
rt2800_rfcsr_write(rt2x00dev, 29, 0x9f);
|
|
}
|
|
|
|
reg = rt2800_register_read(rt2x00dev, GPIO_CTRL);
|
|
rt2x00_set_field32(®, GPIO_CTRL_DIR7, 0);
|
|
if (rf->channel <= 14)
|
|
rt2x00_set_field32(®, GPIO_CTRL_VAL7, 1);
|
|
else
|
|
rt2x00_set_field32(®, GPIO_CTRL_VAL7, 0);
|
|
rt2800_register_write(rt2x00dev, GPIO_CTRL, reg);
|
|
|
|
rfcsr = rt2800_rfcsr_read(rt2x00dev, 7);
|
|
rt2x00_set_field8(&rfcsr, RFCSR7_RF_TUNING, 1);
|
|
rt2800_rfcsr_write(rt2x00dev, 7, rfcsr);
|
|
}
|
|
|
|
static void rt2800_config_channel_rf3053(struct rt2x00_dev *rt2x00dev,
|
|
struct ieee80211_conf *conf,
|
|
struct rf_channel *rf,
|
|
struct channel_info *info)
|
|
{
|
|
struct rt2800_drv_data *drv_data = rt2x00dev->drv_data;
|
|
u8 txrx_agc_fc;
|
|
u8 txrx_h20m;
|
|
u8 rfcsr;
|
|
u8 bbp;
|
|
const bool txbf_enabled = false; /* TODO */
|
|
|
|
/* TODO: use TX{0,1,2}FinePowerControl values from EEPROM */
|
|
bbp = rt2800_bbp_read(rt2x00dev, 109);
|
|
rt2x00_set_field8(&bbp, BBP109_TX0_POWER, 0);
|
|
rt2x00_set_field8(&bbp, BBP109_TX1_POWER, 0);
|
|
rt2800_bbp_write(rt2x00dev, 109, bbp);
|
|
|
|
bbp = rt2800_bbp_read(rt2x00dev, 110);
|
|
rt2x00_set_field8(&bbp, BBP110_TX2_POWER, 0);
|
|
rt2800_bbp_write(rt2x00dev, 110, bbp);
|
|
|
|
if (rf->channel <= 14) {
|
|
/* Restore BBP 25 & 26 for 2.4 GHz */
|
|
rt2800_bbp_write(rt2x00dev, 25, drv_data->bbp25);
|
|
rt2800_bbp_write(rt2x00dev, 26, drv_data->bbp26);
|
|
} else {
|
|
/* Hard code BBP 25 & 26 for 5GHz */
|
|
|
|
/* Enable IQ Phase correction */
|
|
rt2800_bbp_write(rt2x00dev, 25, 0x09);
|
|
/* Setup IQ Phase correction value */
|
|
rt2800_bbp_write(rt2x00dev, 26, 0xff);
|
|
}
|
|
|
|
rt2800_rfcsr_write(rt2x00dev, 8, rf->rf1);
|
|
rt2800_rfcsr_write(rt2x00dev, 9, rf->rf3 & 0xf);
|
|
|
|
rfcsr = rt2800_rfcsr_read(rt2x00dev, 11);
|
|
rt2x00_set_field8(&rfcsr, RFCSR11_R, (rf->rf2 & 0x3));
|
|
rt2800_rfcsr_write(rt2x00dev, 11, rfcsr);
|
|
|
|
rfcsr = rt2800_rfcsr_read(rt2x00dev, 11);
|
|
rt2x00_set_field8(&rfcsr, RFCSR11_PLL_IDOH, 1);
|
|
if (rf->channel <= 14)
|
|
rt2x00_set_field8(&rfcsr, RFCSR11_PLL_MOD, 1);
|
|
else
|
|
rt2x00_set_field8(&rfcsr, RFCSR11_PLL_MOD, 2);
|
|
rt2800_rfcsr_write(rt2x00dev, 11, rfcsr);
|
|
|
|
rfcsr = rt2800_rfcsr_read(rt2x00dev, 53);
|
|
if (rf->channel <= 14) {
|
|
rfcsr = 0;
|
|
rt2x00_set_field8(&rfcsr, RFCSR53_TX_POWER,
|
|
info->default_power1 & 0x1f);
|
|
} else {
|
|
if (rt2x00_is_usb(rt2x00dev))
|
|
rfcsr = 0x40;
|
|
|
|
rt2x00_set_field8(&rfcsr, RFCSR53_TX_POWER,
|
|
((info->default_power1 & 0x18) << 1) |
|
|
(info->default_power1 & 7));
|
|
}
|
|
rt2800_rfcsr_write(rt2x00dev, 53, rfcsr);
|
|
|
|
rfcsr = rt2800_rfcsr_read(rt2x00dev, 55);
|
|
if (rf->channel <= 14) {
|
|
rfcsr = 0;
|
|
rt2x00_set_field8(&rfcsr, RFCSR55_TX_POWER,
|
|
info->default_power2 & 0x1f);
|
|
} else {
|
|
if (rt2x00_is_usb(rt2x00dev))
|
|
rfcsr = 0x40;
|
|
|
|
rt2x00_set_field8(&rfcsr, RFCSR55_TX_POWER,
|
|
((info->default_power2 & 0x18) << 1) |
|
|
(info->default_power2 & 7));
|
|
}
|
|
rt2800_rfcsr_write(rt2x00dev, 55, rfcsr);
|
|
|
|
rfcsr = rt2800_rfcsr_read(rt2x00dev, 54);
|
|
if (rf->channel <= 14) {
|
|
rfcsr = 0;
|
|
rt2x00_set_field8(&rfcsr, RFCSR54_TX_POWER,
|
|
info->default_power3 & 0x1f);
|
|
} else {
|
|
if (rt2x00_is_usb(rt2x00dev))
|
|
rfcsr = 0x40;
|
|
|
|
rt2x00_set_field8(&rfcsr, RFCSR54_TX_POWER,
|
|
((info->default_power3 & 0x18) << 1) |
|
|
(info->default_power3 & 7));
|
|
}
|
|
rt2800_rfcsr_write(rt2x00dev, 54, rfcsr);
|
|
|
|
rfcsr = rt2800_rfcsr_read(rt2x00dev, 1);
|
|
rt2x00_set_field8(&rfcsr, RFCSR1_RX0_PD, 0);
|
|
rt2x00_set_field8(&rfcsr, RFCSR1_TX0_PD, 0);
|
|
rt2x00_set_field8(&rfcsr, RFCSR1_RX1_PD, 0);
|
|
rt2x00_set_field8(&rfcsr, RFCSR1_TX1_PD, 0);
|
|
rt2x00_set_field8(&rfcsr, RFCSR1_RX2_PD, 0);
|
|
rt2x00_set_field8(&rfcsr, RFCSR1_TX2_PD, 0);
|
|
rt2x00_set_field8(&rfcsr, RFCSR1_RF_BLOCK_EN, 1);
|
|
rt2x00_set_field8(&rfcsr, RFCSR1_PLL_PD, 1);
|
|
|
|
switch (rt2x00dev->default_ant.tx_chain_num) {
|
|
case 3:
|
|
rt2x00_set_field8(&rfcsr, RFCSR1_TX2_PD, 1);
|
|
fallthrough;
|
|
case 2:
|
|
rt2x00_set_field8(&rfcsr, RFCSR1_TX1_PD, 1);
|
|
fallthrough;
|
|
case 1:
|
|
rt2x00_set_field8(&rfcsr, RFCSR1_TX0_PD, 1);
|
|
break;
|
|
}
|
|
|
|
switch (rt2x00dev->default_ant.rx_chain_num) {
|
|
case 3:
|
|
rt2x00_set_field8(&rfcsr, RFCSR1_RX2_PD, 1);
|
|
fallthrough;
|
|
case 2:
|
|
rt2x00_set_field8(&rfcsr, RFCSR1_RX1_PD, 1);
|
|
fallthrough;
|
|
case 1:
|
|
rt2x00_set_field8(&rfcsr, RFCSR1_RX0_PD, 1);
|
|
break;
|
|
}
|
|
rt2800_rfcsr_write(rt2x00dev, 1, rfcsr);
|
|
|
|
rt2800_freq_cal_mode1(rt2x00dev);
|
|
|
|
if (conf_is_ht40(conf)) {
|
|
txrx_agc_fc = rt2x00_get_field8(drv_data->calibration_bw40,
|
|
RFCSR24_TX_AGC_FC);
|
|
txrx_h20m = rt2x00_get_field8(drv_data->calibration_bw40,
|
|
RFCSR24_TX_H20M);
|
|
} else {
|
|
txrx_agc_fc = rt2x00_get_field8(drv_data->calibration_bw20,
|
|
RFCSR24_TX_AGC_FC);
|
|
txrx_h20m = rt2x00_get_field8(drv_data->calibration_bw20,
|
|
RFCSR24_TX_H20M);
|
|
}
|
|
|
|
/* NOTE: the reference driver does not writes the new value
|
|
* back to RFCSR 32
|
|
*/
|
|
rfcsr = rt2800_rfcsr_read(rt2x00dev, 32);
|
|
rt2x00_set_field8(&rfcsr, RFCSR32_TX_AGC_FC, txrx_agc_fc);
|
|
|
|
if (rf->channel <= 14)
|
|
rfcsr = 0xa0;
|
|
else
|
|
rfcsr = 0x80;
|
|
rt2800_rfcsr_write(rt2x00dev, 31, rfcsr);
|
|
|
|
rfcsr = rt2800_rfcsr_read(rt2x00dev, 30);
|
|
rt2x00_set_field8(&rfcsr, RFCSR30_TX_H20M, txrx_h20m);
|
|
rt2x00_set_field8(&rfcsr, RFCSR30_RX_H20M, txrx_h20m);
|
|
rt2800_rfcsr_write(rt2x00dev, 30, rfcsr);
|
|
|
|
/* Band selection */
|
|
rfcsr = rt2800_rfcsr_read(rt2x00dev, 36);
|
|
if (rf->channel <= 14)
|
|
rt2x00_set_field8(&rfcsr, RFCSR36_RF_BS, 1);
|
|
else
|
|
rt2x00_set_field8(&rfcsr, RFCSR36_RF_BS, 0);
|
|
rt2800_rfcsr_write(rt2x00dev, 36, rfcsr);
|
|
|
|
rfcsr = rt2800_rfcsr_read(rt2x00dev, 34);
|
|
if (rf->channel <= 14)
|
|
rfcsr = 0x3c;
|
|
else
|
|
rfcsr = 0x20;
|
|
rt2800_rfcsr_write(rt2x00dev, 34, rfcsr);
|
|
|
|
rfcsr = rt2800_rfcsr_read(rt2x00dev, 12);
|
|
if (rf->channel <= 14)
|
|
rfcsr = 0x1a;
|
|
else
|
|
rfcsr = 0x12;
|
|
rt2800_rfcsr_write(rt2x00dev, 12, rfcsr);
|
|
|
|
rfcsr = rt2800_rfcsr_read(rt2x00dev, 6);
|
|
if (rf->channel >= 1 && rf->channel <= 14)
|
|
rt2x00_set_field8(&rfcsr, RFCSR6_VCO_IC, 1);
|
|
else if (rf->channel >= 36 && rf->channel <= 64)
|
|
rt2x00_set_field8(&rfcsr, RFCSR6_VCO_IC, 2);
|
|
else if (rf->channel >= 100 && rf->channel <= 128)
|
|
rt2x00_set_field8(&rfcsr, RFCSR6_VCO_IC, 2);
|
|
else
|
|
rt2x00_set_field8(&rfcsr, RFCSR6_VCO_IC, 1);
|
|
rt2800_rfcsr_write(rt2x00dev, 6, rfcsr);
|
|
|
|
rfcsr = rt2800_rfcsr_read(rt2x00dev, 30);
|
|
rt2x00_set_field8(&rfcsr, RFCSR30_RX_VCM, 2);
|
|
rt2800_rfcsr_write(rt2x00dev, 30, rfcsr);
|
|
|
|
rt2800_rfcsr_write(rt2x00dev, 46, 0x60);
|
|
|
|
if (rf->channel <= 14) {
|
|
rt2800_rfcsr_write(rt2x00dev, 10, 0xd3);
|
|
rt2800_rfcsr_write(rt2x00dev, 13, 0x12);
|
|
} else {
|
|
rt2800_rfcsr_write(rt2x00dev, 10, 0xd8);
|
|
rt2800_rfcsr_write(rt2x00dev, 13, 0x23);
|
|
}
|
|
|
|
rfcsr = rt2800_rfcsr_read(rt2x00dev, 51);
|
|
rt2x00_set_field8(&rfcsr, RFCSR51_BITS01, 1);
|
|
rt2800_rfcsr_write(rt2x00dev, 51, rfcsr);
|
|
|
|
rfcsr = rt2800_rfcsr_read(rt2x00dev, 51);
|
|
if (rf->channel <= 14) {
|
|
rt2x00_set_field8(&rfcsr, RFCSR51_BITS24, 5);
|
|
rt2x00_set_field8(&rfcsr, RFCSR51_BITS57, 3);
|
|
} else {
|
|
rt2x00_set_field8(&rfcsr, RFCSR51_BITS24, 4);
|
|
rt2x00_set_field8(&rfcsr, RFCSR51_BITS57, 2);
|
|
}
|
|
rt2800_rfcsr_write(rt2x00dev, 51, rfcsr);
|
|
|
|
rfcsr = rt2800_rfcsr_read(rt2x00dev, 49);
|
|
if (rf->channel <= 14)
|
|
rt2x00_set_field8(&rfcsr, RFCSR49_TX_LO1_IC, 3);
|
|
else
|
|
rt2x00_set_field8(&rfcsr, RFCSR49_TX_LO1_IC, 2);
|
|
|
|
if (txbf_enabled)
|
|
rt2x00_set_field8(&rfcsr, RFCSR49_TX_DIV, 1);
|
|
|
|
rt2800_rfcsr_write(rt2x00dev, 49, rfcsr);
|
|
|
|
rfcsr = rt2800_rfcsr_read(rt2x00dev, 50);
|
|
rt2x00_set_field8(&rfcsr, RFCSR50_TX_LO1_EN, 0);
|
|
rt2800_rfcsr_write(rt2x00dev, 50, rfcsr);
|
|
|
|
rfcsr = rt2800_rfcsr_read(rt2x00dev, 57);
|
|
if (rf->channel <= 14)
|
|
rt2x00_set_field8(&rfcsr, RFCSR57_DRV_CC, 0x1b);
|
|
else
|
|
rt2x00_set_field8(&rfcsr, RFCSR57_DRV_CC, 0x0f);
|
|
rt2800_rfcsr_write(rt2x00dev, 57, rfcsr);
|
|
|
|
if (rf->channel <= 14) {
|
|
rt2800_rfcsr_write(rt2x00dev, 44, 0x93);
|
|
rt2800_rfcsr_write(rt2x00dev, 52, 0x45);
|
|
} else {
|
|
rt2800_rfcsr_write(rt2x00dev, 44, 0x9b);
|
|
rt2800_rfcsr_write(rt2x00dev, 52, 0x05);
|
|
}
|
|
|
|
/* Initiate VCO calibration */
|
|
rfcsr = rt2800_rfcsr_read(rt2x00dev, 3);
|
|
if (rf->channel <= 14) {
|
|
rt2x00_set_field8(&rfcsr, RFCSR3_VCOCAL_EN, 1);
|
|
} else {
|
|
rt2x00_set_field8(&rfcsr, RFCSR3_BIT1, 1);
|
|
rt2x00_set_field8(&rfcsr, RFCSR3_BIT2, 1);
|
|
rt2x00_set_field8(&rfcsr, RFCSR3_BIT3, 1);
|
|
rt2x00_set_field8(&rfcsr, RFCSR3_BIT4, 1);
|
|
rt2x00_set_field8(&rfcsr, RFCSR3_BIT5, 1);
|
|
rt2x00_set_field8(&rfcsr, RFCSR3_VCOCAL_EN, 1);
|
|
}
|
|
rt2800_rfcsr_write(rt2x00dev, 3, rfcsr);
|
|
|
|
if (rf->channel >= 1 && rf->channel <= 14) {
|
|
rfcsr = 0x23;
|
|
if (txbf_enabled)
|
|
rt2x00_set_field8(&rfcsr, RFCSR39_RX_DIV, 1);
|
|
rt2800_rfcsr_write(rt2x00dev, 39, rfcsr);
|
|
|
|
rt2800_rfcsr_write(rt2x00dev, 45, 0xbb);
|
|
} else if (rf->channel >= 36 && rf->channel <= 64) {
|
|
rfcsr = 0x36;
|
|
if (txbf_enabled)
|
|
rt2x00_set_field8(&rfcsr, RFCSR39_RX_DIV, 1);
|
|
rt2800_rfcsr_write(rt2x00dev, 39, 0x36);
|
|
|
|
rt2800_rfcsr_write(rt2x00dev, 45, 0xeb);
|
|
} else if (rf->channel >= 100 && rf->channel <= 128) {
|
|
rfcsr = 0x32;
|
|
if (txbf_enabled)
|
|
rt2x00_set_field8(&rfcsr, RFCSR39_RX_DIV, 1);
|
|
rt2800_rfcsr_write(rt2x00dev, 39, rfcsr);
|
|
|
|
rt2800_rfcsr_write(rt2x00dev, 45, 0xb3);
|
|
} else {
|
|
rfcsr = 0x30;
|
|
if (txbf_enabled)
|
|
rt2x00_set_field8(&rfcsr, RFCSR39_RX_DIV, 1);
|
|
rt2800_rfcsr_write(rt2x00dev, 39, rfcsr);
|
|
|
|
rt2800_rfcsr_write(rt2x00dev, 45, 0x9b);
|
|
}
|
|
}
|
|
|
|
static void rt2800_config_channel_rf3853(struct rt2x00_dev *rt2x00dev,
|
|
struct ieee80211_conf *conf,
|
|
struct rf_channel *rf,
|
|
struct channel_info *info)
|
|
{
|
|
u8 rfcsr;
|
|
u8 bbp;
|
|
u8 pwr1, pwr2, pwr3;
|
|
|
|
const bool txbf_enabled = false; /* TODO */
|
|
|
|
/* TODO: add band selection */
|
|
|
|
if (rf->channel <= 14)
|
|
rt2800_rfcsr_write(rt2x00dev, 6, 0x40);
|
|
else if (rf->channel < 132)
|
|
rt2800_rfcsr_write(rt2x00dev, 6, 0x80);
|
|
else
|
|
rt2800_rfcsr_write(rt2x00dev, 6, 0x40);
|
|
|
|
rt2800_rfcsr_write(rt2x00dev, 8, rf->rf1);
|
|
rt2800_rfcsr_write(rt2x00dev, 9, rf->rf3);
|
|
|
|
if (rf->channel <= 14)
|
|
rt2800_rfcsr_write(rt2x00dev, 11, 0x46);
|
|
else
|
|
rt2800_rfcsr_write(rt2x00dev, 11, 0x48);
|
|
|
|
if (rf->channel <= 14)
|
|
rt2800_rfcsr_write(rt2x00dev, 12, 0x1a);
|
|
else
|
|
rt2800_rfcsr_write(rt2x00dev, 12, 0x52);
|
|
|
|
rt2800_rfcsr_write(rt2x00dev, 13, 0x12);
|
|
|
|
rfcsr = rt2800_rfcsr_read(rt2x00dev, 1);
|
|
rt2x00_set_field8(&rfcsr, RFCSR1_RX0_PD, 0);
|
|
rt2x00_set_field8(&rfcsr, RFCSR1_TX0_PD, 0);
|
|
rt2x00_set_field8(&rfcsr, RFCSR1_RX1_PD, 0);
|
|
rt2x00_set_field8(&rfcsr, RFCSR1_TX1_PD, 0);
|
|
rt2x00_set_field8(&rfcsr, RFCSR1_RX2_PD, 0);
|
|
rt2x00_set_field8(&rfcsr, RFCSR1_TX2_PD, 0);
|
|
rt2x00_set_field8(&rfcsr, RFCSR1_RF_BLOCK_EN, 1);
|
|
rt2x00_set_field8(&rfcsr, RFCSR1_PLL_PD, 1);
|
|
|
|
switch (rt2x00dev->default_ant.tx_chain_num) {
|
|
case 3:
|
|
rt2x00_set_field8(&rfcsr, RFCSR1_TX2_PD, 1);
|
|
fallthrough;
|
|
case 2:
|
|
rt2x00_set_field8(&rfcsr, RFCSR1_TX1_PD, 1);
|
|
fallthrough;
|
|
case 1:
|
|
rt2x00_set_field8(&rfcsr, RFCSR1_TX0_PD, 1);
|
|
break;
|
|
}
|
|
|
|
switch (rt2x00dev->default_ant.rx_chain_num) {
|
|
case 3:
|
|
rt2x00_set_field8(&rfcsr, RFCSR1_RX2_PD, 1);
|
|
fallthrough;
|
|
case 2:
|
|
rt2x00_set_field8(&rfcsr, RFCSR1_RX1_PD, 1);
|
|
fallthrough;
|
|
case 1:
|
|
rt2x00_set_field8(&rfcsr, RFCSR1_RX0_PD, 1);
|
|
break;
|
|
}
|
|
rt2800_rfcsr_write(rt2x00dev, 1, rfcsr);
|
|
|
|
rt2800_freq_cal_mode1(rt2x00dev);
|
|
|
|
rfcsr = rt2800_rfcsr_read(rt2x00dev, 30);
|
|
if (!conf_is_ht40(conf))
|
|
rfcsr &= ~(0x06);
|
|
else
|
|
rfcsr |= 0x06;
|
|
rt2800_rfcsr_write(rt2x00dev, 30, rfcsr);
|
|
|
|
if (rf->channel <= 14)
|
|
rt2800_rfcsr_write(rt2x00dev, 31, 0xa0);
|
|
else
|
|
rt2800_rfcsr_write(rt2x00dev, 31, 0x80);
|
|
|
|
if (conf_is_ht40(conf))
|
|
rt2800_rfcsr_write(rt2x00dev, 32, 0x80);
|
|
else
|
|
rt2800_rfcsr_write(rt2x00dev, 32, 0xd8);
|
|
|
|
if (rf->channel <= 14)
|
|
rt2800_rfcsr_write(rt2x00dev, 34, 0x3c);
|
|
else
|
|
rt2800_rfcsr_write(rt2x00dev, 34, 0x20);
|
|
|
|
/* loopback RF_BS */
|
|
rfcsr = rt2800_rfcsr_read(rt2x00dev, 36);
|
|
if (rf->channel <= 14)
|
|
rt2x00_set_field8(&rfcsr, RFCSR36_RF_BS, 1);
|
|
else
|
|
rt2x00_set_field8(&rfcsr, RFCSR36_RF_BS, 0);
|
|
rt2800_rfcsr_write(rt2x00dev, 36, rfcsr);
|
|
|
|
if (rf->channel <= 14)
|
|
rfcsr = 0x23;
|
|
else if (rf->channel < 100)
|
|
rfcsr = 0x36;
|
|
else if (rf->channel < 132)
|
|
rfcsr = 0x32;
|
|
else
|
|
rfcsr = 0x30;
|
|
|
|
if (txbf_enabled)
|
|
rfcsr |= 0x40;
|
|
|
|
rt2800_rfcsr_write(rt2x00dev, 39, rfcsr);
|
|
|
|
if (rf->channel <= 14)
|
|
rt2800_rfcsr_write(rt2x00dev, 44, 0x93);
|
|
else
|
|
rt2800_rfcsr_write(rt2x00dev, 44, 0x9b);
|
|
|
|
if (rf->channel <= 14)
|
|
rfcsr = 0xbb;
|
|
else if (rf->channel < 100)
|
|
rfcsr = 0xeb;
|
|
else if (rf->channel < 132)
|
|
rfcsr = 0xb3;
|
|
else
|
|
rfcsr = 0x9b;
|
|
rt2800_rfcsr_write(rt2x00dev, 45, rfcsr);
|
|
|
|
if (rf->channel <= 14)
|
|
rfcsr = 0x8e;
|
|
else
|
|
rfcsr = 0x8a;
|
|
|
|
if (txbf_enabled)
|
|
rfcsr |= 0x20;
|
|
|
|
rt2800_rfcsr_write(rt2x00dev, 49, rfcsr);
|
|
|
|
rt2800_rfcsr_write(rt2x00dev, 50, 0x86);
|
|
|
|
rfcsr = rt2800_rfcsr_read(rt2x00dev, 51);
|
|
if (rf->channel <= 14)
|
|
rt2800_rfcsr_write(rt2x00dev, 51, 0x75);
|
|
else
|
|
rt2800_rfcsr_write(rt2x00dev, 51, 0x51);
|
|
|
|
rfcsr = rt2800_rfcsr_read(rt2x00dev, 52);
|
|
if (rf->channel <= 14)
|
|
rt2800_rfcsr_write(rt2x00dev, 52, 0x45);
|
|
else
|
|
rt2800_rfcsr_write(rt2x00dev, 52, 0x05);
|
|
|
|
if (rf->channel <= 14) {
|
|
pwr1 = info->default_power1 & 0x1f;
|
|
pwr2 = info->default_power2 & 0x1f;
|
|
pwr3 = info->default_power3 & 0x1f;
|
|
} else {
|
|
pwr1 = 0x48 | ((info->default_power1 & 0x18) << 1) |
|
|
(info->default_power1 & 0x7);
|
|
pwr2 = 0x48 | ((info->default_power2 & 0x18) << 1) |
|
|
(info->default_power2 & 0x7);
|
|
pwr3 = 0x48 | ((info->default_power3 & 0x18) << 1) |
|
|
(info->default_power3 & 0x7);
|
|
}
|
|
|
|
rt2800_rfcsr_write(rt2x00dev, 53, pwr1);
|
|
rt2800_rfcsr_write(rt2x00dev, 54, pwr2);
|
|
rt2800_rfcsr_write(rt2x00dev, 55, pwr3);
|
|
|
|
rt2x00_dbg(rt2x00dev, "Channel:%d, pwr1:%02x, pwr2:%02x, pwr3:%02x\n",
|
|
rf->channel, pwr1, pwr2, pwr3);
|
|
|
|
bbp = (info->default_power1 >> 5) |
|
|
((info->default_power2 & 0xe0) >> 1);
|
|
rt2800_bbp_write(rt2x00dev, 109, bbp);
|
|
|
|
bbp = rt2800_bbp_read(rt2x00dev, 110);
|
|
bbp &= 0x0f;
|
|
bbp |= (info->default_power3 & 0xe0) >> 1;
|
|
rt2800_bbp_write(rt2x00dev, 110, bbp);
|
|
|
|
rfcsr = rt2800_rfcsr_read(rt2x00dev, 57);
|
|
if (rf->channel <= 14)
|
|
rt2800_rfcsr_write(rt2x00dev, 57, 0x6e);
|
|
else
|
|
rt2800_rfcsr_write(rt2x00dev, 57, 0x3e);
|
|
|
|
/* Enable RF tuning */
|
|
rfcsr = rt2800_rfcsr_read(rt2x00dev, 3);
|
|
rt2x00_set_field8(&rfcsr, RFCSR3_VCOCAL_EN, 1);
|
|
rt2800_rfcsr_write(rt2x00dev, 3, rfcsr);
|
|
|
|
udelay(2000);
|
|
|
|
bbp = rt2800_bbp_read(rt2x00dev, 49);
|
|
/* clear update flag */
|
|
rt2800_bbp_write(rt2x00dev, 49, bbp & 0xfe);
|
|
rt2800_bbp_write(rt2x00dev, 49, bbp);
|
|
|
|
/* TODO: add calibration for TxBF */
|
|
}
|
|
|
|
#define POWER_BOUND 0x27
|
|
#define POWER_BOUND_5G 0x2b
|
|
|
|
static void rt2800_config_channel_rf3290(struct rt2x00_dev *rt2x00dev,
|
|
struct ieee80211_conf *conf,
|
|
struct rf_channel *rf,
|
|
struct channel_info *info)
|
|
{
|
|
u8 rfcsr;
|
|
|
|
rt2800_rfcsr_write(rt2x00dev, 8, rf->rf1);
|
|
rt2800_rfcsr_write(rt2x00dev, 9, rf->rf3);
|
|
rfcsr = rt2800_rfcsr_read(rt2x00dev, 11);
|
|
rt2x00_set_field8(&rfcsr, RFCSR11_R, rf->rf2);
|
|
rt2800_rfcsr_write(rt2x00dev, 11, rfcsr);
|
|
|
|
rfcsr = rt2800_rfcsr_read(rt2x00dev, 49);
|
|
if (info->default_power1 > POWER_BOUND)
|
|
rt2x00_set_field8(&rfcsr, RFCSR49_TX, POWER_BOUND);
|
|
else
|
|
rt2x00_set_field8(&rfcsr, RFCSR49_TX, info->default_power1);
|
|
rt2800_rfcsr_write(rt2x00dev, 49, rfcsr);
|
|
|
|
rt2800_freq_cal_mode1(rt2x00dev);
|
|
|
|
if (rf->channel <= 14) {
|
|
if (rf->channel == 6)
|
|
rt2800_bbp_write(rt2x00dev, 68, 0x0c);
|
|
else
|
|
rt2800_bbp_write(rt2x00dev, 68, 0x0b);
|
|
|
|
if (rf->channel >= 1 && rf->channel <= 6)
|
|
rt2800_bbp_write(rt2x00dev, 59, 0x0f);
|
|
else if (rf->channel >= 7 && rf->channel <= 11)
|
|
rt2800_bbp_write(rt2x00dev, 59, 0x0e);
|
|
else if (rf->channel >= 12 && rf->channel <= 14)
|
|
rt2800_bbp_write(rt2x00dev, 59, 0x0d);
|
|
}
|
|
}
|
|
|
|
static void rt2800_config_channel_rf3322(struct rt2x00_dev *rt2x00dev,
|
|
struct ieee80211_conf *conf,
|
|
struct rf_channel *rf,
|
|
struct channel_info *info)
|
|
{
|
|
u8 rfcsr;
|
|
|
|
rt2800_rfcsr_write(rt2x00dev, 8, rf->rf1);
|
|
rt2800_rfcsr_write(rt2x00dev, 9, rf->rf3);
|
|
|
|
rt2800_rfcsr_write(rt2x00dev, 11, 0x42);
|
|
rt2800_rfcsr_write(rt2x00dev, 12, 0x1c);
|
|
rt2800_rfcsr_write(rt2x00dev, 13, 0x00);
|
|
|
|
if (info->default_power1 > POWER_BOUND)
|
|
rt2800_rfcsr_write(rt2x00dev, 47, POWER_BOUND);
|
|
else
|
|
rt2800_rfcsr_write(rt2x00dev, 47, info->default_power1);
|
|
|
|
if (info->default_power2 > POWER_BOUND)
|
|
rt2800_rfcsr_write(rt2x00dev, 48, POWER_BOUND);
|
|
else
|
|
rt2800_rfcsr_write(rt2x00dev, 48, info->default_power2);
|
|
|
|
rt2800_freq_cal_mode1(rt2x00dev);
|
|
|
|
rfcsr = rt2800_rfcsr_read(rt2x00dev, 1);
|
|
rt2x00_set_field8(&rfcsr, RFCSR1_RX0_PD, 1);
|
|
rt2x00_set_field8(&rfcsr, RFCSR1_TX0_PD, 1);
|
|
|
|
if ( rt2x00dev->default_ant.tx_chain_num == 2 )
|
|
rt2x00_set_field8(&rfcsr, RFCSR1_TX1_PD, 1);
|
|
else
|
|
rt2x00_set_field8(&rfcsr, RFCSR1_TX1_PD, 0);
|
|
|
|
if ( rt2x00dev->default_ant.rx_chain_num == 2 )
|
|
rt2x00_set_field8(&rfcsr, RFCSR1_RX1_PD, 1);
|
|
else
|
|
rt2x00_set_field8(&rfcsr, RFCSR1_RX1_PD, 0);
|
|
|
|
rt2x00_set_field8(&rfcsr, RFCSR1_RX2_PD, 0);
|
|
rt2x00_set_field8(&rfcsr, RFCSR1_TX2_PD, 0);
|
|
|
|
rt2800_rfcsr_write(rt2x00dev, 1, rfcsr);
|
|
|
|
rt2800_rfcsr_write(rt2x00dev, 31, 80);
|
|
}
|
|
|
|
static void rt2800_config_channel_rf53xx(struct rt2x00_dev *rt2x00dev,
|
|
struct ieee80211_conf *conf,
|
|
struct rf_channel *rf,
|
|
struct channel_info *info)
|
|
{
|
|
u8 rfcsr;
|
|
int idx = rf->channel-1;
|
|
|
|
rt2800_rfcsr_write(rt2x00dev, 8, rf->rf1);
|
|
rt2800_rfcsr_write(rt2x00dev, 9, rf->rf3);
|
|
rfcsr = rt2800_rfcsr_read(rt2x00dev, 11);
|
|
rt2x00_set_field8(&rfcsr, RFCSR11_R, rf->rf2);
|
|
rt2800_rfcsr_write(rt2x00dev, 11, rfcsr);
|
|
|
|
rfcsr = rt2800_rfcsr_read(rt2x00dev, 49);
|
|
if (info->default_power1 > POWER_BOUND)
|
|
rt2x00_set_field8(&rfcsr, RFCSR49_TX, POWER_BOUND);
|
|
else
|
|
rt2x00_set_field8(&rfcsr, RFCSR49_TX, info->default_power1);
|
|
rt2800_rfcsr_write(rt2x00dev, 49, rfcsr);
|
|
|
|
if (rt2x00_rt(rt2x00dev, RT5392)) {
|
|
rfcsr = rt2800_rfcsr_read(rt2x00dev, 50);
|
|
if (info->default_power2 > POWER_BOUND)
|
|
rt2x00_set_field8(&rfcsr, RFCSR50_TX, POWER_BOUND);
|
|
else
|
|
rt2x00_set_field8(&rfcsr, RFCSR50_TX,
|
|
info->default_power2);
|
|
rt2800_rfcsr_write(rt2x00dev, 50, rfcsr);
|
|
}
|
|
|
|
rfcsr = rt2800_rfcsr_read(rt2x00dev, 1);
|
|
if (rt2x00_rt(rt2x00dev, RT5392)) {
|
|
rt2x00_set_field8(&rfcsr, RFCSR1_RX1_PD, 1);
|
|
rt2x00_set_field8(&rfcsr, RFCSR1_TX1_PD, 1);
|
|
}
|
|
rt2x00_set_field8(&rfcsr, RFCSR1_RF_BLOCK_EN, 1);
|
|
rt2x00_set_field8(&rfcsr, RFCSR1_PLL_PD, 1);
|
|
rt2x00_set_field8(&rfcsr, RFCSR1_RX0_PD, 1);
|
|
rt2x00_set_field8(&rfcsr, RFCSR1_TX0_PD, 1);
|
|
rt2800_rfcsr_write(rt2x00dev, 1, rfcsr);
|
|
|
|
rt2800_freq_cal_mode1(rt2x00dev);
|
|
|
|
if (rt2x00_has_cap_bt_coexist(rt2x00dev)) {
|
|
if (rt2x00_rt_rev_gte(rt2x00dev, RT5390, REV_RT5390F)) {
|
|
/* r55/r59 value array of channel 1~14 */
|
|
static const u8 r55_bt_rev[] = {0x83, 0x83,
|
|
0x83, 0x73, 0x73, 0x63, 0x53, 0x53,
|
|
0x53, 0x43, 0x43, 0x43, 0x43, 0x43};
|
|
static const u8 r59_bt_rev[] = {0x0e, 0x0e,
|
|
0x0e, 0x0e, 0x0e, 0x0b, 0x0a, 0x09,
|
|
0x07, 0x07, 0x07, 0x07, 0x07, 0x07};
|
|
|
|
rt2800_rfcsr_write(rt2x00dev, 55,
|
|
r55_bt_rev[idx]);
|
|
rt2800_rfcsr_write(rt2x00dev, 59,
|
|
r59_bt_rev[idx]);
|
|
} else {
|
|
static const u8 r59_bt[] = {0x8b, 0x8b, 0x8b,
|
|
0x8b, 0x8b, 0x8b, 0x8b, 0x8a, 0x89,
|
|
0x88, 0x88, 0x86, 0x85, 0x84};
|
|
|
|
rt2800_rfcsr_write(rt2x00dev, 59, r59_bt[idx]);
|
|
}
|
|
} else {
|
|
if (rt2x00_rt_rev_gte(rt2x00dev, RT5390, REV_RT5390F)) {
|
|
static const u8 r55_nonbt_rev[] = {0x23, 0x23,
|
|
0x23, 0x23, 0x13, 0x13, 0x03, 0x03,
|
|
0x03, 0x03, 0x03, 0x03, 0x03, 0x03};
|
|
static const u8 r59_nonbt_rev[] = {0x07, 0x07,
|
|
0x07, 0x07, 0x07, 0x07, 0x07, 0x07,
|
|
0x07, 0x07, 0x06, 0x05, 0x04, 0x04};
|
|
|
|
rt2800_rfcsr_write(rt2x00dev, 55,
|
|
r55_nonbt_rev[idx]);
|
|
rt2800_rfcsr_write(rt2x00dev, 59,
|
|
r59_nonbt_rev[idx]);
|
|
} else if (rt2x00_rt(rt2x00dev, RT5390) ||
|
|
rt2x00_rt(rt2x00dev, RT5392) ||
|
|
rt2x00_rt(rt2x00dev, RT6352)) {
|
|
static const u8 r59_non_bt[] = {0x8f, 0x8f,
|
|
0x8f, 0x8f, 0x8f, 0x8f, 0x8f, 0x8d,
|
|
0x8a, 0x88, 0x88, 0x87, 0x87, 0x86};
|
|
|
|
rt2800_rfcsr_write(rt2x00dev, 59,
|
|
r59_non_bt[idx]);
|
|
} else if (rt2x00_rt(rt2x00dev, RT5350)) {
|
|
static const u8 r59_non_bt[] = {0x0b, 0x0b,
|
|
0x0b, 0x0b, 0x0b, 0x0b, 0x0b, 0x0a,
|
|
0x0a, 0x09, 0x08, 0x07, 0x07, 0x06};
|
|
|
|
rt2800_rfcsr_write(rt2x00dev, 59,
|
|
r59_non_bt[idx]);
|
|
}
|
|
}
|
|
}
|
|
|
|
static void rt2800_config_channel_rf55xx(struct rt2x00_dev *rt2x00dev,
|
|
struct ieee80211_conf *conf,
|
|
struct rf_channel *rf,
|
|
struct channel_info *info)
|
|
{
|
|
u8 rfcsr, ep_reg;
|
|
u32 reg;
|
|
int power_bound;
|
|
|
|
/* TODO */
|
|
const bool is_11b = false;
|
|
const bool is_type_ep = false;
|
|
|
|
reg = rt2800_register_read(rt2x00dev, LDO_CFG0);
|
|
rt2x00_set_field32(®, LDO_CFG0_LDO_CORE_VLEVEL,
|
|
(rf->channel > 14 || conf_is_ht40(conf)) ? 5 : 0);
|
|
rt2800_register_write(rt2x00dev, LDO_CFG0, reg);
|
|
|
|
/* Order of values on rf_channel entry: N, K, mod, R */
|
|
rt2800_rfcsr_write(rt2x00dev, 8, rf->rf1 & 0xff);
|
|
|
|
rfcsr = rt2800_rfcsr_read(rt2x00dev, 9);
|
|
rt2x00_set_field8(&rfcsr, RFCSR9_K, rf->rf2 & 0xf);
|
|
rt2x00_set_field8(&rfcsr, RFCSR9_N, (rf->rf1 & 0x100) >> 8);
|
|
rt2x00_set_field8(&rfcsr, RFCSR9_MOD, ((rf->rf3 - 8) & 0x4) >> 2);
|
|
rt2800_rfcsr_write(rt2x00dev, 9, rfcsr);
|
|
|
|
rfcsr = rt2800_rfcsr_read(rt2x00dev, 11);
|
|
rt2x00_set_field8(&rfcsr, RFCSR11_R, rf->rf4 - 1);
|
|
rt2x00_set_field8(&rfcsr, RFCSR11_MOD, (rf->rf3 - 8) & 0x3);
|
|
rt2800_rfcsr_write(rt2x00dev, 11, rfcsr);
|
|
|
|
if (rf->channel <= 14) {
|
|
rt2800_rfcsr_write(rt2x00dev, 10, 0x90);
|
|
/* FIXME: RF11 owerwrite ? */
|
|
rt2800_rfcsr_write(rt2x00dev, 11, 0x4A);
|
|
rt2800_rfcsr_write(rt2x00dev, 12, 0x52);
|
|
rt2800_rfcsr_write(rt2x00dev, 13, 0x42);
|
|
rt2800_rfcsr_write(rt2x00dev, 22, 0x40);
|
|
rt2800_rfcsr_write(rt2x00dev, 24, 0x4A);
|
|
rt2800_rfcsr_write(rt2x00dev, 25, 0x80);
|
|
rt2800_rfcsr_write(rt2x00dev, 27, 0x42);
|
|
rt2800_rfcsr_write(rt2x00dev, 36, 0x80);
|
|
rt2800_rfcsr_write(rt2x00dev, 37, 0x08);
|
|
rt2800_rfcsr_write(rt2x00dev, 38, 0x89);
|
|
rt2800_rfcsr_write(rt2x00dev, 39, 0x1B);
|
|
rt2800_rfcsr_write(rt2x00dev, 40, 0x0D);
|
|
rt2800_rfcsr_write(rt2x00dev, 41, 0x9B);
|
|
rt2800_rfcsr_write(rt2x00dev, 42, 0xD5);
|
|
rt2800_rfcsr_write(rt2x00dev, 43, 0x72);
|
|
rt2800_rfcsr_write(rt2x00dev, 44, 0x0E);
|
|
rt2800_rfcsr_write(rt2x00dev, 45, 0xA2);
|
|
rt2800_rfcsr_write(rt2x00dev, 46, 0x6B);
|
|
rt2800_rfcsr_write(rt2x00dev, 48, 0x10);
|
|
rt2800_rfcsr_write(rt2x00dev, 51, 0x3E);
|
|
rt2800_rfcsr_write(rt2x00dev, 52, 0x48);
|
|
rt2800_rfcsr_write(rt2x00dev, 54, 0x38);
|
|
rt2800_rfcsr_write(rt2x00dev, 56, 0xA1);
|
|
rt2800_rfcsr_write(rt2x00dev, 57, 0x00);
|
|
rt2800_rfcsr_write(rt2x00dev, 58, 0x39);
|
|
rt2800_rfcsr_write(rt2x00dev, 60, 0x45);
|
|
rt2800_rfcsr_write(rt2x00dev, 61, 0x91);
|
|
rt2800_rfcsr_write(rt2x00dev, 62, 0x39);
|
|
|
|
/* TODO RF27 <- tssi */
|
|
|
|
rfcsr = rf->channel <= 10 ? 0x07 : 0x06;
|
|
rt2800_rfcsr_write(rt2x00dev, 23, rfcsr);
|
|
rt2800_rfcsr_write(rt2x00dev, 59, rfcsr);
|
|
|
|
if (is_11b) {
|
|
/* CCK */
|
|
rt2800_rfcsr_write(rt2x00dev, 31, 0xF8);
|
|
rt2800_rfcsr_write(rt2x00dev, 32, 0xC0);
|
|
if (is_type_ep)
|
|
rt2800_rfcsr_write(rt2x00dev, 55, 0x06);
|
|
else
|
|
rt2800_rfcsr_write(rt2x00dev, 55, 0x47);
|
|
} else {
|
|
/* OFDM */
|
|
if (is_type_ep)
|
|
rt2800_rfcsr_write(rt2x00dev, 55, 0x03);
|
|
else
|
|
rt2800_rfcsr_write(rt2x00dev, 55, 0x43);
|
|
}
|
|
|
|
power_bound = POWER_BOUND;
|
|
ep_reg = 0x2;
|
|
} else {
|
|
rt2800_rfcsr_write(rt2x00dev, 10, 0x97);
|
|
/* FIMXE: RF11 overwrite */
|
|
rt2800_rfcsr_write(rt2x00dev, 11, 0x40);
|
|
rt2800_rfcsr_write(rt2x00dev, 25, 0xBF);
|
|
rt2800_rfcsr_write(rt2x00dev, 27, 0x42);
|
|
rt2800_rfcsr_write(rt2x00dev, 36, 0x00);
|
|
rt2800_rfcsr_write(rt2x00dev, 37, 0x04);
|
|
rt2800_rfcsr_write(rt2x00dev, 38, 0x85);
|
|
rt2800_rfcsr_write(rt2x00dev, 40, 0x42);
|
|
rt2800_rfcsr_write(rt2x00dev, 41, 0xBB);
|
|
rt2800_rfcsr_write(rt2x00dev, 42, 0xD7);
|
|
rt2800_rfcsr_write(rt2x00dev, 45, 0x41);
|
|
rt2800_rfcsr_write(rt2x00dev, 48, 0x00);
|
|
rt2800_rfcsr_write(rt2x00dev, 57, 0x77);
|
|
rt2800_rfcsr_write(rt2x00dev, 60, 0x05);
|
|
rt2800_rfcsr_write(rt2x00dev, 61, 0x01);
|
|
|
|
/* TODO RF27 <- tssi */
|
|
|
|
if (rf->channel >= 36 && rf->channel <= 64) {
|
|
|
|
rt2800_rfcsr_write(rt2x00dev, 12, 0x2E);
|
|
rt2800_rfcsr_write(rt2x00dev, 13, 0x22);
|
|
rt2800_rfcsr_write(rt2x00dev, 22, 0x60);
|
|
rt2800_rfcsr_write(rt2x00dev, 23, 0x7F);
|
|
if (rf->channel <= 50)
|
|
rt2800_rfcsr_write(rt2x00dev, 24, 0x09);
|
|
else if (rf->channel >= 52)
|
|
rt2800_rfcsr_write(rt2x00dev, 24, 0x07);
|
|
rt2800_rfcsr_write(rt2x00dev, 39, 0x1C);
|
|
rt2800_rfcsr_write(rt2x00dev, 43, 0x5B);
|
|
rt2800_rfcsr_write(rt2x00dev, 44, 0X40);
|
|
rt2800_rfcsr_write(rt2x00dev, 46, 0X00);
|
|
rt2800_rfcsr_write(rt2x00dev, 51, 0xFE);
|
|
rt2800_rfcsr_write(rt2x00dev, 52, 0x0C);
|
|
rt2800_rfcsr_write(rt2x00dev, 54, 0xF8);
|
|
if (rf->channel <= 50) {
|
|
rt2800_rfcsr_write(rt2x00dev, 55, 0x06),
|
|
rt2800_rfcsr_write(rt2x00dev, 56, 0xD3);
|
|
} else if (rf->channel >= 52) {
|
|
rt2800_rfcsr_write(rt2x00dev, 55, 0x04);
|
|
rt2800_rfcsr_write(rt2x00dev, 56, 0xBB);
|
|
}
|
|
|
|
rt2800_rfcsr_write(rt2x00dev, 58, 0x15);
|
|
rt2800_rfcsr_write(rt2x00dev, 59, 0x7F);
|
|
rt2800_rfcsr_write(rt2x00dev, 62, 0x15);
|
|
|
|
} else if (rf->channel >= 100 && rf->channel <= 165) {
|
|
|
|
rt2800_rfcsr_write(rt2x00dev, 12, 0x0E);
|
|
rt2800_rfcsr_write(rt2x00dev, 13, 0x42);
|
|
rt2800_rfcsr_write(rt2x00dev, 22, 0x40);
|
|
if (rf->channel <= 153) {
|
|
rt2800_rfcsr_write(rt2x00dev, 23, 0x3C);
|
|
rt2800_rfcsr_write(rt2x00dev, 24, 0x06);
|
|
} else if (rf->channel >= 155) {
|
|
rt2800_rfcsr_write(rt2x00dev, 23, 0x38);
|
|
rt2800_rfcsr_write(rt2x00dev, 24, 0x05);
|
|
}
|
|
if (rf->channel <= 138) {
|
|
rt2800_rfcsr_write(rt2x00dev, 39, 0x1A);
|
|
rt2800_rfcsr_write(rt2x00dev, 43, 0x3B);
|
|
rt2800_rfcsr_write(rt2x00dev, 44, 0x20);
|
|
rt2800_rfcsr_write(rt2x00dev, 46, 0x18);
|
|
} else if (rf->channel >= 140) {
|
|
rt2800_rfcsr_write(rt2x00dev, 39, 0x18);
|
|
rt2800_rfcsr_write(rt2x00dev, 43, 0x1B);
|
|
rt2800_rfcsr_write(rt2x00dev, 44, 0x10);
|
|
rt2800_rfcsr_write(rt2x00dev, 46, 0X08);
|
|
}
|
|
if (rf->channel <= 124)
|
|
rt2800_rfcsr_write(rt2x00dev, 51, 0xFC);
|
|
else if (rf->channel >= 126)
|
|
rt2800_rfcsr_write(rt2x00dev, 51, 0xEC);
|
|
if (rf->channel <= 138)
|
|
rt2800_rfcsr_write(rt2x00dev, 52, 0x06);
|
|
else if (rf->channel >= 140)
|
|
rt2800_rfcsr_write(rt2x00dev, 52, 0x06);
|
|
rt2800_rfcsr_write(rt2x00dev, 54, 0xEB);
|
|
if (rf->channel <= 138)
|
|
rt2800_rfcsr_write(rt2x00dev, 55, 0x01);
|
|
else if (rf->channel >= 140)
|
|
rt2800_rfcsr_write(rt2x00dev, 55, 0x00);
|
|
if (rf->channel <= 128)
|
|
rt2800_rfcsr_write(rt2x00dev, 56, 0xBB);
|
|
else if (rf->channel >= 130)
|
|
rt2800_rfcsr_write(rt2x00dev, 56, 0xAB);
|
|
if (rf->channel <= 116)
|
|
rt2800_rfcsr_write(rt2x00dev, 58, 0x1D);
|
|
else if (rf->channel >= 118)
|
|
rt2800_rfcsr_write(rt2x00dev, 58, 0x15);
|
|
if (rf->channel <= 138)
|
|
rt2800_rfcsr_write(rt2x00dev, 59, 0x3F);
|
|
else if (rf->channel >= 140)
|
|
rt2800_rfcsr_write(rt2x00dev, 59, 0x7C);
|
|
if (rf->channel <= 116)
|
|
rt2800_rfcsr_write(rt2x00dev, 62, 0x1D);
|
|
else if (rf->channel >= 118)
|
|
rt2800_rfcsr_write(rt2x00dev, 62, 0x15);
|
|
}
|
|
|
|
power_bound = POWER_BOUND_5G;
|
|
ep_reg = 0x3;
|
|
}
|
|
|
|
rfcsr = rt2800_rfcsr_read(rt2x00dev, 49);
|
|
if (info->default_power1 > power_bound)
|
|
rt2x00_set_field8(&rfcsr, RFCSR49_TX, power_bound);
|
|
else
|
|
rt2x00_set_field8(&rfcsr, RFCSR49_TX, info->default_power1);
|
|
if (is_type_ep)
|
|
rt2x00_set_field8(&rfcsr, RFCSR49_EP, ep_reg);
|
|
rt2800_rfcsr_write(rt2x00dev, 49, rfcsr);
|
|
|
|
rfcsr = rt2800_rfcsr_read(rt2x00dev, 50);
|
|
if (info->default_power2 > power_bound)
|
|
rt2x00_set_field8(&rfcsr, RFCSR50_TX, power_bound);
|
|
else
|
|
rt2x00_set_field8(&rfcsr, RFCSR50_TX, info->default_power2);
|
|
if (is_type_ep)
|
|
rt2x00_set_field8(&rfcsr, RFCSR50_EP, ep_reg);
|
|
rt2800_rfcsr_write(rt2x00dev, 50, rfcsr);
|
|
|
|
rfcsr = rt2800_rfcsr_read(rt2x00dev, 1);
|
|
rt2x00_set_field8(&rfcsr, RFCSR1_RF_BLOCK_EN, 1);
|
|
rt2x00_set_field8(&rfcsr, RFCSR1_PLL_PD, 1);
|
|
|
|
rt2x00_set_field8(&rfcsr, RFCSR1_TX0_PD,
|
|
rt2x00dev->default_ant.tx_chain_num >= 1);
|
|
rt2x00_set_field8(&rfcsr, RFCSR1_TX1_PD,
|
|
rt2x00dev->default_ant.tx_chain_num == 2);
|
|
rt2x00_set_field8(&rfcsr, RFCSR1_TX2_PD, 0);
|
|
|
|
rt2x00_set_field8(&rfcsr, RFCSR1_RX0_PD,
|
|
rt2x00dev->default_ant.rx_chain_num >= 1);
|
|
rt2x00_set_field8(&rfcsr, RFCSR1_RX1_PD,
|
|
rt2x00dev->default_ant.rx_chain_num == 2);
|
|
rt2x00_set_field8(&rfcsr, RFCSR1_RX2_PD, 0);
|
|
|
|
rt2800_rfcsr_write(rt2x00dev, 1, rfcsr);
|
|
rt2800_rfcsr_write(rt2x00dev, 6, 0xe4);
|
|
|
|
if (conf_is_ht40(conf))
|
|
rt2800_rfcsr_write(rt2x00dev, 30, 0x16);
|
|
else
|
|
rt2800_rfcsr_write(rt2x00dev, 30, 0x10);
|
|
|
|
if (!is_11b) {
|
|
rt2800_rfcsr_write(rt2x00dev, 31, 0x80);
|
|
rt2800_rfcsr_write(rt2x00dev, 32, 0x80);
|
|
}
|
|
|
|
/* TODO proper frequency adjustment */
|
|
rt2800_freq_cal_mode1(rt2x00dev);
|
|
|
|
/* TODO merge with others */
|
|
rfcsr = rt2800_rfcsr_read(rt2x00dev, 3);
|
|
rt2x00_set_field8(&rfcsr, RFCSR3_VCOCAL_EN, 1);
|
|
rt2800_rfcsr_write(rt2x00dev, 3, rfcsr);
|
|
|
|
/* BBP settings */
|
|
rt2800_bbp_write(rt2x00dev, 62, 0x37 - rt2x00dev->lna_gain);
|
|
rt2800_bbp_write(rt2x00dev, 63, 0x37 - rt2x00dev->lna_gain);
|
|
rt2800_bbp_write(rt2x00dev, 64, 0x37 - rt2x00dev->lna_gain);
|
|
|
|
rt2800_bbp_write(rt2x00dev, 79, (rf->channel <= 14) ? 0x1C : 0x18);
|
|
rt2800_bbp_write(rt2x00dev, 80, (rf->channel <= 14) ? 0x0E : 0x08);
|
|
rt2800_bbp_write(rt2x00dev, 81, (rf->channel <= 14) ? 0x3A : 0x38);
|
|
rt2800_bbp_write(rt2x00dev, 82, (rf->channel <= 14) ? 0x62 : 0x92);
|
|
|
|
/* GLRT band configuration */
|
|
rt2800_bbp_write(rt2x00dev, 195, 128);
|
|
rt2800_bbp_write(rt2x00dev, 196, (rf->channel <= 14) ? 0xE0 : 0xF0);
|
|
rt2800_bbp_write(rt2x00dev, 195, 129);
|
|
rt2800_bbp_write(rt2x00dev, 196, (rf->channel <= 14) ? 0x1F : 0x1E);
|
|
rt2800_bbp_write(rt2x00dev, 195, 130);
|
|
rt2800_bbp_write(rt2x00dev, 196, (rf->channel <= 14) ? 0x38 : 0x28);
|
|
rt2800_bbp_write(rt2x00dev, 195, 131);
|
|
rt2800_bbp_write(rt2x00dev, 196, (rf->channel <= 14) ? 0x32 : 0x20);
|
|
rt2800_bbp_write(rt2x00dev, 195, 133);
|
|
rt2800_bbp_write(rt2x00dev, 196, (rf->channel <= 14) ? 0x28 : 0x7F);
|
|
rt2800_bbp_write(rt2x00dev, 195, 124);
|
|
rt2800_bbp_write(rt2x00dev, 196, (rf->channel <= 14) ? 0x19 : 0x7F);
|
|
}
|
|
|
|
static void rt2800_config_channel_rf7620(struct rt2x00_dev *rt2x00dev,
|
|
struct ieee80211_conf *conf,
|
|
struct rf_channel *rf,
|
|
struct channel_info *info)
|
|
{
|
|
struct rt2800_drv_data *drv_data = rt2x00dev->drv_data;
|
|
u8 rx_agc_fc, tx_agc_fc;
|
|
u8 rfcsr;
|
|
|
|
/* Frequeny plan setting */
|
|
/* Rdiv setting (set 0x03 if Xtal==20)
|
|
* R13[1:0]
|
|
*/
|
|
rfcsr = rt2800_rfcsr_read(rt2x00dev, 13);
|
|
rt2x00_set_field8(&rfcsr, RFCSR13_RDIV_MT7620,
|
|
rt2800_clk_is_20mhz(rt2x00dev) ? 3 : 0);
|
|
rt2800_rfcsr_write(rt2x00dev, 13, rfcsr);
|
|
|
|
/* N setting
|
|
* R20[7:0] in rf->rf1
|
|
* R21[0] always 0
|
|
*/
|
|
rfcsr = rt2800_rfcsr_read(rt2x00dev, 20);
|
|
rfcsr = (rf->rf1 & 0x00ff);
|
|
rt2800_rfcsr_write(rt2x00dev, 20, rfcsr);
|
|
|
|
rfcsr = rt2800_rfcsr_read(rt2x00dev, 21);
|
|
rt2x00_set_field8(&rfcsr, RFCSR21_BIT1, 0);
|
|
rt2800_rfcsr_write(rt2x00dev, 21, rfcsr);
|
|
|
|
/* K setting (always 0)
|
|
* R16[3:0] (RF PLL freq selection)
|
|
*/
|
|
rfcsr = rt2800_rfcsr_read(rt2x00dev, 16);
|
|
rt2x00_set_field8(&rfcsr, RFCSR16_RF_PLL_FREQ_SEL_MT7620, 0);
|
|
rt2800_rfcsr_write(rt2x00dev, 16, rfcsr);
|
|
|
|
/* D setting (always 0)
|
|
* R22[2:0] (D=15, R22[2:0]=<111>)
|
|
*/
|
|
rfcsr = rt2800_rfcsr_read(rt2x00dev, 22);
|
|
rt2x00_set_field8(&rfcsr, RFCSR22_FREQPLAN_D_MT7620, 0);
|
|
rt2800_rfcsr_write(rt2x00dev, 22, rfcsr);
|
|
|
|
/* Ksd setting
|
|
* Ksd: R17<7:0> in rf->rf2
|
|
* R18<7:0> in rf->rf3
|
|
* R19<1:0> in rf->rf4
|
|
*/
|
|
rfcsr = rt2800_rfcsr_read(rt2x00dev, 17);
|
|
rfcsr = rf->rf2;
|
|
rt2800_rfcsr_write(rt2x00dev, 17, rfcsr);
|
|
|
|
rfcsr = rt2800_rfcsr_read(rt2x00dev, 18);
|
|
rfcsr = rf->rf3;
|
|
rt2800_rfcsr_write(rt2x00dev, 18, rfcsr);
|
|
|
|
rfcsr = rt2800_rfcsr_read(rt2x00dev, 19);
|
|
rt2x00_set_field8(&rfcsr, RFCSR19_K, rf->rf4);
|
|
rt2800_rfcsr_write(rt2x00dev, 19, rfcsr);
|
|
|
|
/* Default: XO=20MHz , SDM mode */
|
|
rfcsr = rt2800_rfcsr_read(rt2x00dev, 16);
|
|
rt2x00_set_field8(&rfcsr, RFCSR16_SDM_MODE_MT7620, 0x80);
|
|
rt2800_rfcsr_write(rt2x00dev, 16, rfcsr);
|
|
|
|
rfcsr = rt2800_rfcsr_read(rt2x00dev, 21);
|
|
rt2x00_set_field8(&rfcsr, RFCSR21_BIT8, 1);
|
|
rt2800_rfcsr_write(rt2x00dev, 21, rfcsr);
|
|
|
|
rfcsr = rt2800_rfcsr_read(rt2x00dev, 1);
|
|
rt2x00_set_field8(&rfcsr, RFCSR1_TX2_EN_MT7620,
|
|
rt2x00dev->default_ant.tx_chain_num != 1);
|
|
rt2800_rfcsr_write(rt2x00dev, 1, rfcsr);
|
|
|
|
rfcsr = rt2800_rfcsr_read(rt2x00dev, 2);
|
|
rt2x00_set_field8(&rfcsr, RFCSR2_TX2_EN_MT7620,
|
|
rt2x00dev->default_ant.tx_chain_num != 1);
|
|
rt2x00_set_field8(&rfcsr, RFCSR2_RX2_EN_MT7620,
|
|
rt2x00dev->default_ant.rx_chain_num != 1);
|
|
rt2800_rfcsr_write(rt2x00dev, 2, rfcsr);
|
|
|
|
rfcsr = rt2800_rfcsr_read(rt2x00dev, 42);
|
|
rt2x00_set_field8(&rfcsr, RFCSR42_TX2_EN_MT7620,
|
|
rt2x00dev->default_ant.tx_chain_num != 1);
|
|
rt2800_rfcsr_write(rt2x00dev, 42, rfcsr);
|
|
|
|
/* RF for DC Cal BW */
|
|
if (conf_is_ht40(conf)) {
|
|
rt2800_rfcsr_write_dccal(rt2x00dev, 6, 0x10);
|
|
rt2800_rfcsr_write_dccal(rt2x00dev, 7, 0x10);
|
|
rt2800_rfcsr_write_dccal(rt2x00dev, 8, 0x04);
|
|
rt2800_rfcsr_write_dccal(rt2x00dev, 58, 0x10);
|
|
rt2800_rfcsr_write_dccal(rt2x00dev, 59, 0x10);
|
|
} else {
|
|
rt2800_rfcsr_write_dccal(rt2x00dev, 6, 0x20);
|
|
rt2800_rfcsr_write_dccal(rt2x00dev, 7, 0x20);
|
|
rt2800_rfcsr_write_dccal(rt2x00dev, 8, 0x00);
|
|
rt2800_rfcsr_write_dccal(rt2x00dev, 58, 0x20);
|
|
rt2800_rfcsr_write_dccal(rt2x00dev, 59, 0x20);
|
|
}
|
|
|
|
if (conf_is_ht40(conf)) {
|
|
rt2800_rfcsr_write_dccal(rt2x00dev, 58, 0x08);
|
|
rt2800_rfcsr_write_dccal(rt2x00dev, 59, 0x08);
|
|
} else {
|
|
rt2800_rfcsr_write_dccal(rt2x00dev, 58, 0x28);
|
|
rt2800_rfcsr_write_dccal(rt2x00dev, 59, 0x28);
|
|
}
|
|
|
|
rfcsr = rt2800_rfcsr_read(rt2x00dev, 28);
|
|
rt2x00_set_field8(&rfcsr, RFCSR28_CH11_HT40,
|
|
conf_is_ht40(conf) && (rf->channel == 11));
|
|
rt2800_rfcsr_write(rt2x00dev, 28, rfcsr);
|
|
|
|
if (!test_bit(DEVICE_STATE_SCANNING, &rt2x00dev->flags)) {
|
|
if (conf_is_ht40(conf)) {
|
|
rx_agc_fc = drv_data->rx_calibration_bw40;
|
|
tx_agc_fc = drv_data->tx_calibration_bw40;
|
|
} else {
|
|
rx_agc_fc = drv_data->rx_calibration_bw20;
|
|
tx_agc_fc = drv_data->tx_calibration_bw20;
|
|
}
|
|
rfcsr = rt2800_rfcsr_read_bank(rt2x00dev, 5, 6);
|
|
rfcsr &= (~0x3F);
|
|
rfcsr |= rx_agc_fc;
|
|
rt2800_rfcsr_write_bank(rt2x00dev, 5, 6, rfcsr);
|
|
rfcsr = rt2800_rfcsr_read_bank(rt2x00dev, 5, 7);
|
|
rfcsr &= (~0x3F);
|
|
rfcsr |= rx_agc_fc;
|
|
rt2800_rfcsr_write_bank(rt2x00dev, 5, 7, rfcsr);
|
|
rfcsr = rt2800_rfcsr_read_bank(rt2x00dev, 7, 6);
|
|
rfcsr &= (~0x3F);
|
|
rfcsr |= rx_agc_fc;
|
|
rt2800_rfcsr_write_bank(rt2x00dev, 7, 6, rfcsr);
|
|
rfcsr = rt2800_rfcsr_read_bank(rt2x00dev, 7, 7);
|
|
rfcsr &= (~0x3F);
|
|
rfcsr |= rx_agc_fc;
|
|
rt2800_rfcsr_write_bank(rt2x00dev, 7, 7, rfcsr);
|
|
|
|
rfcsr = rt2800_rfcsr_read_bank(rt2x00dev, 5, 58);
|
|
rfcsr &= (~0x3F);
|
|
rfcsr |= tx_agc_fc;
|
|
rt2800_rfcsr_write_bank(rt2x00dev, 5, 58, rfcsr);
|
|
rfcsr = rt2800_rfcsr_read_bank(rt2x00dev, 5, 59);
|
|
rfcsr &= (~0x3F);
|
|
rfcsr |= tx_agc_fc;
|
|
rt2800_rfcsr_write_bank(rt2x00dev, 5, 59, rfcsr);
|
|
rfcsr = rt2800_rfcsr_read_bank(rt2x00dev, 7, 58);
|
|
rfcsr &= (~0x3F);
|
|
rfcsr |= tx_agc_fc;
|
|
rt2800_rfcsr_write_bank(rt2x00dev, 7, 58, rfcsr);
|
|
rfcsr = rt2800_rfcsr_read_bank(rt2x00dev, 7, 59);
|
|
rfcsr &= (~0x3F);
|
|
rfcsr |= tx_agc_fc;
|
|
rt2800_rfcsr_write_bank(rt2x00dev, 7, 59, rfcsr);
|
|
}
|
|
|
|
if (conf_is_ht40(conf)) {
|
|
rt2800_bbp_glrt_write(rt2x00dev, 141, 0x10);
|
|
rt2800_bbp_glrt_write(rt2x00dev, 157, 0x2f);
|
|
} else {
|
|
rt2800_bbp_glrt_write(rt2x00dev, 141, 0x1a);
|
|
rt2800_bbp_glrt_write(rt2x00dev, 157, 0x40);
|
|
}
|
|
}
|
|
|
|
static void rt2800_config_alc(struct rt2x00_dev *rt2x00dev,
|
|
struct ieee80211_channel *chan,
|
|
int power_level) {
|
|
u16 eeprom, target_power, max_power;
|
|
u32 mac_sys_ctrl;
|
|
u32 reg;
|
|
u8 bbp;
|
|
|
|
/* hardware unit is 0.5dBm, limited to 23.5dBm */
|
|
power_level *= 2;
|
|
if (power_level > 0x2f)
|
|
power_level = 0x2f;
|
|
|
|
max_power = chan->max_power * 2;
|
|
if (max_power > 0x2f)
|
|
max_power = 0x2f;
|
|
|
|
reg = rt2800_register_read(rt2x00dev, TX_ALC_CFG_0);
|
|
rt2x00_set_field32(®, TX_ALC_CFG_0_CH_INIT_0, power_level);
|
|
rt2x00_set_field32(®, TX_ALC_CFG_0_CH_INIT_1, power_level);
|
|
rt2x00_set_field32(®, TX_ALC_CFG_0_LIMIT_0, max_power);
|
|
rt2x00_set_field32(®, TX_ALC_CFG_0_LIMIT_1, max_power);
|
|
|
|
eeprom = rt2800_eeprom_read(rt2x00dev, EEPROM_NIC_CONF1);
|
|
if (rt2x00_get_field16(eeprom, EEPROM_NIC_CONF1_INTERNAL_TX_ALC)) {
|
|
/* init base power by eeprom target power */
|
|
target_power = rt2800_eeprom_read(rt2x00dev,
|
|
EEPROM_TXPOWER_INIT);
|
|
rt2x00_set_field32(®, TX_ALC_CFG_0_CH_INIT_0, target_power);
|
|
rt2x00_set_field32(®, TX_ALC_CFG_0_CH_INIT_1, target_power);
|
|
}
|
|
rt2800_register_write(rt2x00dev, TX_ALC_CFG_0, reg);
|
|
|
|
reg = rt2800_register_read(rt2x00dev, TX_ALC_CFG_1);
|
|
rt2x00_set_field32(®, TX_ALC_CFG_1_TX_TEMP_COMP, 0);
|
|
rt2800_register_write(rt2x00dev, TX_ALC_CFG_1, reg);
|
|
|
|
/* Save MAC SYS CTRL registers */
|
|
mac_sys_ctrl = rt2800_register_read(rt2x00dev, MAC_SYS_CTRL);
|
|
/* Disable Tx/Rx */
|
|
rt2800_register_write(rt2x00dev, MAC_SYS_CTRL, 0);
|
|
/* Check MAC Tx/Rx idle */
|
|
if (unlikely(rt2800_wait_bbp_rf_ready(rt2x00dev, MAC_STATUS_CFG_BBP_RF_BUSY)))
|
|
rt2x00_warn(rt2x00dev, "RF busy while configuring ALC\n");
|
|
|
|
if (chan->center_freq > 2457) {
|
|
bbp = rt2800_bbp_read(rt2x00dev, 30);
|
|
bbp = 0x40;
|
|
rt2800_bbp_write(rt2x00dev, 30, bbp);
|
|
rt2800_rfcsr_write(rt2x00dev, 39, 0);
|
|
if (rt2x00_has_cap_external_lna_bg(rt2x00dev))
|
|
rt2800_rfcsr_write(rt2x00dev, 42, 0xfb);
|
|
else
|
|
rt2800_rfcsr_write(rt2x00dev, 42, 0x7b);
|
|
} else {
|
|
bbp = rt2800_bbp_read(rt2x00dev, 30);
|
|
bbp = 0x1f;
|
|
rt2800_bbp_write(rt2x00dev, 30, bbp);
|
|
rt2800_rfcsr_write(rt2x00dev, 39, 0x80);
|
|
if (rt2x00_has_cap_external_lna_bg(rt2x00dev))
|
|
rt2800_rfcsr_write(rt2x00dev, 42, 0xdb);
|
|
else
|
|
rt2800_rfcsr_write(rt2x00dev, 42, 0x5b);
|
|
}
|
|
rt2800_register_write(rt2x00dev, MAC_SYS_CTRL, mac_sys_ctrl);
|
|
|
|
rt2800_vco_calibration(rt2x00dev);
|
|
}
|
|
|
|
static void rt2800_bbp_write_with_rx_chain(struct rt2x00_dev *rt2x00dev,
|
|
const unsigned int word,
|
|
const u8 value)
|
|
{
|
|
u8 chain, reg;
|
|
|
|
for (chain = 0; chain < rt2x00dev->default_ant.rx_chain_num; chain++) {
|
|
reg = rt2800_bbp_read(rt2x00dev, 27);
|
|
rt2x00_set_field8(®, BBP27_RX_CHAIN_SEL, chain);
|
|
rt2800_bbp_write(rt2x00dev, 27, reg);
|
|
|
|
rt2800_bbp_write(rt2x00dev, word, value);
|
|
}
|
|
}
|
|
|
|
static void rt2800_iq_calibrate(struct rt2x00_dev *rt2x00dev, int channel)
|
|
{
|
|
u8 cal;
|
