2383 lines
63 KiB
C
2383 lines
63 KiB
C
// SPDX-License-Identifier: GPL-2.0+
|
|
//
|
|
// drivers/dma/imx-sdma.c
|
|
//
|
|
// This file contains a driver for the Freescale Smart DMA engine
|
|
//
|
|
// Copyright 2010 Sascha Hauer, Pengutronix <s.hauer@pengutronix.de>
|
|
//
|
|
// Based on code from Freescale:
|
|
//
|
|
// Copyright 2004-2009 Freescale Semiconductor, Inc. All Rights Reserved.
|
|
|
|
#include <linux/init.h>
|
|
#include <linux/iopoll.h>
|
|
#include <linux/module.h>
|
|
#include <linux/types.h>
|
|
#include <linux/bitfield.h>
|
|
#include <linux/bitops.h>
|
|
#include <linux/mm.h>
|
|
#include <linux/interrupt.h>
|
|
#include <linux/clk.h>
|
|
#include <linux/delay.h>
|
|
#include <linux/sched.h>
|
|
#include <linux/semaphore.h>
|
|
#include <linux/spinlock.h>
|
|
#include <linux/device.h>
|
|
#include <linux/dma-mapping.h>
|
|
#include <linux/firmware.h>
|
|
#include <linux/slab.h>
|
|
#include <linux/platform_device.h>
|
|
#include <linux/dmaengine.h>
|
|
#include <linux/of.h>
|
|
#include <linux/of_address.h>
|
|
#include <linux/of_device.h>
|
|
#include <linux/of_dma.h>
|
|
#include <linux/workqueue.h>
|
|
|
|
#include <asm/irq.h>
|
|
#include <linux/dma/imx-dma.h>
|
|
#include <linux/regmap.h>
|
|
#include <linux/mfd/syscon.h>
|
|
#include <linux/mfd/syscon/imx6q-iomuxc-gpr.h>
|
|
|
|
#include "dmaengine.h"
|
|
#include "virt-dma.h"
|
|
|
|
/* SDMA registers */
|
|
#define SDMA_H_C0PTR 0x000
|
|
#define SDMA_H_INTR 0x004
|
|
#define SDMA_H_STATSTOP 0x008
|
|
#define SDMA_H_START 0x00c
|
|
#define SDMA_H_EVTOVR 0x010
|
|
#define SDMA_H_DSPOVR 0x014
|
|
#define SDMA_H_HOSTOVR 0x018
|
|
#define SDMA_H_EVTPEND 0x01c
|
|
#define SDMA_H_DSPENBL 0x020
|
|
#define SDMA_H_RESET 0x024
|
|
#define SDMA_H_EVTERR 0x028
|
|
#define SDMA_H_INTRMSK 0x02c
|
|
#define SDMA_H_PSW 0x030
|
|
#define SDMA_H_EVTERRDBG 0x034
|
|
#define SDMA_H_CONFIG 0x038
|
|
#define SDMA_ONCE_ENB 0x040
|
|
#define SDMA_ONCE_DATA 0x044
|
|
#define SDMA_ONCE_INSTR 0x048
|
|
#define SDMA_ONCE_STAT 0x04c
|
|
#define SDMA_ONCE_CMD 0x050
|
|
#define SDMA_EVT_MIRROR 0x054
|
|
#define SDMA_ILLINSTADDR 0x058
|
|
#define SDMA_CHN0ADDR 0x05c
|
|
#define SDMA_ONCE_RTB 0x060
|
|
#define SDMA_XTRIG_CONF1 0x070
|
|
#define SDMA_XTRIG_CONF2 0x074
|
|
#define SDMA_CHNENBL0_IMX35 0x200
|
|
#define SDMA_CHNENBL0_IMX31 0x080
|
|
#define SDMA_CHNPRI_0 0x100
|
|
#define SDMA_DONE0_CONFIG 0x1000
|
|
|
|
/*
|
|
* Buffer descriptor status values.
|
|
*/
|
|
#define BD_DONE 0x01
|
|
#define BD_WRAP 0x02
|
|
#define BD_CONT 0x04
|
|
#define BD_INTR 0x08
|
|
#define BD_RROR 0x10
|
|
#define BD_LAST 0x20
|
|
#define BD_EXTD 0x80
|
|
|
|
/*
|
|
* Data Node descriptor status values.
|
|
*/
|
|
#define DND_END_OF_FRAME 0x80
|
|
#define DND_END_OF_XFER 0x40
|
|
#define DND_DONE 0x20
|
|
#define DND_UNUSED 0x01
|
|
|
|
/*
|
|
* IPCV2 descriptor status values.
|
|
*/
|
|
#define BD_IPCV2_END_OF_FRAME 0x40
|
|
|
|
#define IPCV2_MAX_NODES 50
|
|
/*
|
|
* Error bit set in the CCB status field by the SDMA,
|
|
* in setbd routine, in case of a transfer error
|
|
*/
|
|
#define DATA_ERROR 0x10000000
|
|
|
|
/*
|
|
* Buffer descriptor commands.
|
|
*/
|
|
#define C0_ADDR 0x01
|
|
#define C0_LOAD 0x02
|
|
#define C0_DUMP 0x03
|
|
#define C0_SETCTX 0x07
|
|
#define C0_GETCTX 0x03
|
|
#define C0_SETDM 0x01
|
|
#define C0_SETPM 0x04
|
|
#define C0_GETDM 0x02
|
|
#define C0_GETPM 0x08
|
|
/*
|
|
* Change endianness indicator in the BD command field
|
|
*/
|
|
#define CHANGE_ENDIANNESS 0x80
|
|
|
|
/*
|
|
* p_2_p watermark_level description
|
|
* Bits Name Description
|
|
* 0-7 Lower WML Lower watermark level
|
|
* 8 PS 1: Pad Swallowing
|
|
* 0: No Pad Swallowing
|
|
* 9 PA 1: Pad Adding
|
|
* 0: No Pad Adding
|
|
* 10 SPDIF If this bit is set both source
|
|
* and destination are on SPBA
|
|
* 11 Source Bit(SP) 1: Source on SPBA
|
|
* 0: Source on AIPS
|
|
* 12 Destination Bit(DP) 1: Destination on SPBA
|
|
* 0: Destination on AIPS
|
|
* 13-15 --------- MUST BE 0
|
|
* 16-23 Higher WML HWML
|
|
* 24-27 N Total number of samples after
|
|
* which Pad adding/Swallowing
|
|
* must be done. It must be odd.
