1259 lines
30 KiB
C
1259 lines
30 KiB
C
// SPDX-License-Identifier: GPL-2.0-only
|
|
/*
|
|
* (c) Copyright 2002-2010, Ralink Technology, Inc.
|
|
* Copyright (C) 2014 Felix Fietkau <nbd@openwrt.org>
|
|
* Copyright (C) 2015 Jakub Kicinski <kubakici@wp.pl>
|
|
*/
|
|
|
|
#include "mt7601u.h"
|
|
#include "mcu.h"
|
|
#include "eeprom.h"
|
|
#include "trace.h"
|
|
#include "initvals_phy.h"
|
|
|
|
#include <linux/etherdevice.h>
|
|
|
|
static void mt7601u_agc_reset(struct mt7601u_dev *dev);
|
|
|
|
static int
|
|
mt7601u_rf_wr(struct mt7601u_dev *dev, u8 bank, u8 offset, u8 value)
|
|
{
|
|
int ret = 0;
|
|
|
|
if (WARN_ON(!test_bit(MT7601U_STATE_WLAN_RUNNING, &dev->state)) ||
|
|
WARN_ON(offset > 63))
|
|
return -EINVAL;
|
|
if (test_bit(MT7601U_STATE_REMOVED, &dev->state))
|
|
return 0;
|
|
|
|
mutex_lock(&dev->reg_atomic_mutex);
|
|
|
|
if (!mt76_poll(dev, MT_RF_CSR_CFG, MT_RF_CSR_CFG_KICK, 0, 100)) {
|
|
ret = -ETIMEDOUT;
|
|
goto out;
|
|
}
|
|
|
|
mt7601u_wr(dev, MT_RF_CSR_CFG,
|
|
FIELD_PREP(MT_RF_CSR_CFG_DATA, value) |
|
|
FIELD_PREP(MT_RF_CSR_CFG_REG_BANK, bank) |
|
|
FIELD_PREP(MT_RF_CSR_CFG_REG_ID, offset) |
|
|
MT_RF_CSR_CFG_WR |
|
|
MT_RF_CSR_CFG_KICK);
|
|
trace_rf_write(dev, bank, offset, value);
|
|
out:
|
|
mutex_unlock(&dev->reg_atomic_mutex);
|
|
|
|
if (ret < 0)
|
|
dev_err(dev->dev, "Error: RF write %02hhx:%02hhx failed:%d!!\n",
|
|
bank, offset, ret);
|
|
|
|
return ret;
|
|
}
|
|
|
|
static int
|
|
mt7601u_rf_rr(struct mt7601u_dev *dev, u8 bank, u8 offset)
|
|
{
|
|
int ret = -ETIMEDOUT;
|
|
u32 val;
|
|
|
|
if (WARN_ON(!test_bit(MT7601U_STATE_WLAN_RUNNING, &dev->state)) ||
|
|
WARN_ON(offset > 63))
|
|
return -EINVAL;
|
|
if (test_bit(MT7601U_STATE_REMOVED, &dev->state))
|
|
return 0xff;
|
|
|
|
mutex_lock(&dev->reg_atomic_mutex);
|
|
|
|
if (!mt76_poll(dev, MT_RF_CSR_CFG, MT_RF_CSR_CFG_KICK, 0, 100))
|
|
goto out;
|
|
|
|
mt7601u_wr(dev, MT_RF_CSR_CFG,
|
|
FIELD_PREP(MT_RF_CSR_CFG_REG_BANK, bank) |
|
|
FIELD_PREP(MT_RF_CSR_CFG_REG_ID, offset) |
|
|
MT_RF_CSR_CFG_KICK);
|
|
|
|
if (!mt76_poll(dev, MT_RF_CSR_CFG, MT_RF_CSR_CFG_KICK, 0, 100))
|
|
goto out;
|
|
|
|
val = mt7601u_rr(dev, MT_RF_CSR_CFG);
|
|
if (FIELD_GET(MT_RF_CSR_CFG_REG_ID, val) == offset &&
|
|
FIELD_GET(MT_RF_CSR_CFG_REG_BANK, val) == bank) {
|
|
ret = FIELD_GET(MT_RF_CSR_CFG_DATA, val);
|
|
trace_rf_read(dev, bank, offset, ret);
|
|
}
|
|
out:
|
|
mutex_unlock(&dev->reg_atomic_mutex);
|
|
|
|
if (ret < 0)
|
|
dev_err(dev->dev, "Error: RF read %02hhx:%02hhx failed:%d!!\n",
|
|
bank, offset, ret);
|
|
|
|
return ret;
|
|
}
|
|
|
|
static int
|
|
mt7601u_rf_rmw(struct mt7601u_dev *dev, u8 bank, u8 offset, u8 mask, u8 val)
|
|
{
|
|
int ret;
|
|
|
|
ret = mt7601u_rf_rr(dev, bank, offset);
|
|
if (ret < 0)
|
|
return ret;
|
|
val |= ret & ~mask;
|
|
ret = mt7601u_rf_wr(dev, bank, offset, val);
|
|
if (ret)
|
|
return ret;
|
|
|
|
return val;
|
|
}
|
|
|
|
static int
|
|
mt7601u_rf_set(struct mt7601u_dev *dev, u8 bank, u8 offset, u8 val)
|
|
{
|
|
return mt7601u_rf_rmw(dev, bank, offset, 0, val);
|
|
}
|
|
|
|
static int
|
|
mt7601u_rf_clear(struct mt7601u_dev *dev, u8 bank, u8 offset, u8 mask)
|
|
{
|
|
return mt7601u_rf_rmw(dev, bank, offset, mask, 0);
|
|
}
|
|
|
|
static void mt7601u_bbp_wr(struct mt7601u_dev *dev, u8 offset, u8 val)
|
|
{
|
|
if (WARN_ON(!test_bit(MT7601U_STATE_WLAN_RUNNING, &dev->state)) ||
|
|
test_bit(MT7601U_STATE_REMOVED, &dev->state))
|
|
return;
|
|
|
|
mutex_lock(&dev->reg_atomic_mutex);
|
|
|
|
if (!mt76_poll(dev, MT_BBP_CSR_CFG, MT_BBP_CSR_CFG_BUSY, 0, 1000)) {
|
|
dev_err(dev->dev, "Error: BBP write %02hhx failed!!\n", offset);
|
|
goto out;
|
|
}
|
|
|
|
mt7601u_wr(dev, MT_BBP_CSR_CFG,
|
|
FIELD_PREP(MT_BBP_CSR_CFG_VAL, val) |
|
|
FIELD_PREP(MT_BBP_CSR_CFG_REG_NUM, offset) |
|
|
MT_BBP_CSR_CFG_RW_MODE | MT_BBP_CSR_CFG_BUSY);
|
|
trace_bbp_write(dev, offset, val);
|
|
out:
|
|
mutex_unlock(&dev->reg_atomic_mutex);
|
|
}
|
|
|
|
static int mt7601u_bbp_rr(struct mt7601u_dev *dev, u8 offset)
|
|
{
|
|
u32 val;
|
|
int ret = -ETIMEDOUT;
|
|
|
|
if (WARN_ON(!test_bit(MT7601U_STATE_WLAN_RUNNING, &dev->state)))
|
|
return -EINVAL;
|
|
if (test_bit(MT7601U_STATE_REMOVED, &dev->state))
|
|
return 0xff;
|
|
|
|
mutex_lock(&dev->reg_atomic_mutex);
|
|
|
|
if (!mt76_poll(dev, MT_BBP_CSR_CFG, MT_BBP_CSR_CFG_BUSY, 0, 1000))
|
|
goto out;
|
|
|