|
|
|
/* TX0 IQ Gain */
|
|
rt2800_bbp_write(rt2x00dev, 158, 0x2c);
|
|
if (channel <= 14)
|
|
cal = rt2x00_eeprom_byte(rt2x00dev, EEPROM_IQ_GAIN_CAL_TX0_2G);
|
|
else if (channel >= 36 && channel <= 64)
|
|
cal = rt2x00_eeprom_byte(rt2x00dev,
|
|
EEPROM_IQ_GAIN_CAL_TX0_CH36_TO_CH64_5G);
|
|
else if (channel >= 100 && channel <= 138)
|
|
cal = rt2x00_eeprom_byte(rt2x00dev,
|
|
EEPROM_IQ_GAIN_CAL_TX0_CH100_TO_CH138_5G);
|
|
else if (channel >= 140 && channel <= 165)
|
|
cal = rt2x00_eeprom_byte(rt2x00dev,
|
|
EEPROM_IQ_GAIN_CAL_TX0_CH140_TO_CH165_5G);
|
|
else
|
|
cal = 0;
|
|
rt2800_bbp_write(rt2x00dev, 159, cal);
|
|
|
|
/* TX0 IQ Phase */
|
|
rt2800_bbp_write(rt2x00dev, 158, 0x2d);
|
|
if (channel <= 14)
|
|
cal = rt2x00_eeprom_byte(rt2x00dev, EEPROM_IQ_PHASE_CAL_TX0_2G);
|
|
else if (channel >= 36 && channel <= 64)
|
|
cal = rt2x00_eeprom_byte(rt2x00dev,
|
|
EEPROM_IQ_PHASE_CAL_TX0_CH36_TO_CH64_5G);
|
|
else if (channel >= 100 && channel <= 138)
|
|
cal = rt2x00_eeprom_byte(rt2x00dev,
|
|
EEPROM_IQ_PHASE_CAL_TX0_CH100_TO_CH138_5G);
|
|
else if (channel >= 140 && channel <= 165)
|
|
cal = rt2x00_eeprom_byte(rt2x00dev,
|
|
EEPROM_IQ_PHASE_CAL_TX0_CH140_TO_CH165_5G);
|
|
else
|
|
cal = 0;
|
|
rt2800_bbp_write(rt2x00dev, 159, cal);
|
|
|
|
/* TX1 IQ Gain */
|
|
rt2800_bbp_write(rt2x00dev, 158, 0x4a);
|
|
if (channel <= 14)
|
|
cal = rt2x00_eeprom_byte(rt2x00dev, EEPROM_IQ_GAIN_CAL_TX1_2G);
|
|
else if (channel >= 36 && channel <= 64)
|
|
cal = rt2x00_eeprom_byte(rt2x00dev,
|
|
EEPROM_IQ_GAIN_CAL_TX1_CH36_TO_CH64_5G);
|
|
else if (channel >= 100 && channel <= 138)
|
|
cal = rt2x00_eeprom_byte(rt2x00dev,
|
|
EEPROM_IQ_GAIN_CAL_TX1_CH100_TO_CH138_5G);
|
|
else if (channel >= 140 && channel <= 165)
|
|
cal = rt2x00_eeprom_byte(rt2x00dev,
|
|
EEPROM_IQ_GAIN_CAL_TX1_CH140_TO_CH165_5G);
|
|
else
|
|
cal = 0;
|
|
rt2800_bbp_write(rt2x00dev, 159, cal);
|
|
|
|
/* TX1 IQ Phase */
|
|
rt2800_bbp_write(rt2x00dev, 158, 0x4b);
|
|
if (channel <= 14)
|
|
cal = rt2x00_eeprom_byte(rt2x00dev, EEPROM_IQ_PHASE_CAL_TX1_2G);
|
|
else if (channel >= 36 && channel <= 64)
|
|
cal = rt2x00_eeprom_byte(rt2x00dev,
|
|
EEPROM_IQ_PHASE_CAL_TX1_CH36_TO_CH64_5G);
|
|
else if (channel >= 100 && channel <= 138)
|
|
cal = rt2x00_eeprom_byte(rt2x00dev,
|
|
EEPROM_IQ_PHASE_CAL_TX1_CH100_TO_CH138_5G);
|
|
else if (channel >= 140 && channel <= 165)
|
|
cal = rt2x00_eeprom_byte(rt2x00dev,
|
|
EEPROM_IQ_PHASE_CAL_TX1_CH140_TO_CH165_5G);
|
|
else
|
|
cal = 0;
|
|
rt2800_bbp_write(rt2x00dev, 159, cal);
|
|
|
|
/* FIXME: possible RX0, RX1 callibration ? */
|
|
|
|
/* RF IQ compensation control */
|
|
rt2800_bbp_write(rt2x00dev, 158, 0x04);
|
|
cal = rt2x00_eeprom_byte(rt2x00dev, EEPROM_RF_IQ_COMPENSATION_CONTROL);
|
|
rt2800_bbp_write(rt2x00dev, 159, cal != 0xff ? cal : 0);
|
|
|
|
/* RF IQ imbalance compensation control */
|
|
rt2800_bbp_write(rt2x00dev, 158, 0x03);
|
|
cal = rt2x00_eeprom_byte(rt2x00dev,
|
|
EEPROM_RF_IQ_IMBALANCE_COMPENSATION_CONTROL);
|
|
rt2800_bbp_write(rt2x00dev, 159, cal != 0xff ? cal : 0);
|
|
}
|
|
|
|
static s8 rt2800_txpower_to_dev(struct rt2x00_dev *rt2x00dev,
|
|
unsigned int channel,
|
|
s8 txpower)
|
|
{
|
|
if (rt2x00_rt(rt2x00dev, RT3593) ||
|
|
rt2x00_rt(rt2x00dev, RT3883))
|
|
txpower = rt2x00_get_field8(txpower, EEPROM_TXPOWER_ALC);
|
|
|
|
if (channel <= 14)
|
|
return clamp_t(s8, txpower, MIN_G_TXPOWER, MAX_G_TXPOWER);
|
|
|
|
if (rt2x00_rt(rt2x00dev, RT3593) ||
|
|
rt2x00_rt(rt2x00dev, RT3883))
|
|
return clamp_t(s8, txpower, MIN_A_TXPOWER_3593,
|
|
MAX_A_TXPOWER_3593);
|
|
else
|
|
return clamp_t(s8, txpower, MIN_A_TXPOWER, MAX_A_TXPOWER);
|
|
}
|
|
|
|
static void rt3883_bbp_adjust(struct rt2x00_dev *rt2x00dev,
|
|
struct rf_channel *rf)
|
|
{
|
|
u8 bbp;
|
|
|
|
bbp = (rf->channel > 14) ? 0x48 : 0x38;
|
|
rt2800_bbp_write_with_rx_chain(rt2x00dev, 66, bbp);
|
|
|
|
rt2800_bbp_write(rt2x00dev, 69, 0x12);
|
|
|
|
if (rf->channel <= 14) {
|
|
rt2800_bbp_write(rt2x00dev, 70, 0x0a);
|
|
} else {
|
|
/* Disable CCK packet detection */
|
|
rt2800_bbp_write(rt2x00dev, 70, 0x00);
|
|
}
|
|
|
|
rt2800_bbp_write(rt2x00dev, 73, 0x10);
|
|
|
|
if (rf->channel > 14) {
|
|
rt2800_bbp_write(rt2x00dev, 62, 0x1d);
|
|
rt2800_bbp_write(rt2x00dev, 63, 0x1d);
|
|
rt2800_bbp_write(rt2x00dev, 64, 0x1d);
|
|
} else {
|
|
rt2800_bbp_write(rt2x00dev, 62, 0x2d);
|
|
rt2800_bbp_write(rt2x00dev, 63, 0x2d);
|
|
rt2800_bbp_write(rt2x00dev, 64, 0x2d);
|
|
}
|
|
}
|
|
|
|
static void rt2800_config_channel(struct rt2x00_dev *rt2x00dev,
|
|
struct ieee80211_conf *conf,
|
|
struct rf_channel *rf,
|
|
struct channel_info *info)
|
|
{
|
|
u32 reg;
|
|
u32 tx_pin;
|
|
u8 bbp, rfcsr;
|
|
|
|
info->default_power1 = rt2800_txpower_to_dev(rt2x00dev, rf->channel,
|
|
info->default_power1);
|
|
info->default_power2 = rt2800_txpower_to_dev(rt2x00dev, rf->channel,
|
|
info->default_power2);
|
|
if (rt2x00dev->default_ant.tx_chain_num > 2)
|
|
info->default_power3 =
|
|
rt2800_txpower_to_dev(rt2x00dev, rf->channel,
|
|
info->default_power3);
|
|
|
|
switch (rt2x00dev->chip.rt) {
|
|
case RT3883:
|
|
rt3883_bbp_adjust(rt2x00dev, rf);
|
|
break;
|
|
}
|
|
|
|
switch (rt2x00dev->chip.rf) {
|
|
case RF2020:
|
|
case RF3020:
|
|
case RF3021:
|
|
case RF3022:
|
|
case RF3320:
|
|
rt2800_config_channel_rf3xxx(rt2x00dev, conf, rf, info);
|
|
break;
|
|
case RF3052:
|
|
rt2800_config_channel_rf3052(rt2x00dev, conf, rf, info);
|
|
break;
|
|
case RF3053:
|
|
rt2800_config_channel_rf3053(rt2x00dev, conf, rf, info);
|
|
break;
|
|
case RF3290:
|
|
rt2800_config_channel_rf3290(rt2x00dev, conf, rf, info);
|
|
break;
|
|
case RF3322:
|
|
rt2800_config_channel_rf3322(rt2x00dev, conf, rf, info);
|
|
break;
|
|
case RF3853:
|
|
rt2800_config_channel_rf3853(rt2x00dev, conf, rf, info);
|
|
break;
|
|
case RF3070:
|
|
case RF5350:
|
|
case RF5360:
|
|
case RF5362:
|
|
case RF5370:
|
|
case RF5372:
|
|
case RF5390:
|
|
case RF5392:
|
|
rt2800_config_channel_rf53xx(rt2x00dev, conf, rf, info);
|
|
break;
|
|
case RF5592:
|
|
rt2800_config_channel_rf55xx(rt2x00dev, conf, rf, info);
|
|
break;
|
|
case RF7620:
|
|
rt2800_config_channel_rf7620(rt2x00dev, conf, rf, info);
|
|
break;
|
|
default:
|
|
rt2800_config_channel_rf2xxx(rt2x00dev, conf, rf, info);
|
|
}
|
|
|
|
if (rt2x00_rf(rt2x00dev, RF3070) ||
|
|
rt2x00_rf(rt2x00dev, RF3290) ||
|
|
rt2x00_rf(rt2x00dev, RF3322) ||
|
|
rt2x00_rf(rt2x00dev, RF5350) ||
|
|
rt2x00_rf(rt2x00dev, RF5360) ||
|
|
rt2x00_rf(rt2x00dev, RF5362) ||
|
|
rt2x00_rf(rt2x00dev, RF5370) ||
|
|
rt2x00_rf(rt2x00dev, RF5372) ||
|
|
rt2x00_rf(rt2x00dev, RF5390) ||
|
|
rt2x00_rf(rt2x00dev, RF5392)) {
|
|
rfcsr = rt2800_rfcsr_read(rt2x00dev, 30);
|
|
if (rt2x00_rf(rt2x00dev, RF3322)) {
|
|
rt2x00_set_field8(&rfcsr, RF3322_RFCSR30_TX_H20M,
|
|
conf_is_ht40(conf));
|
|
rt2x00_set_field8(&rfcsr, RF3322_RFCSR30_RX_H20M,
|
|
conf_is_ht40(conf));
|
|
} else {
|
|
rt2x00_set_field8(&rfcsr, RFCSR30_TX_H20M,
|
|
conf_is_ht40(conf));
|
|
rt2x00_set_field8(&rfcsr, RFCSR30_RX_H20M,
|
|
conf_is_ht40(conf));
|
|
}
|
|
rt2800_rfcsr_write(rt2x00dev, 30, rfcsr);
|
|
|
|
rfcsr = rt2800_rfcsr_read(rt2x00dev, 3);
|
|
rt2x00_set_field8(&rfcsr, RFCSR3_VCOCAL_EN, 1);
|
|
rt2800_rfcsr_write(rt2x00dev, 3, rfcsr);
|
|
}
|
|
|
|
/*
|
|
* Change BBP settings
|
|
*/
|
|
|
|
if (rt2x00_rt(rt2x00dev, RT3352)) {
|
|
rt2800_bbp_write(rt2x00dev, 62, 0x37 - rt2x00dev->lna_gain);
|
|
rt2800_bbp_write(rt2x00dev, 63, 0x37 - rt2x00dev->lna_gain);
|
|
rt2800_bbp_write(rt2x00dev, 64, 0x37 - rt2x00dev->lna_gain);
|
|
|
|
rt2800_bbp_write(rt2x00dev, 27, 0x0);
|
|
rt2800_bbp_write(rt2x00dev, 66, 0x26 + rt2x00dev->lna_gain);
|
|
rt2800_bbp_write(rt2x00dev, 27, 0x20);
|
|
rt2800_bbp_write(rt2x00dev, 66, 0x26 + rt2x00dev->lna_gain);
|
|
rt2800_bbp_write(rt2x00dev, 86, 0x38);
|
|
rt2800_bbp_write(rt2x00dev, 83, 0x6a);
|
|
} else if (rt2x00_rt(rt2x00dev, RT3593)) {
|
|
if (rf->channel > 14) {
|
|
/* Disable CCK Packet detection on 5GHz */
|
|
rt2800_bbp_write(rt2x00dev, 70, 0x00);
|
|
} else {
|
|
rt2800_bbp_write(rt2x00dev, 70, 0x0a);
|
|
}
|
|
|
|
if (conf_is_ht40(conf))
|
|
rt2800_bbp_write(rt2x00dev, 105, 0x04);
|
|
else
|
|
rt2800_bbp_write(rt2x00dev, 105, 0x34);
|
|
|
|
rt2800_bbp_write(rt2x00dev, 62, 0x37 - rt2x00dev->lna_gain);
|
|
rt2800_bbp_write(rt2x00dev, 63, 0x37 - rt2x00dev->lna_gain);
|
|
rt2800_bbp_write(rt2x00dev, 64, 0x37 - rt2x00dev->lna_gain);
|
|
rt2800_bbp_write(rt2x00dev, 77, 0x98);
|
|
} else if (rt2x00_rt(rt2x00dev, RT3883)) {
|
|
rt2800_bbp_write(rt2x00dev, 62, 0x37 - rt2x00dev->lna_gain);
|
|
rt2800_bbp_write(rt2x00dev, 63, 0x37 - rt2x00dev->lna_gain);
|
|
rt2800_bbp_write(rt2x00dev, 64, 0x37 - rt2x00dev->lna_gain);
|
|
|
|
if (rt2x00dev->default_ant.rx_chain_num > 1)
|
|
rt2800_bbp_write(rt2x00dev, 86, 0x46);
|
|
else
|
|
rt2800_bbp_write(rt2x00dev, 86, 0);
|
|
} else {
|
|
rt2800_bbp_write(rt2x00dev, 62, 0x37 - rt2x00dev->lna_gain);
|
|
rt2800_bbp_write(rt2x00dev, 63, 0x37 - rt2x00dev->lna_gain);
|
|
rt2800_bbp_write(rt2x00dev, 64, 0x37 - rt2x00dev->lna_gain);
|
|
if (rt2x00_rt(rt2x00dev, RT6352))
|
|
rt2800_bbp_write(rt2x00dev, 86, 0x38);
|
|
else
|
|
rt2800_bbp_write(rt2x00dev, 86, 0);
|
|
}
|
|
|
|
if (rf->channel <= 14) {
|
|
if (!rt2x00_rt(rt2x00dev, RT5390) &&
|
|
!rt2x00_rt(rt2x00dev, RT5392) &&
|
|
!rt2x00_rt(rt2x00dev, RT6352)) {
|
|
if (rt2x00_has_cap_external_lna_bg(rt2x00dev)) {
|
|
rt2800_bbp_write(rt2x00dev, 82, 0x62);
|
|
rt2800_bbp_write(rt2x00dev, 82, 0x62);
|
|
rt2800_bbp_write(rt2x00dev, 75, 0x46);
|
|
} else {
|
|
if (rt2x00_rt(rt2x00dev, RT3593))
|
|
rt2800_bbp_write(rt2x00dev, 82, 0x62);
|
|
else
|
|
rt2800_bbp_write(rt2x00dev, 82, 0x84);
|
|
rt2800_bbp_write(rt2x00dev, 75, 0x50);
|
|
}
|
|
if (rt2x00_rt(rt2x00dev, RT3593) ||
|
|
rt2x00_rt(rt2x00dev, RT3883))
|
|
rt2800_bbp_write(rt2x00dev, 83, 0x8a);
|
|
}
|
|
|
|
} else {
|
|
if (rt2x00_rt(rt2x00dev, RT3572))
|
|
rt2800_bbp_write(rt2x00dev, 82, 0x94);
|
|
else if (rt2x00_rt(rt2x00dev, RT3593) ||
|
|
rt2x00_rt(rt2x00dev, RT3883))
|
|
rt2800_bbp_write(rt2x00dev, 82, 0x82);
|
|
else if (!rt2x00_rt(rt2x00dev, RT6352))
|
|
rt2800_bbp_write(rt2x00dev, 82, 0xf2);
|
|
|
|
if (rt2x00_rt(rt2x00dev, RT3593) ||
|
|
rt2x00_rt(rt2x00dev, RT3883))
|
|
rt2800_bbp_write(rt2x00dev, 83, 0x9a);
|
|
|
|
if (rt2x00_has_cap_external_lna_a(rt2x00dev))
|
|
rt2800_bbp_write(rt2x00dev, 75, 0x46);
|
|
else
|
|
rt2800_bbp_write(rt2x00dev, 75, 0x50);
|
|
}
|
|
|
|
reg = rt2800_register_read(rt2x00dev, TX_BAND_CFG);
|
|
rt2x00_set_field32(®, TX_BAND_CFG_HT40_MINUS, conf_is_ht40_minus(conf));
|
|
rt2x00_set_field32(®, TX_BAND_CFG_A, rf->channel > 14);
|
|
rt2x00_set_field32(®, TX_BAND_CFG_BG, rf->channel <= 14);
|
|
rt2800_register_write(rt2x00dev, TX_BAND_CFG, reg);
|
|
|
|
if (rt2x00_rt(rt2x00dev, RT3572))
|
|
rt2800_rfcsr_write(rt2x00dev, 8, 0);
|
|
|
|
if (rt2x00_rt(rt2x00dev, RT6352)) {
|
|
tx_pin = rt2800_register_read(rt2x00dev, TX_PIN_CFG);
|
|
rt2x00_set_field32(&tx_pin, TX_PIN_CFG_RFRX_EN, 1);
|
|
} else {
|
|
tx_pin = 0;
|
|
}
|
|
|
|
switch (rt2x00dev->default_ant.tx_chain_num) {
|
|
case 3:
|
|
/* Turn on tertiary PAs */
|
|
rt2x00_set_field32(&tx_pin, TX_PIN_CFG_PA_PE_A2_EN,
|
|
rf->channel > 14);
|
|
rt2x00_set_field32(&tx_pin, TX_PIN_CFG_PA_PE_G2_EN,
|
|
rf->channel <= 14);
|
|
fallthrough;
|
|
case 2:
|
|
/* Turn on secondary PAs */
|
|
rt2x00_set_field32(&tx_pin, TX_PIN_CFG_PA_PE_A1_EN,
|
|
rf->channel > 14);
|
|
rt2x00_set_field32(&tx_pin, TX_PIN_CFG_PA_PE_G1_EN,
|
|
rf->channel <= 14);
|
|
fallthrough;
|
|
case 1:
|
|
/* Turn on primary PAs */
|
|
rt2x00_set_field32(&tx_pin, TX_PIN_CFG_PA_PE_A0_EN,
|
|
rf->channel > 14);
|
|
if (rt2x00_has_cap_bt_coexist(rt2x00dev))
|
|
rt2x00_set_field32(&tx_pin, TX_PIN_CFG_PA_PE_G0_EN, 1);
|
|
else
|
|
rt2x00_set_field32(&tx_pin, TX_PIN_CFG_PA_PE_G0_EN,
|
|
rf->channel <= 14);
|
|
break;
|
|
}
|
|
|
|
switch (rt2x00dev->default_ant.rx_chain_num) {
|
|
case 3:
|
|
/* Turn on tertiary LNAs */
|
|
rt2x00_set_field32(&tx_pin, TX_PIN_CFG_LNA_PE_A2_EN, 1);
|
|
rt2x00_set_field32(&tx_pin, TX_PIN_CFG_LNA_PE_G2_EN, 1);
|
|
fallthrough;
|
|
case 2:
|
|
/* Turn on secondary LNAs */
|
|
rt2x00_set_field32(&tx_pin, TX_PIN_CFG_LNA_PE_A1_EN, 1);
|
|
rt2x00_set_field32(&tx_pin, TX_PIN_CFG_LNA_PE_G1_EN, 1);
|
|
fallthrough;
|
|
case 1:
|
|
/* Turn on primary LNAs */
|
|
rt2x00_set_field32(&tx_pin, TX_PIN_CFG_LNA_PE_A0_EN, 1);
|
|
rt2x00_set_field32(&tx_pin, TX_PIN_CFG_LNA_PE_G0_EN, 1);
|
|
break;
|
|
}
|
|
|
|
rt2x00_set_field32(&tx_pin, TX_PIN_CFG_RFTR_EN, 1);
|
|
rt2x00_set_field32(&tx_pin, TX_PIN_CFG_TRSW_EN, 1);
|
|
|
|
rt2800_register_write(rt2x00dev, TX_PIN_CFG, tx_pin);
|
|
|
|
if (rt2x00_rt(rt2x00dev, RT3572)) {
|
|
rt2800_rfcsr_write(rt2x00dev, 8, 0x80);
|
|
|
|
/* AGC init */
|
|
if (rf->channel <= 14)
|
|
reg = 0x1c + (2 * rt2x00dev->lna_gain);
|
|
else
|
|
reg = 0x22 + ((rt2x00dev->lna_gain * 5) / 3);
|
|
|
|
rt2800_bbp_write_with_rx_chain(rt2x00dev, 66, reg);
|
|
}
|
|
|
|
if (rt2x00_rt(rt2x00dev, RT3593)) {
|
|
reg = rt2800_register_read(rt2x00dev, GPIO_CTRL);
|
|
|
|
/* Band selection */
|
|
if (rt2x00_is_usb(rt2x00dev) ||
|
|
rt2x00_is_pcie(rt2x00dev)) {
|
|
/* GPIO #8 controls all paths */
|
|
rt2x00_set_field32(®, GPIO_CTRL_DIR8, 0);
|
|
if (rf->channel <= 14)
|
|
rt2x00_set_field32(®, GPIO_CTRL_VAL8, 1);
|
|
else
|
|
rt2x00_set_field32(®, GPIO_CTRL_VAL8, 0);
|
|
}
|
|
|
|
/* LNA PE control. */
|
|
if (rt2x00_is_usb(rt2x00dev)) {
|
|
/* GPIO #4 controls PE0 and PE1,
|
|
* GPIO #7 controls PE2
|
|
*/
|
|
rt2x00_set_field32(®, GPIO_CTRL_DIR4, 0);
|
|
rt2x00_set_field32(®, GPIO_CTRL_DIR7, 0);
|
|
|
|
rt2x00_set_field32(®, GPIO_CTRL_VAL4, 1);
|
|
rt2x00_set_field32(®, GPIO_CTRL_VAL7, 1);
|
|
} else if (rt2x00_is_pcie(rt2x00dev)) {
|
|
/* GPIO #4 controls PE0, PE1 and PE2 */
|
|
rt2x00_set_field32(®, GPIO_CTRL_DIR4, 0);
|
|
rt2x00_set_field32(®, GPIO_CTRL_VAL4, 1);
|
|
}
|
|
|
|
rt2800_register_write(rt2x00dev, GPIO_CTRL, reg);
|
|
|
|
/* AGC init */
|
|
if (rf->channel <= 14)
|
|
reg = 0x1c + 2 * rt2x00dev->lna_gain;
|
|
else
|
|
reg = 0x22 + ((rt2x00dev->lna_gain * 5) / 3);
|
|
|
|
rt2800_bbp_write_with_rx_chain(rt2x00dev, 66, reg);
|
|
|
|
usleep_range(1000, 1500);
|
|
}
|
|
|
|
if (rt2x00_rt(rt2x00dev, RT3883)) {
|
|
if (!conf_is_ht40(conf))
|
|
rt2800_bbp_write(rt2x00dev, 105, 0x34);
|
|
else
|
|
rt2800_bbp_write(rt2x00dev, 105, 0x04);
|
|
|
|
/* AGC init */
|
|
if (rf->channel <= 14)
|
|
reg = 0x2e + rt2x00dev->lna_gain;
|
|
else
|
|
reg = 0x20 + ((rt2x00dev->lna_gain * 5) / 3);
|
|
|
|
rt2800_bbp_write_with_rx_chain(rt2x00dev, 66, reg);
|
|
|
|
usleep_range(1000, 1500);
|
|
}
|
|
|
|
if (rt2x00_rt(rt2x00dev, RT5592) || rt2x00_rt(rt2x00dev, RT6352)) {
|
|
reg = 0x10;
|
|
if (!conf_is_ht40(conf)) {
|
|
if (rt2x00_rt(rt2x00dev, RT6352) &&
|
|
rt2x00_has_cap_external_lna_bg(rt2x00dev)) {
|
|
reg |= 0x5;
|
|
} else {
|
|
reg |= 0xa;
|
|
}
|
|
}
|
|
rt2800_bbp_write(rt2x00dev, 195, 141);
|
|
rt2800_bbp_write(rt2x00dev, 196, reg);
|
|
|
|
/* AGC init.
|
|
* Despite the vendor driver using different values here for
|
|
* RT6352 chip, we use 0x1c for now. This may have to be changed
|
|
* once TSSI got implemented.
|
|
*/
|
|
reg = (rf->channel <= 14 ? 0x1c : 0x24) + 2*rt2x00dev->lna_gain;
|
|
rt2800_bbp_write_with_rx_chain(rt2x00dev, 66, reg);
|
|
|
|
if (rt2x00_rt(rt2x00dev, RT5592))
|
|
rt2800_iq_calibrate(rt2x00dev, rf->channel);
|
|
}
|
|
|
|
if (rt2x00_rt(rt2x00dev, RT6352)) {
|
|
if (test_bit(CAPABILITY_EXTERNAL_PA_TX0,
|
|
&rt2x00dev->cap_flags)) {
|
|
reg = rt2800_register_read(rt2x00dev, RF_CONTROL3);
|
|
reg |= 0x00000101;
|
|
rt2800_register_write(rt2x00dev, RF_CONTROL3, reg);
|
|
|
|
reg = rt2800_register_read(rt2x00dev, RF_BYPASS3);
|
|
reg |= 0x00000101;
|
|
rt2800_register_write(rt2x00dev, RF_BYPASS3, reg);
|
|
|
|
rt2800_rfcsr_write_chanreg(rt2x00dev, 43, 0x73);
|
|
rt2800_rfcsr_write_chanreg(rt2x00dev, 44, 0x73);
|
|
rt2800_rfcsr_write_chanreg(rt2x00dev, 45, 0x73);
|
|
rt2800_rfcsr_write_chanreg(rt2x00dev, 46, 0x27);
|
|
rt2800_rfcsr_write_chanreg(rt2x00dev, 47, 0xC8);
|
|
rt2800_rfcsr_write_chanreg(rt2x00dev, 48, 0xA4);
|
|
rt2800_rfcsr_write_chanreg(rt2x00dev, 49, 0x05);
|
|
rt2800_rfcsr_write_chanreg(rt2x00dev, 54, 0x27);
|
|
rt2800_rfcsr_write_chanreg(rt2x00dev, 55, 0xC8);
|
|
rt2800_rfcsr_write_chanreg(rt2x00dev, 56, 0xA4);
|
|
rt2800_rfcsr_write_chanreg(rt2x00dev, 57, 0x05);
|
|
rt2800_rfcsr_write_chanreg(rt2x00dev, 58, 0x27);
|
|
rt2800_rfcsr_write_chanreg(rt2x00dev, 59, 0xC8);
|
|
rt2800_rfcsr_write_chanreg(rt2x00dev, 60, 0xA4);
|
|
rt2800_rfcsr_write_chanreg(rt2x00dev, 61, 0x05);
|
|
rt2800_rfcsr_write_dccal(rt2x00dev, 05, 0x00);
|
|
|
|
rt2800_register_write(rt2x00dev, TX0_RF_GAIN_CORRECT,
|
|
0x36303636);
|
|
rt2800_register_write(rt2x00dev, TX0_RF_GAIN_ATTEN,
|
|
0x6C6C6B6C);
|
|
rt2800_register_write(rt2x00dev, TX1_RF_GAIN_ATTEN,
|
|
0x6C6C6B6C);
|
|
}
|
|
}
|
|
|
|
bbp = rt2800_bbp_read(rt2x00dev, 4);
|
|
rt2x00_set_field8(&bbp, BBP4_BANDWIDTH, 2 * conf_is_ht40(conf));
|
|
rt2800_bbp_write(rt2x00dev, 4, bbp);
|
|
|
|
bbp = rt2800_bbp_read(rt2x00dev, 3);
|
|
rt2x00_set_field8(&bbp, BBP3_HT40_MINUS, conf_is_ht40_minus(conf));
|
|
rt2800_bbp_write(rt2x00dev, 3, bbp);
|
|
|
|
if (rt2x00_rt_rev(rt2x00dev, RT2860, REV_RT2860C)) {
|
|
if (conf_is_ht40(conf)) {
|
|
rt2800_bbp_write(rt2x00dev, 69, 0x1a);
|
|
rt2800_bbp_write(rt2x00dev, 70, 0x0a);
|
|
rt2800_bbp_write(rt2x00dev, 73, 0x16);
|
|
} else {
|
|
rt2800_bbp_write(rt2x00dev, 69, 0x16);
|
|
rt2800_bbp_write(rt2x00dev, 70, 0x08);
|
|
rt2800_bbp_write(rt2x00dev, 73, 0x11);
|
|
}
|
|
}
|
|
|
|
usleep_range(1000, 1500);
|
|
|
|
/*
|
|
* Clear channel statistic counters
|
|
*/
|
|
reg = rt2800_register_read(rt2x00dev, CH_IDLE_STA);
|
|
reg = rt2800_register_read(rt2x00dev, CH_BUSY_STA);
|
|
reg = rt2800_register_read(rt2x00dev, CH_BUSY_STA_SEC);
|
|
|
|
/*
|
|
* Clear update flag
|
|
*/
|
|
if (rt2x00_rt(rt2x00dev, RT3352) ||
|
|
rt2x00_rt(rt2x00dev, RT5350)) {
|
|
bbp = rt2800_bbp_read(rt2x00dev, 49);
|
|
rt2x00_set_field8(&bbp, BBP49_UPDATE_FLAG, 0);
|
|
rt2800_bbp_write(rt2x00dev, 49, bbp);
|
|
}
|
|
}
|
|
|
|
static int rt2800_get_gain_calibration_delta(struct rt2x00_dev *rt2x00dev)
|
|
{
|
|
u8 tssi_bounds[9];
|
|
u8 current_tssi;
|
|
u16 eeprom;
|
|
u8 step;
|
|
int i;
|
|
|
|
/*
|
|
* First check if temperature compensation is supported.
|
|
*/
|
|
eeprom = rt2800_eeprom_read(rt2x00dev, EEPROM_NIC_CONF1);
|
|
if (!rt2x00_get_field16(eeprom, EEPROM_NIC_CONF1_EXTERNAL_TX_ALC))
|
|
return 0;
|
|
|
|
/*
|
|
* Read TSSI boundaries for temperature compensation from
|
|
* the EEPROM.
|
|
*
|
|
* Array idx 0 1 2 3 4 5 6 7 8
|
|
* Matching Delta value -4 -3 -2 -1 0 +1 +2 +3 +4
|
|
* Example TSSI bounds 0xF0 0xD0 0xB5 0xA0 0x88 0x45 0x25 0x15 0x00
|
|
*/
|
|
if (rt2x00dev->curr_band == NL80211_BAND_2GHZ) {
|
|
eeprom = rt2800_eeprom_read(rt2x00dev, EEPROM_TSSI_BOUND_BG1);
|
|
tssi_bounds[0] = rt2x00_get_field16(eeprom,
|
|
EEPROM_TSSI_BOUND_BG1_MINUS4);
|
|
tssi_bounds[1] = rt2x00_get_field16(eeprom,
|
|
EEPROM_TSSI_BOUND_BG1_MINUS3);
|
|
|
|
eeprom = rt2800_eeprom_read(rt2x00dev, EEPROM_TSSI_BOUND_BG2);
|
|
tssi_bounds[2] = rt2x00_get_field16(eeprom,
|
|
EEPROM_TSSI_BOUND_BG2_MINUS2);
|
|
tssi_bounds[3] = rt2x00_get_field16(eeprom,
|
|
EEPROM_TSSI_BOUND_BG2_MINUS1);
|
|
|
|
eeprom = rt2800_eeprom_read(rt2x00dev, EEPROM_TSSI_BOUND_BG3);
|
|
tssi_bounds[4] = rt2x00_get_field16(eeprom,
|
|
EEPROM_TSSI_BOUND_BG3_REF);
|
|
tssi_bounds[5] = rt2x00_get_field16(eeprom,
|
|
EEPROM_TSSI_BOUND_BG3_PLUS1);
|
|
|
|
eeprom = rt2800_eeprom_read(rt2x00dev, EEPROM_TSSI_BOUND_BG4);
|
|
tssi_bounds[6] = rt2x00_get_field16(eeprom,
|
|
EEPROM_TSSI_BOUND_BG4_PLUS2);
|
|
tssi_bounds[7] = rt2x00_get_field16(eeprom,
|
|
EEPROM_TSSI_BOUND_BG4_PLUS3);
|
|
|
|
eeprom = rt2800_eeprom_read(rt2x00dev, EEPROM_TSSI_BOUND_BG5);
|
|
tssi_bounds[8] = rt2x00_get_field16(eeprom,
|
|
EEPROM_TSSI_BOUND_BG5_PLUS4);
|
|
|
|
step = rt2x00_get_field16(eeprom,
|
|
EEPROM_TSSI_BOUND_BG5_AGC_STEP);
|
|
} else {
|
|
eeprom = rt2800_eeprom_read(rt2x00dev, EEPROM_TSSI_BOUND_A1);
|
|
tssi_bounds[0] = rt2x00_get_field16(eeprom,
|
|
EEPROM_TSSI_BOUND_A1_MINUS4);
|
|
tssi_bounds[1] = rt2x00_get_field16(eeprom,
|
|
EEPROM_TSSI_BOUND_A1_MINUS3);
|
|
|
|
eeprom = rt2800_eeprom_read(rt2x00dev, EEPROM_TSSI_BOUND_A2);
|
|
tssi_bounds[2] = rt2x00_get_field16(eeprom,
|
|
EEPROM_TSSI_BOUND_A2_MINUS2);
|
|
tssi_bounds[3] = rt2x00_get_field16(eeprom,
|
|
EEPROM_TSSI_BOUND_A2_MINUS1);
|
|
|
|
eeprom = rt2800_eeprom_read(rt2x00dev, EEPROM_TSSI_BOUND_A3);
|
|
tssi_bounds[4] = rt2x00_get_field16(eeprom,
|
|
EEPROM_TSSI_BOUND_A3_REF);
|
|
tssi_bounds[5] = rt2x00_get_field16(eeprom,
|
|
EEPROM_TSSI_BOUND_A3_PLUS1);
|
|
|
|
eeprom = rt2800_eeprom_read(rt2x00dev, EEPROM_TSSI_BOUND_A4);
|
|
tssi_bounds[6] = rt2x00_get_field16(eeprom,
|
|
EEPROM_TSSI_BOUND_A4_PLUS2);
|
|
tssi_bounds[7] = rt2x00_get_field16(eeprom,
|
|
EEPROM_TSSI_BOUND_A4_PLUS3);
|
|
|
|
eeprom = rt2800_eeprom_read(rt2x00dev, EEPROM_TSSI_BOUND_A5);
|
|
tssi_bounds[8] = rt2x00_get_field16(eeprom,
|
|
EEPROM_TSSI_BOUND_A5_PLUS4);
|
|
|
|
step = rt2x00_get_field16(eeprom,
|
|
EEPROM_TSSI_BOUND_A5_AGC_STEP);
|
|
}
|
|
|
|
/*
|
|
* Check if temperature compensation is supported.
|
|
*/
|
|
if (tssi_bounds[4] == 0xff || step == 0xff)
|
|
return 0;
|
|
|
|
/*
|
|
* Read current TSSI (BBP 49).
|
|
*/
|
|
current_tssi = rt2800_bbp_read(rt2x00dev, 49);
|
|
|
|
/*
|
|
* Compare TSSI value (BBP49) with the compensation boundaries
|
|
* from the EEPROM and increase or decrease tx power.
|
|
*/
|
|
for (i = 0; i <= 3; i++) {
|
|
if (current_tssi > tssi_bounds[i])
|
|
break;
|
|
}
|
|
|
|
if (i == 4) {
|
|
for (i = 8; i >= 5; i--) {
|
|
if (current_tssi < tssi_bounds[i])
|
|
break;
|
|
}
|
|
}
|
|
|
|
return (i - 4) * step;
|
|
}
|
|
|
|
static int rt2800_get_txpower_bw_comp(struct rt2x00_dev *rt2x00dev,
|
|
enum nl80211_band band)
|
|
{
|
|
u16 eeprom;
|
|
u8 comp_en;
|
|
u8 comp_type;
|
|
int comp_value = 0;
|
|
|
|
eeprom = rt2800_eeprom_read(rt2x00dev, EEPROM_TXPOWER_DELTA);
|
|
|
|
/*
|
|
* HT40 compensation not required.
|
|
*/
|
|
if (eeprom == 0xffff ||
|
|
!test_bit(CONFIG_CHANNEL_HT40, &rt2x00dev->flags))
|
|
return 0;
|
|
|
|
if (band == NL80211_BAND_2GHZ) {
|
|
comp_en = rt2x00_get_field16(eeprom,
|
|
EEPROM_TXPOWER_DELTA_ENABLE_2G);
|
|
if (comp_en) {
|
|
comp_type = rt2x00_get_field16(eeprom,
|
|
EEPROM_TXPOWER_DELTA_TYPE_2G);
|
|
comp_value = rt2x00_get_field16(eeprom,
|
|
EEPROM_TXPOWER_DELTA_VALUE_2G);
|
|
if (!comp_type)
|
|
comp_value = -comp_value;
|
|
}
|
|
} else {
|
|
comp_en = rt2x00_get_field16(eeprom,
|
|
EEPROM_TXPOWER_DELTA_ENABLE_5G);
|
|
if (comp_en) {
|
|
comp_type = rt2x00_get_field16(eeprom,
|
|
EEPROM_TXPOWER_DELTA_TYPE_5G);
|
|
comp_value = rt2x00_get_field16(eeprom,
|
|
EEPROM_TXPOWER_DELTA_VALUE_5G);
|
|
if (!comp_type)
|
|
comp_value = -comp_value;
|
|
}
|
|
}
|
|
|
|
return comp_value;
|
|
}
|
|
|
|
static int rt2800_get_txpower_reg_delta(struct rt2x00_dev *rt2x00dev,
|
|
int power_level, int max_power)
|
|
{
|
|
int delta;
|
|
|
|
if (rt2x00_has_cap_power_limit(rt2x00dev))
|
|
return 0;
|
|
|
|
/*
|
|
* XXX: We don't know the maximum transmit power of our hardware since
|
|
* the EEPROM doesn't expose it. We only know that we are calibrated
|
|
* to 100% tx power.
|
|
*
|
|
* Hence, we assume the regulatory limit that cfg80211 calulated for
|
|
* the current channel is our maximum and if we are requested to lower
|
|
* the value we just reduce our tx power accordingly.
|
|
*/
|
|
delta = power_level - max_power;
|
|
return min(delta, 0);
|
|
}
|
|
|
|
static u8 rt2800_compensate_txpower(struct rt2x00_dev *rt2x00dev, int is_rate_b,
|
|
enum nl80211_band band, int power_level,
|
|
u8 txpower, int delta)
|
|
{
|
|
u16 eeprom;
|
|
u8 criterion;
|
|
u8 eirp_txpower;
|
|
u8 eirp_txpower_criterion;
|
|
u8 reg_limit;
|
|
|
|
if (rt2x00_rt(rt2x00dev, RT3593))
|
|
return min_t(u8, txpower, 0xc);
|
|
|
|
if (rt2x00_rt(rt2x00dev, RT3883))
|
|
return min_t(u8, txpower, 0xf);
|
|
|
|
if (rt2x00_has_cap_power_limit(rt2x00dev)) {
|
|
/*
|
|
* Check if eirp txpower exceed txpower_limit.
|
|
* We use OFDM 6M as criterion and its eirp txpower
|
|
* is stored at EEPROM_EIRP_MAX_TX_POWER.
|
|
* .11b data rate need add additional 4dbm
|
|
* when calculating eirp txpower.
|
|
*/
|
|
eeprom = rt2800_eeprom_read_from_array(rt2x00dev,
|
|
EEPROM_TXPOWER_BYRATE,
|
|
1);
|
|
criterion = rt2x00_get_field16(eeprom,
|
|
EEPROM_TXPOWER_BYRATE_RATE0);
|
|
|
|
eeprom = rt2800_eeprom_read(rt2x00dev, EEPROM_EIRP_MAX_TX_POWER);
|
|
|
|
if (band == NL80211_BAND_2GHZ)
|
|
eirp_txpower_criterion = rt2x00_get_field16(eeprom,
|
|
EEPROM_EIRP_MAX_TX_POWER_2GHZ);
|
|
else
|
|
eirp_txpower_criterion = rt2x00_get_field16(eeprom,
|
|
EEPROM_EIRP_MAX_TX_POWER_5GHZ);
|
|
|
|
eirp_txpower = eirp_txpower_criterion + (txpower - criterion) +
|
|
(is_rate_b ? 4 : 0) + delta;
|
|
|
|
reg_limit = (eirp_txpower > power_level) ?
|
|
(eirp_txpower - power_level) : 0;
|
|
} else
|
|
reg_limit = 0;
|
|
|
|
txpower = max(0, txpower + delta - reg_limit);
|
|
return min_t(u8, txpower, 0xc);
|
|
}
|
|
|
|
|
|
enum {
|
|
TX_PWR_CFG_0_IDX,
|
|
TX_PWR_CFG_1_IDX,
|
|
TX_PWR_CFG_2_IDX,
|
|
TX_PWR_CFG_3_IDX,
|
|
TX_PWR_CFG_4_IDX,
|
|
TX_PWR_CFG_5_IDX,
|
|
TX_PWR_CFG_6_IDX,
|
|
TX_PWR_CFG_7_IDX,
|
|
TX_PWR_CFG_8_IDX,
|
|
TX_PWR_CFG_9_IDX,
|
|
TX_PWR_CFG_0_EXT_IDX,
|
|
TX_PWR_CFG_1_EXT_IDX,
|
|
TX_PWR_CFG_2_EXT_IDX,
|
|
TX_PWR_CFG_3_EXT_IDX,
|
|
TX_PWR_CFG_4_EXT_IDX,
|
|
TX_PWR_CFG_IDX_COUNT,
|
|
};
|
|
|
|
static void rt2800_config_txpower_rt3593(struct rt2x00_dev *rt2x00dev,
|
|
struct ieee80211_channel *chan,
|
|
int power_level)
|
|
{
|
|
u8 txpower;
|
|
u16 eeprom;
|
|
u32 regs[TX_PWR_CFG_IDX_COUNT];
|
|
unsigned int offset;
|
|
enum nl80211_band band = chan->band;
|
|
int delta;
|
|
int i;
|
|
|
|
memset(regs, '\0', sizeof(regs));
|
|
|
|
/* TODO: adapt TX power reduction from the rt28xx code */
|
|
|
|
/* calculate temperature compensation delta */
|
|
delta = rt2800_get_gain_calibration_delta(rt2x00dev);
|
|
|
|
if (band == NL80211_BAND_5GHZ)
|
|
offset = 16;
|
|
else
|
|
offset = 0;
|
|
|
|
if (test_bit(CONFIG_CHANNEL_HT40, &rt2x00dev->flags))
|
|
offset += 8;
|
|
|
|
/* read the next four txpower values */
|
|
eeprom = rt2800_eeprom_read_from_array(rt2x00dev, EEPROM_TXPOWER_BYRATE,
|
|
offset);
|
|
|
|
/* CCK 1MBS,2MBS */
|
|
txpower = rt2x00_get_field16(eeprom, EEPROM_TXPOWER_BYRATE_RATE0);
|
|
txpower = rt2800_compensate_txpower(rt2x00dev, 1, band, power_level,
|
|
txpower, delta);
|
|
rt2x00_set_field32(®s[TX_PWR_CFG_0_IDX],
|
|
TX_PWR_CFG_0_CCK1_CH0, txpower);
|
|
rt2x00_set_field32(®s[TX_PWR_CFG_0_IDX],
|
|
TX_PWR_CFG_0_CCK1_CH1, txpower);
|
|
rt2x00_set_field32(®s[TX_PWR_CFG_0_EXT_IDX],
|
|
TX_PWR_CFG_0_EXT_CCK1_CH2, txpower);
|
|
|
|
/* CCK 5.5MBS,11MBS */
|
|
txpower = rt2x00_get_field16(eeprom, EEPROM_TXPOWER_BYRATE_RATE1);
|
|
txpower = rt2800_compensate_txpower(rt2x00dev, 1, band, power_level,
|
|
txpower, delta);
|
|
rt2x00_set_field32(®s[TX_PWR_CFG_0_IDX],
|
|
TX_PWR_CFG_0_CCK5_CH0, txpower);
|
|
rt2x00_set_field32(®s[TX_PWR_CFG_0_IDX],
|
|
TX_PWR_CFG_0_CCK5_CH1, txpower);
|
|
rt2x00_set_field32(®s[TX_PWR_CFG_0_EXT_IDX],
|
|
TX_PWR_CFG_0_EXT_CCK5_CH2, txpower);
|
|
|
|
/* OFDM 6MBS,9MBS */
|
|
txpower = rt2x00_get_field16(eeprom, EEPROM_TXPOWER_BYRATE_RATE2);
|
|
txpower = rt2800_compensate_txpower(rt2x00dev, 0, band, power_level,
|
|
txpower, delta);
|
|
rt2x00_set_field32(®s[TX_PWR_CFG_0_IDX],
|
|
TX_PWR_CFG_0_OFDM6_CH0, txpower);
|
|
rt2x00_set_field32(®s[TX_PWR_CFG_0_IDX],
|
|
TX_PWR_CFG_0_OFDM6_CH1, txpower);
|
|
rt2x00_set_field32(®s[TX_PWR_CFG_0_EXT_IDX],
|
|
TX_PWR_CFG_0_EXT_OFDM6_CH2, txpower);
|
|
|
|
/* OFDM 12MBS,18MBS */
|
|
txpower = rt2x00_get_field16(eeprom, EEPROM_TXPOWER_BYRATE_RATE3);
|
|
txpower = rt2800_compensate_txpower(rt2x00dev, 0, band, power_level,
|
|
txpower, delta);
|
|
rt2x00_set_field32(®s[TX_PWR_CFG_0_IDX],
|
|
TX_PWR_CFG_0_OFDM12_CH0, txpower);
|
|
rt2x00_set_field32(®s[TX_PWR_CFG_0_IDX],
|
|
TX_PWR_CFG_0_OFDM12_CH1, txpower);
|
|
rt2x00_set_field32(®s[TX_PWR_CFG_0_EXT_IDX],
|
|
TX_PWR_CFG_0_EXT_OFDM12_CH2, txpower);
|
|
|
|
/* read the next four txpower values */
|
|
eeprom = rt2800_eeprom_read_from_array(rt2x00dev, EEPROM_TXPOWER_BYRATE,
|
|
offset + 1);
|
|
|
|
/* OFDM 24MBS,36MBS */
|
|
txpower = rt2x00_get_field16(eeprom, EEPROM_TXPOWER_BYRATE_RATE0);
|
|
txpower = rt2800_compensate_txpower(rt2x00dev, 0, band, power_level,
|
|
txpower, delta);
|
|
rt2x00_set_field32(®s[TX_PWR_CFG_1_IDX],
|
|
TX_PWR_CFG_1_OFDM24_CH0, txpower);
|
|
rt2x00_set_field32(®s[TX_PWR_CFG_1_IDX],
|
|
TX_PWR_CFG_1_OFDM24_CH1, txpower);
|
|
rt2x00_set_field32(®s[TX_PWR_CFG_1_EXT_IDX],
|
|
TX_PWR_CFG_1_EXT_OFDM24_CH2, txpower);
|
|
|
|
/* OFDM 48MBS */
|
|
txpower = rt2x00_get_field16(eeprom, EEPROM_TXPOWER_BYRATE_RATE1);
|
|
txpower = rt2800_compensate_txpower(rt2x00dev, 0, band, power_level,
|
|
txpower, delta);
|
|
rt2x00_set_field32(®s[TX_PWR_CFG_1_IDX],
|
|
TX_PWR_CFG_1_OFDM48_CH0, txpower);
|
|
rt2x00_set_field32(®s[TX_PWR_CFG_1_IDX],
|
|
TX_PWR_CFG_1_OFDM48_CH1, txpower);
|
|
rt2x00_set_field32(®s[TX_PWR_CFG_1_EXT_IDX],
|
|
TX_PWR_CFG_1_EXT_OFDM48_CH2, txpower);
|
|
|
|
/* OFDM 54MBS */
|
|
txpower = rt2x00_get_field16(eeprom, EEPROM_TXPOWER_BYRATE_RATE2);
|
|
txpower = rt2800_compensate_txpower(rt2x00dev, 0, band, power_level,
|
|
txpower, delta);
|
|
rt2x00_set_field32(®s[TX_PWR_CFG_7_IDX],
|
|
TX_PWR_CFG_7_OFDM54_CH0, txpower);
|
|
rt2x00_set_field32(®s[TX_PWR_CFG_7_IDX],
|
|
TX_PWR_CFG_7_OFDM54_CH1, txpower);
|
|
rt2x00_set_field32(®s[TX_PWR_CFG_7_IDX],
|
|
TX_PWR_CFG_7_OFDM54_CH2, txpower);
|
|
|
|
/* read the next four txpower values */
|
|
eeprom = rt2800_eeprom_read_from_array(rt2x00dev, EEPROM_TXPOWER_BYRATE,
|
|
offset + 2);
|
|
|
|
/* MCS 0,1 */
|
|
txpower = rt2x00_get_field16(eeprom, EEPROM_TXPOWER_BYRATE_RATE0);
|
|
txpower = rt2800_compensate_txpower(rt2x00dev, 0, band, power_level,
|
|
txpower, delta);
|
|
rt2x00_set_field32(®s[TX_PWR_CFG_1_IDX],
|
|
TX_PWR_CFG_1_MCS0_CH0, txpower);
|
|
rt2x00_set_field32(®s[TX_PWR_CFG_1_IDX],
|
|
TX_PWR_CFG_1_MCS0_CH1, txpower);
|
|
rt2x00_set_field32(®s[TX_PWR_CFG_1_EXT_IDX],
|
|
TX_PWR_CFG_1_EXT_MCS0_CH2, txpower);
|
|
|
|
/* MCS 2,3 */
|
|
txpower = rt2x00_get_field16(eeprom, EEPROM_TXPOWER_BYRATE_RATE1);
|
|
txpower = rt2800_compensate_txpower(rt2x00dev, 0, band, power_level,
|
|
txpower, delta);
|
|
rt2x00_set_field32(®s[TX_PWR_CFG_1_IDX],
|
|
TX_PWR_CFG_1_MCS2_CH0, txpower);
|
|
rt2x00_set_field32(®s[TX_PWR_CFG_1_IDX],
|
|
TX_PWR_CFG_1_MCS2_CH1, txpower);
|
|
rt2x00_set_field32(®s[TX_PWR_CFG_1_EXT_IDX],
|
|
TX_PWR_CFG_1_EXT_MCS2_CH2, txpower);
|
|
|
|
/* MCS 4,5 */
|
|
txpower = rt2x00_get_field16(eeprom, EEPROM_TXPOWER_BYRATE_RATE2);
|
|
txpower = rt2800_compensate_txpower(rt2x00dev, 0, band, power_level,
|
|
txpower, delta);
|
|
rt2x00_set_field32(®s[TX_PWR_CFG_2_IDX],
|
|
TX_PWR_CFG_2_MCS4_CH0, txpower);
|
|
rt2x00_set_field32(®s[TX_PWR_CFG_2_IDX],
|
|
TX_PWR_CFG_2_MCS4_CH1, txpower);
|
|
rt2x00_set_field32(®s[TX_PWR_CFG_2_EXT_IDX],
|
|
TX_PWR_CFG_2_EXT_MCS4_CH2, txpower);
|
|
|
|
/* MCS 6 */
|
|
txpower = rt2x00_get_field16(eeprom, EEPROM_TXPOWER_BYRATE_RATE3);
|
|
txpower = rt2800_compensate_txpower(rt2x00dev, 0, band, power_level,
|
|
txpower, delta);
|
|
rt2x00_set_field32(®s[TX_PWR_CFG_2_IDX],
|
|
TX_PWR_CFG_2_MCS6_CH0, txpower);
|
|
rt2x00_set_field32(®s[TX_PWR_CFG_2_IDX],
|
|
TX_PWR_CFG_2_MCS6_CH1, txpower);
|
|
rt2x00_set_field32(®s[TX_PWR_CFG_2_EXT_IDX],
|
|
TX_PWR_CFG_2_EXT_MCS6_CH2, txpower);
|
|
|
|
/* read the next four txpower values */
|
|
eeprom = rt2800_eeprom_read_from_array(rt2x00dev, EEPROM_TXPOWER_BYRATE,
|
|
offset + 3);
|
|
|
|
/* MCS 7 */
|
|
txpower = rt2x00_get_field16(eeprom, EEPROM_TXPOWER_BYRATE_RATE0);
|
|
txpower = rt2800_compensate_txpower(rt2x00dev, 0, band, power_level,
|
|
txpower, delta);
|
|
rt2x00_set_field32(®s[TX_PWR_CFG_7_IDX],
|
|
TX_PWR_CFG_7_MCS7_CH0, txpower);
|
|
rt2x00_set_field32(®s[TX_PWR_CFG_7_IDX],
|
|
TX_PWR_CFG_7_MCS7_CH1, txpower);
|
|
rt2x00_set_field32(®s[TX_PWR_CFG_7_IDX],
|
|
TX_PWR_CFG_7_MCS7_CH2, txpower);
|
|
|
|
/* MCS 8,9 */
|
|
txpower = rt2x00_get_field16(eeprom, EEPROM_TXPOWER_BYRATE_RATE1);
|
|
txpower = rt2800_compensate_txpower(rt2x00dev, 0, band, power_level,
|
|
txpower, delta);
|
|
rt2x00_set_field32(®s[TX_PWR_CFG_2_IDX],
|
|
TX_PWR_CFG_2_MCS8_CH0, txpower);
|
|
rt2x00_set_field32(®s[TX_PWR_CFG_2_IDX],
|
|
TX_PWR_CFG_2_MCS8_CH1, txpower);
|
|
rt2x00_set_field32(®s[TX_PWR_CFG_2_EXT_IDX],
|
|
TX_PWR_CFG_2_EXT_MCS8_CH2, txpower);
|
|
|
|
/* MCS 10,11 */
|
|
txpower = rt2x00_get_field16(eeprom, EEPROM_TXPOWER_BYRATE_RATE2);
|
|
txpower = rt2800_compensate_txpower(rt2x00dev, 0, band, power_level,
|
|
txpower, delta);
|
|
rt2x00_set_field32(®s[TX_PWR_CFG_2_IDX],
|
|
TX_PWR_CFG_2_MCS10_CH0, txpower);
|
|
rt2x00_set_field32(®s[TX_PWR_CFG_2_IDX],
|
|
TX_PWR_CFG_2_MCS10_CH1, txpower);
|
|
rt2x00_set_field32(®s[TX_PWR_CFG_2_EXT_IDX],
|
|
TX_PWR_CFG_2_EXT_MCS10_CH2, txpower);
|
|
|
|
/* MCS 12,13 */
|
|
txpower = rt2x00_get_field16(eeprom, EEPROM_TXPOWER_BYRATE_RATE3);
|
|
txpower = rt2800_compensate_txpower(rt2x00dev, 0, band, power_level,
|
|
txpower, delta);
|
|
rt2x00_set_field32(®s[TX_PWR_CFG_3_IDX],
|
|
TX_PWR_CFG_3_MCS12_CH0, txpower);
|
|
rt2x00_set_field32(®s[TX_PWR_CFG_3_IDX],
|
|
TX_PWR_CFG_3_MCS12_CH1, txpower);
|
|
rt2x00_set_field32(®s[TX_PWR_CFG_3_EXT_IDX],
|
|
TX_PWR_CFG_3_EXT_MCS12_CH2, txpower);
|
|
|
|
/* read the next four txpower values */
|
|
eeprom = rt2800_eeprom_read_from_array(rt2x00dev, EEPROM_TXPOWER_BYRATE,
|
|
offset + 4);
|
|
|
|
/* MCS 14 */
|
|
txpower = rt2x00_get_field16(eeprom, EEPROM_TXPOWER_BYRATE_RATE0);
|
|
txpower = rt2800_compensate_txpower(rt2x00dev, 0, band, power_level,
|
|
txpower, delta);
|
|
rt2x00_set_field32(®s[TX_PWR_CFG_3_IDX],
|
|
TX_PWR_CFG_3_MCS14_CH0, txpower);
|
|
rt2x00_set_field32(®s[TX_PWR_CFG_3_IDX],
|
|
TX_PWR_CFG_3_MCS14_CH1, txpower);
|
|
rt2x00_set_field32(®s[TX_PWR_CFG_3_EXT_IDX],
|
|
TX_PWR_CFG_3_EXT_MCS14_CH2, txpower);
|
|
|
|
/* MCS 15 */
|
|
txpower = rt2x00_get_field16(eeprom, EEPROM_TXPOWER_BYRATE_RATE1);
|
|
txpower = rt2800_compensate_txpower(rt2x00dev, 0, band, power_level,
|
|
txpower, delta);
|
|
rt2x00_set_field32(®s[TX_PWR_CFG_8_IDX],
|
|
TX_PWR_CFG_8_MCS15_CH0, txpower);
|
|
rt2x00_set_field32(®s[TX_PWR_CFG_8_IDX],
|
|
TX_PWR_CFG_8_MCS15_CH1, txpower);
|
|
rt2x00_set_field32(®s[TX_PWR_CFG_8_IDX],
|
|
TX_PWR_CFG_8_MCS15_CH2, txpower);
|
|
|
|
/* MCS 16,17 */
|
|
txpower = rt2x00_get_field16(eeprom, EEPROM_TXPOWER_BYRATE_RATE2);
|
|
txpower = rt2800_compensate_txpower(rt2x00dev, 0, band, power_level,
|
|
txpower, delta);
|
|
rt2x00_set_field32(®s[TX_PWR_CFG_5_IDX],
|
|
TX_PWR_CFG_5_MCS16_CH0, txpower);
|
|
rt2x00_set_field32(®s[TX_PWR_CFG_5_IDX],
|
|
TX_PWR_CFG_5_MCS16_CH1, txpower);
|
|
rt2x00_set_field32(®s[TX_PWR_CFG_5_IDX],
|
|
TX_PWR_CFG_5_MCS16_CH2, txpower);
|
|
|
|
/* MCS 18,19 */
|
|
txpower = rt2x00_get_field16(eeprom, EEPROM_TXPOWER_BYRATE_RATE3);
|
|
txpower = rt2800_compensate_txpower(rt2x00dev, 0, band, power_level,
|
|
txpower, delta);
|
|
rt2x00_set_field32(®s[TX_PWR_CFG_5_IDX],
|
|
TX_PWR_CFG_5_MCS18_CH0, txpower);
|
|
rt2x00_set_field32(®s[TX_PWR_CFG_5_IDX],
|
|
TX_PWR_CFG_5_MCS18_CH1, txpower);
|
|
rt2x00_set_field32(®s[TX_PWR_CFG_5_IDX],
|
|
TX_PWR_CFG_5_MCS18_CH2, txpower);
|
|
|
|
/* read the next four txpower values */
|
|
eeprom = rt2800_eeprom_read_from_array(rt2x00dev, EEPROM_TXPOWER_BYRATE,
|
|
offset + 5);
|
|
|
|
/* MCS 20,21 */
|
|
txpower = rt2x00_get_field16(eeprom, EEPROM_TXPOWER_BYRATE_RATE0);
|
|
txpower = rt2800_compensate_txpower(rt2x00dev, 0, band, power_level,
|
|
txpower, delta);
|
|
rt2x00_set_field32(®s[TX_PWR_CFG_6_IDX],
|
|
TX_PWR_CFG_6_MCS20_CH0, txpower);
|
|
rt2x00_set_field32(®s[TX_PWR_CFG_6_IDX],
|
|
TX_PWR_CFG_6_MCS20_CH1, txpower);
|
|
rt2x00_set_field32(®s[TX_PWR_CFG_6_IDX],
|
|
TX_PWR_CFG_6_MCS20_CH2, txpower);
|
|
|
|
/* MCS 22 */
|
|
txpower = rt2x00_get_field16(eeprom, EEPROM_TXPOWER_BYRATE_RATE1);
|
|
txpower = rt2800_compensate_txpower(rt2x00dev, 0, band, power_level,
|
|
txpower, delta);
|
|
rt2x00_set_field32(®s[TX_PWR_CFG_6_IDX],
|
|
TX_PWR_CFG_6_MCS22_CH0, txpower);
|
|
rt2x00_set_field32(®s[TX_PWR_CFG_6_IDX],
|
|
TX_PWR_CFG_6_MCS22_CH1, txpower);
|
|
rt2x00_set_field32(®s[TX_PWR_CFG_6_IDX],
|
|
TX_PWR_CFG_6_MCS22_CH2, txpower);
|
|
|
|
/* MCS 23 */
|
|
txpower = rt2x00_get_field16(eeprom, EEPROM_TXPOWER_BYRATE_RATE2);
|
|
txpower = rt2800_compensate_txpower(rt2x00dev, 0, band, power_level,
|
|
txpower, delta);
|
|
rt2x00_set_field32(®s[TX_PWR_CFG_8_IDX],
|
|
TX_PWR_CFG_8_MCS23_CH0, txpower);
|
|
rt2x00_set_field32(®s[TX_PWR_CFG_8_IDX],
|
|
TX_PWR_CFG_8_MCS23_CH1, txpower);
|
|
rt2x00_set_field32(®s[TX_PWR_CFG_8_IDX],
|
|
TX_PWR_CFG_8_MCS23_CH2, txpower);
|
|
|
|
/* read the next four txpower values */
|
|
eeprom = rt2800_eeprom_read_from_array(rt2x00dev, EEPROM_TXPOWER_BYRATE,
|
|
offset + 6);
|
|
|
|
/* STBC, MCS 0,1 */
|
|
txpower = rt2x00_get_field16(eeprom, EEPROM_TXPOWER_BYRATE_RATE0);
|
|
txpower = rt2800_compensate_txpower(rt2x00dev, 0, band, power_level,
|
|
txpower, delta);
|
|
rt2x00_set_field32(®s[TX_PWR_CFG_3_IDX],
|
|
TX_PWR_CFG_3_STBC0_CH0, txpower);
|
|
rt2x00_set_field32(®s[TX_PWR_CFG_3_IDX],
|
|
TX_PWR_CFG_3_STBC0_CH1, txpower);
|
|
rt2x00_set_field32(®s[TX_PWR_CFG_3_EXT_IDX],
|
|
TX_PWR_CFG_3_EXT_STBC0_CH2, txpower);
|
|
|
|
/* STBC, MCS 2,3 */
|
|
txpower = rt2x00_get_field16(eeprom, EEPROM_TXPOWER_BYRATE_RATE1);
|
|
txpower = rt2800_compensate_txpower(rt2x00dev, 0, band, power_level,
|
|
txpower, delta);
|
|
rt2x00_set_field32(®s[TX_PWR_CFG_3_IDX],
|
|
TX_PWR_CFG_3_STBC2_CH0, txpower);
|
|
rt2x00_set_field32(®s[TX_PWR_CFG_3_IDX],
|
|
TX_PWR_CFG_3_STBC2_CH1, txpower);
|
|
rt2x00_set_field32(®s[TX_PWR_CFG_3_EXT_IDX],
|
|
TX_PWR_CFG_3_EXT_STBC2_CH2, txpower);
|
|
|
|
/* STBC, MCS 4,5 */
|
|
txpower = rt2x00_get_field16(eeprom, EEPROM_TXPOWER_BYRATE_RATE2);
|
|
txpower = rt2800_compensate_txpower(rt2x00dev, 0, band, power_level,
|
|
txpower, delta);
|
|
rt2x00_set_field32(®s[TX_PWR_CFG_4_IDX], TX_PWR_CFG_RATE0, txpower);
|
|
rt2x00_set_field32(®s[TX_PWR_CFG_4_IDX], TX_PWR_CFG_RATE1, txpower);
|
|
rt2x00_set_field32(®s[TX_PWR_CFG_4_EXT_IDX], TX_PWR_CFG_RATE0,
|
|
txpower);
|
|
|
|
/* STBC, MCS 6 */
|
|
txpower = rt2x00_get_field16(eeprom, EEPROM_TXPOWER_BYRATE_RATE3);
|
|
txpower = rt2800_compensate_txpower(rt2x00dev, 0, band, power_level,
|
|
txpower, delta);
|
|
rt2x00_set_field32(®s[TX_PWR_CFG_4_IDX], TX_PWR_CFG_RATE2, txpower);
|
|
rt2x00_set_field32(®s[TX_PWR_CFG_4_IDX], TX_PWR_CFG_RATE3, txpower);
|
|
rt2x00_set_field32(®s[TX_PWR_CFG_4_EXT_IDX], TX_PWR_CFG_RATE2,
|
|
txpower);
|
|
|
|
/* read the next four txpower values */
|
|
eeprom = rt2800_eeprom_read_from_array(rt2x00dev, EEPROM_TXPOWER_BYRATE,
|
|
offset + 7);
|
|
|
|
/* STBC, MCS 7 */
|
|
txpower = rt2x00_get_field16(eeprom, EEPROM_TXPOWER_BYRATE_RATE0);
|
|
txpower = rt2800_compensate_txpower(rt2x00dev, 0, band, power_level,
|
|
txpower, delta);
|
|
rt2x00_set_field32(®s[TX_PWR_CFG_9_IDX],
|
|
TX_PWR_CFG_9_STBC7_CH0, txpower);
|
|
rt2x00_set_field32(®s[TX_PWR_CFG_9_IDX],
|
|
TX_PWR_CFG_9_STBC7_CH1, txpower);
|
|
rt2x00_set_field32(®s[TX_PWR_CFG_9_IDX],
|
|
TX_PWR_CFG_9_STBC7_CH2, txpower);
|
|
|
|
rt2800_register_write(rt2x00dev, TX_PWR_CFG_0, regs[TX_PWR_CFG_0_IDX]);
|
|
rt2800_register_write(rt2x00dev, TX_PWR_CFG_1, regs[TX_PWR_CFG_1_IDX]);
|
|
rt2800_register_write(rt2x00dev, TX_PWR_CFG_2, regs[TX_PWR_CFG_2_IDX]);
|
|
rt2800_register_write(rt2x00dev, TX_PWR_CFG_3, regs[TX_PWR_CFG_3_IDX]);
|
|
rt2800_register_write(rt2x00dev, TX_PWR_CFG_4, regs[TX_PWR_CFG_4_IDX]);
|
|
rt2800_register_write(rt2x00dev, TX_PWR_CFG_5, regs[TX_PWR_CFG_5_IDX]);
|
|
rt2800_register_write(rt2x00dev, TX_PWR_CFG_6, regs[TX_PWR_CFG_6_IDX]);
|
|
rt2800_register_write(rt2x00dev, TX_PWR_CFG_7, regs[TX_PWR_CFG_7_IDX]);
|
|
rt2800_register_write(rt2x00dev, TX_PWR_CFG_8, regs[TX_PWR_CFG_8_IDX]);
|
|
rt2800_register_write(rt2x00dev, TX_PWR_CFG_9, regs[TX_PWR_CFG_9_IDX]);
|
|
|
|
rt2800_register_write(rt2x00dev, TX_PWR_CFG_0_EXT,
|
|
regs[TX_PWR_CFG_0_EXT_IDX]);
|
|
rt2800_register_write(rt2x00dev, TX_PWR_CFG_1_EXT,
|
|
regs[TX_PWR_CFG_1_EXT_IDX]);
|
|
rt2800_register_write(rt2x00dev, TX_PWR_CFG_2_EXT,
|
|
regs[TX_PWR_CFG_2_EXT_IDX]);
|
|
rt2800_register_write(rt2x00dev, TX_PWR_CFG_3_EXT,
|
|
regs[TX_PWR_CFG_3_EXT_IDX]);
|
|
rt2800_register_write(rt2x00dev, TX_PWR_CFG_4_EXT,
|
|
regs[TX_PWR_CFG_4_EXT_IDX]);
|
|
|
|
for (i = 0; i < TX_PWR_CFG_IDX_COUNT; i++)
|
|
rt2x00_dbg(rt2x00dev,
|
|
"band:%cGHz, BW:%c0MHz, TX_PWR_CFG_%d%s = %08lx\n",
|
|
(band == NL80211_BAND_5GHZ) ? '5' : '2',
|
|
(test_bit(CONFIG_CHANNEL_HT40, &rt2x00dev->flags)) ?