|
|
* 28 Lower WML Event(LWE) SDMA events reg to check for
|
|
* LWML event mask
|
|
* 0: LWE in EVENTS register
|
|
* 1: LWE in EVENTS2 register
|
|
* 29 Higher WML Event(HWE) SDMA events reg to check for
|
|
* HWML event mask
|
|
* 0: HWE in EVENTS register
|
|
* 1: HWE in EVENTS2 register
|
|
* 30 --------- MUST BE 0
|
|
* 31 CONT 1: Amount of samples to be
|
|
* transferred is unknown and
|
|
* script will keep on
|
|
* transferring samples as long as
|
|
* both events are detected and
|
|
* script must be manually stopped
|
|
* by the application
|
|
* 0: The amount of samples to be
|
|
* transferred is equal to the
|
|
* count field of mode word
|
|
*/
|
|
#define SDMA_WATERMARK_LEVEL_LWML 0xFF
|
|
#define SDMA_WATERMARK_LEVEL_PS BIT(8)
|
|
#define SDMA_WATERMARK_LEVEL_PA BIT(9)
|
|
#define SDMA_WATERMARK_LEVEL_SPDIF BIT(10)
|
|
#define SDMA_WATERMARK_LEVEL_SP BIT(11)
|
|
#define SDMA_WATERMARK_LEVEL_DP BIT(12)
|
|
#define SDMA_WATERMARK_LEVEL_HWML (0xFF << 16)
|
|
#define SDMA_WATERMARK_LEVEL_LWE BIT(28)
|
|
#define SDMA_WATERMARK_LEVEL_HWE BIT(29)
|
|
#define SDMA_WATERMARK_LEVEL_CONT BIT(31)
|
|
|
|
#define SDMA_DMA_BUSWIDTHS (BIT(DMA_SLAVE_BUSWIDTH_1_BYTE) | \
|
|
BIT(DMA_SLAVE_BUSWIDTH_2_BYTES) | \
|
|
BIT(DMA_SLAVE_BUSWIDTH_4_BYTES))
|
|
|
|
#define SDMA_DMA_DIRECTIONS (BIT(DMA_DEV_TO_MEM) | \
|
|
BIT(DMA_MEM_TO_DEV) | \
|
|
BIT(DMA_DEV_TO_DEV))
|
|
|
|
#define SDMA_WATERMARK_LEVEL_N_FIFOS GENMASK(15, 12)
|
|
#define SDMA_WATERMARK_LEVEL_OFF_FIFOS GENMASK(19, 16)
|
|
#define SDMA_WATERMARK_LEVEL_WORDS_PER_FIFO GENMASK(31, 28)
|
|
#define SDMA_WATERMARK_LEVEL_SW_DONE BIT(23)
|
|
|
|
#define SDMA_DONE0_CONFIG_DONE_SEL BIT(7)
|
|
#define SDMA_DONE0_CONFIG_DONE_DIS BIT(6)
|
|
|
|
/*
|
|
* struct sdma_script_start_addrs - SDMA script start pointers
|
|
*
|
|
* start addresses of the different functions in the physical
|
|
* address space of the SDMA engine.
|
|
*/
|
|
struct sdma_script_start_addrs {
|
|
s32 ap_2_ap_addr;
|
|
s32 ap_2_bp_addr;
|
|
s32 ap_2_ap_fixed_addr;
|
|
s32 bp_2_ap_addr;
|
|
s32 loopback_on_dsp_side_addr;
|
|
s32 mcu_interrupt_only_addr;
|
|
s32 firi_2_per_addr;
|
|
s32 firi_2_mcu_addr;
|
|
s32 per_2_firi_addr;
|
|
s32 mcu_2_firi_addr;
|
|
s32 uart_2_per_addr;
|
|
s32 uart_2_mcu_addr;
|
|
s32 per_2_app_addr;
|
|
s32 mcu_2_app_addr;
|
|
s32 per_2_per_addr;
|
|
s32 uartsh_2_per_addr;
|
|
s32 uartsh_2_mcu_addr;
|
|
s32 per_2_shp_addr;
|
|
s32 mcu_2_shp_addr;
|
|
s32 ata_2_mcu_addr;
|
|
s32 mcu_2_ata_addr;
|
|
s32 app_2_per_addr;
|
|
s32 app_2_mcu_addr;
|
|
s32 shp_2_per_addr;
|
|
s32 shp_2_mcu_addr;
|
|
s32 mshc_2_mcu_addr;
|
|
s32 mcu_2_mshc_addr;
|
|
s32 spdif_2_mcu_addr;
|
|
s32 mcu_2_spdif_addr;
|
|
s32 asrc_2_mcu_addr;
|
|
s32 ext_mem_2_ipu_addr;
|
|
s32 descrambler_addr;
|
|
s32 dptc_dvfs_addr;
|
|
s32 utra_addr;
|
|
s32 ram_code_start_addr;
|
|
/* End of v1 array */
|
|
s32 mcu_2_ssish_addr;
|
|
s32 ssish_2_mcu_addr;
|
|
s32 hdmi_dma_addr;
|
|
/* End of v2 array */
|
|
s32 zcanfd_2_mcu_addr;
|
|
s32 zqspi_2_mcu_addr;
|
|
s32 mcu_2_ecspi_addr;
|
|
s32 mcu_2_sai_addr;
|
|
s32 sai_2_mcu_addr;
|
|
s32 uart_2_mcu_rom_addr;
|
|
s32 uartsh_2_mcu_rom_addr;
|
|
/* End of v3 array */
|
|
s32 mcu_2_zqspi_addr;
|
|
/* End of v4 array */
|
|
};
|
|
|
|
/*
|
|
* Mode/Count of data node descriptors - IPCv2
|
|
*/
|
|
struct sdma_mode_count {
|
|
#define SDMA_BD_MAX_CNT 0xffff
|
|
u32 count : 16; /* size of the buffer pointed by this BD */
|
|
u32 status : 8; /* E,R,I,C,W,D status bits stored here */
|
|
u32 command : 8; /* command mostly used for channel 0 */
|
|
};
|
|
|
|
/*
|
|
* Buffer descriptor
|
|
*/
|
|
struct sdma_buffer_descriptor {
|
|
struct sdma_mode_count mode;
|
|
u32 buffer_addr; /* address of the buffer described */
|
|
u32 ext_buffer_addr; /* extended buffer address */
|
|
} __attribute__ ((packed));
|
|
|
|
/**
|
|
* struct sdma_channel_control - Channel control Block
|
|
*
|
|
* @current_bd_ptr: current buffer descriptor processed
|
|
* @base_bd_ptr: first element of buffer descriptor array
|
|
* @unused: padding. The SDMA engine expects an array of 128 byte
|
|
* control blocks
|
|
*/
|
|
struct sdma_channel_control {
|
|
u32 current_bd_ptr;
|
|
u32 base_bd_ptr;
|
|
u32 unused[2];
|
|
} __attribute__ ((packed));
|
|
|
|
/**
|
|
* struct sdma_state_registers - SDMA context for a channel
|
|
*
|
|
* @pc: program counter
|
|
* @unused1: unused
|
|
* @t: test bit: status of arithmetic & test instruction
|
|
