3452 lines
92 KiB
C
3452 lines
92 KiB
C
// SPDX-License-Identifier: GPL-2.0-only
|
|
/*
|
|
* NXP Wireless LAN device driver: PCIE specific handling
|
|
*
|
|
* Copyright 2011-2020 NXP
|
|
*/
|
|
|
|
#include <linux/iopoll.h>
|
|
#include <linux/firmware.h>
|
|
|
|
#include "decl.h"
|
|
#include "ioctl.h"
|
|
#include "util.h"
|
|
#include "fw.h"
|
|
#include "main.h"
|
|
#include "wmm.h"
|
|
#include "11n.h"
|
|
#include "pcie.h"
|
|
#include "pcie_quirks.h"
|
|
|
|
#define PCIE_VERSION "1.0"
|
|
#define DRV_NAME "Marvell mwifiex PCIe"
|
|
|
|
static struct mwifiex_if_ops pcie_ops;
|
|
|
|
static const struct mwifiex_pcie_card_reg mwifiex_reg_8766 = {
|
|
.cmd_addr_lo = PCIE_SCRATCH_0_REG,
|
|
.cmd_addr_hi = PCIE_SCRATCH_1_REG,
|
|
.cmd_size = PCIE_SCRATCH_2_REG,
|
|
.fw_status = PCIE_SCRATCH_3_REG,
|
|
.cmdrsp_addr_lo = PCIE_SCRATCH_4_REG,
|
|
.cmdrsp_addr_hi = PCIE_SCRATCH_5_REG,
|
|
.tx_rdptr = PCIE_SCRATCH_6_REG,
|
|
.tx_wrptr = PCIE_SCRATCH_7_REG,
|
|
.rx_rdptr = PCIE_SCRATCH_8_REG,
|
|
.rx_wrptr = PCIE_SCRATCH_9_REG,
|
|
.evt_rdptr = PCIE_SCRATCH_10_REG,
|
|
.evt_wrptr = PCIE_SCRATCH_11_REG,
|
|
.drv_rdy = PCIE_SCRATCH_12_REG,
|
|
.tx_start_ptr = 0,
|
|
.tx_mask = MWIFIEX_TXBD_MASK,
|
|
.tx_wrap_mask = 0,
|
|
.rx_mask = MWIFIEX_RXBD_MASK,
|
|
.rx_wrap_mask = 0,
|
|
.tx_rollover_ind = MWIFIEX_BD_FLAG_ROLLOVER_IND,
|
|
.rx_rollover_ind = MWIFIEX_BD_FLAG_ROLLOVER_IND,
|
|
.evt_rollover_ind = MWIFIEX_BD_FLAG_ROLLOVER_IND,
|
|
.ring_flag_sop = 0,
|
|
.ring_flag_eop = 0,
|
|
.ring_flag_xs_sop = 0,
|
|
.ring_flag_xs_eop = 0,
|
|
.ring_tx_start_ptr = 0,
|
|
.pfu_enabled = 0,
|
|
.sleep_cookie = 1,
|
|
.msix_support = 0,
|
|
};
|
|
|
|
static const struct mwifiex_pcie_card_reg mwifiex_reg_8897 = {
|
|
.cmd_addr_lo = PCIE_SCRATCH_0_REG,
|
|
.cmd_addr_hi = PCIE_SCRATCH_1_REG,
|
|
.cmd_size = PCIE_SCRATCH_2_REG,
|
|
.fw_status = PCIE_SCRATCH_3_REG,
|
|
.cmdrsp_addr_lo = PCIE_SCRATCH_4_REG,
|
|
.cmdrsp_addr_hi = PCIE_SCRATCH_5_REG,
|
|
.tx_rdptr = PCIE_RD_DATA_PTR_Q0_Q1,
|
|
.tx_wrptr = PCIE_WR_DATA_PTR_Q0_Q1,
|
|
.rx_rdptr = PCIE_WR_DATA_PTR_Q0_Q1,
|
|
.rx_wrptr = PCIE_RD_DATA_PTR_Q0_Q1,
|
|
.evt_rdptr = PCIE_SCRATCH_10_REG,
|
|
.evt_wrptr = PCIE_SCRATCH_11_REG,
|
|
.drv_rdy = PCIE_SCRATCH_12_REG,
|
|
.tx_start_ptr = 16,
|
|
.tx_mask = 0x03FF0000,
|
|
.tx_wrap_mask = 0x07FF0000,
|
|
.rx_mask = 0x000003FF,
|
|
.rx_wrap_mask = 0x000007FF,
|
|
.tx_rollover_ind = MWIFIEX_BD_FLAG_TX_ROLLOVER_IND,
|
|
.rx_rollover_ind = MWIFIEX_BD_FLAG_RX_ROLLOVER_IND,
|
|
.evt_rollover_ind = MWIFIEX_BD_FLAG_EVT_ROLLOVER_IND,
|
|
.ring_flag_sop = MWIFIEX_BD_FLAG_SOP,
|
|
.ring_flag_eop = MWIFIEX_BD_FLAG_EOP,
|
|
.ring_flag_xs_sop = MWIFIEX_BD_FLAG_XS_SOP,
|
|
.ring_flag_xs_eop = MWIFIEX_BD_FLAG_XS_EOP,
|
|
.ring_tx_start_ptr = MWIFIEX_BD_FLAG_TX_START_PTR,
|
|
.pfu_enabled = 1,
|
|
.sleep_cookie = 0,
|
|
.fw_dump_ctrl = PCIE_SCRATCH_13_REG,
|
|
.fw_dump_start = PCIE_SCRATCH_14_REG,
|
|
.fw_dump_end = 0xcff,
|
|
.fw_dump_host_ready = 0xee,
|
|
.fw_dump_read_done = 0xfe,
|
|
.msix_support = 0,
|
|
};
|
|
|
|
static const struct mwifiex_pcie_card_reg mwifiex_reg_8997 = {
|
|
.cmd_addr_lo = PCIE_SCRATCH_0_REG,
|
|
.cmd_addr_hi = PCIE_SCRATCH_1_REG,
|
|
.cmd_size = PCIE_SCRATCH_2_REG,
|
|
.fw_status = PCIE_SCRATCH_3_REG,
|
|
.cmdrsp_addr_lo = PCIE_SCRATCH_4_REG,
|
|
.cmdrsp_addr_hi = PCIE_SCRATCH_5_REG,
|
|
.tx_rdptr = 0xC1A4,
|
|
.tx_wrptr = 0xC174,
|
|
.rx_rdptr = 0xC174,
|
|
.rx_wrptr = 0xC1A4,
|
|
.evt_rdptr = PCIE_SCRATCH_10_REG,
|
|
.evt_wrptr = PCIE_SCRATCH_11_REG,
|
|
.drv_rdy = PCIE_SCRATCH_12_REG,
|
|
.tx_start_ptr = 16,
|
|
.tx_mask = 0x0FFF0000,
|
|
.tx_wrap_mask = 0x1FFF0000,
|
|
.rx_mask = 0x00000FFF,
|
|
.rx_wrap_mask = 0x00001FFF,
|
|
.tx_rollover_ind = BIT(28),
|
|
.rx_rollover_ind = BIT(12),
|
|
.evt_rollover_ind = MWIFIEX_BD_FLAG_EVT_ROLLOVER_IND,
|
|
.ring_flag_sop = MWIFIEX_BD_FLAG_SOP,
|
|
.ring_flag_eop = MWIFIEX_BD_FLAG_EOP,
|
|
.ring_flag_xs_sop = MWIFIEX_BD_FLAG_XS_SOP,
|
|
.ring_flag_xs_eop = MWIFIEX_BD_FLAG_XS_EOP,
|
|
.ring_tx_start_ptr = MWIFIEX_BD_FLAG_TX_START_PTR,
|
|
.pfu_enabled = 1,
|
|
.sleep_cookie = 0,
|
|
.fw_dump_ctrl = PCIE_SCRATCH_13_REG,
|
|
.fw_dump_start = PCIE_SCRATCH_14_REG,
|
|
.fw_dump_end = 0xcff,
|
|
.fw_dump_host_ready = 0xcc,
|
|
.fw_dump_read_done = 0xdd,
|
|
.msix_support = 0,
|
|
};
|
|
|
|
static struct memory_type_mapping mem_type_mapping_tbl_w8897[] = {
|
|
{"ITCM", NULL, 0, 0xF0},
|
|
{"DTCM", NULL, 0, 0xF1},
|
|
{"SQRAM", NULL, 0, 0xF2},
|
|
{"IRAM", NULL, 0, 0xF3},
|
|
{"APU", NULL, 0, 0xF4},
|
|
{"CIU", NULL, 0, 0xF5},
|
|
{"ICU", NULL, 0, 0xF6},
|
|
{"MAC", NULL, 0, 0xF7},
|
|
};
|
|
|
|
static struct memory_type_mapping mem_type_mapping_tbl_w8997[] = {
|
|
{"DUMP", NULL, 0, 0xDD},
|
|
};
|
|
|
|
static const struct mwifiex_pcie_device mwifiex_pcie8766 = {
|
|
.reg = &mwifiex_reg_8766,
|
|
.blksz_fw_dl = MWIFIEX_PCIE_BLOCK_SIZE_FW_DNLD,
|
|
.tx_buf_size = MWIFIEX_TX_DATA_BUF_SIZE_2K,
|
|
.can_dump_fw = false,
|
|
.can_ext_scan = true,
|
|
};
|
|
|
|
static const struct mwifiex_pcie_device mwifiex_pcie8897 = {
|
|
.reg = &mwifiex_reg_8897,
|
|
.blksz_fw_dl = MWIFIEX_PCIE_BLOCK_SIZE_FW_DNLD,
|
|
.tx_buf_size = MWIFIEX_TX_DATA_BUF_SIZE_4K,
|
|
.can_dump_fw = true,
|
|
.mem_type_mapping_tbl = mem_type_mapping_tbl_w8897,
|
|
.num_mem_types = ARRAY_SIZE(mem_type_mapping_tbl_w8897),
|
|
.can_ext_scan = true,
|
|
};
|
|
|
|
static const struct mwifiex_pcie_device mwifiex_pcie8997 = {
|
|
.reg = &mwifiex_reg_8997,
|
|
.blksz_fw_dl = MWIFIEX_PCIE_BLOCK_SIZE_FW_DNLD,
|
|
.tx_buf_size = MWIFIEX_TX_DATA_BUF_SIZE_4K,
|
|
.can_dump_fw = true,
|
|
.mem_type_mapping_tbl = mem_type_mapping_tbl_w8997,
|
|
.num_mem_types = ARRAY_SIZE(mem_type_mapping_tbl_w8997),
|
|
.can_ext_scan = true,
|
|
};
|
|
|
|
static const struct of_device_id mwifiex_pcie_of_match_table[] __maybe_unused = {
|
|
{ .compatible = "pci11ab,2b42" },
|
|
{ .compatible = "pci1b4b,2b42" },
|
|
{ }
|
|
};
|
|
|
|
static int mwifiex_pcie_probe_of(struct device *dev)
|
|
{
|
|
if (!of_match_node(mwifiex_pcie_of_match_table, dev->of_node)) {
|
|
dev_err(dev, "required compatible string missing\n");
|
|
return -EINVAL;
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
static void mwifiex_pcie_work(struct work_struct *work);
|
|
static int mwifiex_pcie_delete_rxbd_ring(struct mwifiex_adapter *adapter);
|
|
static int mwifiex_pcie_delete_evtbd_ring(struct mwifiex_adapter *adapter);
|
|
|
|
static int
|
|
mwifiex_map_pci_memory(struct mwifiex_adapter *adapter, struct sk_buff *skb,
|
|
size_t size, int flags)
|
|
{
|
|
struct pcie_service_card *card = adapter->card;
|
|
struct mwifiex_dma_mapping mapping;
|
|
|
|
mapping.addr = dma_map_single(&card->dev->dev, skb->data, size, flags);
|
|
if (dma_mapping_error(&card->dev->dev, mapping.addr)) {
|
|
mwifiex_dbg(adapter, ERROR, "failed to map pci memory!\n");
|
|
return -1;
|
|
}
|
|
mapping.len = size;
|
|
mwifiex_store_mapping(skb, &mapping);
|
|
return 0;
|
|
}
|
|
|
|
static void mwifiex_unmap_pci_memory(struct mwifiex_adapter *adapter,
|
|
struct sk_buff *skb, int flags)
|
|
{
|
|
struct pcie_service_card *card = adapter->card;
|
|
struct mwifiex_dma_mapping mapping;
|
|
|
|
mwifiex_get_mapping(skb, &mapping);
|
|
dma_unmap_single(&card->dev->dev, mapping.addr, mapping.len, flags);
|
|
}
|
|
|
|
/*
|
|
* This function writes data into PCIE card register.
|
|
*/
|
|
static int mwifiex_write_reg(struct mwifiex_adapter *adapter, int reg, u32 data)
|
|
{
|
|
struct pcie_service_card *card = adapter->card;
|
|
|
|
iowrite32(data, card->pci_mmap1 + reg);
|
|
|
|
return 0;
|
|
}
|
|
|
|
/* This function reads data from PCIE card register.
|
|
*/
|
|
static int mwifiex_read_reg(struct mwifiex_adapter *adapter, int reg, u32 *data)
|
|
{
|
|
struct pcie_service_card *card = adapter->card;
|
|
|
|
*data = ioread32(card->pci_mmap1 + reg);
|
|
if (*data == 0xffffffff)
|
|
return 0xffffffff;
|
|
|
|
return 0;
|
|
}
|
|
|
|
/* This function reads u8 data from PCIE card register. */
|
|
static int mwifiex_read_reg_byte(struct mwifiex_adapter *adapter,
|
|
int reg, u8 *data)
|
|
{
|
|
struct pcie_service_card *card = adapter->card;
|
|
|
|
*data = ioread8(card->pci_mmap1 + reg);
|
|
|
|
return 0;
|
|
}
|
|
|
|
/*
|
|
* This function reads sleep cookie and checks if FW is ready
|
|
*/
|
|
static bool mwifiex_pcie_ok_to_access_hw(struct mwifiex_adapter *adapter)
|
|
{
|
|
u32 cookie_value;
|
|
struct pcie_service_card *card = adapter->card;
|
|
const struct mwifiex_pcie_card_reg *reg = card->pcie.reg;
|
|
|
|
if (!reg->sleep_cookie)
|
|
return true;
|
|
|
|
if (card->sleep_cookie_vbase) {
|
|
cookie_value = get_unaligned_le32(card->sleep_cookie_vbase);
|
|
mwifiex_dbg(adapter, INFO,
|
|
"info: ACCESS_HW: sleep cookie=0x%x\n",
|
|
cookie_value);
|
|
if (cookie_value == FW_AWAKE_COOKIE)
|
|
return true;
|
|
}
|
|
|
|
return false;
|
|
}
|
|
|
|
#ifdef CONFIG_PM_SLEEP
|
|
/*
|
|
* Kernel needs to suspend all functions separately. Therefore all
|
|
* registered functions must have drivers with suspend and resume
|
|
* methods. Failing that the kernel simply removes the whole card.
|
|
*
|
|
* If already not suspended, this function allocates and sends a host
|
|
* sleep activate request to the firmware and turns off the traffic.
|
|
*/
|
|
static int mwifiex_pcie_suspend(struct device *dev)
|
|
{
|
|
struct mwifiex_adapter *adapter;
|
|
struct pcie_service_card *card = dev_get_drvdata(dev);
|
|
|
|
|
|
/* Might still be loading firmware */
|
|
wait_for_completion(&card->fw_done);
|
|
|
|
adapter = card->adapter;
|
|
if (!adapter) {
|
|
dev_err(dev, "adapter is not valid\n");
|
|
return 0;
|
|
}
|
|
|
|
mwifiex_enable_wake(adapter);
|
|
|
|
/* Enable the Host Sleep */
|
|
if (!mwifiex_enable_hs(adapter)) {
|
|
mwifiex_dbg(adapter, ERROR,
|
|
"cmd: failed to suspend\n");
|
|
clear_bit(MWIFIEX_IS_HS_ENABLING, &adapter->work_flags);
|
|
mwifiex_disable_wake(adapter);
|
|
return -EFAULT;
|
|
}
|
|
|
|
flush_workqueue(adapter->workqueue);
|
|
|
|
/* Indicate device suspended */
|
|
set_bit(MWIFIEX_IS_SUSPENDED, &adapter->work_flags);
|
|
clear_bit(MWIFIEX_IS_HS_ENABLING, &adapter->work_flags);
|
|
|
|
return 0;
|
|
}
|
|
|
|
/*
|
|
* Kernel needs to suspend all functions separately. Therefore all
|
|
* registered functions must have drivers with suspend and resume
|
|
* methods. Failing that the kernel simply removes the whole card.
|
|
*
|
|
* If already not resumed, this function turns on the traffic and
|
|
* sends a host sleep cancel request to the firmware.
|
|
*/
|
|
static int mwifiex_pcie_resume(struct device *dev)
|
|
{
|
|
struct mwifiex_adapter *adapter;
|
|
struct pcie_service_card *card = dev_get_drvdata(dev);
|
|
|
|
|
|
if (!card->adapter) {
|
|
dev_err(dev, "adapter structure is not valid\n");
|
|
return 0;
|
|
}
|
|
|
|
adapter = card->adapter;
|
|
|
|
if (!test_bit(MWIFIEX_IS_SUSPENDED, &adapter->work_flags)) {
|
|
mwifiex_dbg(adapter, WARN,
|
|
"Device already resumed\n");
|
|
return 0;
|
|
}
|
|
|
|
clear_bit(MWIFIEX_IS_SUSPENDED, &adapter->work_flags);
|
|
|
|
mwifiex_cancel_hs(mwifiex_get_priv(adapter, MWIFIEX_BSS_ROLE_STA),
|
|
MWIFIEX_ASYNC_CMD);
|
|
mwifiex_disable_wake(adapter);
|
|
|
|
return 0;
|
|
}
|
|
#endif
|
|
|
|
/*
|
|
* This function probes an mwifiex device and registers it. It allocates
|
|
* the card structure, enables PCIE function number and initiates the
|
|
* device registration and initialization procedure by adding a logical
|
|
* interface.
