linuxdebug/drivers/gpio/gpio-realtek-otto.c

460 lines
13 KiB
C

// SPDX-License-Identifier: GPL-2.0-only
#include <linux/gpio/driver.h>
#include <linux/cpumask.h>
#include <linux/irq.h>
#include <linux/minmax.h>
#include <linux/mod_devicetable.h>
#include <linux/module.h>
#include <linux/platform_device.h>
#include <linux/property.h>
/*
* Total register block size is 0x1C for one bank of four ports (A, B, C, D).
* An optional second bank, with ports E, F, G, and H, may be present, starting
* at register offset 0x1C.
*/
/*
* Pin select: (0) "normal", (1) "dedicate peripheral"
* Not used on RTL8380/RTL8390, peripheral selection is managed by control bits
* in the peripheral registers.
*/
#define REALTEK_GPIO_REG_CNR 0x00
/* Clear bit (0) for input, set bit (1) for output */
#define REALTEK_GPIO_REG_DIR 0x08
#define REALTEK_GPIO_REG_DATA 0x0C
/* Read bit for IRQ status, write 1 to clear IRQ */
#define REALTEK_GPIO_REG_ISR 0x10
/* Two bits per GPIO in IMR registers */
#define REALTEK_GPIO_REG_IMR 0x14
#define REALTEK_GPIO_REG_IMR_AB 0x14
#define REALTEK_GPIO_REG_IMR_CD 0x18
#define REALTEK_GPIO_IMR_LINE_MASK GENMASK(1, 0)
#define REALTEK_GPIO_IRQ_EDGE_FALLING 1
#define REALTEK_GPIO_IRQ_EDGE_RISING 2
#define REALTEK_GPIO_IRQ_EDGE_BOTH 3
#define REALTEK_GPIO_MAX 32
#define REALTEK_GPIO_PORTS_PER_BANK 4
/**
* realtek_gpio_ctrl - Realtek Otto GPIO driver data
*
* @gc: Associated gpio_chip instance
* @base: Base address of the register block for a GPIO bank
* @lock: Lock for accessing the IRQ registers and values
* @intr_mask: Mask for interrupts lines
* @intr_type: Interrupt type selection
* @bank_read: Read a bank setting as a single 32-bit value
* @bank_write: Write a bank setting as a single 32-bit value
* @imr_line_pos: Bit shift of an IRQ line's IMR value.
*
* The DIR, DATA, and ISR registers consist of four 8-bit port values, packed
* into a single 32-bit register. Use @bank_read (@bank_write) to get (assign)
* a value from (to) these registers. The IMR register consists of four 16-bit
* port values, packed into two 32-bit registers. Use @imr_line_pos to get the
* bit shift of the 2-bit field for a line's IMR settings. Shifts larger than
* 32 overflow into the second register.
*
* Because the interrupt mask register (IMR) combines the function of IRQ type
* selection and masking, two extra values are stored. @intr_mask is used to
* mask/unmask the interrupts for a GPIO line, and @intr_type is used to store
* the selected interrupt types. The logical AND of these values is written to
* IMR on changes.
*/
struct realtek_gpio_ctrl {
struct gpio_chip gc;
void __iomem *base;
void __iomem *cpumask_base;
struct cpumask cpu_irq_maskable;
raw_spinlock_t lock;
u8 intr_mask[REALTEK_GPIO_MAX];
u8 intr_type[REALTEK_GPIO_MAX];
u32 (*bank_read)(void __iomem *reg);
void (*bank_write)(void __iomem *reg, u32 value);
unsigned int (*line_imr_pos)(unsigned int line);
};
/* Expand with more flags as devices with other quirks are added */
enum realtek_gpio_flags {
/*
* Allow disabling interrupts, for cases where the port order is
* unknown. This may result in a port mismatch between ISR and IMR.
* An interrupt would appear to come from a different line than the
* line the IRQ handler was assigned to, causing uncaught interrupts.
*/
GPIO_INTERRUPTS_DISABLED = BIT(0),
/*
* Port order is reversed, meaning DCBA register layout for 1-bit
* fields, and [BA, DC] for 2-bit fields.
*/
GPIO_PORTS_REVERSED = BIT(1),
/*
* Interrupts can be enabled per cpu. This requires a secondary IO
* range, where the per-cpu enable masks are located.