* @rpc: return program counter
|
|
* @unused0: unused
|
|
* @sf: source fault while loading data
|
|
* @spc: loop start program counter
|
|
* @unused2: unused
|
|
* @df: destination fault while storing data
|
|
* @epc: loop end program counter
|
|
* @lm: loop mode
|
|
*/
|
|
struct sdma_state_registers {
|
|
u32 pc :14;
|
|
u32 unused1: 1;
|
|
u32 t : 1;
|
|
u32 rpc :14;
|
|
u32 unused0: 1;
|
|
u32 sf : 1;
|
|
u32 spc :14;
|
|
u32 unused2: 1;
|
|
u32 df : 1;
|
|
u32 epc :14;
|
|
u32 lm : 2;
|
|
} __attribute__ ((packed));
|
|
|
|
/**
|
|
* struct sdma_context_data - sdma context specific to a channel
|
|
*
|
|
* @channel_state: channel state bits
|
|
* @gReg: general registers
|
|
* @mda: burst dma destination address register
|
|
* @msa: burst dma source address register
|
|
* @ms: burst dma status register
|
|
* @md: burst dma data register
|
|
* @pda: peripheral dma destination address register
|
|
* @psa: peripheral dma source address register
|
|
* @ps: peripheral dma status register
|
|
* @pd: peripheral dma data register
|
|
* @ca: CRC polynomial register
|
|
* @cs: CRC accumulator register
|
|
* @dda: dedicated core destination address register
|
|
* @dsa: dedicated core source address register
|
|
* @ds: dedicated core status register
|
|
* @dd: dedicated core data register
|
|
* @scratch0: 1st word of dedicated ram for context switch
|
|
* @scratch1: 2nd word of dedicated ram for context switch
|
|
* @scratch2: 3rd word of dedicated ram for context switch
|
|
* @scratch3: 4th word of dedicated ram for context switch
|
|
* @scratch4: 5th word of dedicated ram for context switch
|
|
* @scratch5: 6th word of dedicated ram for context switch
|
|
* @scratch6: 7th word of dedicated ram for context switch
|
|
* @scratch7: 8th word of dedicated ram for context switch
|
|
*/
|
|
struct sdma_context_data {
|
|
struct sdma_state_registers channel_state;
|
|
u32 gReg[8];
|
|
u32 mda;
|
|
u32 msa;
|
|
u32 ms;
|
|
u32 md;
|
|
u32 pda;
|
|
u32 psa;
|
|
u32 ps;
|
|
u32 pd;
|
|
u32 ca;
|
|
u32 cs;
|
|
u32 dda;
|
|
u32 dsa;
|
|
u32 ds;
|
|
u32 dd;
|
|
u32 scratch0;
|
|
u32 scratch1;
|
|
u32 scratch2;
|
|
u32 scratch3;
|
|
u32 scratch4;
|
|
u32 scratch5;
|
|
u32 scratch6;
|
|
u32 scratch7;
|
|
} __attribute__ ((packed));
|
|
|
|
|
|
struct sdma_engine;
|
|
|
|
/**
|
|
* struct sdma_desc - descriptor structor for one transfer
|
|
* @vd: descriptor for virt dma
|
|
* @num_bd: number of descriptors currently handling
|
|
* @bd_phys: physical address of bd
|
|
* @buf_tail: ID of the buffer that was processed
|
|
* @buf_ptail: ID of the previous buffer that was processed
|
|
* @period_len: period length, used in cyclic.
|
|
* @chn_real_count: the real count updated from bd->mode.count
|
|
* @chn_count: the transfer count set
|
|
* @sdmac: sdma_channel pointer
|
|
* @bd: pointer of allocate bd
|
|
*/
|
|
struct sdma_desc {
|
|
struct virt_dma_desc vd;
|
|
unsigned int num_bd;
|
|
dma_addr_t bd_phys;
|
|
unsigned int buf_tail;
|
|
unsigned int buf_ptail;
|
|
unsigned int period_len;
|
|
unsigned int chn_real_count;
|
|
unsigned int chn_count;
|
|
struct sdma_channel *sdmac;
|
|
struct sdma_buffer_descriptor *bd;
|
|
};
|
|
|
|
/**
|
|
* struct sdma_channel - housekeeping for a SDMA channel
|
|
*
|
|
* @vc: virt_dma base structure
|
|
* @desc: sdma description including vd and other special member
|
|
* @sdma: pointer to the SDMA engine for this channel
|
|
* @channel: the channel number, matches dmaengine chan_id + 1
|
|
* @direction: transfer type. Needed for setting SDMA script
|
|
* @slave_config: Slave configuration
|
|
* @peripheral_type: Peripheral type. Needed for setting SDMA script
|
|
* @event_id0: aka dma request line
|
|
* @event_id1: for channels that use 2 events
|
|
* @word_size: peripheral access size
|
|
* @pc_from_device: script address for those device_2_memory
|
|
* @pc_to_device: script address for those memory_2_device
|
|
* @device_to_device: script address for those device_2_device
|
|
* @pc_to_pc: script address for those memory_2_memory
|
|
* @flags: loop mode or not
|
|
* @per_address: peripheral source or destination address in common case
|
|
* destination address in p_2_p case
|
|
* @per_address2: peripheral source address in p_2_p case
|
|
* @event_mask: event mask used in p_2_p script
|
|
* @watermark_level: value for gReg[7], some script will extend it from
|
|
* basic watermark such as p_2_p
|
|
* @shp_addr: value for gReg[6]
|
|