|
mt7601u_wr(dev, MT_BBP_CSR_CFG,
|
|
FIELD_PREP(MT_BBP_CSR_CFG_REG_NUM, offset) |
|
|
MT_BBP_CSR_CFG_RW_MODE | MT_BBP_CSR_CFG_BUSY |
|
|
MT_BBP_CSR_CFG_READ);
|
|
|
|
if (!mt76_poll(dev, MT_BBP_CSR_CFG, MT_BBP_CSR_CFG_BUSY, 0, 1000))
|
|
goto out;
|
|
|
|
val = mt7601u_rr(dev, MT_BBP_CSR_CFG);
|
|
if (FIELD_GET(MT_BBP_CSR_CFG_REG_NUM, val) == offset) {
|
|
ret = FIELD_GET(MT_BBP_CSR_CFG_VAL, val);
|
|
trace_bbp_read(dev, offset, ret);
|
|
}
|
|
out:
|
|
mutex_unlock(&dev->reg_atomic_mutex);
|
|
|
|
if (ret < 0)
|
|
dev_err(dev->dev, "Error: BBP read %02hhx failed:%d!!\n",
|
|
offset, ret);
|
|
|
|
return ret;
|
|
}
|
|
|
|
static int mt7601u_bbp_rmw(struct mt7601u_dev *dev, u8 offset, u8 mask, u8 val)
|
|
{
|
|
int ret;
|
|
|
|
ret = mt7601u_bbp_rr(dev, offset);
|
|
if (ret < 0)
|
|
return ret;
|
|
val |= ret & ~mask;
|
|
mt7601u_bbp_wr(dev, offset, val);
|
|
|
|
return val;
|
|
}
|
|
|
|
static u8 mt7601u_bbp_rmc(struct mt7601u_dev *dev, u8 offset, u8 mask, u8 val)
|
|
{
|
|
int ret;
|
|
|
|
ret = mt7601u_bbp_rr(dev, offset);
|
|
if (ret < 0)
|
|
return ret;
|
|
val |= ret & ~mask;
|
|
if (ret != val)
|
|
mt7601u_bbp_wr(dev, offset, val);
|
|
|
|
return val;
|
|
}
|
|
|
|
int mt7601u_wait_bbp_ready(struct mt7601u_dev *dev)
|
|
{
|
|
int i = 20;
|
|
u8 val;
|
|
|
|
do {
|
|
val = mt7601u_bbp_rr(dev, MT_BBP_REG_VERSION);
|
|
if (val && val != 0xff)
|
|
break;
|
|
} while (--i);
|
|
|
|
if (!i) {
|
|
dev_err(dev->dev, "Error: BBP is not ready\n");
|
|
return -EIO;
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
u32 mt7601u_bbp_set_ctrlch(struct mt7601u_dev *dev, bool below)
|
|
{
|
|
return mt7601u_bbp_rmc(dev, 3, 0x20, below ? 0x20 : 0);
|
|
}
|
|
|
|
int mt7601u_phy_get_rssi(struct mt7601u_dev *dev,
|
|
struct mt7601u_rxwi *rxwi, u16 rate)
|
|
{
|
|
static const s8 lna[2][2][3] = {
|
|
/* main LNA */ {
|
|
/* bw20 */ { -2, 15, 33 },
|
|
/* bw40 */ { 0, 16, 34 }
|
|
},
|
|
/* aux LNA */ {
|
|
/* bw20 */ { -2, 15, 33 },
|
|
/* bw40 */ { -2, 16, 34 }
|
|
}
|
|
};
|
|
int bw = FIELD_GET(MT_RXWI_RATE_BW, rate);
|
|
int aux_lna = FIELD_GET(MT_RXWI_ANT_AUX_LNA, rxwi->ant);
|
|
int lna_id = FIELD_GET(MT_RXWI_GAIN_RSSI_LNA_ID, rxwi->gain);
|
|
int val;
|
|
|
|
if (lna_id) /* LNA id can be 0, 2, 3. */
|
|
lna_id--;
|
|
|
|
val = 8;
|
|
val -= lna[aux_lna][bw][lna_id];
|
|
val -= FIELD_GET(MT_RXWI_GAIN_RSSI_VAL, rxwi->gain);
|
|
val -= dev->ee->lna_gain;
|
|
val -= dev->ee->rssi_offset[0];
|
|
|
|
return val;
|
|
}
|
|
|
|
static void mt7601u_vco_cal(struct mt7601u_dev *dev)
|
|
{
|
|
mt7601u_rf_wr(dev, 0, 4, 0x0a);
|
|
mt7601u_rf_wr(dev, 0, 5, 0x20);
|
|
mt7601u_rf_set(dev, 0, 4, BIT(7));
|
|
msleep(2);
|
|
}
|
|
|
|
static int mt7601u_set_bw_filter(struct mt7601u_dev *dev, bool cal)
|
|
{
|
|
u32 filter = 0;
|
|
int ret;
|
|
|
|
if (!cal)
|
|
filter |= 0x10000;
|
|
if (dev->bw != MT_BW_20)
|
|
filter |= 0x00100;
|
|
|
|
/* TX */
|
|
ret = mt7601u_mcu_calibrate(dev, MCU_CAL_BW, filter | 1);
|
|
if (ret)
|
|
return ret;
|
|
/* RX */
|
|
return mt7601u_mcu_calibrate(dev, MCU_CAL_BW, filter);
|
|
}
|
|
|
|
static int mt7601u_load_bbp_temp_table_bw(struct mt7601u_dev *dev)
|
|
{
|
|
const struct reg_table *t;
|
|
|
|
if (WARN_ON(dev->temp_mode > MT_TEMP_MODE_LOW))
|
|
return -EINVAL;
|
|
|
|
t = &bbp_mode_table[dev->temp_mode][dev->bw];
|
|
|
|
return mt7601u_write_reg_pairs(dev, MT_MCU_MEMMAP_BBP, t->regs, t->n);
|
|
}
|
|
|
|
static int mt7601u_bbp_temp(struct mt7601u_dev *dev, int mode, const char *name)
|
|
{
|
|
const struct reg_table *t;
|
|
int ret;
|
|
|
|
if (dev->temp_mode == mode)
|
|
return 0;
|
|
|
|
dev->temp_mode = mode;
|
|
trace_temp_mode(dev, mode);
|
|
|
|
t = bbp_mode_table[dev->temp_mode];
|
|
ret = mt7601u_write_reg_pairs(dev, MT_MCU_MEMMAP_BBP,
|
|
t[2].regs, t[2].n);
|
|
if (ret)
|
|
return ret;
|
|
|
|
return mt7601u_write_reg_pairs(dev, MT_MCU_MEMMAP_BBP,
|
|
t[dev->bw].regs, t[dev->bw].n);
|
|
}
|
|
|
|
static void mt7601u_apply_ch14_fixup(struct mt7601u_dev *dev, int hw_chan)
|
|
{
|
|
struct mt7601u_rate_power *t = &dev->ee->power_rate_table;
|
|
|
|
if (hw_chan != 14 || dev->bw != MT_BW_20) {
|
|
mt7601u_bbp_rmw(dev, 4, 0x20, 0);
|
|
mt7601u_bbp_wr(dev, 178, 0xff);
|
|
|
|
t->cck[0].bw20 = dev->ee->real_cck_bw20[0];
|
|
t->cck[1].bw20 = dev->ee->real_cck_bw20[1];
|
|
} else { /* Apply CH14 OBW fixup */
|
|
mt7601u_bbp_wr(dev, 4, 0x60);