|
|
*/
|
|
static int mwifiex_pcie_probe(struct pci_dev *pdev,
|
|
const struct pci_device_id *ent)
|
|
{
|
|
struct pcie_service_card *card;
|
|
int ret;
|
|
|
|
pr_debug("info: vendor=0x%4.04X device=0x%4.04X rev=%d\n",
|
|
pdev->vendor, pdev->device, pdev->revision);
|
|
|
|
card = devm_kzalloc(&pdev->dev, sizeof(*card), GFP_KERNEL);
|
|
if (!card)
|
|
return -ENOMEM;
|
|
|
|
init_completion(&card->fw_done);
|
|
|
|
card->dev = pdev;
|
|
|
|
if (ent->driver_data) {
|
|
struct mwifiex_pcie_device *data = (void *)ent->driver_data;
|
|
card->pcie.reg = data->reg;
|
|
card->pcie.blksz_fw_dl = data->blksz_fw_dl;
|
|
card->pcie.tx_buf_size = data->tx_buf_size;
|
|
card->pcie.can_dump_fw = data->can_dump_fw;
|
|
card->pcie.mem_type_mapping_tbl = data->mem_type_mapping_tbl;
|
|
card->pcie.num_mem_types = data->num_mem_types;
|
|
card->pcie.can_ext_scan = data->can_ext_scan;
|
|
INIT_WORK(&card->work, mwifiex_pcie_work);
|
|
}
|
|
|
|
/* device tree node parsing and platform specific configuration*/
|
|
if (pdev->dev.of_node) {
|
|
ret = mwifiex_pcie_probe_of(&pdev->dev);
|
|
if (ret)
|
|
return ret;
|
|
}
|
|
|
|
/* check quirks */
|
|
mwifiex_initialize_quirks(card);
|
|
|
|
if (mwifiex_add_card(card, &card->fw_done, &pcie_ops,
|
|
MWIFIEX_PCIE, &pdev->dev)) {
|
|
pr_err("%s failed\n", __func__);
|
|
return -1;
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
/*
|
|
* This function removes the interface and frees up the card structure.
|
|
*/
|
|
static void mwifiex_pcie_remove(struct pci_dev *pdev)
|
|
{
|
|
struct pcie_service_card *card;
|
|
struct mwifiex_adapter *adapter;
|
|
struct mwifiex_private *priv;
|
|
const struct mwifiex_pcie_card_reg *reg;
|
|
u32 fw_status;
|
|
|
|
card = pci_get_drvdata(pdev);
|
|
|
|
wait_for_completion(&card->fw_done);
|
|
|
|
adapter = card->adapter;
|
|
if (!adapter || !adapter->priv_num)
|
|
return;
|
|
|
|
reg = card->pcie.reg;
|
|
if (reg)
|
|
mwifiex_read_reg(adapter, reg->fw_status, &fw_status);
|
|
else
|
|
fw_status = -1;
|
|
|
|
if (fw_status == FIRMWARE_READY_PCIE && !adapter->mfg_mode) {
|
|
mwifiex_deauthenticate_all(adapter);
|
|
|
|
priv = mwifiex_get_priv(adapter, MWIFIEX_BSS_ROLE_ANY);
|
|
|
|
mwifiex_disable_auto_ds(priv);
|
|
|
|
mwifiex_init_shutdown_fw(priv, MWIFIEX_FUNC_SHUTDOWN);
|
|
}
|
|
|
|
mwifiex_remove_card(adapter);
|
|
}
|
|
|
|
static void mwifiex_pcie_shutdown(struct pci_dev *pdev)
|
|
{
|
|
mwifiex_pcie_remove(pdev);
|
|
|
|
return;
|
|
}
|
|
|
|
static void mwifiex_pcie_coredump(struct device *dev)
|
|
{
|
|
struct pci_dev *pdev;
|
|
struct pcie_service_card *card;
|
|
|
|
pdev = container_of(dev, struct pci_dev, dev);
|
|
card = pci_get_drvdata(pdev);
|
|
|
|
if (!test_and_set_bit(MWIFIEX_IFACE_WORK_DEVICE_DUMP,
|
|
&card->work_flags))
|
|
schedule_work(&card->work);
|
|
}
|
|
|
|
static const struct pci_device_id mwifiex_ids[] = {
|
|
{
|
|
PCIE_VENDOR_ID_MARVELL, PCIE_DEVICE_ID_MARVELL_88W8766P,
|
|
PCI_ANY_ID, PCI_ANY_ID, 0, 0,
|
|
.driver_data = (unsigned long)&mwifiex_pcie8766,
|
|
},
|
|
{
|
|
PCIE_VENDOR_ID_MARVELL, PCIE_DEVICE_ID_MARVELL_88W8897,
|
|
PCI_ANY_ID, PCI_ANY_ID, 0, 0,
|
|
.driver_data = (unsigned long)&mwifiex_pcie8897,
|
|
},
|
|
{
|
|
PCIE_VENDOR_ID_MARVELL, PCIE_DEVICE_ID_MARVELL_88W8997,
|
|
PCI_ANY_ID, PCI_ANY_ID, 0, 0,
|
|
.driver_data = (unsigned long)&mwifiex_pcie8997,
|
|
},
|
|
{
|
|
PCIE_VENDOR_ID_V2_MARVELL, PCIE_DEVICE_ID_MARVELL_88W8997,
|
|
PCI_ANY_ID, PCI_ANY_ID, 0, 0,
|
|
.driver_data = (unsigned long)&mwifiex_pcie8997,
|
|
},
|
|
{},
|
|
};
|
|
|
|
MODULE_DEVICE_TABLE(pci, mwifiex_ids);
|
|
|
|
/*
|
|
* Cleanup all software without cleaning anything related to PCIe and HW.
|
|
*/
|
|
static void mwifiex_pcie_reset_prepare(struct pci_dev *pdev)
|
|
{
|
|
struct pcie_service_card *card = pci_get_drvdata(pdev);
|
|
struct mwifiex_adapter *adapter = card->adapter;
|
|
|
|
if (!adapter) {
|
|
dev_err(&pdev->dev, "%s: adapter structure is not valid\n",
|
|
__func__);
|
|
return;
|
|
}
|
|
|
|
mwifiex_dbg(adapter, INFO,
|
|
"%s: vendor=0x%4.04x device=0x%4.04x rev=%d Pre-FLR\n",
|
|
__func__, pdev->vendor, pdev->device, pdev->revision);
|
|
|
|
mwifiex_shutdown_sw(adapter);
|
|
clear_bit(MWIFIEX_IFACE_WORK_DEVICE_DUMP, &card->work_flags);
|
|
clear_bit(MWIFIEX_IFACE_WORK_CARD_RESET, &card->work_flags);
|
|
|
|
/* On MS Surface gen4+ devices FLR isn't effective to recover from
|
|
* hangups, so we power-cycle the card instead.
|
|
*/
|
|
if (card->quirks & QUIRK_FW_RST_D3COLD)
|
|
mwifiex_pcie_reset_d3cold_quirk(pdev);
|
|
|
|
mwifiex_dbg(adapter, INFO, "%s, successful\n", __func__);
|
|
|
|
card->pci_reset_ongoing = true;
|
|
}
|
|
|
|
/*
|
|
* Kernel stores and restores PCIe function context before and after performing
|
|
* FLR respectively. Reconfigure the software and firmware including firmware
|
|
* redownload.
|
|
*/
|
|
static void mwifiex_pcie_reset_done(struct pci_dev *pdev)
|
|
{
|
|
struct pcie_service_card *card = pci_get_drvdata(pdev);
|
|
struct mwifiex_adapter *adapter = card->adapter;
|
|
int ret;
|
|
|
|
if (!adapter) {
|
|
dev_err(&pdev->dev, "%s: adapter structure is not valid\n",
|
|
__func__);
|
|
return;
|
|
}
|
|
|
|
mwifiex_dbg(adapter, INFO,
|
|
"%s: vendor=0x%4.04x device=0x%4.04x rev=%d Post-FLR\n",
|
|
__func__, pdev->vendor, pdev->device, pdev->revision);
|
|
|
|
ret = mwifiex_reinit_sw(adapter);
|
|
if (ret)
|
|
dev_err(&pdev->dev, "reinit failed: %d\n", ret);
|
|
else
|
|
mwifiex_dbg(adapter, INFO, "%s, successful\n", __func__);
|
|
|
|
card->pci_reset_ongoing = false;
|
|
}
|
|
|
|
static const struct pci_error_handlers mwifiex_pcie_err_handler = {
|
|
.reset_prepare = mwifiex_pcie_reset_prepare,
|
|
.reset_done = mwifiex_pcie_reset_done,
|
|
};
|
|
|
|
#ifdef CONFIG_PM_SLEEP
|
|
/* Power Management Hooks */
|
|
static SIMPLE_DEV_PM_OPS(mwifiex_pcie_pm_ops, mwifiex_pcie_suspend,
|
|
mwifiex_pcie_resume);
|
|
#endif
|
|
|
|
/* PCI Device Driver */
|
|
static struct pci_driver mwifiex_pcie = {
|
|
.name = "mwifiex_pcie",
|
|
.id_table = mwifiex_ids,
|
|
.probe = mwifiex_pcie_probe,
|
|
.remove = mwifiex_pcie_remove,
|
|
.driver = {
|
|
.coredump = mwifiex_pcie_coredump,
|
|
#ifdef CONFIG_PM_SLEEP
|
|
.pm = &mwifiex_pcie_pm_ops,
|
|
#endif
|
|
},
|
|
.shutdown = mwifiex_pcie_shutdown,
|
|
.err_handler = &mwifiex_pcie_err_handler,
|
|
};
|
|
|
|
/*
|
|
* This function adds delay loop to ensure FW is awake before proceeding.
|
|
*/
|
|
static void mwifiex_pcie_dev_wakeup_delay(struct mwifiex_adapter *adapter)
|
|
{
|
|
int i = 0;
|
|
|
|
while (mwifiex_pcie_ok_to_access_hw(adapter)) {
|
|
i++;
|
|
usleep_range(10, 20);
|
|
/* 50ms max wait */
|
|
if (i == 5000)
|
|
break;
|
|
}
|
|
|
|
return;
|
|
}
|
|
|
|
static void mwifiex_delay_for_sleep_cookie(struct mwifiex_adapter *adapter,
|
|
u32 max_delay_loop_cnt)
|
|
{
|
|
struct pcie_service_card *card = adapter->card;
|
|
u8 *buffer;
|
|
u32 sleep_cookie, count;
|
|
struct sk_buff *cmdrsp = card->cmdrsp_buf;
|
|
|
|
for (count = 0; count < max_delay_loop_cnt; count++) {
|
|
dma_sync_single_for_cpu(&card->dev->dev,
|
|
MWIFIEX_SKB_DMA_ADDR(cmdrsp),
|
|
sizeof(sleep_cookie), DMA_FROM_DEVICE);
|
|
buffer = cmdrsp->data;
|
|
sleep_cookie = get_unaligned_le32(buffer);
|
|
|
|
if (sleep_cookie == MWIFIEX_DEF_SLEEP_COOKIE) {
|
|
mwifiex_dbg(adapter, INFO,
|
|
"sleep cookie found at count %d\n", count);
|
|
break;
|
|
}
|
|
dma_sync_single_for_device(&card->dev->dev,
|
|
MWIFIEX_SKB_DMA_ADDR(cmdrsp),
|
|
sizeof(sleep_cookie),
|
|
DMA_FROM_DEVICE);
|
|
usleep_range(20, 30);
|
|
}
|
|
|
|
if (count >= max_delay_loop_cnt)
|
|
mwifiex_dbg(adapter, INFO,
|
|
"max count reached while accessing sleep cookie\n");
|
|
}
|
|
|
|
#define N_WAKEUP_TRIES_SHORT_INTERVAL 15
|
|
#define N_WAKEUP_TRIES_LONG_INTERVAL 35
|
|
|
|
/* This function wakes up the card by reading fw_status register. */
|
|
static int mwifiex_pm_wakeup_card(struct mwifiex_adapter *adapter)
|
|
{
|
|
struct pcie_service_card *card = adapter->card;
|
|
const struct mwifiex_pcie_card_reg *reg = card->pcie.reg;
|
|
int retval __maybe_unused;
|
|
|
|
mwifiex_dbg(adapter, EVENT,
|
|
"event: Wakeup device...\n");
|
|
|
|
if (reg->sleep_cookie)
|
|
mwifiex_pcie_dev_wakeup_delay(adapter);
|
|
|
|
/* The 88W8897 PCIe+USB firmware (latest version 15.68.19.p21) sometimes
|
|
* appears to ignore or miss our wakeup request, so we continue trying
|
|
* until we receive an interrupt from the card.
|
|
*/
|
|
if (read_poll_timeout(mwifiex_write_reg, retval,
|
|
READ_ONCE(adapter->int_status) != 0,
|
|
500, 500 * N_WAKEUP_TRIES_SHORT_INTERVAL,
|
|
false,
|
|
adapter, reg->fw_status, FIRMWARE_READY_PCIE)) {
|
|
if (read_poll_timeout(mwifiex_write_reg, retval,
|
|
READ_ONCE(adapter->int_status) != 0,
|
|
10000, 10000 * N_WAKEUP_TRIES_LONG_INTERVAL,
|
|
false,
|
|
adapter, reg->fw_status, FIRMWARE_READY_PCIE)) {
|
|
mwifiex_dbg(adapter, ERROR,
|
|
"Firmware didn't wake up\n");
|
|
return -EIO;
|
|
}
|
|
}
|
|
|
|
if (reg->sleep_cookie) {
|
|
mwifiex_pcie_dev_wakeup_delay(adapter);
|
|
mwifiex_dbg(adapter, INFO,
|
|
"PCIE wakeup: Setting PS_STATE_AWAKE\n");
|
|
adapter->ps_state = PS_STATE_AWAKE;
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
/*
|
|
* This function is called after the card has woken up.
|
|
*
|
|
* The card configuration register is reset.
|
|
*/
|
|
static int mwifiex_pm_wakeup_card_complete(struct mwifiex_adapter *adapter)
|
|
{
|
|
mwifiex_dbg(adapter, CMD,
|
|
"cmd: Wakeup device completed\n");
|
|
|
|
return 0;
|
|
}
|
|
|
|
/*
|
|
* This function disables the host interrupt.
|
|
*
|
|
* The host interrupt mask is read, the disable bit is reset and
|
|
* written back to the card host interrupt mask register.
|
|
*/
|
|
static int mwifiex_pcie_disable_host_int(struct mwifiex_adapter *adapter)
|
|
{
|
|
if (mwifiex_pcie_ok_to_access_hw(adapter)) {
|
|
if (mwifiex_write_reg(adapter, PCIE_HOST_INT_MASK,
|
|
0x00000000)) {
|
|
mwifiex_dbg(adapter, ERROR,
|
|
"Disable host interrupt failed\n");
|
|
return -1;
|
|
}
|
|
}
|
|
|
|
atomic_set(&adapter->tx_hw_pending, 0);
|
|
return 0;
|
|
}
|
|
|
|
static void mwifiex_pcie_disable_host_int_noerr(struct mwifiex_adapter *adapter)
|
|
{
|
|
WARN_ON(mwifiex_pcie_disable_host_int(adapter));
|
|
}
|
|
|
|
/*
|
|
* This function enables the host interrupt.
|
|
*
|
|
* The host interrupt enable mask is written to the card
|
|
* host interrupt mask register.
|
|
*/
|
|
static int mwifiex_pcie_enable_host_int(struct mwifiex_adapter *adapter)
|
|
{
|
|
if (mwifiex_pcie_ok_to_access_hw(adapter)) {
|
|
/* Simply write the mask to the register */
|
|
if (mwifiex_write_reg(adapter, PCIE_HOST_INT_MASK,
|
|
HOST_INTR_MASK)) {
|
|
mwifiex_dbg(adapter, ERROR,
|
|
"Enable host interrupt failed\n");
|
|
return -1;
|
|
}
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
/*
|
|
* This function initializes TX buffer ring descriptors
|
|
*/
|
|
static int mwifiex_init_txq_ring(struct mwifiex_adapter *adapter)
|
|
{
|
|
struct pcie_service_card *card = adapter->card;
|
|
const struct mwifiex_pcie_card_reg *reg = card->pcie.reg;
|
|
struct mwifiex_pcie_buf_desc *desc;
|
|
struct mwifiex_pfu_buf_desc *desc2;
|
|
int i;
|
|
|
|
for (i = 0; i < MWIFIEX_MAX_TXRX_BD; i++) {
|
|
card->tx_buf_list[i] = NULL;
|
|
if (reg->pfu_enabled) {
|
|
card->txbd_ring[i] = (void *)card->txbd_ring_vbase +
|
|
(sizeof(*desc2) * i);
|
|
desc2 = card->txbd_ring[i];
|
|
memset(desc2, 0, sizeof(*desc2));
|
|
} else {
|
|
card->txbd_ring[i] = (void *)card->txbd_ring_vbase +
|
|
(sizeof(*desc) * i);
|
|
desc = card->txbd_ring[i];
|
|
memset(desc, 0, sizeof(*desc));
|
|
}
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
/* This function initializes RX buffer ring descriptors. Each SKB is allocated
|
|
* here and after mapping PCI memory, its physical address is assigned to
|
|
* PCIE Rx buffer descriptor's physical address.
|
|
*/
|
|
static int mwifiex_init_rxq_ring(struct mwifiex_adapter *adapter)
|
|
{
|
|
struct pcie_service_card *card = adapter->card;
|
|
const struct mwifiex_pcie_card_reg *reg = card->pcie.reg;
|
|
struct sk_buff *skb;
|
|
struct mwifiex_pcie_buf_desc *desc;
|
|
struct mwifiex_pfu_buf_desc *desc2;
|
|
dma_addr_t buf_pa;
|
|
int i;
|
|
|
|
for (i = 0; i < MWIFIEX_MAX_TXRX_BD; i++) {
|
|
/* Allocate skb here so that firmware can DMA data from it */
|
|
skb = mwifiex_alloc_dma_align_buf(MWIFIEX_RX_DATA_BUF_SIZE,
|
|
GFP_KERNEL);
|
|
if (!skb) {
|
|
mwifiex_dbg(adapter, ERROR,
|
|
"Unable to allocate skb for RX ring.\n");
|
|
return -ENOMEM;
|
|
}
|
|
|
|
if (mwifiex_map_pci_memory(adapter, skb,
|
|
MWIFIEX_RX_DATA_BUF_SIZE,
|
|
DMA_FROM_DEVICE)) {
|
|
kfree_skb(skb);
|
|
return -ENOMEM;
|
|
}
|
|
|
|
buf_pa = MWIFIEX_SKB_DMA_ADDR(skb);
|
|
|
|
mwifiex_dbg(adapter, INFO,
|
|
"info: RX ring: skb=%p len=%d data=%p buf_pa=%#x:%x\n",
|
|
skb, skb->len, skb->data, (u32)buf_pa,
|
|
(u32)((u64)buf_pa >> 32));
|
|
|
|
card->rx_buf_list[i] = skb;
|
|
if (reg->pfu_enabled) {
|
|
card->rxbd_ring[i] = (void *)card->rxbd_ring_vbase +
|
|
(sizeof(*desc2) * i);
|
|
desc2 = card->rxbd_ring[i];
|
|
desc2->paddr = buf_pa;
|
|
desc2->len = (u16)skb->len;
|
|
desc2->frag_len = (u16)skb->len;
|
|
desc2->flags = reg->ring_flag_eop | reg->ring_flag_sop;
|
|
desc2->offset = 0;
|
|
} else {
|
|
card->rxbd_ring[i] = (void *)(card->rxbd_ring_vbase +
|
|
(sizeof(*desc) * i));
|
|
desc = card->rxbd_ring[i];
|
|
desc->paddr = buf_pa;
|
|
desc->len = (u16)skb->len;
|
|
desc->flags = 0;
|
|
}
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
/* This function initializes event buffer ring descriptors. Each SKB is
|
|
* allocated here and after mapping PCI memory, its physical address is assigned
|
|
* to PCIE Rx buffer descriptor's physical address
|
|
*/
|
|
static int mwifiex_pcie_init_evt_ring(struct mwifiex_adapter *adapter)
|
|
{
|
|
struct pcie_service_card *card = adapter->card;
|
|
struct mwifiex_evt_buf_desc *desc;
|
|
struct sk_buff *skb;
|
|
dma_addr_t buf_pa;
|
|
int i;
|
|
|
|
for (i = 0; i < MWIFIEX_MAX_EVT_BD; i++) {
|
|
/* Allocate skb here so that firmware can DMA data from it */
|
|
skb = dev_alloc_skb(MAX_EVENT_SIZE);
|
|
if (!skb) {
|
|
mwifiex_dbg(adapter, ERROR,
|
|
"Unable to allocate skb for EVENT buf.\n");
|
|
return -ENOMEM;
|
|
}
|
|
skb_put(skb, MAX_EVENT_SIZE);
|
|
|
|
if (mwifiex_map_pci_memory(adapter, skb, MAX_EVENT_SIZE,
|
|
DMA_FROM_DEVICE)) {
|
|
kfree_skb(skb);
|
|
return -ENOMEM;
|
|
}
|
|
|
|
buf_pa = MWIFIEX_SKB_DMA_ADDR(skb);
|
|
|
|
mwifiex_dbg(adapter, EVENT,
|
|
"info: EVT ring: skb=%p len=%d data=%p buf_pa=%#x:%x\n",
|
|
skb, skb->len, skb->data, (u32)buf_pa,
|
|
(u32)((u64)buf_pa >> 32));
|
|
|
|
card->evt_buf_list[i] = skb;
|
|
card->evtbd_ring[i] = (void *)(card->evtbd_ring_vbase +
|
|
(sizeof(*desc) * i));
|
|
desc = card->evtbd_ring[i];
|
|
desc->paddr = buf_pa;
|
|
desc->len = (u16)skb->len;
|
|
desc->flags = 0;
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
/* This function cleans up TX buffer rings. If any of the buffer list has valid
|
|
* SKB address, associated SKB is freed.