* @per_addr: value for gReg[2]
|
|
* @status: status of dma channel
|
|
* @context_loaded: ensure context is only loaded once
|
|
* @data: specific sdma interface structure
|
|
* @bd_pool: dma_pool for bd
|
|
* @terminate_worker: used to call back into terminate work function
|
|
* @terminated: terminated list
|
|
* @is_ram_script: flag for script in ram
|
|
* @n_fifos_src: number of source device fifos
|
|
* @n_fifos_dst: number of destination device fifos
|
|
* @sw_done: software done flag
|
|
* @stride_fifos_src: stride for source device FIFOs
|
|
* @stride_fifos_dst: stride for destination device FIFOs
|
|
* @words_per_fifo: copy number of words one time for one FIFO
|
|
*/
|
|
struct sdma_channel {
|
|
struct virt_dma_chan vc;
|
|
struct sdma_desc *desc;
|
|
struct sdma_engine *sdma;
|
|
unsigned int channel;
|
|
enum dma_transfer_direction direction;
|
|
struct dma_slave_config slave_config;
|
|
enum sdma_peripheral_type peripheral_type;
|
|
unsigned int event_id0;
|
|
unsigned int event_id1;
|
|
enum dma_slave_buswidth word_size;
|
|
unsigned int pc_from_device, pc_to_device;
|
|
unsigned int device_to_device;
|
|
unsigned int pc_to_pc;
|
|
unsigned long flags;
|
|
dma_addr_t per_address, per_address2;
|
|
unsigned long event_mask[2];
|
|
unsigned long watermark_level;
|
|
u32 shp_addr, per_addr;
|
|
enum dma_status status;
|
|
struct imx_dma_data data;
|
|
struct work_struct terminate_worker;
|
|
struct list_head terminated;
|
|
bool is_ram_script;
|
|
unsigned int n_fifos_src;
|
|
unsigned int n_fifos_dst;
|
|
unsigned int stride_fifos_src;
|
|
unsigned int stride_fifos_dst;
|
|
unsigned int words_per_fifo;
|
|
bool sw_done;
|
|
};
|
|
|
|
#define IMX_DMA_SG_LOOP BIT(0)
|
|
|
|
#define MAX_DMA_CHANNELS 32
|
|
#define MXC_SDMA_DEFAULT_PRIORITY 1
|
|
#define MXC_SDMA_MIN_PRIORITY 1
|
|
#define MXC_SDMA_MAX_PRIORITY 7
|
|
|
|
#define SDMA_FIRMWARE_MAGIC 0x414d4453
|
|
|
|
/**
|
|
* struct sdma_firmware_header - Layout of the firmware image
|
|
*
|
|
* @magic: "SDMA"
|
|
* @version_major: increased whenever layout of struct
|
|
* sdma_script_start_addrs changes.
|
|
* @version_minor: firmware minor version (for binary compatible changes)
|
|
* @script_addrs_start: offset of struct sdma_script_start_addrs in this image
|
|
* @num_script_addrs: Number of script addresses in this image
|
|
* @ram_code_start: offset of SDMA ram image in this firmware image
|
|
* @ram_code_size: size of SDMA ram image
|
|
* @script_addrs: Stores the start address of the SDMA scripts
|
|
* (in SDMA memory space)
|
|
*/
|
|
struct sdma_firmware_header {
|
|
u32 magic;
|
|
u32 version_major;
|
|
u32 version_minor;
|
|
u32 script_addrs_start;
|
|
u32 num_script_addrs;
|
|
u32 ram_code_start;
|
|
u32 ram_code_size;
|
|
};
|
|
|
|
struct sdma_driver_data {
|
|
int chnenbl0;
|
|
int num_events;
|
|
struct sdma_script_start_addrs *script_addrs;
|
|
bool check_ratio;
|
|
/*
|
|
* ecspi ERR009165 fixed should be done in sdma script
|
|
* and it has been fixed in soc from i.mx6ul.
|
|
* please get more information from the below link:
|
|
* https://www.nxp.com/docs/en/errata/IMX6DQCE.pdf
|
|
*/
|
|
bool ecspi_fixed;
|
|
};
|
|
|
|
struct sdma_engine {
|
|
struct device *dev;
|
|
struct sdma_channel channel[MAX_DMA_CHANNELS];
|
|
struct sdma_channel_control *channel_control;
|
|
void __iomem *regs;
|
|
struct sdma_context_data *context;
|
|
dma_addr_t context_phys;
|
|
struct dma_device dma_device;
|
|
struct clk *clk_ipg;
|
|
struct clk *clk_ahb;
|
|
spinlock_t channel_0_lock;
|
|
u32 script_number;
|
|
struct sdma_script_start_addrs *script_addrs;
|
|
const struct sdma_driver_data *drvdata;
|
|
u32 spba_start_addr;
|
|
u32 spba_end_addr;
|
|
unsigned int irq;
|
|
dma_addr_t bd0_phys;
|
|
struct sdma_buffer_descriptor *bd0;
|
|
/* clock ratio for AHB:SDMA core. 1:1 is 1, 2:1 is 0*/
|
|
bool clk_ratio;
|
|
bool fw_loaded;
|
|
};
|
|
|
|
static int sdma_config_write(struct dma_chan *chan,
|
|
struct dma_slave_config *dmaengine_cfg,
|
|
enum dma_transfer_direction direction);
|
|
|
|
static struct sdma_driver_data sdma_imx31 = {
|
|
.chnenbl0 = SDMA_CHNENBL0_IMX31,
|
|
.num_events = 32,
|
|
};
|
|
|
|
static struct sdma_script_start_addrs sdma_script_imx25 = {
|
|
.ap_2_ap_addr = 729,
|
|
.uart_2_mcu_addr = 904,
|
|
.per_2_app_addr = 1255,
|
|
.mcu_2_app_addr = 834,
|
|
.uartsh_2_mcu_addr = 1120,
|
|
.per_2_shp_addr = 1329,
|
|
.mcu_2_shp_addr = 1048,
|
|
.ata_2_mcu_addr = 1560,
|
|