|
|
mt7601u_bbp_wr(dev, 178, 0);
|
|
|
|
/* Note: vendor code is buggy here for negative values */
|
|
t->cck[0].bw20 = dev->ee->real_cck_bw20[0] - 2;
|
|
t->cck[1].bw20 = dev->ee->real_cck_bw20[1] - 2;
|
|
}
|
|
}
|
|
|
|
static int __mt7601u_phy_set_channel(struct mt7601u_dev *dev,
|
|
struct cfg80211_chan_def *chandef)
|
|
{
|
|
#define FREQ_PLAN_REGS 4
|
|
static const u8 freq_plan[14][FREQ_PLAN_REGS] = {
|
|
{ 0x99, 0x99, 0x09, 0x50 },
|
|
{ 0x46, 0x44, 0x0a, 0x50 },
|
|
{ 0xec, 0xee, 0x0a, 0x50 },
|
|
{ 0x99, 0x99, 0x0b, 0x50 },
|
|
{ 0x46, 0x44, 0x08, 0x51 },
|
|
{ 0xec, 0xee, 0x08, 0x51 },
|
|
{ 0x99, 0x99, 0x09, 0x51 },
|
|
{ 0x46, 0x44, 0x0a, 0x51 },
|
|
{ 0xec, 0xee, 0x0a, 0x51 },
|
|
{ 0x99, 0x99, 0x0b, 0x51 },
|
|
{ 0x46, 0x44, 0x08, 0x52 },
|
|
{ 0xec, 0xee, 0x08, 0x52 },
|
|
{ 0x99, 0x99, 0x09, 0x52 },
|
|
{ 0x33, 0x33, 0x0b, 0x52 },
|
|
};
|
|
struct mt76_reg_pair channel_freq_plan[FREQ_PLAN_REGS] = {
|
|
{ 17, 0 }, { 18, 0 }, { 19, 0 }, { 20, 0 },
|
|
};
|
|
struct mt76_reg_pair bbp_settings[3] = {
|
|
{ 62, 0x37 - dev->ee->lna_gain },
|
|
{ 63, 0x37 - dev->ee->lna_gain },
|
|
{ 64, 0x37 - dev->ee->lna_gain },
|
|
};
|
|
|
|
struct ieee80211_channel *chan = chandef->chan;
|
|
enum nl80211_channel_type chan_type =
|
|
cfg80211_get_chandef_type(chandef);
|
|
struct mt7601u_rate_power *t = &dev->ee->power_rate_table;
|
|
int chan_idx;
|
|
bool chan_ext_below;
|
|
u8 bw;
|
|
int i, ret;
|
|
|
|
bw = MT_BW_20;
|
|
chan_ext_below = (chan_type == NL80211_CHAN_HT40MINUS);
|
|
chan_idx = chan->hw_value - 1;
|
|
|
|
if (chandef->width == NL80211_CHAN_WIDTH_40) {
|
|
bw = MT_BW_40;
|
|
|
|
if (chan_idx > 1 && chan_type == NL80211_CHAN_HT40MINUS)
|
|
chan_idx -= 2;
|
|
else if (chan_idx < 12 && chan_type == NL80211_CHAN_HT40PLUS)
|
|
chan_idx += 2;
|
|
else
|
|
dev_err(dev->dev, "Error: invalid 40MHz channel!!\n");
|
|
}
|
|
|
|
if (bw != dev->bw || chan_ext_below != dev->chan_ext_below) {
|
|
dev_dbg(dev->dev, "Info: switching HT mode bw:%d below:%d\n",
|
|
bw, chan_ext_below);
|
|
|
|
mt7601u_bbp_set_bw(dev, bw);
|
|
|
|
mt7601u_bbp_set_ctrlch(dev, chan_ext_below);
|
|
mt7601u_mac_set_ctrlch(dev, chan_ext_below);
|
|
dev->chan_ext_below = chan_ext_below;
|
|
}
|
|
|
|
for (i = 0; i < FREQ_PLAN_REGS; i++)
|
|
channel_freq_plan[i].value = freq_plan[chan_idx][i];
|
|
|
|
ret = mt7601u_write_reg_pairs(dev, MT_MCU_MEMMAP_RF,
|
|
channel_freq_plan, FREQ_PLAN_REGS);
|
|
if (ret)
|
|
return ret;
|
|
|
|
mt7601u_rmw(dev, MT_TX_ALC_CFG_0, 0x3f3f,
|
|
dev->ee->chan_pwr[chan_idx] & 0x3f);
|
|
|
|
ret = mt7601u_write_reg_pairs(dev, MT_MCU_MEMMAP_BBP,
|
|
bbp_settings, ARRAY_SIZE(bbp_settings));
|
|
if (ret)
|
|
return ret;
|
|
|
|
mt7601u_vco_cal(dev);
|
|
mt7601u_bbp_set_bw(dev, bw);
|
|
ret = mt7601u_set_bw_filter(dev, false);
|
|
if (ret)
|
|
return ret;
|
|
|
|
mt7601u_apply_ch14_fixup(dev, chan->hw_value);
|
|
mt7601u_wr(dev, MT_TX_PWR_CFG_0, int_to_s6(t->ofdm[1].bw20) << 24 |
|
|
int_to_s6(t->ofdm[0].bw20) << 16 |
|
|
int_to_s6(t->cck[1].bw20) << 8 |
|
|
int_to_s6(t->cck[0].bw20));
|
|
|
|
if (test_bit(MT7601U_STATE_SCANNING, &dev->state))
|
|
mt7601u_agc_reset(dev);
|
|
|
|
dev->chandef = *chandef;
|
|
|
|
return 0;
|
|
}
|
|
|
|
int mt7601u_phy_set_channel(struct mt7601u_dev *dev,
|
|
struct cfg80211_chan_def *chandef)
|
|
{
|
|
int ret;
|
|
|
|
cancel_delayed_work_sync(&dev->cal_work);
|
|
cancel_delayed_work_sync(&dev->freq_cal.work);
|
|
|
|
mutex_lock(&dev->hw_atomic_mutex);
|
|
ret = __mt7601u_phy_set_channel(dev, chandef);
|
|
mutex_unlock(&dev->hw_atomic_mutex);
|
|
if (ret)
|
|
return ret;
|
|
|
|
if (test_bit(MT7601U_STATE_SCANNING, &dev->state))
|
|
return 0;
|
|
|
|
ieee80211_queue_delayed_work(dev->hw, &dev->cal_work,
|
|
MT_CALIBRATE_INTERVAL);
|
|
if (dev->freq_cal.enabled)
|
|
ieee80211_queue_delayed_work(dev->hw, &dev->freq_cal.work,
|
|
MT_FREQ_CAL_INIT_DELAY);
|
|
return 0;
|
|
}
|
|
|
|
#define BBP_R47_FLAG GENMASK(2, 0)
|
|
#define BBP_R47_F_TSSI 0
|
|
#define BBP_R47_F_PKT_T 1
|
|
#define BBP_R47_F_TX_RATE 2
|
|
#define BBP_R47_F_TEMP 4
|
|
/**
|
|
* mt7601u_bbp_r47_get - read value through BBP R47/R49 pair
|
|
* @dev: pointer to adapter structure
|
|
* @reg: value of BBP R47 before the operation
|
|
* @flag: one of the BBP_R47_F_* flags
|
|
*
|
|
* Convenience helper for reading values through BBP R47/R49 pair.