|
|
*/
|
|
static void mwifiex_cleanup_txq_ring(struct mwifiex_adapter *adapter)
|
|
{
|
|
struct pcie_service_card *card = adapter->card;
|
|
const struct mwifiex_pcie_card_reg *reg = card->pcie.reg;
|
|
struct sk_buff *skb;
|
|
struct mwifiex_pcie_buf_desc *desc;
|
|
struct mwifiex_pfu_buf_desc *desc2;
|
|
int i;
|
|
|
|
for (i = 0; i < MWIFIEX_MAX_TXRX_BD; i++) {
|
|
if (reg->pfu_enabled) {
|
|
desc2 = card->txbd_ring[i];
|
|
if (card->tx_buf_list[i]) {
|
|
skb = card->tx_buf_list[i];
|
|
mwifiex_unmap_pci_memory(adapter, skb,
|
|
DMA_TO_DEVICE);
|
|
dev_kfree_skb_any(skb);
|
|
}
|
|
memset(desc2, 0, sizeof(*desc2));
|
|
} else {
|
|
desc = card->txbd_ring[i];
|
|
if (card->tx_buf_list[i]) {
|
|
skb = card->tx_buf_list[i];
|
|
mwifiex_unmap_pci_memory(adapter, skb,
|
|
DMA_TO_DEVICE);
|
|
dev_kfree_skb_any(skb);
|
|
}
|
|
memset(desc, 0, sizeof(*desc));
|
|
}
|
|
card->tx_buf_list[i] = NULL;
|
|
}
|
|
|
|
atomic_set(&adapter->tx_hw_pending, 0);
|
|
return;
|
|
}
|
|
|
|
/* This function cleans up RX buffer rings. If any of the buffer list has valid
|
|
* SKB address, associated SKB is freed.
|
|
*/
|
|
static void mwifiex_cleanup_rxq_ring(struct mwifiex_adapter *adapter)
|
|
{
|
|
struct pcie_service_card *card = adapter->card;
|
|
const struct mwifiex_pcie_card_reg *reg = card->pcie.reg;
|
|
struct mwifiex_pcie_buf_desc *desc;
|
|
struct mwifiex_pfu_buf_desc *desc2;
|
|
struct sk_buff *skb;
|
|
int i;
|
|
|
|
for (i = 0; i < MWIFIEX_MAX_TXRX_BD; i++) {
|
|
if (reg->pfu_enabled) {
|
|
desc2 = card->rxbd_ring[i];
|
|
if (card->rx_buf_list[i]) {
|
|
skb = card->rx_buf_list[i];
|
|
mwifiex_unmap_pci_memory(adapter, skb,
|
|
DMA_FROM_DEVICE);
|
|
dev_kfree_skb_any(skb);
|
|
}
|
|
memset(desc2, 0, sizeof(*desc2));
|
|
} else {
|
|
desc = card->rxbd_ring[i];
|
|
if (card->rx_buf_list[i]) {
|
|
skb = card->rx_buf_list[i];
|
|
mwifiex_unmap_pci_memory(adapter, skb,
|
|
DMA_FROM_DEVICE);
|
|
dev_kfree_skb_any(skb);
|
|
}
|
|
memset(desc, 0, sizeof(*desc));
|
|
}
|
|
card->rx_buf_list[i] = NULL;
|
|
}
|
|
|
|
return;
|
|
}
|
|
|
|
/* This function cleans up event buffer rings. If any of the buffer list has
|
|
* valid SKB address, associated SKB is freed.
|
|
*/
|
|
static void mwifiex_cleanup_evt_ring(struct mwifiex_adapter *adapter)
|
|
{
|
|
struct pcie_service_card *card = adapter->card;
|
|
struct mwifiex_evt_buf_desc *desc;
|
|
struct sk_buff *skb;
|
|
int i;
|
|
|
|
for (i = 0; i < MWIFIEX_MAX_EVT_BD; i++) {
|
|
desc = card->evtbd_ring[i];
|
|
if (card->evt_buf_list[i]) {
|
|
skb = card->evt_buf_list[i];
|
|
mwifiex_unmap_pci_memory(adapter, skb,
|
|
DMA_FROM_DEVICE);
|
|
dev_kfree_skb_any(skb);
|
|
}
|
|
card->evt_buf_list[i] = NULL;
|
|
memset(desc, 0, sizeof(*desc));
|
|
}
|
|
|
|
return;
|
|
}
|
|
|
|
/* This function creates buffer descriptor ring for TX
|
|
*/
|
|
static int mwifiex_pcie_create_txbd_ring(struct mwifiex_adapter *adapter)
|
|
{
|
|
struct pcie_service_card *card = adapter->card;
|
|
const struct mwifiex_pcie_card_reg *reg = card->pcie.reg;
|
|
|
|
/*
|
|
* driver maintaines the write pointer and firmware maintaines the read
|
|
* pointer. The write pointer starts at 0 (zero) while the read pointer
|
|
* starts at zero with rollover bit set
|
|
*/
|
|
card->txbd_wrptr = 0;
|
|
|
|
if (reg->pfu_enabled)
|
|
card->txbd_rdptr = 0;
|
|
else
|
|
card->txbd_rdptr |= reg->tx_rollover_ind;
|
|
|
|
/* allocate shared memory for the BD ring and divide the same in to
|
|
several descriptors */
|
|
if (reg->pfu_enabled)
|
|
card->txbd_ring_size = sizeof(struct mwifiex_pfu_buf_desc) *
|
|
MWIFIEX_MAX_TXRX_BD;
|
|
else
|
|
card->txbd_ring_size = sizeof(struct mwifiex_pcie_buf_desc) *
|
|
MWIFIEX_MAX_TXRX_BD;
|
|
|
|
mwifiex_dbg(adapter, INFO,
|
|
"info: txbd_ring: Allocating %d bytes\n",
|
|
card->txbd_ring_size);
|
|
card->txbd_ring_vbase = dma_alloc_coherent(&card->dev->dev,
|
|
card->txbd_ring_size,
|
|
&card->txbd_ring_pbase,
|
|
GFP_KERNEL);
|
|
if (!card->txbd_ring_vbase) {
|
|
mwifiex_dbg(adapter, ERROR,
|
|
"allocate coherent memory (%d bytes) failed!\n",
|
|
card->txbd_ring_size);
|
|
return -ENOMEM;
|
|
}
|
|
|
|
mwifiex_dbg(adapter, DATA,
|
|
"info: txbd_ring - base: %p, pbase: %#x:%x, len: %#x\n",
|
|
card->txbd_ring_vbase, (u32)card->txbd_ring_pbase,
|
|
(u32)((u64)card->txbd_ring_pbase >> 32),
|
|
card->txbd_ring_size);
|
|
|
|
return mwifiex_init_txq_ring(adapter);
|
|
}
|
|
|
|
static int mwifiex_pcie_delete_txbd_ring(struct mwifiex_adapter *adapter)
|
|
{
|
|
struct pcie_service_card *card = adapter->card;
|
|
const struct mwifiex_pcie_card_reg *reg = card->pcie.reg;
|
|
|
|
mwifiex_cleanup_txq_ring(adapter);
|
|
|
|
if (card->txbd_ring_vbase)
|
|
dma_free_coherent(&card->dev->dev, card->txbd_ring_size,
|
|
card->txbd_ring_vbase,
|
|
card->txbd_ring_pbase);
|
|
card->txbd_ring_size = 0;
|
|
card->txbd_wrptr = 0;
|
|
card->txbd_rdptr = 0 | reg->tx_rollover_ind;
|
|
card->txbd_ring_vbase = NULL;
|
|
card->txbd_ring_pbase = 0;
|
|
|
|
return 0;
|
|
}
|
|
|
|
/*
|
|
* This function creates buffer descriptor ring for RX
|
|
*/
|
|
static int mwifiex_pcie_create_rxbd_ring(struct mwifiex_adapter *adapter)
|
|
{
|
|
int ret;
|
|
struct pcie_service_card *card = adapter->card;
|
|
const struct mwifiex_pcie_card_reg *reg = card->pcie.reg;
|
|
|
|
/*
|
|
* driver maintaines the read pointer and firmware maintaines the write
|
|
* pointer. The write pointer starts at 0 (zero) while the read pointer
|
|
* starts at zero with rollover bit set
|
|
*/
|
|
card->rxbd_wrptr = 0;
|
|
card->rxbd_rdptr = reg->rx_rollover_ind;
|
|
|
|
if (reg->pfu_enabled)
|
|
card->rxbd_ring_size = sizeof(struct mwifiex_pfu_buf_desc) *
|
|
MWIFIEX_MAX_TXRX_BD;
|
|
else
|
|
card->rxbd_ring_size = sizeof(struct mwifiex_pcie_buf_desc) *
|
|
MWIFIEX_MAX_TXRX_BD;
|
|
|
|
mwifiex_dbg(adapter, INFO,
|
|
"info: rxbd_ring: Allocating %d bytes\n",
|
|
card->rxbd_ring_size);
|
|
card->rxbd_ring_vbase = dma_alloc_coherent(&card->dev->dev,
|
|
card->rxbd_ring_size,
|
|
&card->rxbd_ring_pbase,
|
|
GFP_KERNEL);
|
|
if (!card->rxbd_ring_vbase) {
|
|
mwifiex_dbg(adapter, ERROR,
|
|
"allocate coherent memory (%d bytes) failed!\n",
|
|
card->rxbd_ring_size);
|
|
return -ENOMEM;
|
|
}
|
|
|
|
mwifiex_dbg(adapter, DATA,
|
|
"info: rxbd_ring - base: %p, pbase: %#x:%x, len: %#x\n",
|
|
card->rxbd_ring_vbase, (u32)card->rxbd_ring_pbase,
|
|
(u32)((u64)card->rxbd_ring_pbase >> 32),
|
|
card->rxbd_ring_size);
|
|
|
|
ret = mwifiex_init_rxq_ring(adapter);
|
|
if (ret)
|
|
mwifiex_pcie_delete_rxbd_ring(adapter);
|
|
return ret;
|
|
}
|
|
|
|
/*
|
|
* This function deletes Buffer descriptor ring for RX
|
|
*/
|
|
static int mwifiex_pcie_delete_rxbd_ring(struct mwifiex_adapter *adapter)
|
|
{
|
|
struct pcie_service_card *card = adapter->card;
|
|
const struct mwifiex_pcie_card_reg *reg = card->pcie.reg;
|
|
|
|
mwifiex_cleanup_rxq_ring(adapter);
|
|
|
|
if (card->rxbd_ring_vbase)
|
|
dma_free_coherent(&card->dev->dev, card->rxbd_ring_size,
|
|
card->rxbd_ring_vbase,
|
|
card->rxbd_ring_pbase);
|
|
card->rxbd_ring_size = 0;
|
|
card->rxbd_wrptr = 0;
|
|
card->rxbd_rdptr = 0 | reg->rx_rollover_ind;
|
|
card->rxbd_ring_vbase = NULL;
|
|
card->rxbd_ring_pbase = 0;
|
|
|
|
return 0;
|
|
}
|
|
|
|
/*
|
|
* This function creates buffer descriptor ring for Events
|
|
*/
|
|
static int mwifiex_pcie_create_evtbd_ring(struct mwifiex_adapter *adapter)
|
|
{
|
|
int ret;
|
|
struct pcie_service_card *card = adapter->card;
|
|
const struct mwifiex_pcie_card_reg *reg = card->pcie.reg;
|
|
|
|
/*
|
|
* driver maintaines the read pointer and firmware maintaines the write
|
|
* pointer. The write pointer starts at 0 (zero) while the read pointer
|
|
* starts at zero with rollover bit set
|
|
*/
|
|
card->evtbd_wrptr = 0;
|
|
card->evtbd_rdptr = reg->evt_rollover_ind;
|
|
|
|
card->evtbd_ring_size = sizeof(struct mwifiex_evt_buf_desc) *
|
|
MWIFIEX_MAX_EVT_BD;
|
|
|
|
mwifiex_dbg(adapter, INFO,
|
|
"info: evtbd_ring: Allocating %d bytes\n",
|
|
card->evtbd_ring_size);
|
|
card->evtbd_ring_vbase = dma_alloc_coherent(&card->dev->dev,
|
|
card->evtbd_ring_size,
|
|
&card->evtbd_ring_pbase,
|
|
GFP_KERNEL);
|
|
if (!card->evtbd_ring_vbase) {
|
|
mwifiex_dbg(adapter, ERROR,
|
|
"allocate coherent memory (%d bytes) failed!\n",
|
|
card->evtbd_ring_size);
|
|
return -ENOMEM;
|
|
}
|
|
|
|
mwifiex_dbg(adapter, EVENT,
|
|
"info: CMDRSP/EVT bd_ring - base: %p pbase: %#x:%x len: %#x\n",
|
|
card->evtbd_ring_vbase, (u32)card->evtbd_ring_pbase,
|
|
(u32)((u64)card->evtbd_ring_pbase >> 32),
|
|
card->evtbd_ring_size);
|
|
|
|
ret = mwifiex_pcie_init_evt_ring(adapter);
|
|
if (ret)
|
|
mwifiex_pcie_delete_evtbd_ring(adapter);
|
|
return ret;
|
|
}
|
|
|
|
/*
|
|
* This function deletes Buffer descriptor ring for Events
|
|
*/
|
|
static int mwifiex_pcie_delete_evtbd_ring(struct mwifiex_adapter *adapter)
|
|
{
|
|
struct pcie_service_card *card = adapter->card;
|
|
const struct mwifiex_pcie_card_reg *reg = card->pcie.reg;
|
|
|
|
mwifiex_cleanup_evt_ring(adapter);
|
|
|
|
if (card->evtbd_ring_vbase)
|
|
dma_free_coherent(&card->dev->dev, card->evtbd_ring_size,
|
|
card->evtbd_ring_vbase,
|
|
card->evtbd_ring_pbase);
|
|
card->evtbd_wrptr = 0;
|
|
card->evtbd_rdptr = 0 | reg->evt_rollover_ind;
|
|
card->evtbd_ring_size = 0;
|
|
card->evtbd_ring_vbase = NULL;
|
|
card->evtbd_ring_pbase = 0;
|
|
|
|
return 0;
|
|
}
|
|
|
|
/*
|
|
* This function allocates a buffer for CMDRSP
|
|
*/
|
|
static int mwifiex_pcie_alloc_cmdrsp_buf(struct mwifiex_adapter *adapter)
|
|
{
|
|
struct pcie_service_card *card = adapter->card;
|
|
struct sk_buff *skb;
|
|
|
|
/* Allocate memory for receiving command response data */
|
|
skb = dev_alloc_skb(MWIFIEX_UPLD_SIZE);
|
|
if (!skb) {
|
|
mwifiex_dbg(adapter, ERROR,
|
|
"Unable to allocate skb for command response data.\n");
|
|
return -ENOMEM;
|
|
}
|
|
skb_put(skb, MWIFIEX_UPLD_SIZE);
|
|
if (mwifiex_map_pci_memory(adapter, skb, MWIFIEX_UPLD_SIZE,
|
|
DMA_FROM_DEVICE)) {
|
|
kfree_skb(skb);
|
|
return -1;
|
|
}
|
|
|
|
card->cmdrsp_buf = skb;
|
|
|
|
return 0;
|
|
}
|
|
|
|
/*
|
|
* This function deletes a buffer for CMDRSP
|
|
*/
|
|
static int mwifiex_pcie_delete_cmdrsp_buf(struct mwifiex_adapter *adapter)
|
|
{
|
|
struct pcie_service_card *card;
|
|
|
|
if (!adapter)
|
|
return 0;
|
|
|
|
card = adapter->card;
|
|
|
|
if (card && card->cmdrsp_buf) {
|
|
mwifiex_unmap_pci_memory(adapter, card->cmdrsp_buf,
|
|
DMA_FROM_DEVICE);
|
|
dev_kfree_skb_any(card->cmdrsp_buf);
|
|
card->cmdrsp_buf = NULL;
|
|
}
|
|
|
|
if (card && card->cmd_buf) {
|
|
mwifiex_unmap_pci_memory(adapter, card->cmd_buf,
|
|
DMA_TO_DEVICE);
|
|
dev_kfree_skb_any(card->cmd_buf);
|
|
card->cmd_buf = NULL;
|
|
}
|
|
return 0;
|
|
}
|
|
|
|
/*
|
|
* This function allocates a buffer for sleep cookie
|
|
*/
|
|
static int mwifiex_pcie_alloc_sleep_cookie_buf(struct mwifiex_adapter *adapter)
|
|
{
|
|
struct pcie_service_card *card = adapter->card;
|
|
u32 *cookie;
|
|
|
|
card->sleep_cookie_vbase = dma_alloc_coherent(&card->dev->dev,
|
|
sizeof(u32),
|
|
&card->sleep_cookie_pbase,
|
|
GFP_KERNEL);
|
|
if (!card->sleep_cookie_vbase) {
|
|
mwifiex_dbg(adapter, ERROR,
|
|
"dma_alloc_coherent failed!\n");
|
|
return -ENOMEM;
|
|
}
|
|
cookie = (u32 *)card->sleep_cookie_vbase;
|
|
/* Init val of Sleep Cookie */
|
|
*cookie = FW_AWAKE_COOKIE;
|
|
|
|
mwifiex_dbg(adapter, INFO, "alloc_scook: sleep cookie=0x%x\n", *cookie);
|
|
|
|
return 0;
|
|
}
|
|
|
|
/*
|
|
* This function deletes buffer for sleep cookie
|
|
*/
|
|
static int mwifiex_pcie_delete_sleep_cookie_buf(struct mwifiex_adapter *adapter)
|
|
{
|
|
struct pcie_service_card *card;
|
|
|
|
if (!adapter)
|
|
return 0;
|
|
|
|
card = adapter->card;
|
|
|
|
if (card && card->sleep_cookie_vbase) {
|
|
dma_free_coherent(&card->dev->dev, sizeof(u32),
|
|
card->sleep_cookie_vbase,
|
|
card->sleep_cookie_pbase);
|
|
card->sleep_cookie_vbase = NULL;
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
/* This function flushes the TX buffer descriptor ring
|
|
* This function defined as handler is also called while cleaning TXRX
|
|
* during disconnect/ bss stop.