|
|
'4' : '2',
|
|
(i > TX_PWR_CFG_9_IDX) ?
|
|
(i - TX_PWR_CFG_9_IDX - 1) : i,
|
|
(i > TX_PWR_CFG_9_IDX) ? "_EXT" : "",
|
|
(unsigned long) regs[i]);
|
|
}
|
|
|
|
static void rt2800_config_txpower_rt6352(struct rt2x00_dev *rt2x00dev,
|
|
struct ieee80211_channel *chan,
|
|
int power_level)
|
|
{
|
|
u32 reg, pwreg;
|
|
u16 eeprom;
|
|
u32 data, gdata;
|
|
u8 t, i;
|
|
enum nl80211_band band = chan->band;
|
|
int delta;
|
|
|
|
/* Warn user if bw_comp is set in EEPROM */
|
|
delta = rt2800_get_txpower_bw_comp(rt2x00dev, band);
|
|
|
|
if (delta)
|
|
rt2x00_warn(rt2x00dev, "ignoring EEPROM HT40 power delta: %d\n",
|
|
delta);
|
|
|
|
/* populate TX_PWR_CFG_0 up to TX_PWR_CFG_4 from EEPROM for HT20, limit
|
|
* value to 0x3f and replace 0x20 by 0x21 as this is what the vendor
|
|
* driver does as well, though it looks kinda wrong.
|
|
* Maybe some misunderstanding of what a signed 8-bit value is? Maybe
|
|
* the hardware has a problem handling 0x20, and as the code initially
|
|
* used a fixed offset between HT20 and HT40 rates they had to work-
|
|
* around that issue and most likely just forgot about it later on.
|
|
* Maybe we should use rt2800_get_txpower_bw_comp() here as well,
|
|
* however, the corresponding EEPROM value is not respected by the
|
|
* vendor driver, so maybe this is rather being taken care of the
|
|
* TXALC and the driver doesn't need to handle it...?
|
|
* Though this is all very awkward, just do as they did, as that's what
|
|
* board vendors expected when they populated the EEPROM...
|
|
*/
|
|
for (i = 0; i < 5; i++) {
|
|
eeprom = rt2800_eeprom_read_from_array(rt2x00dev,
|
|
EEPROM_TXPOWER_BYRATE,
|
|
i * 2);
|
|
|
|
data = eeprom;
|
|
|
|
t = eeprom & 0x3f;
|
|
if (t == 32)
|
|
t++;
|
|
|
|
gdata = t;
|
|
|
|
t = (eeprom & 0x3f00) >> 8;
|
|
if (t == 32)
|
|
t++;
|
|
|
|
gdata |= (t << 8);
|
|
|
|
eeprom = rt2800_eeprom_read_from_array(rt2x00dev,
|
|
EEPROM_TXPOWER_BYRATE,
|
|
(i * 2) + 1);
|
|
|
|
t = eeprom & 0x3f;
|
|
if (t == 32)
|
|
t++;
|
|
|
|
gdata |= (t << 16);
|
|
|
|
t = (eeprom & 0x3f00) >> 8;
|
|
if (t == 32)
|
|
t++;
|
|
|
|
gdata |= (t << 24);
|
|
data |= (eeprom << 16);
|
|
|
|
if (!test_bit(CONFIG_CHANNEL_HT40, &rt2x00dev->flags)) {
|
|
/* HT20 */
|
|
if (data != 0xffffffff)
|
|
rt2800_register_write(rt2x00dev,
|
|
TX_PWR_CFG_0 + (i * 4),
|
|
data);
|
|
} else {
|
|
/* HT40 */
|
|
if (gdata != 0xffffffff)
|
|
rt2800_register_write(rt2x00dev,
|
|
TX_PWR_CFG_0 + (i * 4),
|
|
gdata);
|
|
}
|
|
}
|
|
|
|
/* Aparently Ralink ran out of space in the BYRATE calibration section
|
|
* of the EERPOM which is copied to the corresponding TX_PWR_CFG_x
|
|
* registers. As recent 2T chips use 8-bit instead of 4-bit values for
|
|
* power-offsets more space would be needed. Ralink decided to keep the
|
|
* EEPROM layout untouched and rather have some shared values covering
|
|
* multiple bitrates.
|
|
* Populate the registers not covered by the EEPROM in the same way the
|
|
* vendor driver does.
|
|
*/
|
|
|
|
/* For OFDM 54MBS use value from OFDM 48MBS */
|
|
pwreg = 0;
|
|
reg = rt2800_register_read(rt2x00dev, TX_PWR_CFG_1);
|
|
t = rt2x00_get_field32(reg, TX_PWR_CFG_1B_48MBS);
|
|
rt2x00_set_field32(&pwreg, TX_PWR_CFG_7B_54MBS, t);
|
|
|
|
/* For MCS 7 use value from MCS 6 */
|
|
reg = rt2800_register_read(rt2x00dev, TX_PWR_CFG_2);
|
|
t = rt2x00_get_field32(reg, TX_PWR_CFG_2B_MCS6_MCS7);
|
|
rt2x00_set_field32(&pwreg, TX_PWR_CFG_7B_MCS7, t);
|
|
rt2800_register_write(rt2x00dev, TX_PWR_CFG_7, pwreg);
|
|
|
|
/* For MCS 15 use value from MCS 14 */
|
|
pwreg = 0;
|
|
reg = rt2800_register_read(rt2x00dev, TX_PWR_CFG_3);
|
|
t = rt2x00_get_field32(reg, TX_PWR_CFG_3B_MCS14);
|
|
rt2x00_set_field32(&pwreg, TX_PWR_CFG_8B_MCS15, t);
|
|
rt2800_register_write(rt2x00dev, TX_PWR_CFG_8, pwreg);
|
|
|
|
/* For STBC MCS 7 use value from STBC MCS 6 */
|
|
pwreg = 0;
|
|
reg = rt2800_register_read(rt2x00dev, TX_PWR_CFG_4);
|
|
t = rt2x00_get_field32(reg, TX_PWR_CFG_4B_STBC_MCS6);
|
|
rt2x00_set_field32(&pwreg, TX_PWR_CFG_9B_STBC_MCS7, t);
|
|
rt2800_register_write(rt2x00dev, TX_PWR_CFG_9, pwreg);
|
|
|
|
rt2800_config_alc(rt2x00dev, chan, power_level);
|
|
|
|
/* TODO: temperature compensation code! */
|
|
}
|
|
|
|
/*
|
|
* We configure transmit power using MAC TX_PWR_CFG_{0,...,N} registers and
|
|
* BBP R1 register. TX_PWR_CFG_X allow to configure per rate TX power values,
|
|
* 4 bits for each rate (tune from 0 to 15 dBm). BBP_R1 controls transmit power
|
|
* for all rates, but allow to set only 4 discrete values: -12, -6, 0 and 6 dBm.
|
|
* Reference per rate transmit power values are located in the EEPROM at
|
|
* EEPROM_TXPOWER_BYRATE offset. We adjust them and BBP R1 settings according to
|
|
* current conditions (i.e. band, bandwidth, temperature, user settings).
|
|
*/
|
|
static void rt2800_config_txpower_rt28xx(struct rt2x00_dev *rt2x00dev,
|
|
struct ieee80211_channel *chan,
|
|
int power_level)
|
|
{
|
|
u8 txpower, r1;
|
|
u16 eeprom;
|
|
u32 reg, offset;
|
|
int i, is_rate_b, delta, power_ctrl;
|
|
enum nl80211_band band = chan->band;
|
|
|
|
/*
|
|
* Calculate HT40 compensation. For 40MHz we need to add or subtract
|
|
* value read from EEPROM (different for 2GHz and for 5GHz).
|
|
*/
|
|
delta = rt2800_get_txpower_bw_comp(rt2x00dev, band);
|
|
|
|
/*
|
|
* Calculate temperature compensation. Depends on measurement of current
|
|
* TSSI (Transmitter Signal Strength Indication) we know TX power (due
|
|
* to temperature or maybe other factors) is smaller or bigger than
|
|
* expected. We adjust it, based on TSSI reference and boundaries values
|
|
* provided in EEPROM.
|
|
*/
|
|
switch (rt2x00dev->chip.rt) {
|
|
case RT2860:
|
|
case RT2872:
|
|
case RT2883:
|
|
case RT3070:
|
|
case RT3071:
|
|
case RT3090:
|
|
case RT3572:
|
|
delta += rt2800_get_gain_calibration_delta(rt2x00dev);
|
|
break;
|
|
default:
|
|
/* TODO: temperature compensation code for other chips. */
|
|
break;
|
|
}
|
|
|
|
/*
|
|
* Decrease power according to user settings, on devices with unknown
|
|
* maximum tx power. For other devices we take user power_level into
|
|
* consideration on rt2800_compensate_txpower().
|
|
*/
|
|
delta += rt2800_get_txpower_reg_delta(rt2x00dev, power_level,
|
|
chan->max_power);
|
|
|
|
/*
|
|
* BBP_R1 controls TX power for all rates, it allow to set the following
|
|
* gains -12, -6, 0, +6 dBm by setting values 2, 1, 0, 3 respectively.
|
|
*
|
|
* TODO: we do not use +6 dBm option to do not increase power beyond
|
|
* regulatory limit, however this could be utilized for devices with
|
|
* CAPABILITY_POWER_LIMIT.
|
|
*/
|
|
if (delta <= -12) {
|
|
power_ctrl = 2;
|
|
delta += 12;
|
|
} else if (delta <= -6) {
|
|
power_ctrl = 1;
|
|
delta += 6;
|
|
} else {
|
|
power_ctrl = 0;
|
|
}
|
|
r1 = rt2800_bbp_read(rt2x00dev, 1);
|
|
rt2x00_set_field8(&r1, BBP1_TX_POWER_CTRL, power_ctrl);
|
|
rt2800_bbp_write(rt2x00dev, 1, r1);
|
|
|
|
offset = TX_PWR_CFG_0;
|
|
|
|
for (i = 0; i < EEPROM_TXPOWER_BYRATE_SIZE; i += 2) {
|
|
/* just to be safe */
|
|
if (offset > TX_PWR_CFG_4)
|
|
break;
|
|
|
|
reg = rt2800_register_read(rt2x00dev, offset);
|
|
|
|
/* read the next four txpower values */
|
|
eeprom = rt2800_eeprom_read_from_array(rt2x00dev,
|
|
EEPROM_TXPOWER_BYRATE,
|
|
i);
|
|
|
|
is_rate_b = i ? 0 : 1;
|
|
/*
|
|
* TX_PWR_CFG_0: 1MBS, TX_PWR_CFG_1: 24MBS,
|
|
* TX_PWR_CFG_2: MCS4, TX_PWR_CFG_3: MCS12,
|
|
* TX_PWR_CFG_4: unknown
|
|
*/
|
|
txpower = rt2x00_get_field16(eeprom,
|
|
EEPROM_TXPOWER_BYRATE_RATE0);
|
|
txpower = rt2800_compensate_txpower(rt2x00dev, is_rate_b, band,
|
|
power_level, txpower, delta);
|
|
rt2x00_set_field32(®, TX_PWR_CFG_RATE0, txpower);
|
|
|
|
/*
|
|
* TX_PWR_CFG_0: 2MBS, TX_PWR_CFG_1: 36MBS,
|
|
* TX_PWR_CFG_2: MCS5, TX_PWR_CFG_3: MCS13,
|
|
* TX_PWR_CFG_4: unknown
|
|
*/
|
|
txpower = rt2x00_get_field16(eeprom,
|
|
EEPROM_TXPOWER_BYRATE_RATE1);
|
|
txpower = rt2800_compensate_txpower(rt2x00dev, is_rate_b, band,
|
|
power_level, txpower, delta);
|
|
rt2x00_set_field32(®, TX_PWR_CFG_RATE1, txpower);
|
|
|
|
/*
|
|
* TX_PWR_CFG_0: 5.5MBS, TX_PWR_CFG_1: 48MBS,
|
|
* TX_PWR_CFG_2: MCS6, TX_PWR_CFG_3: MCS14,
|
|
* TX_PWR_CFG_4: unknown
|
|
*/
|
|
txpower = rt2x00_get_field16(eeprom,
|
|
EEPROM_TXPOWER_BYRATE_RATE2);
|
|
txpower = rt2800_compensate_txpower(rt2x00dev, is_rate_b, band,
|
|
power_level, txpower, delta);
|
|
rt2x00_set_field32(®, TX_PWR_CFG_RATE2, txpower);
|
|
|
|
/*
|
|
* TX_PWR_CFG_0: 11MBS, TX_PWR_CFG_1: 54MBS,
|
|
* TX_PWR_CFG_2: MCS7, TX_PWR_CFG_3: MCS15,
|
|
* TX_PWR_CFG_4: unknown
|
|
*/
|
|
txpower = rt2x00_get_field16(eeprom,
|
|
EEPROM_TXPOWER_BYRATE_RATE3);
|
|
txpower = rt2800_compensate_txpower(rt2x00dev, is_rate_b, band,
|
|
power_level, txpower, delta);
|
|
rt2x00_set_field32(®, TX_PWR_CFG_RATE3, txpower);
|
|
|
|
/* read the next four txpower values */
|
|
eeprom = rt2800_eeprom_read_from_array(rt2x00dev,
|
|
EEPROM_TXPOWER_BYRATE,
|
|
i + 1);
|
|
|
|
is_rate_b = 0;
|
|
/*
|
|
* TX_PWR_CFG_0: 6MBS, TX_PWR_CFG_1: MCS0,
|
|
* TX_PWR_CFG_2: MCS8, TX_PWR_CFG_3: unknown,
|
|
* TX_PWR_CFG_4: unknown
|
|
*/
|
|
txpower = rt2x00_get_field16(eeprom,
|
|
EEPROM_TXPOWER_BYRATE_RATE0);
|
|
txpower = rt2800_compensate_txpower(rt2x00dev, is_rate_b, band,
|
|
power_level, txpower, delta);
|
|
rt2x00_set_field32(®, TX_PWR_CFG_RATE4, txpower);
|
|
|
|
/*
|
|
* TX_PWR_CFG_0: 9MBS, TX_PWR_CFG_1: MCS1,
|
|
* TX_PWR_CFG_2: MCS9, TX_PWR_CFG_3: unknown,
|
|
* TX_PWR_CFG_4: unknown
|
|
*/
|
|
txpower = rt2x00_get_field16(eeprom,
|
|
EEPROM_TXPOWER_BYRATE_RATE1);
|
|
txpower = rt2800_compensate_txpower(rt2x00dev, is_rate_b, band,
|
|
power_level, txpower, delta);
|
|
rt2x00_set_field32(®, TX_PWR_CFG_RATE5, txpower);
|
|
|
|
/*
|
|
* TX_PWR_CFG_0: 12MBS, TX_PWR_CFG_1: MCS2,
|
|
* TX_PWR_CFG_2: MCS10, TX_PWR_CFG_3: unknown,
|
|
* TX_PWR_CFG_4: unknown
|
|
*/
|
|
txpower = rt2x00_get_field16(eeprom,
|
|
EEPROM_TXPOWER_BYRATE_RATE2);
|
|
txpower = rt2800_compensate_txpower(rt2x00dev, is_rate_b, band,
|
|
power_level, txpower, delta);
|
|
rt2x00_set_field32(®, TX_PWR_CFG_RATE6, txpower);
|
|
|
|
/*
|
|
* TX_PWR_CFG_0: 18MBS, TX_PWR_CFG_1: MCS3,
|
|
* TX_PWR_CFG_2: MCS11, TX_PWR_CFG_3: unknown,
|
|
* TX_PWR_CFG_4: unknown
|
|
*/
|
|
txpower = rt2x00_get_field16(eeprom,
|
|
EEPROM_TXPOWER_BYRATE_RATE3);
|
|
txpower = rt2800_compensate_txpower(rt2x00dev, is_rate_b, band,
|
|
power_level, txpower, delta);
|
|
rt2x00_set_field32(®, TX_PWR_CFG_RATE7, txpower);
|
|
|
|
rt2800_register_write(rt2x00dev, offset, reg);
|
|
|
|
/* next TX_PWR_CFG register */
|
|
offset += 4;
|
|
}
|
|
}
|
|
|
|
static void rt2800_config_txpower(struct rt2x00_dev *rt2x00dev,
|
|
struct ieee80211_channel *chan,
|
|
int power_level)
|
|
{
|
|
if (rt2x00_rt(rt2x00dev, RT3593) ||
|
|
rt2x00_rt(rt2x00dev, RT3883))
|
|
rt2800_config_txpower_rt3593(rt2x00dev, chan, power_level);
|
|
else if (rt2x00_rt(rt2x00dev, RT6352))
|
|
rt2800_config_txpower_rt6352(rt2x00dev, chan, power_level);
|
|
else
|
|
rt2800_config_txpower_rt28xx(rt2x00dev, chan, power_level);
|
|
}
|
|
|
|
void rt2800_gain_calibration(struct rt2x00_dev *rt2x00dev)
|
|
{
|
|
rt2800_config_txpower(rt2x00dev, rt2x00dev->hw->conf.chandef.chan,
|
|
rt2x00dev->tx_power);
|
|
}
|
|
EXPORT_SYMBOL_GPL(rt2800_gain_calibration);
|
|
|
|
void rt2800_vco_calibration(struct rt2x00_dev *rt2x00dev)
|
|
{
|
|
u32 tx_pin;
|
|
u8 rfcsr;
|
|
unsigned long min_sleep = 0;
|
|
|
|
/*
|
|
* A voltage-controlled oscillator(VCO) is an electronic oscillator
|
|
* designed to be controlled in oscillation frequency by a voltage
|
|
* input. Maybe the temperature will affect the frequency of
|
|
* oscillation to be shifted. The VCO calibration will be called
|
|
* periodically to adjust the frequency to be precision.
|
|
*/
|
|
|
|
tx_pin = rt2800_register_read(rt2x00dev, TX_PIN_CFG);
|
|
tx_pin &= TX_PIN_CFG_PA_PE_DISABLE;
|
|
rt2800_register_write(rt2x00dev, TX_PIN_CFG, tx_pin);
|
|
|
|
switch (rt2x00dev->chip.rf) {
|
|
case RF2020:
|
|
case RF3020:
|
|
case RF3021:
|
|
case RF3022:
|
|
case RF3320:
|
|
case RF3052:
|
|
rfcsr = rt2800_rfcsr_read(rt2x00dev, 7);
|
|
rt2x00_set_field8(&rfcsr, RFCSR7_RF_TUNING, 1);
|
|
rt2800_rfcsr_write(rt2x00dev, 7, rfcsr);
|
|
break;
|
|
case RF3053:
|
|
case RF3070:
|
|
case RF3290:
|
|
case RF3853:
|
|
case RF5350:
|
|
case RF5360:
|
|
case RF5362:
|
|
case RF5370:
|
|
case RF5372:
|
|
case RF5390:
|
|
case RF5392:
|
|
case RF5592:
|
|
rfcsr = rt2800_rfcsr_read(rt2x00dev, 3);
|
|
rt2x00_set_field8(&rfcsr, RFCSR3_VCOCAL_EN, 1);
|
|
rt2800_rfcsr_write(rt2x00dev, 3, rfcsr);
|
|
min_sleep = 1000;
|
|
break;
|
|
case RF7620:
|
|
rt2800_rfcsr_write(rt2x00dev, 5, 0x40);
|
|
rt2800_rfcsr_write(rt2x00dev, 4, 0x0C);
|
|
rfcsr = rt2800_rfcsr_read(rt2x00dev, 4);
|
|
rt2x00_set_field8(&rfcsr, RFCSR4_VCOCAL_EN, 1);
|
|
rt2800_rfcsr_write(rt2x00dev, 4, rfcsr);
|
|
min_sleep = 2000;
|
|
break;
|
|
default:
|
|
WARN_ONCE(1, "Not supported RF chipset %x for VCO recalibration",
|
|
rt2x00dev->chip.rf);
|
|
return;
|
|
}
|
|
|
|
if (min_sleep > 0)
|
|
usleep_range(min_sleep, min_sleep * 2);
|
|
|
|
tx_pin = rt2800_register_read(rt2x00dev, TX_PIN_CFG);
|
|
if (rt2x00dev->rf_channel <= 14) {
|
|
switch (rt2x00dev->default_ant.tx_chain_num) {
|
|
case 3:
|
|
rt2x00_set_field32(&tx_pin, TX_PIN_CFG_PA_PE_G2_EN, 1);
|
|
fallthrough;
|
|
case 2:
|
|
rt2x00_set_field32(&tx_pin, TX_PIN_CFG_PA_PE_G1_EN, 1);
|
|
fallthrough;
|
|
case 1:
|
|
default:
|
|
rt2x00_set_field32(&tx_pin, TX_PIN_CFG_PA_PE_G0_EN, 1);
|
|
break;
|
|
}
|
|
} else {
|
|
switch (rt2x00dev->default_ant.tx_chain_num) {
|
|
case 3:
|
|
rt2x00_set_field32(&tx_pin, TX_PIN_CFG_PA_PE_A2_EN, 1);
|
|
fallthrough;
|
|
case 2:
|
|
rt2x00_set_field32(&tx_pin, TX_PIN_CFG_PA_PE_A1_EN, 1);
|
|
fallthrough;
|
|
case 1:
|
|
default:
|
|
rt2x00_set_field32(&tx_pin, TX_PIN_CFG_PA_PE_A0_EN, 1);
|
|
break;
|
|
}
|
|
}
|
|
rt2800_register_write(rt2x00dev, TX_PIN_CFG, tx_pin);
|
|
|
|
if (rt2x00_rt(rt2x00dev, RT6352)) {
|
|
if (rt2x00dev->default_ant.rx_chain_num == 1) {
|
|
rt2800_bbp_write(rt2x00dev, 91, 0x07);
|
|
rt2800_bbp_write(rt2x00dev, 95, 0x1A);
|
|
rt2800_bbp_write(rt2x00dev, 195, 128);
|
|
rt2800_bbp_write(rt2x00dev, 196, 0xA0);
|
|
rt2800_bbp_write(rt2x00dev, 195, 170);
|
|
rt2800_bbp_write(rt2x00dev, 196, 0x12);
|
|
rt2800_bbp_write(rt2x00dev, 195, 171);
|
|
rt2800_bbp_write(rt2x00dev, 196, 0x10);
|
|
} else {
|
|
rt2800_bbp_write(rt2x00dev, 91, 0x06);
|
|
rt2800_bbp_write(rt2x00dev, 95, 0x9A);
|
|
rt2800_bbp_write(rt2x00dev, 195, 128);
|
|
rt2800_bbp_write(rt2x00dev, 196, 0xE0);
|
|
rt2800_bbp_write(rt2x00dev, 195, 170);
|
|
rt2800_bbp_write(rt2x00dev, 196, 0x30);
|
|
rt2800_bbp_write(rt2x00dev, 195, 171);
|
|
rt2800_bbp_write(rt2x00dev, 196, 0x30);
|
|
}
|
|
|
|
if (rt2x00_has_cap_external_lna_bg(rt2x00dev)) {
|
|
rt2800_bbp_write(rt2x00dev, 75, 0x68);
|
|
rt2800_bbp_write(rt2x00dev, 76, 0x4C);
|
|
rt2800_bbp_write(rt2x00dev, 79, 0x1C);
|
|
rt2800_bbp_write(rt2x00dev, 80, 0x0C);
|
|
rt2800_bbp_write(rt2x00dev, 82, 0xB6);
|
|
}
|
|
|
|
/* On 11A, We should delay and wait RF/BBP to be stable
|
|
* and the appropriate time should be 1000 micro seconds
|
|
* 2005/06/05 - On 11G, we also need this delay time.
|
|
* Otherwise it's difficult to pass the WHQL.
|
|
*/
|
|
usleep_range(1000, 1500);
|
|
}
|
|
}
|
|
EXPORT_SYMBOL_GPL(rt2800_vco_calibration);
|
|
|
|
static void rt2800_config_retry_limit(struct rt2x00_dev *rt2x00dev,
|
|
struct rt2x00lib_conf *libconf)
|
|
{
|
|
u32 reg;
|
|
|
|
reg = rt2800_register_read(rt2x00dev, TX_RTY_CFG);
|
|
rt2x00_set_field32(®, TX_RTY_CFG_SHORT_RTY_LIMIT,
|
|
libconf->conf->short_frame_max_tx_count);
|
|
rt2x00_set_field32(®, TX_RTY_CFG_LONG_RTY_LIMIT,
|
|
libconf->conf->long_frame_max_tx_count);
|
|
rt2800_register_write(rt2x00dev, TX_RTY_CFG, reg);
|
|
}
|
|
|
|
static void rt2800_config_ps(struct rt2x00_dev *rt2x00dev,
|
|
struct rt2x00lib_conf *libconf)
|
|
{
|
|
enum dev_state state =
|
|
(libconf->conf->flags & IEEE80211_CONF_PS) ?
|
|
STATE_SLEEP : STATE_AWAKE;
|
|
u32 reg;
|
|
|
|
if (state == STATE_SLEEP) {
|
|
rt2800_register_write(rt2x00dev, AUTOWAKEUP_CFG, 0);
|
|
|
|
reg = rt2800_register_read(rt2x00dev, AUTOWAKEUP_CFG);
|
|
rt2x00_set_field32(®, AUTOWAKEUP_CFG_AUTO_LEAD_TIME, 5);
|
|
rt2x00_set_field32(®, AUTOWAKEUP_CFG_TBCN_BEFORE_WAKE,
|
|
libconf->conf->listen_interval - 1);
|
|
rt2x00_set_field32(®, AUTOWAKEUP_CFG_AUTOWAKE, 1);
|
|
rt2800_register_write(rt2x00dev, AUTOWAKEUP_CFG, reg);
|
|
|
|
rt2x00dev->ops->lib->set_device_state(rt2x00dev, state);
|
|
} else {
|
|
reg = rt2800_register_read(rt2x00dev, AUTOWAKEUP_CFG);
|
|
rt2x00_set_field32(®, AUTOWAKEUP_CFG_AUTO_LEAD_TIME, 0);
|
|
rt2x00_set_field32(®, AUTOWAKEUP_CFG_TBCN_BEFORE_WAKE, 0);
|
|
rt2x00_set_field32(®, AUTOWAKEUP_CFG_AUTOWAKE, 0);
|
|
rt2800_register_write(rt2x00dev, AUTOWAKEUP_CFG, reg);
|
|
|
|
rt2x00dev->ops->lib->set_device_state(rt2x00dev, state);
|
|
}
|
|
}
|
|
|
|
void rt2800_config(struct rt2x00_dev *rt2x00dev,
|
|
struct rt2x00lib_conf *libconf,
|
|
const unsigned int flags)
|
|
{
|
|
/* Always recalculate LNA gain before changing configuration */
|
|
rt2800_config_lna_gain(rt2x00dev, libconf);
|
|
|
|
if (flags & IEEE80211_CONF_CHANGE_CHANNEL) {
|
|
/*
|
|
* To provide correct survey data for survey-based ACS algorithm
|
|
* we have to save survey data for current channel before switching.
|
|
*/
|
|
rt2800_update_survey(rt2x00dev);
|
|
|
|
rt2800_config_channel(rt2x00dev, libconf->conf,
|
|
&libconf->rf, &libconf->channel);
|
|
rt2800_config_txpower(rt2x00dev, libconf->conf->chandef.chan,
|
|
libconf->conf->power_level);
|
|
}
|
|
if (flags & IEEE80211_CONF_CHANGE_POWER)
|
|
rt2800_config_txpower(rt2x00dev, libconf->conf->chandef.chan,
|
|
libconf->conf->power_level);
|
|
if (flags & IEEE80211_CONF_CHANGE_RETRY_LIMITS)
|
|
rt2800_config_retry_limit(rt2x00dev, libconf);
|
|
if (flags & IEEE80211_CONF_CHANGE_PS)
|
|
rt2800_config_ps(rt2x00dev, libconf);
|
|
}
|
|
EXPORT_SYMBOL_GPL(rt2800_config);
|
|
|
|
/*
|
|
* Link tuning
|
|
*/
|
|
void rt2800_link_stats(struct rt2x00_dev *rt2x00dev, struct link_qual *qual)
|
|
{
|
|
u32 reg;
|
|
|
|
/*
|
|
* Update FCS error count from register.
|
|
*/
|
|
reg = rt2800_register_read(rt2x00dev, RX_STA_CNT0);
|
|
qual->rx_failed = rt2x00_get_field32(reg, RX_STA_CNT0_CRC_ERR);
|
|
}
|
|
EXPORT_SYMBOL_GPL(rt2800_link_stats);
|
|
|
|
static u8 rt2800_get_default_vgc(struct rt2x00_dev *rt2x00dev)
|
|
{
|
|
u8 vgc;
|
|
|
|
if (rt2x00dev->curr_band == NL80211_BAND_2GHZ) {
|
|
if (rt2x00_rt(rt2x00dev, RT3070) ||
|
|
rt2x00_rt(rt2x00dev, RT3071) ||
|
|
rt2x00_rt(rt2x00dev, RT3090) ||
|
|
rt2x00_rt(rt2x00dev, RT3290) ||
|
|
rt2x00_rt(rt2x00dev, RT3390) ||
|
|
rt2x00_rt(rt2x00dev, RT3572) ||
|
|
rt2x00_rt(rt2x00dev, RT3593) ||
|
|
rt2x00_rt(rt2x00dev, RT5390) ||
|
|
rt2x00_rt(rt2x00dev, RT5392) ||
|
|
rt2x00_rt(rt2x00dev, RT5592) ||
|
|
rt2x00_rt(rt2x00dev, RT6352))
|
|
vgc = 0x1c + (2 * rt2x00dev->lna_gain);
|
|
else
|
|
vgc = 0x2e + rt2x00dev->lna_gain;
|
|
} else { /* 5GHZ band */
|
|
if (rt2x00_rt(rt2x00dev, RT3593) ||
|
|
rt2x00_rt(rt2x00dev, RT3883))
|
|
vgc = 0x20 + (rt2x00dev->lna_gain * 5) / 3;
|
|
else if (rt2x00_rt(rt2x00dev, RT5592))
|
|
vgc = 0x24 + (2 * rt2x00dev->lna_gain);
|
|
else {
|
|
if (!test_bit(CONFIG_CHANNEL_HT40, &rt2x00dev->flags))
|
|
vgc = 0x32 + (rt2x00dev->lna_gain * 5) / 3;
|
|
else
|
|
vgc = 0x3a + (rt2x00dev->lna_gain * 5) / 3;
|
|
}
|
|
}
|
|
|
|
return vgc;
|
|
}
|
|
|
|
static inline void rt2800_set_vgc(struct rt2x00_dev *rt2x00dev,
|
|
struct link_qual *qual, u8 vgc_level)
|
|
{
|
|
if (qual->vgc_level != vgc_level) {
|
|
if (rt2x00_rt(rt2x00dev, RT3572) ||
|
|
rt2x00_rt(rt2x00dev, RT3593) ||
|
|
rt2x00_rt(rt2x00dev, RT3883) ||
|
|
rt2x00_rt(rt2x00dev, RT6352)) {
|
|
rt2800_bbp_write_with_rx_chain(rt2x00dev, 66,
|
|
vgc_level);
|
|
} else if (rt2x00_rt(rt2x00dev, RT5592)) {
|
|
rt2800_bbp_write(rt2x00dev, 83, qual->rssi > -65 ? 0x4a : 0x7a);
|
|
rt2800_bbp_write_with_rx_chain(rt2x00dev, 66, vgc_level);
|
|
} else {
|
|
rt2800_bbp_write(rt2x00dev, 66, vgc_level);
|
|
}
|
|
|
|
qual->vgc_level = vgc_level;
|
|
qual->vgc_level_reg = vgc_level;
|
|
}
|
|
}
|
|
|
|
void rt2800_reset_tuner(struct rt2x00_dev *rt2x00dev, struct link_qual *qual)
|
|
{
|
|
rt2800_set_vgc(rt2x00dev, qual, rt2800_get_default_vgc(rt2x00dev));
|
|
}
|
|
EXPORT_SYMBOL_GPL(rt2800_reset_tuner);
|
|
|
|
void rt2800_link_tuner(struct rt2x00_dev *rt2x00dev, struct link_qual *qual,
|
|
const u32 count)
|
|
{
|
|
u8 vgc;
|
|
|
|
if (rt2x00_rt_rev(rt2x00dev, RT2860, REV_RT2860C))
|
|
return;
|
|
|
|
/* When RSSI is better than a certain threshold, increase VGC
|
|
* with a chip specific value in order to improve the balance
|
|
* between sensibility and noise isolation.
|
|
*/
|
|
|
|
vgc = rt2800_get_default_vgc(rt2x00dev);
|
|
|
|
switch (rt2x00dev->chip.rt) {
|
|
case RT3572:
|
|
case RT3593:
|
|
if (qual->rssi > -65) {
|
|
if (rt2x00dev->curr_band == NL80211_BAND_2GHZ)
|
|
vgc += 0x20;
|
|
else
|
|
vgc += 0x10;
|
|
}
|
|
break;
|
|
|
|
case RT3883:
|
|
if (qual->rssi > -65)
|
|
vgc += 0x10;
|
|
break;
|
|
|
|
case RT5592:
|
|
if (qual->rssi > -65)
|
|
vgc += 0x20;
|
|
break;
|
|
|
|
default:
|
|
if (qual->rssi > -80)
|
|
vgc += 0x10;
|
|
break;
|
|
}
|
|
|
|
rt2800_set_vgc(rt2x00dev, qual, vgc);
|
|
}
|
|
EXPORT_SYMBOL_GPL(rt2800_link_tuner);
|
|
|
|
/*
|
|
* Initialization functions.
|
|
*/
|
|
static int rt2800_init_registers(struct rt2x00_dev *rt2x00dev)
|
|
{
|
|
struct rt2800_drv_data *drv_data = rt2x00dev->drv_data;
|
|
u32 reg;
|
|
u16 eeprom;
|
|
unsigned int i;
|
|
int ret;
|
|
|
|
rt2800_disable_wpdma(rt2x00dev);
|
|
|
|
ret = rt2800_drv_init_registers(rt2x00dev);
|
|
if (ret)
|
|
return ret;
|
|
|
|
rt2800_register_write(rt2x00dev, LEGACY_BASIC_RATE, 0x0000013f);
|
|
rt2800_register_write(rt2x00dev, HT_BASIC_RATE, 0x00008003);
|
|
|
|
rt2800_register_write(rt2x00dev, MAC_SYS_CTRL, 0x00000000);
|
|
|
|
reg = rt2800_register_read(rt2x00dev, BCN_TIME_CFG);
|
|
rt2x00_set_field32(®, BCN_TIME_CFG_BEACON_INTERVAL, 1600);
|
|
rt2x00_set_field32(®, BCN_TIME_CFG_TSF_TICKING, 0);
|
|
rt2x00_set_field32(®, BCN_TIME_CFG_TSF_SYNC, 0);
|
|
rt2x00_set_field32(®, BCN_TIME_CFG_TBTT_ENABLE, 0);
|
|
rt2x00_set_field32(®, BCN_TIME_CFG_BEACON_GEN, 0);
|
|
rt2x00_set_field32(®, BCN_TIME_CFG_TX_TIME_COMPENSATE, 0);
|
|
rt2800_register_write(rt2x00dev, BCN_TIME_CFG, reg);
|
|
|
|
rt2800_config_filter(rt2x00dev, FIF_ALLMULTI);
|
|
|
|
reg = rt2800_register_read(rt2x00dev, BKOFF_SLOT_CFG);
|
|
rt2x00_set_field32(®, BKOFF_SLOT_CFG_SLOT_TIME, 9);
|
|
rt2x00_set_field32(®, BKOFF_SLOT_CFG_CC_DELAY_TIME, 2);
|
|
rt2800_register_write(rt2x00dev, BKOFF_SLOT_CFG, reg);
|
|
|
|
if (rt2x00_rt(rt2x00dev, RT3290)) {
|
|
reg = rt2800_register_read(rt2x00dev, WLAN_FUN_CTRL);
|
|
if (rt2x00_get_field32(reg, WLAN_EN) == 1) {
|
|
rt2x00_set_field32(®, PCIE_APP0_CLK_REQ, 1);
|
|
rt2800_register_write(rt2x00dev, WLAN_FUN_CTRL, reg);
|
|
}
|
|
|
|
reg = rt2800_register_read(rt2x00dev, CMB_CTRL);
|
|
if (!(rt2x00_get_field32(reg, LDO0_EN) == 1)) {
|
|
rt2x00_set_field32(®, LDO0_EN, 1);
|
|
rt2x00_set_field32(®, LDO_BGSEL, 3);
|
|
rt2800_register_write(rt2x00dev, CMB_CTRL, reg);
|
|
}
|
|
|
|
reg = rt2800_register_read(rt2x00dev, OSC_CTRL);
|
|
rt2x00_set_field32(®, OSC_ROSC_EN, 1);
|
|
rt2x00_set_field32(®, OSC_CAL_REQ, 1);
|
|
rt2x00_set_field32(®, OSC_REF_CYCLE, 0x27);
|
|
rt2800_register_write(rt2x00dev, OSC_CTRL, reg);
|
|
|
|
reg = rt2800_register_read(rt2x00dev, COEX_CFG0);
|
|
rt2x00_set_field32(®, COEX_CFG_ANT, 0x5e);
|
|
rt2800_register_write(rt2x00dev, COEX_CFG0, reg);
|
|
|
|
reg = rt2800_register_read(rt2x00dev, COEX_CFG2);
|
|
rt2x00_set_field32(®, BT_COEX_CFG1, 0x00);
|
|
rt2x00_set_field32(®, BT_COEX_CFG0, 0x17);
|
|
rt2x00_set_field32(®, WL_COEX_CFG1, 0x93);
|
|
rt2x00_set_field32(®, WL_COEX_CFG0, 0x7f);
|
|
rt2800_register_write(rt2x00dev, COEX_CFG2, reg);
|
|
|
|
reg = rt2800_register_read(rt2x00dev, PLL_CTRL);
|
|
rt2x00_set_field32(®, PLL_CONTROL, 1);
|
|
rt2800_register_write(rt2x00dev, PLL_CTRL, reg);
|
|
}
|
|
|
|
if (rt2x00_rt(rt2x00dev, RT3071) ||
|
|
rt2x00_rt(rt2x00dev, RT3090) ||
|
|
rt2x00_rt(rt2x00dev, RT3290) ||
|
|
rt2x00_rt(rt2x00dev, RT3390)) {
|
|
|
|
if (rt2x00_rt(rt2x00dev, RT3290))
|
|
rt2800_register_write(rt2x00dev, TX_SW_CFG0,
|
|
0x00000404);
|
|
else
|
|
rt2800_register_write(rt2x00dev, TX_SW_CFG0,
|
|
0x00000400);
|
|
|
|
rt2800_register_write(rt2x00dev, TX_SW_CFG1, 0x00000000);
|
|
if (rt2x00_rt_rev_lt(rt2x00dev, RT3071, REV_RT3071E) ||
|
|
rt2x00_rt_rev_lt(rt2x00dev, RT3090, REV_RT3090E) ||
|
|
rt2x00_rt_rev_lt(rt2x00dev, RT3390, REV_RT3390E)) {
|
|
eeprom = rt2800_eeprom_read(rt2x00dev, EEPROM_NIC_CONF1);
|
|
if (rt2x00_get_field16(eeprom, EEPROM_NIC_CONF1_DAC_TEST))
|
|
rt2800_register_write(rt2x00dev, TX_SW_CFG2,
|
|
0x0000002c);
|
|
else
|
|
rt2800_register_write(rt2x00dev, TX_SW_CFG2,
|
|
0x0000000f);
|
|
} else {
|
|
rt2800_register_write(rt2x00dev, TX_SW_CFG2, 0x00000000);
|
|
}
|
|
} else if (rt2x00_rt(rt2x00dev, RT3070)) {
|
|
rt2800_register_write(rt2x00dev, TX_SW_CFG0, 0x00000400);
|
|
|
|
if (rt2x00_rt_rev_lt(rt2x00dev, RT3070, REV_RT3070F)) {
|
|
rt2800_register_write(rt2x00dev, TX_SW_CFG1, 0x00000000);
|
|
rt2800_register_write(rt2x00dev, TX_SW_CFG2, 0x0000002c);
|
|
} else {
|
|
rt2800_register_write(rt2x00dev, TX_SW_CFG1, 0x00080606);
|
|
rt2800_register_write(rt2x00dev, TX_SW_CFG2, 0x00000000);
|
|
}
|
|
} else if (rt2800_is_305x_soc(rt2x00dev)) {
|
|
rt2800_register_write(rt2x00dev, TX_SW_CFG0, 0x00000400);
|
|
rt2800_register_write(rt2x00dev, TX_SW_CFG1, 0x00000000);
|
|
rt2800_register_write(rt2x00dev, TX_SW_CFG2, 0x00000030);
|
|
} else if (rt2x00_rt(rt2x00dev, RT3352)) {
|
|
rt2800_register_write(rt2x00dev, TX_SW_CFG0, 0x00000402);
|
|
rt2800_register_write(rt2x00dev, TX_SW_CFG1, 0x00080606);
|
|
rt2800_register_write(rt2x00dev, TX_SW_CFG2, 0x00000000);
|
|
} else if (rt2x00_rt(rt2x00dev, RT3572)) {
|
|
rt2800_register_write(rt2x00dev, TX_SW_CFG0, 0x00000400);
|
|
rt2800_register_write(rt2x00dev, TX_SW_CFG1, 0x00080606);
|
|
} else if (rt2x00_rt(rt2x00dev, RT3593)) {
|
|
rt2800_register_write(rt2x00dev, TX_SW_CFG0, 0x00000402);
|
|
rt2800_register_write(rt2x00dev, TX_SW_CFG1, 0x00000000);
|
|
if (rt2x00_rt_rev_lt(rt2x00dev, RT3593, REV_RT3593E)) {
|
|
eeprom = rt2800_eeprom_read(rt2x00dev, EEPROM_NIC_CONF1);
|
|
if (rt2x00_get_field16(eeprom,
|
|
EEPROM_NIC_CONF1_DAC_TEST))
|
|
rt2800_register_write(rt2x00dev, TX_SW_CFG2,
|
|
0x0000001f);
|
|
else
|
|
rt2800_register_write(rt2x00dev, TX_SW_CFG2,
|
|
0x0000000f);
|
|
} else {
|
|
rt2800_register_write(rt2x00dev, TX_SW_CFG2,
|
|
0x00000000);
|
|
}
|
|
} else if (rt2x00_rt(rt2x00dev, RT3883)) {
|
|
rt2800_register_write(rt2x00dev, TX_SW_CFG0, 0x00000402);
|
|
rt2800_register_write(rt2x00dev, TX_SW_CFG1, 0x00000000);
|
|
rt2800_register_write(rt2x00dev, TX_SW_CFG2, 0x00040000);
|
|
rt2800_register_write(rt2x00dev, TX_TXBF_CFG_0, 0x8000fc21);
|
|
rt2800_register_write(rt2x00dev, TX_TXBF_CFG_3, 0x00009c40);
|
|
} else if (rt2x00_rt(rt2x00dev, RT5390) ||
|
|
rt2x00_rt(rt2x00dev, RT5392)) {
|
|
rt2800_register_write(rt2x00dev, TX_SW_CFG0, 0x00000404);
|
|
rt2800_register_write(rt2x00dev, TX_SW_CFG1, 0x00080606);
|
|
rt2800_register_write(rt2x00dev, TX_SW_CFG2, 0x00000000);
|
|
} else if (rt2x00_rt(rt2x00dev, RT5592)) {
|
|
rt2800_register_write(rt2x00dev, TX_SW_CFG0, 0x00000404);
|
|
rt2800_register_write(rt2x00dev, TX_SW_CFG1, 0x00000000);
|
|
rt2800_register_write(rt2x00dev, TX_SW_CFG2, 0x00000000);
|
|
} else if (rt2x00_rt(rt2x00dev, RT5350)) {
|
|
rt2800_register_write(rt2x00dev, TX_SW_CFG0, 0x00000404);
|
|
} else if (rt2x00_rt(rt2x00dev, RT6352)) {
|
|
rt2800_register_write(rt2x00dev, TX_SW_CFG0, 0x00000401);
|
|
rt2800_register_write(rt2x00dev, TX_SW_CFG1, 0x000C0001);
|
|
rt2800_register_write(rt2x00dev, TX_SW_CFG2, 0x00000000);
|
|
rt2800_register_write(rt2x00dev, TX_ALC_VGA3, 0x00000000);
|
|
rt2800_register_write(rt2x00dev, TX0_BB_GAIN_ATTEN, 0x0);
|
|
rt2800_register_write(rt2x00dev, TX1_BB_GAIN_ATTEN, 0x0);
|
|
rt2800_register_write(rt2x00dev, TX0_RF_GAIN_ATTEN, 0x6C6C666C);
|
|
rt2800_register_write(rt2x00dev, TX1_RF_GAIN_ATTEN, 0x6C6C666C);
|
|
rt2800_register_write(rt2x00dev, TX0_RF_GAIN_CORRECT,
|
|
0x3630363A);
|
|
rt2800_register_write(rt2x00dev, TX1_RF_GAIN_CORRECT,
|
|
0x3630363A);
|
|
reg = rt2800_register_read(rt2x00dev, TX_ALC_CFG_1);
|
|
rt2x00_set_field32(®, TX_ALC_CFG_1_ROS_BUSY_EN, 0);
|
|
rt2800_register_write(rt2x00dev, TX_ALC_CFG_1, reg);
|
|
} else {
|
|
rt2800_register_write(rt2x00dev, TX_SW_CFG0, 0x00000000);
|
|
rt2800_register_write(rt2x00dev, TX_SW_CFG1, 0x00080606);
|
|
}
|
|
|
|
reg = rt2800_register_read(rt2x00dev, TX_LINK_CFG);
|
|
rt2x00_set_field32(®, TX_LINK_CFG_REMOTE_MFB_LIFETIME, 32);
|
|
rt2x00_set_field32(®, TX_LINK_CFG_MFB_ENABLE, 0);
|
|
rt2x00_set_field32(®, TX_LINK_CFG_REMOTE_UMFS_ENABLE, 0);
|
|
rt2x00_set_field32(®, TX_LINK_CFG_TX_MRQ_EN, 0);
|
|
rt2x00_set_field32(®, TX_LINK_CFG_TX_RDG_EN, 0);
|
|
rt2x00_set_field32(®, TX_LINK_CFG_TX_CF_ACK_EN, 1);
|
|
rt2x00_set_field32(®, TX_LINK_CFG_REMOTE_MFB, 0);
|
|
rt2x00_set_field32(®, TX_LINK_CFG_REMOTE_MFS, 0);
|
|
rt2800_register_write(rt2x00dev, TX_LINK_CFG, reg);
|
|
|
|
reg = rt2800_register_read(rt2x00dev, TX_TIMEOUT_CFG);
|
|
rt2x00_set_field32(®, TX_TIMEOUT_CFG_MPDU_LIFETIME, 9);
|
|
rt2x00_set_field32(®, TX_TIMEOUT_CFG_RX_ACK_TIMEOUT, 32);
|
|
rt2x00_set_field32(®, TX_TIMEOUT_CFG_TX_OP_TIMEOUT, 10);
|
|
rt2800_register_write(rt2x00dev, TX_TIMEOUT_CFG, reg);
|
|
|
|
reg = rt2800_register_read(rt2x00dev, MAX_LEN_CFG);
|
|
rt2x00_set_field32(®, MAX_LEN_CFG_MAX_MPDU, AGGREGATION_SIZE);
|
|
if (rt2x00_is_usb(rt2x00dev)) {
|
|
drv_data->max_psdu = 3;
|
|
} else if (rt2x00_rt_rev_gte(rt2x00dev, RT2872, REV_RT2872E) ||
|
|
rt2x00_rt(rt2x00dev, RT2883) ||
|
|
rt2x00_rt_rev_lt(rt2x00dev, RT3070, REV_RT3070E)) {
|
|
drv_data->max_psdu = 2;
|
|
} else {
|
|
drv_data->max_psdu = 1;
|
|
}
|
|
rt2x00_set_field32(®, MAX_LEN_CFG_MAX_PSDU, drv_data->max_psdu);
|
|
rt2x00_set_field32(®, MAX_LEN_CFG_MIN_PSDU, 10);
|
|
rt2x00_set_field32(®, MAX_LEN_CFG_MIN_MPDU, 10);
|
|
rt2800_register_write(rt2x00dev, MAX_LEN_CFG, reg);
|
|
|
|
reg = rt2800_register_read(rt2x00dev, LED_CFG);
|
|
rt2x00_set_field32(®, LED_CFG_ON_PERIOD, 70);
|
|
rt2x00_set_field32(®, LED_CFG_OFF_PERIOD, 30);
|
|
rt2x00_set_field32(®, LED_CFG_SLOW_BLINK_PERIOD, 3);
|
|
rt2x00_set_field32(®, LED_CFG_R_LED_MODE, 3);
|
|
rt2x00_set_field32(®, LED_CFG_G_LED_MODE, 3);
|
|
rt2x00_set_field32(®, LED_CFG_Y_LED_MODE, 3);
|
|
rt2x00_set_field32(®, LED_CFG_LED_POLAR, 1);
|
|
rt2800_register_write(rt2x00dev, LED_CFG, reg);
|
|
|
|
rt2800_register_write(rt2x00dev, PBF_MAX_PCNT, 0x1f3fbf9f);
|
|
|
|
reg = rt2800_register_read(rt2x00dev, TX_RTY_CFG);
|
|
rt2x00_set_field32(®, TX_RTY_CFG_SHORT_RTY_LIMIT, 2);
|
|
rt2x00_set_field32(®, TX_RTY_CFG_LONG_RTY_LIMIT, 2);
|
|
rt2x00_set_field32(®, TX_RTY_CFG_LONG_RTY_THRE, 2000);
|
|
rt2x00_set_field32(®, TX_RTY_CFG_NON_AGG_RTY_MODE, 0);
|
|
rt2x00_set_field32(®, TX_RTY_CFG_AGG_RTY_MODE, 0);
|
|
rt2x00_set_field32(®, TX_RTY_CFG_TX_AUTO_FB_ENABLE, 1);
|
|
rt2800_register_write(rt2x00dev, TX_RTY_CFG, reg);
|
|
|
|
reg = rt2800_register_read(rt2x00dev, AUTO_RSP_CFG);
|
|
rt2x00_set_field32(®, AUTO_RSP_CFG_AUTORESPONDER, 1);
|
|
rt2x00_set_field32(®, AUTO_RSP_CFG_BAC_ACK_POLICY, 1);
|
|
rt2x00_set_field32(®, AUTO_RSP_CFG_CTS_40_MMODE, 1);
|
|
rt2x00_set_field32(®, AUTO_RSP_CFG_CTS_40_MREF, 0);
|
|
rt2x00_set_field32(®, AUTO_RSP_CFG_AR_PREAMBLE, 0);
|
|
rt2x00_set_field32(®, AUTO_RSP_CFG_DUAL_CTS_EN, 0);
|
|
rt2x00_set_field32(®, AUTO_RSP_CFG_ACK_CTS_PSM_BIT, 0);
|
|
rt2800_register_write(rt2x00dev, AUTO_RSP_CFG, reg);
|
|
|
|
reg = rt2800_register_read(rt2x00dev, CCK_PROT_CFG);
|
|
rt2x00_set_field32(®, CCK_PROT_CFG_PROTECT_RATE, 3);
|
|
rt2x00_set_field32(®, CCK_PROT_CFG_PROTECT_CTRL, 0);
|
|
rt2x00_set_field32(®, CCK_PROT_CFG_PROTECT_NAV_SHORT, 1);
|
|
rt2x00_set_field32(®, CCK_PROT_CFG_TX_OP_ALLOW_CCK, 1);
|
|
rt2x00_set_field32(®, CCK_PROT_CFG_TX_OP_ALLOW_OFDM, 1);
|
|
rt2x00_set_field32(®, CCK_PROT_CFG_TX_OP_ALLOW_MM20, 1);
|
|
rt2x00_set_field32(®, CCK_PROT_CFG_TX_OP_ALLOW_MM40, 0);
|
|
rt2x00_set_field32(®, CCK_PROT_CFG_TX_OP_ALLOW_GF20, 1);
|
|
rt2x00_set_field32(®, CCK_PROT_CFG_TX_OP_ALLOW_GF40, 0);
|
|
rt2x00_set_field32(®, CCK_PROT_CFG_RTS_TH_EN, 1);
|
|
rt2800_register_write(rt2x00dev, CCK_PROT_CFG, reg);
|
|
|
|
reg = rt2800_register_read(rt2x00dev, OFDM_PROT_CFG);
|
|
rt2x00_set_field32(®, OFDM_PROT_CFG_PROTECT_RATE, 3);
|
|
rt2x00_set_field32(®, OFDM_PROT_CFG_PROTECT_CTRL, 0);
|
|
rt2x00_set_field32(®, OFDM_PROT_CFG_PROTECT_NAV_SHORT, 1);
|
|
rt2x00_set_field32(®, OFDM_PROT_CFG_TX_OP_ALLOW_CCK, 1);
|
|
rt2x00_set_field32(®, OFDM_PROT_CFG_TX_OP_ALLOW_OFDM, 1);
|
|
rt2x00_set_field32(®, OFDM_PROT_CFG_TX_OP_ALLOW_MM20, 1);
|
|
rt2x00_set_field32(®, OFDM_PROT_CFG_TX_OP_ALLOW_MM40, 0);
|
|
rt2x00_set_field32(®, OFDM_PROT_CFG_TX_OP_ALLOW_GF20, 1);
|
|
rt2x00_set_field32(®, OFDM_PROT_CFG_TX_OP_ALLOW_GF40, 0);
|
|
rt2x00_set_field32(®, OFDM_PROT_CFG_RTS_TH_EN, 1);
|
|
rt2800_register_write(rt2x00dev, OFDM_PROT_CFG, reg);
|
|
|
|
reg = rt2800_register_read(rt2x00dev, MM20_PROT_CFG);
|
|
rt2x00_set_field32(®, MM20_PROT_CFG_PROTECT_RATE, 0x4004);
|
|
rt2x00_set_field32(®, MM20_PROT_CFG_PROTECT_CTRL, 1);
|
|
rt2x00_set_field32(®, MM20_PROT_CFG_PROTECT_NAV_SHORT, 1);
|
|
rt2x00_set_field32(®, MM20_PROT_CFG_TX_OP_ALLOW_CCK, 0);
|
|
rt2x00_set_field32(®, MM20_PROT_CFG_TX_OP_ALLOW_OFDM, 1);
|
|
rt2x00_set_field32(®, MM20_PROT_CFG_TX_OP_ALLOW_MM20, 1);
|
|
rt2x00_set_field32(®, MM20_PROT_CFG_TX_OP_ALLOW_MM40, 0);
|
|
rt2x00_set_field32(®, MM20_PROT_CFG_TX_OP_ALLOW_GF20, 1);
|
|
rt2x00_set_field32(®, MM20_PROT_CFG_TX_OP_ALLOW_GF40, 0);
|
|
rt2x00_set_field32(®, MM20_PROT_CFG_RTS_TH_EN, 0);
|
|
rt2800_register_write(rt2x00dev, MM20_PROT_CFG, reg);
|
|
|
|
reg = rt2800_register_read(rt2x00dev, MM40_PROT_CFG);
|
|
rt2x00_set_field32(®, MM40_PROT_CFG_PROTECT_RATE, 0x4084);
|
|
rt2x00_set_field32(®, MM40_PROT_CFG_PROTECT_CTRL, 1);
|
|
rt2x00_set_field32(®, MM40_PROT_CFG_PROTECT_NAV_SHORT, 1);
|
|
rt2x00_set_field32(®, MM40_PROT_CFG_TX_OP_ALLOW_CCK, 0);
|
|
rt2x00_set_field32(®, MM40_PROT_CFG_TX_OP_ALLOW_OFDM, 1);
|
|
rt2x00_set_field32(®, MM40_PROT_CFG_TX_OP_ALLOW_MM20, 1);
|
|
rt2x00_set_field32(®, MM40_PROT_CFG_TX_OP_ALLOW_MM40, 1);
|
|
rt2x00_set_field32(®, MM40_PROT_CFG_TX_OP_ALLOW_GF20, 1);
|
|
rt2x00_set_field32(®, MM40_PROT_CFG_TX_OP_ALLOW_GF40, 1);
|
|
rt2x00_set_field32(®, MM40_PROT_CFG_RTS_TH_EN, 0);
|
|
rt2800_register_write(rt2x00dev, MM40_PROT_CFG, reg);
|
|
|
|
reg = rt2800_register_read(rt2x00dev, GF20_PROT_CFG);
|
|
rt2x00_set_field32(®, GF20_PROT_CFG_PROTECT_RATE, 0x4004);
|
|
rt2x00_set_field32(®, GF20_PROT_CFG_PROTECT_CTRL, 1);
|
|
rt2x00_set_field32(®, GF20_PROT_CFG_PROTECT_NAV_SHORT, 1);
|
|
rt2x00_set_field32(®, GF20_PROT_CFG_TX_OP_ALLOW_CCK, 0);
|
|
rt2x00_set_field32(®, GF20_PROT_CFG_TX_OP_ALLOW_OFDM, 1);
|
|
rt2x00_set_field32(®, GF20_PROT_CFG_TX_OP_ALLOW_MM20, 1);
|
|
rt2x00_set_field32(®, GF20_PROT_CFG_TX_OP_ALLOW_MM40, 0);
|
|
rt2x00_set_field32(®, GF20_PROT_CFG_TX_OP_ALLOW_GF20, 1);
|
|
rt2x00_set_field32(®, GF20_PROT_CFG_TX_OP_ALLOW_GF40, 0);
|
|
rt2x00_set_field32(®, GF20_PROT_CFG_RTS_TH_EN, 0);
|
|
rt2800_register_write(rt2x00dev, GF20_PROT_CFG, reg);
|
|
|
|
reg = rt2800_register_read(rt2x00dev, GF40_PROT_CFG);
|
|
rt2x00_set_field32(®, GF40_PROT_CFG_PROTECT_RATE, 0x4084);
|
|
rt2x00_set_field32(®, GF40_PROT_CFG_PROTECT_CTRL, 1);
|
|
rt2x00_set_field32(®, GF40_PROT_CFG_PROTECT_NAV_SHORT, 1);
|
|
rt2x00_set_field32(®, GF40_PROT_CFG_TX_OP_ALLOW_CCK, 0);
|
|
rt2x00_set_field32(®, GF40_PROT_CFG_TX_OP_ALLOW_OFDM, 1);
|
|
rt2x00_set_field32(®, GF40_PROT_CFG_TX_OP_ALLOW_MM20, 1);
|
|
rt2x00_set_field32(®, GF40_PROT_CFG_TX_OP_ALLOW_MM40, 1);
|
|
rt2x00_set_field32(®, GF40_PROT_CFG_TX_OP_ALLOW_GF20, 1);
|
|
rt2x00_set_field32(®, GF40_PROT_CFG_TX_OP_ALLOW_GF40, 1);
|
|
rt2x00_set_field32(®, GF40_PROT_CFG_RTS_TH_EN, 0);
|
|
rt2800_register_write(rt2x00dev, GF40_PROT_CFG, reg);
|
|
|
|
if (rt2x00_is_usb(rt2x00dev)) {
|
|
rt2800_register_write(rt2x00dev, PBF_CFG, 0xf40006);
|
|
|
|
reg = rt2800_register_read(rt2x00dev, WPDMA_GLO_CFG);
|
|
rt2x00_set_field32(®, WPDMA_GLO_CFG_ENABLE_TX_DMA, 0);
|
|
rt2x00_set_field32(®, WPDMA_GLO_CFG_TX_DMA_BUSY, 0);
|
|
rt2x00_set_field32(®, WPDMA_GLO_CFG_ENABLE_RX_DMA, 0);
|
|
rt2x00_set_field32(®, WPDMA_GLO_CFG_RX_DMA_BUSY, 0);
|
|
rt2x00_set_field32(®, WPDMA_GLO_CFG_WP_DMA_BURST_SIZE, 3);
|
|
rt2x00_set_field32(®, WPDMA_GLO_CFG_TX_WRITEBACK_DONE, 0);
|
|
rt2x00_set_field32(®, WPDMA_GLO_CFG_BIG_ENDIAN, 0);
|
|
rt2x00_set_field32(®, WPDMA_GLO_CFG_RX_HDR_SCATTER, 0);
|
|
rt2x00_set_field32(®, WPDMA_GLO_CFG_HDR_SEG_LEN, 0);
|
|
rt2800_register_write(rt2x00dev, WPDMA_GLO_CFG, reg);
|
|
}
|
|
|
|
/*
|
|
* The legacy driver also sets TXOP_CTRL_CFG_RESERVED_TRUN_EN to 1
|
|
* although it is reserved.
|
|
*/
|
|
reg = rt2800_register_read(rt2x00dev, TXOP_CTRL_CFG);
|
|
rt2x00_set_field32(®, TXOP_CTRL_CFG_TIMEOUT_TRUN_EN, 1);
|
|
rt2x00_set_field32(®, TXOP_CTRL_CFG_AC_TRUN_EN, 1);
|
|
rt2x00_set_field32(®, TXOP_CTRL_CFG_TXRATEGRP_TRUN_EN, 1);
|
|
rt2x00_set_field32(®, TXOP_CTRL_CFG_USER_MODE_TRUN_EN, 1);
|
|
rt2x00_set_field32(®, TXOP_CTRL_CFG_MIMO_PS_TRUN_EN, 1);
|
|
rt2x00_set_field32(®, TXOP_CTRL_CFG_RESERVED_TRUN_EN, 1);
|
|
rt2x00_set_field32(®, TXOP_CTRL_CFG_LSIG_TXOP_EN, 0);
|
|
rt2x00_set_field32(®, TXOP_CTRL_CFG_EXT_CCA_EN, 0);
|
|
rt2x00_set_field32(®, TXOP_CTRL_CFG_EXT_CCA_DLY, 88);
|
|
rt2x00_set_field32(®, TXOP_CTRL_CFG_EXT_CWMIN, 0);
|
|
rt2800_register_write(rt2x00dev, TXOP_CTRL_CFG, reg);
|
|
|
|
reg = rt2x00_rt(rt2x00dev, RT5592) ? 0x00000082 : 0x00000002;
|
|
rt2800_register_write(rt2x00dev, TXOP_HLDR_ET, reg);
|
|
|
|
if (rt2x00_rt(rt2x00dev, RT3883)) {
|
|
rt2800_register_write(rt2x00dev, TX_FBK_CFG_3S_0, 0x12111008);
|
|
rt2800_register_write(rt2x00dev, TX_FBK_CFG_3S_1, 0x16151413);
|
|
}
|
|
|
|
reg = rt2800_register_read(rt2x00dev, TX_RTS_CFG);
|
|
rt2x00_set_field32(®, TX_RTS_CFG_AUTO_RTS_RETRY_LIMIT, 7);
|
|
rt2x00_set_field32(®, TX_RTS_CFG_RTS_THRES,
|
|
IEEE80211_MAX_RTS_THRESHOLD);
|
|
rt2x00_set_field32(®, TX_RTS_CFG_RTS_FBK_EN, 1);
|
|
rt2800_register_write(rt2x00dev, TX_RTS_CFG, reg);
|
|
|
|
rt2800_register_write(rt2x00dev, EXP_ACK_TIME, 0x002400ca);
|
|
|
|
/*
|
|
* Usually the CCK SIFS time should be set to 10 and the OFDM SIFS
|
|
* time should be set to 16. However, the original Ralink driver uses
|
|
* 16 for both and indeed using a value of 10 for CCK SIFS results in
|
|
* connection problems with 11g + CTS protection. Hence, use the same
|
|
* defaults as the Ralink driver: 16 for both, CCK and OFDM SIFS.
|
|
*/
|
|
reg = rt2800_register_read(rt2x00dev, XIFS_TIME_CFG);
|
|
rt2x00_set_field32(®, XIFS_TIME_CFG_CCKM_SIFS_TIME, 16);
|
|
rt2x00_set_field32(®, XIFS_TIME_CFG_OFDM_SIFS_TIME, 16);
|
|
rt2x00_set_field32(®, XIFS_TIME_CFG_OFDM_XIFS_TIME, 4);
|
|
rt2x00_set_field32(®, XIFS_TIME_CFG_EIFS, 314);
|
|
rt2x00_set_field32(®, XIFS_TIME_CFG_BB_RXEND_ENABLE, 1);
|
|
rt2800_register_write(rt2x00dev, XIFS_TIME_CFG, reg);
|
|
|
|
rt2800_register_write(rt2x00dev, PWR_PIN_CFG, 0x00000003);
|
|
|
|
/*
|
|
* ASIC will keep garbage value after boot, clear encryption keys.
|
|
*/
|
|
for (i = 0; i < 4; i++)
|
|
rt2800_register_write(rt2x00dev, SHARED_KEY_MODE_ENTRY(i), 0);
|
|
|
|
for (i = 0; i < 256; i++) {
|
|
rt2800_config_wcid(rt2x00dev, NULL, i);
|
|
rt2800_delete_wcid_attr(rt2x00dev, i);
|
|
}
|
|
|
|
/*
|
|
* Clear encryption initialization vectors on start, but keep them
|
|
* for watchdog reset. Otherwise we will have wrong IVs and not be
|
|
* able to keep connections after reset.
|
|
*/
|
|
if (!test_bit(DEVICE_STATE_RESET, &rt2x00dev->flags))
|
|
for (i = 0; i < 256; i++)
|
|
rt2800_register_write(rt2x00dev, MAC_IVEIV_ENTRY(i), 0);
|
|
|
|
/*
|
|
* Clear all beacons
|
|
*/
|
|
for (i = 0; i < 8; i++)
|
|
rt2800_clear_beacon_register(rt2x00dev, i);
|
|
|
|
if (rt2x00_is_usb(rt2x00dev)) {
|
|
reg = rt2800_register_read(rt2x00dev, US_CYC_CNT);
|
|
rt2x00_set_field32(®, US_CYC_CNT_CLOCK_CYCLE, 30);
|
|
rt2800_register_write(rt2x00dev, US_CYC_CNT, reg);
|
|
} else if (rt2x00_is_pcie(rt2x00dev)) {
|
|
reg = rt2800_register_read(rt2x00dev, US_CYC_CNT);
|
|
rt2x00_set_field32(®, US_CYC_CNT_CLOCK_CYCLE, 125);
|
|
rt2800_register_write(rt2x00dev, US_CYC_CNT, reg);
|
|
} else if (rt2x00_is_soc(rt2x00dev)) {
|
|
struct clk *clk = clk_get_sys("bus", NULL);
|
|
int rate;
|
|
|
|
if (IS_ERR(clk)) {
|
|
clk = clk_get_sys("cpu", NULL);
|
|
|
|
if (IS_ERR(clk)) {
|
|
rate = 125;
|
|
} else {
|
|
rate = clk_get_rate(clk) / 3000000;
|
|
clk_put(clk);
|
|
}
|
|
} else {
|
|
rate = clk_get_rate(clk) / 1000000;
|
|
clk_put(clk);
|
|
}
|
|
|
|
reg = rt2800_register_read(rt2x00dev, US_CYC_CNT);
|
|
rt2x00_set_field32(®, US_CYC_CNT_CLOCK_CYCLE, rate);
|
|
rt2800_register_write(rt2x00dev, US_CYC_CNT, reg);
|
|
}
|
|
|
|
reg = rt2800_register_read(rt2x00dev, HT_FBK_CFG0);
|
|
rt2x00_set_field32(®, HT_FBK_CFG0_HTMCS0FBK, 0);
|
|
rt2x00_set_field32(®, HT_FBK_CFG0_HTMCS1FBK, 0);
|
|
rt2x00_set_field32(®, HT_FBK_CFG0_HTMCS2FBK, 1);
|
|
rt2x00_set_field32(®, HT_FBK_CFG0_HTMCS3FBK, 2);
|
|
rt2x00_set_field32(®, HT_FBK_CFG0_HTMCS4FBK, 3);
|
|
rt2x00_set_field32(®, HT_FBK_CFG0_HTMCS5FBK, 4);
|
|
rt2x00_set_field32(®, HT_FBK_CFG0_HTMCS6FBK, 5);
|
|
rt2x00_set_field32(®, HT_FBK_CFG0_HTMCS7FBK, 6);
|
|
rt2800_register_write(rt2x00dev, HT_FBK_CFG0, reg);
|
|
|
|
reg = rt2800_register_read(rt2x00dev, HT_FBK_CFG1);
|
|
rt2x00_set_field32(®, HT_FBK_CFG1_HTMCS8FBK, 8);
|
|
rt2x00_set_field32(®, HT_FBK_CFG1_HTMCS9FBK, 8);
|
|
rt2x00_set_field32(®, HT_FBK_CFG1_HTMCS10FBK, 9);
|
|
rt2x00_set_field32(®, HT_FBK_CFG1_HTMCS11FBK, 10);
|
|
rt2x00_set_field32(®, HT_FBK_CFG1_HTMCS12FBK, 11);
|
|
rt2x00_set_field32(®, HT_FBK_CFG1_HTMCS13FBK, 12);
|
|
rt2x00_set_field32(®, HT_FBK_CFG1_HTMCS14FBK, 13);
|
|
rt2x00_set_field32(®, HT_FBK_CFG1_HTMCS15FBK, 14);
|
|
rt2800_register_write(rt2x00dev, HT_FBK_CFG1, reg);
|
|
|
|
reg = rt2800_register_read(rt2x00dev, LG_FBK_CFG0);
|
|
rt2x00_set_field32(®, LG_FBK_CFG0_OFDMMCS0FBK, 8);
|
|
rt2x00_set_field32(®, LG_FBK_CFG0_OFDMMCS1FBK, 8);
|
|
rt2x00_set_field32(®, LG_FBK_CFG0_OFDMMCS2FBK, 9);
|
|
rt2x00_set_field32(®, LG_FBK_CFG0_OFDMMCS3FBK, 10);
|
|
rt2x00_set_field32(®, LG_FBK_CFG0_OFDMMCS4FBK, 11);
|
|
rt2x00_set_field32(®, LG_FBK_CFG0_OFDMMCS5FBK, 12);
|
|
rt2x00_set_field32(®, LG_FBK_CFG0_OFDMMCS6FBK, 13);
|
|
rt2x00_set_field32(®, LG_FBK_CFG0_OFDMMCS7FBK, 14);
|
|
rt2800_register_write(rt2x00dev, LG_FBK_CFG0, reg);
|
|
|
|
reg = rt2800_register_read(rt2x00dev, LG_FBK_CFG1);
|
|
rt2x00_set_field32(®, LG_FBK_CFG0_CCKMCS0FBK, 0);
|
|
rt2x00_set_field32(®, LG_FBK_CFG0_CCKMCS1FBK, 0);
|
|
rt2x00_set_field32(®, LG_FBK_CFG0_CCKMCS2FBK, 1);
|
|
rt2x00_set_field32(®, LG_FBK_CFG0_CCKMCS3FBK, 2);
|
|
rt2800_register_write(rt2x00dev, LG_FBK_CFG1, reg);
|
|
|
|
/*
|
|
* Do not force the BA window size, we use the TXWI to set it
|
|
*/
|
|
reg = rt2800_register_read(rt2x00dev, AMPDU_BA_WINSIZE);
|
|
rt2x00_set_field32(®, AMPDU_BA_WINSIZE_FORCE_WINSIZE_ENABLE, 0);
|
|
rt2x00_set_field32(®, AMPDU_BA_WINSIZE_FORCE_WINSIZE, 0);
|
|
rt2800_register_write(rt2x00dev, AMPDU_BA_WINSIZE, reg);
|
|
|
|
/*
|
|
* We must clear the error counters.