|
|
* Takes old value of BBP R47 as @reg, because callers usually have it
|
|
* cached already.
|
|
*
|
|
* Return: value of BBP R49.
|
|
*/
|
|
static u8 mt7601u_bbp_r47_get(struct mt7601u_dev *dev, u8 reg, u8 flag)
|
|
{
|
|
flag |= reg & ~BBP_R47_FLAG;
|
|
mt7601u_bbp_wr(dev, 47, flag);
|
|
usleep_range(500, 700);
|
|
return mt7601u_bbp_rr(dev, 49);
|
|
}
|
|
|
|
static s8 mt7601u_read_bootup_temp(struct mt7601u_dev *dev)
|
|
{
|
|
u8 bbp_val, temp;
|
|
u32 rf_bp, rf_set;
|
|
int i;
|
|
|
|
rf_set = mt7601u_rr(dev, MT_RF_SETTING_0);
|
|
rf_bp = mt7601u_rr(dev, MT_RF_BYPASS_0);
|
|
|
|
mt7601u_wr(dev, MT_RF_BYPASS_0, 0);
|
|
mt7601u_wr(dev, MT_RF_SETTING_0, 0x00000010);
|
|
mt7601u_wr(dev, MT_RF_BYPASS_0, 0x00000010);
|
|
|
|
bbp_val = mt7601u_bbp_rmw(dev, 47, 0, 0x10);
|
|
|
|
mt7601u_bbp_wr(dev, 22, 0x40);
|
|
|
|
for (i = 100; i && (bbp_val & 0x10); i--)
|
|
bbp_val = mt7601u_bbp_rr(dev, 47);
|
|
|
|
temp = mt7601u_bbp_r47_get(dev, bbp_val, BBP_R47_F_TEMP);
|
|
|
|
mt7601u_bbp_wr(dev, 22, 0);
|
|
|
|
bbp_val = mt7601u_bbp_rr(dev, 21);
|
|
bbp_val |= 0x02;
|
|
mt7601u_bbp_wr(dev, 21, bbp_val);
|
|
bbp_val &= ~0x02;
|
|
mt7601u_bbp_wr(dev, 21, bbp_val);
|
|
|
|
mt7601u_wr(dev, MT_RF_BYPASS_0, 0);
|
|
mt7601u_wr(dev, MT_RF_SETTING_0, rf_set);
|
|
mt7601u_wr(dev, MT_RF_BYPASS_0, rf_bp);
|
|
|
|
trace_read_temp(dev, temp);
|
|
return temp;
|
|
}
|
|
|
|
static s8 mt7601u_read_temp(struct mt7601u_dev *dev)
|
|
{
|
|
int i;
|
|
u8 val;
|
|
s8 temp;
|
|
|
|
val = mt7601u_bbp_rmw(dev, 47, 0x7f, 0x10);
|
|
|
|
/* Note: this rarely succeeds, temp can change even if it fails. */
|
|
for (i = 100; i && (val & 0x10); i--)
|
|
val = mt7601u_bbp_rr(dev, 47);
|
|
|
|
temp = mt7601u_bbp_r47_get(dev, val, BBP_R47_F_TEMP);
|
|
|
|
trace_read_temp(dev, temp);
|
|
return temp;
|
|
}
|
|
|
|
static void mt7601u_rxdc_cal(struct mt7601u_dev *dev)
|
|
{
|
|
static const struct mt76_reg_pair intro[] = {
|
|
{ 158, 0x8d }, { 159, 0xfc },
|
|
{ 158, 0x8c }, { 159, 0x4c },
|
|
}, outro[] = {
|
|
{ 158, 0x8d }, { 159, 0xe0 },
|
|
};
|
|
u32 mac_ctrl;
|
|
int i, ret;
|
|
|
|
mac_ctrl = mt7601u_rr(dev, MT_MAC_SYS_CTRL);
|
|
mt7601u_wr(dev, MT_MAC_SYS_CTRL, MT_MAC_SYS_CTRL_ENABLE_RX);
|
|
|
|
ret = mt7601u_write_reg_pairs(dev, MT_MCU_MEMMAP_BBP,
|
|
intro, ARRAY_SIZE(intro));
|
|
if (ret)
|
|
dev_err(dev->dev, "%s intro failed:%d\n", __func__, ret);
|
|
|
|
for (i = 20; i; i--) {
|
|
usleep_range(300, 500);
|
|
|
|
mt7601u_bbp_wr(dev, 158, 0x8c);
|
|
if (mt7601u_bbp_rr(dev, 159) == 0x0c)
|
|
break;
|
|
}
|
|
if (!i)
|
|
dev_err(dev->dev, "%s timed out\n", __func__);
|
|
|
|
mt7601u_wr(dev, MT_MAC_SYS_CTRL, 0);
|
|
|
|
ret = mt7601u_write_reg_pairs(dev, MT_MCU_MEMMAP_BBP,
|
|
outro, ARRAY_SIZE(outro));
|
|
if (ret)
|
|
dev_err(dev->dev, "%s outro failed:%d\n", __func__, ret);
|
|
|
|
mt7601u_wr(dev, MT_MAC_SYS_CTRL, mac_ctrl);
|
|
}
|
|
|
|
void mt7601u_phy_recalibrate_after_assoc(struct mt7601u_dev *dev)
|
|
{
|
|
if (test_bit(MT7601U_STATE_REMOVED, &dev->state))
|
|
return;
|
|
|
|
mt7601u_mcu_calibrate(dev, MCU_CAL_DPD, dev->curr_temp);
|
|
|
|
mt7601u_rxdc_cal(dev);
|
|
}
|
|
|
|
/* Note: function copied from vendor driver */
|
|
static s16 lin2dBd(u16 linear)
|
|
{
|
|
short exp = 0;
|
|
unsigned int mantisa;
|
|
int app, dBd;
|
|
|
|
if (WARN_ON(!linear))
|
|
return -10000;
|
|
|
|
mantisa = linear;
|
|
|
|
exp = fls(mantisa) - 16;
|
|
if (exp > 0)
|
|
mantisa >>= exp;
|
|
else
|
|
mantisa <<= abs(exp);
|
|
|
|
if (mantisa <= 0xb800)
|
|
app = (mantisa + (mantisa >> 3) + (mantisa >> 4) - 0x9600);
|
|
else
|
|
app = (mantisa - (mantisa >> 3) - (mantisa >> 6) - 0x5a00);
|
|
if (app < 0)
|
|
app = 0;
|
|
|
|
dBd = ((15 + exp) << 15) + app;
|
|
dBd = (dBd << 2) + (dBd << 1) + (dBd >> 6) + (dBd >> 7);
|
|
dBd = (dBd >> 10);
|
|
|
|
return dBd;
|
|
}
|
|
|
|
static void
|
|
mt7601u_set_initial_tssi(struct mt7601u_dev *dev, s16 tssi_db, s16 tssi_hvga_db)
|
|
{
|
|
struct tssi_data *d = &dev->ee->tssi_data;
|
|
int init_offset;
|
|
|
|
init_offset = -((tssi_db * d->slope + d->offset[1]) / 4096) + 10;
|
|
|
|
mt76_rmw(dev, MT_TX_ALC_CFG_1, MT_TX_ALC_CFG_1_TEMP_COMP,
|
|
int_to_s6(init_offset) & MT_TX_ALC_CFG_1_TEMP_COMP);
|
|
}
|
|
|
|
static void mt7601u_tssi_dc_gain_cal(struct mt7601u_dev *dev)
|
|
{
|
|
u8 rf_vga, rf_mixer, bbp_r47;
|
|
int i, j;
|
|
s8 res[4];
|
|
s16 tssi_init_db, tssi_init_hvga_db;
|
|
|
|
mt7601u_wr(dev, MT_RF_SETTING_0, 0x00000030);
|
|
mt7601u_wr(dev, MT_RF_BYPASS_0, 0x000c0030);
|
|
mt7601u_wr(dev, MT_MAC_SYS_CTRL, 0);
|
|
|
|
mt7601u_bbp_wr(dev, 58, 0);
|
|
mt7601u_bbp_wr(dev, 241, 0x2);
|
|
mt7601u_bbp_wr(dev, 23, 0x8);
|
|
bbp_r47 = mt7601u_bbp_rr(dev, 47);