*/
GPIO_INTERRUPTS_PER_CPU = BIT(2),
};
static struct realtek_gpio_ctrl *irq_data_to_ctrl(struct irq_data *data)
{
struct gpio_chip *gc = irq_data_get_irq_chip_data(data);
return container_of(gc, struct realtek_gpio_ctrl, gc);
}
/*
* Normal port order register access
*
* Port information is stored with the first port at offset 0, followed by the
* second, etc. Most registers store one bit per GPIO and use a u8 value per
* port. The two interrupt mask registers store two bits per GPIO, so use u16
* values.
*/
static u32 realtek_gpio_bank_read_swapped(void __iomem *reg)
{
return ioread32be(reg);
}
static void realtek_gpio_bank_write_swapped(void __iomem *reg, u32 value)
{
iowrite32be(value, reg);
}
static unsigned int realtek_gpio_line_imr_pos_swapped(unsigned int line)
{
unsigned int port_pin = line % 8;
unsigned int port = line / 8;
return 2 * (8 * (port ^ 1) + port_pin);
}
/*
* Reversed port order register access
*
* For registers with one bit per GPIO, all ports are stored as u8-s in one
* register in reversed order. The two interrupt mask registers store two bits
* per GPIO, so use u16 values. The first register contains ports 1 and 0, the
* second ports 3 and 2.
*/
static u32 realtek_gpio_bank_read(void __iomem *reg)
{
return ioread32(reg);
}
static void realtek_gpio_bank_write(void __iomem *reg, u32 value)
{
iowrite32(value, reg);
}
static unsigned int realtek_gpio_line_imr_pos(unsigned int line)
{
return 2 * line;
}
static void realtek_gpio_clear_isr(struct realtek_gpio_ctrl *ctrl, u32 mask)
{
ctrl->bank_write(ctrl->base + REALTEK_GPIO_REG_ISR, mask);
}
static u32 realtek_gpio_read_isr(struct realtek_gpio_ctrl *ctrl)
{
return ctrl->bank_read(ctrl->base + REALTEK_GPIO_REG_ISR);
}
/* Set the rising and falling edge mask bits for a GPIO pin */
static void realtek_gpio_update_line_imr(struct realtek_gpio_ctrl *ctrl, unsigned int line)
{
void __iomem *reg = ctrl->base + REALTEK_GPIO_REG_IMR;
unsigned int line_shift = ctrl->line_imr_pos(line);
unsigned int shift = line_shift % 32;
u32 irq_type = ctrl->intr_type[line];
u32 irq_mask = ctrl->intr_mask[line];
u32 reg_val;
reg += 4 * (line_shift / 32);
reg_val = ioread32(reg);
reg_val &= ~(REALTEK_GPIO_IMR_LINE_MASK << shift);
reg_val |= (irq_type & irq_mask & REALTEK_GPIO_IMR_LINE_MASK) << shift;
iowrite32(reg_val, reg);
}
static void realtek_gpio_irq_ack(struct irq_data *data)
{
struct realtek_gpio_ctrl *ctrl = irq_data_to_ctrl(data);
irq_hw_number_t line = irqd_to_hwirq(data);
realtek_gpio_clear_isr(ctrl, BIT(line));
}
static void realtek_gpio_irq_unmask(struct irq_data *data)
{
struct realtek_gpio_ctrl *ctrl = irq_data_to_ctrl(data);
unsigned int line = irqd_to_hwirq(data);
unsigned long flags;
gpiochip_enable_irq(&ctrl->gc, line);
raw_spin_lock_irqsave(&ctrl->lock, flags);
ctrl->intr_mask[line] = REALTEK_GPIO_IMR_LINE_MASK;
realtek_gpio_update_line_imr(ctrl, line);
raw_spin_unlock_irqrestore(&ctrl->lock, flags);
}
static void realtek_gpio_irq_mask(struct irq_data *data)
{
struct realtek_gpio_ctrl *ctrl = irq_data_to_ctrl(data);
unsigned int line = irqd_to_hwirq(data);
unsigned long flags;
raw_spin_lock_irqsave(&ctrl->lock, flags);