|
|
*/
|
|
static int mwifiex_clean_pcie_ring_buf(struct mwifiex_adapter *adapter)
|
|
{
|
|
struct pcie_service_card *card = adapter->card;
|
|
|
|
if (!mwifiex_pcie_txbd_empty(card, card->txbd_rdptr)) {
|
|
card->txbd_flush = 1;
|
|
/* write pointer already set at last send
|
|
* send dnld-rdy intr again, wait for completion.
|
|
*/
|
|
if (mwifiex_write_reg(adapter, PCIE_CPU_INT_EVENT,
|
|
CPU_INTR_DNLD_RDY)) {
|
|
mwifiex_dbg(adapter, ERROR,
|
|
"failed to assert dnld-rdy interrupt.\n");
|
|
return -1;
|
|
}
|
|
}
|
|
return 0;
|
|
}
|
|
|
|
/*
|
|
* This function unmaps and frees downloaded data buffer
|
|
*/
|
|
static int mwifiex_pcie_send_data_complete(struct mwifiex_adapter *adapter)
|
|
{
|
|
struct sk_buff *skb;
|
|
u32 wrdoneidx, rdptr, num_tx_buffs, unmap_count = 0;
|
|
struct mwifiex_pcie_buf_desc *desc;
|
|
struct mwifiex_pfu_buf_desc *desc2;
|
|
struct pcie_service_card *card = adapter->card;
|
|
const struct mwifiex_pcie_card_reg *reg = card->pcie.reg;
|
|
|
|
if (!mwifiex_pcie_ok_to_access_hw(adapter))
|
|
mwifiex_pm_wakeup_card(adapter);
|
|
|
|
/* Read the TX ring read pointer set by firmware */
|
|
if (mwifiex_read_reg(adapter, reg->tx_rdptr, &rdptr)) {
|
|
mwifiex_dbg(adapter, ERROR,
|
|
"SEND COMP: failed to read reg->tx_rdptr\n");
|
|
return -1;
|
|
}
|
|
|
|
mwifiex_dbg(adapter, DATA,
|
|
"SEND COMP: rdptr_prev=0x%x, rdptr=0x%x\n",
|
|
card->txbd_rdptr, rdptr);
|
|
|
|
num_tx_buffs = MWIFIEX_MAX_TXRX_BD << reg->tx_start_ptr;
|
|
/* free from previous txbd_rdptr to current txbd_rdptr */
|
|
while (((card->txbd_rdptr & reg->tx_mask) !=
|
|
(rdptr & reg->tx_mask)) ||
|
|
((card->txbd_rdptr & reg->tx_rollover_ind) !=
|
|
(rdptr & reg->tx_rollover_ind))) {
|
|
wrdoneidx = (card->txbd_rdptr & reg->tx_mask) >>
|
|
reg->tx_start_ptr;
|
|
|
|
skb = card->tx_buf_list[wrdoneidx];
|
|
|
|
if (skb) {
|
|
mwifiex_dbg(adapter, DATA,
|
|
"SEND COMP: Detach skb %p at txbd_rdidx=%d\n",
|
|
skb, wrdoneidx);
|
|
mwifiex_unmap_pci_memory(adapter, skb,
|
|
DMA_TO_DEVICE);
|
|
|
|
unmap_count++;
|
|
|
|
if (card->txbd_flush)
|
|
mwifiex_write_data_complete(adapter, skb, 0,
|
|
-1);
|
|
else
|
|
mwifiex_write_data_complete(adapter, skb, 0, 0);
|
|
atomic_dec(&adapter->tx_hw_pending);
|
|
}
|
|
|
|
card->tx_buf_list[wrdoneidx] = NULL;
|
|
|
|
if (reg->pfu_enabled) {
|
|
desc2 = card->txbd_ring[wrdoneidx];
|
|
memset(desc2, 0, sizeof(*desc2));
|
|
} else {
|
|
desc = card->txbd_ring[wrdoneidx];
|
|
memset(desc, 0, sizeof(*desc));
|
|
}
|
|
switch (card->dev->device) {
|
|
case PCIE_DEVICE_ID_MARVELL_88W8766P:
|
|
card->txbd_rdptr++;
|
|
break;
|
|
case PCIE_DEVICE_ID_MARVELL_88W8897:
|
|
case PCIE_DEVICE_ID_MARVELL_88W8997:
|
|
card->txbd_rdptr += reg->ring_tx_start_ptr;
|
|
break;
|
|
}
|
|
|
|
|
|
if ((card->txbd_rdptr & reg->tx_mask) == num_tx_buffs)
|
|
card->txbd_rdptr = ((card->txbd_rdptr &
|
|
reg->tx_rollover_ind) ^
|
|
reg->tx_rollover_ind);
|
|
}
|
|
|
|
if (unmap_count)
|
|
adapter->data_sent = false;
|
|
|
|
if (card->txbd_flush) {
|
|
if (mwifiex_pcie_txbd_empty(card, card->txbd_rdptr))
|
|
card->txbd_flush = 0;
|
|
else
|
|
mwifiex_clean_pcie_ring_buf(adapter);
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
/* This function sends data buffer to device. First 4 bytes of payload
|
|
* are filled with payload length and payload type. Then this payload
|
|
* is mapped to PCI device memory. Tx ring pointers are advanced accordingly.
|
|
* Download ready interrupt to FW is deffered if Tx ring is not full and
|
|
* additional payload can be accomodated.
|
|
* Caller must ensure tx_param parameter to this function is not NULL.
|
|
*/
|
|
static int
|
|
mwifiex_pcie_send_data(struct mwifiex_adapter *adapter, struct sk_buff *skb,
|
|
struct mwifiex_tx_param *tx_param)
|
|
{
|
|
struct pcie_service_card *card = adapter->card;
|
|
const struct mwifiex_pcie_card_reg *reg = card->pcie.reg;
|
|
u32 wrindx, num_tx_buffs, rx_val;
|
|
int ret;
|
|
dma_addr_t buf_pa;
|
|
struct mwifiex_pcie_buf_desc *desc = NULL;
|
|
struct mwifiex_pfu_buf_desc *desc2 = NULL;
|
|
|
|
if (!(skb->data && skb->len)) {
|
|
mwifiex_dbg(adapter, ERROR,
|
|
"%s(): invalid parameter <%p, %#x>\n",
|
|
__func__, skb->data, skb->len);
|
|
return -1;
|
|
}
|
|
|
|
if (!mwifiex_pcie_ok_to_access_hw(adapter))
|
|
mwifiex_pm_wakeup_card(adapter);
|
|
|
|
num_tx_buffs = MWIFIEX_MAX_TXRX_BD << reg->tx_start_ptr;
|
|
mwifiex_dbg(adapter, DATA,
|
|
"info: SEND DATA: <Rd: %#x, Wr: %#x>\n",
|
|
card->txbd_rdptr, card->txbd_wrptr);
|
|
if (mwifiex_pcie_txbd_not_full(card)) {
|
|
u8 *payload;
|
|
|
|
adapter->data_sent = true;
|
|
payload = skb->data;
|
|
put_unaligned_le16((u16)skb->len, payload + 0);
|
|
put_unaligned_le16(MWIFIEX_TYPE_DATA, payload + 2);
|
|
|
|
if (mwifiex_map_pci_memory(adapter, skb, skb->len,
|
|
DMA_TO_DEVICE))
|
|
return -1;
|
|
|
|
wrindx = (card->txbd_wrptr & reg->tx_mask) >> reg->tx_start_ptr;
|
|
buf_pa = MWIFIEX_SKB_DMA_ADDR(skb);
|
|
card->tx_buf_list[wrindx] = skb;
|
|
atomic_inc(&adapter->tx_hw_pending);
|
|
|
|
if (reg->pfu_enabled) {
|
|
desc2 = card->txbd_ring[wrindx];
|
|
desc2->paddr = buf_pa;
|
|
desc2->len = (u16)skb->len;
|
|
desc2->frag_len = (u16)skb->len;
|
|
desc2->offset = 0;
|
|
desc2->flags = MWIFIEX_BD_FLAG_FIRST_DESC |
|
|
MWIFIEX_BD_FLAG_LAST_DESC;
|
|
} else {
|
|
desc = card->txbd_ring[wrindx];
|
|
desc->paddr = buf_pa;
|
|
desc->len = (u16)skb->len;
|
|
desc->flags = MWIFIEX_BD_FLAG_FIRST_DESC |
|
|
MWIFIEX_BD_FLAG_LAST_DESC;
|
|
}
|
|
|
|
switch (card->dev->device) {
|
|
case PCIE_DEVICE_ID_MARVELL_88W8766P:
|
|
card->txbd_wrptr++;
|
|
break;
|
|
case PCIE_DEVICE_ID_MARVELL_88W8897:
|
|
case PCIE_DEVICE_ID_MARVELL_88W8997:
|
|
card->txbd_wrptr += reg->ring_tx_start_ptr;
|
|
break;
|
|
}
|
|
|
|
if ((card->txbd_wrptr & reg->tx_mask) == num_tx_buffs)
|
|
card->txbd_wrptr = ((card->txbd_wrptr &
|
|
reg->tx_rollover_ind) ^
|
|
reg->tx_rollover_ind);
|
|
|
|
rx_val = card->rxbd_rdptr & reg->rx_wrap_mask;
|
|
/* Write the TX ring write pointer in to reg->tx_wrptr */
|
|
if (mwifiex_write_reg(adapter, reg->tx_wrptr,
|
|
card->txbd_wrptr | rx_val)) {
|
|
mwifiex_dbg(adapter, ERROR,
|
|
"SEND DATA: failed to write reg->tx_wrptr\n");
|
|
ret = -1;
|
|
goto done_unmap;
|
|
}
|
|
|
|
/* The firmware (latest version 15.68.19.p21) of the 88W8897 PCIe+USB card
|
|
* seems to crash randomly after setting the TX ring write pointer when
|
|
* ASPM powersaving is enabled. A workaround seems to be keeping the bus
|
|
* busy by reading a random register afterwards.
|
|
*/
|
|
mwifiex_read_reg(adapter, PCI_VENDOR_ID, &rx_val);
|
|
|
|
if ((mwifiex_pcie_txbd_not_full(card)) &&
|
|
tx_param->next_pkt_len) {
|
|
/* have more packets and TxBD still can hold more */
|
|
mwifiex_dbg(adapter, DATA,
|
|
"SEND DATA: delay dnld-rdy interrupt.\n");
|
|
adapter->data_sent = false;
|
|
} else {
|
|
/* Send the TX ready interrupt */
|
|
if (mwifiex_write_reg(adapter, PCIE_CPU_INT_EVENT,
|
|
CPU_INTR_DNLD_RDY)) {
|
|
mwifiex_dbg(adapter, ERROR,
|
|
"SEND DATA: failed to assert dnld-rdy interrupt.\n");
|
|
ret = -1;
|
|
goto done_unmap;
|
|
}
|
|
}
|
|
mwifiex_dbg(adapter, DATA,
|
|
"info: SEND DATA: Updated <Rd: %#x, Wr:\t"
|
|
"%#x> and sent packet to firmware successfully\n",
|
|
card->txbd_rdptr, card->txbd_wrptr);
|
|
} else {
|
|
mwifiex_dbg(adapter, DATA,
|
|
"info: TX Ring full, can't send packets to fw\n");
|
|
adapter->data_sent = true;
|
|
/* Send the TX ready interrupt */
|
|
if (mwifiex_write_reg(adapter, PCIE_CPU_INT_EVENT,
|
|
CPU_INTR_DNLD_RDY))
|
|
mwifiex_dbg(adapter, ERROR,
|
|
"SEND DATA: failed to assert door-bell intr\n");
|
|
return -EBUSY;
|
|
}
|
|
|
|
return -EINPROGRESS;
|
|
done_unmap:
|
|
mwifiex_unmap_pci_memory(adapter, skb, DMA_TO_DEVICE);
|
|
card->tx_buf_list[wrindx] = NULL;
|
|
atomic_dec(&adapter->tx_hw_pending);
|
|
if (reg->pfu_enabled)
|
|
memset(desc2, 0, sizeof(*desc2));
|
|
else
|
|
memset(desc, 0, sizeof(*desc));
|
|
|
|
return ret;
|
|
}
|
|
|
|
/*
|
|
* This function handles received buffer ring and
|
|
* dispatches packets to upper
|
|
*/
|
|
static int mwifiex_pcie_process_recv_data(struct mwifiex_adapter *adapter)
|
|
{
|
|
struct pcie_service_card *card = adapter->card;
|
|
const struct mwifiex_pcie_card_reg *reg = card->pcie.reg;
|
|
u32 wrptr, rd_index, tx_val;
|
|
dma_addr_t buf_pa;
|
|
int ret = 0;
|
|
struct sk_buff *skb_tmp = NULL;
|
|
struct mwifiex_pcie_buf_desc *desc;
|
|
struct mwifiex_pfu_buf_desc *desc2;
|
|
|
|
if (!mwifiex_pcie_ok_to_access_hw(adapter))
|
|
mwifiex_pm_wakeup_card(adapter);
|
|
|
|
/* Read the RX ring Write pointer set by firmware */
|
|
if (mwifiex_read_reg(adapter, reg->rx_wrptr, &wrptr)) {
|
|
mwifiex_dbg(adapter, ERROR,
|
|
"RECV DATA: failed to read reg->rx_wrptr\n");
|
|
ret = -1;
|
|
goto done;
|
|
}
|
|
card->rxbd_wrptr = wrptr;
|
|
|
|
while (((wrptr & reg->rx_mask) !=
|
|
(card->rxbd_rdptr & reg->rx_mask)) ||
|
|
((wrptr & reg->rx_rollover_ind) ==
|
|
(card->rxbd_rdptr & reg->rx_rollover_ind))) {
|
|
struct sk_buff *skb_data;
|
|
u16 rx_len;
|
|
|
|
rd_index = card->rxbd_rdptr & reg->rx_mask;
|
|
skb_data = card->rx_buf_list[rd_index];
|
|
|
|
/* If skb allocation was failed earlier for Rx packet,
|
|
* rx_buf_list[rd_index] would have been left with a NULL.