|
|
* These registers are cleared on read,
|
|
* so we may pass a useless variable to store the value.
|
|
*/
|
|
reg = rt2800_register_read(rt2x00dev, RX_STA_CNT0);
|
|
reg = rt2800_register_read(rt2x00dev, RX_STA_CNT1);
|
|
reg = rt2800_register_read(rt2x00dev, RX_STA_CNT2);
|
|
reg = rt2800_register_read(rt2x00dev, TX_STA_CNT0);
|
|
reg = rt2800_register_read(rt2x00dev, TX_STA_CNT1);
|
|
reg = rt2800_register_read(rt2x00dev, TX_STA_CNT2);
|
|
|
|
/*
|
|
* Setup leadtime for pre tbtt interrupt to 6ms
|
|
*/
|
|
reg = rt2800_register_read(rt2x00dev, INT_TIMER_CFG);
|
|
rt2x00_set_field32(®, INT_TIMER_CFG_PRE_TBTT_TIMER, 6 << 4);
|
|
rt2800_register_write(rt2x00dev, INT_TIMER_CFG, reg);
|
|
|
|
/*
|
|
* Set up channel statistics timer
|
|
*/
|
|
reg = rt2800_register_read(rt2x00dev, CH_TIME_CFG);
|
|
rt2x00_set_field32(®, CH_TIME_CFG_EIFS_BUSY, 1);
|
|
rt2x00_set_field32(®, CH_TIME_CFG_NAV_BUSY, 1);
|
|
rt2x00_set_field32(®, CH_TIME_CFG_RX_BUSY, 1);
|
|
rt2x00_set_field32(®, CH_TIME_CFG_TX_BUSY, 1);
|
|
rt2x00_set_field32(®, CH_TIME_CFG_TMR_EN, 1);
|
|
rt2800_register_write(rt2x00dev, CH_TIME_CFG, reg);
|
|
|
|
return 0;
|
|
}
|
|
|
|
|
|
static void rt2800_bbp4_mac_if_ctrl(struct rt2x00_dev *rt2x00dev)
|
|
{
|
|
u8 value;
|
|
|
|
value = rt2800_bbp_read(rt2x00dev, 4);
|
|
rt2x00_set_field8(&value, BBP4_MAC_IF_CTRL, 1);
|
|
rt2800_bbp_write(rt2x00dev, 4, value);
|
|
}
|
|
|
|
static void rt2800_init_freq_calibration(struct rt2x00_dev *rt2x00dev)
|
|
{
|
|
rt2800_bbp_write(rt2x00dev, 142, 1);
|
|
rt2800_bbp_write(rt2x00dev, 143, 57);
|
|
}
|
|
|
|
static void rt2800_init_bbp_5592_glrt(struct rt2x00_dev *rt2x00dev)
|
|
{
|
|
static const u8 glrt_table[] = {
|
|
0xE0, 0x1F, 0X38, 0x32, 0x08, 0x28, 0x19, 0x0A, 0xFF, 0x00, /* 128 ~ 137 */
|
|
0x16, 0x10, 0x10, 0x0B, 0x36, 0x2C, 0x26, 0x24, 0x42, 0x36, /* 138 ~ 147 */
|
|
0x30, 0x2D, 0x4C, 0x46, 0x3D, 0x40, 0x3E, 0x42, 0x3D, 0x40, /* 148 ~ 157 */
|
|
0X3C, 0x34, 0x2C, 0x2F, 0x3C, 0x35, 0x2E, 0x2A, 0x49, 0x41, /* 158 ~ 167 */
|
|
0x36, 0x31, 0x30, 0x30, 0x0E, 0x0D, 0x28, 0x21, 0x1C, 0x16, /* 168 ~ 177 */
|
|
0x50, 0x4A, 0x43, 0x40, 0x10, 0x10, 0x10, 0x10, 0x00, 0x00, /* 178 ~ 187 */
|
|
0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, /* 188 ~ 197 */
|
|
0x00, 0x00, 0x7D, 0x14, 0x32, 0x2C, 0x36, 0x4C, 0x43, 0x2C, /* 198 ~ 207 */
|
|
0x2E, 0x36, 0x30, 0x6E, /* 208 ~ 211 */
|
|
};
|
|
int i;
|
|
|
|
for (i = 0; i < ARRAY_SIZE(glrt_table); i++) {
|
|
rt2800_bbp_write(rt2x00dev, 195, 128 + i);
|
|
rt2800_bbp_write(rt2x00dev, 196, glrt_table[i]);
|
|
}
|
|
};
|
|
|
|
static void rt2800_init_bbp_early(struct rt2x00_dev *rt2x00dev)
|
|
{
|
|
rt2800_bbp_write(rt2x00dev, 65, 0x2C);
|
|
rt2800_bbp_write(rt2x00dev, 66, 0x38);
|
|
rt2800_bbp_write(rt2x00dev, 68, 0x0B);
|
|
rt2800_bbp_write(rt2x00dev, 69, 0x12);
|
|
rt2800_bbp_write(rt2x00dev, 70, 0x0a);
|
|
rt2800_bbp_write(rt2x00dev, 73, 0x10);
|
|
rt2800_bbp_write(rt2x00dev, 81, 0x37);
|
|
rt2800_bbp_write(rt2x00dev, 82, 0x62);
|
|
rt2800_bbp_write(rt2x00dev, 83, 0x6A);
|
|
rt2800_bbp_write(rt2x00dev, 84, 0x99);
|
|
rt2800_bbp_write(rt2x00dev, 86, 0x00);
|
|
rt2800_bbp_write(rt2x00dev, 91, 0x04);
|
|
rt2800_bbp_write(rt2x00dev, 92, 0x00);
|
|
rt2800_bbp_write(rt2x00dev, 103, 0x00);
|
|
rt2800_bbp_write(rt2x00dev, 105, 0x05);
|
|
rt2800_bbp_write(rt2x00dev, 106, 0x35);
|
|
}
|
|
|
|
static void rt2800_disable_unused_dac_adc(struct rt2x00_dev *rt2x00dev)
|
|
{
|
|
u16 eeprom;
|
|
u8 value;
|
|
|
|
value = rt2800_bbp_read(rt2x00dev, 138);
|
|
eeprom = rt2800_eeprom_read(rt2x00dev, EEPROM_NIC_CONF0);
|
|
if (rt2x00_get_field16(eeprom, EEPROM_NIC_CONF0_TXPATH) == 1)
|
|
value |= 0x20;
|
|
if (rt2x00_get_field16(eeprom, EEPROM_NIC_CONF0_RXPATH) == 1)
|
|
value &= ~0x02;
|
|
rt2800_bbp_write(rt2x00dev, 138, value);
|
|
}
|
|
|
|
static void rt2800_init_bbp_305x_soc(struct rt2x00_dev *rt2x00dev)
|
|
{
|
|
rt2800_bbp_write(rt2x00dev, 31, 0x08);
|
|
|
|
rt2800_bbp_write(rt2x00dev, 65, 0x2c);
|
|
rt2800_bbp_write(rt2x00dev, 66, 0x38);
|
|
|
|
rt2800_bbp_write(rt2x00dev, 69, 0x12);
|
|
rt2800_bbp_write(rt2x00dev, 73, 0x10);
|
|
|
|
rt2800_bbp_write(rt2x00dev, 70, 0x0a);
|
|
|
|
rt2800_bbp_write(rt2x00dev, 78, 0x0e);
|
|
rt2800_bbp_write(rt2x00dev, 80, 0x08);
|
|
|
|
rt2800_bbp_write(rt2x00dev, 82, 0x62);
|
|
|
|
rt2800_bbp_write(rt2x00dev, 83, 0x6a);
|
|
|
|
rt2800_bbp_write(rt2x00dev, 84, 0x99);
|
|
|
|
rt2800_bbp_write(rt2x00dev, 86, 0x00);
|
|
|
|
rt2800_bbp_write(rt2x00dev, 91, 0x04);
|
|
|
|
rt2800_bbp_write(rt2x00dev, 92, 0x00);
|
|
|
|
rt2800_bbp_write(rt2x00dev, 103, 0xc0);
|
|
|
|
rt2800_bbp_write(rt2x00dev, 105, 0x01);
|
|
|
|
rt2800_bbp_write(rt2x00dev, 106, 0x35);
|
|
}
|
|
|
|
static void rt2800_init_bbp_28xx(struct rt2x00_dev *rt2x00dev)
|
|
{
|
|
rt2800_bbp_write(rt2x00dev, 65, 0x2c);
|
|
rt2800_bbp_write(rt2x00dev, 66, 0x38);
|
|
|
|
if (rt2x00_rt_rev(rt2x00dev, RT2860, REV_RT2860C)) {
|
|
rt2800_bbp_write(rt2x00dev, 69, 0x16);
|
|
rt2800_bbp_write(rt2x00dev, 73, 0x12);
|
|
} else {
|
|
rt2800_bbp_write(rt2x00dev, 69, 0x12);
|
|
rt2800_bbp_write(rt2x00dev, 73, 0x10);
|
|
}
|
|
|
|
rt2800_bbp_write(rt2x00dev, 70, 0x0a);
|
|
|
|
rt2800_bbp_write(rt2x00dev, 81, 0x37);
|
|
|
|
rt2800_bbp_write(rt2x00dev, 82, 0x62);
|
|
|
|
rt2800_bbp_write(rt2x00dev, 83, 0x6a);
|
|
|
|
if (rt2x00_rt_rev(rt2x00dev, RT2860, REV_RT2860D))
|
|
rt2800_bbp_write(rt2x00dev, 84, 0x19);
|
|
else
|
|
rt2800_bbp_write(rt2x00dev, 84, 0x99);
|
|
|
|
rt2800_bbp_write(rt2x00dev, 86, 0x00);
|
|
|
|
rt2800_bbp_write(rt2x00dev, 91, 0x04);
|
|
|
|
rt2800_bbp_write(rt2x00dev, 92, 0x00);
|
|
|
|
rt2800_bbp_write(rt2x00dev, 103, 0x00);
|
|
|
|
rt2800_bbp_write(rt2x00dev, 105, 0x05);
|
|
|
|
rt2800_bbp_write(rt2x00dev, 106, 0x35);
|
|
}
|
|
|
|
static void rt2800_init_bbp_30xx(struct rt2x00_dev *rt2x00dev)
|
|
{
|
|
rt2800_bbp_write(rt2x00dev, 65, 0x2c);
|
|
rt2800_bbp_write(rt2x00dev, 66, 0x38);
|
|
|
|
rt2800_bbp_write(rt2x00dev, 69, 0x12);
|
|
rt2800_bbp_write(rt2x00dev, 73, 0x10);
|
|
|
|
rt2800_bbp_write(rt2x00dev, 70, 0x0a);
|
|
|
|
rt2800_bbp_write(rt2x00dev, 79, 0x13);
|
|
rt2800_bbp_write(rt2x00dev, 80, 0x05);
|
|
rt2800_bbp_write(rt2x00dev, 81, 0x33);
|
|
|
|
rt2800_bbp_write(rt2x00dev, 82, 0x62);
|
|
|
|
rt2800_bbp_write(rt2x00dev, 83, 0x6a);
|
|
|
|
rt2800_bbp_write(rt2x00dev, 84, 0x99);
|
|
|
|
rt2800_bbp_write(rt2x00dev, 86, 0x00);
|
|
|
|
rt2800_bbp_write(rt2x00dev, 91, 0x04);
|
|
|
|
rt2800_bbp_write(rt2x00dev, 92, 0x00);
|
|
|
|
if (rt2x00_rt_rev_gte(rt2x00dev, RT3070, REV_RT3070F) ||
|
|
rt2x00_rt_rev_gte(rt2x00dev, RT3071, REV_RT3071E) ||
|
|
rt2x00_rt_rev_gte(rt2x00dev, RT3090, REV_RT3090E))
|
|
rt2800_bbp_write(rt2x00dev, 103, 0xc0);
|
|
else
|
|
rt2800_bbp_write(rt2x00dev, 103, 0x00);
|
|
|
|
rt2800_bbp_write(rt2x00dev, 105, 0x05);
|
|
|
|
rt2800_bbp_write(rt2x00dev, 106, 0x35);
|
|
|
|
if (rt2x00_rt(rt2x00dev, RT3071) ||
|
|
rt2x00_rt(rt2x00dev, RT3090))
|
|
rt2800_disable_unused_dac_adc(rt2x00dev);
|
|
}
|
|
|
|
static void rt2800_init_bbp_3290(struct rt2x00_dev *rt2x00dev)
|
|
{
|
|
u8 value;
|
|
|
|
rt2800_bbp4_mac_if_ctrl(rt2x00dev);
|
|
|
|
rt2800_bbp_write(rt2x00dev, 31, 0x08);
|
|
|
|
rt2800_bbp_write(rt2x00dev, 65, 0x2c);
|
|
rt2800_bbp_write(rt2x00dev, 66, 0x38);
|
|
|
|
rt2800_bbp_write(rt2x00dev, 68, 0x0b);
|
|
|
|
rt2800_bbp_write(rt2x00dev, 69, 0x12);
|
|
rt2800_bbp_write(rt2x00dev, 73, 0x13);
|
|
rt2800_bbp_write(rt2x00dev, 75, 0x46);
|
|
rt2800_bbp_write(rt2x00dev, 76, 0x28);
|
|
|
|
rt2800_bbp_write(rt2x00dev, 77, 0x58);
|
|
|
|
rt2800_bbp_write(rt2x00dev, 70, 0x0a);
|
|
|
|
rt2800_bbp_write(rt2x00dev, 74, 0x0b);
|
|
rt2800_bbp_write(rt2x00dev, 79, 0x18);
|
|
rt2800_bbp_write(rt2x00dev, 80, 0x09);
|
|
rt2800_bbp_write(rt2x00dev, 81, 0x33);
|
|
|
|
rt2800_bbp_write(rt2x00dev, 82, 0x62);
|
|
|
|
rt2800_bbp_write(rt2x00dev, 83, 0x7a);
|
|
|
|
rt2800_bbp_write(rt2x00dev, 84, 0x9a);
|
|
|
|
rt2800_bbp_write(rt2x00dev, 86, 0x38);
|
|
|
|
rt2800_bbp_write(rt2x00dev, 91, 0x04);
|
|
|
|
rt2800_bbp_write(rt2x00dev, 92, 0x02);
|
|
|
|
rt2800_bbp_write(rt2x00dev, 103, 0xc0);
|
|
|
|
rt2800_bbp_write(rt2x00dev, 104, 0x92);
|
|
|
|
rt2800_bbp_write(rt2x00dev, 105, 0x1c);
|
|
|
|
rt2800_bbp_write(rt2x00dev, 106, 0x03);
|
|
|
|
rt2800_bbp_write(rt2x00dev, 128, 0x12);
|
|
|
|
rt2800_bbp_write(rt2x00dev, 67, 0x24);
|
|
rt2800_bbp_write(rt2x00dev, 143, 0x04);
|
|
rt2800_bbp_write(rt2x00dev, 142, 0x99);
|
|
rt2800_bbp_write(rt2x00dev, 150, 0x30);
|
|
rt2800_bbp_write(rt2x00dev, 151, 0x2e);
|
|
rt2800_bbp_write(rt2x00dev, 152, 0x20);
|
|
rt2800_bbp_write(rt2x00dev, 153, 0x34);
|
|
rt2800_bbp_write(rt2x00dev, 154, 0x40);
|
|
rt2800_bbp_write(rt2x00dev, 155, 0x3b);
|
|
rt2800_bbp_write(rt2x00dev, 253, 0x04);
|
|
|
|
value = rt2800_bbp_read(rt2x00dev, 47);
|
|
rt2x00_set_field8(&value, BBP47_TSSI_ADC6, 1);
|
|
rt2800_bbp_write(rt2x00dev, 47, value);
|
|
|
|
/* Use 5-bit ADC for Acquisition and 8-bit ADC for data */
|
|
value = rt2800_bbp_read(rt2x00dev, 3);
|
|
rt2x00_set_field8(&value, BBP3_ADC_MODE_SWITCH, 1);
|
|
rt2x00_set_field8(&value, BBP3_ADC_INIT_MODE, 1);
|
|
rt2800_bbp_write(rt2x00dev, 3, value);
|
|
}
|
|
|
|
static void rt2800_init_bbp_3352(struct rt2x00_dev *rt2x00dev)
|
|
{
|
|
rt2800_bbp_write(rt2x00dev, 3, 0x00);
|
|
rt2800_bbp_write(rt2x00dev, 4, 0x50);
|
|
|
|
rt2800_bbp_write(rt2x00dev, 31, 0x08);
|
|
|
|
rt2800_bbp_write(rt2x00dev, 47, 0x48);
|
|
|
|
rt2800_bbp_write(rt2x00dev, 65, 0x2c);
|
|
rt2800_bbp_write(rt2x00dev, 66, 0x38);
|
|
|
|
rt2800_bbp_write(rt2x00dev, 68, 0x0b);
|
|
|
|
rt2800_bbp_write(rt2x00dev, 69, 0x12);
|
|
rt2800_bbp_write(rt2x00dev, 73, 0x13);
|
|
rt2800_bbp_write(rt2x00dev, 75, 0x46);
|
|
rt2800_bbp_write(rt2x00dev, 76, 0x28);
|
|
|
|
rt2800_bbp_write(rt2x00dev, 77, 0x59);
|
|
|
|
rt2800_bbp_write(rt2x00dev, 70, 0x0a);
|
|
|
|
rt2800_bbp_write(rt2x00dev, 78, 0x0e);
|
|
rt2800_bbp_write(rt2x00dev, 80, 0x08);
|
|
rt2800_bbp_write(rt2x00dev, 81, 0x37);
|
|
|
|
rt2800_bbp_write(rt2x00dev, 82, 0x62);
|
|
|
|
if (rt2x00_rt(rt2x00dev, RT5350)) {
|
|
rt2800_bbp_write(rt2x00dev, 83, 0x7a);
|
|
rt2800_bbp_write(rt2x00dev, 84, 0x9a);
|
|
} else {
|
|
rt2800_bbp_write(rt2x00dev, 83, 0x6a);
|
|
rt2800_bbp_write(rt2x00dev, 84, 0x99);
|
|
}
|
|
|
|
rt2800_bbp_write(rt2x00dev, 86, 0x38);
|
|
|
|
rt2800_bbp_write(rt2x00dev, 88, 0x90);
|
|
|
|
rt2800_bbp_write(rt2x00dev, 91, 0x04);
|
|
|
|
rt2800_bbp_write(rt2x00dev, 92, 0x02);
|
|
|
|
rt2800_bbp_write(rt2x00dev, 103, 0xc0);
|
|
|
|
rt2800_bbp_write(rt2x00dev, 104, 0x92);
|
|
|
|
if (rt2x00_rt(rt2x00dev, RT5350)) {
|
|
rt2800_bbp_write(rt2x00dev, 105, 0x3c);
|
|
rt2800_bbp_write(rt2x00dev, 106, 0x03);
|
|
} else {
|
|
rt2800_bbp_write(rt2x00dev, 105, 0x34);
|
|
rt2800_bbp_write(rt2x00dev, 106, 0x05);
|
|
}
|
|
|
|
rt2800_bbp_write(rt2x00dev, 120, 0x50);
|
|
|
|
rt2800_bbp_write(rt2x00dev, 137, 0x0f);
|
|
|
|
rt2800_bbp_write(rt2x00dev, 163, 0xbd);
|
|
/* Set ITxBF timeout to 0x9c40=1000msec */
|
|
rt2800_bbp_write(rt2x00dev, 179, 0x02);
|
|
rt2800_bbp_write(rt2x00dev, 180, 0x00);
|
|
rt2800_bbp_write(rt2x00dev, 182, 0x40);
|
|
rt2800_bbp_write(rt2x00dev, 180, 0x01);
|
|
rt2800_bbp_write(rt2x00dev, 182, 0x9c);
|
|
rt2800_bbp_write(rt2x00dev, 179, 0x00);
|
|
/* Reprogram the inband interface to put right values in RXWI */
|
|
rt2800_bbp_write(rt2x00dev, 142, 0x04);
|
|
rt2800_bbp_write(rt2x00dev, 143, 0x3b);
|
|
rt2800_bbp_write(rt2x00dev, 142, 0x06);
|
|
rt2800_bbp_write(rt2x00dev, 143, 0xa0);
|
|
rt2800_bbp_write(rt2x00dev, 142, 0x07);
|
|
rt2800_bbp_write(rt2x00dev, 143, 0xa1);
|
|
rt2800_bbp_write(rt2x00dev, 142, 0x08);
|
|
rt2800_bbp_write(rt2x00dev, 143, 0xa2);
|
|
|
|
rt2800_bbp_write(rt2x00dev, 148, 0xc8);
|
|
|
|
if (rt2x00_rt(rt2x00dev, RT5350)) {
|
|
/* Antenna Software OFDM */
|
|
rt2800_bbp_write(rt2x00dev, 150, 0x40);
|
|
/* Antenna Software CCK */
|
|
rt2800_bbp_write(rt2x00dev, 151, 0x30);
|
|
rt2800_bbp_write(rt2x00dev, 152, 0xa3);
|
|
/* Clear previously selected antenna */
|
|
rt2800_bbp_write(rt2x00dev, 154, 0);
|
|
}
|
|
}
|
|
|
|
static void rt2800_init_bbp_3390(struct rt2x00_dev *rt2x00dev)
|
|
{
|
|
rt2800_bbp_write(rt2x00dev, 65, 0x2c);
|
|
rt2800_bbp_write(rt2x00dev, 66, 0x38);
|
|
|
|
rt2800_bbp_write(rt2x00dev, 69, 0x12);
|
|
rt2800_bbp_write(rt2x00dev, 73, 0x10);
|
|
|
|
rt2800_bbp_write(rt2x00dev, 70, 0x0a);
|
|
|
|
rt2800_bbp_write(rt2x00dev, 79, 0x13);
|
|
rt2800_bbp_write(rt2x00dev, 80, 0x05);
|
|
rt2800_bbp_write(rt2x00dev, 81, 0x33);
|
|
|
|
rt2800_bbp_write(rt2x00dev, 82, 0x62);
|
|
|
|
rt2800_bbp_write(rt2x00dev, 83, 0x6a);
|
|
|
|
rt2800_bbp_write(rt2x00dev, 84, 0x99);
|
|
|
|
rt2800_bbp_write(rt2x00dev, 86, 0x00);
|
|
|
|
rt2800_bbp_write(rt2x00dev, 91, 0x04);
|
|
|
|
rt2800_bbp_write(rt2x00dev, 92, 0x00);
|
|
|
|
if (rt2x00_rt_rev_gte(rt2x00dev, RT3390, REV_RT3390E))
|
|
rt2800_bbp_write(rt2x00dev, 103, 0xc0);
|
|
else
|
|
rt2800_bbp_write(rt2x00dev, 103, 0x00);
|
|
|
|
rt2800_bbp_write(rt2x00dev, 105, 0x05);
|
|
|
|
rt2800_bbp_write(rt2x00dev, 106, 0x35);
|
|
|
|
rt2800_disable_unused_dac_adc(rt2x00dev);
|
|
}
|
|
|
|
static void rt2800_init_bbp_3572(struct rt2x00_dev *rt2x00dev)
|
|
{
|
|
rt2800_bbp_write(rt2x00dev, 31, 0x08);
|
|
|
|
rt2800_bbp_write(rt2x00dev, 65, 0x2c);
|
|
rt2800_bbp_write(rt2x00dev, 66, 0x38);
|
|
|
|
rt2800_bbp_write(rt2x00dev, 69, 0x12);
|
|
rt2800_bbp_write(rt2x00dev, 73, 0x10);
|
|
|
|
rt2800_bbp_write(rt2x00dev, 70, 0x0a);
|
|
|
|
rt2800_bbp_write(rt2x00dev, 79, 0x13);
|
|
rt2800_bbp_write(rt2x00dev, 80, 0x05);
|
|
rt2800_bbp_write(rt2x00dev, 81, 0x33);
|
|
|
|
rt2800_bbp_write(rt2x00dev, 82, 0x62);
|
|
|
|
rt2800_bbp_write(rt2x00dev, 83, 0x6a);
|
|
|
|
rt2800_bbp_write(rt2x00dev, 84, 0x99);
|
|
|
|
rt2800_bbp_write(rt2x00dev, 86, 0x00);
|
|
|
|
rt2800_bbp_write(rt2x00dev, 91, 0x04);
|
|
|
|
rt2800_bbp_write(rt2x00dev, 92, 0x00);
|
|
|
|
rt2800_bbp_write(rt2x00dev, 103, 0xc0);
|
|
|
|
rt2800_bbp_write(rt2x00dev, 105, 0x05);
|
|
|
|
rt2800_bbp_write(rt2x00dev, 106, 0x35);
|
|
|
|
rt2800_disable_unused_dac_adc(rt2x00dev);
|
|
}
|
|
|
|
static void rt2800_init_bbp_3593(struct rt2x00_dev *rt2x00dev)
|
|
{
|
|
rt2800_init_bbp_early(rt2x00dev);
|
|
|
|
rt2800_bbp_write(rt2x00dev, 79, 0x13);
|
|
rt2800_bbp_write(rt2x00dev, 80, 0x05);
|
|
rt2800_bbp_write(rt2x00dev, 81, 0x33);
|
|
rt2800_bbp_write(rt2x00dev, 137, 0x0f);
|
|
|
|
rt2800_bbp_write(rt2x00dev, 84, 0x19);
|
|
|
|
/* Enable DC filter */
|
|
if (rt2x00_rt_rev_gte(rt2x00dev, RT3593, REV_RT3593E))
|
|
rt2800_bbp_write(rt2x00dev, 103, 0xc0);
|
|
}
|
|
|
|
static void rt2800_init_bbp_3883(struct rt2x00_dev *rt2x00dev)
|
|
{
|
|
rt2800_init_bbp_early(rt2x00dev);
|
|
|
|
rt2800_bbp_write(rt2x00dev, 4, 0x50);
|
|
rt2800_bbp_write(rt2x00dev, 47, 0x48);
|
|
|
|
rt2800_bbp_write(rt2x00dev, 86, 0x46);
|
|
rt2800_bbp_write(rt2x00dev, 88, 0x90);
|
|
|
|
rt2800_bbp_write(rt2x00dev, 92, 0x02);
|
|
|
|
rt2800_bbp_write(rt2x00dev, 103, 0xc0);
|
|
rt2800_bbp_write(rt2x00dev, 104, 0x92);
|
|
rt2800_bbp_write(rt2x00dev, 105, 0x34);
|
|
rt2800_bbp_write(rt2x00dev, 106, 0x12);
|
|
rt2800_bbp_write(rt2x00dev, 120, 0x50);
|
|
rt2800_bbp_write(rt2x00dev, 137, 0x0f);
|
|
rt2800_bbp_write(rt2x00dev, 163, 0x9d);
|
|
|
|
/* Set ITxBF timeout to 0x9C40=1000msec */
|
|
rt2800_bbp_write(rt2x00dev, 179, 0x02);
|
|
rt2800_bbp_write(rt2x00dev, 180, 0x00);
|
|
rt2800_bbp_write(rt2x00dev, 182, 0x40);
|
|
rt2800_bbp_write(rt2x00dev, 180, 0x01);
|
|
rt2800_bbp_write(rt2x00dev, 182, 0x9c);
|
|
|
|
rt2800_bbp_write(rt2x00dev, 179, 0x00);
|
|
|
|
/* Reprogram the inband interface to put right values in RXWI */
|
|
rt2800_bbp_write(rt2x00dev, 142, 0x04);
|
|
rt2800_bbp_write(rt2x00dev, 143, 0x3b);
|
|
rt2800_bbp_write(rt2x00dev, 142, 0x06);
|
|
rt2800_bbp_write(rt2x00dev, 143, 0xa0);
|
|
rt2800_bbp_write(rt2x00dev, 142, 0x07);
|
|
rt2800_bbp_write(rt2x00dev, 143, 0xa1);
|
|
rt2800_bbp_write(rt2x00dev, 142, 0x08);
|
|
rt2800_bbp_write(rt2x00dev, 143, 0xa2);
|
|
rt2800_bbp_write(rt2x00dev, 148, 0xc8);
|
|
}
|
|
|
|
static void rt2800_init_bbp_53xx(struct rt2x00_dev *rt2x00dev)
|
|
{
|
|
int ant, div_mode;
|
|
u16 eeprom;
|
|
u8 value;
|
|
|
|
rt2800_bbp4_mac_if_ctrl(rt2x00dev);
|
|
|
|
rt2800_bbp_write(rt2x00dev, 31, 0x08);
|
|
|
|
rt2800_bbp_write(rt2x00dev, 65, 0x2c);
|
|
rt2800_bbp_write(rt2x00dev, 66, 0x38);
|
|
|
|
rt2800_bbp_write(rt2x00dev, 68, 0x0b);
|
|
|
|
rt2800_bbp_write(rt2x00dev, 69, 0x12);
|
|
rt2800_bbp_write(rt2x00dev, 73, 0x13);
|
|
rt2800_bbp_write(rt2x00dev, 75, 0x46);
|
|
rt2800_bbp_write(rt2x00dev, 76, 0x28);
|
|
|
|
rt2800_bbp_write(rt2x00dev, 77, 0x59);
|
|
|
|
rt2800_bbp_write(rt2x00dev, 70, 0x0a);
|
|
|
|
rt2800_bbp_write(rt2x00dev, 79, 0x13);
|
|
rt2800_bbp_write(rt2x00dev, 80, 0x05);
|
|
rt2800_bbp_write(rt2x00dev, 81, 0x33);
|
|
|
|
rt2800_bbp_write(rt2x00dev, 82, 0x62);
|
|
|
|
rt2800_bbp_write(rt2x00dev, 83, 0x7a);
|
|
|
|
rt2800_bbp_write(rt2x00dev, 84, 0x9a);
|
|
|
|
rt2800_bbp_write(rt2x00dev, 86, 0x38);
|
|
|
|
if (rt2x00_rt(rt2x00dev, RT5392))
|
|
rt2800_bbp_write(rt2x00dev, 88, 0x90);
|
|
|
|
rt2800_bbp_write(rt2x00dev, 91, 0x04);
|
|
|
|
rt2800_bbp_write(rt2x00dev, 92, 0x02);
|
|
|
|
if (rt2x00_rt(rt2x00dev, RT5392)) {
|
|
rt2800_bbp_write(rt2x00dev, 95, 0x9a);
|
|
rt2800_bbp_write(rt2x00dev, 98, 0x12);
|
|
}
|
|
|
|
rt2800_bbp_write(rt2x00dev, 103, 0xc0);
|
|
|
|
rt2800_bbp_write(rt2x00dev, 104, 0x92);
|
|
|
|
rt2800_bbp_write(rt2x00dev, 105, 0x3c);
|
|
|
|
if (rt2x00_rt(rt2x00dev, RT5390))
|
|
rt2800_bbp_write(rt2x00dev, 106, 0x03);
|
|
else if (rt2x00_rt(rt2x00dev, RT5392))
|
|
rt2800_bbp_write(rt2x00dev, 106, 0x12);
|
|
else
|
|
WARN_ON(1);
|
|
|
|
rt2800_bbp_write(rt2x00dev, 128, 0x12);
|
|
|
|
if (rt2x00_rt(rt2x00dev, RT5392)) {
|
|
rt2800_bbp_write(rt2x00dev, 134, 0xd0);
|
|
rt2800_bbp_write(rt2x00dev, 135, 0xf6);
|
|
}
|
|
|
|
rt2800_disable_unused_dac_adc(rt2x00dev);
|
|
|
|
eeprom = rt2800_eeprom_read(rt2x00dev, EEPROM_NIC_CONF1);
|
|
div_mode = rt2x00_get_field16(eeprom,
|
|
EEPROM_NIC_CONF1_ANT_DIVERSITY);
|
|
ant = (div_mode == 3) ? 1 : 0;
|
|
|
|
/* check if this is a Bluetooth combo card */
|
|
if (rt2x00_has_cap_bt_coexist(rt2x00dev)) {
|
|
u32 reg;
|
|
|
|
reg = rt2800_register_read(rt2x00dev, GPIO_CTRL);
|
|
rt2x00_set_field32(®, GPIO_CTRL_DIR3, 0);
|
|
rt2x00_set_field32(®, GPIO_CTRL_DIR6, 0);
|
|
rt2x00_set_field32(®, GPIO_CTRL_VAL3, 0);
|
|
rt2x00_set_field32(®, GPIO_CTRL_VAL6, 0);
|
|
if (ant == 0)
|
|
rt2x00_set_field32(®, GPIO_CTRL_VAL3, 1);
|
|
else if (ant == 1)
|
|
rt2x00_set_field32(®, GPIO_CTRL_VAL6, 1);
|
|
rt2800_register_write(rt2x00dev, GPIO_CTRL, reg);
|
|
}
|
|
|
|
/* These chips have hardware RX antenna diversity */
|
|
if (rt2x00_rt_rev_gte(rt2x00dev, RT5390, REV_RT5390R) ||
|
|
rt2x00_rt_rev_gte(rt2x00dev, RT5390, REV_RT5370G)) {
|
|
rt2800_bbp_write(rt2x00dev, 150, 0); /* Disable Antenna Software OFDM */
|
|
rt2800_bbp_write(rt2x00dev, 151, 0); /* Disable Antenna Software CCK */
|
|
rt2800_bbp_write(rt2x00dev, 154, 0); /* Clear previously selected antenna */
|
|
}
|
|
|
|
value = rt2800_bbp_read(rt2x00dev, 152);
|
|
if (ant == 0)
|
|
rt2x00_set_field8(&value, BBP152_RX_DEFAULT_ANT, 1);
|
|
else
|
|
rt2x00_set_field8(&value, BBP152_RX_DEFAULT_ANT, 0);
|
|
rt2800_bbp_write(rt2x00dev, 152, value);
|
|
|
|
rt2800_init_freq_calibration(rt2x00dev);
|
|
}
|
|
|
|
static void rt2800_init_bbp_5592(struct rt2x00_dev *rt2x00dev)
|
|
{
|
|
int ant, div_mode;
|
|
u16 eeprom;
|
|
u8 value;
|
|
|
|
rt2800_init_bbp_early(rt2x00dev);
|
|
|
|
value = rt2800_bbp_read(rt2x00dev, 105);
|
|
rt2x00_set_field8(&value, BBP105_MLD,
|
|
rt2x00dev->default_ant.rx_chain_num == 2);
|
|
rt2800_bbp_write(rt2x00dev, 105, value);
|
|
|
|
rt2800_bbp4_mac_if_ctrl(rt2x00dev);
|
|
|
|
rt2800_bbp_write(rt2x00dev, 20, 0x06);
|
|
rt2800_bbp_write(rt2x00dev, 31, 0x08);
|
|
rt2800_bbp_write(rt2x00dev, 65, 0x2C);
|
|
rt2800_bbp_write(rt2x00dev, 68, 0xDD);
|
|
rt2800_bbp_write(rt2x00dev, 69, 0x1A);
|
|
rt2800_bbp_write(rt2x00dev, 70, 0x05);
|
|
rt2800_bbp_write(rt2x00dev, 73, 0x13);
|
|
rt2800_bbp_write(rt2x00dev, 74, 0x0F);
|
|
rt2800_bbp_write(rt2x00dev, 75, 0x4F);
|
|
rt2800_bbp_write(rt2x00dev, 76, 0x28);
|
|
rt2800_bbp_write(rt2x00dev, 77, 0x59);
|
|
rt2800_bbp_write(rt2x00dev, 84, 0x9A);
|
|
rt2800_bbp_write(rt2x00dev, 86, 0x38);
|
|
rt2800_bbp_write(rt2x00dev, 88, 0x90);
|
|
rt2800_bbp_write(rt2x00dev, 91, 0x04);
|
|
rt2800_bbp_write(rt2x00dev, 92, 0x02);
|
|
rt2800_bbp_write(rt2x00dev, 95, 0x9a);
|
|
rt2800_bbp_write(rt2x00dev, 98, 0x12);
|
|
rt2800_bbp_write(rt2x00dev, 103, 0xC0);
|
|
rt2800_bbp_write(rt2x00dev, 104, 0x92);
|
|
/* FIXME BBP105 owerwrite */
|
|
rt2800_bbp_write(rt2x00dev, 105, 0x3C);
|
|
rt2800_bbp_write(rt2x00dev, 106, 0x35);
|
|
rt2800_bbp_write(rt2x00dev, 128, 0x12);
|
|
rt2800_bbp_write(rt2x00dev, 134, 0xD0);
|
|
rt2800_bbp_write(rt2x00dev, 135, 0xF6);
|
|
rt2800_bbp_write(rt2x00dev, 137, 0x0F);
|
|
|
|
/* Initialize GLRT (Generalized Likehood Radio Test) */
|
|
rt2800_init_bbp_5592_glrt(rt2x00dev);
|
|
|
|
rt2800_bbp4_mac_if_ctrl(rt2x00dev);
|
|
|
|
eeprom = rt2800_eeprom_read(rt2x00dev, EEPROM_NIC_CONF1);
|
|
div_mode = rt2x00_get_field16(eeprom, EEPROM_NIC_CONF1_ANT_DIVERSITY);
|
|
ant = (div_mode == 3) ? 1 : 0;
|
|
value = rt2800_bbp_read(rt2x00dev, 152);
|
|
if (ant == 0) {
|
|
/* Main antenna */
|
|
rt2x00_set_field8(&value, BBP152_RX_DEFAULT_ANT, 1);
|
|
} else {
|
|
/* Auxiliary antenna */
|
|
rt2x00_set_field8(&value, BBP152_RX_DEFAULT_ANT, 0);
|
|
}
|
|
rt2800_bbp_write(rt2x00dev, 152, value);
|
|
|
|
if (rt2x00_rt_rev_gte(rt2x00dev, RT5592, REV_RT5592C)) {
|
|
value = rt2800_bbp_read(rt2x00dev, 254);
|
|
rt2x00_set_field8(&value, BBP254_BIT7, 1);
|
|
rt2800_bbp_write(rt2x00dev, 254, value);
|
|
}
|
|
|
|
rt2800_init_freq_calibration(rt2x00dev);
|
|
|
|
rt2800_bbp_write(rt2x00dev, 84, 0x19);
|
|
if (rt2x00_rt_rev_gte(rt2x00dev, RT5592, REV_RT5592C))
|
|
rt2800_bbp_write(rt2x00dev, 103, 0xc0);
|
|
}
|
|
|
|
static void rt2800_init_bbp_6352(struct rt2x00_dev *rt2x00dev)
|
|
{
|
|
u8 bbp;
|
|
|
|
/* Apply Maximum Likelihood Detection (MLD) for 2 stream case */
|
|
bbp = rt2800_bbp_read(rt2x00dev, 105);
|
|
rt2x00_set_field8(&bbp, BBP105_MLD,
|
|
rt2x00dev->default_ant.rx_chain_num == 2);
|
|
rt2800_bbp_write(rt2x00dev, 105, bbp);
|
|
|
|
/* Avoid data loss and CRC errors */
|
|
rt2800_bbp4_mac_if_ctrl(rt2x00dev);
|
|
|
|
/* Fix I/Q swap issue */
|
|
bbp = rt2800_bbp_read(rt2x00dev, 1);
|
|
bbp |= 0x04;
|
|
rt2800_bbp_write(rt2x00dev, 1, bbp);
|
|
|
|
/* BBP for G band */
|
|
rt2800_bbp_write(rt2x00dev, 3, 0x08);
|
|
rt2800_bbp_write(rt2x00dev, 4, 0x00); /* rt2800_bbp4_mac_if_ctrl? */
|
|
rt2800_bbp_write(rt2x00dev, 6, 0x08);
|
|
rt2800_bbp_write(rt2x00dev, 14, 0x09);
|
|
rt2800_bbp_write(rt2x00dev, 15, 0xFF);
|
|
rt2800_bbp_write(rt2x00dev, 16, 0x01);
|
|
rt2800_bbp_write(rt2x00dev, 20, 0x06);
|
|
rt2800_bbp_write(rt2x00dev, 21, 0x00);
|
|
rt2800_bbp_write(rt2x00dev, 22, 0x00);
|
|
rt2800_bbp_write(rt2x00dev, 27, 0x00);
|
|
rt2800_bbp_write(rt2x00dev, 28, 0x00);
|
|
rt2800_bbp_write(rt2x00dev, 30, 0x00);
|
|
rt2800_bbp_write(rt2x00dev, 31, 0x48);
|
|
rt2800_bbp_write(rt2x00dev, 47, 0x40);
|
|
rt2800_bbp_write(rt2x00dev, 62, 0x00);
|
|
rt2800_bbp_write(rt2x00dev, 63, 0x00);
|
|
rt2800_bbp_write(rt2x00dev, 64, 0x00);
|
|
rt2800_bbp_write(rt2x00dev, 65, 0x2C);
|
|
rt2800_bbp_write(rt2x00dev, 66, 0x1C);
|
|
rt2800_bbp_write(rt2x00dev, 67, 0x20);
|
|
rt2800_bbp_write(rt2x00dev, 68, 0xDD);
|
|
rt2800_bbp_write(rt2x00dev, 69, 0x10);
|
|
rt2800_bbp_write(rt2x00dev, 70, 0x05);
|
|
rt2800_bbp_write(rt2x00dev, 73, 0x18);
|
|
rt2800_bbp_write(rt2x00dev, 74, 0x0F);
|
|
rt2800_bbp_write(rt2x00dev, 75, 0x60);
|
|
rt2800_bbp_write(rt2x00dev, 76, 0x44);
|
|
rt2800_bbp_write(rt2x00dev, 77, 0x59);
|
|
rt2800_bbp_write(rt2x00dev, 78, 0x1E);
|
|
rt2800_bbp_write(rt2x00dev, 79, 0x1C);
|
|
rt2800_bbp_write(rt2x00dev, 80, 0x0C);
|
|
rt2800_bbp_write(rt2x00dev, 81, 0x3A);
|
|
rt2800_bbp_write(rt2x00dev, 82, 0xB6);
|
|
rt2800_bbp_write(rt2x00dev, 83, 0x9A);
|
|
rt2800_bbp_write(rt2x00dev, 84, 0x9A);
|
|
rt2800_bbp_write(rt2x00dev, 86, 0x38);
|
|
rt2800_bbp_write(rt2x00dev, 88, 0x90);
|
|
rt2800_bbp_write(rt2x00dev, 91, 0x04);
|
|
rt2800_bbp_write(rt2x00dev, 92, 0x02);
|
|
rt2800_bbp_write(rt2x00dev, 95, 0x9A);
|
|
rt2800_bbp_write(rt2x00dev, 96, 0x00);
|
|
rt2800_bbp_write(rt2x00dev, 103, 0xC0);
|
|
rt2800_bbp_write(rt2x00dev, 104, 0x92);
|
|
/* FIXME BBP105 owerwrite */
|
|
rt2800_bbp_write(rt2x00dev, 105, 0x3C);
|
|
rt2800_bbp_write(rt2x00dev, 106, 0x12);
|
|
rt2800_bbp_write(rt2x00dev, 109, 0x00);
|
|
rt2800_bbp_write(rt2x00dev, 134, 0x10);
|
|
rt2800_bbp_write(rt2x00dev, 135, 0xA6);
|
|
rt2800_bbp_write(rt2x00dev, 137, 0x04);
|
|
rt2800_bbp_write(rt2x00dev, 142, 0x30);
|
|
rt2800_bbp_write(rt2x00dev, 143, 0xF7);
|
|
rt2800_bbp_write(rt2x00dev, 160, 0xEC);
|
|
rt2800_bbp_write(rt2x00dev, 161, 0xC4);
|
|
rt2800_bbp_write(rt2x00dev, 162, 0x77);
|
|
rt2800_bbp_write(rt2x00dev, 163, 0xF9);
|
|
rt2800_bbp_write(rt2x00dev, 164, 0x00);
|
|
rt2800_bbp_write(rt2x00dev, 165, 0x00);
|
|
rt2800_bbp_write(rt2x00dev, 186, 0x00);
|
|
rt2800_bbp_write(rt2x00dev, 187, 0x00);
|
|
rt2800_bbp_write(rt2x00dev, 188, 0x00);
|
|
rt2800_bbp_write(rt2x00dev, 186, 0x00);
|
|
rt2800_bbp_write(rt2x00dev, 187, 0x01);
|
|
rt2800_bbp_write(rt2x00dev, 188, 0x00);
|
|
rt2800_bbp_write(rt2x00dev, 189, 0x00);
|
|
|
|
rt2800_bbp_write(rt2x00dev, 91, 0x06);
|
|
rt2800_bbp_write(rt2x00dev, 92, 0x04);
|
|
rt2800_bbp_write(rt2x00dev, 93, 0x54);
|
|
rt2800_bbp_write(rt2x00dev, 99, 0x50);
|
|
rt2800_bbp_write(rt2x00dev, 148, 0x84);
|
|
rt2800_bbp_write(rt2x00dev, 167, 0x80);
|
|
rt2800_bbp_write(rt2x00dev, 178, 0xFF);
|
|
rt2800_bbp_write(rt2x00dev, 106, 0x13);
|
|
|
|
/* BBP for G band GLRT function (BBP_128 ~ BBP_221) */
|
|
rt2800_bbp_glrt_write(rt2x00dev, 0, 0x00);
|
|
rt2800_bbp_glrt_write(rt2x00dev, 1, 0x14);
|
|
rt2800_bbp_glrt_write(rt2x00dev, 2, 0x20);
|
|
rt2800_bbp_glrt_write(rt2x00dev, 3, 0x0A);
|
|
rt2800_bbp_glrt_write(rt2x00dev, 10, 0x16);
|
|
rt2800_bbp_glrt_write(rt2x00dev, 11, 0x06);
|
|
rt2800_bbp_glrt_write(rt2x00dev, 12, 0x02);
|
|
rt2800_bbp_glrt_write(rt2x00dev, 13, 0x07);
|
|
rt2800_bbp_glrt_write(rt2x00dev, 14, 0x05);
|
|
rt2800_bbp_glrt_write(rt2x00dev, 15, 0x09);
|
|
rt2800_bbp_glrt_write(rt2x00dev, 16, 0x20);
|
|
rt2800_bbp_glrt_write(rt2x00dev, 17, 0x08);
|
|
rt2800_bbp_glrt_write(rt2x00dev, 18, 0x4A);
|
|
rt2800_bbp_glrt_write(rt2x00dev, 19, 0x00);
|
|
rt2800_bbp_glrt_write(rt2x00dev, 20, 0x00);
|
|
rt2800_bbp_glrt_write(rt2x00dev, 128, 0xE0);
|
|
rt2800_bbp_glrt_write(rt2x00dev, 129, 0x1F);
|
|
rt2800_bbp_glrt_write(rt2x00dev, 130, 0x4F);
|
|
rt2800_bbp_glrt_write(rt2x00dev, 131, 0x32);
|
|
rt2800_bbp_glrt_write(rt2x00dev, 132, 0x08);
|
|
rt2800_bbp_glrt_write(rt2x00dev, 133, 0x28);
|
|
rt2800_bbp_glrt_write(rt2x00dev, 134, 0x19);
|
|
rt2800_bbp_glrt_write(rt2x00dev, 135, 0x0A);
|
|
rt2800_bbp_glrt_write(rt2x00dev, 138, 0x16);
|
|
rt2800_bbp_glrt_write(rt2x00dev, 139, 0x10);
|
|
rt2800_bbp_glrt_write(rt2x00dev, 140, 0x10);
|
|
rt2800_bbp_glrt_write(rt2x00dev, 141, 0x1A);
|
|
rt2800_bbp_glrt_write(rt2x00dev, 142, 0x36);
|
|
rt2800_bbp_glrt_write(rt2x00dev, 143, 0x2C);
|
|
rt2800_bbp_glrt_write(rt2x00dev, 144, 0x26);
|
|
rt2800_bbp_glrt_write(rt2x00dev, 145, 0x24);
|
|
rt2800_bbp_glrt_write(rt2x00dev, 146, 0x42);
|
|
rt2800_bbp_glrt_write(rt2x00dev, 147, 0x40);
|
|
rt2800_bbp_glrt_write(rt2x00dev, 148, 0x30);
|
|
rt2800_bbp_glrt_write(rt2x00dev, 149, 0x29);
|
|
rt2800_bbp_glrt_write(rt2x00dev, 150, 0x4C);
|
|
rt2800_bbp_glrt_write(rt2x00dev, 151, 0x46);
|
|
rt2800_bbp_glrt_write(rt2x00dev, 152, 0x3D);
|
|
rt2800_bbp_glrt_write(rt2x00dev, 153, 0x40);
|
|
rt2800_bbp_glrt_write(rt2x00dev, 154, 0x3E);
|
|
rt2800_bbp_glrt_write(rt2x00dev, 155, 0x38);
|
|
rt2800_bbp_glrt_write(rt2x00dev, 156, 0x3D);
|
|
rt2800_bbp_glrt_write(rt2x00dev, 157, 0x2F);
|
|
rt2800_bbp_glrt_write(rt2x00dev, 158, 0x3C);
|
|
rt2800_bbp_glrt_write(rt2x00dev, 159, 0x34);
|
|
rt2800_bbp_glrt_write(rt2x00dev, 160, 0x2C);
|
|
rt2800_bbp_glrt_write(rt2x00dev, 161, 0x2F);
|
|
rt2800_bbp_glrt_write(rt2x00dev, 162, 0x3C);
|
|
rt2800_bbp_glrt_write(rt2x00dev, 163, 0x35);
|
|
rt2800_bbp_glrt_write(rt2x00dev, 164, 0x2E);
|
|
rt2800_bbp_glrt_write(rt2x00dev, 165, 0x2F);
|
|
rt2800_bbp_glrt_write(rt2x00dev, 166, 0x49);
|
|
rt2800_bbp_glrt_write(rt2x00dev, 167, 0x41);
|
|
rt2800_bbp_glrt_write(rt2x00dev, 168, 0x36);
|
|
rt2800_bbp_glrt_write(rt2x00dev, 169, 0x39);
|
|
rt2800_bbp_glrt_write(rt2x00dev, 170, 0x30);
|
|
rt2800_bbp_glrt_write(rt2x00dev, 171, 0x30);
|
|
rt2800_bbp_glrt_write(rt2x00dev, 172, 0x0E);
|
|
rt2800_bbp_glrt_write(rt2x00dev, 173, 0x0D);
|
|
rt2800_bbp_glrt_write(rt2x00dev, 174, 0x28);
|
|
rt2800_bbp_glrt_write(rt2x00dev, 175, 0x21);
|
|
rt2800_bbp_glrt_write(rt2x00dev, 176, 0x1C);
|
|
rt2800_bbp_glrt_write(rt2x00dev, 177, 0x16);
|
|
rt2800_bbp_glrt_write(rt2x00dev, 178, 0x50);
|
|
rt2800_bbp_glrt_write(rt2x00dev, 179, 0x4A);
|
|
rt2800_bbp_glrt_write(rt2x00dev, 180, 0x43);
|
|
rt2800_bbp_glrt_write(rt2x00dev, 181, 0x50);
|
|
rt2800_bbp_glrt_write(rt2x00dev, 182, 0x10);
|
|
rt2800_bbp_glrt_write(rt2x00dev, 183, 0x10);
|
|
rt2800_bbp_glrt_write(rt2x00dev, 184, 0x10);
|
|
rt2800_bbp_glrt_write(rt2x00dev, 185, 0x10);
|
|
rt2800_bbp_glrt_write(rt2x00dev, 200, 0x7D);
|
|
rt2800_bbp_glrt_write(rt2x00dev, 201, 0x14);
|
|
rt2800_bbp_glrt_write(rt2x00dev, 202, 0x32);
|
|
rt2800_bbp_glrt_write(rt2x00dev, 203, 0x2C);
|
|
rt2800_bbp_glrt_write(rt2x00dev, 204, 0x36);
|
|
rt2800_bbp_glrt_write(rt2x00dev, 205, 0x4C);
|
|
rt2800_bbp_glrt_write(rt2x00dev, 206, 0x43);
|
|
rt2800_bbp_glrt_write(rt2x00dev, 207, 0x2C);
|
|
rt2800_bbp_glrt_write(rt2x00dev, 208, 0x2E);
|
|
rt2800_bbp_glrt_write(rt2x00dev, 209, 0x36);
|
|
rt2800_bbp_glrt_write(rt2x00dev, 210, 0x30);
|
|
rt2800_bbp_glrt_write(rt2x00dev, 211, 0x6E);
|
|
|
|
/* BBP for G band DCOC function */
|
|
rt2800_bbp_dcoc_write(rt2x00dev, 140, 0x0C);
|
|
rt2800_bbp_dcoc_write(rt2x00dev, 141, 0x00);
|
|
rt2800_bbp_dcoc_write(rt2x00dev, 142, 0x10);
|
|
rt2800_bbp_dcoc_write(rt2x00dev, 143, 0x10);
|
|
rt2800_bbp_dcoc_write(rt2x00dev, 144, 0x10);
|
|
rt2800_bbp_dcoc_write(rt2x00dev, 145, 0x10);
|
|
rt2800_bbp_dcoc_write(rt2x00dev, 146, 0x08);
|
|
rt2800_bbp_dcoc_write(rt2x00dev, 147, 0x40);
|
|
rt2800_bbp_dcoc_write(rt2x00dev, 148, 0x04);
|
|
rt2800_bbp_dcoc_write(rt2x00dev, 149, 0x04);
|
|
rt2800_bbp_dcoc_write(rt2x00dev, 150, 0x08);
|
|
rt2800_bbp_dcoc_write(rt2x00dev, 151, 0x08);
|
|
rt2800_bbp_dcoc_write(rt2x00dev, 152, 0x03);
|
|
rt2800_bbp_dcoc_write(rt2x00dev, 153, 0x03);
|
|
rt2800_bbp_dcoc_write(rt2x00dev, 154, 0x03);
|
|
rt2800_bbp_dcoc_write(rt2x00dev, 155, 0x02);
|
|
rt2800_bbp_dcoc_write(rt2x00dev, 156, 0x40);
|
|
rt2800_bbp_dcoc_write(rt2x00dev, 157, 0x40);
|
|
rt2800_bbp_dcoc_write(rt2x00dev, 158, 0x64);
|
|
rt2800_bbp_dcoc_write(rt2x00dev, 159, 0x64);
|
|
|
|
rt2800_bbp4_mac_if_ctrl(rt2x00dev);
|
|
}
|
|
|
|
static void rt2800_init_bbp(struct rt2x00_dev *rt2x00dev)
|
|
{
|
|
unsigned int i;
|
|
u16 eeprom;
|
|
u8 reg_id;
|
|
u8 value;
|
|
|
|
if (rt2800_is_305x_soc(rt2x00dev))
|
|
rt2800_init_bbp_305x_soc(rt2x00dev);
|
|
|
|
switch (rt2x00dev->chip.rt) {
|
|
case RT2860:
|
|
case RT2872:
|
|
case RT2883:
|
|
rt2800_init_bbp_28xx(rt2x00dev);
|
|
break;
|
|
case RT3070:
|
|
case RT3071:
|
|
case RT3090:
|
|
rt2800_init_bbp_30xx(rt2x00dev);
|
|
break;
|
|
case RT3290:
|
|
rt2800_init_bbp_3290(rt2x00dev);
|
|
break;
|
|
case RT3352:
|
|
case RT5350:
|
|
rt2800_init_bbp_3352(rt2x00dev);
|
|
break;
|
|
case RT3390:
|
|
rt2800_init_bbp_3390(rt2x00dev);
|
|
break;
|
|
case RT3572:
|
|
rt2800_init_bbp_3572(rt2x00dev);
|
|
break;
|
|
case RT3593:
|
|
rt2800_init_bbp_3593(rt2x00dev);
|
|
return;
|
|
case RT3883:
|
|
rt2800_init_bbp_3883(rt2x00dev);
|
|
return;
|
|
case RT5390:
|
|
case RT5392:
|
|
rt2800_init_bbp_53xx(rt2x00dev);
|
|
break;
|
|
case RT5592:
|
|
rt2800_init_bbp_5592(rt2x00dev);
|
|
return;
|
|
case RT6352:
|
|
rt2800_init_bbp_6352(rt2x00dev);
|
|
break;
|
|
}
|
|
|
|
for (i = 0; i < EEPROM_BBP_SIZE; i++) {
|
|
eeprom = rt2800_eeprom_read_from_array(rt2x00dev,
|
|
EEPROM_BBP_START, i);
|
|
|
|
if (eeprom != 0xffff && eeprom != 0x0000) {
|
|
reg_id = rt2x00_get_field16(eeprom, EEPROM_BBP_REG_ID);
|
|
value = rt2x00_get_field16(eeprom, EEPROM_BBP_VALUE);
|
|
rt2800_bbp_write(rt2x00dev, reg_id, value);
|
|
}
|
|
}
|
|
}
|
|
|
|
static void rt2800_led_open_drain_enable(struct rt2x00_dev *rt2x00dev)
|
|
{
|
|
u32 reg;
|
|
|
|
reg = rt2800_register_read(rt2x00dev, OPT_14_CSR);
|
|
rt2x00_set_field32(®, OPT_14_CSR_BIT0, 1);
|
|
rt2800_register_write(rt2x00dev, OPT_14_CSR, reg);
|
|
}
|
|
|
|
static u8 rt2800_init_rx_filter(struct rt2x00_dev *rt2x00dev, bool bw40,
|
|
u8 filter_target)
|
|
{
|
|
unsigned int i;
|
|
u8 bbp;
|
|
u8 rfcsr;
|
|
u8 passband;
|
|
u8 stopband;
|
|
u8 overtuned = 0;
|
|
u8 rfcsr24 = (bw40) ? 0x27 : 0x07;
|
|
|
|
rt2800_rfcsr_write(rt2x00dev, 24, rfcsr24);
|
|
|
|
bbp = rt2800_bbp_read(rt2x00dev, 4);
|
|
rt2x00_set_field8(&bbp, BBP4_BANDWIDTH, 2 * bw40);
|
|
rt2800_bbp_write(rt2x00dev, 4, bbp);
|
|
|
|
rfcsr = rt2800_rfcsr_read(rt2x00dev, 31);
|
|
rt2x00_set_field8(&rfcsr, RFCSR31_RX_H20M, bw40);
|
|
rt2800_rfcsr_write(rt2x00dev, 31, rfcsr);
|
|
|
|
rfcsr = rt2800_rfcsr_read(rt2x00dev, 22);
|
|
rt2x00_set_field8(&rfcsr, RFCSR22_BASEBAND_LOOPBACK, 1);
|
|
rt2800_rfcsr_write(rt2x00dev, 22, rfcsr);
|
|
|
|
/*
|
|
* Set power & frequency of passband test tone
|
|
*/
|
|
rt2800_bbp_write(rt2x00dev, 24, 0);
|
|
|
|
for (i = 0; i < 100; i++) {
|
|
rt2800_bbp_write(rt2x00dev, 25, 0x90);
|
|
msleep(1);
|
|
|
|
passband = rt2800_bbp_read(rt2x00dev, 55);
|
|
if (passband)
|
|
break;
|
|
}
|
|
|
|
/*
|
|
* Set power & frequency of stopband test tone
|
|
*/
|
|
rt2800_bbp_write(rt2x00dev, 24, 0x06);
|
|
|
|
for (i = 0; i < 100; i++) {
|
|
rt2800_bbp_write(rt2x00dev, 25, 0x90);
|
|
msleep(1);
|
|
|
|
stopband = rt2800_bbp_read(rt2x00dev, 55);
|
|
|
|
if ((passband - stopband) <= filter_target) {
|
|
rfcsr24++;
|
|
overtuned += ((passband - stopband) == filter_target);
|
|
} else
|
|
break;
|
|
|
|
rt2800_rfcsr_write(rt2x00dev, 24, rfcsr24);
|
|
}
|
|
|
|
rfcsr24 -= !!overtuned;
|
|
|
|
rt2800_rfcsr_write(rt2x00dev, 24, rfcsr24);
|
|
return rfcsr24;
|
|
}
|
|
|
|
static void rt2800_rf_init_calibration(struct rt2x00_dev *rt2x00dev,
|
|
const unsigned int rf_reg)
|
|
{
|
|
u8 rfcsr;
|
|
|
|
rfcsr = rt2800_rfcsr_read(rt2x00dev, rf_reg);
|
|
rt2x00_set_field8(&rfcsr, FIELD8(0x80), 1);
|
|
rt2800_rfcsr_write(rt2x00dev, rf_reg, rfcsr);
|
|
msleep(1);
|
|
rt2x00_set_field8(&rfcsr, FIELD8(0x80), 0);
|
|
rt2800_rfcsr_write(rt2x00dev, rf_reg, rfcsr);
|
|
}
|
|
|
|
static void rt2800_rx_filter_calibration(struct rt2x00_dev *rt2x00dev)
|
|
{
|
|
struct rt2800_drv_data *drv_data = rt2x00dev->drv_data;
|
|
u8 filter_tgt_bw20;
|
|
u8 filter_tgt_bw40;
|
|
u8 rfcsr, bbp;
|
|
|
|
/*
|
|
* TODO: sync filter_tgt values with vendor driver
|
|
*/
|
|
if (rt2x00_rt(rt2x00dev, RT3070)) {
|
|
filter_tgt_bw20 = 0x16;
|
|
filter_tgt_bw40 = 0x19;
|
|
} else {
|
|
filter_tgt_bw20 = 0x13;
|
|
filter_tgt_bw40 = 0x15;
|
|
}
|
|
|
|
drv_data->calibration_bw20 =
|
|
rt2800_init_rx_filter(rt2x00dev, false, filter_tgt_bw20);
|
|
drv_data->calibration_bw40 =
|
|
rt2800_init_rx_filter(rt2x00dev, true, filter_tgt_bw40);
|
|
|
|
/*
|
|
* Save BBP 25 & 26 values for later use in channel switching (for 3052)
|
|
*/
|
|
drv_data->bbp25 = rt2800_bbp_read(rt2x00dev, 25);
|
|
drv_data->bbp26 = rt2800_bbp_read(rt2x00dev, 26);
|
|
|
|
/*
|
|
* Set back to initial state
|
|
*/
|
|
rt2800_bbp_write(rt2x00dev, 24, 0);
|
|
|
|
rfcsr = rt2800_rfcsr_read(rt2x00dev, 22);
|
|
rt2x00_set_field8(&rfcsr, RFCSR22_BASEBAND_LOOPBACK, 0);
|
|
rt2800_rfcsr_write(rt2x00dev, 22, rfcsr);
|
|
|
|
/*
|
|
* Set BBP back to BW20
|
|
*/
|
|
bbp = rt2800_bbp_read(rt2x00dev, 4);
|
|
rt2x00_set_field8(&bbp, BBP4_BANDWIDTH, 0);
|
|
rt2800_bbp_write(rt2x00dev, 4, bbp);
|
|
}
|
|
|
|
static void rt2800_normal_mode_setup_3xxx(struct rt2x00_dev *rt2x00dev)
|
|
{
|
|
struct rt2800_drv_data *drv_data = rt2x00dev->drv_data;
|
|
u8 min_gain, rfcsr, bbp;
|
|
u16 eeprom;
|
|
|
|
rfcsr = rt2800_rfcsr_read(rt2x00dev, 17);
|
|
|
|
rt2x00_set_field8(&rfcsr, RFCSR17_TX_LO1_EN, 0);
|
|
if (rt2x00_rt(rt2x00dev, RT3070) ||
|
|
rt2x00_rt_rev_lt(rt2x00dev, RT3071, REV_RT3071E) ||
|
|
rt2x00_rt_rev_lt(rt2x00dev, RT3090, REV_RT3090E) ||
|
|
rt2x00_rt_rev_lt(rt2x00dev, RT3390, REV_RT3390E)) {
|
|
if (!rt2x00_has_cap_external_lna_bg(rt2x00dev))
|
|
rt2x00_set_field8(&rfcsr, RFCSR17_R, 1);
|
|
}
|
|
|
|
min_gain = rt2x00_rt(rt2x00dev, RT3070) ? 1 : 2;
|
|
if (drv_data->txmixer_gain_24g >= min_gain) {
|
|
rt2x00_set_field8(&rfcsr, RFCSR17_TXMIXER_GAIN,
|
|
drv_data->txmixer_gain_24g);
|
|
}
|
|
|
|
rt2800_rfcsr_write(rt2x00dev, 17, rfcsr);
|
|
|
|
if (rt2x00_rt(rt2x00dev, RT3090)) {
|
|
/* Turn off unused DAC1 and ADC1 to reduce power consumption */
|
|
bbp = rt2800_bbp_read(rt2x00dev, 138);
|
|
eeprom = rt2800_eeprom_read(rt2x00dev, EEPROM_NIC_CONF0);
|
|
if (rt2x00_get_field16(eeprom, EEPROM_NIC_CONF0_RXPATH) == 1)
|
|
rt2x00_set_field8(&bbp, BBP138_RX_ADC1, 0);
|
|
if (rt2x00_get_field16(eeprom, EEPROM_NIC_CONF0_TXPATH) == 1)
|
|
rt2x00_set_field8(&bbp, BBP138_TX_DAC1, 1);
|
|
rt2800_bbp_write(rt2x00dev, 138, bbp);
|
|
}
|
|
|
|
if (rt2x00_rt(rt2x00dev, RT3070)) {
|
|
rfcsr = rt2800_rfcsr_read(rt2x00dev, 27);
|
|
if (rt2x00_rt_rev_lt(rt2x00dev, RT3070, REV_RT3070F))
|
|
rt2x00_set_field8(&rfcsr, RFCSR27_R1, 3);
|
|
else
|
|
rt2x00_set_field8(&rfcsr, RFCSR27_R1, 0);
|
|
rt2x00_set_field8(&rfcsr, RFCSR27_R2, 0);
|
|
rt2x00_set_field8(&rfcsr, RFCSR27_R3, 0);
|
|
rt2x00_set_field8(&rfcsr, RFCSR27_R4, 0);
|
|
rt2800_rfcsr_write(rt2x00dev, 27, rfcsr);
|
|
} else if (rt2x00_rt(rt2x00dev, RT3071) ||
|
|
rt2x00_rt(rt2x00dev, RT3090) ||
|
|
rt2x00_rt(rt2x00dev, RT3390)) {
|
|
rfcsr = rt2800_rfcsr_read(rt2x00dev, 1);
|
|
rt2x00_set_field8(&rfcsr, RFCSR1_RF_BLOCK_EN, 1);
|
|
rt2x00_set_field8(&rfcsr, RFCSR1_RX0_PD, 0);
|
|
rt2x00_set_field8(&rfcsr, RFCSR1_TX0_PD, 0);
|
|
rt2x00_set_field8(&rfcsr, RFCSR1_RX1_PD, 1);
|
|
rt2x00_set_field8(&rfcsr, RFCSR1_TX1_PD, 1);
|
|
rt2800_rfcsr_write(rt2x00dev, 1, rfcsr);
|
|
|
|
rfcsr = rt2800_rfcsr_read(rt2x00dev, 15);
|
|
rt2x00_set_field8(&rfcsr, RFCSR15_TX_LO2_EN, 0);
|
|
rt2800_rfcsr_write(rt2x00dev, 15, rfcsr);
|
|
|
|
rfcsr = rt2800_rfcsr_read(rt2x00dev, 20);
|
|
rt2x00_set_field8(&rfcsr, RFCSR20_RX_LO1_EN, 0);
|
|
rt2800_rfcsr_write(rt2x00dev, 20, rfcsr);
|
|
|
|
rfcsr = rt2800_rfcsr_read(rt2x00dev, 21);
|
|
rt2x00_set_field8(&rfcsr, RFCSR21_RX_LO2_EN, 0);
|
|
rt2800_rfcsr_write(rt2x00dev, 21, rfcsr);
|
|
}
|
|
}
|
|
|
|
static void rt2800_normal_mode_setup_3593(struct rt2x00_dev *rt2x00dev)
|
|
{
|
|
struct rt2800_drv_data *drv_data = rt2x00dev->drv_data;
|
|
u8 rfcsr;
|
|
u8 tx_gain;
|
|
|
|
rfcsr = rt2800_rfcsr_read(rt2x00dev, 50);
|
|
rt2x00_set_field8(&rfcsr, RFCSR50_TX_LO2_EN, 0);
|
|
rt2800_rfcsr_write(rt2x00dev, 50, rfcsr);
|
|
|
|
rfcsr = rt2800_rfcsr_read(rt2x00dev, 51);
|
|
tx_gain = rt2x00_get_field8(drv_data->txmixer_gain_24g,
|
|
RFCSR17_TXMIXER_GAIN);
|
|
rt2x00_set_field8(&rfcsr, RFCSR51_BITS24, tx_gain);
|
|
rt2800_rfcsr_write(rt2x00dev, 51, rfcsr);
|
|
|
|
rfcsr = rt2800_rfcsr_read(rt2x00dev, 38);
|
|
rt2x00_set_field8(&rfcsr, RFCSR38_RX_LO1_EN, 0);
|
|
rt2800_rfcsr_write(rt2x00dev, 38, rfcsr);
|
|
|
|
rfcsr = rt2800_rfcsr_read(rt2x00dev, 39);
|
|
rt2x00_set_field8(&rfcsr, RFCSR39_RX_LO2_EN, 0);
|
|
rt2800_rfcsr_write(rt2x00dev, 39, rfcsr);
|
|
|
|
rfcsr = rt2800_rfcsr_read(rt2x00dev, 1);
|
|
rt2x00_set_field8(&rfcsr, RFCSR1_RF_BLOCK_EN, 1);
|
|
rt2x00_set_field8(&rfcsr, RFCSR1_PLL_PD, 1);
|
|
rt2800_rfcsr_write(rt2x00dev, 1, rfcsr);
|
|
|
|
rfcsr = rt2800_rfcsr_read(rt2x00dev, 30);
|
|
rt2x00_set_field8(&rfcsr, RFCSR30_RX_VCM, 2);
|
|
rt2800_rfcsr_write(rt2x00dev, 30, rfcsr);
|
|
|
|
/* TODO: enable stream mode */
|
|
}
|
|
|
|
static void rt2800_normal_mode_setup_5xxx(struct rt2x00_dev *rt2x00dev)
|
|
{
|
|
u8 reg;
|
|
u16 eeprom;
|
|
|
|
/* Turn off unused DAC1 and ADC1 to reduce power consumption */
|
|
reg = rt2800_bbp_read(rt2x00dev, 138);
|
|
eeprom = rt2800_eeprom_read(rt2x00dev, EEPROM_NIC_CONF0);
|
|
if (rt2x00_get_field16(eeprom, EEPROM_NIC_CONF0_RXPATH) == 1)
|
|
rt2x00_set_field8(®, BBP138_RX_ADC1, 0);
|
|
if (rt2x00_get_field16(eeprom, EEPROM_NIC_CONF0_TXPATH) == 1)
|
|
rt2x00_set_field8(®, BBP138_TX_DAC1, 1);
|
|
rt2800_bbp_write(rt2x00dev, 138, reg);
|
|
|
|
reg = rt2800_rfcsr_read(rt2x00dev, 38);
|
|
rt2x00_set_field8(®, RFCSR38_RX_LO1_EN, 0);
|
|
rt2800_rfcsr_write(rt2x00dev, 38, reg);
|
|
|
|
reg = rt2800_rfcsr_read(rt2x00dev, 39);
|
|
rt2x00_set_field8(®, RFCSR39_RX_LO2_EN, 0);