ctrl->intr_mask[line] = 0;
realtek_gpio_update_line_imr(ctrl, line);
raw_spin_unlock_irqrestore(&ctrl->lock, flags);
gpiochip_disable_irq(&ctrl->gc, line);
}
static int realtek_gpio_irq_set_type(struct irq_data *data, unsigned int flow_type)
{
struct realtek_gpio_ctrl *ctrl = irq_data_to_ctrl(data);
unsigned int line = irqd_to_hwirq(data);
unsigned long flags;
u8 type;
switch (flow_type & IRQ_TYPE_SENSE_MASK) {
case IRQ_TYPE_EDGE_FALLING:
type = REALTEK_GPIO_IRQ_EDGE_FALLING;
break;
case IRQ_TYPE_EDGE_RISING:
type = REALTEK_GPIO_IRQ_EDGE_RISING;
break;
case IRQ_TYPE_EDGE_BOTH:
type = REALTEK_GPIO_IRQ_EDGE_BOTH;
break;
default:
return -EINVAL;
}
irq_set_handler_locked(data, handle_edge_irq);
raw_spin_lock_irqsave(&ctrl->lock, flags);
ctrl->intr_type[line] = type;
realtek_gpio_update_line_imr(ctrl, line);
raw_spin_unlock_irqrestore(&ctrl->lock, flags);
return 0;
}
static void realtek_gpio_irq_handler(struct irq_desc *desc)
{
struct gpio_chip *gc = irq_desc_get_handler_data(desc);
struct realtek_gpio_ctrl *ctrl = gpiochip_get_data(gc);
struct irq_chip *irq_chip = irq_desc_get_chip(desc);
unsigned long status;
int offset;
chained_irq_enter(irq_chip, desc);
status = realtek_gpio_read_isr(ctrl);
for_each_set_bit(offset, &status, gc->ngpio)
generic_handle_domain_irq(gc->irq.domain, offset);
chained_irq_exit(irq_chip, desc);
}
static inline void __iomem *realtek_gpio_irq_cpu_mask(struct realtek_gpio_ctrl *ctrl, int cpu)
{
return ctrl->cpumask_base + REALTEK_GPIO_PORTS_PER_BANK * cpu;
}
static int realtek_gpio_irq_set_affinity(struct irq_data *data,
const struct cpumask *dest, bool force)
{
struct realtek_gpio_ctrl *ctrl = irq_data_to_ctrl(data);
unsigned int line = irqd_to_hwirq(data);
void __iomem *irq_cpu_mask;
unsigned long flags;
int cpu;
u32 v;
if (!ctrl->cpumask_base)
return -ENXIO;
raw_spin_lock_irqsave(&ctrl->lock, flags);
for_each_cpu(cpu, &ctrl->cpu_irq_maskable) {
irq_cpu_mask = realtek_gpio_irq_cpu_mask(ctrl, cpu);
v = ctrl->bank_read(irq_cpu_mask);
if (cpumask_test_cpu(cpu, dest))
v |= BIT(line);
else
v &= ~BIT(line);
ctrl->bank_write(irq_cpu_mask, v);
}
raw_spin_unlock_irqrestore(&ctrl->lock, flags);
irq_data_update_effective_affinity(data, dest);
return 0;
}
static int realtek_gpio_irq_init(struct gpio_chip *gc)
{
struct realtek_gpio_ctrl *ctrl = gpiochip_get_data(gc);
u32 mask_all = GENMASK(gc->ngpio - 1, 0);
unsigned int line;
int cpu;
for (line = 0; line < gc->ngpio; line++)
realtek_gpio_update_line_imr(ctrl, line);
realtek_gpio_clear_isr(ctrl, mask_all);
for_each_cpu(cpu, &ctrl->cpu_irq_maskable)
ctrl->bank_write(realtek_gpio_irq_cpu_mask(ctrl, cpu), mask_all);
return 0;
}
static const struct irq_chip realtek_gpio_irq_chip = {
.name = "realtek-otto-gpio",
.irq_ack = realtek_gpio_irq_ack,
.irq_mask = realtek_gpio_irq_mask,
.irq_unmask = realtek_gpio_irq_unmask,
.irq_set_type = realtek_gpio_irq_set_type,
.irq_set_affinity = realtek_gpio_irq_set_affinity,
.flags = IRQCHIP_IMMUTABLE,
GPIOCHIP_IRQ_RESOURCE_HELPERS,
};
static const struct of_device_id realtek_gpio_of_match[] = {
{
.compatible = "realtek,otto-gpio",
.data = (void *)GPIO_INTERRUPTS_DISABLED,