|
|
|
|
/* Set VGA gain */
|
|
rf_vga = mt7601u_rf_rr(dev, 5, 3);
|
|
mt7601u_rf_wr(dev, 5, 3, 8);
|
|
|
|
/* Mixer disable */
|
|
rf_mixer = mt7601u_rf_rr(dev, 4, 39);
|
|
mt7601u_rf_wr(dev, 4, 39, 0);
|
|
|
|
for (i = 0; i < 4; i++) {
|
|
mt7601u_rf_wr(dev, 4, 39, (i & 1) ? rf_mixer : 0);
|
|
|
|
mt7601u_bbp_wr(dev, 23, (i < 2) ? 0x08 : 0x02);
|
|
mt7601u_rf_wr(dev, 5, 3, (i < 2) ? 0x08 : 0x11);
|
|
|
|
/* BBP TSSI initial and soft reset */
|
|
mt7601u_bbp_wr(dev, 22, 0);
|
|
mt7601u_bbp_wr(dev, 244, 0);
|
|
|
|
mt7601u_bbp_wr(dev, 21, 1);
|
|
udelay(1);
|
|
mt7601u_bbp_wr(dev, 21, 0);
|
|
|
|
/* TSSI measurement */
|
|
mt7601u_bbp_wr(dev, 47, 0x50);
|
|
mt7601u_bbp_wr(dev, (i & 1) ? 244 : 22, (i & 1) ? 0x31 : 0x40);
|
|
|
|
for (j = 20; j; j--)
|
|
if (!(mt7601u_bbp_rr(dev, 47) & 0x10))
|
|
break;
|
|
if (!j)
|
|
dev_err(dev->dev, "%s timed out\n", __func__);
|
|
|
|
/* TSSI read */
|
|
mt7601u_bbp_wr(dev, 47, 0x40);
|
|
res[i] = mt7601u_bbp_rr(dev, 49);
|
|
}
|
|
|
|
tssi_init_db = lin2dBd((short)res[1] - res[0]);
|
|
tssi_init_hvga_db = lin2dBd(((short)res[3] - res[2]) * 4);
|
|
dev->tssi_init = res[0];
|
|
dev->tssi_init_hvga = res[2];
|
|
dev->tssi_init_hvga_offset_db = tssi_init_hvga_db - tssi_init_db;
|
|
|
|
dev_dbg(dev->dev,
|
|
"TSSI_init:%hhx db:%hx hvga:%hhx hvga_db:%hx off_db:%hx\n",
|
|
dev->tssi_init, tssi_init_db, dev->tssi_init_hvga,
|
|
tssi_init_hvga_db, dev->tssi_init_hvga_offset_db);
|
|
|
|
mt7601u_bbp_wr(dev, 22, 0);
|
|
mt7601u_bbp_wr(dev, 244, 0);
|
|
|
|
mt7601u_bbp_wr(dev, 21, 1);
|
|
udelay(1);
|
|
mt7601u_bbp_wr(dev, 21, 0);
|
|
|
|
mt7601u_wr(dev, MT_RF_BYPASS_0, 0);
|
|
mt7601u_wr(dev, MT_RF_SETTING_0, 0);
|
|
|
|
mt7601u_rf_wr(dev, 5, 3, rf_vga);
|
|
mt7601u_rf_wr(dev, 4, 39, rf_mixer);
|
|
mt7601u_bbp_wr(dev, 47, bbp_r47);
|
|
|
|
mt7601u_set_initial_tssi(dev, tssi_init_db, tssi_init_hvga_db);
|
|
}
|
|
|
|
static int mt7601u_temp_comp(struct mt7601u_dev *dev, bool on)
|
|
{
|
|
int ret, temp, hi_temp = 400, lo_temp = -200;
|
|
|
|
temp = (dev->raw_temp - dev->ee->ref_temp) * MT_EE_TEMPERATURE_SLOPE;
|
|
dev->curr_temp = temp;
|
|
|
|
/* DPD Calibration */
|
|
if (temp - dev->dpd_temp > 450 || temp - dev->dpd_temp < -450) {
|
|
dev->dpd_temp = temp;
|
|
|
|
ret = mt7601u_mcu_calibrate(dev, MCU_CAL_DPD, dev->dpd_temp);
|
|
if (ret)
|
|
return ret;
|
|
|
|
mt7601u_vco_cal(dev);
|
|
|
|
dev_dbg(dev->dev, "Recalibrate DPD\n");
|
|
}
|
|
|
|
/* PLL Lock Protect */
|
|
if (temp < -50 && !dev->pll_lock_protect) { /* < 20C */
|
|
dev->pll_lock_protect = true;
|
|
|
|
mt7601u_rf_wr(dev, 4, 4, 6);
|
|
mt7601u_rf_clear(dev, 4, 10, 0x30);
|
|
|
|
dev_dbg(dev->dev, "PLL lock protect on - too cold\n");
|
|
} else if (temp > 50 && dev->pll_lock_protect) { /* > 30C */
|
|
dev->pll_lock_protect = false;
|
|
|
|
mt7601u_rf_wr(dev, 4, 4, 0);
|
|
mt7601u_rf_rmw(dev, 4, 10, 0x30, 0x10);
|
|
|
|
dev_dbg(dev->dev, "PLL lock protect off\n");
|
|
}
|
|
|
|
if (on) {
|
|
hi_temp -= 50;
|
|
lo_temp -= 50;
|
|
}
|
|
|
|
/* BBP CR for H, L, N temperature */
|
|
if (temp > hi_temp)
|
|
return mt7601u_bbp_temp(dev, MT_TEMP_MODE_HIGH, "high");
|
|
else if (temp > lo_temp)
|
|
return mt7601u_bbp_temp(dev, MT_TEMP_MODE_NORMAL, "normal");
|
|
else
|
|
return mt7601u_bbp_temp(dev, MT_TEMP_MODE_LOW, "low");
|
|
}
|
|
|
|
/* Note: this is used only with TSSI, we can just use trgt_pwr from eeprom. */
|
|
static int mt7601u_current_tx_power(struct mt7601u_dev *dev)
|
|
{
|
|
return dev->ee->chan_pwr[dev->chandef.chan->hw_value - 1];
|
|
}
|
|
|
|
static bool mt7601u_use_hvga(struct mt7601u_dev *dev)
|
|
{
|
|
return !(mt7601u_current_tx_power(dev) > 20);
|
|
}
|
|
|
|
static s16
|
|
mt7601u_phy_rf_pa_mode_val(struct mt7601u_dev *dev, int phy_mode, int tx_rate)
|
|
{
|
|
static const s16 decode_tb[] = { 0, 8847, -5734, -5734 };
|
|
u32 reg;
|
|
|
|
switch (phy_mode) {
|
|
case MT_PHY_TYPE_OFDM:
|
|
tx_rate += 4;
|
|
fallthrough;
|
|
case MT_PHY_TYPE_CCK:
|
|
reg = dev->rf_pa_mode[0];
|
|
break;
|
|
default:
|
|
reg = dev->rf_pa_mode[1];
|
|
break;
|
|
}
|
|
|
|
return decode_tb[(reg >> (tx_rate * 2)) & 0x3];
|
|
}
|
|
|
|
static struct mt7601u_tssi_params
|
|
mt7601u_tssi_params_get(struct mt7601u_dev *dev)
|
|
{
|
|
static const u8 ofdm_pkt2rate[8] = { 6, 4, 2, 0, 7, 5, 3, 1 };
|
|
static const int static_power[4] = { 0, -49152, -98304, 49152 };
|
|
struct mt7601u_tssi_params p;
|
|
u8 bbp_r47, pkt_type, tx_rate;
|
|
struct power_per_rate *rate_table;
|
|
|
|
bbp_r47 = mt7601u_bbp_rr(dev, 47);
|
|
|
|
p.tssi0 = mt7601u_bbp_r47_get(dev, bbp_r47, BBP_R47_F_TSSI);
|
|
dev->raw_temp = mt7601u_bbp_r47_get(dev, bbp_r47, BBP_R47_F_TEMP);