|
|
rt2800_rfcsr_write(rt2x00dev, 39, reg);
|
|
|
|
rt2800_bbp4_mac_if_ctrl(rt2x00dev);
|
|
|
|
reg = rt2800_rfcsr_read(rt2x00dev, 30);
|
|
rt2x00_set_field8(®, RFCSR30_RX_VCM, 2);
|
|
rt2800_rfcsr_write(rt2x00dev, 30, reg);
|
|
}
|
|
|
|
static void rt2800_init_rfcsr_305x_soc(struct rt2x00_dev *rt2x00dev)
|
|
{
|
|
rt2800_rf_init_calibration(rt2x00dev, 30);
|
|
|
|
rt2800_rfcsr_write(rt2x00dev, 0, 0x50);
|
|
rt2800_rfcsr_write(rt2x00dev, 1, 0x01);
|
|
rt2800_rfcsr_write(rt2x00dev, 2, 0xf7);
|
|
rt2800_rfcsr_write(rt2x00dev, 3, 0x75);
|
|
rt2800_rfcsr_write(rt2x00dev, 4, 0x40);
|
|
rt2800_rfcsr_write(rt2x00dev, 5, 0x03);
|
|
rt2800_rfcsr_write(rt2x00dev, 6, 0x02);
|
|
rt2800_rfcsr_write(rt2x00dev, 7, 0x50);
|
|
rt2800_rfcsr_write(rt2x00dev, 8, 0x39);
|
|
rt2800_rfcsr_write(rt2x00dev, 9, 0x0f);
|
|
rt2800_rfcsr_write(rt2x00dev, 10, 0x60);
|
|
rt2800_rfcsr_write(rt2x00dev, 11, 0x21);
|
|
rt2800_rfcsr_write(rt2x00dev, 12, 0x75);
|
|
rt2800_rfcsr_write(rt2x00dev, 13, 0x75);
|
|
rt2800_rfcsr_write(rt2x00dev, 14, 0x90);
|
|
rt2800_rfcsr_write(rt2x00dev, 15, 0x58);
|
|
rt2800_rfcsr_write(rt2x00dev, 16, 0xb3);
|
|
rt2800_rfcsr_write(rt2x00dev, 17, 0x92);
|
|
rt2800_rfcsr_write(rt2x00dev, 18, 0x2c);
|
|
rt2800_rfcsr_write(rt2x00dev, 19, 0x02);
|
|
rt2800_rfcsr_write(rt2x00dev, 20, 0xba);
|
|
rt2800_rfcsr_write(rt2x00dev, 21, 0xdb);
|
|
rt2800_rfcsr_write(rt2x00dev, 22, 0x00);
|
|
rt2800_rfcsr_write(rt2x00dev, 23, 0x31);
|
|
rt2800_rfcsr_write(rt2x00dev, 24, 0x08);
|
|
rt2800_rfcsr_write(rt2x00dev, 25, 0x01);
|
|
rt2800_rfcsr_write(rt2x00dev, 26, 0x25);
|
|
rt2800_rfcsr_write(rt2x00dev, 27, 0x23);
|
|
rt2800_rfcsr_write(rt2x00dev, 28, 0x13);
|
|
rt2800_rfcsr_write(rt2x00dev, 29, 0x83);
|
|
rt2800_rfcsr_write(rt2x00dev, 30, 0x00);
|
|
rt2800_rfcsr_write(rt2x00dev, 31, 0x00);
|
|
}
|
|
|
|
static void rt2800_init_rfcsr_30xx(struct rt2x00_dev *rt2x00dev)
|
|
{
|
|
u8 rfcsr;
|
|
u16 eeprom;
|
|
u32 reg;
|
|
|
|
/* XXX vendor driver do this only for 3070 */
|
|
rt2800_rf_init_calibration(rt2x00dev, 30);
|
|
|
|
rt2800_rfcsr_write(rt2x00dev, 4, 0x40);
|
|
rt2800_rfcsr_write(rt2x00dev, 5, 0x03);
|
|
rt2800_rfcsr_write(rt2x00dev, 6, 0x02);
|
|
rt2800_rfcsr_write(rt2x00dev, 7, 0x60);
|
|
rt2800_rfcsr_write(rt2x00dev, 9, 0x0f);
|
|
rt2800_rfcsr_write(rt2x00dev, 10, 0x41);
|
|
rt2800_rfcsr_write(rt2x00dev, 11, 0x21);
|
|
rt2800_rfcsr_write(rt2x00dev, 12, 0x7b);
|
|
rt2800_rfcsr_write(rt2x00dev, 14, 0x90);
|
|
rt2800_rfcsr_write(rt2x00dev, 15, 0x58);
|
|
rt2800_rfcsr_write(rt2x00dev, 16, 0xb3);
|
|
rt2800_rfcsr_write(rt2x00dev, 17, 0x92);
|
|
rt2800_rfcsr_write(rt2x00dev, 18, 0x2c);
|
|
rt2800_rfcsr_write(rt2x00dev, 19, 0x02);
|
|
rt2800_rfcsr_write(rt2x00dev, 20, 0xba);
|
|
rt2800_rfcsr_write(rt2x00dev, 21, 0xdb);
|
|
rt2800_rfcsr_write(rt2x00dev, 24, 0x16);
|
|
rt2800_rfcsr_write(rt2x00dev, 25, 0x03);
|
|
rt2800_rfcsr_write(rt2x00dev, 29, 0x1f);
|
|
|
|
if (rt2x00_rt_rev_lt(rt2x00dev, RT3070, REV_RT3070F)) {
|
|
reg = rt2800_register_read(rt2x00dev, LDO_CFG0);
|
|
rt2x00_set_field32(®, LDO_CFG0_BGSEL, 1);
|
|
rt2x00_set_field32(®, LDO_CFG0_LDO_CORE_VLEVEL, 3);
|
|
rt2800_register_write(rt2x00dev, LDO_CFG0, reg);
|
|
} else if (rt2x00_rt(rt2x00dev, RT3071) ||
|
|
rt2x00_rt(rt2x00dev, RT3090)) {
|
|
rt2800_rfcsr_write(rt2x00dev, 31, 0x14);
|
|
|
|
rfcsr = rt2800_rfcsr_read(rt2x00dev, 6);
|
|
rt2x00_set_field8(&rfcsr, RFCSR6_R2, 1);
|
|
rt2800_rfcsr_write(rt2x00dev, 6, rfcsr);
|
|
|
|
reg = rt2800_register_read(rt2x00dev, LDO_CFG0);
|
|
rt2x00_set_field32(®, LDO_CFG0_BGSEL, 1);
|
|
if (rt2x00_rt_rev_lt(rt2x00dev, RT3071, REV_RT3071E) ||
|
|
rt2x00_rt_rev_lt(rt2x00dev, RT3090, REV_RT3090E)) {
|
|
eeprom = rt2800_eeprom_read(rt2x00dev, EEPROM_NIC_CONF1);
|
|
if (rt2x00_get_field16(eeprom, EEPROM_NIC_CONF1_DAC_TEST))
|
|
rt2x00_set_field32(®, LDO_CFG0_LDO_CORE_VLEVEL, 3);
|
|
else
|
|
rt2x00_set_field32(®, LDO_CFG0_LDO_CORE_VLEVEL, 0);
|
|
}
|
|
rt2800_register_write(rt2x00dev, LDO_CFG0, reg);
|
|
|
|
reg = rt2800_register_read(rt2x00dev, GPIO_SWITCH);
|
|
rt2x00_set_field32(®, GPIO_SWITCH_5, 0);
|
|
rt2800_register_write(rt2x00dev, GPIO_SWITCH, reg);
|
|
}
|
|
|
|
rt2800_rx_filter_calibration(rt2x00dev);
|
|
|
|
if (rt2x00_rt_rev_lt(rt2x00dev, RT3070, REV_RT3070F) ||
|
|
rt2x00_rt_rev_lt(rt2x00dev, RT3071, REV_RT3071E) ||
|
|
rt2x00_rt_rev_lt(rt2x00dev, RT3090, REV_RT3090E))
|
|
rt2800_rfcsr_write(rt2x00dev, 27, 0x03);
|
|
|
|
rt2800_led_open_drain_enable(rt2x00dev);
|
|
rt2800_normal_mode_setup_3xxx(rt2x00dev);
|
|
}
|
|
|
|
static void rt2800_init_rfcsr_3290(struct rt2x00_dev *rt2x00dev)
|
|
{
|
|
u8 rfcsr;
|
|
|
|
rt2800_rf_init_calibration(rt2x00dev, 2);
|
|
|
|
rt2800_rfcsr_write(rt2x00dev, 1, 0x0f);
|
|
rt2800_rfcsr_write(rt2x00dev, 2, 0x80);
|
|
rt2800_rfcsr_write(rt2x00dev, 3, 0x08);
|
|
rt2800_rfcsr_write(rt2x00dev, 4, 0x00);
|
|
rt2800_rfcsr_write(rt2x00dev, 6, 0xa0);
|
|
rt2800_rfcsr_write(rt2x00dev, 8, 0xf3);
|
|
rt2800_rfcsr_write(rt2x00dev, 9, 0x02);
|
|
rt2800_rfcsr_write(rt2x00dev, 10, 0x53);
|
|
rt2800_rfcsr_write(rt2x00dev, 11, 0x4a);
|
|
rt2800_rfcsr_write(rt2x00dev, 12, 0x46);
|
|
rt2800_rfcsr_write(rt2x00dev, 13, 0x9f);
|
|
rt2800_rfcsr_write(rt2x00dev, 18, 0x02);
|
|
rt2800_rfcsr_write(rt2x00dev, 22, 0x20);
|
|
rt2800_rfcsr_write(rt2x00dev, 25, 0x83);
|
|
rt2800_rfcsr_write(rt2x00dev, 26, 0x82);
|
|
rt2800_rfcsr_write(rt2x00dev, 27, 0x09);
|
|
rt2800_rfcsr_write(rt2x00dev, 29, 0x10);
|
|
rt2800_rfcsr_write(rt2x00dev, 30, 0x10);
|
|
rt2800_rfcsr_write(rt2x00dev, 31, 0x80);
|
|
rt2800_rfcsr_write(rt2x00dev, 32, 0x80);
|
|
rt2800_rfcsr_write(rt2x00dev, 33, 0x00);
|
|
rt2800_rfcsr_write(rt2x00dev, 34, 0x05);
|
|
rt2800_rfcsr_write(rt2x00dev, 35, 0x12);
|
|
rt2800_rfcsr_write(rt2x00dev, 36, 0x00);
|
|
rt2800_rfcsr_write(rt2x00dev, 38, 0x85);
|
|
rt2800_rfcsr_write(rt2x00dev, 39, 0x1b);
|
|
rt2800_rfcsr_write(rt2x00dev, 40, 0x0b);
|
|
rt2800_rfcsr_write(rt2x00dev, 41, 0xbb);
|
|
rt2800_rfcsr_write(rt2x00dev, 42, 0xd5);
|
|
rt2800_rfcsr_write(rt2x00dev, 43, 0x7b);
|
|
rt2800_rfcsr_write(rt2x00dev, 44, 0x0e);
|
|
rt2800_rfcsr_write(rt2x00dev, 45, 0xa2);
|
|
rt2800_rfcsr_write(rt2x00dev, 46, 0x73);
|
|
rt2800_rfcsr_write(rt2x00dev, 47, 0x00);
|
|
rt2800_rfcsr_write(rt2x00dev, 48, 0x10);
|
|
rt2800_rfcsr_write(rt2x00dev, 49, 0x98);
|
|
rt2800_rfcsr_write(rt2x00dev, 52, 0x38);
|
|
rt2800_rfcsr_write(rt2x00dev, 53, 0x00);
|
|
rt2800_rfcsr_write(rt2x00dev, 54, 0x78);
|
|
rt2800_rfcsr_write(rt2x00dev, 55, 0x43);
|
|
rt2800_rfcsr_write(rt2x00dev, 56, 0x02);
|
|
rt2800_rfcsr_write(rt2x00dev, 57, 0x80);
|
|
rt2800_rfcsr_write(rt2x00dev, 58, 0x7f);
|
|
rt2800_rfcsr_write(rt2x00dev, 59, 0x09);
|
|
rt2800_rfcsr_write(rt2x00dev, 60, 0x45);
|
|
rt2800_rfcsr_write(rt2x00dev, 61, 0xc1);
|
|
|
|
rfcsr = rt2800_rfcsr_read(rt2x00dev, 29);
|
|
rt2x00_set_field8(&rfcsr, RFCSR29_RSSI_GAIN, 3);
|
|
rt2800_rfcsr_write(rt2x00dev, 29, rfcsr);
|
|
|
|
rt2800_led_open_drain_enable(rt2x00dev);
|
|
rt2800_normal_mode_setup_3xxx(rt2x00dev);
|
|
}
|
|
|
|
static void rt2800_init_rfcsr_3352(struct rt2x00_dev *rt2x00dev)
|
|
{
|
|
int tx0_ext_pa = test_bit(CAPABILITY_EXTERNAL_PA_TX0,
|
|
&rt2x00dev->cap_flags);
|
|
int tx1_ext_pa = test_bit(CAPABILITY_EXTERNAL_PA_TX1,
|
|
&rt2x00dev->cap_flags);
|
|
u8 rfcsr;
|
|
|
|
rt2800_rf_init_calibration(rt2x00dev, 30);
|
|
|
|
rt2800_rfcsr_write(rt2x00dev, 0, 0xf0);
|
|
rt2800_rfcsr_write(rt2x00dev, 1, 0x23);
|
|
rt2800_rfcsr_write(rt2x00dev, 2, 0x50);
|
|
rt2800_rfcsr_write(rt2x00dev, 3, 0x18);
|
|
rt2800_rfcsr_write(rt2x00dev, 4, 0x00);
|
|
rt2800_rfcsr_write(rt2x00dev, 5, 0x00);
|
|
rt2800_rfcsr_write(rt2x00dev, 6, 0x33);
|
|
rt2800_rfcsr_write(rt2x00dev, 7, 0x00);
|
|
rt2800_rfcsr_write(rt2x00dev, 8, 0xf1);
|
|
rt2800_rfcsr_write(rt2x00dev, 9, 0x02);
|
|
rt2800_rfcsr_write(rt2x00dev, 10, 0xd2);
|
|
rt2800_rfcsr_write(rt2x00dev, 11, 0x42);
|
|
rt2800_rfcsr_write(rt2x00dev, 12, 0x1c);
|
|
rt2800_rfcsr_write(rt2x00dev, 13, 0x00);
|
|
rt2800_rfcsr_write(rt2x00dev, 14, 0x5a);
|
|
rt2800_rfcsr_write(rt2x00dev, 15, 0x00);
|
|
rt2800_rfcsr_write(rt2x00dev, 16, 0x01);
|
|
rt2800_rfcsr_write(rt2x00dev, 18, 0x45);
|
|
rt2800_rfcsr_write(rt2x00dev, 19, 0x02);
|
|
rt2800_rfcsr_write(rt2x00dev, 20, 0x00);
|
|
rt2800_rfcsr_write(rt2x00dev, 21, 0x00);
|
|
rt2800_rfcsr_write(rt2x00dev, 22, 0x00);
|
|
rt2800_rfcsr_write(rt2x00dev, 23, 0x00);
|
|
rt2800_rfcsr_write(rt2x00dev, 24, 0x00);
|
|
rt2800_rfcsr_write(rt2x00dev, 25, 0x80);
|
|
rt2800_rfcsr_write(rt2x00dev, 26, 0x00);
|
|
rt2800_rfcsr_write(rt2x00dev, 27, 0x03);
|
|
rt2800_rfcsr_write(rt2x00dev, 28, 0x03);
|
|
rt2800_rfcsr_write(rt2x00dev, 29, 0x00);
|
|
rt2800_rfcsr_write(rt2x00dev, 30, 0x10);
|
|
rt2800_rfcsr_write(rt2x00dev, 31, 0x80);
|
|
rt2800_rfcsr_write(rt2x00dev, 32, 0x80);
|
|
rt2800_rfcsr_write(rt2x00dev, 33, 0x00);
|
|
rfcsr = 0x01;
|
|
if (tx0_ext_pa)
|
|
rt2x00_set_field8(&rfcsr, RFCSR34_TX0_EXT_PA, 1);
|
|
if (tx1_ext_pa)
|
|
rt2x00_set_field8(&rfcsr, RFCSR34_TX1_EXT_PA, 1);
|
|
rt2800_rfcsr_write(rt2x00dev, 34, rfcsr);
|
|
rt2800_rfcsr_write(rt2x00dev, 35, 0x03);
|
|
rt2800_rfcsr_write(rt2x00dev, 36, 0xbd);
|
|
rt2800_rfcsr_write(rt2x00dev, 37, 0x3c);
|
|
rt2800_rfcsr_write(rt2x00dev, 38, 0x5f);
|
|
rt2800_rfcsr_write(rt2x00dev, 39, 0xc5);
|
|
rt2800_rfcsr_write(rt2x00dev, 40, 0x33);
|
|
rfcsr = 0x52;
|
|
if (!tx0_ext_pa) {
|
|
rt2x00_set_field8(&rfcsr, RFCSR41_BIT1, 1);
|
|
rt2x00_set_field8(&rfcsr, RFCSR41_BIT4, 1);
|
|
}
|
|
rt2800_rfcsr_write(rt2x00dev, 41, rfcsr);
|
|
rfcsr = 0x52;
|
|
if (!tx1_ext_pa) {
|
|
rt2x00_set_field8(&rfcsr, RFCSR42_BIT1, 1);
|
|
rt2x00_set_field8(&rfcsr, RFCSR42_BIT4, 1);
|
|
}
|
|
rt2800_rfcsr_write(rt2x00dev, 42, rfcsr);
|
|
rt2800_rfcsr_write(rt2x00dev, 43, 0xdb);
|
|
rt2800_rfcsr_write(rt2x00dev, 44, 0xdb);
|
|
rt2800_rfcsr_write(rt2x00dev, 45, 0xdb);
|
|
rt2800_rfcsr_write(rt2x00dev, 46, 0xdd);
|
|
rt2800_rfcsr_write(rt2x00dev, 47, 0x0d);
|
|
rt2800_rfcsr_write(rt2x00dev, 48, 0x14);
|
|
rt2800_rfcsr_write(rt2x00dev, 49, 0x00);
|
|
rfcsr = 0x2d;
|
|
if (tx0_ext_pa)
|
|
rt2x00_set_field8(&rfcsr, RFCSR50_TX0_EXT_PA, 1);
|
|
if (tx1_ext_pa)
|
|
rt2x00_set_field8(&rfcsr, RFCSR50_TX1_EXT_PA, 1);
|
|
rt2800_rfcsr_write(rt2x00dev, 50, rfcsr);
|
|
rt2800_rfcsr_write(rt2x00dev, 51, (tx0_ext_pa ? 0x52 : 0x7f));
|
|
rt2800_rfcsr_write(rt2x00dev, 52, (tx0_ext_pa ? 0xc0 : 0x00));
|
|
rt2800_rfcsr_write(rt2x00dev, 53, (tx0_ext_pa ? 0xd2 : 0x52));
|
|
rt2800_rfcsr_write(rt2x00dev, 54, (tx0_ext_pa ? 0xc0 : 0x1b));
|
|
rt2800_rfcsr_write(rt2x00dev, 55, (tx1_ext_pa ? 0x52 : 0x7f));
|
|
rt2800_rfcsr_write(rt2x00dev, 56, (tx1_ext_pa ? 0xc0 : 0x00));
|
|
rt2800_rfcsr_write(rt2x00dev, 57, (tx0_ext_pa ? 0x49 : 0x52));
|
|
rt2800_rfcsr_write(rt2x00dev, 58, (tx1_ext_pa ? 0xc0 : 0x1b));
|
|
rt2800_rfcsr_write(rt2x00dev, 59, 0x00);
|
|
rt2800_rfcsr_write(rt2x00dev, 60, 0x00);
|
|
rt2800_rfcsr_write(rt2x00dev, 61, 0x00);
|
|
rt2800_rfcsr_write(rt2x00dev, 62, 0x00);
|
|
rt2800_rfcsr_write(rt2x00dev, 63, 0x00);
|
|
|
|
rt2800_rx_filter_calibration(rt2x00dev);
|
|
rt2800_led_open_drain_enable(rt2x00dev);
|
|
rt2800_normal_mode_setup_3xxx(rt2x00dev);
|
|
}
|
|
|
|
static void rt2800_init_rfcsr_3390(struct rt2x00_dev *rt2x00dev)
|
|
{
|
|
u32 reg;
|
|
|
|
rt2800_rf_init_calibration(rt2x00dev, 30);
|
|
|
|
rt2800_rfcsr_write(rt2x00dev, 0, 0xa0);
|
|
rt2800_rfcsr_write(rt2x00dev, 1, 0xe1);
|
|
rt2800_rfcsr_write(rt2x00dev, 2, 0xf1);
|
|
rt2800_rfcsr_write(rt2x00dev, 3, 0x62);
|
|
rt2800_rfcsr_write(rt2x00dev, 4, 0x40);
|
|
rt2800_rfcsr_write(rt2x00dev, 5, 0x8b);
|
|
rt2800_rfcsr_write(rt2x00dev, 6, 0x42);
|
|
rt2800_rfcsr_write(rt2x00dev, 7, 0x34);
|
|
rt2800_rfcsr_write(rt2x00dev, 8, 0x00);
|
|
rt2800_rfcsr_write(rt2x00dev, 9, 0xc0);
|
|
rt2800_rfcsr_write(rt2x00dev, 10, 0x61);
|
|
rt2800_rfcsr_write(rt2x00dev, 11, 0x21);
|
|
rt2800_rfcsr_write(rt2x00dev, 12, 0x3b);
|
|
rt2800_rfcsr_write(rt2x00dev, 13, 0xe0);
|
|
rt2800_rfcsr_write(rt2x00dev, 14, 0x90);
|
|
rt2800_rfcsr_write(rt2x00dev, 15, 0x53);
|
|
rt2800_rfcsr_write(rt2x00dev, 16, 0xe0);
|
|
rt2800_rfcsr_write(rt2x00dev, 17, 0x94);
|
|
rt2800_rfcsr_write(rt2x00dev, 18, 0x5c);
|
|
rt2800_rfcsr_write(rt2x00dev, 19, 0x4a);
|
|
rt2800_rfcsr_write(rt2x00dev, 20, 0xb2);
|
|
rt2800_rfcsr_write(rt2x00dev, 21, 0xf6);
|
|
rt2800_rfcsr_write(rt2x00dev, 22, 0x00);
|
|
rt2800_rfcsr_write(rt2x00dev, 23, 0x14);
|
|
rt2800_rfcsr_write(rt2x00dev, 24, 0x08);
|
|
rt2800_rfcsr_write(rt2x00dev, 25, 0x3d);
|
|
rt2800_rfcsr_write(rt2x00dev, 26, 0x85);
|
|
rt2800_rfcsr_write(rt2x00dev, 27, 0x00);
|
|
rt2800_rfcsr_write(rt2x00dev, 28, 0x41);
|
|
rt2800_rfcsr_write(rt2x00dev, 29, 0x8f);
|
|
rt2800_rfcsr_write(rt2x00dev, 30, 0x20);
|
|
rt2800_rfcsr_write(rt2x00dev, 31, 0x0f);
|
|
|
|
reg = rt2800_register_read(rt2x00dev, GPIO_SWITCH);
|
|
rt2x00_set_field32(®, GPIO_SWITCH_5, 0);
|
|
rt2800_register_write(rt2x00dev, GPIO_SWITCH, reg);
|
|
|
|
rt2800_rx_filter_calibration(rt2x00dev);
|
|
|
|
if (rt2x00_rt_rev_lt(rt2x00dev, RT3390, REV_RT3390E))
|
|
rt2800_rfcsr_write(rt2x00dev, 27, 0x03);
|
|
|
|
rt2800_led_open_drain_enable(rt2x00dev);
|
|
rt2800_normal_mode_setup_3xxx(rt2x00dev);
|
|
}
|
|
|
|
static void rt2800_init_rfcsr_3572(struct rt2x00_dev *rt2x00dev)
|
|
{
|
|
u8 rfcsr;
|
|
u32 reg;
|
|
|
|
rt2800_rf_init_calibration(rt2x00dev, 30);
|
|
|
|
rt2800_rfcsr_write(rt2x00dev, 0, 0x70);
|
|
rt2800_rfcsr_write(rt2x00dev, 1, 0x81);
|
|
rt2800_rfcsr_write(rt2x00dev, 2, 0xf1);
|
|
rt2800_rfcsr_write(rt2x00dev, 3, 0x02);
|
|
rt2800_rfcsr_write(rt2x00dev, 4, 0x4c);
|
|
rt2800_rfcsr_write(rt2x00dev, 5, 0x05);
|
|
rt2800_rfcsr_write(rt2x00dev, 6, 0x4a);
|
|
rt2800_rfcsr_write(rt2x00dev, 7, 0xd8);
|
|
rt2800_rfcsr_write(rt2x00dev, 9, 0xc3);
|
|
rt2800_rfcsr_write(rt2x00dev, 10, 0xf1);
|
|
rt2800_rfcsr_write(rt2x00dev, 11, 0xb9);
|
|
rt2800_rfcsr_write(rt2x00dev, 12, 0x70);
|
|
rt2800_rfcsr_write(rt2x00dev, 13, 0x65);
|
|
rt2800_rfcsr_write(rt2x00dev, 14, 0xa0);
|
|
rt2800_rfcsr_write(rt2x00dev, 15, 0x53);
|
|
rt2800_rfcsr_write(rt2x00dev, 16, 0x4c);
|
|
rt2800_rfcsr_write(rt2x00dev, 17, 0x23);
|
|
rt2800_rfcsr_write(rt2x00dev, 18, 0xac);
|
|
rt2800_rfcsr_write(rt2x00dev, 19, 0x93);
|
|
rt2800_rfcsr_write(rt2x00dev, 20, 0xb3);
|
|
rt2800_rfcsr_write(rt2x00dev, 21, 0xd0);
|
|
rt2800_rfcsr_write(rt2x00dev, 22, 0x00);
|
|
rt2800_rfcsr_write(rt2x00dev, 23, 0x3c);
|
|
rt2800_rfcsr_write(rt2x00dev, 24, 0x16);
|
|
rt2800_rfcsr_write(rt2x00dev, 25, 0x15);
|
|
rt2800_rfcsr_write(rt2x00dev, 26, 0x85);
|
|
rt2800_rfcsr_write(rt2x00dev, 27, 0x00);
|
|
rt2800_rfcsr_write(rt2x00dev, 28, 0x00);
|
|
rt2800_rfcsr_write(rt2x00dev, 29, 0x9b);
|
|
rt2800_rfcsr_write(rt2x00dev, 30, 0x09);
|
|
rt2800_rfcsr_write(rt2x00dev, 31, 0x10);
|
|
|
|
rfcsr = rt2800_rfcsr_read(rt2x00dev, 6);
|
|
rt2x00_set_field8(&rfcsr, RFCSR6_R2, 1);
|
|
rt2800_rfcsr_write(rt2x00dev, 6, rfcsr);
|
|
|
|
reg = rt2800_register_read(rt2x00dev, LDO_CFG0);
|
|
rt2x00_set_field32(®, LDO_CFG0_LDO_CORE_VLEVEL, 3);
|
|
rt2x00_set_field32(®, LDO_CFG0_BGSEL, 1);
|
|
rt2800_register_write(rt2x00dev, LDO_CFG0, reg);
|
|
msleep(1);
|
|
reg = rt2800_register_read(rt2x00dev, LDO_CFG0);
|
|
rt2x00_set_field32(®, LDO_CFG0_LDO_CORE_VLEVEL, 0);
|
|
rt2x00_set_field32(®, LDO_CFG0_BGSEL, 1);
|
|
rt2800_register_write(rt2x00dev, LDO_CFG0, reg);
|
|
|
|
rt2800_rx_filter_calibration(rt2x00dev);
|
|
rt2800_led_open_drain_enable(rt2x00dev);
|
|
rt2800_normal_mode_setup_3xxx(rt2x00dev);
|
|
}
|
|
|
|
static void rt3593_post_bbp_init(struct rt2x00_dev *rt2x00dev)
|
|
{
|
|
u8 bbp;
|
|
bool txbf_enabled = false; /* FIXME */
|
|
|
|
bbp = rt2800_bbp_read(rt2x00dev, 105);
|
|
if (rt2x00dev->default_ant.rx_chain_num == 1)
|
|
rt2x00_set_field8(&bbp, BBP105_MLD, 0);
|
|
else
|
|
rt2x00_set_field8(&bbp, BBP105_MLD, 1);
|
|
rt2800_bbp_write(rt2x00dev, 105, bbp);
|
|
|
|
rt2800_bbp4_mac_if_ctrl(rt2x00dev);
|
|
|
|
rt2800_bbp_write(rt2x00dev, 92, 0x02);
|
|
rt2800_bbp_write(rt2x00dev, 82, 0x82);
|
|
rt2800_bbp_write(rt2x00dev, 106, 0x05);
|
|
rt2800_bbp_write(rt2x00dev, 104, 0x92);
|
|
rt2800_bbp_write(rt2x00dev, 88, 0x90);
|
|
rt2800_bbp_write(rt2x00dev, 148, 0xc8);
|
|
rt2800_bbp_write(rt2x00dev, 47, 0x48);
|
|
rt2800_bbp_write(rt2x00dev, 120, 0x50);
|
|
|
|
if (txbf_enabled)
|
|
rt2800_bbp_write(rt2x00dev, 163, 0xbd);
|
|
else
|
|
rt2800_bbp_write(rt2x00dev, 163, 0x9d);
|
|
|
|
/* SNR mapping */
|
|
rt2800_bbp_write(rt2x00dev, 142, 6);
|
|
rt2800_bbp_write(rt2x00dev, 143, 160);
|
|
rt2800_bbp_write(rt2x00dev, 142, 7);
|
|
rt2800_bbp_write(rt2x00dev, 143, 161);
|
|
rt2800_bbp_write(rt2x00dev, 142, 8);
|
|
rt2800_bbp_write(rt2x00dev, 143, 162);
|
|
|
|
/* ADC/DAC control */
|
|
rt2800_bbp_write(rt2x00dev, 31, 0x08);
|
|
|
|
/* RX AGC energy lower bound in log2 */
|
|
rt2800_bbp_write(rt2x00dev, 68, 0x0b);
|
|
|
|
/* FIXME: BBP 105 owerwrite? */
|
|
rt2800_bbp_write(rt2x00dev, 105, 0x04);
|
|
|
|
}
|
|
|
|
static void rt2800_init_rfcsr_3593(struct rt2x00_dev *rt2x00dev)
|
|
{
|
|
struct rt2800_drv_data *drv_data = rt2x00dev->drv_data;
|
|
u32 reg;
|
|
u8 rfcsr;
|
|
|
|
/* Disable GPIO #4 and #7 function for LAN PE control */
|
|
reg = rt2800_register_read(rt2x00dev, GPIO_SWITCH);
|
|
rt2x00_set_field32(®, GPIO_SWITCH_4, 0);
|
|
rt2x00_set_field32(®, GPIO_SWITCH_7, 0);
|
|
rt2800_register_write(rt2x00dev, GPIO_SWITCH, reg);
|
|
|
|
/* Initialize default register values */
|
|
rt2800_rfcsr_write(rt2x00dev, 1, 0x03);
|
|
rt2800_rfcsr_write(rt2x00dev, 3, 0x80);
|
|
rt2800_rfcsr_write(rt2x00dev, 5, 0x00);
|
|
rt2800_rfcsr_write(rt2x00dev, 6, 0x40);
|
|
rt2800_rfcsr_write(rt2x00dev, 8, 0xf1);
|
|
rt2800_rfcsr_write(rt2x00dev, 9, 0x02);
|
|
rt2800_rfcsr_write(rt2x00dev, 10, 0xd3);
|
|
rt2800_rfcsr_write(rt2x00dev, 11, 0x40);
|
|
rt2800_rfcsr_write(rt2x00dev, 12, 0x4e);
|
|
rt2800_rfcsr_write(rt2x00dev, 13, 0x12);
|
|
rt2800_rfcsr_write(rt2x00dev, 18, 0x40);
|
|
rt2800_rfcsr_write(rt2x00dev, 22, 0x20);
|
|
rt2800_rfcsr_write(rt2x00dev, 30, 0x10);
|
|
rt2800_rfcsr_write(rt2x00dev, 31, 0x80);
|
|
rt2800_rfcsr_write(rt2x00dev, 32, 0x78);
|
|
rt2800_rfcsr_write(rt2x00dev, 33, 0x3b);
|
|
rt2800_rfcsr_write(rt2x00dev, 34, 0x3c);
|
|
rt2800_rfcsr_write(rt2x00dev, 35, 0xe0);
|
|
rt2800_rfcsr_write(rt2x00dev, 38, 0x86);
|
|
rt2800_rfcsr_write(rt2x00dev, 39, 0x23);
|
|
rt2800_rfcsr_write(rt2x00dev, 44, 0xd3);
|
|
rt2800_rfcsr_write(rt2x00dev, 45, 0xbb);
|
|
rt2800_rfcsr_write(rt2x00dev, 46, 0x60);
|
|
rt2800_rfcsr_write(rt2x00dev, 49, 0x8e);
|
|
rt2800_rfcsr_write(rt2x00dev, 50, 0x86);
|
|
rt2800_rfcsr_write(rt2x00dev, 51, 0x75);
|
|
rt2800_rfcsr_write(rt2x00dev, 52, 0x45);
|
|
rt2800_rfcsr_write(rt2x00dev, 53, 0x18);
|
|
rt2800_rfcsr_write(rt2x00dev, 54, 0x18);
|
|
rt2800_rfcsr_write(rt2x00dev, 55, 0x18);
|
|
rt2800_rfcsr_write(rt2x00dev, 56, 0xdb);
|
|
rt2800_rfcsr_write(rt2x00dev, 57, 0x6e);
|
|
|
|
/* Initiate calibration */
|
|
/* TODO: use rt2800_rf_init_calibration ? */
|
|
rfcsr = rt2800_rfcsr_read(rt2x00dev, 2);
|
|
rt2x00_set_field8(&rfcsr, RFCSR2_RESCAL_EN, 1);
|
|
rt2800_rfcsr_write(rt2x00dev, 2, rfcsr);
|
|
|
|
rt2800_freq_cal_mode1(rt2x00dev);
|
|
|
|
rfcsr = rt2800_rfcsr_read(rt2x00dev, 18);
|
|
rt2x00_set_field8(&rfcsr, RFCSR18_XO_TUNE_BYPASS, 1);
|
|
rt2800_rfcsr_write(rt2x00dev, 18, rfcsr);
|
|
|
|
reg = rt2800_register_read(rt2x00dev, LDO_CFG0);
|
|
rt2x00_set_field32(®, LDO_CFG0_LDO_CORE_VLEVEL, 3);
|
|
rt2x00_set_field32(®, LDO_CFG0_BGSEL, 1);
|
|
rt2800_register_write(rt2x00dev, LDO_CFG0, reg);
|
|
usleep_range(1000, 1500);
|
|
reg = rt2800_register_read(rt2x00dev, LDO_CFG0);
|
|
rt2x00_set_field32(®, LDO_CFG0_LDO_CORE_VLEVEL, 0);
|
|
rt2800_register_write(rt2x00dev, LDO_CFG0, reg);
|
|
|
|
/* Set initial values for RX filter calibration */
|
|
drv_data->calibration_bw20 = 0x1f;
|
|
drv_data->calibration_bw40 = 0x2f;
|
|
|
|
/* Save BBP 25 & 26 values for later use in channel switching */
|
|
drv_data->bbp25 = rt2800_bbp_read(rt2x00dev, 25);
|
|
drv_data->bbp26 = rt2800_bbp_read(rt2x00dev, 26);
|
|
|
|
rt2800_led_open_drain_enable(rt2x00dev);
|
|
rt2800_normal_mode_setup_3593(rt2x00dev);
|
|
|
|
rt3593_post_bbp_init(rt2x00dev);
|
|
|
|
/* TODO: enable stream mode support */
|
|
}
|
|
|
|
static void rt2800_init_rfcsr_5350(struct rt2x00_dev *rt2x00dev)
|
|
{
|
|
rt2800_rfcsr_write(rt2x00dev, 0, 0xf0);
|
|
rt2800_rfcsr_write(rt2x00dev, 1, 0x23);
|
|
rt2800_rfcsr_write(rt2x00dev, 2, 0x50);
|
|
rt2800_rfcsr_write(rt2x00dev, 3, 0x08);
|
|
rt2800_rfcsr_write(rt2x00dev, 4, 0x49);
|
|
rt2800_rfcsr_write(rt2x00dev, 5, 0x10);
|
|
rt2800_rfcsr_write(rt2x00dev, 6, 0xe0);
|
|
rt2800_rfcsr_write(rt2x00dev, 7, 0x00);
|
|
rt2800_rfcsr_write(rt2x00dev, 8, 0xf1);
|
|
rt2800_rfcsr_write(rt2x00dev, 9, 0x02);
|
|
rt2800_rfcsr_write(rt2x00dev, 10, 0x53);
|
|
rt2800_rfcsr_write(rt2x00dev, 11, 0x4a);
|
|
rt2800_rfcsr_write(rt2x00dev, 12, 0x46);
|
|
if (rt2800_clk_is_20mhz(rt2x00dev))
|
|
rt2800_rfcsr_write(rt2x00dev, 13, 0x1f);
|
|
else
|
|
rt2800_rfcsr_write(rt2x00dev, 13, 0x9f);
|
|
rt2800_rfcsr_write(rt2x00dev, 14, 0x00);
|
|
rt2800_rfcsr_write(rt2x00dev, 15, 0x00);
|
|
rt2800_rfcsr_write(rt2x00dev, 16, 0xc0);
|
|
rt2800_rfcsr_write(rt2x00dev, 18, 0x03);
|
|
rt2800_rfcsr_write(rt2x00dev, 19, 0x00);
|
|
rt2800_rfcsr_write(rt2x00dev, 20, 0x00);
|
|
rt2800_rfcsr_write(rt2x00dev, 21, 0x00);
|
|
rt2800_rfcsr_write(rt2x00dev, 22, 0x20);
|
|
rt2800_rfcsr_write(rt2x00dev, 23, 0x00);
|
|
rt2800_rfcsr_write(rt2x00dev, 24, 0x00);
|
|
rt2800_rfcsr_write(rt2x00dev, 25, 0x80);
|
|
rt2800_rfcsr_write(rt2x00dev, 26, 0x00);
|
|
rt2800_rfcsr_write(rt2x00dev, 27, 0x03);
|
|
rt2800_rfcsr_write(rt2x00dev, 28, 0x00);
|
|
rt2800_rfcsr_write(rt2x00dev, 29, 0xd0);
|
|
rt2800_rfcsr_write(rt2x00dev, 30, 0x10);
|
|
rt2800_rfcsr_write(rt2x00dev, 31, 0x80);
|
|
rt2800_rfcsr_write(rt2x00dev, 32, 0x80);
|
|
rt2800_rfcsr_write(rt2x00dev, 33, 0x00);
|
|
rt2800_rfcsr_write(rt2x00dev, 34, 0x07);
|
|
rt2800_rfcsr_write(rt2x00dev, 35, 0x12);
|
|
rt2800_rfcsr_write(rt2x00dev, 36, 0x00);
|
|
rt2800_rfcsr_write(rt2x00dev, 37, 0x08);
|
|
rt2800_rfcsr_write(rt2x00dev, 38, 0x85);
|
|
rt2800_rfcsr_write(rt2x00dev, 39, 0x1b);
|
|
rt2800_rfcsr_write(rt2x00dev, 40, 0x0b);
|
|
rt2800_rfcsr_write(rt2x00dev, 41, 0xbb);
|
|
rt2800_rfcsr_write(rt2x00dev, 42, 0xd5);
|
|
rt2800_rfcsr_write(rt2x00dev, 43, 0x9b);
|
|
rt2800_rfcsr_write(rt2x00dev, 44, 0x0c);
|
|
rt2800_rfcsr_write(rt2x00dev, 45, 0xa6);
|
|
rt2800_rfcsr_write(rt2x00dev, 46, 0x73);
|
|
rt2800_rfcsr_write(rt2x00dev, 47, 0x00);
|
|
rt2800_rfcsr_write(rt2x00dev, 48, 0x10);
|
|
rt2800_rfcsr_write(rt2x00dev, 49, 0x80);
|
|
rt2800_rfcsr_write(rt2x00dev, 50, 0x00);
|
|
rt2800_rfcsr_write(rt2x00dev, 51, 0x00);
|
|
rt2800_rfcsr_write(rt2x00dev, 52, 0x38);
|
|
rt2800_rfcsr_write(rt2x00dev, 53, 0x00);
|
|
rt2800_rfcsr_write(rt2x00dev, 54, 0x38);
|
|
rt2800_rfcsr_write(rt2x00dev, 55, 0x43);
|
|
rt2800_rfcsr_write(rt2x00dev, 56, 0x82);
|
|
rt2800_rfcsr_write(rt2x00dev, 57, 0x00);
|
|
rt2800_rfcsr_write(rt2x00dev, 58, 0x39);
|
|
rt2800_rfcsr_write(rt2x00dev, 59, 0x0b);
|
|
rt2800_rfcsr_write(rt2x00dev, 60, 0x45);
|
|
rt2800_rfcsr_write(rt2x00dev, 61, 0xd1);
|
|
rt2800_rfcsr_write(rt2x00dev, 62, 0x00);
|
|
rt2800_rfcsr_write(rt2x00dev, 63, 0x00);
|
|
}
|
|
|
|
static void rt2800_init_rfcsr_3883(struct rt2x00_dev *rt2x00dev)
|
|
{
|
|
u8 rfcsr;
|
|
|
|
/* TODO: get the actual ECO value from the SoC */
|
|
const unsigned int eco = 5;
|
|
|
|
rt2800_rf_init_calibration(rt2x00dev, 2);
|
|
|
|
rt2800_rfcsr_write(rt2x00dev, 0, 0xe0);
|
|
rt2800_rfcsr_write(rt2x00dev, 1, 0x03);
|
|
rt2800_rfcsr_write(rt2x00dev, 2, 0x50);
|
|
rt2800_rfcsr_write(rt2x00dev, 3, 0x20);
|
|
rt2800_rfcsr_write(rt2x00dev, 4, 0x00);
|
|
rt2800_rfcsr_write(rt2x00dev, 5, 0x00);
|
|
rt2800_rfcsr_write(rt2x00dev, 6, 0x40);
|
|
rt2800_rfcsr_write(rt2x00dev, 7, 0x00);
|
|
rt2800_rfcsr_write(rt2x00dev, 8, 0x5b);
|
|
rt2800_rfcsr_write(rt2x00dev, 9, 0x08);
|
|
rt2800_rfcsr_write(rt2x00dev, 10, 0xd3);
|
|
rt2800_rfcsr_write(rt2x00dev, 11, 0x48);
|
|
rt2800_rfcsr_write(rt2x00dev, 12, 0x1a);
|
|
rt2800_rfcsr_write(rt2x00dev, 13, 0x12);
|
|
rt2800_rfcsr_write(rt2x00dev, 14, 0x00);
|
|
rt2800_rfcsr_write(rt2x00dev, 15, 0x00);
|
|
rt2800_rfcsr_write(rt2x00dev, 16, 0x00);
|
|
|
|
/* RFCSR 17 will be initialized later based on the
|
|
* frequency offset stored in the EEPROM
|
|
*/
|
|
|
|
rt2800_rfcsr_write(rt2x00dev, 18, 0x40);
|
|
rt2800_rfcsr_write(rt2x00dev, 19, 0x00);
|
|
rt2800_rfcsr_write(rt2x00dev, 20, 0x00);
|
|
rt2800_rfcsr_write(rt2x00dev, 21, 0x00);
|
|
rt2800_rfcsr_write(rt2x00dev, 22, 0x20);
|
|
rt2800_rfcsr_write(rt2x00dev, 23, 0xc0);
|
|
rt2800_rfcsr_write(rt2x00dev, 24, 0x00);
|
|
rt2800_rfcsr_write(rt2x00dev, 25, 0x00);
|
|
rt2800_rfcsr_write(rt2x00dev, 26, 0x00);
|
|
rt2800_rfcsr_write(rt2x00dev, 27, 0x00);
|
|
rt2800_rfcsr_write(rt2x00dev, 28, 0x00);
|
|
rt2800_rfcsr_write(rt2x00dev, 29, 0x00);
|
|
rt2800_rfcsr_write(rt2x00dev, 30, 0x10);
|
|
rt2800_rfcsr_write(rt2x00dev, 31, 0x80);
|
|
rt2800_rfcsr_write(rt2x00dev, 32, 0x80);
|
|
rt2800_rfcsr_write(rt2x00dev, 33, 0x00);
|
|
rt2800_rfcsr_write(rt2x00dev, 34, 0x20);
|
|
rt2800_rfcsr_write(rt2x00dev, 35, 0x00);
|
|
rt2800_rfcsr_write(rt2x00dev, 36, 0x00);
|
|
rt2800_rfcsr_write(rt2x00dev, 37, 0x00);
|
|
rt2800_rfcsr_write(rt2x00dev, 38, 0x86);
|
|
rt2800_rfcsr_write(rt2x00dev, 39, 0x23);
|
|
rt2800_rfcsr_write(rt2x00dev, 40, 0x00);
|
|
rt2800_rfcsr_write(rt2x00dev, 41, 0x00);
|
|
rt2800_rfcsr_write(rt2x00dev, 42, 0x00);
|
|
rt2800_rfcsr_write(rt2x00dev, 43, 0x00);
|
|
rt2800_rfcsr_write(rt2x00dev, 44, 0x93);
|
|
rt2800_rfcsr_write(rt2x00dev, 45, 0xbb);
|
|
rt2800_rfcsr_write(rt2x00dev, 46, 0x60);
|
|
rt2800_rfcsr_write(rt2x00dev, 47, 0x00);
|
|
rt2800_rfcsr_write(rt2x00dev, 48, 0x00);
|
|
rt2800_rfcsr_write(rt2x00dev, 49, 0x8e);
|
|
rt2800_rfcsr_write(rt2x00dev, 50, 0x86);
|
|
rt2800_rfcsr_write(rt2x00dev, 51, 0x51);
|
|
rt2800_rfcsr_write(rt2x00dev, 52, 0x05);
|
|
rt2800_rfcsr_write(rt2x00dev, 53, 0x76);
|
|
rt2800_rfcsr_write(rt2x00dev, 54, 0x76);
|
|
rt2800_rfcsr_write(rt2x00dev, 55, 0x76);
|
|
rt2800_rfcsr_write(rt2x00dev, 56, 0xdb);
|
|
rt2800_rfcsr_write(rt2x00dev, 57, 0x3e);
|
|
rt2800_rfcsr_write(rt2x00dev, 58, 0x00);
|
|
rt2800_rfcsr_write(rt2x00dev, 59, 0x00);
|
|
rt2800_rfcsr_write(rt2x00dev, 60, 0x00);
|
|
rt2800_rfcsr_write(rt2x00dev, 61, 0x00);
|
|
rt2800_rfcsr_write(rt2x00dev, 62, 0x00);
|
|
rt2800_rfcsr_write(rt2x00dev, 63, 0x00);
|
|
|
|
/* TODO: rx filter calibration? */
|
|
|
|
rt2800_bbp_write(rt2x00dev, 137, 0x0f);
|
|
|
|
rt2800_bbp_write(rt2x00dev, 163, 0x9d);
|
|
|
|
rt2800_bbp_write(rt2x00dev, 105, 0x05);
|
|
|
|
rt2800_bbp_write(rt2x00dev, 179, 0x02);
|
|
rt2800_bbp_write(rt2x00dev, 180, 0x00);
|
|
rt2800_bbp_write(rt2x00dev, 182, 0x40);
|
|
rt2800_bbp_write(rt2x00dev, 180, 0x01);
|
|
rt2800_bbp_write(rt2x00dev, 182, 0x9c);
|
|
|
|
rt2800_bbp_write(rt2x00dev, 179, 0x00);
|
|
|
|
rt2800_bbp_write(rt2x00dev, 142, 0x04);
|
|
rt2800_bbp_write(rt2x00dev, 143, 0x3b);
|
|
rt2800_bbp_write(rt2x00dev, 142, 0x06);
|
|
rt2800_bbp_write(rt2x00dev, 143, 0xa0);
|
|
rt2800_bbp_write(rt2x00dev, 142, 0x07);
|
|
rt2800_bbp_write(rt2x00dev, 143, 0xa1);
|
|
rt2800_bbp_write(rt2x00dev, 142, 0x08);
|
|
rt2800_bbp_write(rt2x00dev, 143, 0xa2);
|
|
rt2800_bbp_write(rt2x00dev, 148, 0xc8);
|
|
|
|
if (eco == 5) {
|
|
rt2800_rfcsr_write(rt2x00dev, 32, 0xd8);
|
|
rt2800_rfcsr_write(rt2x00dev, 33, 0x32);
|
|
}
|
|
|
|
rfcsr = rt2800_rfcsr_read(rt2x00dev, 2);
|
|
rt2x00_set_field8(&rfcsr, RFCSR2_RESCAL_BP, 0);
|
|
rt2x00_set_field8(&rfcsr, RFCSR2_RESCAL_EN, 1);
|
|
rt2800_rfcsr_write(rt2x00dev, 2, rfcsr);
|
|
msleep(1);
|
|
rt2x00_set_field8(&rfcsr, RFCSR2_RESCAL_EN, 0);
|
|
rt2800_rfcsr_write(rt2x00dev, 2, rfcsr);
|
|
|
|
rfcsr = rt2800_rfcsr_read(rt2x00dev, 1);
|
|
rt2x00_set_field8(&rfcsr, RFCSR1_RF_BLOCK_EN, 1);
|
|
rt2800_rfcsr_write(rt2x00dev, 1, rfcsr);
|
|
|
|
rfcsr = rt2800_rfcsr_read(rt2x00dev, 6);
|
|
rfcsr |= 0xc0;
|
|
rt2800_rfcsr_write(rt2x00dev, 6, rfcsr);
|
|
|
|
rfcsr = rt2800_rfcsr_read(rt2x00dev, 22);
|
|
rfcsr |= 0x20;
|
|
rt2800_rfcsr_write(rt2x00dev, 22, rfcsr);
|
|
|
|
rfcsr = rt2800_rfcsr_read(rt2x00dev, 46);
|
|
rfcsr |= 0x20;
|
|
rt2800_rfcsr_write(rt2x00dev, 46, rfcsr);
|
|
|
|
rfcsr = rt2800_rfcsr_read(rt2x00dev, 20);
|
|
rfcsr &= ~0xee;
|
|
rt2800_rfcsr_write(rt2x00dev, 20, rfcsr);
|
|
}
|
|
|
|
static void rt2800_init_rfcsr_5390(struct rt2x00_dev *rt2x00dev)
|
|
{
|
|
rt2800_rf_init_calibration(rt2x00dev, 2);
|
|
|
|
rt2800_rfcsr_write(rt2x00dev, 1, 0x0f);
|
|
rt2800_rfcsr_write(rt2x00dev, 2, 0x80);
|
|
rt2800_rfcsr_write(rt2x00dev, 3, 0x88);
|
|
rt2800_rfcsr_write(rt2x00dev, 5, 0x10);
|
|
if (rt2x00_rt_rev_gte(rt2x00dev, RT5390, REV_RT5390F))
|
|
rt2800_rfcsr_write(rt2x00dev, 6, 0xe0);
|
|
else
|
|
rt2800_rfcsr_write(rt2x00dev, 6, 0xa0);
|
|
rt2800_rfcsr_write(rt2x00dev, 7, 0x00);
|
|
rt2800_rfcsr_write(rt2x00dev, 10, 0x53);
|
|
rt2800_rfcsr_write(rt2x00dev, 11, 0x4a);
|
|
rt2800_rfcsr_write(rt2x00dev, 12, 0x46);
|
|
rt2800_rfcsr_write(rt2x00dev, 13, 0x9f);
|
|
rt2800_rfcsr_write(rt2x00dev, 14, 0x00);
|
|
rt2800_rfcsr_write(rt2x00dev, 15, 0x00);
|
|
rt2800_rfcsr_write(rt2x00dev, 16, 0x00);
|
|
rt2800_rfcsr_write(rt2x00dev, 18, 0x03);
|
|
rt2800_rfcsr_write(rt2x00dev, 19, 0x00);
|
|
|
|
rt2800_rfcsr_write(rt2x00dev, 20, 0x00);
|
|
rt2800_rfcsr_write(rt2x00dev, 21, 0x00);
|
|
rt2800_rfcsr_write(rt2x00dev, 22, 0x20);
|
|
rt2800_rfcsr_write(rt2x00dev, 23, 0x00);
|
|
rt2800_rfcsr_write(rt2x00dev, 24, 0x00);
|
|
if (rt2x00_is_usb(rt2x00dev) &&
|
|
rt2x00_rt_rev_gte(rt2x00dev, RT5390, REV_RT5390F))
|
|
rt2800_rfcsr_write(rt2x00dev, 25, 0x80);
|
|
else
|
|
rt2800_rfcsr_write(rt2x00dev, 25, 0xc0);
|
|
rt2800_rfcsr_write(rt2x00dev, 26, 0x00);
|
|
rt2800_rfcsr_write(rt2x00dev, 27, 0x09);
|
|
rt2800_rfcsr_write(rt2x00dev, 28, 0x00);
|
|
rt2800_rfcsr_write(rt2x00dev, 29, 0x10);
|
|
|
|
rt2800_rfcsr_write(rt2x00dev, 30, 0x10);
|
|
rt2800_rfcsr_write(rt2x00dev, 31, 0x80);
|
|
rt2800_rfcsr_write(rt2x00dev, 32, 0x80);
|
|
rt2800_rfcsr_write(rt2x00dev, 33, 0x00);
|
|
rt2800_rfcsr_write(rt2x00dev, 34, 0x07);
|
|
rt2800_rfcsr_write(rt2x00dev, 35, 0x12);
|
|
rt2800_rfcsr_write(rt2x00dev, 36, 0x00);
|
|
rt2800_rfcsr_write(rt2x00dev, 37, 0x08);
|
|
rt2800_rfcsr_write(rt2x00dev, 38, 0x85);
|
|
rt2800_rfcsr_write(rt2x00dev, 39, 0x1b);
|
|
|
|
rt2800_rfcsr_write(rt2x00dev, 40, 0x0b);
|
|
rt2800_rfcsr_write(rt2x00dev, 41, 0xbb);
|
|
rt2800_rfcsr_write(rt2x00dev, 42, 0xd2);
|
|
rt2800_rfcsr_write(rt2x00dev, 43, 0x9a);
|
|
rt2800_rfcsr_write(rt2x00dev, 44, 0x0e);
|
|
rt2800_rfcsr_write(rt2x00dev, 45, 0xa2);
|
|
if (rt2x00_rt_rev_gte(rt2x00dev, RT5390, REV_RT5390F))
|
|
rt2800_rfcsr_write(rt2x00dev, 46, 0x73);
|
|
else
|
|
rt2800_rfcsr_write(rt2x00dev, 46, 0x7b);
|
|
rt2800_rfcsr_write(rt2x00dev, 47, 0x00);
|
|
rt2800_rfcsr_write(rt2x00dev, 48, 0x10);
|
|
rt2800_rfcsr_write(rt2x00dev, 49, 0x94);
|
|
|
|
rt2800_rfcsr_write(rt2x00dev, 52, 0x38);
|
|
if (rt2x00_rt_rev_gte(rt2x00dev, RT5390, REV_RT5390F))
|
|
rt2800_rfcsr_write(rt2x00dev, 53, 0x00);
|
|
else
|
|
rt2800_rfcsr_write(rt2x00dev, 53, 0x84);
|
|
rt2800_rfcsr_write(rt2x00dev, 54, 0x78);
|
|
rt2800_rfcsr_write(rt2x00dev, 55, 0x44);
|
|
if (rt2x00_rt_rev_gte(rt2x00dev, RT5390, REV_RT5390F))
|
|
rt2800_rfcsr_write(rt2x00dev, 56, 0x42);
|
|
else
|
|
rt2800_rfcsr_write(rt2x00dev, 56, 0x22);
|
|
rt2800_rfcsr_write(rt2x00dev, 57, 0x80);
|
|
rt2800_rfcsr_write(rt2x00dev, 58, 0x7f);
|
|
rt2800_rfcsr_write(rt2x00dev, 59, 0x8f);
|
|
|
|
rt2800_rfcsr_write(rt2x00dev, 60, 0x45);
|
|
if (rt2x00_rt_rev_gte(rt2x00dev, RT5390, REV_RT5390F)) {
|
|
if (rt2x00_is_usb(rt2x00dev))
|
|
rt2800_rfcsr_write(rt2x00dev, 61, 0xd1);
|
|
else
|
|
rt2800_rfcsr_write(rt2x00dev, 61, 0xd5);
|
|
} else {
|
|
if (rt2x00_is_usb(rt2x00dev))
|
|
rt2800_rfcsr_write(rt2x00dev, 61, 0xdd);
|
|
else
|
|
rt2800_rfcsr_write(rt2x00dev, 61, 0xb5);
|
|
}
|
|
rt2800_rfcsr_write(rt2x00dev, 62, 0x00);
|
|
rt2800_rfcsr_write(rt2x00dev, 63, 0x00);
|
|
|
|
rt2800_normal_mode_setup_5xxx(rt2x00dev);
|
|
|
|
rt2800_led_open_drain_enable(rt2x00dev);
|
|
}
|
|
|
|
static void rt2800_init_rfcsr_5392(struct rt2x00_dev *rt2x00dev)
|
|
{
|
|
rt2800_rf_init_calibration(rt2x00dev, 2);
|
|
|
|
rt2800_rfcsr_write(rt2x00dev, 1, 0x17);
|
|
rt2800_rfcsr_write(rt2x00dev, 3, 0x88);
|
|
rt2800_rfcsr_write(rt2x00dev, 5, 0x10);
|
|
rt2800_rfcsr_write(rt2x00dev, 6, 0xe0);
|
|
rt2800_rfcsr_write(rt2x00dev, 7, 0x00);
|
|
rt2800_rfcsr_write(rt2x00dev, 10, 0x53);
|
|
rt2800_rfcsr_write(rt2x00dev, 11, 0x4a);
|
|
rt2800_rfcsr_write(rt2x00dev, 12, 0x46);
|
|
rt2800_rfcsr_write(rt2x00dev, 13, 0x9f);
|
|
rt2800_rfcsr_write(rt2x00dev, 14, 0x00);
|
|
rt2800_rfcsr_write(rt2x00dev, 15, 0x00);
|
|
rt2800_rfcsr_write(rt2x00dev, 16, 0x00);
|
|
rt2800_rfcsr_write(rt2x00dev, 18, 0x03);
|
|
rt2800_rfcsr_write(rt2x00dev, 19, 0x4d);
|
|
rt2800_rfcsr_write(rt2x00dev, 20, 0x00);
|
|
rt2800_rfcsr_write(rt2x00dev, 21, 0x8d);
|
|
rt2800_rfcsr_write(rt2x00dev, 22, 0x20);
|
|
rt2800_rfcsr_write(rt2x00dev, 23, 0x0b);
|
|
rt2800_rfcsr_write(rt2x00dev, 24, 0x44);
|
|
rt2800_rfcsr_write(rt2x00dev, 25, 0x80);
|
|
rt2800_rfcsr_write(rt2x00dev, 26, 0x82);
|
|
rt2800_rfcsr_write(rt2x00dev, 27, 0x09);
|
|
rt2800_rfcsr_write(rt2x00dev, 28, 0x00);
|
|
rt2800_rfcsr_write(rt2x00dev, 29, 0x10);
|
|
rt2800_rfcsr_write(rt2x00dev, 30, 0x10);
|
|
rt2800_rfcsr_write(rt2x00dev, 31, 0x80);
|
|
rt2800_rfcsr_write(rt2x00dev, 32, 0x20);
|
|
rt2800_rfcsr_write(rt2x00dev, 33, 0xC0);
|
|
rt2800_rfcsr_write(rt2x00dev, 34, 0x07);
|
|
rt2800_rfcsr_write(rt2x00dev, 35, 0x12);
|
|
rt2800_rfcsr_write(rt2x00dev, 36, 0x00);
|
|
rt2800_rfcsr_write(rt2x00dev, 37, 0x08);
|
|
rt2800_rfcsr_write(rt2x00dev, 38, 0x89);
|
|
rt2800_rfcsr_write(rt2x00dev, 39, 0x1b);
|
|
rt2800_rfcsr_write(rt2x00dev, 40, 0x0f);
|
|
rt2800_rfcsr_write(rt2x00dev, 41, 0xbb);
|
|
rt2800_rfcsr_write(rt2x00dev, 42, 0xd5);
|
|
rt2800_rfcsr_write(rt2x00dev, 43, 0x9b);
|
|
rt2800_rfcsr_write(rt2x00dev, 44, 0x0e);
|
|
rt2800_rfcsr_write(rt2x00dev, 45, 0xa2);
|
|
rt2800_rfcsr_write(rt2x00dev, 46, 0x73);
|
|
rt2800_rfcsr_write(rt2x00dev, 47, 0x0c);
|
|
rt2800_rfcsr_write(rt2x00dev, 48, 0x10);
|
|
rt2800_rfcsr_write(rt2x00dev, 49, 0x94);
|
|
rt2800_rfcsr_write(rt2x00dev, 50, 0x94);
|
|
rt2800_rfcsr_write(rt2x00dev, 51, 0x3a);
|
|
rt2800_rfcsr_write(rt2x00dev, 52, 0x48);
|
|
rt2800_rfcsr_write(rt2x00dev, 53, 0x44);
|
|
rt2800_rfcsr_write(rt2x00dev, 54, 0x38);
|
|
rt2800_rfcsr_write(rt2x00dev, 55, 0x43);
|
|
rt2800_rfcsr_write(rt2x00dev, 56, 0xa1);
|
|
rt2800_rfcsr_write(rt2x00dev, 57, 0x00);
|
|
rt2800_rfcsr_write(rt2x00dev, 58, 0x39);
|
|
rt2800_rfcsr_write(rt2x00dev, 59, 0x07);
|
|
rt2800_rfcsr_write(rt2x00dev, 60, 0x45);
|
|
rt2800_rfcsr_write(rt2x00dev, 61, 0x91);
|
|
rt2800_rfcsr_write(rt2x00dev, 62, 0x39);
|
|
rt2800_rfcsr_write(rt2x00dev, 63, 0x07);
|
|
|
|
rt2800_normal_mode_setup_5xxx(rt2x00dev);
|
|
|
|
rt2800_led_open_drain_enable(rt2x00dev);
|
|
}
|
|
|
|
static void rt2800_init_rfcsr_5592(struct rt2x00_dev *rt2x00dev)
|
|
{
|
|
rt2800_rf_init_calibration(rt2x00dev, 30);
|
|
|
|
rt2800_rfcsr_write(rt2x00dev, 1, 0x3F);
|
|
rt2800_rfcsr_write(rt2x00dev, 3, 0x08);
|
|
rt2800_rfcsr_write(rt2x00dev, 5, 0x10);
|
|
rt2800_rfcsr_write(rt2x00dev, 6, 0xE4);
|
|
rt2800_rfcsr_write(rt2x00dev, 7, 0x00);
|
|
rt2800_rfcsr_write(rt2x00dev, 14, 0x00);
|
|
rt2800_rfcsr_write(rt2x00dev, 15, 0x00);
|
|
rt2800_rfcsr_write(rt2x00dev, 16, 0x00);
|
|
rt2800_rfcsr_write(rt2x00dev, 18, 0x03);
|
|
rt2800_rfcsr_write(rt2x00dev, 19, 0x4D);
|
|
rt2800_rfcsr_write(rt2x00dev, 20, 0x10);
|
|
rt2800_rfcsr_write(rt2x00dev, 21, 0x8D);
|
|
rt2800_rfcsr_write(rt2x00dev, 26, 0x82);
|
|
rt2800_rfcsr_write(rt2x00dev, 28, 0x00);
|
|
rt2800_rfcsr_write(rt2x00dev, 29, 0x10);
|
|
rt2800_rfcsr_write(rt2x00dev, 33, 0xC0);
|
|
rt2800_rfcsr_write(rt2x00dev, 34, 0x07);
|
|
rt2800_rfcsr_write(rt2x00dev, 35, 0x12);
|
|
rt2800_rfcsr_write(rt2x00dev, 47, 0x0C);
|
|
rt2800_rfcsr_write(rt2x00dev, 53, 0x22);
|
|
rt2800_rfcsr_write(rt2x00dev, 63, 0x07);
|
|
|
|
rt2800_rfcsr_write(rt2x00dev, 2, 0x80);
|
|
msleep(1);
|
|
|
|
rt2800_freq_cal_mode1(rt2x00dev);
|
|
|
|
/* Enable DC filter */
|
|
if (rt2x00_rt_rev_gte(rt2x00dev, RT5592, REV_RT5592C))
|
|
rt2800_bbp_write(rt2x00dev, 103, 0xc0);
|
|
|
|
rt2800_normal_mode_setup_5xxx(rt2x00dev);
|
|
|
|
if (rt2x00_rt_rev_lt(rt2x00dev, RT5592, REV_RT5592C))
|
|
rt2800_rfcsr_write(rt2x00dev, 27, 0x03);
|
|
|
|
rt2800_led_open_drain_enable(rt2x00dev);
|
|
}
|
|
|
|
static void rt2800_rf_self_txdc_cal(struct rt2x00_dev *rt2x00dev)
|
|
{
|
|
u8 rfb5r1_org, rfb7r1_org, rfvalue;
|
|
u32 mac0518, mac051c, mac0528, mac052c;
|
|
u8 i;
|
|
|
|
mac0518 = rt2800_register_read(rt2x00dev, RF_CONTROL0);
|
|
mac051c = rt2800_register_read(rt2x00dev, RF_BYPASS0);
|
|
mac0528 = rt2800_register_read(rt2x00dev, RF_CONTROL2);
|
|
mac052c = rt2800_register_read(rt2x00dev, RF_BYPASS2);
|
|
|
|
rt2800_register_write(rt2x00dev, RF_BYPASS0, 0x0);
|
|
rt2800_register_write(rt2x00dev, RF_BYPASS2, 0x0);
|
|
|
|
rt2800_register_write(rt2x00dev, RF_CONTROL0, 0xC);
|
|
rt2800_register_write(rt2x00dev, RF_BYPASS0, 0x3306);
|
|
rt2800_register_write(rt2x00dev, RF_CONTROL2, 0x3330);
|
|
rt2800_register_write(rt2x00dev, RF_BYPASS2, 0xfffff);
|
|
rfb5r1_org = rt2800_rfcsr_read_bank(rt2x00dev, 5, 1);
|
|
rfb7r1_org = rt2800_rfcsr_read_bank(rt2x00dev, 7, 1);
|
|
|
|
rt2800_rfcsr_write_bank(rt2x00dev, 5, 1, 0x4);
|
|
for (i = 0; i < 100; ++i) {
|
|
usleep_range(50, 100);
|
|
rfvalue = rt2800_rfcsr_read_bank(rt2x00dev, 5, 1);
|
|
if ((rfvalue & 0x04) != 0x4)
|
|
break;
|
|
}
|
|
rt2800_rfcsr_write_bank(rt2x00dev, 5, 1, rfb5r1_org);
|
|
|
|
rt2800_rfcsr_write_bank(rt2x00dev, 7, 1, 0x4);
|
|
for (i = 0; i < 100; ++i) {
|
|
usleep_range(50, 100);
|
|
rfvalue = rt2800_rfcsr_read_bank(rt2x00dev, 7, 1);
|
|
if ((rfvalue & 0x04) != 0x4)
|
|
break;
|
|
}
|
|
rt2800_rfcsr_write_bank(rt2x00dev, 7, 1, rfb7r1_org);
|
|
|
|
rt2800_register_write(rt2x00dev, RF_BYPASS0, 0x0);
|
|
rt2800_register_write(rt2x00dev, RF_BYPASS2, 0x0);
|
|
rt2800_register_write(rt2x00dev, RF_CONTROL0, mac0518);
|
|
rt2800_register_write(rt2x00dev, RF_BYPASS0, mac051c);
|
|
rt2800_register_write(rt2x00dev, RF_CONTROL2, mac0528);
|
|
rt2800_register_write(rt2x00dev, RF_BYPASS2, mac052c);
|
|
}
|
|
|
|
static int rt2800_calcrcalibrationcode(struct rt2x00_dev *rt2x00dev, int d1, int d2)
|
|
{
|
|
int calcode = ((d2 - d1) * 1000) / 43;
|
|
|
|
if ((calcode % 10) >= 5)
|
|
calcode += 10;
|
|
calcode = (calcode / 10);
|
|
|
|
return calcode;
|
|
}
|
|
|
|
static void rt2800_r_calibration(struct rt2x00_dev *rt2x00dev)
|
|
{
|
|
u32 savemacsysctrl;
|
|
u8 saverfb0r1, saverfb0r34, saverfb0r35;
|
|
u8 saverfb5r4, saverfb5r17, saverfb5r18;
|
|
u8 saverfb5r19, saverfb5r20;
|
|
u8 savebbpr22, savebbpr47, savebbpr49;
|
|
u8 bytevalue = 0;
|
|
int rcalcode;
|
|
u8 r_cal_code = 0;
|
|
s8 d1 = 0, d2 = 0;
|
|
u8 rfvalue;
|
|
u32 MAC_RF_BYPASS0, MAC_RF_CONTROL0, MAC_PWR_PIN_CFG;
|
|
u32 maccfg;
|
|
|
|
saverfb0r1 = rt2800_rfcsr_read_bank(rt2x00dev, 0, 1);
|
|
saverfb0r34 = rt2800_rfcsr_read_bank(rt2x00dev, 0, 34);
|
|
saverfb0r35 = rt2800_rfcsr_read_bank(rt2x00dev, 0, 35);
|
|
saverfb5r4 = rt2800_rfcsr_read_bank(rt2x00dev, 5, 4);
|
|
saverfb5r17 = rt2800_rfcsr_read_bank(rt2x00dev, 5, 17);
|
|
saverfb5r18 = rt2800_rfcsr_read_bank(rt2x00dev, 5, 18);
|
|
saverfb5r19 = rt2800_rfcsr_read_bank(rt2x00dev, 5, 19);
|
|
saverfb5r20 = rt2800_rfcsr_read_bank(rt2x00dev, 5, 20);
|
|
|
|
savebbpr22 = rt2800_bbp_read(rt2x00dev, 22);
|
|
savebbpr47 = rt2800_bbp_read(rt2x00dev, 47);
|
|
savebbpr49 = rt2800_bbp_read(rt2x00dev, 49);
|
|
|
|
savemacsysctrl = rt2800_register_read(rt2x00dev, MAC_SYS_CTRL);
|
|
MAC_RF_BYPASS0 = rt2800_register_read(rt2x00dev, RF_BYPASS0);
|
|
MAC_RF_CONTROL0 = rt2800_register_read(rt2x00dev, RF_CONTROL0);
|
|
MAC_PWR_PIN_CFG = rt2800_register_read(rt2x00dev, PWR_PIN_CFG);
|
|
|
|
maccfg = rt2800_register_read(rt2x00dev, MAC_SYS_CTRL);
|
|
maccfg &= (~0x04);
|
|
rt2800_register_write(rt2x00dev, MAC_SYS_CTRL, maccfg);
|
|
|
|
if (unlikely(rt2800_wait_bbp_rf_ready(rt2x00dev, MAC_STATUS_CFG_BBP_RF_BUSY_TX)))
|
|
rt2x00_warn(rt2x00dev, "Wait MAC Tx Status to MAX !!!\n");
|
|
|
|
maccfg = rt2800_register_read(rt2x00dev, MAC_SYS_CTRL);
|
|
maccfg &= (~0x04);
|
|
rt2800_register_write(rt2x00dev, MAC_SYS_CTRL, maccfg);
|
|
|
|
if (unlikely(rt2800_wait_bbp_rf_ready(rt2x00dev, MAC_STATUS_CFG_BBP_RF_BUSY_RX)))
|
|
rt2x00_warn(rt2x00dev, "Wait MAC Rx Status to MAX !!!\n");
|
|
|
|
rfvalue = (MAC_RF_BYPASS0 | 0x3004);
|
|
rt2800_register_write(rt2x00dev, RF_BYPASS0, rfvalue);
|
|
rfvalue = (MAC_RF_CONTROL0 | (~0x3002));
|
|
rt2800_register_write(rt2x00dev, RF_CONTROL0, rfvalue);
|
|
|
|
rt2800_rfcsr_write_bank(rt2x00dev, 5, 4, 0x27);