|
|
*/
|
|
if (!skb_data)
|
|
return -ENOMEM;
|
|
|
|
mwifiex_unmap_pci_memory(adapter, skb_data, DMA_FROM_DEVICE);
|
|
card->rx_buf_list[rd_index] = NULL;
|
|
|
|
/* Get data length from interface header -
|
|
* first 2 bytes for len, next 2 bytes is for type
|
|
*/
|
|
rx_len = get_unaligned_le16(skb_data->data);
|
|
if (WARN_ON(rx_len <= adapter->intf_hdr_len ||
|
|
rx_len > MWIFIEX_RX_DATA_BUF_SIZE)) {
|
|
mwifiex_dbg(adapter, ERROR,
|
|
"Invalid RX len %d, Rd=%#x, Wr=%#x\n",
|
|
rx_len, card->rxbd_rdptr, wrptr);
|
|
dev_kfree_skb_any(skb_data);
|
|
} else {
|
|
skb_put(skb_data, rx_len);
|
|
mwifiex_dbg(adapter, DATA,
|
|
"info: RECV DATA: Rd=%#x, Wr=%#x, Len=%d\n",
|
|
card->rxbd_rdptr, wrptr, rx_len);
|
|
skb_pull(skb_data, adapter->intf_hdr_len);
|
|
if (adapter->rx_work_enabled) {
|
|
skb_queue_tail(&adapter->rx_data_q, skb_data);
|
|
adapter->data_received = true;
|
|
atomic_inc(&adapter->rx_pending);
|
|
} else {
|
|
mwifiex_handle_rx_packet(adapter, skb_data);
|
|
}
|
|
}
|
|
|
|
skb_tmp = mwifiex_alloc_dma_align_buf(MWIFIEX_RX_DATA_BUF_SIZE,
|
|
GFP_KERNEL);
|
|
if (!skb_tmp) {
|
|
mwifiex_dbg(adapter, ERROR,
|
|
"Unable to allocate skb.\n");
|
|
return -ENOMEM;
|
|
}
|
|
|
|
if (mwifiex_map_pci_memory(adapter, skb_tmp,
|
|
MWIFIEX_RX_DATA_BUF_SIZE,
|
|
DMA_FROM_DEVICE))
|
|
return -1;
|
|
|
|
buf_pa = MWIFIEX_SKB_DMA_ADDR(skb_tmp);
|
|
|
|
mwifiex_dbg(adapter, INFO,
|
|
"RECV DATA: Attach new sk_buff %p at rxbd_rdidx=%d\n",
|
|
skb_tmp, rd_index);
|
|
card->rx_buf_list[rd_index] = skb_tmp;
|
|
|
|
if (reg->pfu_enabled) {
|
|
desc2 = card->rxbd_ring[rd_index];
|
|
desc2->paddr = buf_pa;
|
|
desc2->len = skb_tmp->len;
|
|
desc2->frag_len = skb_tmp->len;
|
|
desc2->offset = 0;
|
|
desc2->flags = reg->ring_flag_sop | reg->ring_flag_eop;
|
|
} else {
|
|
desc = card->rxbd_ring[rd_index];
|
|
desc->paddr = buf_pa;
|
|
desc->len = skb_tmp->len;
|
|
desc->flags = 0;
|
|
}
|
|
|
|
if ((++card->rxbd_rdptr & reg->rx_mask) ==
|
|
MWIFIEX_MAX_TXRX_BD) {
|
|
card->rxbd_rdptr = ((card->rxbd_rdptr &
|
|
reg->rx_rollover_ind) ^
|
|
reg->rx_rollover_ind);
|
|
}
|
|
mwifiex_dbg(adapter, DATA,
|
|
"info: RECV DATA: <Rd: %#x, Wr: %#x>\n",
|
|
card->rxbd_rdptr, wrptr);
|
|
|
|
tx_val = card->txbd_wrptr & reg->tx_wrap_mask;
|
|
/* Write the RX ring read pointer in to reg->rx_rdptr */
|
|
if (mwifiex_write_reg(adapter, reg->rx_rdptr,
|
|
card->rxbd_rdptr | tx_val)) {
|
|
mwifiex_dbg(adapter, DATA,
|
|
"RECV DATA: failed to write reg->rx_rdptr\n");
|
|
ret = -1;
|
|
goto done;
|
|
}
|
|
|
|
/* Read the RX ring Write pointer set by firmware */
|
|
if (mwifiex_read_reg(adapter, reg->rx_wrptr, &wrptr)) {
|
|
mwifiex_dbg(adapter, ERROR,
|
|
"RECV DATA: failed to read reg->rx_wrptr\n");
|
|
ret = -1;
|
|
goto done;
|
|
}
|
|
mwifiex_dbg(adapter, DATA,
|
|
"info: RECV DATA: Rcvd packet from fw successfully\n");
|
|
card->rxbd_wrptr = wrptr;
|
|
}
|
|
|
|
done:
|
|
return ret;
|
|
}
|
|
|
|
/*
|
|
* This function downloads the boot command to device
|
|
*/
|
|
static int
|
|
mwifiex_pcie_send_boot_cmd(struct mwifiex_adapter *adapter, struct sk_buff *skb)
|
|
{
|
|
dma_addr_t buf_pa;
|
|
struct pcie_service_card *card = adapter->card;
|
|
const struct mwifiex_pcie_card_reg *reg = card->pcie.reg;
|
|
|
|
if (!(skb->data && skb->len)) {
|
|
mwifiex_dbg(adapter, ERROR,
|
|
"Invalid parameter in %s <%p. len %d>\n",
|
|
__func__, skb->data, skb->len);
|
|
return -1;
|
|
}
|
|
|
|
if (mwifiex_map_pci_memory(adapter, skb, skb->len, DMA_TO_DEVICE))
|
|
return -1;
|
|
|
|
buf_pa = MWIFIEX_SKB_DMA_ADDR(skb);
|
|
|
|
/* Write the lower 32bits of the physical address to low command
|
|
* address scratch register
|
|
*/
|
|
if (mwifiex_write_reg(adapter, reg->cmd_addr_lo, (u32)buf_pa)) {
|
|
mwifiex_dbg(adapter, ERROR,
|
|
"%s: failed to write download command to boot code.\n",
|
|
__func__);
|
|
mwifiex_unmap_pci_memory(adapter, skb, DMA_TO_DEVICE);
|
|
return -1;
|
|
}
|
|
|
|
/* Write the upper 32bits of the physical address to high command
|
|
* address scratch register
|
|
*/
|
|
if (mwifiex_write_reg(adapter, reg->cmd_addr_hi,
|
|
(u32)((u64)buf_pa >> 32))) {
|
|
mwifiex_dbg(adapter, ERROR,
|
|
"%s: failed to write download command to boot code.\n",
|
|
__func__);
|
|
mwifiex_unmap_pci_memory(adapter, skb, DMA_TO_DEVICE);
|
|
return -1;
|
|
}
|
|
|
|
/* Write the command length to cmd_size scratch register */
|
|
if (mwifiex_write_reg(adapter, reg->cmd_size, skb->len)) {
|
|
mwifiex_dbg(adapter, ERROR,
|
|
"%s: failed to write command len to cmd_size scratch reg\n",
|
|
__func__);
|
|
mwifiex_unmap_pci_memory(adapter, skb, DMA_TO_DEVICE);
|
|
return -1;
|
|
}
|
|
|
|
/* Ring the door bell */
|
|
if (mwifiex_write_reg(adapter, PCIE_CPU_INT_EVENT,
|
|
CPU_INTR_DOOR_BELL)) {
|
|
mwifiex_dbg(adapter, ERROR,
|
|
"%s: failed to assert door-bell intr\n", __func__);
|
|
mwifiex_unmap_pci_memory(adapter, skb, DMA_TO_DEVICE);
|
|
return -1;
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
/* This function init rx port in firmware which in turn enables to receive data
|
|
* from device before transmitting any packet.
|
|
*/
|
|
static int mwifiex_pcie_init_fw_port(struct mwifiex_adapter *adapter)
|
|
{
|
|
struct pcie_service_card *card = adapter->card;
|
|
const struct mwifiex_pcie_card_reg *reg = card->pcie.reg;
|
|
int tx_wrap = card->txbd_wrptr & reg->tx_wrap_mask;
|
|
|
|
/* Write the RX ring read pointer in to reg->rx_rdptr */
|
|
if (mwifiex_write_reg(adapter, reg->rx_rdptr, card->rxbd_rdptr |
|
|
tx_wrap)) {
|
|
mwifiex_dbg(adapter, ERROR,
|
|
"RECV DATA: failed to write reg->rx_rdptr\n");
|
|
return -1;
|
|
}
|
|
return 0;
|
|
}
|
|
|
|
/* This function downloads commands to the device
|
|
*/
|
|
static int
|
|
mwifiex_pcie_send_cmd(struct mwifiex_adapter *adapter, struct sk_buff *skb)
|
|
{
|
|
struct pcie_service_card *card = adapter->card;
|
|
const struct mwifiex_pcie_card_reg *reg = card->pcie.reg;
|
|
int ret = 0;
|
|
dma_addr_t cmd_buf_pa, cmdrsp_buf_pa;
|
|
u8 *payload = (u8 *)skb->data;
|
|
|
|
if (!(skb->data && skb->len)) {
|
|
mwifiex_dbg(adapter, ERROR,
|
|
"Invalid parameter in %s <%p, %#x>\n",
|
|
__func__, skb->data, skb->len);
|
|
return -1;
|
|
}
|
|
|
|
/* Make sure a command response buffer is available */
|
|
if (!card->cmdrsp_buf) {
|
|
mwifiex_dbg(adapter, ERROR,
|
|
"No response buffer available, send command failed\n");
|
|
return -EBUSY;
|
|
}
|
|
|
|
if (!mwifiex_pcie_ok_to_access_hw(adapter))
|
|
mwifiex_pm_wakeup_card(adapter);
|
|
|
|
adapter->cmd_sent = true;
|
|
|
|
put_unaligned_le16((u16)skb->len, &payload[0]);
|
|
put_unaligned_le16(MWIFIEX_TYPE_CMD, &payload[2]);
|
|
|
|
if (mwifiex_map_pci_memory(adapter, skb, skb->len, DMA_TO_DEVICE))
|
|
return -1;
|
|
|
|
card->cmd_buf = skb;
|
|
/*
|
|
* Need to keep a reference, since core driver might free up this
|
|
* buffer before we've unmapped it.
|
|
*/
|
|
skb_get(skb);
|
|
|
|
/* To send a command, the driver will:
|
|
1. Write the 64bit physical address of the data buffer to
|
|
cmd response address low + cmd response address high
|
|
2. Ring the door bell (i.e. set the door bell interrupt)
|
|
|
|
In response to door bell interrupt, the firmware will perform
|
|
the DMA of the command packet (first header to obtain the total
|
|
length and then rest of the command).
|
|
*/
|
|
|
|
if (card->cmdrsp_buf) {
|
|
cmdrsp_buf_pa = MWIFIEX_SKB_DMA_ADDR(card->cmdrsp_buf);
|
|
/* Write the lower 32bits of the cmdrsp buffer physical
|
|
address */
|
|
if (mwifiex_write_reg(adapter, reg->cmdrsp_addr_lo,
|
|
(u32)cmdrsp_buf_pa)) {
|
|
mwifiex_dbg(adapter, ERROR,
|
|
"Failed to write download cmd to boot code.\n");
|
|
ret = -1;
|
|
goto done;
|
|
}
|
|
/* Write the upper 32bits of the cmdrsp buffer physical
|
|
address */
|
|
if (mwifiex_write_reg(adapter, reg->cmdrsp_addr_hi,
|
|
(u32)((u64)cmdrsp_buf_pa >> 32))) {
|
|
mwifiex_dbg(adapter, ERROR,
|
|
"Failed to write download cmd to boot code.\n");
|
|
ret = -1;
|
|
goto done;
|
|
}
|
|
}
|
|
|
|
cmd_buf_pa = MWIFIEX_SKB_DMA_ADDR(card->cmd_buf);
|
|
/* Write the lower 32bits of the physical address to reg->cmd_addr_lo */
|
|
if (mwifiex_write_reg(adapter, reg->cmd_addr_lo,
|
|
(u32)cmd_buf_pa)) {
|
|
mwifiex_dbg(adapter, ERROR,
|
|
"Failed to write download cmd to boot code.\n");
|
|
ret = -1;
|
|
goto done;
|
|
}
|
|
/* Write the upper 32bits of the physical address to reg->cmd_addr_hi */
|
|
if (mwifiex_write_reg(adapter, reg->cmd_addr_hi,
|
|
(u32)((u64)cmd_buf_pa >> 32))) {
|
|
mwifiex_dbg(adapter, ERROR,
|
|
"Failed to write download cmd to boot code.\n");
|
|
ret = -1;
|
|
goto done;
|
|
}
|
|
|
|
/* Write the command length to reg->cmd_size */
|
|
if (mwifiex_write_reg(adapter, reg->cmd_size,
|
|
card->cmd_buf->len)) {
|
|
mwifiex_dbg(adapter, ERROR,
|
|
"Failed to write cmd len to reg->cmd_size\n");
|
|
ret = -1;
|
|
goto done;
|
|
}
|
|
|
|
/* Ring the door bell */
|
|
if (mwifiex_write_reg(adapter, PCIE_CPU_INT_EVENT,
|
|
CPU_INTR_DOOR_BELL)) {
|
|
mwifiex_dbg(adapter, ERROR,
|
|
"Failed to assert door-bell intr\n");
|
|
ret = -1;
|
|
goto done;
|
|
}
|
|
|
|
done:
|
|
if (ret)
|
|
adapter->cmd_sent = false;
|
|
|
|
return 0;
|
|
}
|
|
|
|
/*
|
|
* This function handles command complete interrupt
|
|
*/
|
|
static int mwifiex_pcie_process_cmd_complete(struct mwifiex_adapter *adapter)
|
|
{
|
|
struct pcie_service_card *card = adapter->card;
|
|
const struct mwifiex_pcie_card_reg *reg = card->pcie.reg;
|
|
struct sk_buff *skb = card->cmdrsp_buf;
|
|
int count = 0;
|
|
u16 rx_len;
|
|
|
|
mwifiex_dbg(adapter, CMD,
|
|
"info: Rx CMD Response\n");
|
|
|
|
if (adapter->curr_cmd)
|
|
mwifiex_unmap_pci_memory(adapter, skb, DMA_FROM_DEVICE);
|
|
else
|
|
dma_sync_single_for_cpu(&card->dev->dev,
|
|
MWIFIEX_SKB_DMA_ADDR(skb),
|
|
MWIFIEX_UPLD_SIZE, DMA_FROM_DEVICE);
|
|
|
|
/* Unmap the command as a response has been received. */
|
|
if (card->cmd_buf) {
|
|
mwifiex_unmap_pci_memory(adapter, card->cmd_buf,
|
|
DMA_TO_DEVICE);
|
|
dev_kfree_skb_any(card->cmd_buf);
|
|
card->cmd_buf = NULL;
|
|
}
|
|
|
|
rx_len = get_unaligned_le16(skb->data);
|
|
skb_put(skb, MWIFIEX_UPLD_SIZE - skb->len);
|
|
skb_trim(skb, rx_len);
|
|
|
|
if (!adapter->curr_cmd) {
|
|
if (adapter->ps_state == PS_STATE_SLEEP_CFM) {
|
|
dma_sync_single_for_device(&card->dev->dev,
|
|
MWIFIEX_SKB_DMA_ADDR(skb),
|
|
MWIFIEX_SLEEP_COOKIE_SIZE,
|
|
DMA_FROM_DEVICE);
|
|
if (mwifiex_write_reg(adapter,
|
|
PCIE_CPU_INT_EVENT,
|
|
CPU_INTR_SLEEP_CFM_DONE)) {
|
|
mwifiex_dbg(adapter, ERROR,
|
|
"Write register failed\n");
|
|
return -1;
|
|
}
|
|
mwifiex_delay_for_sleep_cookie(adapter,
|
|
MWIFIEX_MAX_DELAY_COUNT);
|
|
mwifiex_unmap_pci_memory(adapter, skb,
|
|
DMA_FROM_DEVICE);
|
|
skb_pull(skb, adapter->intf_hdr_len);
|
|
while (reg->sleep_cookie && (count++ < 10) &&
|
|
mwifiex_pcie_ok_to_access_hw(adapter))
|
|
usleep_range(50, 60);
|
|
mwifiex_pcie_enable_host_int(adapter);
|
|
mwifiex_process_sleep_confirm_resp(adapter, skb->data,
|
|
skb->len);
|
|
} else {
|
|
mwifiex_dbg(adapter, ERROR,
|
|
"There is no command but got cmdrsp\n");
|
|
}
|
|
memcpy(adapter->upld_buf, skb->data,
|
|
min_t(u32, MWIFIEX_SIZE_OF_CMD_BUFFER, skb->len));
|
|
skb_push(skb, adapter->intf_hdr_len);
|
|
if (mwifiex_map_pci_memory(adapter, skb, MWIFIEX_UPLD_SIZE,
|
|
DMA_FROM_DEVICE))
|
|
return -1;
|
|
} else if (mwifiex_pcie_ok_to_access_hw(adapter)) {
|
|
skb_pull(skb, adapter->intf_hdr_len);
|
|
adapter->curr_cmd->resp_skb = skb;
|
|
adapter->cmd_resp_received = true;
|
|
/* Take the pointer and set it to CMD node and will
|
|
return in the response complete callback */
|
|
card->cmdrsp_buf = NULL;
|
|
|
|
/* Clear the cmd-rsp buffer address in scratch registers. This
|
|
will prevent firmware from writing to the same response
|
|
buffer again. */
|
|
if (mwifiex_write_reg(adapter, reg->cmdrsp_addr_lo, 0)) {
|
|
mwifiex_dbg(adapter, ERROR,
|
|
"cmd_done: failed to clear cmd_rsp_addr_lo\n");
|
|
return -1;
|
|
}
|
|
/* Write the upper 32bits of the cmdrsp buffer physical
|
|
address */
|
|
if (mwifiex_write_reg(adapter, reg->cmdrsp_addr_hi, 0)) {
|
|
mwifiex_dbg(adapter, ERROR,
|
|
"cmd_done: failed to clear cmd_rsp_addr_hi\n");
|
|
return -1;
|
|
}
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
/*
|
|
* Command Response processing complete handler
|
|
*/
|
|
static int mwifiex_pcie_cmdrsp_complete(struct mwifiex_adapter *adapter,
|
|
struct sk_buff *skb)
|
|
{
|
|
struct pcie_service_card *card = adapter->card;
|
|
|
|
if (skb) {
|
|
card->cmdrsp_buf = skb;
|
|
skb_push(card->cmdrsp_buf, adapter->intf_hdr_len);
|
|
if (mwifiex_map_pci_memory(adapter, skb, MWIFIEX_UPLD_SIZE,
|
|
DMA_FROM_DEVICE))
|
|
return -1;
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
/*
|
|
* This function handles firmware event ready interrupt
|
|
*/
|
|
static int mwifiex_pcie_process_event_ready(struct mwifiex_adapter *adapter)
|
|
{
|
|
struct pcie_service_card *card = adapter->card;
|
|
const struct mwifiex_pcie_card_reg *reg = card->pcie.reg;
|
|
u32 rdptr = card->evtbd_rdptr & MWIFIEX_EVTBD_MASK;
|
|
u32 wrptr, event;
|
|
struct mwifiex_evt_buf_desc *desc;
|
|
|
|
if (!mwifiex_pcie_ok_to_access_hw(adapter))
|
|
mwifiex_pm_wakeup_card(adapter);
|
|
|
|
if (adapter->event_received) {
|
|
mwifiex_dbg(adapter, EVENT,
|
|
"info: Event being processed,\t"
|
|
"do not process this interrupt just yet\n");
|
|
return 0;
|
|
}
|
|
|
|
if (rdptr >= MWIFIEX_MAX_EVT_BD) {
|
|
mwifiex_dbg(adapter, ERROR,
|
|
"info: Invalid read pointer...\n");
|
|
return -1;
|
|
}
|
|
|
|
/* Read the event ring write pointer set by firmware */
|
|
if (mwifiex_read_reg(adapter, reg->evt_wrptr, &wrptr)) {
|
|
mwifiex_dbg(adapter, ERROR,
|
|
"EventReady: failed to read reg->evt_wrptr\n");
|
|
return -1;
|
|
}
|
|
|
|
mwifiex_dbg(adapter, EVENT,
|
|
"info: EventReady: Initial <Rd: 0x%x, Wr: 0x%x>",
|
|
card->evtbd_rdptr, wrptr);
|
|
if (((wrptr & MWIFIEX_EVTBD_MASK) != (card->evtbd_rdptr
|
|
& MWIFIEX_EVTBD_MASK)) ||
|
|
((wrptr & reg->evt_rollover_ind) ==
|
|
(card->evtbd_rdptr & reg->evt_rollover_ind))) {
|
|
struct sk_buff *skb_cmd;
|
|
__le16 data_len = 0;
|
|
u16 evt_len;
|
|
|
|
mwifiex_dbg(adapter, INFO,
|
|
"info: Read Index: %d\n", rdptr);
|
|
skb_cmd = card->evt_buf_list[rdptr];
|
|
mwifiex_unmap_pci_memory(adapter, skb_cmd, DMA_FROM_DEVICE);
|
|
|
|
/* Take the pointer and set it to event pointer in adapter
|
|
and will return back after event handling callback */
|
|
card->evt_buf_list[rdptr] = NULL;
|
|
desc = card->evtbd_ring[rdptr];
|
|
memset(desc, 0, sizeof(*desc));
|
|
|
|
event = get_unaligned_le32(
|
|
&skb_cmd->data[adapter->intf_hdr_len]);
|
|
adapter->event_cause = event;
|
|
/* The first 4bytes will be the event transfer header
|
|
len is 2 bytes followed by type which is 2 bytes */
|
|
memcpy(&data_len, skb_cmd->data, sizeof(__le16));
|
|
evt_len = le16_to_cpu(data_len);
|
|
skb_trim(skb_cmd, evt_len);
|
|
skb_pull(skb_cmd, adapter->intf_hdr_len);
|
|
mwifiex_dbg(adapter, EVENT,
|
|
"info: Event length: %d\n", evt_len);
|
|
|
|
if (evt_len > MWIFIEX_EVENT_HEADER_LEN &&
|
|
evt_len < MAX_EVENT_SIZE)
|
|
memcpy(adapter->event_body, skb_cmd->data +
|
|
MWIFIEX_EVENT_HEADER_LEN, evt_len -
|
|
MWIFIEX_EVENT_HEADER_LEN);
|
|
|
|
adapter->event_received = true;
|
|
adapter->event_skb = skb_cmd;
|
|
|
|
/* Do not update the event read pointer here, wait till the
|
|
buffer is released. This is just to make things simpler,
|
|
we need to find a better method of managing these buffers.