|
|
pkt_type = mt7601u_bbp_r47_get(dev, bbp_r47, BBP_R47_F_PKT_T);
|
|
|
|
p.trgt_power = mt7601u_current_tx_power(dev);
|
|
|
|
switch (pkt_type & 0x03) {
|
|
case MT_PHY_TYPE_CCK:
|
|
tx_rate = (pkt_type >> 4) & 0x03;
|
|
rate_table = dev->ee->power_rate_table.cck;
|
|
break;
|
|
|
|
case MT_PHY_TYPE_OFDM:
|
|
tx_rate = ofdm_pkt2rate[(pkt_type >> 4) & 0x07];
|
|
rate_table = dev->ee->power_rate_table.ofdm;
|
|
break;
|
|
|
|
default:
|
|
tx_rate = mt7601u_bbp_r47_get(dev, bbp_r47, BBP_R47_F_TX_RATE);
|
|
tx_rate &= 0x7f;
|
|
rate_table = dev->ee->power_rate_table.ht;
|
|
break;
|
|
}
|
|
|
|
if (dev->bw == MT_BW_20)
|
|
p.trgt_power += rate_table[tx_rate / 2].bw20;
|
|
else
|
|
p.trgt_power += rate_table[tx_rate / 2].bw40;
|
|
|
|
p.trgt_power <<= 12;
|
|
|
|
dev_dbg(dev->dev, "tx_rate:%02hhx pwr:%08x\n", tx_rate, p.trgt_power);
|
|
|
|
p.trgt_power += mt7601u_phy_rf_pa_mode_val(dev, pkt_type & 0x03,
|
|
tx_rate);
|
|
|
|
/* Channel 14, cck, bw20 */
|
|
if ((pkt_type & 0x03) == MT_PHY_TYPE_CCK) {
|
|
if (mt7601u_bbp_rr(dev, 4) & 0x20)
|
|
p.trgt_power += mt7601u_bbp_rr(dev, 178) ? 18022 : 9830;
|
|
else
|
|
p.trgt_power += mt7601u_bbp_rr(dev, 178) ? 819 : 24576;
|
|
}
|
|
|
|
p.trgt_power += static_power[mt7601u_bbp_rr(dev, 1) & 0x03];
|
|
|
|
p.trgt_power += dev->ee->tssi_data.tx0_delta_offset;
|
|
|
|
dev_dbg(dev->dev,
|
|
"tssi:%02hhx t_power:%08x temp:%02hhx pkt_type:%02hhx\n",
|
|
p.tssi0, p.trgt_power, dev->raw_temp, pkt_type);
|
|
|
|
return p;
|
|
}
|
|
|
|
static bool mt7601u_tssi_read_ready(struct mt7601u_dev *dev)
|
|
{
|
|
return !(mt7601u_bbp_rr(dev, 47) & 0x10);
|
|
}
|
|
|
|
static int mt7601u_tssi_cal(struct mt7601u_dev *dev)
|
|
{
|
|
struct mt7601u_tssi_params params;
|
|
int curr_pwr, diff_pwr;
|
|
char tssi_offset;
|
|
s8 tssi_init;
|
|
s16 tssi_m_dc, tssi_db;
|
|
bool hvga;
|
|
u32 val;
|
|
|
|
if (!dev->ee->tssi_enabled)
|
|
return 0;
|
|
|
|
hvga = mt7601u_use_hvga(dev);
|
|
if (!dev->tssi_read_trig)
|
|
return mt7601u_mcu_tssi_read_kick(dev, hvga);
|
|
|
|
if (!mt7601u_tssi_read_ready(dev))
|
|
return 0;
|
|
|
|
params = mt7601u_tssi_params_get(dev);
|
|
|
|
tssi_init = (hvga ? dev->tssi_init_hvga : dev->tssi_init);
|
|
tssi_m_dc = params.tssi0 - tssi_init;
|
|
tssi_db = lin2dBd(tssi_m_dc);
|
|
dev_dbg(dev->dev, "tssi dc:%04hx db:%04hx hvga:%d\n",
|
|
tssi_m_dc, tssi_db, hvga);
|
|
|
|
if (dev->chandef.chan->hw_value < 5)
|
|
tssi_offset = dev->ee->tssi_data.offset[0];
|
|
else if (dev->chandef.chan->hw_value < 9)
|
|
tssi_offset = dev->ee->tssi_data.offset[1];
|
|
else
|
|
tssi_offset = dev->ee->tssi_data.offset[2];
|
|
|
|
if (hvga)
|
|
tssi_db -= dev->tssi_init_hvga_offset_db;
|
|
|
|
curr_pwr = tssi_db * dev->ee->tssi_data.slope + (tssi_offset << 9);
|
|
diff_pwr = params.trgt_power - curr_pwr;
|
|
dev_dbg(dev->dev, "Power curr:%08x diff:%08x\n", curr_pwr, diff_pwr);
|
|
|
|
if (params.tssi0 > 126 && diff_pwr > 0) {
|
|
dev_err(dev->dev, "Error: TSSI upper saturation\n");
|
|
diff_pwr = 0;
|
|
}
|
|
if (params.tssi0 - tssi_init < 1 && diff_pwr < 0) {
|
|
dev_err(dev->dev, "Error: TSSI lower saturation\n");
|
|
diff_pwr = 0;
|
|
}
|
|
|
|
if ((dev->prev_pwr_diff ^ diff_pwr) < 0 && abs(diff_pwr) < 4096 &&
|
|
(abs(diff_pwr) > abs(dev->prev_pwr_diff) ||
|
|
(diff_pwr > 0 && diff_pwr == -dev->prev_pwr_diff)))
|
|
diff_pwr = 0;
|
|
else
|
|
dev->prev_pwr_diff = diff_pwr;
|
|
|
|
diff_pwr += (diff_pwr > 0) ? 2048 : -2048;
|
|
diff_pwr /= 4096;
|
|
|
|
dev_dbg(dev->dev, "final diff: %08x\n", diff_pwr);
|
|
|
|
val = mt7601u_rr(dev, MT_TX_ALC_CFG_1);
|
|
curr_pwr = s6_to_int(FIELD_GET(MT_TX_ALC_CFG_1_TEMP_COMP, val));
|
|
diff_pwr += curr_pwr;
|
|
val = (val & ~MT_TX_ALC_CFG_1_TEMP_COMP) | int_to_s6(diff_pwr);
|
|
mt7601u_wr(dev, MT_TX_ALC_CFG_1, val);
|
|
|
|
return mt7601u_mcu_tssi_read_kick(dev, hvga);
|
|
}
|
|
|
|
static u8 mt7601u_agc_default(struct mt7601u_dev *dev)
|
|
{
|
|
return (dev->ee->lna_gain - 8) * 2 + 0x34;
|
|
}
|
|
|
|
static void mt7601u_agc_reset(struct mt7601u_dev *dev)
|
|
{
|
|
u8 agc = mt7601u_agc_default(dev);
|
|
|
|
mt7601u_bbp_wr(dev, 66, agc);
|
|
}
|
|
|
|
void mt7601u_agc_save(struct mt7601u_dev *dev)
|
|
{
|
|
dev->agc_save = mt7601u_bbp_rr(dev, 66);
|
|
}
|
|
|
|
void mt7601u_agc_restore(struct mt7601u_dev *dev)
|
|
{
|
|
mt7601u_bbp_wr(dev, 66, dev->agc_save);
|
|
}
|
|
|
|
static void mt7601u_agc_tune(struct mt7601u_dev *dev)
|
|
{
|
|
u8 val = mt7601u_agc_default(dev);
|
|
long avg_rssi;
|
|
|
|
if (test_bit(MT7601U_STATE_SCANNING, &dev->state))
|
|
return;
|
|
|
|
/* Note: only in STA mode and not dozing; perhaps do this only if
|
|
* there is enough rssi updates since last run?