|
|
rt2800_rfcsr_write_bank(rt2x00dev, 5, 17, 0x80);
|
|
rt2800_rfcsr_write_bank(rt2x00dev, 5, 18, 0x83);
|
|
rt2800_rfcsr_write_bank(rt2x00dev, 5, 19, 0x00);
|
|
rt2800_rfcsr_write_bank(rt2x00dev, 5, 20, 0x20);
|
|
|
|
rt2800_rfcsr_write_bank(rt2x00dev, 0, 1, 0x00);
|
|
rt2800_rfcsr_write_bank(rt2x00dev, 0, 34, 0x13);
|
|
rt2800_rfcsr_write_bank(rt2x00dev, 0, 35, 0x00);
|
|
|
|
rt2800_register_write(rt2x00dev, PWR_PIN_CFG, 0x1);
|
|
|
|
rt2800_bbp_write(rt2x00dev, 47, 0x04);
|
|
rt2800_bbp_write(rt2x00dev, 22, 0x80);
|
|
usleep_range(100, 200);
|
|
bytevalue = rt2800_bbp_read(rt2x00dev, 49);
|
|
if (bytevalue > 128)
|
|
d1 = bytevalue - 256;
|
|
else
|
|
d1 = (s8)bytevalue;
|
|
rt2800_bbp_write(rt2x00dev, 22, 0x0);
|
|
rt2800_rfcsr_write_bank(rt2x00dev, 0, 35, 0x01);
|
|
|
|
rt2800_bbp_write(rt2x00dev, 22, 0x80);
|
|
usleep_range(100, 200);
|
|
bytevalue = rt2800_bbp_read(rt2x00dev, 49);
|
|
if (bytevalue > 128)
|
|
d2 = bytevalue - 256;
|
|
else
|
|
d2 = (s8)bytevalue;
|
|
rt2800_bbp_write(rt2x00dev, 22, 0x0);
|
|
|
|
rcalcode = rt2800_calcrcalibrationcode(rt2x00dev, d1, d2);
|
|
if (rcalcode < 0)
|
|
r_cal_code = 256 + rcalcode;
|
|
else
|
|
r_cal_code = (u8)rcalcode;
|
|
|
|
rt2800_rfcsr_write_bank(rt2x00dev, 0, 7, r_cal_code);
|
|
|
|
rt2800_bbp_write(rt2x00dev, 22, 0x0);
|
|
|
|
bytevalue = rt2800_bbp_read(rt2x00dev, 21);
|
|
bytevalue |= 0x1;
|
|
rt2800_bbp_write(rt2x00dev, 21, bytevalue);
|
|
bytevalue = rt2800_bbp_read(rt2x00dev, 21);
|
|
bytevalue &= (~0x1);
|
|
rt2800_bbp_write(rt2x00dev, 21, bytevalue);
|
|
|
|
rt2800_rfcsr_write_bank(rt2x00dev, 0, 1, saverfb0r1);
|
|
rt2800_rfcsr_write_bank(rt2x00dev, 0, 34, saverfb0r34);
|
|
rt2800_rfcsr_write_bank(rt2x00dev, 0, 35, saverfb0r35);
|
|
rt2800_rfcsr_write_bank(rt2x00dev, 5, 4, saverfb5r4);
|
|
rt2800_rfcsr_write_bank(rt2x00dev, 5, 17, saverfb5r17);
|
|
rt2800_rfcsr_write_bank(rt2x00dev, 5, 18, saverfb5r18);
|
|
rt2800_rfcsr_write_bank(rt2x00dev, 5, 19, saverfb5r19);
|
|
rt2800_rfcsr_write_bank(rt2x00dev, 5, 20, saverfb5r20);
|
|
|
|
rt2800_bbp_write(rt2x00dev, 22, savebbpr22);
|
|
rt2800_bbp_write(rt2x00dev, 47, savebbpr47);
|
|
rt2800_bbp_write(rt2x00dev, 49, savebbpr49);
|
|
|
|
rt2800_register_write(rt2x00dev, RF_BYPASS0, MAC_RF_BYPASS0);
|
|
rt2800_register_write(rt2x00dev, RF_CONTROL0, MAC_RF_CONTROL0);
|
|
|
|
rt2800_register_write(rt2x00dev, MAC_SYS_CTRL, savemacsysctrl);
|
|
rt2800_register_write(rt2x00dev, PWR_PIN_CFG, MAC_PWR_PIN_CFG);
|
|
}
|
|
|
|
static void rt2800_rxdcoc_calibration(struct rt2x00_dev *rt2x00dev)
|
|
{
|
|
u8 bbpreg = 0;
|
|
u32 macvalue = 0;
|
|
u8 saverfb0r2, saverfb5r4, saverfb7r4, rfvalue;
|
|
int i;
|
|
|
|
saverfb0r2 = rt2800_rfcsr_read_bank(rt2x00dev, 0, 2);
|
|
rfvalue = saverfb0r2;
|
|
rfvalue |= 0x03;
|
|
rt2800_rfcsr_write_bank(rt2x00dev, 0, 2, rfvalue);
|
|
|
|
rt2800_bbp_write(rt2x00dev, 158, 141);
|
|
bbpreg = rt2800_bbp_read(rt2x00dev, 159);
|
|
bbpreg |= 0x10;
|
|
rt2800_bbp_write(rt2x00dev, 159, bbpreg);
|
|
|
|
macvalue = rt2800_register_read(rt2x00dev, MAC_SYS_CTRL);
|
|
rt2800_register_write(rt2x00dev, MAC_SYS_CTRL, 0x8);
|
|
|
|
if (unlikely(rt2800_wait_bbp_rf_ready(rt2x00dev, MAC_STATUS_CFG_BBP_RF_BUSY_TX)))
|
|
rt2x00_warn(rt2x00dev, "RF TX busy in RX RXDCOC calibration\n");
|
|
|
|
saverfb5r4 = rt2800_rfcsr_read_bank(rt2x00dev, 5, 4);
|
|
saverfb7r4 = rt2800_rfcsr_read_bank(rt2x00dev, 7, 4);
|
|
saverfb5r4 = saverfb5r4 & (~0x40);
|
|
saverfb7r4 = saverfb7r4 & (~0x40);
|
|
rt2800_rfcsr_write_dccal(rt2x00dev, 4, 0x64);
|
|
rt2800_rfcsr_write_bank(rt2x00dev, 5, 4, saverfb5r4);
|
|
rt2800_rfcsr_write_bank(rt2x00dev, 7, 4, saverfb7r4);
|
|
|
|
rt2800_bbp_write(rt2x00dev, 158, 141);
|
|
bbpreg = rt2800_bbp_read(rt2x00dev, 159);
|
|
bbpreg = bbpreg & (~0x40);
|
|
rt2800_bbp_write(rt2x00dev, 159, bbpreg);
|
|
bbpreg |= 0x48;
|
|
rt2800_bbp_write(rt2x00dev, 159, bbpreg);
|
|
|
|
for (i = 0; i < 10000; i++) {
|
|
bbpreg = rt2800_bbp_read(rt2x00dev, 159);
|
|
if ((bbpreg & 0x40) == 0)
|
|
break;
|
|
usleep_range(50, 100);
|
|
}
|
|
|
|
bbpreg = rt2800_bbp_read(rt2x00dev, 159);
|
|
bbpreg = bbpreg & (~0x40);
|
|
rt2800_bbp_write(rt2x00dev, 159, bbpreg);
|
|
|
|
rt2800_register_write(rt2x00dev, MAC_SYS_CTRL, macvalue);
|
|
|
|
rt2800_bbp_write(rt2x00dev, 158, 141);
|
|
bbpreg = rt2800_bbp_read(rt2x00dev, 159);
|
|
bbpreg &= (~0x10);
|
|
rt2800_bbp_write(rt2x00dev, 159, bbpreg);
|
|
|
|
rt2800_rfcsr_write_bank(rt2x00dev, 0, 2, saverfb0r2);
|
|
}
|
|
|
|
static u32 rt2800_do_sqrt_accumulation(u32 si)
|
|
{
|
|
u32 root, root_pre, bit;
|
|
s8 i;
|
|
|
|
bit = 1 << 15;
|
|
root = 0;
|
|
for (i = 15; i >= 0; i = i - 1) {
|
|
root_pre = root + bit;
|
|
if ((root_pre * root_pre) <= si)
|
|
root = root_pre;
|
|
bit = bit >> 1;
|
|
}
|
|
|
|
return root;
|
|
}
|
|
|
|
static void rt2800_rxiq_calibration(struct rt2x00_dev *rt2x00dev)
|
|
{
|
|
u8 rfb0r1, rfb0r2, rfb0r42;
|
|
u8 rfb4r0, rfb4r19;
|
|
u8 rfb5r3, rfb5r4, rfb5r17, rfb5r18, rfb5r19, rfb5r20;
|
|
u8 rfb6r0, rfb6r19;
|
|
u8 rfb7r3, rfb7r4, rfb7r17, rfb7r18, rfb7r19, rfb7r20;
|
|
|
|
u8 bbp1, bbp4;
|
|
u8 bbpr241, bbpr242;
|
|
u32 i;
|
|
u8 ch_idx;
|
|
u8 bbpval;
|
|
u8 rfval, vga_idx = 0;
|
|
int mi = 0, mq = 0, si = 0, sq = 0, riq = 0;
|
|
int sigma_i, sigma_q, r_iq, g_rx;
|
|
int g_imb;
|
|
int ph_rx;
|
|
u32 savemacsysctrl = 0;
|
|
u32 orig_RF_CONTROL0 = 0;
|
|
u32 orig_RF_BYPASS0 = 0;
|
|
u32 orig_RF_CONTROL1 = 0;
|
|
u32 orig_RF_BYPASS1 = 0;
|
|
u32 orig_RF_CONTROL3 = 0;
|
|
u32 orig_RF_BYPASS3 = 0;
|
|
u32 bbpval1 = 0;
|
|
static const u8 rf_vga_table[] = {0x20, 0x21, 0x22, 0x38, 0x39, 0x3a, 0x3b, 0x3c, 0x3d, 0x3e, 0x3f};
|
|
|
|
savemacsysctrl = rt2800_register_read(rt2x00dev, MAC_SYS_CTRL);
|
|
orig_RF_CONTROL0 = rt2800_register_read(rt2x00dev, RF_CONTROL0);
|
|
orig_RF_BYPASS0 = rt2800_register_read(rt2x00dev, RF_BYPASS0);
|
|
orig_RF_CONTROL1 = rt2800_register_read(rt2x00dev, RF_CONTROL1);
|
|
orig_RF_BYPASS1 = rt2800_register_read(rt2x00dev, RF_BYPASS1);
|
|
orig_RF_CONTROL3 = rt2800_register_read(rt2x00dev, RF_CONTROL3);
|
|
orig_RF_BYPASS3 = rt2800_register_read(rt2x00dev, RF_BYPASS3);
|
|
|
|
bbp1 = rt2800_bbp_read(rt2x00dev, 1);
|
|
bbp4 = rt2800_bbp_read(rt2x00dev, 4);
|
|
|
|
rt2800_register_write(rt2x00dev, MAC_SYS_CTRL, 0x0);
|
|
|
|
if (unlikely(rt2800_wait_bbp_rf_ready(rt2x00dev, MAC_STATUS_CFG_BBP_RF_BUSY)))
|
|
rt2x00_warn(rt2x00dev, "Timeout waiting for MAC status in RXIQ calibration\n");
|
|
|
|
bbpval = bbp4 & (~0x18);
|
|
bbpval = bbp4 | 0x00;
|
|
rt2800_bbp_write(rt2x00dev, 4, bbpval);
|
|
|
|
bbpval = rt2800_bbp_read(rt2x00dev, 21);
|
|
bbpval = bbpval | 1;
|
|
rt2800_bbp_write(rt2x00dev, 21, bbpval);
|
|
bbpval = bbpval & 0xfe;
|
|
rt2800_bbp_write(rt2x00dev, 21, bbpval);
|
|
|
|
rt2800_register_write(rt2x00dev, RF_CONTROL1, 0x00000202);
|
|
rt2800_register_write(rt2x00dev, RF_BYPASS1, 0x00000303);
|
|
if (test_bit(CAPABILITY_EXTERNAL_PA_TX0, &rt2x00dev->cap_flags))
|
|
rt2800_register_write(rt2x00dev, RF_CONTROL3, 0x0101);
|
|
else
|
|
rt2800_register_write(rt2x00dev, RF_CONTROL3, 0x0000);
|
|
|
|
rt2800_register_write(rt2x00dev, RF_BYPASS3, 0xf1f1);
|
|
|
|
rfb0r1 = rt2800_rfcsr_read_bank(rt2x00dev, 0, 1);
|
|
rfb0r2 = rt2800_rfcsr_read_bank(rt2x00dev, 0, 2);
|
|
rfb0r42 = rt2800_rfcsr_read_bank(rt2x00dev, 0, 42);
|
|
rfb4r0 = rt2800_rfcsr_read_bank(rt2x00dev, 4, 0);
|
|
rfb4r19 = rt2800_rfcsr_read_bank(rt2x00dev, 4, 19);
|
|
rfb5r3 = rt2800_rfcsr_read_bank(rt2x00dev, 5, 3);
|
|
rfb5r4 = rt2800_rfcsr_read_bank(rt2x00dev, 5, 4);
|
|
rfb5r17 = rt2800_rfcsr_read_bank(rt2x00dev, 5, 17);
|
|
rfb5r18 = rt2800_rfcsr_read_bank(rt2x00dev, 5, 18);
|
|
rfb5r19 = rt2800_rfcsr_read_bank(rt2x00dev, 5, 19);
|
|
rfb5r20 = rt2800_rfcsr_read_bank(rt2x00dev, 5, 20);
|
|
|
|
rfb6r0 = rt2800_rfcsr_read_bank(rt2x00dev, 6, 0);
|
|
rfb6r19 = rt2800_rfcsr_read_bank(rt2x00dev, 6, 19);
|
|
rfb7r3 = rt2800_rfcsr_read_bank(rt2x00dev, 7, 3);
|
|
rfb7r4 = rt2800_rfcsr_read_bank(rt2x00dev, 7, 4);
|
|
rfb7r17 = rt2800_rfcsr_read_bank(rt2x00dev, 7, 17);
|
|
rfb7r18 = rt2800_rfcsr_read_bank(rt2x00dev, 7, 18);
|
|
rfb7r19 = rt2800_rfcsr_read_bank(rt2x00dev, 7, 19);
|
|
rfb7r20 = rt2800_rfcsr_read_bank(rt2x00dev, 7, 20);
|
|
|
|
rt2800_rfcsr_write_chanreg(rt2x00dev, 0, 0x87);
|
|
rt2800_rfcsr_write_chanreg(rt2x00dev, 19, 0x27);
|
|
rt2800_rfcsr_write_dccal(rt2x00dev, 3, 0x38);
|
|
rt2800_rfcsr_write_dccal(rt2x00dev, 4, 0x38);
|
|
rt2800_rfcsr_write_dccal(rt2x00dev, 17, 0x80);
|
|
rt2800_rfcsr_write_dccal(rt2x00dev, 18, 0xC1);
|
|
rt2800_rfcsr_write_dccal(rt2x00dev, 19, 0x60);
|
|
rt2800_rfcsr_write_dccal(rt2x00dev, 20, 0x00);
|
|
|
|
rt2800_bbp_write(rt2x00dev, 23, 0x0);
|
|
rt2800_bbp_write(rt2x00dev, 24, 0x0);
|
|
|
|
rt2800_bbp_dcoc_write(rt2x00dev, 5, 0x0);
|
|
|
|
bbpr241 = rt2800_bbp_read(rt2x00dev, 241);
|
|
bbpr242 = rt2800_bbp_read(rt2x00dev, 242);
|
|
|
|
rt2800_bbp_write(rt2x00dev, 241, 0x10);
|
|
rt2800_bbp_write(rt2x00dev, 242, 0x84);
|
|
rt2800_bbp_write(rt2x00dev, 244, 0x31);
|
|
|
|
bbpval = rt2800_bbp_dcoc_read(rt2x00dev, 3);
|
|
bbpval = bbpval & (~0x7);
|
|
rt2800_bbp_dcoc_write(rt2x00dev, 3, bbpval);
|
|
|
|
rt2800_register_write(rt2x00dev, RF_CONTROL0, 0x00000004);
|
|
udelay(1);
|
|
rt2800_register_write(rt2x00dev, RF_CONTROL0, 0x00000006);
|
|
usleep_range(1, 200);
|
|
rt2800_register_write(rt2x00dev, RF_BYPASS0, 0x00003376);
|
|
rt2800_register_write(rt2x00dev, RF_CONTROL0, 0x00001006);
|
|
udelay(1);
|
|
if (test_bit(CAPABILITY_EXTERNAL_PA_TX0, &rt2x00dev->cap_flags)) {
|
|
rt2800_bbp_write(rt2x00dev, 23, 0x06);
|
|
rt2800_bbp_write(rt2x00dev, 24, 0x06);
|
|
} else {
|
|
rt2800_bbp_write(rt2x00dev, 23, 0x02);
|
|
rt2800_bbp_write(rt2x00dev, 24, 0x02);
|
|
}
|
|
|
|
for (ch_idx = 0; ch_idx < 2; ch_idx = ch_idx + 1) {
|
|
if (ch_idx == 0) {
|
|
rfval = rfb0r1 & (~0x3);
|
|
rfval = rfb0r1 | 0x1;
|
|
rt2800_rfcsr_write_bank(rt2x00dev, 0, 1, rfval);
|
|
rfval = rfb0r2 & (~0x33);
|
|
rfval = rfb0r2 | 0x11;
|
|
rt2800_rfcsr_write_bank(rt2x00dev, 0, 2, rfval);
|
|
rfval = rfb0r42 & (~0x50);
|
|
rfval = rfb0r42 | 0x10;
|
|
rt2800_rfcsr_write_bank(rt2x00dev, 0, 42, rfval);
|
|
|
|
rt2800_register_write(rt2x00dev, RF_CONTROL0, 0x00001006);
|
|
udelay(1);
|
|
|
|
bbpval = bbp1 & (~0x18);
|
|
bbpval = bbpval | 0x00;
|
|
rt2800_bbp_write(rt2x00dev, 1, bbpval);
|
|
|
|
rt2800_bbp_dcoc_write(rt2x00dev, 1, 0x00);
|
|
} else {
|
|
rfval = rfb0r1 & (~0x3);
|
|
rfval = rfb0r1 | 0x2;
|
|
rt2800_rfcsr_write_bank(rt2x00dev, 0, 1, rfval);
|
|
rfval = rfb0r2 & (~0x33);
|
|
rfval = rfb0r2 | 0x22;
|
|
rt2800_rfcsr_write_bank(rt2x00dev, 0, 2, rfval);
|
|
rfval = rfb0r42 & (~0x50);
|
|
rfval = rfb0r42 | 0x40;
|
|
rt2800_rfcsr_write_bank(rt2x00dev, 0, 42, rfval);
|
|
|
|
rt2800_register_write(rt2x00dev, RF_CONTROL0, 0x00002006);
|
|
udelay(1);
|
|
|
|
bbpval = bbp1 & (~0x18);
|
|
bbpval = bbpval | 0x08;
|
|
rt2800_bbp_write(rt2x00dev, 1, bbpval);
|
|
|
|
rt2800_bbp_dcoc_write(rt2x00dev, 1, 0x01);
|
|
}
|
|
usleep_range(500, 1500);
|
|
|
|
vga_idx = 0;
|
|
while (vga_idx < 11) {
|
|
rt2800_rfcsr_write_dccal(rt2x00dev, 3, rf_vga_table[vga_idx]);
|
|
rt2800_rfcsr_write_dccal(rt2x00dev, 4, rf_vga_table[vga_idx]);
|
|
|
|
rt2800_bbp_dcoc_write(rt2x00dev, 0, 0x93);
|
|
|
|
for (i = 0; i < 10000; i++) {
|
|
bbpval = rt2800_bbp_read(rt2x00dev, 159);
|
|
if ((bbpval & 0xff) == 0x93)
|
|
usleep_range(50, 100);
|
|
else
|
|
break;
|
|
}
|
|
|
|
if ((bbpval & 0xff) == 0x93) {
|
|
rt2x00_warn(rt2x00dev, "Fatal Error: Calibration doesn't finish");
|
|
goto restore_value;
|
|
}
|
|
for (i = 0; i < 5; i++) {
|
|
u32 bbptemp = 0;
|
|
u8 value = 0;
|
|
int result = 0;
|
|
|
|
rt2800_bbp_write(rt2x00dev, 158, 0x1e);
|
|
rt2800_bbp_write(rt2x00dev, 159, i);
|
|
rt2800_bbp_write(rt2x00dev, 158, 0x22);
|
|
value = rt2800_bbp_read(rt2x00dev, 159);
|
|
bbptemp = bbptemp + (value << 24);
|
|
rt2800_bbp_write(rt2x00dev, 158, 0x21);
|
|
value = rt2800_bbp_read(rt2x00dev, 159);
|
|
bbptemp = bbptemp + (value << 16);
|
|
rt2800_bbp_write(rt2x00dev, 158, 0x20);
|
|
value = rt2800_bbp_read(rt2x00dev, 159);
|
|
bbptemp = bbptemp + (value << 8);
|
|
rt2800_bbp_write(rt2x00dev, 158, 0x1f);
|
|
value = rt2800_bbp_read(rt2x00dev, 159);
|
|
bbptemp = bbptemp + value;
|
|
|
|
if (i < 2 && (bbptemp & 0x800000))
|
|
result = (bbptemp & 0xffffff) - 0x1000000;
|
|
else if (i == 4)
|
|
result = bbptemp;
|
|
else
|
|
result = bbptemp;
|
|
|
|
if (i == 0)
|
|
mi = result / 4096;
|
|
else if (i == 1)
|
|
mq = result / 4096;
|
|
else if (i == 2)
|
|
si = bbptemp / 4096;
|
|
else if (i == 3)
|
|
sq = bbptemp / 4096;
|
|
else
|
|
riq = result / 4096;
|
|
}
|
|
|
|
bbpval1 = si - mi * mi;
|
|
rt2x00_dbg(rt2x00dev,
|
|
"RXIQ si=%d, sq=%d, riq=%d, bbpval %d, vga_idx %d",
|
|
si, sq, riq, bbpval1, vga_idx);
|
|
|
|
if (bbpval1 >= (100 * 100))
|
|
break;
|
|
|
|
if (bbpval1 <= 100)
|
|
vga_idx = vga_idx + 9;
|
|
else if (bbpval1 <= 158)
|
|
vga_idx = vga_idx + 8;
|
|
else if (bbpval1 <= 251)
|
|
vga_idx = vga_idx + 7;
|
|
else if (bbpval1 <= 398)
|
|
vga_idx = vga_idx + 6;
|
|
else if (bbpval1 <= 630)
|
|
vga_idx = vga_idx + 5;
|
|
else if (bbpval1 <= 1000)
|
|
vga_idx = vga_idx + 4;
|
|
else if (bbpval1 <= 1584)
|
|
vga_idx = vga_idx + 3;
|
|
else if (bbpval1 <= 2511)
|
|
vga_idx = vga_idx + 2;
|
|
else
|
|
vga_idx = vga_idx + 1;
|
|
}
|
|
|
|
sigma_i = rt2800_do_sqrt_accumulation(100 * (si - mi * mi));
|
|
sigma_q = rt2800_do_sqrt_accumulation(100 * (sq - mq * mq));
|
|
r_iq = 10 * (riq - (mi * mq));
|
|
|
|
rt2x00_dbg(rt2x00dev, "Sigma_i=%d, Sigma_q=%d, R_iq=%d", sigma_i, sigma_q, r_iq);
|
|
|
|
if (sigma_i <= 1400 && sigma_i >= 1000 &&
|
|
(sigma_i - sigma_q) <= 112 &&
|
|
(sigma_i - sigma_q) >= -112 &&
|
|
mi <= 32 && mi >= -32 &&
|
|
mq <= 32 && mq >= -32) {
|
|
r_iq = 10 * (riq - (mi * mq));
|
|
rt2x00_dbg(rt2x00dev, "RXIQ Sigma_i=%d, Sigma_q=%d, R_iq=%d\n",
|
|
sigma_i, sigma_q, r_iq);
|
|
|
|
g_rx = (1000 * sigma_q) / sigma_i;
|
|
g_imb = ((-2) * 128 * (1000 - g_rx)) / (1000 + g_rx);
|
|
ph_rx = (r_iq * 2292) / (sigma_i * sigma_q);
|
|
|
|
if (ph_rx > 20 || ph_rx < -20) {
|
|
ph_rx = 0;
|
|
rt2x00_warn(rt2x00dev, "RXIQ calibration FAIL");
|
|
}
|
|
|
|
if (g_imb > 12 || g_imb < -12) {
|
|
g_imb = 0;
|
|
rt2x00_warn(rt2x00dev, "RXIQ calibration FAIL");
|
|
}
|
|
} else {
|
|
g_imb = 0;
|
|
ph_rx = 0;
|
|
rt2x00_dbg(rt2x00dev, "RXIQ Sigma_i=%d, Sigma_q=%d, R_iq=%d\n",
|
|
sigma_i, sigma_q, r_iq);
|
|
rt2x00_warn(rt2x00dev, "RXIQ calibration FAIL");
|
|
}
|
|
|
|
if (ch_idx == 0) {
|
|
rt2800_bbp_write(rt2x00dev, 158, 0x37);
|
|
rt2800_bbp_write(rt2x00dev, 159, g_imb & 0x3f);
|
|
rt2800_bbp_write(rt2x00dev, 158, 0x35);
|
|
rt2800_bbp_write(rt2x00dev, 159, ph_rx & 0x3f);
|
|
} else {
|
|
rt2800_bbp_write(rt2x00dev, 158, 0x55);
|
|
rt2800_bbp_write(rt2x00dev, 159, g_imb & 0x3f);
|
|
rt2800_bbp_write(rt2x00dev, 158, 0x53);
|
|
rt2800_bbp_write(rt2x00dev, 159, ph_rx & 0x3f);
|
|
}
|
|
}
|
|
|
|
restore_value:
|
|
rt2800_bbp_write(rt2x00dev, 158, 0x3);
|
|
bbpval = rt2800_bbp_read(rt2x00dev, 159);
|
|
rt2800_bbp_write(rt2x00dev, 159, (bbpval | 0x07));
|
|
|
|
rt2800_bbp_write(rt2x00dev, 158, 0x00);
|
|
rt2800_bbp_write(rt2x00dev, 159, 0x00);
|
|
rt2800_bbp_write(rt2x00dev, 1, bbp1);
|
|
rt2800_bbp_write(rt2x00dev, 4, bbp4);
|
|
rt2800_bbp_write(rt2x00dev, 241, bbpr241);
|
|
rt2800_bbp_write(rt2x00dev, 242, bbpr242);
|
|
|
|
rt2800_bbp_write(rt2x00dev, 244, 0x00);
|
|
bbpval = rt2800_bbp_read(rt2x00dev, 21);
|
|
bbpval |= 0x1;
|
|
rt2800_bbp_write(rt2x00dev, 21, bbpval);
|
|
usleep_range(10, 200);
|
|
bbpval &= 0xfe;
|
|
rt2800_bbp_write(rt2x00dev, 21, bbpval);
|
|
|
|
rt2800_rfcsr_write_bank(rt2x00dev, 0, 1, rfb0r1);
|
|
rt2800_rfcsr_write_bank(rt2x00dev, 0, 2, rfb0r2);
|
|
rt2800_rfcsr_write_bank(rt2x00dev, 0, 42, rfb0r42);
|
|
|
|
rt2800_rfcsr_write_bank(rt2x00dev, 4, 0, rfb4r0);
|
|
rt2800_rfcsr_write_bank(rt2x00dev, 4, 19, rfb4r19);
|
|
rt2800_rfcsr_write_bank(rt2x00dev, 5, 3, rfb5r3);
|
|
rt2800_rfcsr_write_bank(rt2x00dev, 5, 4, rfb5r4);
|
|
rt2800_rfcsr_write_bank(rt2x00dev, 5, 17, rfb5r17);
|
|
rt2800_rfcsr_write_bank(rt2x00dev, 5, 18, rfb5r18);
|
|
rt2800_rfcsr_write_bank(rt2x00dev, 5, 19, rfb5r19);
|
|
rt2800_rfcsr_write_bank(rt2x00dev, 5, 20, rfb5r20);
|
|
|
|
rt2800_rfcsr_write_bank(rt2x00dev, 6, 0, rfb6r0);
|
|
rt2800_rfcsr_write_bank(rt2x00dev, 6, 19, rfb6r19);
|
|
rt2800_rfcsr_write_bank(rt2x00dev, 7, 3, rfb7r3);
|
|
rt2800_rfcsr_write_bank(rt2x00dev, 7, 4, rfb7r4);
|
|
rt2800_rfcsr_write_bank(rt2x00dev, 7, 17, rfb7r17);
|
|
rt2800_rfcsr_write_bank(rt2x00dev, 7, 18, rfb7r18);
|
|
rt2800_rfcsr_write_bank(rt2x00dev, 7, 19, rfb7r19);
|
|
rt2800_rfcsr_write_bank(rt2x00dev, 7, 20, rfb7r20);
|
|
|
|
rt2800_register_write(rt2x00dev, RF_CONTROL0, 0x00000006);
|
|
udelay(1);
|
|
rt2800_register_write(rt2x00dev, RF_CONTROL0, 0x00000004);
|
|
udelay(1);
|
|
rt2800_register_write(rt2x00dev, RF_CONTROL0, orig_RF_CONTROL0);
|
|
udelay(1);
|
|
rt2800_register_write(rt2x00dev, RF_BYPASS0, orig_RF_BYPASS0);
|
|
rt2800_register_write(rt2x00dev, RF_CONTROL1, orig_RF_CONTROL1);
|
|
rt2800_register_write(rt2x00dev, RF_BYPASS1, orig_RF_BYPASS1);
|
|
rt2800_register_write(rt2x00dev, RF_CONTROL3, orig_RF_CONTROL3);
|
|
rt2800_register_write(rt2x00dev, RF_BYPASS3, orig_RF_BYPASS3);
|
|
rt2800_register_write(rt2x00dev, MAC_SYS_CTRL, savemacsysctrl);
|
|
}
|
|
|
|
static void rt2800_rf_configstore(struct rt2x00_dev *rt2x00dev,
|
|
struct rf_reg_pair rf_reg_record[][13], u8 chain)
|
|
{
|
|
u8 rfvalue = 0;
|
|
|
|
if (chain == CHAIN_0) {
|
|
rfvalue = rt2800_rfcsr_read_bank(rt2x00dev, 0, 1);
|
|
rf_reg_record[CHAIN_0][0].bank = 0;
|
|
rf_reg_record[CHAIN_0][0].reg = 1;
|
|
rf_reg_record[CHAIN_0][0].value = rfvalue;
|
|
rfvalue = rt2800_rfcsr_read_bank(rt2x00dev, 0, 2);
|
|
rf_reg_record[CHAIN_0][1].bank = 0;
|
|
rf_reg_record[CHAIN_0][1].reg = 2;
|
|
rf_reg_record[CHAIN_0][1].value = rfvalue;
|
|
rfvalue = rt2800_rfcsr_read_bank(rt2x00dev, 0, 35);
|
|
rf_reg_record[CHAIN_0][2].bank = 0;
|
|
rf_reg_record[CHAIN_0][2].reg = 35;
|
|
rf_reg_record[CHAIN_0][2].value = rfvalue;
|
|
rfvalue = rt2800_rfcsr_read_bank(rt2x00dev, 0, 42);
|
|
rf_reg_record[CHAIN_0][3].bank = 0;
|
|
rf_reg_record[CHAIN_0][3].reg = 42;
|
|
rf_reg_record[CHAIN_0][3].value = rfvalue;
|
|
rfvalue = rt2800_rfcsr_read_bank(rt2x00dev, 4, 0);
|
|
rf_reg_record[CHAIN_0][4].bank = 4;
|
|
rf_reg_record[CHAIN_0][4].reg = 0;
|
|
rf_reg_record[CHAIN_0][4].value = rfvalue;
|
|
rfvalue = rt2800_rfcsr_read_bank(rt2x00dev, 4, 2);
|
|
rf_reg_record[CHAIN_0][5].bank = 4;
|
|
rf_reg_record[CHAIN_0][5].reg = 2;
|
|
rf_reg_record[CHAIN_0][5].value = rfvalue;
|
|
rfvalue = rt2800_rfcsr_read_bank(rt2x00dev, 4, 34);
|
|
rf_reg_record[CHAIN_0][6].bank = 4;
|
|
rf_reg_record[CHAIN_0][6].reg = 34;
|
|
rf_reg_record[CHAIN_0][6].value = rfvalue;
|
|
rfvalue = rt2800_rfcsr_read_bank(rt2x00dev, 5, 3);
|
|
rf_reg_record[CHAIN_0][7].bank = 5;
|
|
rf_reg_record[CHAIN_0][7].reg = 3;
|
|
rf_reg_record[CHAIN_0][7].value = rfvalue;
|
|
rfvalue = rt2800_rfcsr_read_bank(rt2x00dev, 5, 4);
|
|
rf_reg_record[CHAIN_0][8].bank = 5;
|
|
rf_reg_record[CHAIN_0][8].reg = 4;
|
|
rf_reg_record[CHAIN_0][8].value = rfvalue;
|
|
rfvalue = rt2800_rfcsr_read_bank(rt2x00dev, 5, 17);
|
|
rf_reg_record[CHAIN_0][9].bank = 5;
|
|
rf_reg_record[CHAIN_0][9].reg = 17;
|
|
rf_reg_record[CHAIN_0][9].value = rfvalue;
|
|
rfvalue = rt2800_rfcsr_read_bank(rt2x00dev, 5, 18);
|
|
rf_reg_record[CHAIN_0][10].bank = 5;
|
|
rf_reg_record[CHAIN_0][10].reg = 18;
|
|
rf_reg_record[CHAIN_0][10].value = rfvalue;
|
|
rfvalue = rt2800_rfcsr_read_bank(rt2x00dev, 5, 19);
|
|
rf_reg_record[CHAIN_0][11].bank = 5;
|
|
rf_reg_record[CHAIN_0][11].reg = 19;
|
|
rf_reg_record[CHAIN_0][11].value = rfvalue;
|
|
rfvalue = rt2800_rfcsr_read_bank(rt2x00dev, 5, 20);
|
|
rf_reg_record[CHAIN_0][12].bank = 5;
|
|
rf_reg_record[CHAIN_0][12].reg = 20;
|
|
rf_reg_record[CHAIN_0][12].value = rfvalue;
|
|
} else if (chain == CHAIN_1) {
|
|
rfvalue = rt2800_rfcsr_read_bank(rt2x00dev, 0, 1);
|
|
rf_reg_record[CHAIN_1][0].bank = 0;
|
|
rf_reg_record[CHAIN_1][0].reg = 1;
|
|
rf_reg_record[CHAIN_1][0].value = rfvalue;
|
|
rfvalue = rt2800_rfcsr_read_bank(rt2x00dev, 0, 2);
|
|
rf_reg_record[CHAIN_1][1].bank = 0;
|
|
rf_reg_record[CHAIN_1][1].reg = 2;
|
|
rf_reg_record[CHAIN_1][1].value = rfvalue;
|
|
rfvalue = rt2800_rfcsr_read_bank(rt2x00dev, 0, 35);
|
|
rf_reg_record[CHAIN_1][2].bank = 0;
|
|
rf_reg_record[CHAIN_1][2].reg = 35;
|
|
rf_reg_record[CHAIN_1][2].value = rfvalue;
|
|
rfvalue = rt2800_rfcsr_read_bank(rt2x00dev, 0, 42);
|
|
rf_reg_record[CHAIN_1][3].bank = 0;
|
|
rf_reg_record[CHAIN_1][3].reg = 42;
|
|
rf_reg_record[CHAIN_1][3].value = rfvalue;
|
|
rfvalue = rt2800_rfcsr_read_bank(rt2x00dev, 6, 0);
|
|
rf_reg_record[CHAIN_1][4].bank = 6;
|
|
rf_reg_record[CHAIN_1][4].reg = 0;
|
|
rf_reg_record[CHAIN_1][4].value = rfvalue;
|
|
rfvalue = rt2800_rfcsr_read_bank(rt2x00dev, 6, 2);
|
|
rf_reg_record[CHAIN_1][5].bank = 6;
|
|
rf_reg_record[CHAIN_1][5].reg = 2;
|
|
rf_reg_record[CHAIN_1][5].value = rfvalue;
|
|
rfvalue = rt2800_rfcsr_read_bank(rt2x00dev, 6, 34);
|
|
rf_reg_record[CHAIN_1][6].bank = 6;
|
|
rf_reg_record[CHAIN_1][6].reg = 34;
|
|
rf_reg_record[CHAIN_1][6].value = rfvalue;
|
|
rfvalue = rt2800_rfcsr_read_bank(rt2x00dev, 7, 3);
|
|
rf_reg_record[CHAIN_1][7].bank = 7;
|
|
rf_reg_record[CHAIN_1][7].reg = 3;
|
|
rf_reg_record[CHAIN_1][7].value = rfvalue;
|
|
rfvalue = rt2800_rfcsr_read_bank(rt2x00dev, 7, 4);
|
|
rf_reg_record[CHAIN_1][8].bank = 7;
|
|
rf_reg_record[CHAIN_1][8].reg = 4;
|
|
rf_reg_record[CHAIN_1][8].value = rfvalue;
|
|
rfvalue = rt2800_rfcsr_read_bank(rt2x00dev, 7, 17);
|
|
rf_reg_record[CHAIN_1][9].bank = 7;
|
|
rf_reg_record[CHAIN_1][9].reg = 17;
|
|
rf_reg_record[CHAIN_1][9].value = rfvalue;
|
|
rfvalue = rt2800_rfcsr_read_bank(rt2x00dev, 7, 18);
|
|
rf_reg_record[CHAIN_1][10].bank = 7;
|
|
rf_reg_record[CHAIN_1][10].reg = 18;
|
|
rf_reg_record[CHAIN_1][10].value = rfvalue;
|
|
rfvalue = rt2800_rfcsr_read_bank(rt2x00dev, 7, 19);
|
|
rf_reg_record[CHAIN_1][11].bank = 7;
|
|
rf_reg_record[CHAIN_1][11].reg = 19;
|
|
rf_reg_record[CHAIN_1][11].value = rfvalue;
|
|
rfvalue = rt2800_rfcsr_read_bank(rt2x00dev, 7, 20);
|
|
rf_reg_record[CHAIN_1][12].bank = 7;
|
|
rf_reg_record[CHAIN_1][12].reg = 20;
|
|
rf_reg_record[CHAIN_1][12].value = rfvalue;
|
|
} else {
|
|
rt2x00_warn(rt2x00dev, "Unknown chain = %u\n", chain);
|
|
}
|
|
}
|
|
|
|
static void rt2800_rf_configrecover(struct rt2x00_dev *rt2x00dev,
|
|
struct rf_reg_pair rf_record[][13])
|
|
{
|
|
u8 chain_index = 0, record_index = 0;
|
|
u8 bank = 0, rf_register = 0, value = 0;
|
|
|
|
for (chain_index = 0; chain_index < 2; chain_index++) {
|
|
for (record_index = 0; record_index < 13; record_index++) {
|
|
bank = rf_record[chain_index][record_index].bank;
|
|
rf_register = rf_record[chain_index][record_index].reg;
|
|
value = rf_record[chain_index][record_index].value;
|
|
rt2800_rfcsr_write_bank(rt2x00dev, bank, rf_register, value);
|
|
rt2x00_dbg(rt2x00dev, "bank: %d, rf_register: %d, value: %x\n",
|
|
bank, rf_register, value);
|
|
}
|
|
}
|
|
}
|
|
|
|
static void rt2800_setbbptonegenerator(struct rt2x00_dev *rt2x00dev)
|
|
{
|
|
rt2800_bbp_write(rt2x00dev, 158, 0xAA);
|
|
rt2800_bbp_write(rt2x00dev, 159, 0x00);
|
|
|
|
rt2800_bbp_write(rt2x00dev, 158, 0xAB);
|
|
rt2800_bbp_write(rt2x00dev, 159, 0x0A);
|
|
|
|
rt2800_bbp_write(rt2x00dev, 158, 0xAC);
|
|
rt2800_bbp_write(rt2x00dev, 159, 0x3F);
|
|
|
|
rt2800_bbp_write(rt2x00dev, 158, 0xAD);
|
|
rt2800_bbp_write(rt2x00dev, 159, 0x3F);
|
|
|
|
rt2800_bbp_write(rt2x00dev, 244, 0x40);
|
|
}
|
|
|
|
static u32 rt2800_do_fft_accumulation(struct rt2x00_dev *rt2x00dev, u8 tidx, u8 read_neg)
|
|
{
|
|
u32 macvalue = 0;
|
|
int fftout_i = 0, fftout_q = 0;
|
|
u32 ptmp = 0, pint = 0;
|
|
u8 bbp = 0;
|
|
u8 tidxi;
|
|
|
|
rt2800_bbp_write(rt2x00dev, 158, 0x00);
|
|
rt2800_bbp_write(rt2x00dev, 159, 0x9b);
|
|
|
|
bbp = 0x9b;
|
|
|
|
while (bbp == 0x9b) {
|
|
usleep_range(10, 50);
|
|
bbp = rt2800_bbp_read(rt2x00dev, 159);
|
|
bbp = bbp & 0xff;
|
|
}
|
|
|
|
rt2800_bbp_write(rt2x00dev, 158, 0xba);
|
|
rt2800_bbp_write(rt2x00dev, 159, tidx);
|
|
rt2800_bbp_write(rt2x00dev, 159, tidx);
|
|
rt2800_bbp_write(rt2x00dev, 159, tidx);
|
|
|
|
macvalue = rt2800_register_read(rt2x00dev, 0x057C);
|
|
|
|
fftout_i = (macvalue >> 16);
|
|
fftout_i = (fftout_i & 0x8000) ? (fftout_i - 0x10000) : fftout_i;
|
|
fftout_q = (macvalue & 0xffff);
|
|
fftout_q = (fftout_q & 0x8000) ? (fftout_q - 0x10000) : fftout_q;
|
|
ptmp = (fftout_i * fftout_i);
|
|
ptmp = ptmp + (fftout_q * fftout_q);
|
|
pint = ptmp;
|
|
rt2x00_dbg(rt2x00dev, "I = %d, Q = %d, power = %x\n", fftout_i, fftout_q, pint);
|
|
if (read_neg) {
|
|
pint = pint >> 1;
|
|
tidxi = 0x40 - tidx;
|
|
tidxi = tidxi & 0x3f;
|
|
|
|
rt2800_bbp_write(rt2x00dev, 158, 0xba);
|
|
rt2800_bbp_write(rt2x00dev, 159, tidxi);
|
|
rt2800_bbp_write(rt2x00dev, 159, tidxi);
|
|
rt2800_bbp_write(rt2x00dev, 159, tidxi);
|
|
|
|
macvalue = rt2800_register_read(rt2x00dev, 0x057C);
|
|
|
|
fftout_i = (macvalue >> 16);
|
|
fftout_i = (fftout_i & 0x8000) ? (fftout_i - 0x10000) : fftout_i;
|
|
fftout_q = (macvalue & 0xffff);
|
|
fftout_q = (fftout_q & 0x8000) ? (fftout_q - 0x10000) : fftout_q;
|
|
ptmp = (fftout_i * fftout_i);
|
|
ptmp = ptmp + (fftout_q * fftout_q);
|
|
ptmp = ptmp >> 1;
|
|
pint = pint + ptmp;
|
|
}
|
|
|
|
return pint;
|
|
}
|
|
|
|
static u32 rt2800_read_fft_accumulation(struct rt2x00_dev *rt2x00dev, u8 tidx)
|
|
{
|
|
u32 macvalue = 0;
|
|
int fftout_i = 0, fftout_q = 0;
|
|
u32 ptmp = 0, pint = 0;
|
|
|
|
rt2800_bbp_write(rt2x00dev, 158, 0xBA);
|
|
rt2800_bbp_write(rt2x00dev, 159, tidx);
|
|
rt2800_bbp_write(rt2x00dev, 159, tidx);
|
|
rt2800_bbp_write(rt2x00dev, 159, tidx);
|
|
|
|
macvalue = rt2800_register_read(rt2x00dev, 0x057C);
|
|
|
|
fftout_i = (macvalue >> 16);
|
|
fftout_i = (fftout_i & 0x8000) ? (fftout_i - 0x10000) : fftout_i;
|
|
fftout_q = (macvalue & 0xffff);
|
|
fftout_q = (fftout_q & 0x8000) ? (fftout_q - 0x10000) : fftout_q;
|
|
ptmp = (fftout_i * fftout_i);
|
|
ptmp = ptmp + (fftout_q * fftout_q);
|
|
pint = ptmp;
|
|
|
|
return pint;
|
|
}
|
|
|
|
static void rt2800_write_dc(struct rt2x00_dev *rt2x00dev, u8 ch_idx, u8 alc, u8 iorq, u8 dc)
|
|
{
|
|
u8 bbp = 0;
|
|
|
|
rt2800_bbp_write(rt2x00dev, 158, 0xb0);
|
|
bbp = alc | 0x80;
|
|
rt2800_bbp_write(rt2x00dev, 159, bbp);
|
|
|
|
if (ch_idx == 0)
|
|
bbp = (iorq == 0) ? 0xb1 : 0xb2;
|
|
else
|
|
bbp = (iorq == 0) ? 0xb8 : 0xb9;
|
|
|
|
rt2800_bbp_write(rt2x00dev, 158, bbp);
|
|
bbp = dc;
|
|
rt2800_bbp_write(rt2x00dev, 159, bbp);
|
|
}
|
|
|
|
static void rt2800_loft_search(struct rt2x00_dev *rt2x00dev, u8 ch_idx,
|
|
u8 alc_idx, u8 dc_result[][RF_ALC_NUM][2])
|
|
{
|
|
u32 p0 = 0, p1 = 0, pf = 0;
|
|
s8 idx0 = 0, idx1 = 0;
|
|
u8 idxf[] = {0x00, 0x00};
|
|
u8 ibit = 0x20;
|
|
u8 iorq;
|
|
s8 bidx;
|
|
|
|
rt2800_bbp_write(rt2x00dev, 158, 0xb0);
|
|
rt2800_bbp_write(rt2x00dev, 159, 0x80);
|
|
|
|
for (bidx = 5; bidx >= 0; bidx--) {
|
|
for (iorq = 0; iorq <= 1; iorq++) {
|
|
if (idxf[iorq] == 0x20) {
|
|
idx0 = 0x20;
|
|
p0 = pf;
|
|
} else {
|
|
idx0 = idxf[iorq] - ibit;
|
|
idx0 = idx0 & 0x3F;
|
|
rt2800_write_dc(rt2x00dev, ch_idx, 0, iorq, idx0);
|
|
p0 = rt2800_do_fft_accumulation(rt2x00dev, 0x0A, 0);
|
|
}
|
|
|
|
idx1 = idxf[iorq] + (bidx == 5 ? 0 : ibit);
|
|
idx1 = idx1 & 0x3F;
|
|
rt2800_write_dc(rt2x00dev, ch_idx, 0, iorq, idx1);
|
|
p1 = rt2800_do_fft_accumulation(rt2x00dev, 0x0A, 0);
|
|
|
|
rt2x00_dbg(rt2x00dev, "alc=%u, IorQ=%u, idx_final=%2x\n",
|
|
alc_idx, iorq, idxf[iorq]);
|
|
rt2x00_dbg(rt2x00dev, "p0=%x, p1=%x, pf=%x, idx_0=%x, idx_1=%x, ibit=%x\n",
|
|
p0, p1, pf, idx0, idx1, ibit);
|
|
|
|
if (bidx != 5 && pf <= p0 && pf < p1) {
|
|
idxf[iorq] = idxf[iorq];
|
|
} else if (p0 < p1) {
|
|
pf = p0;
|
|
idxf[iorq] = idx0 & 0x3F;
|
|
} else {
|
|
pf = p1;
|
|
idxf[iorq] = idx1 & 0x3F;
|
|
}
|
|
rt2x00_dbg(rt2x00dev, "IorQ=%u, idx_final[%u]:%x, pf:%8x\n",
|
|
iorq, iorq, idxf[iorq], pf);
|
|
|
|
rt2800_write_dc(rt2x00dev, ch_idx, 0, iorq, idxf[iorq]);
|
|
}
|
|
ibit = ibit >> 1;
|
|
}
|
|
dc_result[ch_idx][alc_idx][0] = idxf[0];
|
|
dc_result[ch_idx][alc_idx][1] = idxf[1];
|
|
}
|
|
|
|
static void rt2800_iq_search(struct rt2x00_dev *rt2x00dev, u8 ch_idx, u8 *ges, u8 *pes)
|
|
{
|
|
u32 p0 = 0, p1 = 0, pf = 0;
|
|
s8 perr = 0, gerr = 0, iq_err = 0;
|
|
s8 pef = 0, gef = 0;
|
|
s8 psta, pend;
|
|
s8 gsta, gend;
|
|
|
|
u8 ibit = 0x20;
|
|
u8 first_search = 0x00, touch_neg_max = 0x00;
|
|
s8 idx0 = 0, idx1 = 0;
|
|
u8 gop;
|
|
u8 bbp = 0;
|
|
s8 bidx;
|
|
|
|
for (bidx = 5; bidx >= 1; bidx--) {
|
|
for (gop = 0; gop < 2; gop++) {
|
|
if (gop == 1 || bidx < 4) {
|
|
if (gop == 0)
|
|
iq_err = gerr;
|
|
else
|
|
iq_err = perr;
|
|
|
|
first_search = (gop == 0) ? (bidx == 3) : (bidx == 5);
|
|
touch_neg_max = (gop) ? ((iq_err & 0x0F) == 0x08) :
|
|
((iq_err & 0x3F) == 0x20);
|
|
|
|
if (touch_neg_max) {
|
|
p0 = pf;
|
|
idx0 = iq_err;
|
|
} else {
|
|
idx0 = iq_err - ibit;
|
|
bbp = (ch_idx == 0) ? ((gop == 0) ? 0x28 : 0x29) :
|
|
((gop == 0) ? 0x46 : 0x47);
|
|
|
|
rt2800_bbp_write(rt2x00dev, 158, bbp);
|
|
rt2800_bbp_write(rt2x00dev, 159, idx0);
|
|
|
|
p0 = rt2800_do_fft_accumulation(rt2x00dev, 0x14, 1);
|
|
}
|
|
|
|
idx1 = iq_err + (first_search ? 0 : ibit);
|
|
idx1 = (gop == 0) ? (idx1 & 0x0F) : (idx1 & 0x3F);
|
|
|
|
bbp = (ch_idx == 0) ? (gop == 0) ? 0x28 : 0x29 :
|
|
(gop == 0) ? 0x46 : 0x47;
|
|
|
|
rt2800_bbp_write(rt2x00dev, 158, bbp);
|
|
rt2800_bbp_write(rt2x00dev, 159, idx1);
|
|
|
|
p1 = rt2800_do_fft_accumulation(rt2x00dev, 0x14, 1);
|
|
|
|
rt2x00_dbg(rt2x00dev,
|
|
"p0=%x, p1=%x, pwer_final=%x, idx0=%x, idx1=%x, iq_err=%x, gop=%d, ibit=%x\n",
|
|
p0, p1, pf, idx0, idx1, iq_err, gop, ibit);
|
|
|
|
if (!(!first_search && pf <= p0 && pf < p1)) {
|
|
if (p0 < p1) {
|
|
pf = p0;
|
|
iq_err = idx0;
|
|
} else {
|
|
pf = p1;
|
|
iq_err = idx1;
|
|
}
|
|
}
|
|
|
|
bbp = (ch_idx == 0) ? (gop == 0) ? 0x28 : 0x29 :
|
|
(gop == 0) ? 0x46 : 0x47;
|
|
|
|
rt2800_bbp_write(rt2x00dev, 158, bbp);
|
|
rt2800_bbp_write(rt2x00dev, 159, iq_err);
|
|
|
|
if (gop == 0)
|
|
gerr = iq_err;
|
|
else
|
|
perr = iq_err;
|
|
|
|
rt2x00_dbg(rt2x00dev, "IQCalibration pf=%8x (%2x, %2x) !\n",
|
|
pf, gerr & 0x0F, perr & 0x3F);
|
|
}
|
|
}
|
|
|
|
if (bidx > 0)
|
|
ibit = (ibit >> 1);
|
|
}
|
|
gerr = (gerr & 0x08) ? (gerr & 0x0F) - 0x10 : (gerr & 0x0F);
|
|
perr = (perr & 0x20) ? (perr & 0x3F) - 0x40 : (perr & 0x3F);
|
|
|
|
gerr = (gerr < -0x07) ? -0x07 : (gerr > 0x05) ? 0x05 : gerr;
|
|
gsta = gerr - 1;
|
|
gend = gerr + 2;
|
|
|
|
perr = (perr < -0x1f) ? -0x1f : (perr > 0x1d) ? 0x1d : perr;
|
|
psta = perr - 1;
|
|
pend = perr + 2;
|
|
|
|
for (gef = gsta; gef <= gend; gef = gef + 1)
|
|
for (pef = psta; pef <= pend; pef = pef + 1) {
|
|
bbp = (ch_idx == 0) ? 0x28 : 0x46;
|
|
rt2800_bbp_write(rt2x00dev, 158, bbp);
|
|
rt2800_bbp_write(rt2x00dev, 159, gef & 0x0F);
|
|
|
|
bbp = (ch_idx == 0) ? 0x29 : 0x47;
|
|
rt2800_bbp_write(rt2x00dev, 158, bbp);
|
|
rt2800_bbp_write(rt2x00dev, 159, pef & 0x3F);
|
|
|
|
p1 = rt2800_do_fft_accumulation(rt2x00dev, 0x14, 1);
|
|
if (gef == gsta && pef == psta) {
|
|
pf = p1;
|
|
gerr = gef;
|
|
perr = pef;
|
|
} else if (pf > p1) {
|
|
pf = p1;
|
|
gerr = gef;
|
|
perr = pef;
|
|
}
|
|
rt2x00_dbg(rt2x00dev, "Fine IQCalibration p1=%8x pf=%8x (%2x, %2x) !\n",
|
|
p1, pf, gef & 0x0F, pef & 0x3F);
|
|
}
|
|
|
|
ges[ch_idx] = gerr & 0x0F;
|
|
pes[ch_idx] = perr & 0x3F;
|
|
}
|
|
|
|
static void rt2800_rf_aux_tx0_loopback(struct rt2x00_dev *rt2x00dev)
|
|
{
|
|
rt2800_rfcsr_write_bank(rt2x00dev, 0, 1, 0x21);
|
|
rt2800_rfcsr_write_bank(rt2x00dev, 0, 2, 0x10);
|
|
rt2800_rfcsr_write_bank(rt2x00dev, 0, 35, 0x00);
|
|
rt2800_rfcsr_write_bank(rt2x00dev, 0, 42, 0x1b);
|
|
rt2800_rfcsr_write_bank(rt2x00dev, 4, 0, 0x81);
|
|
rt2800_rfcsr_write_bank(rt2x00dev, 4, 2, 0x81);
|
|
rt2800_rfcsr_write_bank(rt2x00dev, 4, 34, 0xee);
|
|
rt2800_rfcsr_write_bank(rt2x00dev, 5, 3, 0x2d);
|
|
rt2800_rfcsr_write_bank(rt2x00dev, 5, 4, 0x2d);
|
|
rt2800_rfcsr_write_bank(rt2x00dev, 5, 17, 0x80);
|
|
rt2800_rfcsr_write_bank(rt2x00dev, 5, 18, 0xd7);
|
|
rt2800_rfcsr_write_bank(rt2x00dev, 5, 19, 0xa2);
|
|
rt2800_rfcsr_write_bank(rt2x00dev, 5, 20, 0x20);
|
|
}
|
|
|
|
static void rt2800_rf_aux_tx1_loopback(struct rt2x00_dev *rt2x00dev)
|
|
{
|
|
rt2800_rfcsr_write_bank(rt2x00dev, 0, 1, 0x22);
|
|
rt2800_rfcsr_write_bank(rt2x00dev, 0, 2, 0x20);
|
|
rt2800_rfcsr_write_bank(rt2x00dev, 0, 35, 0x00);
|
|
rt2800_rfcsr_write_bank(rt2x00dev, 0, 42, 0x4b);
|
|
rt2800_rfcsr_write_bank(rt2x00dev, 6, 0, 0x81);
|
|
rt2800_rfcsr_write_bank(rt2x00dev, 6, 2, 0x81);
|
|
rt2800_rfcsr_write_bank(rt2x00dev, 6, 34, 0xee);
|
|
rt2800_rfcsr_write_bank(rt2x00dev, 7, 3, 0x2d);
|
|
rt2800_rfcsr_write_bank(rt2x00dev, 7, 4, 0x2d);
|
|
rt2800_rfcsr_write_bank(rt2x00dev, 7, 17, 0x80);
|
|
rt2800_rfcsr_write_bank(rt2x00dev, 7, 18, 0xd7);
|
|
rt2800_rfcsr_write_bank(rt2x00dev, 7, 19, 0xa2);
|
|
rt2800_rfcsr_write_bank(rt2x00dev, 7, 20, 0x20);
|
|
}
|
|
|
|
static void rt2800_loft_iq_calibration(struct rt2x00_dev *rt2x00dev)
|
|
{
|
|
struct rf_reg_pair rf_store[CHAIN_NUM][13];
|
|
u32 macorg1 = 0;
|
|
u32 macorg2 = 0;
|
|
u32 macorg3 = 0;
|
|
u32 macorg4 = 0;
|
|
u32 macorg5 = 0;
|
|
u32 orig528 = 0;
|
|
u32 orig52c = 0;
|
|
|
|
u32 savemacsysctrl = 0;
|
|
u32 macvalue = 0;
|
|
u32 mac13b8 = 0;
|
|
u32 p0 = 0, p1 = 0;
|
|
u32 p0_idx10 = 0, p1_idx10 = 0;
|
|
|
|
u8 rfvalue;
|
|
u8 loft_dc_search_result[CHAIN_NUM][RF_ALC_NUM][2];
|
|
u8 ger[CHAIN_NUM], per[CHAIN_NUM];
|
|
|
|
u8 vga_gain[] = {14, 14};
|
|
u8 bbp = 0, ch_idx = 0, rf_alc_idx = 0, idx = 0;
|
|
u8 bbpr30, rfb0r39, rfb0r42;
|
|
u8 bbpr1;
|
|
u8 bbpr4;
|
|
u8 bbpr241, bbpr242;
|
|
u8 count_step;
|
|
|
|
static const u8 rf_gain[] = {0x00, 0x01, 0x02, 0x04, 0x08, 0x0c};
|
|
static const u8 rfvga_gain_table[] = {0x24, 0x25, 0x26, 0x27, 0x28, 0x2c, 0x2d, 0x2e, 0x2f, 0x30,
|
|
0x31, 0x38, 0x39, 0x3a, 0x3b, 0x3c, 0x3d, 0x3e, 0x3F};
|
|
static const u8 bbp_2324gain[] = {0x16, 0x14, 0x12, 0x10, 0x0c, 0x08};
|
|
|
|
savemacsysctrl = rt2800_register_read(rt2x00dev, MAC_SYS_CTRL);
|
|
macorg1 = rt2800_register_read(rt2x00dev, TX_PIN_CFG);
|
|
macorg2 = rt2800_register_read(rt2x00dev, RF_CONTROL0);
|
|
macorg3 = rt2800_register_read(rt2x00dev, RF_BYPASS0);
|
|
macorg4 = rt2800_register_read(rt2x00dev, RF_CONTROL3);
|
|
macorg5 = rt2800_register_read(rt2x00dev, RF_BYPASS3);
|
|
mac13b8 = rt2800_register_read(rt2x00dev, 0x13b8);
|
|
orig528 = rt2800_register_read(rt2x00dev, RF_CONTROL2);
|
|
orig52c = rt2800_register_read(rt2x00dev, RF_BYPASS2);
|
|
|
|
macvalue = rt2800_register_read(rt2x00dev, MAC_SYS_CTRL);
|
|
macvalue &= (~0x04);
|
|
rt2800_register_write(rt2x00dev, MAC_SYS_CTRL, macvalue);
|
|
|
|
if (unlikely(rt2800_wait_bbp_rf_ready(rt2x00dev, MAC_STATUS_CFG_BBP_RF_BUSY_TX)))
|
|
rt2x00_warn(rt2x00dev, "RF TX busy in LOFT IQ calibration\n");
|
|
|
|
macvalue = rt2800_register_read(rt2x00dev, MAC_SYS_CTRL);
|
|
macvalue &= (~0x08);
|
|
rt2800_register_write(rt2x00dev, MAC_SYS_CTRL, macvalue);
|
|
|
|
if (unlikely(rt2800_wait_bbp_rf_ready(rt2x00dev, MAC_STATUS_CFG_BBP_RF_BUSY_RX)))
|
|
rt2x00_warn(rt2x00dev, "RF RX busy in LOFT IQ calibration\n");
|
|
|
|
for (ch_idx = 0; ch_idx < 2; ch_idx++)
|
|
rt2800_rf_configstore(rt2x00dev, rf_store, ch_idx);
|
|
|
|
bbpr30 = rt2800_bbp_read(rt2x00dev, 30);
|
|
rfb0r39 = rt2800_rfcsr_read_bank(rt2x00dev, 0, 39);
|
|
rfb0r42 = rt2800_rfcsr_read_bank(rt2x00dev, 0, 42);
|
|
|
|
rt2800_bbp_write(rt2x00dev, 30, 0x1F);
|
|
rt2800_rfcsr_write_bank(rt2x00dev, 0, 39, 0x80);
|
|
rt2800_rfcsr_write_bank(rt2x00dev, 0, 42, 0x5B);
|
|
|
|
rt2800_bbp_write(rt2x00dev, 23, 0x00);
|
|
rt2800_bbp_write(rt2x00dev, 24, 0x00);
|
|
|
|
rt2800_setbbptonegenerator(rt2x00dev);
|
|
|
|
for (ch_idx = 0; ch_idx < 2; ch_idx++) {
|
|
rt2800_bbp_write(rt2x00dev, 23, 0x00);
|
|
rt2800_bbp_write(rt2x00dev, 24, 0x00);
|
|
rt2800_register_write(rt2x00dev, MAC_SYS_CTRL, 0x00);
|
|
rt2800_register_write(rt2x00dev, TX_PIN_CFG, 0x0000000F);
|
|
rt2800_register_write(rt2x00dev, RF_CONTROL0, 0x00000004);
|
|
rt2800_register_write(rt2x00dev, RF_BYPASS0, 0x00003306);
|
|
rt2800_register_write(rt2x00dev, 0x13b8, 0x10);
|
|
udelay(1);
|
|
|
|
if (ch_idx == 0)
|
|
rt2800_rf_aux_tx0_loopback(rt2x00dev);
|
|
else
|
|
rt2800_rf_aux_tx1_loopback(rt2x00dev);
|
|
|
|
udelay(1);
|
|
|
|
if (ch_idx == 0)
|
|
rt2800_register_write(rt2x00dev, RF_CONTROL0, 0x00001004);
|
|
else
|
|
rt2800_register_write(rt2x00dev, RF_CONTROL0, 0x00002004);
|
|
|
|
rt2800_bbp_write(rt2x00dev, 158, 0x05);
|
|
rt2800_bbp_write(rt2x00dev, 159, 0x00);
|
|
|
|
rt2800_bbp_write(rt2x00dev, 158, 0x01);
|
|
if (ch_idx == 0)
|
|
rt2800_bbp_write(rt2x00dev, 159, 0x00);
|
|
else
|
|
rt2800_bbp_write(rt2x00dev, 159, 0x01);
|
|
|
|
vga_gain[ch_idx] = 18;
|
|
for (rf_alc_idx = 0; rf_alc_idx < 3; rf_alc_idx++) {
|
|
rt2800_bbp_write(rt2x00dev, 23, bbp_2324gain[rf_alc_idx]);
|
|
rt2800_bbp_write(rt2x00dev, 24, bbp_2324gain[rf_alc_idx]);
|
|
|
|
macvalue = rt2800_register_read(rt2x00dev, RF_CONTROL3);
|
|
macvalue &= (~0x0000F1F1);
|
|
macvalue |= (rf_gain[rf_alc_idx] << 4);
|
|
macvalue |= (rf_gain[rf_alc_idx] << 12);
|
|
rt2800_register_write(rt2x00dev, RF_CONTROL3, macvalue);
|
|
macvalue = (0x0000F1F1);
|
|
rt2800_register_write(rt2x00dev, RF_BYPASS3, macvalue);
|
|
|
|
if (rf_alc_idx == 0) {
|
|
rt2800_write_dc(rt2x00dev, ch_idx, 0, 1, 0x21);
|
|
for (; vga_gain[ch_idx] > 0;
|
|
vga_gain[ch_idx] = vga_gain[ch_idx] - 2) {
|
|
rfvalue = rfvga_gain_table[vga_gain[ch_idx]];
|
|
rt2800_rfcsr_write_dccal(rt2x00dev, 3, rfvalue);
|
|
rt2800_rfcsr_write_dccal(rt2x00dev, 4, rfvalue);
|
|
rt2800_write_dc(rt2x00dev, ch_idx, 0, 1, 0x00);
|
|
rt2800_write_dc(rt2x00dev, ch_idx, 0, 0, 0x00);
|
|
p0 = rt2800_do_fft_accumulation(rt2x00dev, 0x0A, 0);
|
|
rt2800_write_dc(rt2x00dev, ch_idx, 0, 0, 0x21);
|
|
p1 = rt2800_do_fft_accumulation(rt2x00dev, 0x0A, 0);
|
|
rt2x00_dbg(rt2x00dev, "LOFT AGC %d %d\n", p0, p1);
|
|
if ((p0 < 7000 * 7000) && (p1 < (7000 * 7000)))
|
|
break;
|
|
}
|
|
|
|
rt2800_write_dc(rt2x00dev, ch_idx, 0, 0, 0x00);
|
|
rt2800_write_dc(rt2x00dev, ch_idx, 0, 1, 0x00);
|
|
|
|
rt2x00_dbg(rt2x00dev, "Used VGA %d %x\n", vga_gain[ch_idx],
|
|
rfvga_gain_table[vga_gain[ch_idx]]);
|
|
|
|
if (vga_gain[ch_idx] < 0)
|
|
vga_gain[ch_idx] = 0;
|
|
}
|
|
|
|
rfvalue = rfvga_gain_table[vga_gain[ch_idx]];
|
|
|
|
rt2800_rfcsr_write_dccal(rt2x00dev, 3, rfvalue);
|
|
rt2800_rfcsr_write_dccal(rt2x00dev, 4, rfvalue);
|
|
|
|
rt2800_loft_search(rt2x00dev, ch_idx, rf_alc_idx, loft_dc_search_result);
|
|
}
|
|
}
|
|
|
|
for (rf_alc_idx = 0; rf_alc_idx < 3; rf_alc_idx++) {
|
|
for (idx = 0; idx < 4; idx++) {
|
|
rt2800_bbp_write(rt2x00dev, 158, 0xB0);
|
|
bbp = (idx << 2) + rf_alc_idx;
|
|
rt2800_bbp_write(rt2x00dev, 159, bbp);
|
|
rt2x00_dbg(rt2x00dev, " ALC %2x,", bbp);
|
|
|
|
rt2800_bbp_write(rt2x00dev, 158, 0xb1);
|
|
bbp = loft_dc_search_result[CHAIN_0][rf_alc_idx][0x00];
|
|
bbp = bbp & 0x3F;
|
|
rt2800_bbp_write(rt2x00dev, 159, bbp);
|
|
rt2x00_dbg(rt2x00dev, " I0 %2x,", bbp);
|
|
|
|
rt2800_bbp_write(rt2x00dev, 158, 0xb2);
|
|
bbp = loft_dc_search_result[CHAIN_0][rf_alc_idx][0x01];
|
|
bbp = bbp & 0x3F;
|
|
rt2800_bbp_write(rt2x00dev, 159, bbp);
|
|
rt2x00_dbg(rt2x00dev, " Q0 %2x,", bbp);
|
|
|
|
rt2800_bbp_write(rt2x00dev, 158, 0xb8);
|
|
bbp = loft_dc_search_result[CHAIN_1][rf_alc_idx][0x00];
|
|
bbp = bbp & 0x3F;
|
|
rt2800_bbp_write(rt2x00dev, 159, bbp);
|
|
rt2x00_dbg(rt2x00dev, " I1 %2x,", bbp);
|
|
|
|
rt2800_bbp_write(rt2x00dev, 158, 0xb9);
|
|
bbp = loft_dc_search_result[CHAIN_1][rf_alc_idx][0x01];
|
|
bbp = bbp & 0x3F;
|
|
rt2800_bbp_write(rt2x00dev, 159, bbp);
|
|
rt2x00_dbg(rt2x00dev, " Q1 %2x\n", bbp);
|
|
}
|
|
}
|
|
|
|
rt2800_bbp_write(rt2x00dev, 23, 0x00);
|
|
rt2800_bbp_write(rt2x00dev, 24, 0x00);
|
|
|
|
rt2800_register_write(rt2x00dev, RF_CONTROL0, 0x04);
|
|
|
|
rt2800_bbp_write(rt2x00dev, 158, 0x00);
|
|
rt2800_bbp_write(rt2x00dev, 159, 0x00);
|
|
|
|
bbp = 0x00;
|
|
rt2800_bbp_write(rt2x00dev, 244, 0x00);
|
|
|
|
rt2800_bbp_write(rt2x00dev, 21, 0x01);
|
|
udelay(1);
|
|
rt2800_bbp_write(rt2x00dev, 21, 0x00);
|
|
|
|
rt2800_rf_configrecover(rt2x00dev, rf_store);
|
|
|
|
rt2800_register_write(rt2x00dev, TX_PIN_CFG, macorg1);
|
|
rt2800_register_write(rt2x00dev, RF_CONTROL0, 0x04);
|
|
rt2800_register_write(rt2x00dev, RF_CONTROL0, 0x00);
|
|
rt2800_register_write(rt2x00dev, RF_BYPASS0, 0x00);
|
|
rt2800_register_write(rt2x00dev, RF_CONTROL0, macorg2);
|
|
udelay(1);
|
|
rt2800_register_write(rt2x00dev, RF_BYPASS0, macorg3);
|
|