|
|
*/
|
|
} else {
|
|
if (mwifiex_write_reg(adapter, PCIE_CPU_INT_EVENT,
|
|
CPU_INTR_EVENT_DONE)) {
|
|
mwifiex_dbg(adapter, ERROR,
|
|
"Write register failed\n");
|
|
return -1;
|
|
}
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
/*
|
|
* Event processing complete handler
|
|
*/
|
|
static int mwifiex_pcie_event_complete(struct mwifiex_adapter *adapter,
|
|
struct sk_buff *skb)
|
|
{
|
|
struct pcie_service_card *card = adapter->card;
|
|
const struct mwifiex_pcie_card_reg *reg = card->pcie.reg;
|
|
int ret = 0;
|
|
u32 rdptr = card->evtbd_rdptr & MWIFIEX_EVTBD_MASK;
|
|
u32 wrptr;
|
|
struct mwifiex_evt_buf_desc *desc;
|
|
|
|
if (!skb)
|
|
return 0;
|
|
|
|
if (rdptr >= MWIFIEX_MAX_EVT_BD) {
|
|
mwifiex_dbg(adapter, ERROR,
|
|
"event_complete: Invalid rdptr 0x%x\n",
|
|
rdptr);
|
|
return -EINVAL;
|
|
}
|
|
|
|
/* Read the event ring write pointer set by firmware */
|
|
if (mwifiex_read_reg(adapter, reg->evt_wrptr, &wrptr)) {
|
|
mwifiex_dbg(adapter, ERROR,
|
|
"event_complete: failed to read reg->evt_wrptr\n");
|
|
return -1;
|
|
}
|
|
|
|
if (!card->evt_buf_list[rdptr]) {
|
|
skb_push(skb, adapter->intf_hdr_len);
|
|
skb_put(skb, MAX_EVENT_SIZE - skb->len);
|
|
if (mwifiex_map_pci_memory(adapter, skb,
|
|
MAX_EVENT_SIZE,
|
|
DMA_FROM_DEVICE))
|
|
return -1;
|
|
card->evt_buf_list[rdptr] = skb;
|
|
desc = card->evtbd_ring[rdptr];
|
|
desc->paddr = MWIFIEX_SKB_DMA_ADDR(skb);
|
|
desc->len = (u16)skb->len;
|
|
desc->flags = 0;
|
|
skb = NULL;
|
|
} else {
|
|
mwifiex_dbg(adapter, ERROR,
|
|
"info: ERROR: buf still valid at index %d, <%p, %p>\n",
|
|
rdptr, card->evt_buf_list[rdptr], skb);
|
|
}
|
|
|
|
if ((++card->evtbd_rdptr & MWIFIEX_EVTBD_MASK) == MWIFIEX_MAX_EVT_BD) {
|
|
card->evtbd_rdptr = ((card->evtbd_rdptr &
|
|
reg->evt_rollover_ind) ^
|
|
reg->evt_rollover_ind);
|
|
}
|
|
|
|
mwifiex_dbg(adapter, EVENT,
|
|
"info: Updated <Rd: 0x%x, Wr: 0x%x>",
|
|
card->evtbd_rdptr, wrptr);
|
|
|
|
/* Write the event ring read pointer in to reg->evt_rdptr */
|
|
if (mwifiex_write_reg(adapter, reg->evt_rdptr,
|
|
card->evtbd_rdptr)) {
|
|
mwifiex_dbg(adapter, ERROR,
|
|
"event_complete: failed to read reg->evt_rdptr\n");
|
|
return -1;
|
|
}
|
|
|
|
mwifiex_dbg(adapter, EVENT,
|
|
"info: Check Events Again\n");
|
|
ret = mwifiex_pcie_process_event_ready(adapter);
|
|
|
|
return ret;
|
|
}
|
|
|
|
/* Combo firmware image is a combination of
|
|
* (1) combo crc heaer, start with CMD5
|
|
* (2) bluetooth image, start with CMD7, end with CMD6, data wrapped in CMD1.
|
|
* (3) wifi image.
|
|
*
|
|
* This function bypass the header and bluetooth part, return
|
|
* the offset of tail wifi-only part. If the image is already wifi-only,
|
|
* that is start with CMD1, return 0.
|
|
*/
|
|
|
|
static int mwifiex_extract_wifi_fw(struct mwifiex_adapter *adapter,
|
|
const void *firmware, u32 firmware_len) {
|
|
const struct mwifiex_fw_data *fwdata;
|
|
u32 offset = 0, data_len, dnld_cmd;
|
|
int ret = 0;
|
|
bool cmd7_before = false, first_cmd = false;
|
|
|
|
while (1) {
|
|
/* Check for integer and buffer overflow */
|
|
if (offset + sizeof(fwdata->header) < sizeof(fwdata->header) ||
|
|
offset + sizeof(fwdata->header) >= firmware_len) {
|
|
mwifiex_dbg(adapter, ERROR,
|
|
"extract wifi-only fw failure!\n");
|
|
ret = -1;
|
|
goto done;
|
|
}
|
|
|
|
fwdata = firmware + offset;
|
|
dnld_cmd = le32_to_cpu(fwdata->header.dnld_cmd);
|
|
data_len = le32_to_cpu(fwdata->header.data_length);
|
|
|
|
/* Skip past header */
|
|
offset += sizeof(fwdata->header);
|
|
|
|
switch (dnld_cmd) {
|
|
case MWIFIEX_FW_DNLD_CMD_1:
|
|
if (offset + data_len < data_len) {
|
|
mwifiex_dbg(adapter, ERROR, "bad FW parse\n");
|
|
ret = -1;
|
|
goto done;
|
|
}
|
|
|
|
/* Image start with cmd1, already wifi-only firmware */
|
|
if (!first_cmd) {
|
|
mwifiex_dbg(adapter, MSG,
|
|
"input wifi-only firmware\n");
|
|
return 0;
|
|
}
|
|
|
|
if (!cmd7_before) {
|
|
mwifiex_dbg(adapter, ERROR,
|
|
"no cmd7 before cmd1!\n");
|
|
ret = -1;
|
|
goto done;
|
|
}
|
|
offset += data_len;
|
|
break;
|
|
case MWIFIEX_FW_DNLD_CMD_5:
|
|
first_cmd = true;
|
|
/* Check for integer overflow */
|
|
if (offset + data_len < data_len) {
|
|
mwifiex_dbg(adapter, ERROR, "bad FW parse\n");
|
|
ret = -1;
|
|
goto done;
|
|
}
|
|
offset += data_len;
|
|
break;
|
|
case MWIFIEX_FW_DNLD_CMD_6:
|
|
first_cmd = true;
|
|
/* Check for integer overflow */
|
|
if (offset + data_len < data_len) {
|
|
mwifiex_dbg(adapter, ERROR, "bad FW parse\n");
|
|
ret = -1;
|
|
goto done;
|
|
}
|
|
offset += data_len;
|
|
if (offset >= firmware_len) {
|
|
mwifiex_dbg(adapter, ERROR,
|
|
"extract wifi-only fw failure!\n");
|
|
ret = -1;
|
|
} else {
|
|
ret = offset;
|
|
}
|
|
goto done;
|
|
case MWIFIEX_FW_DNLD_CMD_7:
|
|
first_cmd = true;
|
|
cmd7_before = true;
|
|
break;
|
|
default:
|
|
mwifiex_dbg(adapter, ERROR, "unknown dnld_cmd %d\n",
|
|
dnld_cmd);
|
|
ret = -1;
|
|
goto done;
|
|
}
|
|
}
|
|
|
|
done:
|
|
return ret;
|
|
}
|
|
|
|
/*
|
|
* This function downloads the firmware to the card.
|
|
*
|
|
* Firmware is downloaded to the card in blocks. Every block download
|
|
* is tested for CRC errors, and retried a number of times before
|
|
* returning failure.
|
|
*/
|
|
static int mwifiex_prog_fw_w_helper(struct mwifiex_adapter *adapter,
|
|
struct mwifiex_fw_image *fw)
|
|
{
|
|
int ret;
|
|
u8 *firmware = fw->fw_buf;
|
|
u32 firmware_len = fw->fw_len;
|
|
u32 offset = 0;
|
|
struct sk_buff *skb;
|
|
u32 txlen, tx_blocks = 0, tries, len, val;
|
|
u32 block_retry_cnt = 0;
|
|
struct pcie_service_card *card = adapter->card;
|
|
const struct mwifiex_pcie_card_reg *reg = card->pcie.reg;
|
|
|
|
if (!firmware || !firmware_len) {
|
|
mwifiex_dbg(adapter, ERROR,
|
|
"No firmware image found! Terminating download\n");
|
|
return -1;
|
|
}
|
|
|
|
mwifiex_dbg(adapter, INFO,
|
|
"info: Downloading FW image (%d bytes)\n",
|
|
firmware_len);
|
|
|
|
if (mwifiex_pcie_disable_host_int(adapter)) {
|
|
mwifiex_dbg(adapter, ERROR,
|
|
"%s: Disabling interrupts failed.\n", __func__);
|
|
return -1;
|
|
}
|
|
|
|
skb = dev_alloc_skb(MWIFIEX_UPLD_SIZE);
|
|
if (!skb) {
|
|
ret = -ENOMEM;
|
|
goto done;
|
|
}
|
|
|
|
ret = mwifiex_read_reg(adapter, PCIE_SCRATCH_13_REG, &val);
|
|
if (ret) {
|
|
mwifiex_dbg(adapter, FATAL, "Failed to read scratch register 13\n");
|
|
goto done;
|
|
}
|
|
|
|
/* PCIE FLR case: extract wifi part from combo firmware*/
|
|
if (val == MWIFIEX_PCIE_FLR_HAPPENS) {
|
|
ret = mwifiex_extract_wifi_fw(adapter, firmware, firmware_len);
|
|
if (ret < 0) {
|
|
mwifiex_dbg(adapter, ERROR, "Failed to extract wifi fw\n");
|
|
goto done;
|
|
}
|
|
offset = ret;
|
|
mwifiex_dbg(adapter, MSG,
|
|
"info: dnld wifi firmware from %d bytes\n", offset);
|
|
}
|
|
|
|
/* Perform firmware data transfer */
|
|
do {
|
|
u32 ireg_intr = 0;
|
|
|
|
/* More data? */
|
|
if (offset >= firmware_len)
|
|
break;
|
|
|
|
for (tries = 0; tries < MAX_POLL_TRIES; tries++) {
|
|
ret = mwifiex_read_reg(adapter, reg->cmd_size,
|
|
&len);
|
|
if (ret) {
|
|
mwifiex_dbg(adapter, FATAL,
|
|
"Failed reading len from boot code\n");
|
|
goto done;
|
|
}
|
|
if (len)
|
|
break;
|
|
usleep_range(10, 20);
|
|
}
|
|
|
|
if (!len) {
|
|
break;
|
|
} else if (len > MWIFIEX_UPLD_SIZE) {
|
|
mwifiex_dbg(adapter, ERROR,
|
|
"FW download failure @ %d, invalid length %d\n",
|
|
offset, len);
|
|
ret = -1;
|
|
goto done;
|
|
}
|
|
|
|
txlen = len;
|
|
|
|
if (len & BIT(0)) {
|
|
block_retry_cnt++;
|
|
if (block_retry_cnt > MAX_WRITE_IOMEM_RETRY) {
|
|
mwifiex_dbg(adapter, ERROR,
|
|
"FW download failure @ %d, over max\t"
|
|
"retry count\n", offset);
|
|
ret = -1;
|
|
goto done;
|
|
}
|
|
mwifiex_dbg(adapter, ERROR,
|
|
"FW CRC error indicated by the\t"
|
|
"helper: len = 0x%04X, txlen = %d\n",
|
|
len, txlen);
|
|
len &= ~BIT(0);
|
|
/* Setting this to 0 to resend from same offset */
|
|
txlen = 0;
|
|
} else {
|
|
block_retry_cnt = 0;
|
|
/* Set blocksize to transfer - checking for
|
|
last block */
|
|
if (firmware_len - offset < txlen)
|
|
txlen = firmware_len - offset;
|
|
|
|
tx_blocks = (txlen + card->pcie.blksz_fw_dl - 1) /
|
|
card->pcie.blksz_fw_dl;
|
|
|
|
/* Copy payload to buffer */
|
|
memmove(skb->data, &firmware[offset], txlen);
|
|
}
|
|
|
|
skb_put(skb, MWIFIEX_UPLD_SIZE - skb->len);
|
|
skb_trim(skb, tx_blocks * card->pcie.blksz_fw_dl);
|
|
|
|
/* Send the boot command to device */
|
|
if (mwifiex_pcie_send_boot_cmd(adapter, skb)) {
|
|
mwifiex_dbg(adapter, ERROR,
|
|
"Failed to send firmware download command\n");
|
|
ret = -1;
|
|
goto done;
|
|
}
|
|
|
|
/* Wait for the command done interrupt */
|
|
for (tries = 0; tries < MAX_POLL_TRIES; tries++) {
|
|
if (mwifiex_read_reg(adapter, PCIE_CPU_INT_STATUS,
|
|
&ireg_intr)) {
|
|
mwifiex_dbg(adapter, ERROR,
|
|
"%s: Failed to read\t"
|
|
"interrupt status during fw dnld.\n",
|
|
__func__);
|
|
mwifiex_unmap_pci_memory(adapter, skb,
|
|
DMA_TO_DEVICE);
|
|
ret = -1;
|
|
goto done;
|
|
}
|
|
if (!(ireg_intr & CPU_INTR_DOOR_BELL))
|
|
break;
|
|
usleep_range(10, 20);
|
|
}
|
|
if (ireg_intr & CPU_INTR_DOOR_BELL) {
|
|
mwifiex_dbg(adapter, ERROR, "%s: Card failed to ACK download\n",
|
|
__func__);
|
|
mwifiex_unmap_pci_memory(adapter, skb,
|
|
DMA_TO_DEVICE);
|
|
ret = -1;
|
|
goto done;
|
|
}
|
|
|
|
mwifiex_unmap_pci_memory(adapter, skb, DMA_TO_DEVICE);
|
|
|
|
offset += txlen;
|
|
} while (true);
|
|
|
|
mwifiex_dbg(adapter, MSG,
|
|
"info: FW download over, size %d bytes\n", offset);
|
|
|
|
ret = 0;
|
|
|
|
done:
|
|
dev_kfree_skb_any(skb);
|
|
return ret;
|
|
}
|
|
|
|
/*
|
|
* This function checks the firmware status in card.
|
|
*/
|
|
static int
|
|
mwifiex_check_fw_status(struct mwifiex_adapter *adapter, u32 poll_num)
|
|
{
|
|
int ret = 0;
|
|
u32 firmware_stat;
|
|
struct pcie_service_card *card = adapter->card;
|
|
const struct mwifiex_pcie_card_reg *reg = card->pcie.reg;
|
|
u32 tries;
|
|
|
|
/* Mask spurios interrupts */
|
|
if (mwifiex_write_reg(adapter, PCIE_HOST_INT_STATUS_MASK,
|
|
HOST_INTR_MASK)) {
|
|
mwifiex_dbg(adapter, ERROR,
|
|
"Write register failed\n");
|
|
return -1;
|
|
}
|
|
|
|
mwifiex_dbg(adapter, INFO,
|
|
"Setting driver ready signature\n");
|
|
if (mwifiex_write_reg(adapter, reg->drv_rdy,
|
|
FIRMWARE_READY_PCIE)) {
|
|
mwifiex_dbg(adapter, ERROR,
|
|
"Failed to write driver ready signature\n");
|
|
return -1;
|
|
}
|
|
|
|
/* Wait for firmware initialization event */
|
|
for (tries = 0; tries < poll_num; tries++) {
|
|
if (mwifiex_read_reg(adapter, reg->fw_status,
|
|
&firmware_stat))
|
|
ret = -1;
|
|
else
|
|
ret = 0;
|
|
|
|
mwifiex_dbg(adapter, INFO, "Try %d if FW is ready <%d,%#x>",
|
|
tries, ret, firmware_stat);
|
|
|
|
if (ret)
|
|
continue;
|
|
if (firmware_stat == FIRMWARE_READY_PCIE) {
|
|
ret = 0;
|
|
break;
|
|
} else {
|
|
msleep(100);
|
|
ret = -1;
|
|
}
|
|
}
|
|
|
|
return ret;
|
|
}
|
|
|
|
/* This function checks if WLAN is the winner.
|
|
*/
|
|
static int
|
|
mwifiex_check_winner_status(struct mwifiex_adapter *adapter)
|
|
{
|
|
u32 winner = 0;
|
|
int ret = 0;
|
|
struct pcie_service_card *card = adapter->card;
|
|
const struct mwifiex_pcie_card_reg *reg = card->pcie.reg;
|
|
|
|
if (mwifiex_read_reg(adapter, reg->fw_status, &winner)) {
|
|
ret = -1;
|
|
} else if (!winner) {
|
|
mwifiex_dbg(adapter, INFO, "PCI-E is the winner\n");
|
|
adapter->winner = 1;
|
|
} else {
|
|
mwifiex_dbg(adapter, ERROR,
|
|
"PCI-E is not the winner <%#x>", winner);
|
|
}
|
|
|
|
return ret;
|
|
}
|
|
|
|
/*
|
|
* This function reads the interrupt status from card.
|
|
*/
|
|
static void mwifiex_interrupt_status(struct mwifiex_adapter *adapter,
|
|
int msg_id)
|
|
{
|
|
u32 pcie_ireg;
|
|
unsigned long flags;
|
|
struct pcie_service_card *card = adapter->card;
|
|
|
|
if (card->msi_enable) {
|
|
spin_lock_irqsave(&adapter->int_lock, flags);
|
|
adapter->int_status = 1;
|
|
spin_unlock_irqrestore(&adapter->int_lock, flags);
|
|
return;
|
|
}
|
|
|
|
if (!mwifiex_pcie_ok_to_access_hw(adapter))
|
|
return;
|
|
|
|
if (card->msix_enable && msg_id >= 0) {
|
|
pcie_ireg = BIT(msg_id);
|
|
} else {
|
|
if (mwifiex_read_reg(adapter, PCIE_HOST_INT_STATUS,
|
|
&pcie_ireg)) {
|
|
mwifiex_dbg(adapter, ERROR, "Read register failed\n");
|
|
return;
|
|
}
|
|
|
|
if ((pcie_ireg == 0xFFFFFFFF) || !pcie_ireg)
|
|
return;
|
|
|
|
|
|
mwifiex_pcie_disable_host_int(adapter);
|
|
|
|
/* Clear the pending interrupts */
|
|
if (mwifiex_write_reg(adapter, PCIE_HOST_INT_STATUS,
|
|
~pcie_ireg)) {
|
|
mwifiex_dbg(adapter, ERROR,
|
|
"Write register failed\n");
|
|
return;
|
|
}
|
|
}
|
|
|
|
if (!adapter->pps_uapsd_mode &&
|
|
adapter->ps_state == PS_STATE_SLEEP &&
|
|
mwifiex_pcie_ok_to_access_hw(adapter)) {
|
|
/* Potentially for PCIe we could get other
|
|
* interrupts like shared. Don't change power
|
|
* state until cookie is set
|
|
*/
|
|
adapter->ps_state = PS_STATE_AWAKE;
|
|
adapter->pm_wakeup_fw_try = false;
|
|
del_timer(&adapter->wakeup_timer);
|
|
}
|
|
|
|
spin_lock_irqsave(&adapter->int_lock, flags);
|
|
adapter->int_status |= pcie_ireg;
|
|
spin_unlock_irqrestore(&adapter->int_lock, flags);
|
|
mwifiex_dbg(adapter, INTR, "ireg: 0x%08x\n", pcie_ireg);
|
|
}
|
|
|
|
/*
|
|
* Interrupt handler for PCIe root port
|
|
*
|
|
* This function reads the interrupt status from firmware and assigns
|
|
* the main process in workqueue which will handle the interrupt.