|
|
* Rssi updates are only on beacons and U2M so should work...
|
|
*/
|
|
spin_lock_bh(&dev->con_mon_lock);
|
|
avg_rssi = ewma_rssi_read(&dev->avg_rssi);
|
|
spin_unlock_bh(&dev->con_mon_lock);
|
|
if (avg_rssi == 0)
|
|
return;
|
|
|
|
avg_rssi = -avg_rssi;
|
|
if (avg_rssi <= -70)
|
|
val -= 0x20;
|
|
else if (avg_rssi <= -60)
|
|
val -= 0x10;
|
|
|
|
if (val != mt7601u_bbp_rr(dev, 66))
|
|
mt7601u_bbp_wr(dev, 66, val);
|
|
|
|
/* TODO: also if lost a lot of beacons try resetting
|
|
* (see RTMPSetAGCInitValue() call in mlme.c).
|
|
*/
|
|
}
|
|
|
|
static void mt7601u_phy_calibrate(struct work_struct *work)
|
|
{
|
|
struct mt7601u_dev *dev = container_of(work, struct mt7601u_dev,
|
|
cal_work.work);
|
|
|
|
mt7601u_agc_tune(dev);
|
|
mt7601u_tssi_cal(dev);
|
|
/* If TSSI calibration was run it already updated temperature. */
|
|
if (!dev->ee->tssi_enabled)
|
|
dev->raw_temp = mt7601u_read_temp(dev);
|
|
mt7601u_temp_comp(dev, true); /* TODO: find right value for @on */
|
|
|
|
ieee80211_queue_delayed_work(dev->hw, &dev->cal_work,
|
|
MT_CALIBRATE_INTERVAL);
|
|
}
|
|
|
|
static unsigned long
|
|
__mt7601u_phy_freq_cal(struct mt7601u_dev *dev, s8 last_offset, u8 phy_mode)
|
|
{
|
|
u8 activate_threshold, deactivate_threshold;
|
|
|
|
trace_freq_cal_offset(dev, phy_mode, last_offset);
|
|
|
|
/* No beacons received - reschedule soon */
|
|
if (last_offset == MT_FREQ_OFFSET_INVALID)
|
|
return MT_FREQ_CAL_ADJ_INTERVAL;
|
|
|
|
switch (phy_mode) {
|
|
case MT_PHY_TYPE_CCK:
|
|
activate_threshold = 19;
|
|
deactivate_threshold = 5;
|
|
break;
|
|
case MT_PHY_TYPE_OFDM:
|
|
activate_threshold = 102;
|
|
deactivate_threshold = 32;
|
|
break;
|
|
case MT_PHY_TYPE_HT:
|
|
case MT_PHY_TYPE_HT_GF:
|
|
activate_threshold = 82;
|
|
deactivate_threshold = 20;
|
|
break;
|
|
default:
|
|
WARN_ON(1);
|
|
return MT_FREQ_CAL_CHECK_INTERVAL;
|
|
}
|
|
|
|
if (abs(last_offset) >= activate_threshold)
|
|
dev->freq_cal.adjusting = true;
|
|
else if (abs(last_offset) <= deactivate_threshold)
|
|
dev->freq_cal.adjusting = false;
|
|
|
|
if (!dev->freq_cal.adjusting)
|
|
return MT_FREQ_CAL_CHECK_INTERVAL;
|
|
|
|
if (last_offset > deactivate_threshold) {
|
|
if (dev->freq_cal.freq > 0)
|
|
dev->freq_cal.freq--;
|
|
else
|
|
dev->freq_cal.adjusting = false;
|
|
} else if (last_offset < -deactivate_threshold) {
|
|
if (dev->freq_cal.freq < 0xbf)
|
|
dev->freq_cal.freq++;
|
|
else
|
|
dev->freq_cal.adjusting = false;
|
|
}
|
|
|
|
trace_freq_cal_adjust(dev, dev->freq_cal.freq);
|
|
mt7601u_rf_wr(dev, 0, 12, dev->freq_cal.freq);
|
|
mt7601u_vco_cal(dev);
|
|
|
|
return dev->freq_cal.adjusting ? MT_FREQ_CAL_ADJ_INTERVAL :
|
|
MT_FREQ_CAL_CHECK_INTERVAL;
|
|
}
|
|
|
|
static void mt7601u_phy_freq_cal(struct work_struct *work)
|
|
{
|
|
struct mt7601u_dev *dev = container_of(work, struct mt7601u_dev,
|
|
freq_cal.work.work);
|
|
s8 last_offset;
|
|
u8 phy_mode;
|
|
unsigned long delay;
|
|
|
|
spin_lock_bh(&dev->con_mon_lock);
|
|
last_offset = dev->bcn_freq_off;
|
|
phy_mode = dev->bcn_phy_mode;
|
|
spin_unlock_bh(&dev->con_mon_lock);
|
|
|
|
delay = __mt7601u_phy_freq_cal(dev, last_offset, phy_mode);
|
|
ieee80211_queue_delayed_work(dev->hw, &dev->freq_cal.work, delay);
|
|
|
|
spin_lock_bh(&dev->con_mon_lock);
|
|
dev->bcn_freq_off = MT_FREQ_OFFSET_INVALID;
|
|
spin_unlock_bh(&dev->con_mon_lock);
|
|
}
|
|
|
|
void mt7601u_phy_con_cal_onoff(struct mt7601u_dev *dev,
|
|
struct ieee80211_bss_conf *info)
|
|
{
|
|
struct ieee80211_vif *vif = container_of(info, struct ieee80211_vif,
|
|
bss_conf);
|
|
|
|
if (!vif->cfg.assoc)
|
|
cancel_delayed_work_sync(&dev->freq_cal.work);
|
|
|
|
/* Start/stop collecting beacon data */
|
|
spin_lock_bh(&dev->con_mon_lock);
|
|
ether_addr_copy(dev->ap_bssid, info->bssid);
|
|
ewma_rssi_init(&dev->avg_rssi);
|
|
dev->bcn_freq_off = MT_FREQ_OFFSET_INVALID;