rt2800_register_write(rt2x00dev, RF_CONTROL3, macorg4);
|
|
rt2800_register_write(rt2x00dev, RF_BYPASS3, macorg5);
|
|
rt2800_register_write(rt2x00dev, MAC_SYS_CTRL, savemacsysctrl);
|
|
rt2800_register_write(rt2x00dev, RF_CONTROL2, orig528);
|
|
rt2800_register_write(rt2x00dev, RF_BYPASS2, orig52c);
|
|
rt2800_register_write(rt2x00dev, 0x13b8, mac13b8);
|
|
|
|
savemacsysctrl = rt2800_register_read(rt2x00dev, MAC_SYS_CTRL);
|
|
macorg1 = rt2800_register_read(rt2x00dev, TX_PIN_CFG);
|
|
macorg2 = rt2800_register_read(rt2x00dev, RF_CONTROL0);
|
|
macorg3 = rt2800_register_read(rt2x00dev, RF_BYPASS0);
|
|
macorg4 = rt2800_register_read(rt2x00dev, RF_CONTROL3);
|
|
macorg5 = rt2800_register_read(rt2x00dev, RF_BYPASS3);
|
|
|
|
bbpr1 = rt2800_bbp_read(rt2x00dev, 1);
|
|
bbpr4 = rt2800_bbp_read(rt2x00dev, 4);
|
|
bbpr241 = rt2800_bbp_read(rt2x00dev, 241);
|
|
bbpr242 = rt2800_bbp_read(rt2x00dev, 242);
|
|
mac13b8 = rt2800_register_read(rt2x00dev, 0x13b8);
|
|
|
|
macvalue = rt2800_register_read(rt2x00dev, MAC_SYS_CTRL);
|
|
macvalue &= (~0x04);
|
|
rt2800_register_write(rt2x00dev, MAC_SYS_CTRL, macvalue);
|
|
|
|
if (unlikely(rt2800_wait_bbp_rf_ready(rt2x00dev, MAC_STATUS_CFG_BBP_RF_BUSY_TX)))
|
|
rt2x00_warn(rt2x00dev, "RF TX busy in LOFT IQ calibration\n");
|
|
|
|
macvalue = rt2800_register_read(rt2x00dev, MAC_SYS_CTRL);
|
|
macvalue &= (~0x08);
|
|
rt2800_register_write(rt2x00dev, MAC_SYS_CTRL, macvalue);
|
|
|
|
if (unlikely(rt2800_wait_bbp_rf_ready(rt2x00dev, MAC_STATUS_CFG_BBP_RF_BUSY_RX)))
|
|
rt2x00_warn(rt2x00dev, "RF RX busy in LOFT IQ calibration\n");
|
|
|
|
if (test_bit(CAPABILITY_EXTERNAL_PA_TX0, &rt2x00dev->cap_flags)) {
|
|
rt2800_register_write(rt2x00dev, RF_CONTROL3, 0x00000101);
|
|
rt2800_register_write(rt2x00dev, RF_BYPASS3, 0x0000F1F1);
|
|
}
|
|
|
|
rt2800_bbp_write(rt2x00dev, 23, 0x00);
|
|
rt2800_bbp_write(rt2x00dev, 24, 0x00);
|
|
|
|
if (test_bit(CAPABILITY_EXTERNAL_PA_TX0, &rt2x00dev->cap_flags)) {
|
|
rt2800_bbp_write(rt2x00dev, 4, bbpr4 & (~0x18));
|
|
rt2800_bbp_write(rt2x00dev, 21, 0x01);
|
|
udelay(1);
|
|
rt2800_bbp_write(rt2x00dev, 21, 0x00);
|
|
|
|
rt2800_bbp_write(rt2x00dev, 241, 0x14);
|
|
rt2800_bbp_write(rt2x00dev, 242, 0x80);
|
|
rt2800_bbp_write(rt2x00dev, 244, 0x31);
|
|
} else {
|
|
rt2800_setbbptonegenerator(rt2x00dev);
|
|
}
|
|
|
|
rt2800_register_write(rt2x00dev, RF_CONTROL0, 0x00000004);
|
|
rt2800_register_write(rt2x00dev, RF_BYPASS0, 0x00003306);
|
|
udelay(1);
|
|
|
|
rt2800_register_write(rt2x00dev, TX_PIN_CFG, 0x0000000F);
|
|
|
|
if (!test_bit(CAPABILITY_EXTERNAL_PA_TX0, &rt2x00dev->cap_flags)) {
|
|
rt2800_register_write(rt2x00dev, RF_CONTROL3, 0x00000000);
|
|
rt2800_register_write(rt2x00dev, RF_BYPASS3, 0x0000F1F1);
|
|
}
|
|
|
|
rt2800_register_write(rt2x00dev, 0x13b8, 0x00000010);
|
|
|
|
for (ch_idx = 0; ch_idx < 2; ch_idx++)
|
|
rt2800_rf_configstore(rt2x00dev, rf_store, ch_idx);
|
|
|
|
rt2800_rfcsr_write_dccal(rt2x00dev, 3, 0x3B);
|
|
rt2800_rfcsr_write_dccal(rt2x00dev, 4, 0x3B);
|
|
|
|
rt2800_bbp_write(rt2x00dev, 158, 0x03);
|
|
rt2800_bbp_write(rt2x00dev, 159, 0x60);
|
|
rt2800_bbp_write(rt2x00dev, 158, 0xB0);
|
|
rt2800_bbp_write(rt2x00dev, 159, 0x80);
|
|
|
|
for (ch_idx = 0; ch_idx < 2; ch_idx++) {
|
|
rt2800_bbp_write(rt2x00dev, 23, 0x00);
|
|
rt2800_bbp_write(rt2x00dev, 24, 0x00);
|
|
|
|
if (ch_idx == 0) {
|
|
rt2800_bbp_write(rt2x00dev, 158, 0x01);
|
|
rt2800_bbp_write(rt2x00dev, 159, 0x00);
|
|
if (test_bit(CAPABILITY_EXTERNAL_PA_TX0, &rt2x00dev->cap_flags)) {
|
|
bbp = bbpr1 & (~0x18);
|
|
bbp = bbp | 0x00;
|
|
rt2800_bbp_write(rt2x00dev, 1, bbp);
|
|
}
|
|
rt2800_rf_aux_tx0_loopback(rt2x00dev);
|
|
rt2800_register_write(rt2x00dev, RF_CONTROL0, 0x00001004);
|
|
} else {
|
|
rt2800_bbp_write(rt2x00dev, 158, 0x01);
|
|
rt2800_bbp_write(rt2x00dev, 159, 0x01);
|
|
if (test_bit(CAPABILITY_EXTERNAL_PA_TX1, &rt2x00dev->cap_flags)) {
|
|
bbp = bbpr1 & (~0x18);
|
|
bbp = bbp | 0x08;
|
|
rt2800_bbp_write(rt2x00dev, 1, bbp);
|
|
}
|
|
rt2800_rf_aux_tx1_loopback(rt2x00dev);
|
|
rt2800_register_write(rt2x00dev, RF_CONTROL0, 0x00002004);
|
|
}
|
|
|
|
rt2800_bbp_write(rt2x00dev, 158, 0x05);
|
|
rt2800_bbp_write(rt2x00dev, 159, 0x04);
|
|
|
|
bbp = (ch_idx == 0) ? 0x28 : 0x46;
|
|
rt2800_bbp_write(rt2x00dev, 158, bbp);
|
|
rt2800_bbp_write(rt2x00dev, 159, 0x00);
|
|
|
|
if (test_bit(CAPABILITY_EXTERNAL_PA_TX0, &rt2x00dev->cap_flags)) {
|
|
rt2800_bbp_write(rt2x00dev, 23, 0x06);
|
|
rt2800_bbp_write(rt2x00dev, 24, 0x06);
|
|
count_step = 1;
|
|
} else {
|
|
rt2800_bbp_write(rt2x00dev, 23, 0x1F);
|
|
rt2800_bbp_write(rt2x00dev, 24, 0x1F);
|
|
count_step = 2;
|
|
}
|
|
|
|
for (; vga_gain[ch_idx] < 19; vga_gain[ch_idx] = (vga_gain[ch_idx] + count_step)) {
|
|
rfvalue = rfvga_gain_table[vga_gain[ch_idx]];
|
|
rt2800_rfcsr_write_dccal(rt2x00dev, 3, rfvalue);
|
|
rt2800_rfcsr_write_dccal(rt2x00dev, 4, rfvalue);
|
|
|
|
bbp = (ch_idx == 0) ? 0x29 : 0x47;
|
|
rt2800_bbp_write(rt2x00dev, 158, bbp);
|
|
rt2800_bbp_write(rt2x00dev, 159, 0x00);
|
|
p0 = rt2800_do_fft_accumulation(rt2x00dev, 0x14, 0);
|
|
if (test_bit(CAPABILITY_EXTERNAL_PA_TX0, &rt2x00dev->cap_flags))
|
|
p0_idx10 = rt2800_read_fft_accumulation(rt2x00dev, 0x0A);
|
|
|
|
bbp = (ch_idx == 0) ? 0x29 : 0x47;
|
|
rt2800_bbp_write(rt2x00dev, 158, bbp);
|
|
rt2800_bbp_write(rt2x00dev, 159, 0x21);
|
|
p1 = rt2800_do_fft_accumulation(rt2x00dev, 0x14, 0);
|
|
if (test_bit(CAPABILITY_EXTERNAL_PA_TX1, &rt2x00dev->cap_flags))
|
|
p1_idx10 = rt2800_read_fft_accumulation(rt2x00dev, 0x0A);
|
|
|
|
rt2x00_dbg(rt2x00dev, "IQ AGC %d %d\n", p0, p1);
|
|
|
|
if (test_bit(CAPABILITY_EXTERNAL_PA_TX0, &rt2x00dev->cap_flags)) {
|
|
rt2x00_dbg(rt2x00dev, "IQ AGC IDX 10 %d %d\n", p0_idx10, p1_idx10);
|
|
if ((p0_idx10 > 7000 * 7000) || (p1_idx10 > 7000 * 7000)) {
|
|
if (vga_gain[ch_idx] != 0)
|
|
vga_gain[ch_idx] = vga_gain[ch_idx] - 1;
|
|
break;
|
|
}
|
|
}
|
|
|
|
if ((p0 > 2500 * 2500) || (p1 > 2500 * 2500))
|
|
break;
|
|
}
|
|
|
|
if (vga_gain[ch_idx] > 18)
|
|
vga_gain[ch_idx] = 18;
|
|
rt2x00_dbg(rt2x00dev, "Used VGA %d %x\n", vga_gain[ch_idx],
|
|
rfvga_gain_table[vga_gain[ch_idx]]);
|
|
|
|
bbp = (ch_idx == 0) ? 0x29 : 0x47;
|
|
rt2800_bbp_write(rt2x00dev, 158, bbp);
|
|
rt2800_bbp_write(rt2x00dev, 159, 0x00);
|
|
|
|
rt2800_iq_search(rt2x00dev, ch_idx, ger, per);
|
|
}
|
|
|
|
rt2800_bbp_write(rt2x00dev, 23, 0x00);
|
|
rt2800_bbp_write(rt2x00dev, 24, 0x00);
|
|
rt2800_register_write(rt2x00dev, RF_CONTROL0, 0x04);
|
|
|
|
rt2800_bbp_write(rt2x00dev, 158, 0x28);
|
|
bbp = ger[CHAIN_0] & 0x0F;
|
|
rt2800_bbp_write(rt2x00dev, 159, bbp);
|
|
|
|
rt2800_bbp_write(rt2x00dev, 158, 0x29);
|
|
bbp = per[CHAIN_0] & 0x3F;
|
|
rt2800_bbp_write(rt2x00dev, 159, bbp);
|
|
|
|
rt2800_bbp_write(rt2x00dev, 158, 0x46);
|
|
bbp = ger[CHAIN_1] & 0x0F;
|
|
rt2800_bbp_write(rt2x00dev, 159, bbp);
|
|
|
|
rt2800_bbp_write(rt2x00dev, 158, 0x47);
|
|
bbp = per[CHAIN_1] & 0x3F;
|
|
rt2800_bbp_write(rt2x00dev, 159, bbp);
|
|
|
|
if (test_bit(CAPABILITY_EXTERNAL_PA_TX0, &rt2x00dev->cap_flags)) {
|
|
rt2800_bbp_write(rt2x00dev, 1, bbpr1);
|
|
rt2800_bbp_write(rt2x00dev, 241, bbpr241);
|
|
rt2800_bbp_write(rt2x00dev, 242, bbpr242);
|
|
}
|
|
rt2800_bbp_write(rt2x00dev, 244, 0x00);
|
|
|
|
rt2800_bbp_write(rt2x00dev, 158, 0x00);
|
|
rt2800_bbp_write(rt2x00dev, 159, 0x00);
|
|
rt2800_bbp_write(rt2x00dev, 158, 0xB0);
|
|
rt2800_bbp_write(rt2x00dev, 159, 0x00);
|
|
|
|
rt2800_bbp_write(rt2x00dev, 30, bbpr30);
|
|
rt2800_rfcsr_write_bank(rt2x00dev, 0, 39, rfb0r39);
|
|
rt2800_rfcsr_write_bank(rt2x00dev, 0, 42, rfb0r42);
|
|
|
|
if (test_bit(CAPABILITY_EXTERNAL_PA_TX0, &rt2x00dev->cap_flags))
|
|
rt2800_bbp_write(rt2x00dev, 4, bbpr4);
|
|
|
|
rt2800_bbp_write(rt2x00dev, 21, 0x01);
|
|
udelay(1);
|
|
rt2800_bbp_write(rt2x00dev, 21, 0x00);
|
|
|
|
rt2800_rf_configrecover(rt2x00dev, rf_store);
|
|
|
|
rt2800_register_write(rt2x00dev, TX_PIN_CFG, macorg1);
|
|
rt2800_register_write(rt2x00dev, RF_CONTROL0, 0x00);
|
|
rt2800_register_write(rt2x00dev, RF_BYPASS0, 0x00);
|
|
rt2800_register_write(rt2x00dev, RF_CONTROL0, macorg2);
|
|
udelay(1);
|
|
rt2800_register_write(rt2x00dev, RF_BYPASS0, macorg3);
|
|
rt2800_register_write(rt2x00dev, RF_CONTROL3, macorg4);
|
|
rt2800_register_write(rt2x00dev, RF_BYPASS3, macorg5);
|
|
rt2800_register_write(rt2x00dev, MAC_SYS_CTRL, savemacsysctrl);
|
|
rt2800_register_write(rt2x00dev, 0x13b8, mac13b8);
|
|
}
|
|
|
|
static void rt2800_bbp_core_soft_reset(struct rt2x00_dev *rt2x00dev,
|
|
bool set_bw, bool is_ht40)
|
|
{
|
|
u8 bbp_val;
|
|
|
|
bbp_val = rt2800_bbp_read(rt2x00dev, 21);
|
|
bbp_val |= 0x1;
|
|
rt2800_bbp_write(rt2x00dev, 21, bbp_val);
|
|
usleep_range(100, 200);
|
|
|
|
if (set_bw) {
|
|
bbp_val = rt2800_bbp_read(rt2x00dev, 4);
|
|
rt2x00_set_field8(&bbp_val, BBP4_BANDWIDTH, 2 * is_ht40);
|
|
rt2800_bbp_write(rt2x00dev, 4, bbp_val);
|
|
usleep_range(100, 200);
|
|
}
|
|
|
|
bbp_val = rt2800_bbp_read(rt2x00dev, 21);
|
|
bbp_val &= (~0x1);
|
|
rt2800_bbp_write(rt2x00dev, 21, bbp_val);
|
|
usleep_range(100, 200);
|
|
}
|
|
|
|
static int rt2800_rf_lp_config(struct rt2x00_dev *rt2x00dev, bool btxcal)
|
|
{
|
|
u8 rf_val;
|
|
|
|
if (btxcal)
|
|
rt2800_register_write(rt2x00dev, RF_CONTROL0, 0x04);
|
|
else
|
|
rt2800_register_write(rt2x00dev, RF_CONTROL0, 0x02);
|
|
|
|
rt2800_register_write(rt2x00dev, RF_BYPASS0, 0x06);
|
|
|
|
rf_val = rt2800_rfcsr_read_bank(rt2x00dev, 5, 17);
|
|
rf_val |= 0x80;
|
|
rt2800_rfcsr_write_bank(rt2x00dev, 5, 17, rf_val);
|
|
|
|
if (btxcal) {
|
|
rt2800_rfcsr_write_bank(rt2x00dev, 5, 18, 0xC1);
|
|
rt2800_rfcsr_write_bank(rt2x00dev, 5, 19, 0x20);
|
|
rt2800_rfcsr_write_bank(rt2x00dev, 5, 20, 0x02);
|
|
rf_val = rt2800_rfcsr_read_bank(rt2x00dev, 5, 3);
|
|
rf_val &= (~0x3F);
|
|
rf_val |= 0x3F;
|
|
rt2800_rfcsr_write_bank(rt2x00dev, 5, 3, rf_val);
|
|
rf_val = rt2800_rfcsr_read_bank(rt2x00dev, 5, 4);
|
|
rf_val &= (~0x3F);
|
|
rf_val |= 0x3F;
|
|
rt2800_rfcsr_write_bank(rt2x00dev, 5, 4, rf_val);
|
|
rt2800_rfcsr_write_bank(rt2x00dev, 5, 5, 0x31);
|
|
} else {
|
|
rt2800_rfcsr_write_bank(rt2x00dev, 5, 18, 0xF1);
|
|
rt2800_rfcsr_write_bank(rt2x00dev, 5, 19, 0x18);
|
|
rt2800_rfcsr_write_bank(rt2x00dev, 5, 20, 0x02);
|
|
rf_val = rt2800_rfcsr_read_bank(rt2x00dev, 5, 3);
|
|
rf_val &= (~0x3F);
|
|
rf_val |= 0x34;
|
|
rt2800_rfcsr_write_bank(rt2x00dev, 5, 3, rf_val);
|
|
rf_val = rt2800_rfcsr_read_bank(rt2x00dev, 5, 4);
|
|
rf_val &= (~0x3F);
|
|
rf_val |= 0x34;
|
|
rt2800_rfcsr_write_bank(rt2x00dev, 5, 4, rf_val);
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
static s8 rt2800_lp_tx_filter_bw_cal(struct rt2x00_dev *rt2x00dev)
|
|
{
|
|
unsigned int cnt;
|
|
u8 bbp_val;
|
|
s8 cal_val;
|
|
|
|
rt2800_bbp_dcoc_write(rt2x00dev, 0, 0x82);
|
|
|
|
cnt = 0;
|
|
do {
|
|
usleep_range(500, 2000);
|
|
bbp_val = rt2800_bbp_read(rt2x00dev, 159);
|
|
if (bbp_val == 0x02 || cnt == 20)
|
|
break;
|
|
|
|
cnt++;
|
|
} while (cnt < 20);
|
|
|
|
bbp_val = rt2800_bbp_dcoc_read(rt2x00dev, 0x39);
|
|
cal_val = bbp_val & 0x7F;
|
|
if (cal_val >= 0x40)
|
|
cal_val -= 128;
|
|
|
|
return cal_val;
|
|
}
|
|
|
|
static void rt2800_bw_filter_calibration(struct rt2x00_dev *rt2x00dev,
|
|
bool btxcal)
|
|
{
|
|
struct rt2800_drv_data *drv_data = rt2x00dev->drv_data;
|
|
u8 tx_agc_fc = 0, rx_agc_fc = 0, cmm_agc_fc;
|
|
u8 filter_target;
|
|
u8 tx_filter_target_20m = 0x09, tx_filter_target_40m = 0x02;
|
|
u8 rx_filter_target_20m = 0x27, rx_filter_target_40m = 0x31;
|
|
int loop = 0, is_ht40, cnt;
|
|
u8 bbp_val, rf_val;
|
|
s8 cal_r32_init, cal_r32_val, cal_diff;
|
|
u8 saverfb5r00, saverfb5r01, saverfb5r03, saverfb5r04, saverfb5r05;
|
|
u8 saverfb5r06, saverfb5r07;
|
|
u8 saverfb5r08, saverfb5r17, saverfb5r18, saverfb5r19, saverfb5r20;
|
|
u8 saverfb5r37, saverfb5r38, saverfb5r39, saverfb5r40, saverfb5r41;
|
|
u8 saverfb5r42, saverfb5r43, saverfb5r44, saverfb5r45, saverfb5r46;
|
|
u8 saverfb5r58, saverfb5r59;
|
|
u8 savebbp159r0, savebbp159r2, savebbpr23;
|
|
u32 MAC_RF_CONTROL0, MAC_RF_BYPASS0;
|
|
|
|
/* Save MAC registers */
|
|
MAC_RF_CONTROL0 = rt2800_register_read(rt2x00dev, RF_CONTROL0);
|
|
MAC_RF_BYPASS0 = rt2800_register_read(rt2x00dev, RF_BYPASS0);
|
|
|
|
/* save BBP registers */
|
|
savebbpr23 = rt2800_bbp_read(rt2x00dev, 23);
|
|
|
|
savebbp159r0 = rt2800_bbp_dcoc_read(rt2x00dev, 0);
|
|
savebbp159r2 = rt2800_bbp_dcoc_read(rt2x00dev, 2);
|
|
|
|
/* Save RF registers */
|
|
saverfb5r00 = rt2800_rfcsr_read_bank(rt2x00dev, 5, 0);
|
|
saverfb5r01 = rt2800_rfcsr_read_bank(rt2x00dev, 5, 1);
|
|
saverfb5r03 = rt2800_rfcsr_read_bank(rt2x00dev, 5, 3);
|
|
saverfb5r04 = rt2800_rfcsr_read_bank(rt2x00dev, 5, 4);
|
|
saverfb5r05 = rt2800_rfcsr_read_bank(rt2x00dev, 5, 5);
|
|
saverfb5r06 = rt2800_rfcsr_read_bank(rt2x00dev, 5, 6);
|
|
saverfb5r07 = rt2800_rfcsr_read_bank(rt2x00dev, 5, 7);
|
|
saverfb5r08 = rt2800_rfcsr_read_bank(rt2x00dev, 5, 8);
|
|
saverfb5r17 = rt2800_rfcsr_read_bank(rt2x00dev, 5, 17);
|
|
saverfb5r18 = rt2800_rfcsr_read_bank(rt2x00dev, 5, 18);
|
|
saverfb5r19 = rt2800_rfcsr_read_bank(rt2x00dev, 5, 19);
|
|
saverfb5r20 = rt2800_rfcsr_read_bank(rt2x00dev, 5, 20);
|
|
|
|
saverfb5r37 = rt2800_rfcsr_read_bank(rt2x00dev, 5, 37);
|
|
saverfb5r38 = rt2800_rfcsr_read_bank(rt2x00dev, 5, 38);
|
|
saverfb5r39 = rt2800_rfcsr_read_bank(rt2x00dev, 5, 39);
|
|
saverfb5r40 = rt2800_rfcsr_read_bank(rt2x00dev, 5, 40);
|
|
saverfb5r41 = rt2800_rfcsr_read_bank(rt2x00dev, 5, 41);
|
|
saverfb5r42 = rt2800_rfcsr_read_bank(rt2x00dev, 5, 42);
|
|
saverfb5r43 = rt2800_rfcsr_read_bank(rt2x00dev, 5, 43);
|
|
saverfb5r44 = rt2800_rfcsr_read_bank(rt2x00dev, 5, 44);
|
|
saverfb5r45 = rt2800_rfcsr_read_bank(rt2x00dev, 5, 45);
|
|
saverfb5r46 = rt2800_rfcsr_read_bank(rt2x00dev, 5, 46);
|
|
|
|
saverfb5r58 = rt2800_rfcsr_read_bank(rt2x00dev, 5, 58);
|
|
saverfb5r59 = rt2800_rfcsr_read_bank(rt2x00dev, 5, 59);
|
|
|
|
rf_val = rt2800_rfcsr_read_bank(rt2x00dev, 5, 0);
|
|
rf_val |= 0x3;
|
|
rt2800_rfcsr_write_bank(rt2x00dev, 5, 0, rf_val);
|
|
|
|
rf_val = rt2800_rfcsr_read_bank(rt2x00dev, 5, 1);
|
|
rf_val |= 0x1;
|
|
rt2800_rfcsr_write_bank(rt2x00dev, 5, 1, rf_val);
|
|
|
|
cnt = 0;
|
|
do {
|
|
usleep_range(500, 2000);
|
|
rf_val = rt2800_rfcsr_read_bank(rt2x00dev, 5, 1);
|
|
if (((rf_val & 0x1) == 0x00) || (cnt == 40))
|
|
break;
|
|
cnt++;
|
|
} while (cnt < 40);
|
|
|
|
rf_val = rt2800_rfcsr_read_bank(rt2x00dev, 5, 0);
|
|
rf_val &= (~0x3);
|
|
rf_val |= 0x1;
|
|
rt2800_rfcsr_write_bank(rt2x00dev, 5, 0, rf_val);
|
|
|
|
/* I-3 */
|
|
bbp_val = rt2800_bbp_read(rt2x00dev, 23);
|
|
bbp_val &= (~0x1F);
|
|
bbp_val |= 0x10;
|
|
rt2800_bbp_write(rt2x00dev, 23, bbp_val);
|
|
|
|
do {
|
|
/* I-4,5,6,7,8,9 */
|
|
if (loop == 0) {
|
|
is_ht40 = false;
|
|
|
|
if (btxcal)
|
|
filter_target = tx_filter_target_20m;
|
|
else
|
|
filter_target = rx_filter_target_20m;
|
|
} else {
|
|
is_ht40 = true;
|
|
|
|
if (btxcal)
|
|
filter_target = tx_filter_target_40m;
|
|
else
|
|
filter_target = rx_filter_target_40m;
|
|
}
|
|
|
|
rf_val = rt2800_rfcsr_read_bank(rt2x00dev, 5, 8);
|
|
rf_val &= (~0x04);
|
|
if (loop == 1)
|
|
rf_val |= 0x4;
|
|
|
|
rt2800_rfcsr_write_bank(rt2x00dev, 5, 8, rf_val);
|
|
|
|
rt2800_bbp_core_soft_reset(rt2x00dev, true, is_ht40);
|
|
|
|
rt2800_rf_lp_config(rt2x00dev, btxcal);
|
|
if (btxcal) {
|
|
tx_agc_fc = 0;
|
|
rf_val = rt2800_rfcsr_read_bank(rt2x00dev, 5, 58);
|
|
rf_val &= (~0x7F);
|
|
rt2800_rfcsr_write_bank(rt2x00dev, 5, 58, rf_val);
|
|
rf_val = rt2800_rfcsr_read_bank(rt2x00dev, 5, 59);
|
|
rf_val &= (~0x7F);
|
|
rt2800_rfcsr_write_bank(rt2x00dev, 5, 59, rf_val);
|
|
} else {
|
|
rx_agc_fc = 0;
|
|
rf_val = rt2800_rfcsr_read_bank(rt2x00dev, 5, 6);
|
|
rf_val &= (~0x7F);
|
|
rt2800_rfcsr_write_bank(rt2x00dev, 5, 6, rf_val);
|
|
rf_val = rt2800_rfcsr_read_bank(rt2x00dev, 5, 7);
|
|
rf_val &= (~0x7F);
|
|
rt2800_rfcsr_write_bank(rt2x00dev, 5, 7, rf_val);
|
|
}
|
|
|
|
usleep_range(1000, 2000);
|
|
|
|
bbp_val = rt2800_bbp_dcoc_read(rt2x00dev, 2);
|
|
bbp_val &= (~0x6);
|
|
rt2800_bbp_dcoc_write(rt2x00dev, 2, bbp_val);
|
|
|
|
rt2800_bbp_core_soft_reset(rt2x00dev, false, is_ht40);
|
|
|
|
cal_r32_init = rt2800_lp_tx_filter_bw_cal(rt2x00dev);
|
|
|
|
bbp_val = rt2800_bbp_dcoc_read(rt2x00dev, 2);
|
|
bbp_val |= 0x6;
|
|
rt2800_bbp_dcoc_write(rt2x00dev, 2, bbp_val);
|
|
do_cal:
|
|
if (btxcal) {
|
|
rf_val = rt2800_rfcsr_read_bank(rt2x00dev, 5, 58);
|
|
rf_val &= (~0x7F);
|
|
rf_val |= tx_agc_fc;
|
|
rt2800_rfcsr_write_bank(rt2x00dev, 5, 58, rf_val);
|
|
rf_val = rt2800_rfcsr_read_bank(rt2x00dev, 5, 59);
|
|
rf_val &= (~0x7F);
|
|
rf_val |= tx_agc_fc;
|
|
rt2800_rfcsr_write_bank(rt2x00dev, 5, 59, rf_val);
|
|
} else {
|
|
rf_val = rt2800_rfcsr_read_bank(rt2x00dev, 5, 6);
|
|
rf_val &= (~0x7F);
|
|
rf_val |= rx_agc_fc;
|
|
rt2800_rfcsr_write_bank(rt2x00dev, 5, 6, rf_val);
|
|
rf_val = rt2800_rfcsr_read_bank(rt2x00dev, 5, 7);
|
|
rf_val &= (~0x7F);
|
|
rf_val |= rx_agc_fc;
|
|
rt2800_rfcsr_write_bank(rt2x00dev, 5, 7, rf_val);
|
|
}
|
|
|
|
usleep_range(500, 1000);
|
|
|
|
rt2800_bbp_core_soft_reset(rt2x00dev, false, is_ht40);
|
|
|
|
cal_r32_val = rt2800_lp_tx_filter_bw_cal(rt2x00dev);
|
|
|
|
cal_diff = cal_r32_init - cal_r32_val;
|
|
|
|
if (btxcal)
|
|
cmm_agc_fc = tx_agc_fc;
|
|
else
|
|
cmm_agc_fc = rx_agc_fc;
|
|
|
|
if (((cal_diff > filter_target) && (cmm_agc_fc == 0)) ||
|
|
((cal_diff < filter_target) && (cmm_agc_fc == 0x3f))) {
|
|
if (btxcal)
|
|
tx_agc_fc = 0;
|
|
else
|
|
rx_agc_fc = 0;
|
|
} else if ((cal_diff <= filter_target) && (cmm_agc_fc < 0x3f)) {
|
|
if (btxcal)
|
|
tx_agc_fc++;
|
|
else
|
|
rx_agc_fc++;
|
|
goto do_cal;
|
|
}
|
|
|
|
if (btxcal) {
|
|
if (loop == 0)
|
|
drv_data->tx_calibration_bw20 = tx_agc_fc;
|
|
else
|
|
drv_data->tx_calibration_bw40 = tx_agc_fc;
|
|
} else {
|
|
if (loop == 0)
|
|
drv_data->rx_calibration_bw20 = rx_agc_fc;
|
|
else
|
|
drv_data->rx_calibration_bw40 = rx_agc_fc;
|
|
}
|
|
|
|
loop++;
|
|
} while (loop <= 1);
|
|
|
|
rt2800_rfcsr_write_bank(rt2x00dev, 5, 0, saverfb5r00);
|
|
rt2800_rfcsr_write_bank(rt2x00dev, 5, 1, saverfb5r01);
|
|
rt2800_rfcsr_write_bank(rt2x00dev, 5, 3, saverfb5r03);
|
|
rt2800_rfcsr_write_bank(rt2x00dev, 5, 4, saverfb5r04);
|
|
rt2800_rfcsr_write_bank(rt2x00dev, 5, 5, saverfb5r05);
|
|
rt2800_rfcsr_write_bank(rt2x00dev, 5, 6, saverfb5r06);
|
|
rt2800_rfcsr_write_bank(rt2x00dev, 5, 7, saverfb5r07);
|
|
rt2800_rfcsr_write_bank(rt2x00dev, 5, 8, saverfb5r08);
|
|
rt2800_rfcsr_write_bank(rt2x00dev, 5, 17, saverfb5r17);
|
|
rt2800_rfcsr_write_bank(rt2x00dev, 5, 18, saverfb5r18);
|
|
rt2800_rfcsr_write_bank(rt2x00dev, 5, 19, saverfb5r19);
|
|
rt2800_rfcsr_write_bank(rt2x00dev, 5, 20, saverfb5r20);
|
|
|
|
rt2800_rfcsr_write_bank(rt2x00dev, 5, 37, saverfb5r37);
|
|
rt2800_rfcsr_write_bank(rt2x00dev, 5, 38, saverfb5r38);
|
|
rt2800_rfcsr_write_bank(rt2x00dev, 5, 39, saverfb5r39);
|
|
rt2800_rfcsr_write_bank(rt2x00dev, 5, 40, saverfb5r40);
|
|
rt2800_rfcsr_write_bank(rt2x00dev, 5, 41, saverfb5r41);
|
|
rt2800_rfcsr_write_bank(rt2x00dev, 5, 42, saverfb5r42);
|
|
rt2800_rfcsr_write_bank(rt2x00dev, 5, 43, saverfb5r43);
|
|
rt2800_rfcsr_write_bank(rt2x00dev, 5, 44, saverfb5r44);
|
|
rt2800_rfcsr_write_bank(rt2x00dev, 5, 45, saverfb5r45);
|
|
rt2800_rfcsr_write_bank(rt2x00dev, 5, 46, saverfb5r46);
|
|
|
|
rt2800_rfcsr_write_bank(rt2x00dev, 5, 58, saverfb5r58);
|
|
rt2800_rfcsr_write_bank(rt2x00dev, 5, 59, saverfb5r59);
|
|
|
|
rt2800_bbp_write(rt2x00dev, 23, savebbpr23);
|
|
|
|
rt2800_bbp_dcoc_write(rt2x00dev, 0, savebbp159r0);
|
|
rt2800_bbp_dcoc_write(rt2x00dev, 2, savebbp159r2);
|
|
|
|
bbp_val = rt2800_bbp_read(rt2x00dev, 4);
|
|
rt2x00_set_field8(&bbp_val, BBP4_BANDWIDTH,
|
|
2 * test_bit(CONFIG_CHANNEL_HT40, &rt2x00dev->flags));
|
|
rt2800_bbp_write(rt2x00dev, 4, bbp_val);
|
|
|
|
rt2800_register_write(rt2x00dev, RF_CONTROL0, MAC_RF_CONTROL0);
|
|
rt2800_register_write(rt2x00dev, RF_BYPASS0, MAC_RF_BYPASS0);
|
|
}
|
|
|
|
static void rt2800_init_rfcsr_6352(struct rt2x00_dev *rt2x00dev)
|
|
{
|
|
/* Initialize RF central register to default value */
|
|
rt2800_rfcsr_write(rt2x00dev, 0, 0x02);
|
|
rt2800_rfcsr_write(rt2x00dev, 1, 0x03);
|
|
rt2800_rfcsr_write(rt2x00dev, 2, 0x33);
|
|
rt2800_rfcsr_write(rt2x00dev, 3, 0xFF);
|
|
rt2800_rfcsr_write(rt2x00dev, 4, 0x0C);
|
|
rt2800_rfcsr_write(rt2x00dev, 5, 0x40);
|
|
rt2800_rfcsr_write(rt2x00dev, 6, 0x00);
|
|
rt2800_rfcsr_write(rt2x00dev, 7, 0x00);
|
|
rt2800_rfcsr_write(rt2x00dev, 8, 0x00);
|
|
rt2800_rfcsr_write(rt2x00dev, 9, 0x00);
|
|
rt2800_rfcsr_write(rt2x00dev, 10, 0x00);
|
|
rt2800_rfcsr_write(rt2x00dev, 11, 0x00);
|
|
rt2800_rfcsr_write(rt2x00dev, 12, rt2x00dev->freq_offset);
|
|
rt2800_rfcsr_write(rt2x00dev, 13, 0x00);
|
|
rt2800_rfcsr_write(rt2x00dev, 14, 0x40);
|
|
rt2800_rfcsr_write(rt2x00dev, 15, 0x22);
|
|
rt2800_rfcsr_write(rt2x00dev, 16, 0x4C);
|
|
rt2800_rfcsr_write(rt2x00dev, 17, 0x00);
|
|
rt2800_rfcsr_write(rt2x00dev, 18, 0x00);
|
|
rt2800_rfcsr_write(rt2x00dev, 19, 0x00);
|
|
rt2800_rfcsr_write(rt2x00dev, 20, 0xA0);
|
|
rt2800_rfcsr_write(rt2x00dev, 21, 0x12);
|
|
rt2800_rfcsr_write(rt2x00dev, 22, 0x07);
|
|
rt2800_rfcsr_write(rt2x00dev, 23, 0x13);
|
|
rt2800_rfcsr_write(rt2x00dev, 24, 0xFE);
|
|
rt2800_rfcsr_write(rt2x00dev, 25, 0x24);
|
|
rt2800_rfcsr_write(rt2x00dev, 26, 0x7A);
|
|
rt2800_rfcsr_write(rt2x00dev, 27, 0x00);
|
|
rt2800_rfcsr_write(rt2x00dev, 28, 0x00);
|
|
rt2800_rfcsr_write(rt2x00dev, 29, 0x05);
|
|
rt2800_rfcsr_write(rt2x00dev, 30, 0x00);
|
|
rt2800_rfcsr_write(rt2x00dev, 31, 0x00);
|
|
rt2800_rfcsr_write(rt2x00dev, 32, 0x00);
|
|
rt2800_rfcsr_write(rt2x00dev, 33, 0x00);
|
|
rt2800_rfcsr_write(rt2x00dev, 34, 0x00);
|
|
rt2800_rfcsr_write(rt2x00dev, 35, 0x00);
|
|
rt2800_rfcsr_write(rt2x00dev, 36, 0x00);
|
|
rt2800_rfcsr_write(rt2x00dev, 37, 0x00);
|
|
rt2800_rfcsr_write(rt2x00dev, 38, 0x00);
|
|
rt2800_rfcsr_write(rt2x00dev, 39, 0x00);
|
|
rt2800_rfcsr_write(rt2x00dev, 40, 0x00);
|
|
rt2800_rfcsr_write(rt2x00dev, 41, 0xD0);
|
|
rt2800_rfcsr_write(rt2x00dev, 42, 0x5B);
|
|
rt2800_rfcsr_write(rt2x00dev, 43, 0x00);
|
|
|
|
rt2800_rfcsr_write(rt2x00dev, 11, 0x21);
|
|
if (rt2800_clk_is_20mhz(rt2x00dev))
|
|
rt2800_rfcsr_write(rt2x00dev, 13, 0x03);
|
|
else
|
|
rt2800_rfcsr_write(rt2x00dev, 13, 0x00);
|
|
rt2800_rfcsr_write(rt2x00dev, 14, 0x7C);
|
|
rt2800_rfcsr_write(rt2x00dev, 16, 0x80);
|
|
rt2800_rfcsr_write(rt2x00dev, 17, 0x99);
|
|
rt2800_rfcsr_write(rt2x00dev, 18, 0x99);
|
|
rt2800_rfcsr_write(rt2x00dev, 19, 0x09);
|
|
rt2800_rfcsr_write(rt2x00dev, 20, 0x50);
|
|
rt2800_rfcsr_write(rt2x00dev, 21, 0xB0);
|
|
rt2800_rfcsr_write(rt2x00dev, 22, 0x00);
|
|
rt2800_rfcsr_write(rt2x00dev, 23, 0x06);
|
|
rt2800_rfcsr_write(rt2x00dev, 24, 0x00);
|
|
rt2800_rfcsr_write(rt2x00dev, 25, 0x00);
|
|
rt2800_rfcsr_write(rt2x00dev, 26, 0x5D);
|
|
rt2800_rfcsr_write(rt2x00dev, 27, 0x00);
|
|
rt2800_rfcsr_write(rt2x00dev, 28, 0x61);
|
|
rt2800_rfcsr_write(rt2x00dev, 29, 0xB5);
|
|
rt2800_rfcsr_write(rt2x00dev, 43, 0x02);
|
|
|
|
rt2800_rfcsr_write(rt2x00dev, 28, 0x62);
|
|
rt2800_rfcsr_write(rt2x00dev, 29, 0xAD);
|
|
rt2800_rfcsr_write(rt2x00dev, 39, 0x80);
|
|
|
|
/* Initialize RF channel register to default value */
|
|
rt2800_rfcsr_write_chanreg(rt2x00dev, 0, 0x03);
|
|
rt2800_rfcsr_write_chanreg(rt2x00dev, 1, 0x00);
|
|
rt2800_rfcsr_write_chanreg(rt2x00dev, 2, 0x00);
|
|
rt2800_rfcsr_write_chanreg(rt2x00dev, 3, 0x00);
|
|
rt2800_rfcsr_write_chanreg(rt2x00dev, 4, 0x00);
|
|
rt2800_rfcsr_write_chanreg(rt2x00dev, 5, 0x08);
|
|
rt2800_rfcsr_write_chanreg(rt2x00dev, 6, 0x00);
|
|
rt2800_rfcsr_write_chanreg(rt2x00dev, 7, 0x51);
|
|
rt2800_rfcsr_write_chanreg(rt2x00dev, 8, 0x53);
|
|
rt2800_rfcsr_write_chanreg(rt2x00dev, 9, 0x16);
|
|
rt2800_rfcsr_write_chanreg(rt2x00dev, 10, 0x61);
|
|
rt2800_rfcsr_write_chanreg(rt2x00dev, 11, 0x53);
|
|
rt2800_rfcsr_write_chanreg(rt2x00dev, 12, 0x22);
|
|
rt2800_rfcsr_write_chanreg(rt2x00dev, 13, 0x3D);
|
|
rt2800_rfcsr_write_chanreg(rt2x00dev, 14, 0x06);
|
|
rt2800_rfcsr_write_chanreg(rt2x00dev, 15, 0x13);
|
|
rt2800_rfcsr_write_chanreg(rt2x00dev, 16, 0x22);
|
|
rt2800_rfcsr_write_chanreg(rt2x00dev, 17, 0x27);
|
|
rt2800_rfcsr_write_chanreg(rt2x00dev, 18, 0x02);
|
|
rt2800_rfcsr_write_chanreg(rt2x00dev, 19, 0xA7);
|
|
rt2800_rfcsr_write_chanreg(rt2x00dev, 20, 0x01);
|
|
rt2800_rfcsr_write_chanreg(rt2x00dev, 21, 0x52);
|
|
rt2800_rfcsr_write_chanreg(rt2x00dev, 22, 0x80);
|
|
rt2800_rfcsr_write_chanreg(rt2x00dev, 23, 0xB3);
|
|
rt2800_rfcsr_write_chanreg(rt2x00dev, 24, 0x00);
|
|
rt2800_rfcsr_write_chanreg(rt2x00dev, 25, 0x00);
|
|
rt2800_rfcsr_write_chanreg(rt2x00dev, 26, 0x00);
|
|
rt2800_rfcsr_write_chanreg(rt2x00dev, 27, 0x00);
|
|
rt2800_rfcsr_write_chanreg(rt2x00dev, 28, 0x5C);
|
|
rt2800_rfcsr_write_chanreg(rt2x00dev, 29, 0x6B);
|
|
rt2800_rfcsr_write_chanreg(rt2x00dev, 30, 0x6B);
|
|
rt2800_rfcsr_write_chanreg(rt2x00dev, 31, 0x31);
|
|
rt2800_rfcsr_write_chanreg(rt2x00dev, 32, 0x5D);
|
|
rt2800_rfcsr_write_chanreg(rt2x00dev, 33, 0x00);
|
|
rt2800_rfcsr_write_chanreg(rt2x00dev, 34, 0xE6);
|
|
rt2800_rfcsr_write_chanreg(rt2x00dev, 35, 0x55);
|
|
rt2800_rfcsr_write_chanreg(rt2x00dev, 36, 0x00);
|
|
rt2800_rfcsr_write_chanreg(rt2x00dev, 37, 0xBB);
|
|
rt2800_rfcsr_write_chanreg(rt2x00dev, 38, 0xB3);
|
|
rt2800_rfcsr_write_chanreg(rt2x00dev, 39, 0xB3);
|
|
rt2800_rfcsr_write_chanreg(rt2x00dev, 40, 0x03);
|
|
rt2800_rfcsr_write_chanreg(rt2x00dev, 41, 0x00);
|
|
rt2800_rfcsr_write_chanreg(rt2x00dev, 42, 0x00);
|
|
rt2800_rfcsr_write_chanreg(rt2x00dev, 43, 0xB3);
|
|
rt2800_rfcsr_write_chanreg(rt2x00dev, 44, 0xD3);
|
|
rt2800_rfcsr_write_chanreg(rt2x00dev, 45, 0xD5);
|
|
rt2800_rfcsr_write_chanreg(rt2x00dev, 46, 0x07);
|
|
rt2800_rfcsr_write_chanreg(rt2x00dev, 47, 0x68);
|
|
rt2800_rfcsr_write_chanreg(rt2x00dev, 48, 0xEF);
|
|
rt2800_rfcsr_write_chanreg(rt2x00dev, 49, 0x1C);
|
|
rt2800_rfcsr_write_chanreg(rt2x00dev, 54, 0x07);
|
|
rt2800_rfcsr_write_chanreg(rt2x00dev, 55, 0xA8);
|
|
rt2800_rfcsr_write_chanreg(rt2x00dev, 56, 0x85);
|
|
rt2800_rfcsr_write_chanreg(rt2x00dev, 57, 0x10);
|
|
rt2800_rfcsr_write_chanreg(rt2x00dev, 58, 0x07);
|
|
rt2800_rfcsr_write_chanreg(rt2x00dev, 59, 0x6A);
|
|
rt2800_rfcsr_write_chanreg(rt2x00dev, 60, 0x85);
|
|
rt2800_rfcsr_write_chanreg(rt2x00dev, 61, 0x10);
|
|
rt2800_rfcsr_write_chanreg(rt2x00dev, 62, 0x1C);
|
|
rt2800_rfcsr_write_chanreg(rt2x00dev, 63, 0x00);
|
|
|
|
rt2800_rfcsr_write_bank(rt2x00dev, 6, 45, 0xC5);
|
|
|
|
rt2800_rfcsr_write_chanreg(rt2x00dev, 9, 0x47);
|
|
rt2800_rfcsr_write_chanreg(rt2x00dev, 10, 0x71);
|
|
rt2800_rfcsr_write_chanreg(rt2x00dev, 11, 0x33);
|
|
rt2800_rfcsr_write_chanreg(rt2x00dev, 14, 0x0E);
|
|
rt2800_rfcsr_write_chanreg(rt2x00dev, 17, 0x23);
|
|
rt2800_rfcsr_write_chanreg(rt2x00dev, 19, 0xA4);
|
|
rt2800_rfcsr_write_chanreg(rt2x00dev, 20, 0x02);
|
|
rt2800_rfcsr_write_chanreg(rt2x00dev, 21, 0x12);
|
|
rt2800_rfcsr_write_chanreg(rt2x00dev, 28, 0x1C);
|
|
rt2800_rfcsr_write_chanreg(rt2x00dev, 29, 0xEB);
|
|
rt2800_rfcsr_write_chanreg(rt2x00dev, 32, 0x7D);
|
|
rt2800_rfcsr_write_chanreg(rt2x00dev, 34, 0xD6);
|
|
rt2800_rfcsr_write_chanreg(rt2x00dev, 36, 0x08);
|
|
rt2800_rfcsr_write_chanreg(rt2x00dev, 38, 0xB4);
|
|
rt2800_rfcsr_write_chanreg(rt2x00dev, 43, 0xD3);
|
|
rt2800_rfcsr_write_chanreg(rt2x00dev, 44, 0xB3);
|
|
rt2800_rfcsr_write_chanreg(rt2x00dev, 45, 0xD5);
|
|
rt2800_rfcsr_write_chanreg(rt2x00dev, 46, 0x27);
|
|
rt2800_rfcsr_write_bank(rt2x00dev, 4, 47, 0x67);
|
|
rt2800_rfcsr_write_bank(rt2x00dev, 6, 47, 0x69);
|
|
rt2800_rfcsr_write_chanreg(rt2x00dev, 48, 0xFF);
|
|
rt2800_rfcsr_write_bank(rt2x00dev, 4, 54, 0x27);
|
|
rt2800_rfcsr_write_bank(rt2x00dev, 6, 54, 0x20);
|
|
rt2800_rfcsr_write_chanreg(rt2x00dev, 55, 0x66);
|
|
rt2800_rfcsr_write_chanreg(rt2x00dev, 56, 0xFF);
|
|
rt2800_rfcsr_write_chanreg(rt2x00dev, 57, 0x1C);
|
|
rt2800_rfcsr_write_chanreg(rt2x00dev, 58, 0x20);
|
|
rt2800_rfcsr_write_chanreg(rt2x00dev, 59, 0x6B);
|
|
rt2800_rfcsr_write_chanreg(rt2x00dev, 60, 0xF7);
|
|
rt2800_rfcsr_write_chanreg(rt2x00dev, 61, 0x09);
|
|
|
|
rt2800_rfcsr_write_chanreg(rt2x00dev, 10, 0x51);
|
|
rt2800_rfcsr_write_chanreg(rt2x00dev, 14, 0x06);
|
|
rt2800_rfcsr_write_chanreg(rt2x00dev, 19, 0xA7);
|
|
rt2800_rfcsr_write_chanreg(rt2x00dev, 28, 0x2C);
|
|
rt2800_rfcsr_write_chanreg(rt2x00dev, 55, 0x64);
|
|
rt2800_rfcsr_write_chanreg(rt2x00dev, 8, 0x51);
|
|
rt2800_rfcsr_write_chanreg(rt2x00dev, 9, 0x36);
|
|
rt2800_rfcsr_write_chanreg(rt2x00dev, 11, 0x53);
|
|
rt2800_rfcsr_write_chanreg(rt2x00dev, 14, 0x16);
|
|
|
|
rt2800_rfcsr_write_chanreg(rt2x00dev, 47, 0x6C);
|
|
rt2800_rfcsr_write_chanreg(rt2x00dev, 48, 0xFC);
|
|
rt2800_rfcsr_write_chanreg(rt2x00dev, 49, 0x1F);
|
|
rt2800_rfcsr_write_chanreg(rt2x00dev, 54, 0x27);
|
|
rt2800_rfcsr_write_chanreg(rt2x00dev, 55, 0x66);
|
|
rt2800_rfcsr_write_chanreg(rt2x00dev, 59, 0x6B);
|
|
|
|
/* Initialize RF channel register for DRQFN */
|
|
rt2800_rfcsr_write_chanreg(rt2x00dev, 43, 0xD3);
|
|
rt2800_rfcsr_write_chanreg(rt2x00dev, 44, 0xE3);
|
|
rt2800_rfcsr_write_chanreg(rt2x00dev, 45, 0xE5);
|
|
rt2800_rfcsr_write_chanreg(rt2x00dev, 47, 0x28);
|
|
rt2800_rfcsr_write_chanreg(rt2x00dev, 55, 0x68);
|
|
rt2800_rfcsr_write_chanreg(rt2x00dev, 56, 0xF7);
|
|
rt2800_rfcsr_write_chanreg(rt2x00dev, 58, 0x02);
|
|
rt2800_rfcsr_write_chanreg(rt2x00dev, 60, 0xC7);
|
|
|
|
/* Initialize RF DC calibration register to default value */
|
|
rt2800_rfcsr_write_dccal(rt2x00dev, 0, 0x47);
|
|
rt2800_rfcsr_write_dccal(rt2x00dev, 1, 0x00);
|
|
rt2800_rfcsr_write_dccal(rt2x00dev, 2, 0x00);
|
|
rt2800_rfcsr_write_dccal(rt2x00dev, 3, 0x00);
|
|
rt2800_rfcsr_write_dccal(rt2x00dev, 4, 0x00);
|
|
rt2800_rfcsr_write_dccal(rt2x00dev, 5, 0x00);
|
|
rt2800_rfcsr_write_dccal(rt2x00dev, 6, 0x10);
|
|
rt2800_rfcsr_write_dccal(rt2x00dev, 7, 0x10);
|
|
rt2800_rfcsr_write_dccal(rt2x00dev, 8, 0x04);
|
|
rt2800_rfcsr_write_dccal(rt2x00dev, 9, 0x00);
|
|
rt2800_rfcsr_write_dccal(rt2x00dev, 10, 0x07);
|
|
rt2800_rfcsr_write_dccal(rt2x00dev, 11, 0x01);
|
|
rt2800_rfcsr_write_dccal(rt2x00dev, 12, 0x07);
|
|
rt2800_rfcsr_write_dccal(rt2x00dev, 13, 0x07);
|
|
rt2800_rfcsr_write_dccal(rt2x00dev, 14, 0x07);
|
|
rt2800_rfcsr_write_dccal(rt2x00dev, 15, 0x20);
|
|
rt2800_rfcsr_write_dccal(rt2x00dev, 16, 0x22);
|
|
rt2800_rfcsr_write_dccal(rt2x00dev, 17, 0x00);
|
|
rt2800_rfcsr_write_dccal(rt2x00dev, 18, 0x00);
|
|
rt2800_rfcsr_write_dccal(rt2x00dev, 19, 0x00);
|
|
rt2800_rfcsr_write_dccal(rt2x00dev, 20, 0x00);
|
|
rt2800_rfcsr_write_dccal(rt2x00dev, 21, 0xF1);
|
|
rt2800_rfcsr_write_dccal(rt2x00dev, 22, 0x11);
|
|
rt2800_rfcsr_write_dccal(rt2x00dev, 23, 0x02);
|
|
rt2800_rfcsr_write_dccal(rt2x00dev, 24, 0x41);
|
|
rt2800_rfcsr_write_dccal(rt2x00dev, 25, 0x20);
|
|
rt2800_rfcsr_write_dccal(rt2x00dev, 26, 0x00);
|
|
rt2800_rfcsr_write_dccal(rt2x00dev, 27, 0xD7);
|
|
rt2800_rfcsr_write_dccal(rt2x00dev, 28, 0xA2);
|
|
rt2800_rfcsr_write_dccal(rt2x00dev, 29, 0x20);
|
|
rt2800_rfcsr_write_dccal(rt2x00dev, 30, 0x49);
|
|
rt2800_rfcsr_write_dccal(rt2x00dev, 31, 0x20);
|
|
rt2800_rfcsr_write_dccal(rt2x00dev, 32, 0x04);
|
|
rt2800_rfcsr_write_dccal(rt2x00dev, 33, 0xF1);
|
|
rt2800_rfcsr_write_dccal(rt2x00dev, 34, 0xA1);
|
|
rt2800_rfcsr_write_dccal(rt2x00dev, 35, 0x01);
|
|
rt2800_rfcsr_write_dccal(rt2x00dev, 41, 0x00);
|
|
rt2800_rfcsr_write_dccal(rt2x00dev, 42, 0x00);
|
|
rt2800_rfcsr_write_dccal(rt2x00dev, 43, 0x00);
|
|
rt2800_rfcsr_write_dccal(rt2x00dev, 44, 0x00);
|
|
rt2800_rfcsr_write_dccal(rt2x00dev, 45, 0x00);
|
|
rt2800_rfcsr_write_dccal(rt2x00dev, 46, 0x00);
|
|
rt2800_rfcsr_write_dccal(rt2x00dev, 47, 0x3E);
|
|
rt2800_rfcsr_write_dccal(rt2x00dev, 48, 0x3D);
|
|
rt2800_rfcsr_write_dccal(rt2x00dev, 49, 0x3E);
|
|
rt2800_rfcsr_write_dccal(rt2x00dev, 50, 0x3D);
|
|
rt2800_rfcsr_write_dccal(rt2x00dev, 51, 0x3E);
|
|
rt2800_rfcsr_write_dccal(rt2x00dev, 52, 0x3D);
|
|
rt2800_rfcsr_write_dccal(rt2x00dev, 53, 0x00);
|
|
rt2800_rfcsr_write_dccal(rt2x00dev, 54, 0x00);
|
|
rt2800_rfcsr_write_dccal(rt2x00dev, 55, 0x00);
|
|
rt2800_rfcsr_write_dccal(rt2x00dev, 56, 0x00);
|
|
rt2800_rfcsr_write_dccal(rt2x00dev, 57, 0x00);
|
|
rt2800_rfcsr_write_dccal(rt2x00dev, 58, 0x10);
|
|
rt2800_rfcsr_write_dccal(rt2x00dev, 59, 0x10);
|
|
rt2800_rfcsr_write_dccal(rt2x00dev, 60, 0x0A);
|
|
rt2800_rfcsr_write_dccal(rt2x00dev, 61, 0x00);
|
|
rt2800_rfcsr_write_dccal(rt2x00dev, 62, 0x00);
|
|
rt2800_rfcsr_write_dccal(rt2x00dev, 63, 0x00);
|
|
|
|
rt2800_rfcsr_write_dccal(rt2x00dev, 3, 0x08);
|
|
rt2800_rfcsr_write_dccal(rt2x00dev, 4, 0x04);
|
|
rt2800_rfcsr_write_dccal(rt2x00dev, 5, 0x20);
|
|
|
|
rt2800_rfcsr_write_dccal(rt2x00dev, 5, 0x00);
|
|
rt2800_rfcsr_write_dccal(rt2x00dev, 17, 0x7C);
|
|
|
|
rt2800_r_calibration(rt2x00dev);
|
|
rt2800_rf_self_txdc_cal(rt2x00dev);
|
|
rt2800_rxdcoc_calibration(rt2x00dev);
|
|
rt2800_bw_filter_calibration(rt2x00dev, true);
|
|
rt2800_bw_filter_calibration(rt2x00dev, false);
|
|
rt2800_loft_iq_calibration(rt2x00dev);
|
|
rt2800_rxiq_calibration(rt2x00dev);
|
|
}
|
|
|
|
static void rt2800_init_rfcsr(struct rt2x00_dev *rt2x00dev)
|
|
{
|
|
if (rt2800_is_305x_soc(rt2x00dev)) {
|
|
rt2800_init_rfcsr_305x_soc(rt2x00dev);
|
|
return;
|
|
}
|
|
|
|
switch (rt2x00dev->chip.rt) {
|
|
case RT3070:
|
|
case RT3071:
|
|
case RT3090:
|
|
rt2800_init_rfcsr_30xx(rt2x00dev);
|
|
break;
|
|
case RT3290:
|
|
rt2800_init_rfcsr_3290(rt2x00dev);
|
|
break;
|
|
case RT3352:
|
|
rt2800_init_rfcsr_3352(rt2x00dev);
|
|
break;
|
|
case RT3390:
|
|
rt2800_init_rfcsr_3390(rt2x00dev);
|
|
break;
|
|
case RT3883:
|
|
rt2800_init_rfcsr_3883(rt2x00dev);
|
|
break;
|
|
case RT3572:
|
|
rt2800_init_rfcsr_3572(rt2x00dev);
|
|
break;
|
|
case RT3593:
|
|
rt2800_init_rfcsr_3593(rt2x00dev);
|
|
break;
|
|
case RT5350:
|
|
rt2800_init_rfcsr_5350(rt2x00dev);
|
|
break;
|
|
case RT5390:
|
|
rt2800_init_rfcsr_5390(rt2x00dev);
|
|
break;
|
|
case RT5392:
|
|
rt2800_init_rfcsr_5392(rt2x00dev);
|
|
break;
|
|
case RT5592:
|
|
rt2800_init_rfcsr_5592(rt2x00dev);
|
|
break;
|
|
case RT6352:
|
|
rt2800_init_rfcsr_6352(rt2x00dev);
|
|
break;
|
|
}
|
|
}
|
|
|
|
int rt2800_enable_radio(struct rt2x00_dev *rt2x00dev)
|
|
{
|
|
u32 reg;
|
|
u16 word;
|
|
|
|
/*
|
|
* Initialize MAC registers.
|
|
*/
|
|
if (unlikely(rt2800_wait_wpdma_ready(rt2x00dev) ||
|
|
rt2800_init_registers(rt2x00dev)))
|
|
return -EIO;
|
|
|
|
/*
|
|
* Wait BBP/RF to wake up.
|
|
*/
|
|
if (unlikely(rt2800_wait_bbp_rf_ready(rt2x00dev, MAC_STATUS_CFG_BBP_RF_BUSY)))
|
|
return -EIO;
|
|
|
|
/*
|
|
* Send signal during boot time to initialize firmware.
|
|
*/
|
|
rt2800_register_write(rt2x00dev, H2M_BBP_AGENT, 0);
|
|
rt2800_register_write(rt2x00dev, H2M_MAILBOX_CSR, 0);
|
|
if (rt2x00_is_usb(rt2x00dev))
|
|
rt2800_register_write(rt2x00dev, H2M_INT_SRC, 0);
|
|
rt2800_mcu_request(rt2x00dev, MCU_BOOT_SIGNAL, 0, 0, 0);
|
|
msleep(1);
|
|
|
|
/*
|
|
* Make sure BBP is up and running.
|
|
*/
|
|
if (unlikely(rt2800_wait_bbp_ready(rt2x00dev)))
|
|
return -EIO;
|
|
|
|
/*
|
|
* Initialize BBP/RF registers.
|
|
*/
|
|
rt2800_init_bbp(rt2x00dev);
|
|
rt2800_init_rfcsr(rt2x00dev);
|
|
|
|
if (rt2x00_is_usb(rt2x00dev) &&
|
|
(rt2x00_rt(rt2x00dev, RT3070) ||
|
|
rt2x00_rt(rt2x00dev, RT3071) ||
|
|
rt2x00_rt(rt2x00dev, RT3572))) {
|
|
udelay(200);
|
|
rt2800_mcu_request(rt2x00dev, MCU_CURRENT, 0, 0, 0);
|
|
udelay(10);
|
|
}
|
|
|
|
/*
|
|
* Enable RX.
|
|
*/
|
|
reg = rt2800_register_read(rt2x00dev, MAC_SYS_CTRL);
|
|
rt2x00_set_field32(®, MAC_SYS_CTRL_ENABLE_TX, 1);
|
|
rt2x00_set_field32(®, MAC_SYS_CTRL_ENABLE_RX, 0);
|
|
rt2800_register_write(rt2x00dev, MAC_SYS_CTRL, reg);
|
|
|
|
udelay(50);
|
|
|
|
reg = rt2800_register_read(rt2x00dev, WPDMA_GLO_CFG);
|
|
rt2x00_set_field32(®, WPDMA_GLO_CFG_ENABLE_TX_DMA, 1);
|
|
rt2x00_set_field32(®, WPDMA_GLO_CFG_ENABLE_RX_DMA, 1);
|
|
rt2x00_set_field32(®, WPDMA_GLO_CFG_TX_WRITEBACK_DONE, 1);
|
|
rt2800_register_write(rt2x00dev, WPDMA_GLO_CFG, reg);
|
|
|
|
reg = rt2800_register_read(rt2x00dev, MAC_SYS_CTRL);
|
|
rt2x00_set_field32(®, MAC_SYS_CTRL_ENABLE_TX, 1);
|
|
rt2x00_set_field32(®, MAC_SYS_CTRL_ENABLE_RX, 1);
|
|
rt2800_register_write(rt2x00dev, MAC_SYS_CTRL, reg);
|
|
|
|
/*
|
|
* Initialize LED control
|
|
*/
|
|
word = rt2800_eeprom_read(rt2x00dev, EEPROM_LED_AG_CONF);
|
|
rt2800_mcu_request(rt2x00dev, MCU_LED_AG_CONF, 0xff,
|
|
word & 0xff, (word >> 8) & 0xff);
|
|
|
|
word = rt2800_eeprom_read(rt2x00dev, EEPROM_LED_ACT_CONF);
|
|
rt2800_mcu_request(rt2x00dev, MCU_LED_ACT_CONF, 0xff,
|
|
word & 0xff, (word >> 8) & 0xff);
|
|
|
|
word = rt2800_eeprom_read(rt2x00dev, EEPROM_LED_POLARITY);
|
|
rt2800_mcu_request(rt2x00dev, MCU_LED_LED_POLARITY, 0xff,
|
|
word & 0xff, (word >> 8) & 0xff);
|
|
|
|
return 0;
|
|
}
|
|
EXPORT_SYMBOL_GPL(rt2800_enable_radio);
|
|
|
|
void rt2800_disable_radio(struct rt2x00_dev *rt2x00dev)
|
|
{
|
|
u32 reg;
|
|
|
|
rt2800_disable_wpdma(rt2x00dev);
|
|
|
|
/* Wait for DMA, ignore error */
|
|
rt2800_wait_wpdma_ready(rt2x00dev);
|
|
|
|
reg = rt2800_register_read(rt2x00dev, MAC_SYS_CTRL);
|
|
rt2x00_set_field32(®, MAC_SYS_CTRL_ENABLE_TX, 0);
|
|
rt2x00_set_field32(®, MAC_SYS_CTRL_ENABLE_RX, 0);
|
|
rt2800_register_write(rt2x00dev, MAC_SYS_CTRL, reg);
|
|
}
|
|
EXPORT_SYMBOL_GPL(rt2800_disable_radio);
|
|
|
|
int rt2800_efuse_detect(struct rt2x00_dev *rt2x00dev)
|
|
{
|
|
u32 reg;
|
|
u16 efuse_ctrl_reg;
|
|
|
|
if (rt2x00_rt(rt2x00dev, RT3290))
|
|
efuse_ctrl_reg = EFUSE_CTRL_3290;
|
|
else
|
|
efuse_ctrl_reg = EFUSE_CTRL;
|
|
|
|
reg = rt2800_register_read(rt2x00dev, efuse_ctrl_reg);
|
|
return rt2x00_get_field32(reg, EFUSE_CTRL_PRESENT);
|
|
}
|
|
EXPORT_SYMBOL_GPL(rt2800_efuse_detect);
|
|
|
|
static void rt2800_efuse_read(struct rt2x00_dev *rt2x00dev, unsigned int i)
|
|
{
|
|
u32 reg;
|
|
u16 efuse_ctrl_reg;
|
|
u16 efuse_data0_reg;
|
|
u16 efuse_data1_reg;
|
|
u16 efuse_data2_reg;
|
|
u16 efuse_data3_reg;
|
|
|
|
if (rt2x00_rt(rt2x00dev, RT3290)) {
|
|
efuse_ctrl_reg = EFUSE_CTRL_3290;
|
|
efuse_data0_reg = EFUSE_DATA0_3290;
|
|
efuse_data1_reg = EFUSE_DATA1_3290;
|
|
efuse_data2_reg = EFUSE_DATA2_3290;
|
|
efuse_data3_reg = EFUSE_DATA3_3290;
|
|
} else {
|
|
efuse_ctrl_reg = EFUSE_CTRL;
|
|
efuse_data0_reg = EFUSE_DATA0;
|
|
efuse_data1_reg = EFUSE_DATA1;
|
|
efuse_data2_reg = EFUSE_DATA2;
|
|
efuse_data3_reg = EFUSE_DATA3;
|
|
}
|
|
mutex_lock(&rt2x00dev->csr_mutex);
|
|
|
|
reg = rt2800_register_read_lock(rt2x00dev, efuse_ctrl_reg);
|
|
rt2x00_set_field32(®, EFUSE_CTRL_ADDRESS_IN, i);
|
|
rt2x00_set_field32(®, EFUSE_CTRL_MODE, 0);
|
|
rt2x00_set_field32(®, EFUSE_CTRL_KICK, 1);
|
|
rt2800_register_write_lock(rt2x00dev, efuse_ctrl_reg, reg);
|
|
|
|
/* Wait until the EEPROM has been loaded */
|
|
rt2800_regbusy_read(rt2x00dev, efuse_ctrl_reg, EFUSE_CTRL_KICK, ®);
|
|
/* Apparently the data is read from end to start */
|
|
reg = rt2800_register_read_lock(rt2x00dev, efuse_data3_reg);
|
|
/* The returned value is in CPU order, but eeprom is le */
|
|
*(u32 *)&rt2x00dev->eeprom[i] = cpu_to_le32(reg);
|
|
reg = rt2800_register_read_lock(rt2x00dev, efuse_data2_reg);
|
|
*(u32 *)&rt2x00dev->eeprom[i + 2] = cpu_to_le32(reg);
|
|
reg = rt2800_register_read_lock(rt2x00dev, efuse_data1_reg);
|
|
*(u32 *)&rt2x00dev->eeprom[i + 4] = cpu_to_le32(reg);
|
|
reg = rt2800_register_read_lock(rt2x00dev, efuse_data0_reg);
|
|
*(u32 *)&rt2x00dev->eeprom[i + 6] = cpu_to_le32(reg);
|
|
|
|
mutex_unlock(&rt2x00dev->csr_mutex);
|
|
}
|
|
|
|
int rt2800_read_eeprom_efuse(struct rt2x00_dev *rt2x00dev)
|
|
{
|
|
unsigned int i;
|
|
|
|
for (i = 0; i < EEPROM_SIZE / sizeof(u16); i += 8)
|
|
rt2800_efuse_read(rt2x00dev, i);
|
|
|
|
return 0;
|
|
}
|
|
EXPORT_SYMBOL_GPL(rt2800_read_eeprom_efuse);
|
|
|
|
static u8 rt2800_get_txmixer_gain_24g(struct rt2x00_dev *rt2x00dev)
|
|
{
|
|
u16 word;
|
|
|
|
if (rt2x00_rt(rt2x00dev, RT3593) ||
|
|
rt2x00_rt(rt2x00dev, RT3883))
|
|
return 0;
|
|
|
|
word = rt2800_eeprom_read(rt2x00dev, EEPROM_TXMIXER_GAIN_BG);
|
|
if ((word & 0x00ff) != 0x00ff)
|
|
return rt2x00_get_field16(word, EEPROM_TXMIXER_GAIN_BG_VAL);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static u8 rt2800_get_txmixer_gain_5g(struct rt2x00_dev *rt2x00dev)
|
|
{
|
|
u16 word;
|
|
|
|
if (rt2x00_rt(rt2x00dev, RT3593) ||
|
|
rt2x00_rt(rt2x00dev, RT3883))
|
|
return 0;
|
|
|
|
word = rt2800_eeprom_read(rt2x00dev, EEPROM_TXMIXER_GAIN_A);
|
|
if ((word & 0x00ff) != 0x00ff)
|
|
return rt2x00_get_field16(word, EEPROM_TXMIXER_GAIN_A_VAL);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int rt2800_validate_eeprom(struct rt2x00_dev *rt2x00dev)
|
|
{
|
|
struct rt2800_drv_data *drv_data = rt2x00dev->drv_data;
|
|
u16 word;
|
|
u8 *mac;
|
|
u8 default_lna_gain;
|
|
int retval;
|
|
|
|
/*
|
|
* Read the EEPROM.