.mcu_2_ata_addr = 1479,
|
|
.app_2_per_addr = 1189,
|
|
.app_2_mcu_addr = 770,
|
|
.shp_2_per_addr = 1407,
|
|
.shp_2_mcu_addr = 979,
|
|
};
|
|
|
|
static struct sdma_driver_data sdma_imx25 = {
|
|
.chnenbl0 = SDMA_CHNENBL0_IMX35,
|
|
.num_events = 48,
|
|
.script_addrs = &sdma_script_imx25,
|
|
};
|
|
|
|
static struct sdma_driver_data sdma_imx35 = {
|
|
.chnenbl0 = SDMA_CHNENBL0_IMX35,
|
|
.num_events = 48,
|
|
};
|
|
|
|
static struct sdma_script_start_addrs sdma_script_imx51 = {
|
|
.ap_2_ap_addr = 642,
|
|
.uart_2_mcu_addr = 817,
|
|
.mcu_2_app_addr = 747,
|
|
.mcu_2_shp_addr = 961,
|
|
.ata_2_mcu_addr = 1473,
|
|
.mcu_2_ata_addr = 1392,
|
|
.app_2_per_addr = 1033,
|
|
.app_2_mcu_addr = 683,
|
|
.shp_2_per_addr = 1251,
|
|
.shp_2_mcu_addr = 892,
|
|
};
|
|
|
|
static struct sdma_driver_data sdma_imx51 = {
|
|
.chnenbl0 = SDMA_CHNENBL0_IMX35,
|
|
.num_events = 48,
|
|
.script_addrs = &sdma_script_imx51,
|
|
};
|
|
|
|
static struct sdma_script_start_addrs sdma_script_imx53 = {
|
|
.ap_2_ap_addr = 642,
|
|
.app_2_mcu_addr = 683,
|
|
.mcu_2_app_addr = 747,
|
|
.uart_2_mcu_addr = 817,
|
|
.shp_2_mcu_addr = 891,
|
|
.mcu_2_shp_addr = 960,
|
|
.uartsh_2_mcu_addr = 1032,
|
|
.spdif_2_mcu_addr = 1100,
|
|
.mcu_2_spdif_addr = 1134,
|
|
.firi_2_mcu_addr = 1193,
|
|
.mcu_2_firi_addr = 1290,
|
|
};
|
|
|
|
static struct sdma_driver_data sdma_imx53 = {
|
|
.chnenbl0 = SDMA_CHNENBL0_IMX35,
|
|
.num_events = 48,
|
|
.script_addrs = &sdma_script_imx53,
|
|
};
|
|
|
|
static struct sdma_script_start_addrs sdma_script_imx6q = {
|
|
.ap_2_ap_addr = 642,
|
|
.uart_2_mcu_addr = 817,
|
|
.mcu_2_app_addr = 747,
|
|
.per_2_per_addr = 6331,
|
|
.uartsh_2_mcu_addr = 1032,
|
|
.mcu_2_shp_addr = 960,
|
|
.app_2_mcu_addr = 683,
|
|
.shp_2_mcu_addr = 891,
|
|
.spdif_2_mcu_addr = 1100,
|
|
.mcu_2_spdif_addr = 1134,
|
|
};
|
|
|
|
static struct sdma_driver_data sdma_imx6q = {
|
|
.chnenbl0 = SDMA_CHNENBL0_IMX35,
|
|
.num_events = 48,
|
|
.script_addrs = &sdma_script_imx6q,
|
|
};
|
|
|
|
static struct sdma_driver_data sdma_imx6ul = {
|
|
.chnenbl0 = SDMA_CHNENBL0_IMX35,
|
|
.num_events = 48,
|
|
.script_addrs = &sdma_script_imx6q,
|
|
.ecspi_fixed = true,
|
|
};
|
|
|
|
static struct sdma_script_start_addrs sdma_script_imx7d = {
|
|
.ap_2_ap_addr = 644,
|
|
.uart_2_mcu_addr = 819,
|
|
.mcu_2_app_addr = 749,
|
|
.uartsh_2_mcu_addr = 1034,
|
|
.mcu_2_shp_addr = 962,
|
|
.app_2_mcu_addr = 685,
|
|
.shp_2_mcu_addr = 893,
|
|
.spdif_2_mcu_addr = 1102,
|
|
.mcu_2_spdif_addr = 1136,
|
|
};
|
|
|
|
static struct sdma_driver_data sdma_imx7d = {
|
|
.chnenbl0 = SDMA_CHNENBL0_IMX35,
|
|
.num_events = 48,
|
|
.script_addrs = &sdma_script_imx7d,
|
|
};
|
|
|
|
static struct sdma_driver_data sdma_imx8mq = {
|
|
.chnenbl0 = SDMA_CHNENBL0_IMX35,
|
|
.num_events = 48,
|
|
.script_addrs = &sdma_script_imx7d,
|
|
.check_ratio = 1,
|
|
};
|
|
|
|
static const struct of_device_id sdma_dt_ids[] = {
|
|
{ .compatible = "fsl,imx6q-sdma", .data = &sdma_imx6q, },
|
|
{ .compatible = "fsl,imx53-sdma", .data = &sdma_imx53, },
|
|
{ .compatible = "fsl,imx51-sdma", .data = &sdma_imx51, },
|
|
{ .compatible = "fsl,imx35-sdma", .data = &sdma_imx35, },
|
|
{ .compatible = "fsl,imx31-sdma", .data = &sdma_imx31, },
|
|
{ .compatible = "fsl,imx25-sdma", .data = &sdma_imx25, },
|
|
{ .compatible = "fsl,imx7d-sdma", .data = &sdma_imx7d, },
|
|
{ .compatible = "fsl,imx6ul-sdma", .data = &sdma_imx6ul, },
|
|
{ .compatible = "fsl,imx8mq-sdma", .data = &sdma_imx8mq, },
|
|
{ /* sentinel */ }
|
|
};
|
|
MODULE_DEVICE_TABLE(of, sdma_dt_ids);
|
|
|
|
#define SDMA_H_CONFIG_DSPDMA BIT(12) /* indicates if the DSPDMA is used */
|
|
#define SDMA_H_CONFIG_RTD_PINS BIT(11) /* indicates if Real-Time Debug pins are enabled */
|
|
#define SDMA_H_CONFIG_ACR BIT(4) /* indicates if AHB freq /core freq = 2 or 1 */
|
|
#define SDMA_H_CONFIG_CSM (3) /* indicates which context switch mode is selected*/
|
|
|
|
static inline u32 chnenbl_ofs(struct sdma_engine *sdma, unsigned int event)
|
|
{
|
|
u32 chnenbl0 = sdma->drvdata->chnenbl0;
|
|
return chnenbl0 + event * 4;
|
|
}
|
|
|
|
static int sdma_config_ownership(struct sdma_channel *sdmac,
|
|
bool event_override, bool mcu_override, bool dsp_override)
|
|
{
|
|
struct sdma_engine *sdma = sdmac->sdma;
|
|
int channel = sdmac->channel;
|
|
unsigned long evt, mcu, dsp;
|
|
|
|
if (event_override && mcu_override && dsp_override)
|
|
return -EINVAL;
|
|
|
|
evt = readl_relaxed(sdma->regs + SDMA_H_EVTOVR);