|
|
spin_unlock_bh(&dev->con_mon_lock);
|
|
|
|
dev->freq_cal.freq = dev->ee->rf_freq_off;
|
|
dev->freq_cal.enabled = vif->cfg.assoc;
|
|
dev->freq_cal.adjusting = false;
|
|
|
|
if (vif->cfg.assoc)
|
|
ieee80211_queue_delayed_work(dev->hw, &dev->freq_cal.work,
|
|
MT_FREQ_CAL_INIT_DELAY);
|
|
}
|
|
|
|
static int mt7601u_init_cal(struct mt7601u_dev *dev)
|
|
{
|
|
u32 mac_ctrl;
|
|
int ret;
|
|
|
|
dev->raw_temp = mt7601u_read_bootup_temp(dev);
|
|
dev->curr_temp = (dev->raw_temp - dev->ee->ref_temp) *
|
|
MT_EE_TEMPERATURE_SLOPE;
|
|
dev->dpd_temp = dev->curr_temp;
|
|
|
|
mac_ctrl = mt7601u_rr(dev, MT_MAC_SYS_CTRL);
|
|
|
|
ret = mt7601u_mcu_calibrate(dev, MCU_CAL_R, 0);
|
|
if (ret)
|
|
return ret;
|
|
|
|
ret = mt7601u_rf_rr(dev, 0, 4);
|
|
if (ret < 0)
|
|
return ret;
|
|
ret |= 0x80;
|
|
ret = mt7601u_rf_wr(dev, 0, 4, ret);
|
|
if (ret)
|
|
return ret;
|
|
msleep(2);
|
|
|
|
ret = mt7601u_mcu_calibrate(dev, MCU_CAL_TXDCOC, 0);
|
|
if (ret)
|
|
return ret;
|
|
|
|
mt7601u_rxdc_cal(dev);
|
|
|
|
ret = mt7601u_set_bw_filter(dev, true);
|
|
if (ret)
|
|
return ret;
|
|
ret = mt7601u_mcu_calibrate(dev, MCU_CAL_LOFT, 0);
|
|
if (ret)
|
|
return ret;
|
|
ret = mt7601u_mcu_calibrate(dev, MCU_CAL_TXIQ, 0);
|
|
if (ret)
|
|
return ret;
|
|
ret = mt7601u_mcu_calibrate(dev, MCU_CAL_RXIQ, 0);
|
|
if (ret)
|
|
return ret;
|
|
ret = mt7601u_mcu_calibrate(dev, MCU_CAL_DPD, dev->dpd_temp);
|
|
if (ret)
|
|
return ret;
|
|
|
|
mt7601u_rxdc_cal(dev);
|
|
|
|
mt7601u_tssi_dc_gain_cal(dev);
|
|
|
|
mt7601u_wr(dev, MT_MAC_SYS_CTRL, mac_ctrl);
|
|
|
|
mt7601u_temp_comp(dev, true);
|
|
|
|
return 0;
|
|
}
|
|
|
|
int mt7601u_bbp_set_bw(struct mt7601u_dev *dev, int bw)
|
|
{
|
|
u32 val, old;
|
|
|
|
if (bw == dev->bw) {
|
|
/* Vendor driver does the rmc even when no change is needed. */
|
|
mt7601u_bbp_rmc(dev, 4, 0x18, bw == MT_BW_20 ? 0 : 0x10);
|
|
|
|
return 0;
|
|
}
|
|
dev->bw = bw;
|
|
|
|
/* Stop MAC for the time of bw change */
|
|
old = mt7601u_rr(dev, MT_MAC_SYS_CTRL);
|
|
val = old & ~(MT_MAC_SYS_CTRL_ENABLE_TX | MT_MAC_SYS_CTRL_ENABLE_RX);
|
|
mt7601u_wr(dev, MT_MAC_SYS_CTRL, val);
|
|
mt76_poll(dev, MT_MAC_STATUS, MT_MAC_STATUS_TX | MT_MAC_STATUS_RX,
|
|
0, 500000);
|
|
|
|
mt7601u_bbp_rmc(dev, 4, 0x18, bw == MT_BW_20 ? 0 : 0x10);
|
|
|
|
mt7601u_wr(dev, MT_MAC_SYS_CTRL, old);
|
|
|
|
return mt7601u_load_bbp_temp_table_bw(dev);
|
|
}
|
|
|
|
/**
|
|
* mt7601u_set_rx_path - set rx path in BBP
|
|
* @dev: pointer to adapter structure
|
|
* @path: rx path to set values are 0-based
|
|
*/
|
|
void mt7601u_set_rx_path(struct mt7601u_dev *dev, u8 path)
|
|
{
|
|
mt7601u_bbp_rmw(dev, 3, 0x18, path << 3);
|
|
}
|
|
|
|
/**
|
|
* mt7601u_set_tx_dac - set which tx DAC to use
|
|
* @dev: pointer to adapter structure
|
|
* @dac: DAC index, values are 0-based
|
|
*/
|
|
void mt7601u_set_tx_dac(struct mt7601u_dev *dev, u8 dac)
|
|
{
|
|
mt7601u_bbp_rmc(dev, 1, 0x18, dac << 3);
|
|
}
|
|
|
|
int mt7601u_phy_init(struct mt7601u_dev *dev)
|
|
{
|
|
int ret;
|
|
|
|
dev->rf_pa_mode[0] = mt7601u_rr(dev, MT_RF_PA_MODE_CFG0);
|
|
dev->rf_pa_mode[1] = mt7601u_rr(dev, MT_RF_PA_MODE_CFG1);
|
|
|
|
ret = mt7601u_rf_wr(dev, 0, 12, dev->ee->rf_freq_off);
|
|
if (ret)
|
|
return ret;
|
|
ret = mt7601u_write_reg_pairs(dev, 0, rf_central,
|
|
ARRAY_SIZE(rf_central));
|
|
if (ret)
|
|
return ret;
|
|
ret = mt7601u_write_reg_pairs(dev, 0, rf_channel,
|
|
ARRAY_SIZE(rf_channel));
|
|
if (ret)
|
|
return ret;
|
|
ret = mt7601u_write_reg_pairs(dev, 0, rf_vga, ARRAY_SIZE(rf_vga));
|
|
if (ret)
|
|
return ret;
|
|
|
|
ret = mt7601u_init_cal(dev);
|
|
if (ret)
|
|
return ret;
|
|
|
|
dev->prev_pwr_diff = 100;
|
|
|
|
INIT_DELAYED_WORK(&dev->cal_work, mt7601u_phy_calibrate);
|
|
INIT_DELAYED_WORK(&dev->freq_cal.work, mt7601u_phy_freq_cal);
|
|
|
|
return 0;
|
|
}
|