|
|
*/
|
|
static irqreturn_t mwifiex_pcie_interrupt(int irq, void *context)
|
|
{
|
|
struct mwifiex_msix_context *ctx = context;
|
|
struct pci_dev *pdev = ctx->dev;
|
|
struct pcie_service_card *card;
|
|
struct mwifiex_adapter *adapter;
|
|
|
|
card = pci_get_drvdata(pdev);
|
|
|
|
if (!card->adapter) {
|
|
pr_err("info: %s: card=%p adapter=%p\n", __func__, card,
|
|
card ? card->adapter : NULL);
|
|
goto exit;
|
|
}
|
|
adapter = card->adapter;
|
|
|
|
if (test_bit(MWIFIEX_SURPRISE_REMOVED, &adapter->work_flags))
|
|
goto exit;
|
|
|
|
if (card->msix_enable)
|
|
mwifiex_interrupt_status(adapter, ctx->msg_id);
|
|
else
|
|
mwifiex_interrupt_status(adapter, -1);
|
|
|
|
mwifiex_queue_main_work(adapter);
|
|
|
|
exit:
|
|
return IRQ_HANDLED;
|
|
}
|
|
|
|
/*
|
|
* This function checks the current interrupt status.
|
|
*
|
|
* The following interrupts are checked and handled by this function -
|
|
* - Data sent
|
|
* - Command sent
|
|
* - Command received
|
|
* - Packets received
|
|
* - Events received
|
|
*
|
|
* In case of Rx packets received, the packets are uploaded from card to
|
|
* host and processed accordingly.
|
|
*/
|
|
static int mwifiex_process_int_status(struct mwifiex_adapter *adapter)
|
|
{
|
|
int ret;
|
|
u32 pcie_ireg = 0;
|
|
unsigned long flags;
|
|
struct pcie_service_card *card = adapter->card;
|
|
|
|
spin_lock_irqsave(&adapter->int_lock, flags);
|
|
if (!card->msi_enable) {
|
|
/* Clear out unused interrupts */
|
|
pcie_ireg = adapter->int_status;
|
|
}
|
|
adapter->int_status = 0;
|
|
spin_unlock_irqrestore(&adapter->int_lock, flags);
|
|
|
|
if (card->msi_enable) {
|
|
if (mwifiex_pcie_ok_to_access_hw(adapter)) {
|
|
if (mwifiex_read_reg(adapter, PCIE_HOST_INT_STATUS,
|
|
&pcie_ireg)) {
|
|
mwifiex_dbg(adapter, ERROR,
|
|
"Read register failed\n");
|
|
return -1;
|
|
}
|
|
|
|
if ((pcie_ireg != 0xFFFFFFFF) && (pcie_ireg)) {
|
|
if (mwifiex_write_reg(adapter,
|
|
PCIE_HOST_INT_STATUS,
|
|
~pcie_ireg)) {
|
|
mwifiex_dbg(adapter, ERROR,
|
|
"Write register failed\n");
|
|
return -1;
|
|
}
|
|
if (!adapter->pps_uapsd_mode &&
|
|
adapter->ps_state == PS_STATE_SLEEP) {
|
|
adapter->ps_state = PS_STATE_AWAKE;
|
|
adapter->pm_wakeup_fw_try = false;
|
|
del_timer(&adapter->wakeup_timer);
|
|
}
|
|
}
|
|
}
|
|
}
|
|
|
|
if (pcie_ireg & HOST_INTR_DNLD_DONE) {
|
|
mwifiex_dbg(adapter, INTR, "info: TX DNLD Done\n");
|
|
ret = mwifiex_pcie_send_data_complete(adapter);
|
|
if (ret)
|
|
return ret;
|
|
}
|
|
if (pcie_ireg & HOST_INTR_UPLD_RDY) {
|
|
mwifiex_dbg(adapter, INTR, "info: Rx DATA\n");
|
|
ret = mwifiex_pcie_process_recv_data(adapter);
|
|
if (ret)
|
|
return ret;
|
|
}
|
|
if (pcie_ireg & HOST_INTR_EVENT_RDY) {
|
|
mwifiex_dbg(adapter, INTR, "info: Rx EVENT\n");
|
|
ret = mwifiex_pcie_process_event_ready(adapter);
|
|
if (ret)
|
|
return ret;
|
|
}
|
|
if (pcie_ireg & HOST_INTR_CMD_DONE) {
|
|
if (adapter->cmd_sent) {
|
|
mwifiex_dbg(adapter, INTR,
|
|
"info: CMD sent Interrupt\n");
|
|
adapter->cmd_sent = false;
|
|
}
|
|
/* Handle command response */
|
|
ret = mwifiex_pcie_process_cmd_complete(adapter);
|
|
if (ret)
|
|
return ret;
|
|
}
|
|
|
|
mwifiex_dbg(adapter, INTR,
|
|
"info: cmd_sent=%d data_sent=%d\n",
|
|
adapter->cmd_sent, adapter->data_sent);
|
|
if (!card->msi_enable && !card->msix_enable &&
|
|
adapter->ps_state != PS_STATE_SLEEP)
|
|
mwifiex_pcie_enable_host_int(adapter);
|
|
|
|
return 0;
|
|
}
|
|
|
|
/*
|
|
* This function downloads data from driver to card.
|
|
*
|
|
* Both commands and data packets are transferred to the card by this
|
|
* function.
|
|
*
|
|
* This function adds the PCIE specific header to the front of the buffer
|
|
* before transferring. The header contains the length of the packet and
|
|
* the type. The firmware handles the packets based upon this set type.
|
|
*/
|
|
static int mwifiex_pcie_host_to_card(struct mwifiex_adapter *adapter, u8 type,
|
|
struct sk_buff *skb,
|
|
struct mwifiex_tx_param *tx_param)
|
|
{
|
|
if (!skb) {
|
|
mwifiex_dbg(adapter, ERROR,
|
|
"Passed NULL skb to %s\n", __func__);
|
|
return -1;
|
|
}
|
|
|
|
if (type == MWIFIEX_TYPE_DATA)
|
|
return mwifiex_pcie_send_data(adapter, skb, tx_param);
|
|
else if (type == MWIFIEX_TYPE_CMD)
|
|
return mwifiex_pcie_send_cmd(adapter, skb);
|
|
|
|
return 0;
|
|
}
|
|
|
|
/* Function to dump PCIE scratch registers in case of FW crash
|
|
*/
|
|
static int
|
|
mwifiex_pcie_reg_dump(struct mwifiex_adapter *adapter, char *drv_buf)
|
|
{
|
|
char *p = drv_buf;
|
|
char buf[256], *ptr;
|
|
int i;
|
|
u32 value;
|
|
struct pcie_service_card *card = adapter->card;
|
|
const struct mwifiex_pcie_card_reg *reg = card->pcie.reg;
|
|
int pcie_scratch_reg[] = {PCIE_SCRATCH_12_REG,
|
|
PCIE_SCRATCH_14_REG,
|
|
PCIE_SCRATCH_15_REG};
|
|
|
|
if (!p)
|
|
return 0;
|
|
|
|
mwifiex_dbg(adapter, MSG, "PCIE register dump start\n");
|
|
|
|
if (mwifiex_read_reg(adapter, reg->fw_status, &value)) {
|
|
mwifiex_dbg(adapter, ERROR, "failed to read firmware status");
|
|
return 0;
|
|
}
|
|
|
|
ptr = buf;
|
|
mwifiex_dbg(adapter, MSG, "pcie scratch register:");
|
|
for (i = 0; i < ARRAY_SIZE(pcie_scratch_reg); i++) {
|
|
mwifiex_read_reg(adapter, pcie_scratch_reg[i], &value);
|
|
ptr += sprintf(ptr, "reg:0x%x, value=0x%x\n",
|
|
pcie_scratch_reg[i], value);
|
|
}
|
|
|
|
mwifiex_dbg(adapter, MSG, "%s\n", buf);
|
|
p += sprintf(p, "%s\n", buf);
|
|
|
|
mwifiex_dbg(adapter, MSG, "PCIE register dump end\n");
|
|
|
|
return p - drv_buf;
|
|
}
|
|
|
|
/* This function read/write firmware */
|
|
static enum rdwr_status
|
|
mwifiex_pcie_rdwr_firmware(struct mwifiex_adapter *adapter, u8 doneflag)
|
|
{
|
|
int ret, tries;
|
|
u8 ctrl_data;
|
|
u32 fw_status;
|
|
struct pcie_service_card *card = adapter->card;
|
|
const struct mwifiex_pcie_card_reg *reg = card->pcie.reg;
|
|
|
|
if (mwifiex_read_reg(adapter, reg->fw_status, &fw_status))
|
|
return RDWR_STATUS_FAILURE;
|
|
|
|
ret = mwifiex_write_reg(adapter, reg->fw_dump_ctrl,
|
|
reg->fw_dump_host_ready);
|
|
if (ret) {
|
|
mwifiex_dbg(adapter, ERROR,
|
|
"PCIE write err\n");
|
|
return RDWR_STATUS_FAILURE;
|
|
}
|
|
|
|
for (tries = 0; tries < MAX_POLL_TRIES; tries++) {
|
|
mwifiex_read_reg_byte(adapter, reg->fw_dump_ctrl, &ctrl_data);
|
|
if (ctrl_data == FW_DUMP_DONE)
|
|
return RDWR_STATUS_SUCCESS;
|
|
if (doneflag && ctrl_data == doneflag)
|
|
return RDWR_STATUS_DONE;
|
|
if (ctrl_data != reg->fw_dump_host_ready) {
|
|
mwifiex_dbg(adapter, WARN,
|
|
"The ctrl reg was changed, re-try again!\n");
|
|
ret = mwifiex_write_reg(adapter, reg->fw_dump_ctrl,
|
|
reg->fw_dump_host_ready);
|
|
if (ret) {
|
|
mwifiex_dbg(adapter, ERROR,
|
|
"PCIE write err\n");
|
|
return RDWR_STATUS_FAILURE;
|
|
}
|
|
}
|
|
usleep_range(100, 200);
|
|
}
|
|
|
|
mwifiex_dbg(adapter, ERROR, "Fail to pull ctrl_data\n");
|
|
return RDWR_STATUS_FAILURE;
|
|
}
|
|
|
|
/* This function dump firmware memory to file */
|
|
static void mwifiex_pcie_fw_dump(struct mwifiex_adapter *adapter)
|
|
{
|
|
struct pcie_service_card *card = adapter->card;
|
|
const struct mwifiex_pcie_card_reg *creg = card->pcie.reg;
|
|
unsigned int reg, reg_start, reg_end;
|
|
u8 *dbg_ptr, *end_ptr, *tmp_ptr, fw_dump_num, dump_num;
|
|
u8 idx, i, read_reg, doneflag = 0;
|
|
enum rdwr_status stat;
|
|
u32 memory_size;
|
|
int ret;
|
|
|
|
if (!card->pcie.can_dump_fw)
|
|
return;
|
|
|
|
for (idx = 0; idx < adapter->num_mem_types; idx++) {
|
|
struct memory_type_mapping *entry =
|
|
&adapter->mem_type_mapping_tbl[idx];
|
|
|
|
if (entry->mem_ptr) {
|
|
vfree(entry->mem_ptr);
|
|
entry->mem_ptr = NULL;
|
|
}
|
|
entry->mem_size = 0;
|
|
}
|
|
|
|
mwifiex_dbg(adapter, MSG, "== mwifiex firmware dump start ==\n");
|
|
|
|
/* Read the number of the memories which will dump */
|
|
stat = mwifiex_pcie_rdwr_firmware(adapter, doneflag);
|
|
if (stat == RDWR_STATUS_FAILURE)
|
|
return;
|
|
|
|
reg = creg->fw_dump_start;
|
|
mwifiex_read_reg_byte(adapter, reg, &fw_dump_num);
|
|
|
|
/* W8997 chipset firmware dump will be restore in single region*/
|
|
if (fw_dump_num == 0)
|
|
dump_num = 1;
|
|
else
|
|
dump_num = fw_dump_num;
|
|
|
|
/* Read the length of every memory which will dump */
|
|
for (idx = 0; idx < dump_num; idx++) {
|
|
struct memory_type_mapping *entry =
|
|
&adapter->mem_type_mapping_tbl[idx];
|
|
memory_size = 0;
|
|
if (fw_dump_num != 0) {
|
|
stat = mwifiex_pcie_rdwr_firmware(adapter, doneflag);
|
|
if (stat == RDWR_STATUS_FAILURE)
|
|
return;
|
|
|
|
reg = creg->fw_dump_start;
|
|
for (i = 0; i < 4; i++) {
|
|
mwifiex_read_reg_byte(adapter, reg, &read_reg);
|
|
memory_size |= (read_reg << (i * 8));
|
|
reg++;
|
|
}
|
|
} else {
|
|
memory_size = MWIFIEX_FW_DUMP_MAX_MEMSIZE;
|
|
}
|
|
|
|
if (memory_size == 0) {
|
|
mwifiex_dbg(adapter, MSG, "Firmware dump Finished!\n");
|
|
ret = mwifiex_write_reg(adapter, creg->fw_dump_ctrl,
|
|
creg->fw_dump_read_done);
|
|
if (ret) {
|
|
mwifiex_dbg(adapter, ERROR, "PCIE write err\n");
|
|
return;
|
|
}
|
|
break;
|
|
}
|
|
|
|
mwifiex_dbg(adapter, DUMP,
|
|
"%s_SIZE=0x%x\n", entry->mem_name, memory_size);
|
|
entry->mem_ptr = vmalloc(memory_size + 1);
|
|
entry->mem_size = memory_size;
|
|
if (!entry->mem_ptr) {
|
|
mwifiex_dbg(adapter, ERROR,
|
|
"Vmalloc %s failed\n", entry->mem_name);
|
|
return;
|
|
}
|
|
dbg_ptr = entry->mem_ptr;
|
|
end_ptr = dbg_ptr + memory_size;
|
|
|
|
doneflag = entry->done_flag;
|
|
mwifiex_dbg(adapter, DUMP, "Start %s output, please wait...\n",
|
|
entry->mem_name);
|
|
|
|
do {
|
|
stat = mwifiex_pcie_rdwr_firmware(adapter, doneflag);
|
|
if (RDWR_STATUS_FAILURE == stat)
|
|
return;
|
|
|
|
reg_start = creg->fw_dump_start;
|
|
reg_end = creg->fw_dump_end;
|
|
for (reg = reg_start; reg <= reg_end; reg++) {
|
|
mwifiex_read_reg_byte(adapter, reg, dbg_ptr);
|
|
if (dbg_ptr < end_ptr) {
|
|
dbg_ptr++;
|
|
continue;
|
|
}
|
|
mwifiex_dbg(adapter, ERROR,
|
|
"pre-allocated buf not enough\n");
|
|
tmp_ptr =
|
|
vzalloc(memory_size + MWIFIEX_SIZE_4K);
|
|
if (!tmp_ptr)
|
|
return;
|
|
memcpy(tmp_ptr, entry->mem_ptr, memory_size);
|
|
vfree(entry->mem_ptr);
|
|
entry->mem_ptr = tmp_ptr;
|
|
tmp_ptr = NULL;
|
|
dbg_ptr = entry->mem_ptr + memory_size;
|
|
memory_size += MWIFIEX_SIZE_4K;
|
|
end_ptr = entry->mem_ptr + memory_size;
|
|
}
|
|
|
|
if (stat != RDWR_STATUS_DONE)
|
|
continue;
|
|
|
|
mwifiex_dbg(adapter, DUMP,
|
|
"%s done: size=0x%tx\n",
|
|
entry->mem_name, dbg_ptr - entry->mem_ptr);
|
|
break;
|
|
} while (true);
|
|
}
|
|
mwifiex_dbg(adapter, MSG, "== mwifiex firmware dump end ==\n");
|
|
}
|
|
|
|
static void mwifiex_pcie_device_dump_work(struct mwifiex_adapter *adapter)
|
|
{
|
|
adapter->devdump_data = vzalloc(MWIFIEX_FW_DUMP_SIZE);
|
|
if (!adapter->devdump_data) {
|
|
mwifiex_dbg(adapter, ERROR,
|
|
"vzalloc devdump data failure!\n");
|
|
return;
|
|
}
|
|
|
|
mwifiex_drv_info_dump(adapter);
|
|
mwifiex_pcie_fw_dump(adapter);
|
|
mwifiex_prepare_fw_dump_info(adapter);
|
|
mwifiex_upload_device_dump(adapter);
|
|
}
|
|
|
|
static void mwifiex_pcie_card_reset_work(struct mwifiex_adapter *adapter)
|
|
{
|
|
struct pcie_service_card *card = adapter->card;
|
|
|
|
/* We can't afford to wait here; remove() might be waiting on us. If we
|
|
* can't grab the device lock, maybe we'll get another chance later.