|
|
mcu = readl_relaxed(sdma->regs + SDMA_H_HOSTOVR);
|
|
dsp = readl_relaxed(sdma->regs + SDMA_H_DSPOVR);
|
|
|
|
if (dsp_override)
|
|
__clear_bit(channel, &dsp);
|
|
else
|
|
__set_bit(channel, &dsp);
|
|
|
|
if (event_override)
|
|
__clear_bit(channel, &evt);
|
|
else
|
|
__set_bit(channel, &evt);
|
|
|
|
if (mcu_override)
|
|
__clear_bit(channel, &mcu);
|
|
else
|
|
__set_bit(channel, &mcu);
|
|
|
|
writel_relaxed(evt, sdma->regs + SDMA_H_EVTOVR);
|
|
writel_relaxed(mcu, sdma->regs + SDMA_H_HOSTOVR);
|
|
writel_relaxed(dsp, sdma->regs + SDMA_H_DSPOVR);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int is_sdma_channel_enabled(struct sdma_engine *sdma, int channel)
|
|
{
|
|
return !!(readl(sdma->regs + SDMA_H_STATSTOP) & BIT(channel));
|
|
}
|
|
|
|
static void sdma_enable_channel(struct sdma_engine *sdma, int channel)
|
|
{
|
|
writel(BIT(channel), sdma->regs + SDMA_H_START);
|
|
}
|
|
|
|
/*
|
|
* sdma_run_channel0 - run a channel and wait till it's done
|
|
*/
|
|
static int sdma_run_channel0(struct sdma_engine *sdma)
|
|
{
|
|
int ret;
|
|
u32 reg;
|
|
|
|
sdma_enable_channel(sdma, 0);
|
|
|
|
ret = readl_relaxed_poll_timeout_atomic(sdma->regs + SDMA_H_STATSTOP,
|
|
reg, !(reg & 1), 1, 500);
|
|
if (ret)
|
|
dev_err(sdma->dev, "Timeout waiting for CH0 ready\n");
|
|
|
|
/* Set bits of CONFIG register with dynamic context switching */
|
|
reg = readl(sdma->regs + SDMA_H_CONFIG);
|
|
if ((reg & SDMA_H_CONFIG_CSM) == 0) {
|
|
reg |= SDMA_H_CONFIG_CSM;
|
|
writel_relaxed(reg, sdma->regs + SDMA_H_CONFIG);
|
|
}
|
|
|
|
return ret;
|
|
}
|
|
|
|
static int sdma_load_script(struct sdma_engine *sdma, void *buf, int size,
|
|
u32 address)
|
|
{
|
|
struct sdma_buffer_descriptor *bd0 = sdma->bd0;
|
|
void *buf_virt;
|
|
dma_addr_t buf_phys;
|
|
int ret;
|
|
unsigned long flags;
|
|
|
|
buf_virt = dma_alloc_coherent(sdma->dev, size, &buf_phys, GFP_KERNEL);
|
|
if (!buf_virt)
|
|
return -ENOMEM;
|
|
|
|
spin_lock_irqsave(&sdma->channel_0_lock, flags);
|
|
|
|
bd0->mode.command = C0_SETPM;
|
|
bd0->mode.status = BD_DONE | BD_WRAP | BD_EXTD;
|
|
bd0->mode.count = size / 2;
|
|
bd0->buffer_addr = buf_phys;
|
|
bd0->ext_buffer_addr = address;
|
|
|
|
memcpy(buf_virt, buf, size);
|
|
|
|
ret = sdma_run_channel0(sdma);
|
|
|
|
spin_unlock_irqrestore(&sdma->channel_0_lock, flags);
|
|
|
|
dma_free_coherent(sdma->dev, size, buf_virt, buf_phys);
|
|
|
|
return ret;
|
|
}
|
|
|
|
static void sdma_event_enable(struct sdma_channel *sdmac, unsigned int event)
|
|
{
|
|
struct sdma_engine *sdma = sdmac->sdma;
|
|
int channel = sdmac->channel;
|
|
unsigned long val;
|
|
u32 chnenbl = chnenbl_ofs(sdma, event);
|
|
|
|
val = readl_relaxed(sdma->regs + chnenbl);
|
|
__set_bit(channel, &val);
|
|
writel_relaxed(val, sdma->regs + chnenbl);
|
|
|
|
/* Set SDMA_DONEx_CONFIG is sw_done enabled */
|
|
if (sdmac->sw_done) {
|
|
val = readl_relaxed(sdma->regs + SDMA_DONE0_CONFIG);
|
|
val |= SDMA_DONE0_CONFIG_DONE_SEL;
|
|
val &= ~SDMA_DONE0_CONFIG_DONE_DIS;
|
|
writel_relaxed(val, sdma->regs + SDMA_DONE0_CONFIG);
|
|
}
|
|
}
|
|
|
|
static void sdma_event_disable(struct sdma_channel *sdmac, unsigned int event)
|
|
{
|
|
struct sdma_engine *sdma = sdmac->sdma;
|
|
int channel = sdmac->channel;
|
|
u32 chnenbl = chnenbl_ofs(sdma, event);
|
|
unsigned long val;
|
|
|
|
val = readl_relaxed(sdma->regs + chnenbl);
|
|
__clear_bit(channel, &val);
|
|
writel_relaxed(val, sdma->regs + chnenbl);
|
|
}
|
|
|
|
static struct sdma_desc *to_sdma_desc(struct dma_async_tx_descriptor *t)
|
|
{
|
|
return container_of(t, struct sdma_desc, vd.tx);
|
|
}
|
|
|
|
static void sdma_start_desc(struct sdma_channel *sdmac)
|
|
{
|
|
struct virt_dma_desc *vd = vchan_next_desc(&sdmac->vc);
|
|
struct sdma_desc *desc;
|
|
struct sdma_engine *sdma = sdmac->sdma;
|
|
int channel = sdmac->channel;
|
|
|
|
if (!vd) {
|
|
sdmac->desc = NULL;
|
|
return;
|
|
}
|
|
sdmac->desc = desc = to_sdma_desc(&vd->tx);
|
|
|
|
list_del(&vd->node);
|
|
|
|
sdma->channel_control[channel].base_bd_ptr = desc->bd_phys;
|
|
sdma->channel_control[channel].current_bd_ptr = desc->bd_phys;
|
|
sdma_enable_channel(sdma, sdmac->channel);
|
|
}
|
|
|
|
static void sdma_update_channel_loop(struct sdma_channel *sdmac)
|
|
{
|
|
struct sdma_buffer_descriptor *bd;
|
|
int error = 0;
|
|
enum dma_status old_status = sdmac->status;
|
|
|
|
/*
|
|
* loop mode. Iterate over descriptors, re-setup them and
|
|
* call callback function.