|
|
*/
|
|
retval = rt2800_read_eeprom(rt2x00dev);
|
|
if (retval)
|
|
return retval;
|
|
|
|
/*
|
|
* Start validation of the data that has been read.
|
|
*/
|
|
mac = rt2800_eeprom_addr(rt2x00dev, EEPROM_MAC_ADDR_0);
|
|
rt2x00lib_set_mac_address(rt2x00dev, mac);
|
|
|
|
word = rt2800_eeprom_read(rt2x00dev, EEPROM_NIC_CONF0);
|
|
if (word == 0xffff) {
|
|
rt2x00_set_field16(&word, EEPROM_NIC_CONF0_RXPATH, 2);
|
|
rt2x00_set_field16(&word, EEPROM_NIC_CONF0_TXPATH, 1);
|
|
rt2x00_set_field16(&word, EEPROM_NIC_CONF0_RF_TYPE, RF2820);
|
|
rt2800_eeprom_write(rt2x00dev, EEPROM_NIC_CONF0, word);
|
|
rt2x00_eeprom_dbg(rt2x00dev, "Antenna: 0x%04x\n", word);
|
|
} else if (rt2x00_rt(rt2x00dev, RT2860) ||
|
|
rt2x00_rt(rt2x00dev, RT2872)) {
|
|
/*
|
|
* There is a max of 2 RX streams for RT28x0 series
|
|
*/
|
|
if (rt2x00_get_field16(word, EEPROM_NIC_CONF0_RXPATH) > 2)
|
|
rt2x00_set_field16(&word, EEPROM_NIC_CONF0_RXPATH, 2);
|
|
rt2800_eeprom_write(rt2x00dev, EEPROM_NIC_CONF0, word);
|
|
}
|
|
|
|
word = rt2800_eeprom_read(rt2x00dev, EEPROM_NIC_CONF1);
|
|
if (word == 0xffff) {
|
|
rt2x00_set_field16(&word, EEPROM_NIC_CONF1_HW_RADIO, 0);
|
|
rt2x00_set_field16(&word, EEPROM_NIC_CONF1_EXTERNAL_TX_ALC, 0);
|
|
rt2x00_set_field16(&word, EEPROM_NIC_CONF1_EXTERNAL_LNA_2G, 0);
|
|
rt2x00_set_field16(&word, EEPROM_NIC_CONF1_EXTERNAL_LNA_5G, 0);
|
|
rt2x00_set_field16(&word, EEPROM_NIC_CONF1_CARDBUS_ACCEL, 0);
|
|
rt2x00_set_field16(&word, EEPROM_NIC_CONF1_BW40M_SB_2G, 0);
|
|
rt2x00_set_field16(&word, EEPROM_NIC_CONF1_BW40M_SB_5G, 0);
|
|
rt2x00_set_field16(&word, EEPROM_NIC_CONF1_WPS_PBC, 0);
|
|
rt2x00_set_field16(&word, EEPROM_NIC_CONF1_BW40M_2G, 0);
|
|
rt2x00_set_field16(&word, EEPROM_NIC_CONF1_BW40M_5G, 0);
|
|
rt2x00_set_field16(&word, EEPROM_NIC_CONF1_BROADBAND_EXT_LNA, 0);
|
|
rt2x00_set_field16(&word, EEPROM_NIC_CONF1_ANT_DIVERSITY, 0);
|
|
rt2x00_set_field16(&word, EEPROM_NIC_CONF1_INTERNAL_TX_ALC, 0);
|
|
rt2x00_set_field16(&word, EEPROM_NIC_CONF1_BT_COEXIST, 0);
|
|
rt2x00_set_field16(&word, EEPROM_NIC_CONF1_DAC_TEST, 0);
|
|
rt2800_eeprom_write(rt2x00dev, EEPROM_NIC_CONF1, word);
|
|
rt2x00_eeprom_dbg(rt2x00dev, "NIC: 0x%04x\n", word);
|
|
}
|
|
|
|
word = rt2800_eeprom_read(rt2x00dev, EEPROM_FREQ);
|
|
if ((word & 0x00ff) == 0x00ff) {
|
|
rt2x00_set_field16(&word, EEPROM_FREQ_OFFSET, 0);
|
|
rt2800_eeprom_write(rt2x00dev, EEPROM_FREQ, word);
|
|
rt2x00_eeprom_dbg(rt2x00dev, "Freq: 0x%04x\n", word);
|
|
}
|
|
if ((word & 0xff00) == 0xff00) {
|
|
rt2x00_set_field16(&word, EEPROM_FREQ_LED_MODE,
|
|
LED_MODE_TXRX_ACTIVITY);
|
|
rt2x00_set_field16(&word, EEPROM_FREQ_LED_POLARITY, 0);
|
|
rt2800_eeprom_write(rt2x00dev, EEPROM_FREQ, word);
|
|
rt2800_eeprom_write(rt2x00dev, EEPROM_LED_AG_CONF, 0x5555);
|
|
rt2800_eeprom_write(rt2x00dev, EEPROM_LED_ACT_CONF, 0x2221);
|
|
rt2800_eeprom_write(rt2x00dev, EEPROM_LED_POLARITY, 0xa9f8);
|
|
rt2x00_eeprom_dbg(rt2x00dev, "Led Mode: 0x%04x\n", word);
|
|
}
|
|
|
|
/*
|
|
* During the LNA validation we are going to use
|
|
* lna0 as correct value. Note that EEPROM_LNA
|
|
* is never validated.
|
|
*/
|
|
word = rt2800_eeprom_read(rt2x00dev, EEPROM_LNA);
|
|
default_lna_gain = rt2x00_get_field16(word, EEPROM_LNA_A0);
|
|
|
|
word = rt2800_eeprom_read(rt2x00dev, EEPROM_RSSI_BG);
|
|
if (abs(rt2x00_get_field16(word, EEPROM_RSSI_BG_OFFSET0)) > 10)
|
|
rt2x00_set_field16(&word, EEPROM_RSSI_BG_OFFSET0, 0);
|
|
if (abs(rt2x00_get_field16(word, EEPROM_RSSI_BG_OFFSET1)) > 10)
|
|
rt2x00_set_field16(&word, EEPROM_RSSI_BG_OFFSET1, 0);
|
|
rt2800_eeprom_write(rt2x00dev, EEPROM_RSSI_BG, word);
|
|
|
|
drv_data->txmixer_gain_24g = rt2800_get_txmixer_gain_24g(rt2x00dev);
|
|
|
|
word = rt2800_eeprom_read(rt2x00dev, EEPROM_RSSI_BG2);
|
|
if (abs(rt2x00_get_field16(word, EEPROM_RSSI_BG2_OFFSET2)) > 10)
|
|
rt2x00_set_field16(&word, EEPROM_RSSI_BG2_OFFSET2, 0);
|
|
if (!rt2x00_rt(rt2x00dev, RT3593) &&
|
|
!rt2x00_rt(rt2x00dev, RT3883)) {
|
|
if (rt2x00_get_field16(word, EEPROM_RSSI_BG2_LNA_A1) == 0x00 ||
|
|
rt2x00_get_field16(word, EEPROM_RSSI_BG2_LNA_A1) == 0xff)
|
|
rt2x00_set_field16(&word, EEPROM_RSSI_BG2_LNA_A1,
|
|
default_lna_gain);
|
|
}
|
|
rt2800_eeprom_write(rt2x00dev, EEPROM_RSSI_BG2, word);
|
|
|
|
drv_data->txmixer_gain_5g = rt2800_get_txmixer_gain_5g(rt2x00dev);
|
|
|
|
word = rt2800_eeprom_read(rt2x00dev, EEPROM_RSSI_A);
|
|
if (abs(rt2x00_get_field16(word, EEPROM_RSSI_A_OFFSET0)) > 10)
|
|
rt2x00_set_field16(&word, EEPROM_RSSI_A_OFFSET0, 0);
|
|
if (abs(rt2x00_get_field16(word, EEPROM_RSSI_A_OFFSET1)) > 10)
|
|
rt2x00_set_field16(&word, EEPROM_RSSI_A_OFFSET1, 0);
|
|
rt2800_eeprom_write(rt2x00dev, EEPROM_RSSI_A, word);
|
|
|
|
word = rt2800_eeprom_read(rt2x00dev, EEPROM_RSSI_A2);
|
|
if (abs(rt2x00_get_field16(word, EEPROM_RSSI_A2_OFFSET2)) > 10)
|
|
rt2x00_set_field16(&word, EEPROM_RSSI_A2_OFFSET2, 0);
|
|
if (!rt2x00_rt(rt2x00dev, RT3593) &&
|
|
!rt2x00_rt(rt2x00dev, RT3883)) {
|
|
if (rt2x00_get_field16(word, EEPROM_RSSI_A2_LNA_A2) == 0x00 ||
|
|
rt2x00_get_field16(word, EEPROM_RSSI_A2_LNA_A2) == 0xff)
|
|
rt2x00_set_field16(&word, EEPROM_RSSI_A2_LNA_A2,
|
|
default_lna_gain);
|
|
}
|
|
rt2800_eeprom_write(rt2x00dev, EEPROM_RSSI_A2, word);
|
|
|
|
if (rt2x00_rt(rt2x00dev, RT3593) ||
|
|
rt2x00_rt(rt2x00dev, RT3883)) {
|
|
word = rt2800_eeprom_read(rt2x00dev, EEPROM_EXT_LNA2);
|
|
if (rt2x00_get_field16(word, EEPROM_EXT_LNA2_A1) == 0x00 ||
|
|
rt2x00_get_field16(word, EEPROM_EXT_LNA2_A1) == 0xff)
|
|
rt2x00_set_field16(&word, EEPROM_EXT_LNA2_A1,
|
|
default_lna_gain);
|
|
if (rt2x00_get_field16(word, EEPROM_EXT_LNA2_A2) == 0x00 ||
|
|
rt2x00_get_field16(word, EEPROM_EXT_LNA2_A2) == 0xff)
|
|
rt2x00_set_field16(&word, EEPROM_EXT_LNA2_A1,
|
|
default_lna_gain);
|
|
rt2800_eeprom_write(rt2x00dev, EEPROM_EXT_LNA2, word);
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int rt2800_init_eeprom(struct rt2x00_dev *rt2x00dev)
|
|
{
|
|
u16 value;
|
|
u16 eeprom;
|
|
u16 rf;
|
|
|
|
/*
|
|
* Read EEPROM word for configuration.
|
|
*/
|
|
eeprom = rt2800_eeprom_read(rt2x00dev, EEPROM_NIC_CONF0);
|
|
|
|
/*
|
|
* Identify RF chipset by EEPROM value
|
|
* RT28xx/RT30xx: defined in "EEPROM_NIC_CONF0_RF_TYPE" field
|
|
* RT53xx: defined in "EEPROM_CHIP_ID" field
|
|
*/
|
|
if (rt2x00_rt(rt2x00dev, RT3290) ||
|
|
rt2x00_rt(rt2x00dev, RT5390) ||
|
|
rt2x00_rt(rt2x00dev, RT5392) ||
|
|
rt2x00_rt(rt2x00dev, RT6352))
|
|
rf = rt2800_eeprom_read(rt2x00dev, EEPROM_CHIP_ID);
|
|
else if (rt2x00_rt(rt2x00dev, RT3352))
|
|
rf = RF3322;
|
|
else if (rt2x00_rt(rt2x00dev, RT3883))
|
|
rf = RF3853;
|
|
else if (rt2x00_rt(rt2x00dev, RT5350))
|
|
rf = RF5350;
|
|
else if (rt2x00_rt(rt2x00dev, RT5592))
|
|
rf = RF5592;
|
|
else
|
|
rf = rt2x00_get_field16(eeprom, EEPROM_NIC_CONF0_RF_TYPE);
|
|
|
|
switch (rf) {
|
|
case RF2820:
|
|
case RF2850:
|
|
case RF2720:
|
|
case RF2750:
|
|
case RF3020:
|
|
case RF2020:
|
|
case RF3021:
|
|
case RF3022:
|
|
case RF3052:
|
|
case RF3053:
|
|
case RF3070:
|
|
case RF3290:
|
|
case RF3320:
|
|
case RF3322:
|
|
case RF3853:
|
|
case RF5350:
|
|
case RF5360:
|
|
case RF5362:
|
|
case RF5370:
|
|
case RF5372:
|
|
case RF5390:
|
|
case RF5392:
|
|
case RF5592:
|
|
case RF7620:
|
|
break;
|
|
default:
|
|
rt2x00_err(rt2x00dev, "Invalid RF chipset 0x%04x detected\n",
|
|
rf);
|
|
return -ENODEV;
|
|
}
|
|
|
|
rt2x00_set_rf(rt2x00dev, rf);
|
|
|
|
/*
|
|
* Identify default antenna configuration.
|
|
*/
|
|
rt2x00dev->default_ant.tx_chain_num =
|
|
rt2x00_get_field16(eeprom, EEPROM_NIC_CONF0_TXPATH);
|
|
rt2x00dev->default_ant.rx_chain_num =
|
|
rt2x00_get_field16(eeprom, EEPROM_NIC_CONF0_RXPATH);
|
|
|
|
eeprom = rt2800_eeprom_read(rt2x00dev, EEPROM_NIC_CONF1);
|
|
|
|
if (rt2x00_rt(rt2x00dev, RT3070) ||
|
|
rt2x00_rt(rt2x00dev, RT3090) ||
|
|
rt2x00_rt(rt2x00dev, RT3352) ||
|
|
rt2x00_rt(rt2x00dev, RT3390)) {
|
|
value = rt2x00_get_field16(eeprom,
|
|
EEPROM_NIC_CONF1_ANT_DIVERSITY);
|
|
switch (value) {
|
|
case 0:
|
|
case 1:
|
|
case 2:
|
|
rt2x00dev->default_ant.tx = ANTENNA_A;
|
|
rt2x00dev->default_ant.rx = ANTENNA_A;
|
|
break;
|
|
case 3:
|
|
rt2x00dev->default_ant.tx = ANTENNA_A;
|
|
rt2x00dev->default_ant.rx = ANTENNA_B;
|
|
break;
|
|
}
|
|
} else {
|
|
rt2x00dev->default_ant.tx = ANTENNA_A;
|
|
rt2x00dev->default_ant.rx = ANTENNA_A;
|
|
}
|
|
|
|
/* These chips have hardware RX antenna diversity */
|
|
if (rt2x00_rt_rev_gte(rt2x00dev, RT5390, REV_RT5390R) ||
|
|
rt2x00_rt_rev_gte(rt2x00dev, RT5390, REV_RT5370G)) {
|
|
rt2x00dev->default_ant.tx = ANTENNA_HW_DIVERSITY; /* Unused */
|
|
rt2x00dev->default_ant.rx = ANTENNA_HW_DIVERSITY; /* Unused */
|
|
}
|
|
|
|
/*
|
|
* Determine external LNA informations.
|
|
*/
|
|
if (rt2x00_get_field16(eeprom, EEPROM_NIC_CONF1_EXTERNAL_LNA_5G))
|
|
__set_bit(CAPABILITY_EXTERNAL_LNA_A, &rt2x00dev->cap_flags);
|
|
if (rt2x00_get_field16(eeprom, EEPROM_NIC_CONF1_EXTERNAL_LNA_2G))
|
|
__set_bit(CAPABILITY_EXTERNAL_LNA_BG, &rt2x00dev->cap_flags);
|
|
|
|
/*
|
|
* Detect if this device has an hardware controlled radio.
|
|
*/
|
|
if (rt2x00_get_field16(eeprom, EEPROM_NIC_CONF1_HW_RADIO))
|
|
__set_bit(CAPABILITY_HW_BUTTON, &rt2x00dev->cap_flags);
|
|
|
|
/*
|
|
* Detect if this device has Bluetooth co-existence.
|
|
*/
|
|
if (!rt2x00_rt(rt2x00dev, RT3352) &&
|
|
rt2x00_get_field16(eeprom, EEPROM_NIC_CONF1_BT_COEXIST))
|
|
__set_bit(CAPABILITY_BT_COEXIST, &rt2x00dev->cap_flags);
|
|
|
|
/*
|
|
* Read frequency offset and RF programming sequence.
|
|
*/
|
|
eeprom = rt2800_eeprom_read(rt2x00dev, EEPROM_FREQ);
|
|
rt2x00dev->freq_offset = rt2x00_get_field16(eeprom, EEPROM_FREQ_OFFSET);
|
|
|
|
/*
|
|
* Store led settings, for correct led behaviour.
|
|
*/
|
|
#ifdef CONFIG_RT2X00_LIB_LEDS
|
|
rt2800_init_led(rt2x00dev, &rt2x00dev->led_radio, LED_TYPE_RADIO);
|
|
rt2800_init_led(rt2x00dev, &rt2x00dev->led_assoc, LED_TYPE_ASSOC);
|
|
rt2800_init_led(rt2x00dev, &rt2x00dev->led_qual, LED_TYPE_QUALITY);
|
|
|
|
rt2x00dev->led_mcu_reg = eeprom;
|
|
#endif /* CONFIG_RT2X00_LIB_LEDS */
|
|
|
|
/*
|
|
* Check if support EIRP tx power limit feature.
|
|
*/
|
|
eeprom = rt2800_eeprom_read(rt2x00dev, EEPROM_EIRP_MAX_TX_POWER);
|
|
|
|
if (rt2x00_get_field16(eeprom, EEPROM_EIRP_MAX_TX_POWER_2GHZ) <
|
|
EIRP_MAX_TX_POWER_LIMIT)
|
|
__set_bit(CAPABILITY_POWER_LIMIT, &rt2x00dev->cap_flags);
|
|
|
|
/*
|
|
* Detect if device uses internal or external PA
|
|
*/
|
|
eeprom = rt2800_eeprom_read(rt2x00dev, EEPROM_NIC_CONF1);
|
|
|
|
if (rt2x00_rt(rt2x00dev, RT3352) ||
|
|
rt2x00_rt(rt2x00dev, RT6352)) {
|
|
if (rt2x00_get_field16(eeprom,
|
|
EEPROM_NIC_CONF1_EXTERNAL_TX0_PA_3352))
|
|
__set_bit(CAPABILITY_EXTERNAL_PA_TX0,
|
|
&rt2x00dev->cap_flags);
|
|
if (rt2x00_get_field16(eeprom,
|
|
EEPROM_NIC_CONF1_EXTERNAL_TX1_PA_3352))
|
|
__set_bit(CAPABILITY_EXTERNAL_PA_TX1,
|
|
&rt2x00dev->cap_flags);
|
|
}
|
|
|
|
eeprom = rt2800_eeprom_read(rt2x00dev, EEPROM_NIC_CONF2);
|
|
|
|
if (rt2x00_rt(rt2x00dev, RT6352) && eeprom != 0 && eeprom != 0xffff) {
|
|
if (!rt2x00_get_field16(eeprom,
|
|
EEPROM_NIC_CONF2_EXTERNAL_PA)) {
|
|
__clear_bit(CAPABILITY_EXTERNAL_PA_TX0,
|
|
&rt2x00dev->cap_flags);
|
|
__clear_bit(CAPABILITY_EXTERNAL_PA_TX1,
|
|
&rt2x00dev->cap_flags);
|
|
}
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
/*
|
|
* RF value list for rt28xx
|
|
* Supports: 2.4 GHz (all) & 5.2 GHz (RF2850 & RF2750)
|
|
*/
|
|
static const struct rf_channel rf_vals[] = {
|
|
{ 1, 0x18402ecc, 0x184c0786, 0x1816b455, 0x1800510b },
|
|
{ 2, 0x18402ecc, 0x184c0786, 0x18168a55, 0x1800519f },
|
|
{ 3, 0x18402ecc, 0x184c078a, 0x18168a55, 0x1800518b },
|
|
{ 4, 0x18402ecc, 0x184c078a, 0x18168a55, 0x1800519f },
|
|
{ 5, 0x18402ecc, 0x184c078e, 0x18168a55, 0x1800518b },
|
|
{ 6, 0x18402ecc, 0x184c078e, 0x18168a55, 0x1800519f },
|
|
{ 7, 0x18402ecc, 0x184c0792, 0x18168a55, 0x1800518b },
|
|
{ 8, 0x18402ecc, 0x184c0792, 0x18168a55, 0x1800519f },
|
|
{ 9, 0x18402ecc, 0x184c0796, 0x18168a55, 0x1800518b },
|
|
{ 10, 0x18402ecc, 0x184c0796, 0x18168a55, 0x1800519f },
|
|
{ 11, 0x18402ecc, 0x184c079a, 0x18168a55, 0x1800518b },
|
|
{ 12, 0x18402ecc, 0x184c079a, 0x18168a55, 0x1800519f },
|
|
{ 13, 0x18402ecc, 0x184c079e, 0x18168a55, 0x1800518b },
|
|
{ 14, 0x18402ecc, 0x184c07a2, 0x18168a55, 0x18005193 },
|
|
|
|
/* 802.11 UNI / HyperLan 2 */
|
|
{ 36, 0x18402ecc, 0x184c099a, 0x18158a55, 0x180ed1a3 },
|
|
{ 38, 0x18402ecc, 0x184c099e, 0x18158a55, 0x180ed193 },
|
|
{ 40, 0x18402ec8, 0x184c0682, 0x18158a55, 0x180ed183 },
|
|
{ 44, 0x18402ec8, 0x184c0682, 0x18158a55, 0x180ed1a3 },
|
|
{ 46, 0x18402ec8, 0x184c0686, 0x18158a55, 0x180ed18b },
|
|
{ 48, 0x18402ec8, 0x184c0686, 0x18158a55, 0x180ed19b },
|
|
{ 52, 0x18402ec8, 0x184c068a, 0x18158a55, 0x180ed193 },
|
|
{ 54, 0x18402ec8, 0x184c068a, 0x18158a55, 0x180ed1a3 },
|
|
{ 56, 0x18402ec8, 0x184c068e, 0x18158a55, 0x180ed18b },
|
|
{ 60, 0x18402ec8, 0x184c0692, 0x18158a55, 0x180ed183 },
|
|
{ 62, 0x18402ec8, 0x184c0692, 0x18158a55, 0x180ed193 },
|
|
{ 64, 0x18402ec8, 0x184c0692, 0x18158a55, 0x180ed1a3 },
|
|
|
|
/* 802.11 HyperLan 2 */
|
|
{ 100, 0x18402ec8, 0x184c06b2, 0x18178a55, 0x180ed783 },
|
|
{ 102, 0x18402ec8, 0x184c06b2, 0x18578a55, 0x180ed793 },
|
|
{ 104, 0x18402ec8, 0x185c06b2, 0x18578a55, 0x180ed1a3 },
|
|
{ 108, 0x18402ecc, 0x185c0a32, 0x18578a55, 0x180ed193 },
|
|
{ 110, 0x18402ecc, 0x184c0a36, 0x18178a55, 0x180ed183 },
|
|
{ 112, 0x18402ecc, 0x184c0a36, 0x18178a55, 0x180ed19b },
|
|
{ 116, 0x18402ecc, 0x184c0a3a, 0x18178a55, 0x180ed1a3 },
|
|
{ 118, 0x18402ecc, 0x184c0a3e, 0x18178a55, 0x180ed193 },
|
|
{ 120, 0x18402ec4, 0x184c0382, 0x18178a55, 0x180ed183 },
|
|
{ 124, 0x18402ec4, 0x184c0382, 0x18178a55, 0x180ed193 },
|
|
{ 126, 0x18402ec4, 0x184c0382, 0x18178a55, 0x180ed15b },
|
|
{ 128, 0x18402ec4, 0x184c0382, 0x18178a55, 0x180ed1a3 },
|
|
{ 132, 0x18402ec4, 0x184c0386, 0x18178a55, 0x180ed18b },
|
|
{ 134, 0x18402ec4, 0x184c0386, 0x18178a55, 0x180ed193 },
|
|
{ 136, 0x18402ec4, 0x184c0386, 0x18178a55, 0x180ed19b },
|
|
{ 140, 0x18402ec4, 0x184c038a, 0x18178a55, 0x180ed183 },
|
|
|
|
/* 802.11 UNII */
|
|
{ 149, 0x18402ec4, 0x184c038a, 0x18178a55, 0x180ed1a7 },
|
|
{ 151, 0x18402ec4, 0x184c038e, 0x18178a55, 0x180ed187 },
|
|
{ 153, 0x18402ec4, 0x184c038e, 0x18178a55, 0x180ed18f },
|
|
{ 157, 0x18402ec4, 0x184c038e, 0x18178a55, 0x180ed19f },
|
|
{ 159, 0x18402ec4, 0x184c038e, 0x18178a55, 0x180ed1a7 },
|
|
{ 161, 0x18402ec4, 0x184c0392, 0x18178a55, 0x180ed187 },
|
|
{ 165, 0x18402ec4, 0x184c0392, 0x18178a55, 0x180ed197 },
|
|
{ 167, 0x18402ec4, 0x184c03d2, 0x18179855, 0x1815531f },
|
|
{ 169, 0x18402ec4, 0x184c03d2, 0x18179855, 0x18155327 },
|
|
{ 171, 0x18402ec4, 0x184c03d6, 0x18179855, 0x18155307 },
|
|
{ 173, 0x18402ec4, 0x184c03d6, 0x18179855, 0x1815530f },
|
|
|
|
/* 802.11 Japan */
|
|
{ 184, 0x15002ccc, 0x1500491e, 0x1509be55, 0x150c0a0b },
|
|
{ 188, 0x15002ccc, 0x15004922, 0x1509be55, 0x150c0a13 },
|
|
{ 192, 0x15002ccc, 0x15004926, 0x1509be55, 0x150c0a1b },
|
|
{ 196, 0x15002ccc, 0x1500492a, 0x1509be55, 0x150c0a23 },
|
|
{ 208, 0x15002ccc, 0x1500493a, 0x1509be55, 0x150c0a13 },
|
|
{ 212, 0x15002ccc, 0x1500493e, 0x1509be55, 0x150c0a1b },
|
|
{ 216, 0x15002ccc, 0x15004982, 0x1509be55, 0x150c0a23 },
|
|
};
|
|
|
|
/*
|
|
* RF value list for rt3xxx
|
|
* Supports: 2.4 GHz (all) & 5.2 GHz (RF3052 & RF3053)
|
|
*/
|
|
static const struct rf_channel rf_vals_3x[] = {
|
|
{1, 241, 2, 2 },
|
|
{2, 241, 2, 7 },
|
|
{3, 242, 2, 2 },
|
|
{4, 242, 2, 7 },
|
|
{5, 243, 2, 2 },
|
|
{6, 243, 2, 7 },
|
|
{7, 244, 2, 2 },
|
|
{8, 244, 2, 7 },
|
|
{9, 245, 2, 2 },
|
|
{10, 245, 2, 7 },
|
|
{11, 246, 2, 2 },
|
|
{12, 246, 2, 7 },
|
|
{13, 247, 2, 2 },
|
|
{14, 248, 2, 4 },
|
|
|
|
/* 802.11 UNI / HyperLan 2 */
|
|
{36, 0x56, 0, 4},
|
|
{38, 0x56, 0, 6},
|
|
{40, 0x56, 0, 8},
|
|
{44, 0x57, 0, 0},
|
|
{46, 0x57, 0, 2},
|
|
{48, 0x57, 0, 4},
|
|
{52, 0x57, 0, 8},
|
|
{54, 0x57, 0, 10},
|
|
{56, 0x58, 0, 0},
|
|
{60, 0x58, 0, 4},
|
|
{62, 0x58, 0, 6},
|
|
{64, 0x58, 0, 8},
|
|
|
|
/* 802.11 HyperLan 2 */
|
|
{100, 0x5b, 0, 8},
|
|
{102, 0x5b, 0, 10},
|
|
{104, 0x5c, 0, 0},
|
|
{108, 0x5c, 0, 4},
|
|
{110, 0x5c, 0, 6},
|
|
{112, 0x5c, 0, 8},
|
|
{116, 0x5d, 0, 0},
|
|
{118, 0x5d, 0, 2},
|
|
{120, 0x5d, 0, 4},
|
|
{124, 0x5d, 0, 8},
|
|
{126, 0x5d, 0, 10},
|
|
{128, 0x5e, 0, 0},
|
|
{132, 0x5e, 0, 4},
|
|
{134, 0x5e, 0, 6},
|
|
{136, 0x5e, 0, 8},
|
|
{140, 0x5f, 0, 0},
|
|
|
|
/* 802.11 UNII */
|
|
{149, 0x5f, 0, 9},
|
|
{151, 0x5f, 0, 11},
|
|
{153, 0x60, 0, 1},
|
|
{157, 0x60, 0, 5},
|
|
{159, 0x60, 0, 7},
|
|
{161, 0x60, 0, 9},
|
|
{165, 0x61, 0, 1},
|
|
{167, 0x61, 0, 3},
|
|
{169, 0x61, 0, 5},
|
|
{171, 0x61, 0, 7},
|
|
{173, 0x61, 0, 9},
|
|
};
|
|
|
|
/*
|
|
* RF value list for rt3xxx with Xtal20MHz
|
|
* Supports: 2.4 GHz (all) (RF3322)
|
|
*/
|
|
static const struct rf_channel rf_vals_3x_xtal20[] = {
|
|
{1, 0xE2, 2, 0x14},
|
|
{2, 0xE3, 2, 0x14},
|
|
{3, 0xE4, 2, 0x14},
|
|
{4, 0xE5, 2, 0x14},
|
|
{5, 0xE6, 2, 0x14},
|
|
{6, 0xE7, 2, 0x14},
|
|
{7, 0xE8, 2, 0x14},
|
|
{8, 0xE9, 2, 0x14},
|
|
{9, 0xEA, 2, 0x14},
|
|
{10, 0xEB, 2, 0x14},
|
|
{11, 0xEC, 2, 0x14},
|
|
{12, 0xED, 2, 0x14},
|
|
{13, 0xEE, 2, 0x14},
|
|
{14, 0xF0, 2, 0x18},
|
|
};
|
|
|
|
static const struct rf_channel rf_vals_3853[] = {
|
|
{1, 241, 6, 2},
|
|
{2, 241, 6, 7},
|
|
{3, 242, 6, 2},
|
|
{4, 242, 6, 7},
|
|
{5, 243, 6, 2},
|
|
{6, 243, 6, 7},
|
|
{7, 244, 6, 2},
|
|
{8, 244, 6, 7},
|
|
{9, 245, 6, 2},
|
|
{10, 245, 6, 7},
|
|
{11, 246, 6, 2},
|
|
{12, 246, 6, 7},
|
|
{13, 247, 6, 2},
|
|
{14, 248, 6, 4},
|
|
|
|
{36, 0x56, 8, 4},
|
|
{38, 0x56, 8, 6},
|
|
{40, 0x56, 8, 8},
|
|
{44, 0x57, 8, 0},
|
|
{46, 0x57, 8, 2},
|
|
{48, 0x57, 8, 4},
|
|
{52, 0x57, 8, 8},
|
|
{54, 0x57, 8, 10},
|
|
{56, 0x58, 8, 0},
|
|
{60, 0x58, 8, 4},
|
|
{62, 0x58, 8, 6},
|
|
{64, 0x58, 8, 8},
|
|
|
|
{100, 0x5b, 8, 8},
|
|
{102, 0x5b, 8, 10},
|
|
{104, 0x5c, 8, 0},
|
|
{108, 0x5c, 8, 4},
|
|
{110, 0x5c, 8, 6},
|
|
{112, 0x5c, 8, 8},
|
|
{114, 0x5c, 8, 10},
|
|
{116, 0x5d, 8, 0},
|
|
{118, 0x5d, 8, 2},
|
|
{120, 0x5d, 8, 4},
|
|
{124, 0x5d, 8, 8},
|
|
{126, 0x5d, 8, 10},
|
|
{128, 0x5e, 8, 0},
|
|
{132, 0x5e, 8, 4},
|
|
{134, 0x5e, 8, 6},
|
|
{136, 0x5e, 8, 8},
|
|
{140, 0x5f, 8, 0},
|
|
|
|
{149, 0x5f, 8, 9},
|
|
{151, 0x5f, 8, 11},
|
|
{153, 0x60, 8, 1},
|
|
{157, 0x60, 8, 5},
|
|
{159, 0x60, 8, 7},
|
|
{161, 0x60, 8, 9},
|
|
{165, 0x61, 8, 1},
|
|
{167, 0x61, 8, 3},
|
|
{169, 0x61, 8, 5},
|
|
{171, 0x61, 8, 7},
|
|
{173, 0x61, 8, 9},
|
|
};
|
|
|
|
static const struct rf_channel rf_vals_5592_xtal20[] = {
|
|
/* Channel, N, K, mod, R */
|
|
{1, 482, 4, 10, 3},
|
|
{2, 483, 4, 10, 3},
|
|
{3, 484, 4, 10, 3},
|
|
{4, 485, 4, 10, 3},
|
|
{5, 486, 4, 10, 3},
|
|
{6, 487, 4, 10, 3},
|
|
{7, 488, 4, 10, 3},
|
|
{8, 489, 4, 10, 3},
|
|
{9, 490, 4, 10, 3},
|
|
{10, 491, 4, 10, 3},
|
|
{11, 492, 4, 10, 3},
|
|
{12, 493, 4, 10, 3},
|
|
{13, 494, 4, 10, 3},
|
|
{14, 496, 8, 10, 3},
|
|
{36, 172, 8, 12, 1},
|
|
{38, 173, 0, 12, 1},
|
|
{40, 173, 4, 12, 1},
|
|
{42, 173, 8, 12, 1},
|
|
{44, 174, 0, 12, 1},
|
|
{46, 174, 4, 12, 1},
|
|
{48, 174, 8, 12, 1},
|
|
{50, 175, 0, 12, 1},
|
|
{52, 175, 4, 12, 1},
|
|
{54, 175, 8, 12, 1},
|
|
{56, 176, 0, 12, 1},
|
|
{58, 176, 4, 12, 1},
|
|
{60, 176, 8, 12, 1},
|
|
{62, 177, 0, 12, 1},
|
|
{64, 177, 4, 12, 1},
|
|
{100, 183, 4, 12, 1},
|
|
{102, 183, 8, 12, 1},
|
|
{104, 184, 0, 12, 1},
|
|
{106, 184, 4, 12, 1},
|
|
{108, 184, 8, 12, 1},
|
|
{110, 185, 0, 12, 1},
|
|
{112, 185, 4, 12, 1},
|
|
{114, 185, 8, 12, 1},
|
|
{116, 186, 0, 12, 1},
|
|
{118, 186, 4, 12, 1},
|
|
{120, 186, 8, 12, 1},
|
|
{122, 187, 0, 12, 1},
|
|
{124, 187, 4, 12, 1},
|
|
{126, 187, 8, 12, 1},
|
|
{128, 188, 0, 12, 1},
|
|
{130, 188, 4, 12, 1},
|
|
{132, 188, 8, 12, 1},
|
|
{134, 189, 0, 12, 1},
|
|
{136, 189, 4, 12, 1},
|
|
{138, 189, 8, 12, 1},
|
|
{140, 190, 0, 12, 1},
|
|
{149, 191, 6, 12, 1},
|
|
{151, 191, 10, 12, 1},
|
|
{153, 192, 2, 12, 1},
|
|
{155, 192, 6, 12, 1},
|
|
{157, 192, 10, 12, 1},
|
|
{159, 193, 2, 12, 1},
|
|
{161, 193, 6, 12, 1},
|
|
{165, 194, 2, 12, 1},
|
|
{184, 164, 0, 12, 1},
|
|
{188, 164, 4, 12, 1},
|
|
{192, 165, 8, 12, 1},
|
|
{196, 166, 0, 12, 1},
|
|
};
|
|
|
|
static const struct rf_channel rf_vals_5592_xtal40[] = {
|
|
/* Channel, N, K, mod, R */
|
|
{1, 241, 2, 10, 3},
|
|
{2, 241, 7, 10, 3},
|
|
{3, 242, 2, 10, 3},
|
|
{4, 242, 7, 10, 3},
|
|
{5, 243, 2, 10, 3},
|
|
{6, 243, 7, 10, 3},
|
|
{7, 244, 2, 10, 3},
|
|
{8, 244, 7, 10, 3},
|
|
{9, 245, 2, 10, 3},
|
|
{10, 245, 7, 10, 3},
|
|
{11, 246, 2, 10, 3},
|
|
{12, 246, 7, 10, 3},
|
|
{13, 247, 2, 10, 3},
|
|
{14, 248, 4, 10, 3},
|
|
{36, 86, 4, 12, 1},
|
|
{38, 86, 6, 12, 1},
|
|
{40, 86, 8, 12, 1},
|
|
{42, 86, 10, 12, 1},
|
|
{44, 87, 0, 12, 1},
|
|
{46, 87, 2, 12, 1},
|
|
{48, 87, 4, 12, 1},
|
|
{50, 87, 6, 12, 1},
|
|
{52, 87, 8, 12, 1},
|
|
{54, 87, 10, 12, 1},
|
|
{56, 88, 0, 12, 1},
|
|
{58, 88, 2, 12, 1},
|
|
{60, 88, 4, 12, 1},
|
|
{62, 88, 6, 12, 1},
|
|
{64, 88, 8, 12, 1},
|
|
{100, 91, 8, 12, 1},
|
|
{102, 91, 10, 12, 1},
|
|
{104, 92, 0, 12, 1},
|
|
{106, 92, 2, 12, 1},
|
|
{108, 92, 4, 12, 1},
|
|
{110, 92, 6, 12, 1},
|
|
{112, 92, 8, 12, 1},
|
|
{114, 92, 10, 12, 1},
|
|
{116, 93, 0, 12, 1},
|
|
{118, 93, 2, 12, 1},
|
|
{120, 93, 4, 12, 1},
|
|
{122, 93, 6, 12, 1},
|
|
{124, 93, 8, 12, 1},
|
|
{126, 93, 10, 12, 1},
|
|
{128, 94, 0, 12, 1},
|
|
{130, 94, 2, 12, 1},
|
|
{132, 94, 4, 12, 1},
|
|
{134, 94, 6, 12, 1},
|
|
{136, 94, 8, 12, 1},
|
|
{138, 94, 10, 12, 1},
|
|
{140, 95, 0, 12, 1},
|
|
{149, 95, 9, 12, 1},
|
|
{151, 95, 11, 12, 1},
|
|
{153, 96, 1, 12, 1},
|
|
{155, 96, 3, 12, 1},
|
|
{157, 96, 5, 12, 1},
|
|
{159, 96, 7, 12, 1},
|
|
{161, 96, 9, 12, 1},
|
|
{165, 97, 1, 12, 1},
|
|
{184, 82, 0, 12, 1},
|
|
{188, 82, 4, 12, 1},
|
|
{192, 82, 8, 12, 1},
|
|
{196, 83, 0, 12, 1},
|
|
};
|
|
|
|
static const struct rf_channel rf_vals_7620[] = {
|
|
{1, 0x50, 0x99, 0x99, 1},
|
|
{2, 0x50, 0x44, 0x44, 2},
|
|
{3, 0x50, 0xEE, 0xEE, 2},
|
|
{4, 0x50, 0x99, 0x99, 3},
|
|
{5, 0x51, 0x44, 0x44, 0},
|
|
{6, 0x51, 0xEE, 0xEE, 0},
|
|
{7, 0x51, 0x99, 0x99, 1},
|
|
{8, 0x51, 0x44, 0x44, 2},
|
|
{9, 0x51, 0xEE, 0xEE, 2},
|
|
{10, 0x51, 0x99, 0x99, 3},
|
|
{11, 0x52, 0x44, 0x44, 0},
|
|
{12, 0x52, 0xEE, 0xEE, 0},
|
|
{13, 0x52, 0x99, 0x99, 1},
|
|
{14, 0x52, 0x33, 0x33, 3},
|
|
};
|
|
|
|
static int rt2800_probe_hw_mode(struct rt2x00_dev *rt2x00dev)
|
|
{
|
|
struct hw_mode_spec *spec = &rt2x00dev->spec;
|
|
struct channel_info *info;
|
|
s8 *default_power1;
|
|
s8 *default_power2;
|
|
s8 *default_power3;
|
|
unsigned int i, tx_chains, rx_chains;
|
|
u32 reg;
|
|
|
|
/*
|
|
* Disable powersaving as default.
|
|
*/
|
|
rt2x00dev->hw->wiphy->flags &= ~WIPHY_FLAG_PS_ON_BY_DEFAULT;
|
|
|
|
/*
|
|
* Change default retry settings to values corresponding more closely
|
|
* to rate[0].count setting of minstrel rate control algorithm.
|
|
*/
|
|
rt2x00dev->hw->wiphy->retry_short = 2;
|
|
rt2x00dev->hw->wiphy->retry_long = 2;
|
|
|
|
/*
|
|
* Initialize all hw fields.
|
|
*/
|
|
ieee80211_hw_set(rt2x00dev->hw, REPORTS_TX_ACK_STATUS);
|
|
ieee80211_hw_set(rt2x00dev->hw, AMPDU_AGGREGATION);
|
|
ieee80211_hw_set(rt2x00dev->hw, PS_NULLFUNC_STACK);
|
|
ieee80211_hw_set(rt2x00dev->hw, SIGNAL_DBM);
|
|
ieee80211_hw_set(rt2x00dev->hw, SUPPORTS_PS);
|
|
|
|
/*
|
|
* Don't set IEEE80211_HW_HOST_BROADCAST_PS_BUFFERING for USB devices
|
|
* unless we are capable of sending the buffered frames out after the
|
|
* DTIM transmission using rt2x00lib_beacondone. This will send out
|
|
* multicast and broadcast traffic immediately instead of buffering it
|
|
* infinitly and thus dropping it after some time.
|
|
*/
|
|
if (!rt2x00_is_usb(rt2x00dev))
|
|
ieee80211_hw_set(rt2x00dev->hw, HOST_BROADCAST_PS_BUFFERING);
|
|
|
|
ieee80211_hw_set(rt2x00dev->hw, MFP_CAPABLE);
|
|
|
|
SET_IEEE80211_DEV(rt2x00dev->hw, rt2x00dev->dev);
|
|
SET_IEEE80211_PERM_ADDR(rt2x00dev->hw,
|
|
rt2800_eeprom_addr(rt2x00dev,
|
|
EEPROM_MAC_ADDR_0));
|
|
|
|
/*
|
|
* As rt2800 has a global fallback table we cannot specify
|
|
* more then one tx rate per frame but since the hw will
|
|
* try several rates (based on the fallback table) we should
|
|
* initialize max_report_rates to the maximum number of rates
|
|
* we are going to try. Otherwise mac80211 will truncate our
|
|
* reported tx rates and the rc algortihm will end up with
|
|
* incorrect data.
|
|
*/
|
|
rt2x00dev->hw->max_rates = 1;
|
|
rt2x00dev->hw->max_report_rates = 7;
|
|
rt2x00dev->hw->max_rate_tries = 1;
|
|
|
|
/*
|
|
* Initialize hw_mode information.
|
|
*/
|
|
spec->supported_rates = SUPPORT_RATE_CCK | SUPPORT_RATE_OFDM;
|
|
|
|
switch (rt2x00dev->chip.rf) {
|
|
case RF2720:
|
|
case RF2820:
|
|
spec->num_channels = 14;
|
|
spec->channels = rf_vals;
|
|
break;
|
|
|
|
case RF2750:
|
|
case RF2850:
|
|
spec->num_channels = ARRAY_SIZE(rf_vals);
|
|
spec->channels = rf_vals;
|
|
break;
|
|
|
|
case RF2020:
|
|
case RF3020:
|
|
case RF3021:
|
|
case RF3022:
|
|
case RF3070:
|
|
case RF3290:
|
|
case RF3320:
|
|
case RF3322:
|
|
case RF5350:
|
|
case RF5360:
|
|
case RF5362:
|
|
case RF5370:
|
|
case RF5372:
|
|
case RF5390:
|
|
case RF5392:
|
|
spec->num_channels = 14;
|
|
if (rt2800_clk_is_20mhz(rt2x00dev))
|
|
spec->channels = rf_vals_3x_xtal20;
|
|
else
|
|
spec->channels = rf_vals_3x;
|
|
break;
|
|
|
|
case RF7620:
|
|
spec->num_channels = ARRAY_SIZE(rf_vals_7620);
|
|
spec->channels = rf_vals_7620;
|
|
break;
|
|
|
|
case RF3052:
|
|
case RF3053:
|
|
spec->num_channels = ARRAY_SIZE(rf_vals_3x);
|
|
spec->channels = rf_vals_3x;
|
|
break;
|
|
|
|
case RF3853:
|
|
spec->num_channels = ARRAY_SIZE(rf_vals_3853);
|
|
spec->channels = rf_vals_3853;
|
|
break;
|
|
|
|
case RF5592:
|
|
reg = rt2800_register_read(rt2x00dev, MAC_DEBUG_INDEX);
|
|
if (rt2x00_get_field32(reg, MAC_DEBUG_INDEX_XTAL)) {
|
|
spec->num_channels = ARRAY_SIZE(rf_vals_5592_xtal40);
|
|
spec->channels = rf_vals_5592_xtal40;
|
|
} else {
|
|
spec->num_channels = ARRAY_SIZE(rf_vals_5592_xtal20);
|
|
spec->channels = rf_vals_5592_xtal20;
|
|
}
|
|
break;
|
|
}
|
|
|
|
if (WARN_ON_ONCE(!spec->channels))
|
|
return -ENODEV;
|
|
|
|
spec->supported_bands = SUPPORT_BAND_2GHZ;
|
|
if (spec->num_channels > 14)
|
|
spec->supported_bands |= SUPPORT_BAND_5GHZ;
|
|
|
|
/*
|
|
* Initialize HT information.
|
|
*/
|
|
if (!rt2x00_rf(rt2x00dev, RF2020))
|
|
spec->ht.ht_supported = true;
|
|
else
|
|
spec->ht.ht_supported = false;
|
|
|
|
spec->ht.cap =
|
|
IEEE80211_HT_CAP_SUP_WIDTH_20_40 |
|
|
IEEE80211_HT_CAP_GRN_FLD |
|
|
IEEE80211_HT_CAP_SGI_20 |
|
|
IEEE80211_HT_CAP_SGI_40;
|
|
|
|
tx_chains = rt2x00dev->default_ant.tx_chain_num;
|
|
rx_chains = rt2x00dev->default_ant.rx_chain_num;
|
|
|
|
if (tx_chains >= 2)
|
|
spec->ht.cap |= IEEE80211_HT_CAP_TX_STBC;
|
|
|
|
spec->ht.cap |= rx_chains << IEEE80211_HT_CAP_RX_STBC_SHIFT;
|
|
|
|
spec->ht.ampdu_factor = (rx_chains > 1) ? 3 : 2;
|
|
spec->ht.ampdu_density = 4;
|
|
spec->ht.mcs.tx_params = IEEE80211_HT_MCS_TX_DEFINED;
|
|
if (tx_chains != rx_chains) {
|
|
spec->ht.mcs.tx_params |= IEEE80211_HT_MCS_TX_RX_DIFF;
|
|
spec->ht.mcs.tx_params |=
|
|
(tx_chains - 1) << IEEE80211_HT_MCS_TX_MAX_STREAMS_SHIFT;
|
|
}
|
|
|
|
switch (rx_chains) {
|
|
case 3:
|
|
spec->ht.mcs.rx_mask[2] = 0xff;
|
|
fallthrough;
|
|
case 2:
|
|
spec->ht.mcs.rx_mask[1] = 0xff;
|
|
fallthrough;
|
|
case 1:
|
|
spec->ht.mcs.rx_mask[0] = 0xff;
|
|
spec->ht.mcs.rx_mask[4] = 0x1; /* MCS32 */
|
|
break;
|
|
}
|
|
|
|
/*
|
|
* Create channel information and survey arrays
|
|
*/
|
|
info = kcalloc(spec->num_channels, sizeof(*info), GFP_KERNEL);
|
|
if (!info)
|
|
return -ENOMEM;
|
|
|
|
rt2x00dev->chan_survey =
|
|
kcalloc(spec->num_channels, sizeof(struct rt2x00_chan_survey),
|
|
GFP_KERNEL);
|
|
if (!rt2x00dev->chan_survey) {
|
|
kfree(info);
|
|
return -ENOMEM;
|
|
}
|
|
|
|
spec->channels_info = info;
|
|
|
|
default_power1 = rt2800_eeprom_addr(rt2x00dev, EEPROM_TXPOWER_BG1);
|
|
default_power2 = rt2800_eeprom_addr(rt2x00dev, EEPROM_TXPOWER_BG2);
|
|
|
|
if (rt2x00dev->default_ant.tx_chain_num > 2)
|
|
default_power3 = rt2800_eeprom_addr(rt2x00dev,
|
|
EEPROM_EXT_TXPOWER_BG3);
|
|
else
|
|
default_power3 = NULL;
|
|
|
|
for (i = 0; i < 14; i++) {
|
|
info[i].default_power1 = default_power1[i];
|
|
info[i].default_power2 = default_power2[i];
|
|
if (default_power3)
|
|
info[i].default_power3 = default_power3[i];
|
|
}
|
|
|
|
if (spec->num_channels > 14) {
|
|
default_power1 = rt2800_eeprom_addr(rt2x00dev,
|
|
EEPROM_TXPOWER_A1);
|
|
default_power2 = rt2800_eeprom_addr(rt2x00dev,
|
|
EEPROM_TXPOWER_A2);
|
|
|
|
if (rt2x00dev->default_ant.tx_chain_num > 2)
|
|
default_power3 =
|
|
rt2800_eeprom_addr(rt2x00dev,
|
|
EEPROM_EXT_TXPOWER_A3);
|
|
else
|
|
default_power3 = NULL;
|
|
|
|
for (i = 14; i < spec->num_channels; i++) {
|
|
info[i].default_power1 = default_power1[i - 14];
|
|
info[i].default_power2 = default_power2[i - 14];
|
|
if (default_power3)
|
|
info[i].default_power3 = default_power3[i - 14];
|
|
}
|
|
}
|
|
|
|
switch (rt2x00dev->chip.rf) {
|
|
case RF2020:
|
|
case RF3020:
|
|
case RF3021:
|
|
case RF3022:
|
|
case RF3320:
|
|
case RF3052:
|
|
case RF3053:
|
|
case RF3070:
|
|
case RF3290:
|
|
case RF3853:
|
|
case RF5350:
|
|
case RF5360:
|
|
case RF5362:
|
|
case RF5370:
|
|
case RF5372:
|
|
case RF5390:
|
|
case RF5392:
|
|
case RF5592:
|
|
case RF7620:
|
|
__set_bit(CAPABILITY_VCO_RECALIBRATION, &rt2x00dev->cap_flags);
|
|
break;
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int rt2800_probe_rt(struct rt2x00_dev *rt2x00dev)
|
|
{
|
|
u32 reg;
|
|
u32 rt;
|
|
u32 rev;
|
|
|
|
if (rt2x00_rt(rt2x00dev, RT3290))
|
|
reg = rt2800_register_read(rt2x00dev, MAC_CSR0_3290);
|
|
else
|
|
reg = rt2800_register_read(rt2x00dev, MAC_CSR0);
|
|
|
|
rt = rt2x00_get_field32(reg, MAC_CSR0_CHIPSET);
|
|
rev = rt2x00_get_field32(reg, MAC_CSR0_REVISION);
|
|
|
|
switch (rt) {
|
|
case RT2860:
|
|
case RT2872:
|
|
case RT2883:
|
|
case RT3070:
|
|
case RT3071:
|
|
case RT3090:
|
|
case RT3290:
|
|
case RT3352:
|
|
case RT3390:
|
|
case RT3572:
|
|
case RT3593:
|
|
case RT3883:
|
|
case RT5350:
|
|
case RT5390:
|
|
case RT5392:
|
|
case RT5592:
|
|
break;
|
|
default:
|
|
rt2x00_err(rt2x00dev, "Invalid RT chipset 0x%04x, rev %04x detected\n",
|
|
rt, rev);
|
|
return -ENODEV;
|
|
}
|
|
|
|
if (rt == RT5390 && rt2x00_is_soc(rt2x00dev))
|
|
rt = RT6352;
|
|
|
|
rt2x00_set_rt(rt2x00dev, rt, rev);
|
|
|
|
return 0;
|
|
}
|
|
|
|
int rt2800_probe_hw(struct rt2x00_dev *rt2x00dev)
|
|
{
|
|
int retval;
|
|
u32 reg;
|
|
|
|
retval = rt2800_probe_rt(rt2x00dev);
|
|
if (retval)
|
|
return retval;
|
|
|
|
/*
|
|
* Allocate eeprom data.
|
|
*/
|
|
retval = rt2800_validate_eeprom(rt2x00dev);
|
|
if (retval)
|
|
return retval;
|
|
|
|
retval = rt2800_init_eeprom(rt2x00dev);
|
|
if (retval)
|
|
return retval;
|
|
|
|
/*
|
|
* Enable rfkill polling by setting GPIO direction of the
|
|
* rfkill switch GPIO pin correctly.
|
|
*/
|
|
reg = rt2800_register_read(rt2x00dev, GPIO_CTRL);
|
|
rt2x00_set_field32(®, GPIO_CTRL_DIR2, 1);
|
|
rt2800_register_write(rt2x00dev, GPIO_CTRL, reg);
|
|
|
|
/*
|
|
* Initialize hw specifications.
|
|
*/
|
|
retval = rt2800_probe_hw_mode(rt2x00dev);
|
|
if (retval)
|
|
return retval;
|
|
|
|
/*
|
|
* Set device capabilities.
|
|
*/
|
|
__set_bit(CAPABILITY_CONTROL_FILTERS, &rt2x00dev->cap_flags);
|
|
__set_bit(CAPABILITY_CONTROL_FILTER_PSPOLL, &rt2x00dev->cap_flags);
|
|
if (!rt2x00_is_usb(rt2x00dev))
|
|
__set_bit(CAPABILITY_PRE_TBTT_INTERRUPT, &rt2x00dev->cap_flags);
|
|
|
|
/*
|
|
* Set device requirements.
|
|
*/
|
|
if (!rt2x00_is_soc(rt2x00dev))
|
|
__set_bit(REQUIRE_FIRMWARE, &rt2x00dev->cap_flags);
|
|
__set_bit(REQUIRE_L2PAD, &rt2x00dev->cap_flags);
|
|
__set_bit(REQUIRE_TXSTATUS_FIFO, &rt2x00dev->cap_flags);
|
|
if (!rt2800_hwcrypt_disabled(rt2x00dev))
|
|
__set_bit(CAPABILITY_HW_CRYPTO, &rt2x00dev->cap_flags);
|
|
__set_bit(CAPABILITY_LINK_TUNING, &rt2x00dev->cap_flags);
|
|
__set_bit(REQUIRE_HT_TX_DESC, &rt2x00dev->cap_flags);
|
|
if (rt2x00_is_usb(rt2x00dev))
|
|
__set_bit(REQUIRE_PS_AUTOWAKE, &rt2x00dev->cap_flags);
|
|
else {
|
|
__set_bit(REQUIRE_DMA, &rt2x00dev->cap_flags);
|
|
__set_bit(REQUIRE_TASKLET_CONTEXT, &rt2x00dev->cap_flags);
|
|
}
|
|
|
|
if (modparam_watchdog) {
|
|
__set_bit(CAPABILITY_RESTART_HW, &rt2x00dev->cap_flags);
|
|
rt2x00dev->link.watchdog_interval = msecs_to_jiffies(100);
|
|
} else {
|
|
rt2x00dev->link.watchdog_disabled = true;
|
|
}
|
|
|
|
/*
|
|
* Set the rssi offset.
|
|
*/
|
|
rt2x00dev->rssi_offset = DEFAULT_RSSI_OFFSET;
|
|
|
|
return 0;
|
|
}
|
|
EXPORT_SYMBOL_GPL(rt2800_probe_hw);
|
|
|
|
/*
|
|
* IEEE80211 stack callback functions.
|
|
*/
|
|
void rt2800_get_key_seq(struct ieee80211_hw *hw,
|
|
struct ieee80211_key_conf *key,
|
|
struct ieee80211_key_seq *seq)
|
|
{
|
|
struct rt2x00_dev *rt2x00dev = hw->priv;
|
|
struct mac_iveiv_entry iveiv_entry;
|
|
u32 offset;
|
|
|
|
if (key->cipher != WLAN_CIPHER_SUITE_TKIP)
|
|
return;
|
|
|
|
offset = MAC_IVEIV_ENTRY(key->hw_key_idx);
|
|
rt2800_register_multiread(rt2x00dev, offset,
|
|
&iveiv_entry, sizeof(iveiv_entry));
|
|
|
|
memcpy(&seq->tkip.iv16, &iveiv_entry.iv[0], 2);
|
|
memcpy(&seq->tkip.iv32, &iveiv_entry.iv[4], 4);
|
|
}
|
|
EXPORT_SYMBOL_GPL(rt2800_get_key_seq);
|
|
|
|
int rt2800_set_rts_threshold(struct ieee80211_hw *hw, u32 value)
|
|
{
|
|
struct rt2x00_dev *rt2x00dev = hw->priv;
|
|
u32 reg;
|
|
bool enabled = (value < IEEE80211_MAX_RTS_THRESHOLD);
|
|
|
|
reg = rt2800_register_read(rt2x00dev, TX_RTS_CFG);
|
|
rt2x00_set_field32(®, TX_RTS_CFG_RTS_THRES, value);
|
|
rt2800_register_write(rt2x00dev, TX_RTS_CFG, reg);
|
|
|
|
reg = rt2800_register_read(rt2x00dev, CCK_PROT_CFG);
|
|
rt2x00_set_field32(®, CCK_PROT_CFG_RTS_TH_EN, enabled);
|
|
rt2800_register_write(rt2x00dev, CCK_PROT_CFG, reg);
|
|
|
|
reg = rt2800_register_read(rt2x00dev, OFDM_PROT_CFG);
|
|
rt2x00_set_field32(®, OFDM_PROT_CFG_RTS_TH_EN, enabled);
|
|
rt2800_register_write(rt2x00dev, OFDM_PROT_CFG, reg);
|
|
|
|
reg = rt2800_register_read(rt2x00dev, MM20_PROT_CFG);
|
|
rt2x00_set_field32(®, MM20_PROT_CFG_RTS_TH_EN, enabled);
|
|
rt2800_register_write(rt2x00dev, MM20_PROT_CFG, reg);
|
|
|
|
reg = rt2800_register_read(rt2x00dev, MM40_PROT_CFG);
|
|
rt2x00_set_field32(®, MM40_PROT_CFG_RTS_TH_EN, enabled);
|
|
rt2800_register_write(rt2x00dev, MM40_PROT_CFG, reg);
|
|
|
|
reg = rt2800_register_read(rt2x00dev, GF20_PROT_CFG);
|
|
rt2x00_set_field32(®, GF20_PROT_CFG_RTS_TH_EN, enabled);
|
|
rt2800_register_write(rt2x00dev, GF20_PROT_CFG, reg);
|
|
|
|
reg = rt2800_register_read(rt2x00dev, GF40_PROT_CFG);
|
|
rt2x00_set_field32(®, GF40_PROT_CFG_RTS_TH_EN, enabled);
|
|
rt2800_register_write(rt2x00dev, GF40_PROT_CFG, reg);
|
|
|
|
return 0;
|
|
}
|
|
EXPORT_SYMBOL_GPL(rt2800_set_rts_threshold);
|
|
|
|
int rt2800_conf_tx(struct ieee80211_hw *hw,
|
|
struct ieee80211_vif *vif,
|
|
unsigned int link_id, u16 queue_idx,
|
|
const struct ieee80211_tx_queue_params *params)
|
|
{
|
|
struct rt2x00_dev *rt2x00dev = hw->priv;
|
|
struct data_queue *queue;
|
|
struct rt2x00_field32 field;
|
|
int retval;
|
|
u32 reg;
|
|
u32 offset;
|
|
|
|
/*
|
|
* First pass the configuration through rt2x00lib, that will
|
|
* update the queue settings and validate the input. After that
|
|
* we are free to update the registers based on the value
|
|
* in the queue parameter.
|
|
*/
|
|
retval = rt2x00mac_conf_tx(hw, vif, link_id, queue_idx, params);
|
|
if (retval)
|
|
return retval;
|
|
|
|
/*
|
|
* We only need to perform additional register initialization
|
|
* for WMM queues/
|
|
*/
|
|
if (queue_idx >= 4)
|
|
return 0;
|
|
|
|
queue = rt2x00queue_get_tx_queue(rt2x00dev, queue_idx);
|
|
|
|
/* Update WMM TXOP register */
|
|
offset = WMM_TXOP0_CFG + (sizeof(u32) * (!!(queue_idx & 2)));
|
|
field.bit_offset = (queue_idx & 1) * 16;
|
|
field.bit_mask = 0xffff << field.bit_offset;
|
|
|
|
reg = rt2800_register_read(rt2x00dev, offset);
|
|
rt2x00_set_field32(®, field, queue->txop);
|
|
rt2800_register_write(rt2x00dev, offset, reg);
|
|
|
|
/* Update WMM registers */
|
|
field.bit_offset = queue_idx * 4;
|
|
field.bit_mask = 0xf << field.bit_offset;
|
|
|
|
reg = rt2800_register_read(rt2x00dev, WMM_AIFSN_CFG);
|
|
rt2x00_set_field32(®, field, queue->aifs);
|
|
rt2800_register_write(rt2x00dev, WMM_AIFSN_CFG, reg);
|
|
|
|
reg = rt2800_register_read(rt2x00dev, WMM_CWMIN_CFG);
|
|
rt2x00_set_field32(®, field, queue->cw_min);
|
|
rt2800_register_write(rt2x00dev, WMM_CWMIN_CFG, reg);
|
|
|
|
reg = rt2800_register_read(rt2x00dev, WMM_CWMAX_CFG);
|
|
rt2x00_set_field32(®, field, queue->cw_max);
|
|
rt2800_register_write(rt2x00dev, WMM_CWMAX_CFG, reg);
|
|
|
|
/* Update EDCA registers */
|
|
offset = EDCA_AC0_CFG + (sizeof(u32) * queue_idx);
|
|
|
|
reg = rt2800_register_read(rt2x00dev, offset);
|
|
rt2x00_set_field32(®, EDCA_AC0_CFG_TX_OP, queue->txop);
|
|
rt2x00_set_field32(®, EDCA_AC0_CFG_AIFSN, queue->aifs);
|
|
rt2x00_set_field32(®, EDCA_AC0_CFG_CWMIN, queue->cw_min);
|
|
rt2x00_set_field32(®, EDCA_AC0_CFG_CWMAX, queue->cw_max);
|
|
rt2800_register_write(rt2x00dev, offset, reg);
|
|
|
|
return 0;
|
|
}
|
|
EXPORT_SYMBOL_GPL(rt2800_conf_tx);
|
|
|
|
u64 rt2800_get_tsf(struct ieee80211_hw *hw, struct ieee80211_vif *vif)
|
|
{
|
|
struct rt2x00_dev *rt2x00dev = hw->priv;
|
|
u64 tsf;
|
|
u32 reg;
|
|
|
|
reg = rt2800_register_read(rt2x00dev, TSF_TIMER_DW1);
|
|
tsf = (u64) rt2x00_get_field32(reg, TSF_TIMER_DW1_HIGH_WORD) << 32;
|
|
reg = rt2800_register_read(rt2x00dev, TSF_TIMER_DW0);
|
|
tsf |= rt2x00_get_field32(reg, TSF_TIMER_DW0_LOW_WORD);
|
|
|
|
return tsf;
|
|
}
|
|
EXPORT_SYMBOL_GPL(rt2800_get_tsf);
|
|
|
|
int rt2800_ampdu_action(struct ieee80211_hw *hw, struct ieee80211_vif *vif,
|
|
struct ieee80211_ampdu_params *params)
|
|
{
|
|
struct ieee80211_sta *sta = params->sta;
|
|
enum ieee80211_ampdu_mlme_action action = params->action;
|
|
u16 tid = params->tid;
|
|
struct rt2x00_sta *sta_priv = (struct rt2x00_sta *)sta->drv_priv;
|
|
int ret = 0;
|
|
|
|
/*
|
|
* Don't allow aggregation for stations the hardware isn't aware
|
|
* of because tx status reports for frames to an unknown station
|
|
* always contain wcid=WCID_END+1 and thus we can't distinguish
|
|
* between multiple stations which leads to unwanted situations
|
|
* when the hw reorders frames due to aggregation.
|
|
*/
|
|
if (sta_priv->wcid > WCID_END)
|
|
return -ENOSPC;
|
|
|
|
switch (action) {
|
|
case IEEE80211_AMPDU_RX_START:
|
|
case IEEE80211_AMPDU_RX_STOP:
|
|
/*
|
|
* The hw itself takes care of setting up BlockAck mechanisms.
|
|
* So, we only have to allow mac80211 to nagotiate a BlockAck
|
|
* agreement. Once that is done, the hw will BlockAck incoming
|
|
* AMPDUs without further setup.
|
|
*/
|
|
break;
|
|
case IEEE80211_AMPDU_TX_START:
|
|
ret = IEEE80211_AMPDU_TX_START_IMMEDIATE;
|
|
break;
|
|
case IEEE80211_AMPDU_TX_STOP_CONT:
|
|
case IEEE80211_AMPDU_TX_STOP_FLUSH:
|
|
case IEEE80211_AMPDU_TX_STOP_FLUSH_CONT:
|
|
ieee80211_stop_tx_ba_cb_irqsafe(vif, sta->addr, tid);
|
|
break;
|
|
case IEEE80211_AMPDU_TX_OPERATIONAL:
|
|
break;
|
|
default:
|
|
rt2x00_warn((struct rt2x00_dev *)hw->priv,
|
|
"Unknown AMPDU action\n");
|
|
}
|
|
|
|
return ret;
|
|
}
|
|
EXPORT_SYMBOL_GPL(rt2800_ampdu_action);
|
|
|
|
int rt2800_get_survey(struct ieee80211_hw *hw, int idx,
|
|
struct survey_info *survey)
|
|
{
|
|
struct rt2x00_dev *rt2x00dev = hw->priv;
|
|
struct rt2x00_chan_survey *chan_survey =
|
|
&rt2x00dev->chan_survey[idx];
|
|
enum nl80211_band band = NL80211_BAND_2GHZ;
|
|
|
|
if (idx >= rt2x00dev->bands[band].n_channels) {
|
|
idx -= rt2x00dev->bands[band].n_channels;
|
|
band = NL80211_BAND_5GHZ;
|
|
}
|
|
|
|
if (idx >= rt2x00dev->bands[band].n_channels)
|
|
return -ENOENT;
|
|
|
|
if (idx == 0)
|
|
rt2800_update_survey(rt2x00dev);
|
|
|
|
survey->channel = &rt2x00dev->bands[band].channels[idx];
|
|
|
|
survey->filled = SURVEY_INFO_TIME |
|
|
SURVEY_INFO_TIME_BUSY |
|
|
SURVEY_INFO_TIME_EXT_BUSY;
|
|
|
|
survey->time = div_u64(chan_survey->time_idle + chan_survey->time_busy, 1000);
|
|
survey->time_busy = div_u64(chan_survey->time_busy, 1000);
|
|
survey->time_ext_busy = div_u64(chan_survey->time_ext_busy, 1000);
|
|
|
|
if (!(hw->conf.flags & IEEE80211_CONF_OFFCHANNEL))
|
|
survey->filled |= SURVEY_INFO_IN_USE;
|
|
|
|
return 0;
|
|
|
|
}
|
|
EXPORT_SYMBOL_GPL(rt2800_get_survey);
|
|
|
|
MODULE_AUTHOR(DRV_PROJECT ", Bartlomiej Zolnierkiewicz");
|
|
MODULE_VERSION(DRV_VERSION);
|
|
MODULE_DESCRIPTION("Ralink RT2800 library");
|
|
MODULE_LICENSE("GPL");
|