|
|
*/
|
|
pci_try_reset_function(card->dev);
|
|
}
|
|
|
|
static void mwifiex_pcie_work(struct work_struct *work)
|
|
{
|
|
struct pcie_service_card *card =
|
|
container_of(work, struct pcie_service_card, work);
|
|
|
|
if (test_and_clear_bit(MWIFIEX_IFACE_WORK_DEVICE_DUMP,
|
|
&card->work_flags))
|
|
mwifiex_pcie_device_dump_work(card->adapter);
|
|
if (test_and_clear_bit(MWIFIEX_IFACE_WORK_CARD_RESET,
|
|
&card->work_flags))
|
|
mwifiex_pcie_card_reset_work(card->adapter);
|
|
}
|
|
|
|
/* This function dumps FW information */
|
|
static void mwifiex_pcie_device_dump(struct mwifiex_adapter *adapter)
|
|
{
|
|
struct pcie_service_card *card = adapter->card;
|
|
|
|
if (!test_and_set_bit(MWIFIEX_IFACE_WORK_DEVICE_DUMP,
|
|
&card->work_flags))
|
|
schedule_work(&card->work);
|
|
}
|
|
|
|
static void mwifiex_pcie_card_reset(struct mwifiex_adapter *adapter)
|
|
{
|
|
struct pcie_service_card *card = adapter->card;
|
|
|
|
if (!test_and_set_bit(MWIFIEX_IFACE_WORK_CARD_RESET, &card->work_flags))
|
|
schedule_work(&card->work);
|
|
}
|
|
|
|
static int mwifiex_pcie_alloc_buffers(struct mwifiex_adapter *adapter)
|
|
{
|
|
struct pcie_service_card *card = adapter->card;
|
|
const struct mwifiex_pcie_card_reg *reg = card->pcie.reg;
|
|
int ret;
|
|
|
|
card->cmdrsp_buf = NULL;
|
|
ret = mwifiex_pcie_create_txbd_ring(adapter);
|
|
if (ret) {
|
|
mwifiex_dbg(adapter, ERROR, "Failed to create txbd ring\n");
|
|
goto err_cre_txbd;
|
|
}
|
|
|
|
ret = mwifiex_pcie_create_rxbd_ring(adapter);
|
|
if (ret) {
|
|
mwifiex_dbg(adapter, ERROR, "Failed to create rxbd ring\n");
|
|
goto err_cre_rxbd;
|
|
}
|
|
|
|
ret = mwifiex_pcie_create_evtbd_ring(adapter);
|
|
if (ret) {
|
|
mwifiex_dbg(adapter, ERROR, "Failed to create evtbd ring\n");
|
|
goto err_cre_evtbd;
|
|
}
|
|
|
|
ret = mwifiex_pcie_alloc_cmdrsp_buf(adapter);
|
|
if (ret) {
|
|
mwifiex_dbg(adapter, ERROR, "Failed to allocate cmdbuf buffer\n");
|
|
goto err_alloc_cmdbuf;
|
|
}
|
|
|
|
if (reg->sleep_cookie) {
|
|
ret = mwifiex_pcie_alloc_sleep_cookie_buf(adapter);
|
|
if (ret) {
|
|
mwifiex_dbg(adapter, ERROR, "Failed to allocate sleep_cookie buffer\n");
|
|
goto err_alloc_cookie;
|
|
}
|
|
} else {
|
|
card->sleep_cookie_vbase = NULL;
|
|
}
|
|
|
|
return 0;
|
|
|
|
err_alloc_cookie:
|
|
mwifiex_pcie_delete_cmdrsp_buf(adapter);
|
|
err_alloc_cmdbuf:
|
|
mwifiex_pcie_delete_evtbd_ring(adapter);
|
|
err_cre_evtbd:
|
|
mwifiex_pcie_delete_rxbd_ring(adapter);
|
|
err_cre_rxbd:
|
|
mwifiex_pcie_delete_txbd_ring(adapter);
|
|
err_cre_txbd:
|
|
return ret;
|
|
}
|
|
|
|
static void mwifiex_pcie_free_buffers(struct mwifiex_adapter *adapter)
|
|
{
|
|
struct pcie_service_card *card = adapter->card;
|
|
const struct mwifiex_pcie_card_reg *reg = card->pcie.reg;
|
|
|
|
if (reg->sleep_cookie)
|
|
mwifiex_pcie_delete_sleep_cookie_buf(adapter);
|
|
|
|
mwifiex_pcie_delete_cmdrsp_buf(adapter);
|
|
mwifiex_pcie_delete_evtbd_ring(adapter);
|
|
mwifiex_pcie_delete_rxbd_ring(adapter);
|
|
mwifiex_pcie_delete_txbd_ring(adapter);
|
|
}
|
|
|
|
/*
|
|
* This function initializes the PCI-E host memory space, WCB rings, etc.
|
|
*/
|
|
static int mwifiex_init_pcie(struct mwifiex_adapter *adapter)
|
|
{
|
|
struct pcie_service_card *card = adapter->card;
|
|
int ret;
|
|
struct pci_dev *pdev = card->dev;
|
|
|
|
pci_set_drvdata(pdev, card);
|
|
|
|
ret = pci_enable_device(pdev);
|
|
if (ret)
|
|
goto err_enable_dev;
|
|
|
|
pci_set_master(pdev);
|
|
|
|
ret = dma_set_mask_and_coherent(&pdev->dev, DMA_BIT_MASK(32));
|
|
if (ret) {
|
|
pr_err("dma_set_mask(32) failed: %d\n", ret);
|
|
goto err_set_dma_mask;
|
|
}
|
|
|
|
ret = pci_request_region(pdev, 0, DRV_NAME);
|
|
if (ret) {
|
|
pr_err("req_reg(0) error\n");
|
|
goto err_req_region0;
|
|
}
|
|
card->pci_mmap = pci_iomap(pdev, 0, 0);
|
|
if (!card->pci_mmap) {
|
|
pr_err("iomap(0) error\n");
|
|
ret = -EIO;
|
|
goto err_iomap0;
|
|
}
|
|
ret = pci_request_region(pdev, 2, DRV_NAME);
|
|
if (ret) {
|
|
pr_err("req_reg(2) error\n");
|
|
goto err_req_region2;
|
|
}
|
|
card->pci_mmap1 = pci_iomap(pdev, 2, 0);
|
|
if (!card->pci_mmap1) {
|
|
pr_err("iomap(2) error\n");
|
|
ret = -EIO;
|
|
goto err_iomap2;
|
|
}
|
|
|
|
pr_notice("PCI memory map Virt0: %pK PCI memory map Virt2: %pK\n",
|
|
card->pci_mmap, card->pci_mmap1);
|
|
|
|
ret = mwifiex_pcie_alloc_buffers(adapter);
|
|
if (ret)
|
|
goto err_alloc_buffers;
|
|
|
|
if (pdev->device == PCIE_DEVICE_ID_MARVELL_88W8897)
|
|
adapter->ignore_btcoex_events = true;
|
|
|
|
return 0;
|
|
|
|
err_alloc_buffers:
|
|
pci_iounmap(pdev, card->pci_mmap1);
|
|
err_iomap2:
|
|
pci_release_region(pdev, 2);
|
|
err_req_region2:
|
|
pci_iounmap(pdev, card->pci_mmap);
|
|
err_iomap0:
|
|
pci_release_region(pdev, 0);
|
|
err_req_region0:
|
|
err_set_dma_mask:
|
|
pci_disable_device(pdev);
|
|
err_enable_dev:
|
|
return ret;
|
|
}
|
|
|
|
/*
|
|
* This function cleans up the allocated card buffers.
|
|
*/
|
|
static void mwifiex_cleanup_pcie(struct mwifiex_adapter *adapter)
|
|
{
|
|
struct pcie_service_card *card = adapter->card;
|
|
struct pci_dev *pdev = card->dev;
|
|
const struct mwifiex_pcie_card_reg *reg = card->pcie.reg;
|
|
u32 fw_status;
|
|
|
|
/* Perform the cancel_work_sync() only when we're not resetting
|
|
* the card. It's because that function never returns if we're
|
|
* in reset path. If we're here when resetting the card, it means
|
|
* that we failed to reset the card (reset failure path).
|
|
*/
|
|
if (!card->pci_reset_ongoing) {
|
|
mwifiex_dbg(adapter, MSG, "performing cancel_work_sync()...\n");
|
|
cancel_work_sync(&card->work);
|
|
mwifiex_dbg(adapter, MSG, "cancel_work_sync() done\n");
|
|
} else {
|
|
mwifiex_dbg(adapter, MSG,
|
|
"skipped cancel_work_sync() because we're in card reset failure path\n");
|
|
}
|
|
|
|
mwifiex_read_reg(adapter, reg->fw_status, &fw_status);
|
|
if (fw_status == FIRMWARE_READY_PCIE) {
|
|
mwifiex_dbg(adapter, INFO,
|
|
"Clearing driver ready signature\n");
|
|
if (mwifiex_write_reg(adapter, reg->drv_rdy, 0x00000000))
|
|
mwifiex_dbg(adapter, ERROR,
|
|
"Failed to write driver not-ready signature\n");
|
|
}
|
|
|
|
pci_disable_device(pdev);
|
|
|
|
pci_iounmap(pdev, card->pci_mmap);
|
|
pci_iounmap(pdev, card->pci_mmap1);
|
|
pci_release_region(pdev, 2);
|
|
pci_release_region(pdev, 0);
|
|
|
|
mwifiex_pcie_free_buffers(adapter);
|
|
}
|
|
|
|
static int mwifiex_pcie_request_irq(struct mwifiex_adapter *adapter)
|
|
{
|
|
int ret, i, j;
|
|
struct pcie_service_card *card = adapter->card;
|
|
struct pci_dev *pdev = card->dev;
|
|
|
|
if (card->pcie.reg->msix_support) {
|
|
for (i = 0; i < MWIFIEX_NUM_MSIX_VECTORS; i++)
|
|
card->msix_entries[i].entry = i;
|
|
ret = pci_enable_msix_exact(pdev, card->msix_entries,
|
|
MWIFIEX_NUM_MSIX_VECTORS);
|
|
if (!ret) {
|
|
for (i = 0; i < MWIFIEX_NUM_MSIX_VECTORS; i++) {
|
|
card->msix_ctx[i].dev = pdev;
|
|
card->msix_ctx[i].msg_id = i;
|
|
|
|
ret = request_irq(card->msix_entries[i].vector,
|
|
mwifiex_pcie_interrupt, 0,
|
|
"MWIFIEX_PCIE_MSIX",
|
|
&card->msix_ctx[i]);
|
|
if (ret)
|
|
break;
|
|
}
|
|
|
|
if (ret) {
|
|
mwifiex_dbg(adapter, INFO, "request_irq fail: %d\n",
|
|
ret);
|
|
for (j = 0; j < i; j++)
|
|
free_irq(card->msix_entries[j].vector,
|
|
&card->msix_ctx[i]);
|
|
pci_disable_msix(pdev);
|
|
} else {
|
|
mwifiex_dbg(adapter, MSG, "MSIx enabled!");
|
|
card->msix_enable = 1;
|
|
return 0;
|
|
}
|
|
}
|
|
}
|
|
|
|
if (pci_enable_msi(pdev) != 0)
|
|
pci_disable_msi(pdev);
|
|
else
|
|
card->msi_enable = 1;
|
|
|
|
mwifiex_dbg(adapter, INFO, "msi_enable = %d\n", card->msi_enable);
|
|
|
|
card->share_irq_ctx.dev = pdev;
|
|
card->share_irq_ctx.msg_id = -1;
|
|
ret = request_irq(pdev->irq, mwifiex_pcie_interrupt, IRQF_SHARED,
|
|
"MRVL_PCIE", &card->share_irq_ctx);
|
|
if (ret) {
|
|
pr_err("request_irq failed: ret=%d\n", ret);
|
|
return -1;
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
/*
|
|
* This function gets the firmware name for downloading by revision id
|
|
*
|
|
* Read revision id register to get revision id
|
|
*/
|
|
static void mwifiex_pcie_get_fw_name(struct mwifiex_adapter *adapter)
|
|
{
|
|
int revision_id = 0;
|
|
int version, magic;
|
|
struct pcie_service_card *card = adapter->card;
|
|
|
|
switch (card->dev->device) {
|
|
case PCIE_DEVICE_ID_MARVELL_88W8766P:
|
|
strcpy(adapter->fw_name, PCIE8766_DEFAULT_FW_NAME);
|
|
break;
|
|
case PCIE_DEVICE_ID_MARVELL_88W8897:
|
|
mwifiex_write_reg(adapter, 0x0c58, 0x80c00000);
|
|
mwifiex_read_reg(adapter, 0x0c58, &revision_id);
|
|
revision_id &= 0xff00;
|
|
switch (revision_id) {
|
|
case PCIE8897_A0:
|
|
strcpy(adapter->fw_name, PCIE8897_A0_FW_NAME);
|
|
break;
|
|
case PCIE8897_B0:
|
|
strcpy(adapter->fw_name, PCIE8897_B0_FW_NAME);
|
|
break;
|
|
default:
|
|
strcpy(adapter->fw_name, PCIE8897_DEFAULT_FW_NAME);
|
|
|
|
break;
|
|
}
|
|
break;
|
|
case PCIE_DEVICE_ID_MARVELL_88W8997:
|
|
mwifiex_read_reg(adapter, 0x8, &revision_id);
|
|
mwifiex_read_reg(adapter, 0x0cd0, &version);
|
|
mwifiex_read_reg(adapter, 0x0cd4, &magic);
|
|
revision_id &= 0xff;
|
|
version &= 0x7;
|
|
magic &= 0xff;
|
|
if (revision_id == PCIE8997_A1 &&
|
|
magic == CHIP_MAGIC_VALUE &&
|
|
version == CHIP_VER_PCIEUART)
|
|
strcpy(adapter->fw_name, PCIEUART8997_FW_NAME_V4);
|
|
else
|
|
strcpy(adapter->fw_name, PCIEUSB8997_FW_NAME_V4);
|
|
break;
|
|
default:
|
|
break;
|
|
}
|
|
}
|
|
|
|
/*
|
|
* This function registers the PCIE device.
|
|
*
|
|
* PCIE IRQ is claimed, block size is set and driver data is initialized.
|
|
*/
|
|
static int mwifiex_register_dev(struct mwifiex_adapter *adapter)
|
|
{
|
|
struct pcie_service_card *card = adapter->card;
|
|
|
|
/* save adapter pointer in card */
|
|
card->adapter = adapter;
|
|
|
|
if (mwifiex_pcie_request_irq(adapter))
|
|
return -1;
|
|
|
|
adapter->tx_buf_size = card->pcie.tx_buf_size;
|
|
adapter->mem_type_mapping_tbl = card->pcie.mem_type_mapping_tbl;
|
|
adapter->num_mem_types = card->pcie.num_mem_types;
|
|
adapter->ext_scan = card->pcie.can_ext_scan;
|
|
mwifiex_pcie_get_fw_name(adapter);
|
|
|
|
return 0;
|
|
}
|
|
|
|
/*
|
|
* This function unregisters the PCIE device.
|
|
*
|
|
* The PCIE IRQ is released, the function is disabled and driver
|
|
* data is set to null.
|
|
*/
|
|
static void mwifiex_unregister_dev(struct mwifiex_adapter *adapter)
|
|
{
|
|
struct pcie_service_card *card = adapter->card;
|
|
struct pci_dev *pdev = card->dev;
|
|
int i;
|
|
|
|
if (card->msix_enable) {
|
|
for (i = 0; i < MWIFIEX_NUM_MSIX_VECTORS; i++)
|
|
synchronize_irq(card->msix_entries[i].vector);
|
|
|
|
for (i = 0; i < MWIFIEX_NUM_MSIX_VECTORS; i++)
|
|
free_irq(card->msix_entries[i].vector,
|
|
&card->msix_ctx[i]);
|
|
|
|
card->msix_enable = 0;
|
|
pci_disable_msix(pdev);
|
|
} else {
|
|
mwifiex_dbg(adapter, INFO,
|
|
"%s(): calling free_irq()\n", __func__);
|
|
free_irq(card->dev->irq, &card->share_irq_ctx);
|
|
|
|
if (card->msi_enable)
|
|
pci_disable_msi(pdev);
|
|
}
|
|
card->adapter = NULL;
|
|
}
|
|
|
|
/*
|
|
* This function initializes the PCI-E host memory space, WCB rings, etc.,
|
|
* similar to mwifiex_init_pcie(), but without resetting PCI-E state.
|
|
*/
|
|
static void mwifiex_pcie_up_dev(struct mwifiex_adapter *adapter)
|
|
{
|
|
struct pcie_service_card *card = adapter->card;
|
|
struct pci_dev *pdev = card->dev;
|
|
|
|
/* tx_buf_size might be changed to 3584 by firmware during
|
|
* data transfer, we should reset it to default size.
|
|
*/
|
|
adapter->tx_buf_size = card->pcie.tx_buf_size;
|
|
|
|
mwifiex_pcie_alloc_buffers(adapter);
|
|
|
|
pci_set_master(pdev);
|
|
}
|
|
|
|
/* This function cleans up the PCI-E host memory space. */
|
|
static void mwifiex_pcie_down_dev(struct mwifiex_adapter *adapter)
|
|
{
|
|
struct pcie_service_card *card = adapter->card;
|
|
const struct mwifiex_pcie_card_reg *reg = card->pcie.reg;
|
|
struct pci_dev *pdev = card->dev;
|
|
|
|
if (mwifiex_write_reg(adapter, reg->drv_rdy, 0x00000000))
|
|
mwifiex_dbg(adapter, ERROR, "Failed to write driver not-ready signature\n");
|
|
|
|
pci_clear_master(pdev);
|
|
|
|
adapter->seq_num = 0;
|
|
|
|
mwifiex_pcie_free_buffers(adapter);
|
|
}
|
|
|
|
static struct mwifiex_if_ops pcie_ops = {
|
|
.init_if = mwifiex_init_pcie,
|
|
.cleanup_if = mwifiex_cleanup_pcie,
|
|
.check_fw_status = mwifiex_check_fw_status,
|
|
.check_winner_status = mwifiex_check_winner_status,
|
|
.prog_fw = mwifiex_prog_fw_w_helper,
|
|
.register_dev = mwifiex_register_dev,
|
|
.unregister_dev = mwifiex_unregister_dev,
|
|
.enable_int = mwifiex_pcie_enable_host_int,
|
|
.disable_int = mwifiex_pcie_disable_host_int_noerr,
|
|
.process_int_status = mwifiex_process_int_status,
|
|
.host_to_card = mwifiex_pcie_host_to_card,
|
|
.wakeup = mwifiex_pm_wakeup_card,
|
|
.wakeup_complete = mwifiex_pm_wakeup_card_complete,
|
|
|
|
/* PCIE specific */
|
|
.cmdrsp_complete = mwifiex_pcie_cmdrsp_complete,
|
|
.event_complete = mwifiex_pcie_event_complete,
|
|
.update_mp_end_port = NULL,
|
|
.cleanup_mpa_buf = NULL,
|
|
.init_fw_port = mwifiex_pcie_init_fw_port,
|
|
.clean_pcie_ring = mwifiex_clean_pcie_ring_buf,
|
|
.card_reset = mwifiex_pcie_card_reset,
|
|
.reg_dump = mwifiex_pcie_reg_dump,
|
|
.device_dump = mwifiex_pcie_device_dump,
|
|
.down_dev = mwifiex_pcie_down_dev,
|
|
.up_dev = mwifiex_pcie_up_dev,
|
|
};
|
|
|
|
module_pci_driver(mwifiex_pcie);
|
|
|
|
MODULE_AUTHOR("Marvell International Ltd.");
|
|
MODULE_DESCRIPTION("Marvell WiFi-Ex PCI-Express Driver version " PCIE_VERSION);
|
|
MODULE_VERSION(PCIE_VERSION);
|
|
MODULE_LICENSE("GPL v2");
|