|
|
*/
|
|
while (sdmac->desc) {
|
|
struct sdma_desc *desc = sdmac->desc;
|
|
|
|
bd = &desc->bd[desc->buf_tail];
|
|
|
|
if (bd->mode.status & BD_DONE)
|
|
break;
|
|
|
|
if (bd->mode.status & BD_RROR) {
|
|
bd->mode.status &= ~BD_RROR;
|
|
sdmac->status = DMA_ERROR;
|
|
error = -EIO;
|
|
}
|
|
|
|
/*
|
|
* We use bd->mode.count to calculate the residue, since contains
|
|
* the number of bytes present in the current buffer descriptor.
|
|
*/
|
|
|
|
desc->chn_real_count = bd->mode.count;
|
|
bd->mode.count = desc->period_len;
|
|
desc->buf_ptail = desc->buf_tail;
|
|
desc->buf_tail = (desc->buf_tail + 1) % desc->num_bd;
|
|
|
|
/*
|
|
* The callback is called from the interrupt context in order
|
|
* to reduce latency and to avoid the risk of altering the
|
|
* SDMA transaction status by the time the client tasklet is
|
|
* executed.
|
|
*/
|
|
spin_unlock(&sdmac->vc.lock);
|
|
dmaengine_desc_get_callback_invoke(&desc->vd.tx, NULL);
|
|
spin_lock(&sdmac->vc.lock);
|
|
|
|
/* Assign buffer ownership to SDMA */
|
|
bd->mode.status |= BD_DONE;
|
|
|
|
if (error)
|
|
sdmac->status = old_status;
|
|
}
|
|
|
|
/*
|
|
* SDMA stops cyclic channel when DMA request triggers a channel and no SDMA
|
|
* owned buffer is available (i.e. BD_DONE was set too late).
|
|
*/
|
|
if (sdmac->desc && !is_sdma_channel_enabled(sdmac->sdma, sdmac->channel)) {
|
|
dev_warn(sdmac->sdma->dev, "restart cyclic channel %d\n", sdmac->channel);
|
|
sdma_enable_channel(sdmac->sdma, sdmac->channel);
|
|
}
|
|
}
|
|
|
|
static void mxc_sdma_handle_channel_normal(struct sdma_channel *data)
|
|
{
|
|
struct sdma_channel *sdmac = (struct sdma_channel *) data;
|
|
struct sdma_buffer_descriptor *bd;
|
|
int i, error = 0;
|
|
|
|
sdmac->desc->chn_real_count = 0;
|
|
/*
|
|
* non loop mode. Iterate over all descriptors, collect
|
|
* errors and call callback function
|
|
*/
|
|
for (i = 0; i < sdmac->desc->num_bd; i++) {
|
|
bd = &sdmac->desc->bd[i];
|
|
|
|
if (bd->mode.status & (BD_DONE | BD_RROR))
|
|
error = -EIO;
|
|
sdmac->desc->chn_real_count += bd->mode.count;
|
|
}
|
|
|
|
if (error)
|
|
sdmac->status = DMA_ERROR;
|
|
else
|
|
sdmac->status = DMA_COMPLETE;
|
|
}
|
|
|
|
static irqreturn_t sdma_int_handler(int irq, void *dev_id)
|
|
{
|
|
struct sdma_engine *sdma = dev_id;
|
|
unsigned long stat;
|
|
|
|
stat = readl_relaxed(sdma->regs + SDMA_H_INTR);
|
|
writel_relaxed(stat, sdma->regs + SDMA_H_INTR);
|
|
/* channel 0 is special and not handled here, see run_channel0() */
|
|
stat &= ~1;
|
|
|
|
while (stat) {
|
|
int channel = fls(stat) - 1;
|
|
struct sdma_channel *sdmac = &sdma->channel[channel];
|
|
struct sdma_desc *desc;
|
|
|
|
spin_lock(&sdmac->vc.lock);
|
|
desc = sdmac->desc;
|
|
if (desc) {
|
|
if (sdmac->flags & IMX_DMA_SG_LOOP) {
|
|
sdma_update_channel_loop(sdmac);
|
|
} else {
|
|
mxc_sdma_handle_channel_normal(sdmac);
|
|
vchan_cookie_complete(&desc->vd);
|
|
sdma_start_desc(sdmac);
|
|
}
|
|
}
|
|
|
|
spin_unlock(&sdmac->vc.lock);
|
|
__clear_bit(channel, &stat);
|
|
}
|
|
|
|
return IRQ_HANDLED;
|
|
}
|
|
|
|
/*
|
|
* sets the pc of SDMA script according to the peripheral type
|
|
*/
|
|
static int sdma_get_pc(struct sdma_channel *sdmac,
|
|
enum sdma_peripheral_type peripheral_type)
|
|
{
|
|
struct sdma_engine *sdma = sdmac->sdma;
|
|
int per_2_emi = 0, emi_2_per = 0;
|
|
/*
|
|
* These are needed once we start to support transfers between
|
|
* two peripherals or memory-to-memory transfers
|
|
*/
|
|
int per_2_per = 0, emi_2_emi = 0;
|
|
|
|
sdmac->pc_from_device = 0;
|
|
sdmac->pc_to_device = 0;
|
|
sdmac->device_to_device = 0;
|
|
sdmac->pc_to_pc = 0;
|
|
sdmac->is_ram_script = false;
|
|
|
|
switch (peripheral_type) {
|
|
case IMX_DMATYPE_MEMORY:
|
|
emi_2_emi = sdma->script_addrs->ap_2_ap_addr;
|
|
break;
|
|
case IMX_DMATYPE_DSP:
|
|
emi_2_per = sdma->script_addrs->bp_2_ap_addr;
|
|
per_2_emi = sdma->script_addrs->ap_2_bp_addr;
|
|
break;
|
|
case IMX_DMATYPE_FIRI:
|
|
per_2_emi = sdma->script_addrs->firi_2_mcu_addr;
|
|
emi_2_per = sdma->script_addrs->mcu_2_firi_addr;
|
|
break;
|
|
case IMX_DMATYPE_UART:
|
|
per_2_emi = sdma->script_addrs->uart_2_mcu_addr;
|
|
emi_2_per = sdma->script_addrs->mcu_2_app_addr;
|
|