},
{
.compatible = "realtek,rtl8380-gpio",
},
{
.compatible = "realtek,rtl8390-gpio",
},
{
.compatible = "realtek,rtl9300-gpio",
.data = (void *)(GPIO_PORTS_REVERSED | GPIO_INTERRUPTS_PER_CPU)
},
{
.compatible = "realtek,rtl9310-gpio",
},
{}
};
MODULE_DEVICE_TABLE(of, realtek_gpio_of_match);
static int realtek_gpio_probe(struct platform_device *pdev)
{
struct device *dev = &pdev->dev;
unsigned long bgpio_flags;
unsigned int dev_flags;
struct gpio_irq_chip *girq;
struct realtek_gpio_ctrl *ctrl;
struct resource *res;
u32 ngpios;
unsigned int nr_cpus;
int cpu, err, irq;
ctrl = devm_kzalloc(dev, sizeof(*ctrl), GFP_KERNEL);
if (!ctrl)
return -ENOMEM;
dev_flags = (unsigned int) device_get_match_data(dev);
ngpios = REALTEK_GPIO_MAX;
device_property_read_u32(dev, "ngpios", &ngpios);
if (ngpios > REALTEK_GPIO_MAX) {
dev_err(&pdev->dev, "invalid ngpios (max. %d)\n",
REALTEK_GPIO_MAX);
return -EINVAL;
}
ctrl->base = devm_platform_ioremap_resource(pdev, 0);
if (IS_ERR(ctrl->base))
return PTR_ERR(ctrl->base);
raw_spin_lock_init(&ctrl->lock);
if (dev_flags & GPIO_PORTS_REVERSED) {
bgpio_flags = 0;
ctrl->bank_read = realtek_gpio_bank_read;
ctrl->bank_write = realtek_gpio_bank_write;
ctrl->line_imr_pos = realtek_gpio_line_imr_pos;
} else {
bgpio_flags = BGPIOF_BIG_ENDIAN_BYTE_ORDER;
ctrl->bank_read = realtek_gpio_bank_read_swapped;
ctrl->bank_write = realtek_gpio_bank_write_swapped;
ctrl->line_imr_pos = realtek_gpio_line_imr_pos_swapped;
}
err = bgpio_init(&ctrl->gc, dev, 4,
ctrl->base + REALTEK_GPIO_REG_DATA, NULL, NULL,
ctrl->base + REALTEK_GPIO_REG_DIR, NULL,
bgpio_flags);
if (err) {
dev_err(dev, "unable to init generic GPIO");
return err;
}
ctrl->gc.ngpio = ngpios;
ctrl->gc.owner = THIS_MODULE;
irq = platform_get_irq_optional(pdev, 0);
if (!(dev_flags & GPIO_INTERRUPTS_DISABLED) && irq > 0) {
girq = &ctrl->gc.irq;
gpio_irq_chip_set_chip(girq, &realtek_gpio_irq_chip);
girq->default_type = IRQ_TYPE_NONE;
girq->handler = handle_bad_irq;
girq->parent_handler = realtek_gpio_irq_handler;
girq->num_parents = 1;
girq->parents = devm_kcalloc(dev, girq->num_parents,
sizeof(*girq->parents), GFP_KERNEL);
if (!girq->parents)
return -ENOMEM;
girq->parents[0] = irq;
girq->init_hw = realtek_gpio_irq_init;
}
cpumask_clear(&ctrl->cpu_irq_maskable);
if ((dev_flags & GPIO_INTERRUPTS_PER_CPU) && irq > 0) {
ctrl->cpumask_base = devm_platform_get_and_ioremap_resource(pdev, 1, &res);
if (IS_ERR(ctrl->cpumask_base))
return dev_err_probe(dev, PTR_ERR(ctrl->cpumask_base),
"missing CPU IRQ mask registers");
nr_cpus = resource_size(res) / REALTEK_GPIO_PORTS_PER_BANK;
nr_cpus = min(nr_cpus, num_present_cpus());
for (cpu = 0; cpu < nr_cpus; cpu++)
cpumask_set_cpu(cpu, &ctrl->cpu_irq_maskable);
}
return devm_gpiochip_add_data(dev, &ctrl->gc, ctrl);
}
static struct platform_driver realtek_gpio_driver = {
.driver = {
.name = "realtek-otto-gpio",
.of_match_table = realtek_gpio_of_match,
},
.probe = realtek_gpio_probe,
};
module_platform_driver(realtek_gpio_driver);
MODULE_DESCRIPTION("Realtek Otto GPIO support");
MODULE_AUTHOR("Sander Vanheule <sander@svanheule.net>");
MODULE_LICENSE("GPL v2");