break;
|
|
case IMX_DMATYPE_UART_SP:
|
|
per_2_emi = sdma->script_addrs->uartsh_2_mcu_addr;
|
|
emi_2_per = sdma->script_addrs->mcu_2_shp_addr;
|
|
break;
|
|
case IMX_DMATYPE_ATA:
|
|
per_2_emi = sdma->script_addrs->ata_2_mcu_addr;
|
|
emi_2_per = sdma->script_addrs->mcu_2_ata_addr;
|
|
break;
|
|
case IMX_DMATYPE_CSPI:
|
|
per_2_emi = sdma->script_addrs->app_2_mcu_addr;
|
|
|
|
/* Use rom script mcu_2_app if ERR009165 fixed */
|
|
if (sdmac->sdma->drvdata->ecspi_fixed) {
|
|
emi_2_per = sdma->script_addrs->mcu_2_app_addr;
|
|
} else {
|
|
emi_2_per = sdma->script_addrs->mcu_2_ecspi_addr;
|
|
sdmac->is_ram_script = true;
|
|
}
|
|
|
|
break;
|
|
case IMX_DMATYPE_EXT:
|
|
case IMX_DMATYPE_SSI:
|
|
case IMX_DMATYPE_SAI:
|
|
per_2_emi = sdma->script_addrs->app_2_mcu_addr;
|
|
emi_2_per = sdma->script_addrs->mcu_2_app_addr;
|
|
break;
|
|
case IMX_DMATYPE_SSI_DUAL:
|
|
per_2_emi = sdma->script_addrs->ssish_2_mcu_addr;
|
|
emi_2_per = sdma->script_addrs->mcu_2_ssish_addr;
|
|
sdmac->is_ram_script = true;
|
|
break;
|
|
case IMX_DMATYPE_SSI_SP:
|
|
case IMX_DMATYPE_MMC:
|
|
case IMX_DMATYPE_SDHC:
|
|
case IMX_DMATYPE_CSPI_SP:
|
|
case IMX_DMATYPE_ESAI:
|
|
case IMX_DMATYPE_MSHC_SP:
|
|
per_2_emi = sdma->script_addrs->shp_2_mcu_addr;
|
|
emi_2_per = sdma->script_addrs->mcu_2_shp_addr;
|
|
break;
|
|
case IMX_DMATYPE_ASRC:
|
|
per_2_emi = sdma->script_addrs->asrc_2_mcu_addr;
|
|
emi_2_per = sdma->script_addrs->asrc_2_mcu_addr;
|
|
per_2_per = sdma->script_addrs->per_2_per_addr;
|
|
sdmac->is_ram_script = true;
|
|
break;
|
|
case IMX_DMATYPE_ASRC_SP:
|
|
per_2_emi = sdma->script_addrs->shp_2_mcu_addr;
|
|
emi_2_per = sdma->script_addrs->mcu_2_shp_addr;
|
|
per_2_per = sdma->script_addrs->per_2_per_addr;
|
|
break;
|
|
case IMX_DMATYPE_MSHC:
|
|
per_2_emi = sdma->script_addrs->mshc_2_mcu_addr;
|
|
emi_2_per = sdma->script_addrs->mcu_2_mshc_addr;
|
|
break;
|
|
case IMX_DMATYPE_CCM:
|
|
per_2_emi = sdma->script_addrs->dptc_dvfs_addr;
|
|
break;
|
|
case IMX_DMATYPE_SPDIF:
|
|
per_2_emi = sdma->script_addrs->spdif_2_mcu_addr;
|
|
emi_2_per = sdma->script_addrs->mcu_2_spdif_addr;
|
|
break;
|
|
case IMX_DMATYPE_IPU_MEMORY:
|
|
emi_2_per = sdma->script_addrs->ext_mem_2_ipu_addr;
|
|
break;
|
|
case IMX_DMATYPE_MULTI_SAI:
|
|
per_2_emi = sdma->script_addrs->sai_2_mcu_addr;
|
|
emi_2_per = sdma->script_addrs->mcu_2_sai_addr;
|
|
break;
|
|
default:
|
|
dev_err(sdma->dev, "Unsupported transfer type %d\n",
|
|
peripheral_type);
|
|
return -EINVAL;
|
|
}
|
|
|
|
sdmac->pc_from_device = per_2_emi;
|
|
sdmac->pc_to_device = emi_2_per;
|
|
sdmac->device_to_device = per_2_per;
|
|
sdmac->pc_to_pc = emi_2_emi;
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int sdma_load_context(struct sdma_channel *sdmac)
|
|
{
|
|
struct sdma_engine *sdma = sdmac->sdma;
|
|
int channel = sdmac->channel;
|
|
int load_address;
|
|
struct sdma_context_data *context = sdma->context;
|
|
struct sdma_buffer_descriptor *bd0 = sdma->bd0;
|
|
int ret;
|
|
unsigned long flags;
|
|
|
|
if (sdmac->direction == DMA_DEV_TO_MEM)
|
|
load_address = sdmac->pc_from_device;
|
|
else if (sdmac->direction == DMA_DEV_TO_DEV)
|
|
load_address = sdmac->device_to_device;
|
|
else if (sdmac->direction == DMA_MEM_TO_MEM)
|
|
load_address = sdmac->pc_to_pc;
|
|
else
|
|
load_address = sdmac->pc_to_device;
|
|
|
|
if (load_address < 0)
|
|
return load_address;
|
|
|
|
dev_dbg(sdma->dev, "load_address = %d\n", load_address);
|
|
dev_dbg(sdma->dev, "wml = 0x%08x\n", (u32)sdmac->watermark_level);
|
|
dev_dbg(sdma->dev, "shp_addr = 0x%08x\n", sdmac->shp_addr);
|
|
dev_dbg(sdma->dev, "per_addr = 0x%08x\n", sdmac->per_addr);
|
|
dev_dbg(sdma->dev, "event_mask0 = 0x%08x\n", (u32)sdmac->event_mask[0]);
|
|
dev_dbg(sdma->dev, "event_mask1 = 0x%08x\n", (u32)sdmac->event_mask[1]);
|
|
|
|
spin_lock_irqsave(&sdma->channel_0_lock, flags);
|
|
|
|
memset(context, 0, sizeof(*context));
|
|
context->channel_state.pc = load_address;
|
|
|
|
/* Send by context the event mask,base address for peripheral
|
|
* and watermark level
|
|
*/
|
|
context->gReg[0] = sdmac->event_mask[1];
|
|
context->gReg[1] = sdmac->event_mask[0];
|
|
context->gReg[2] = sdmac->per_addr;
|
|
context->gReg[6] = sdmac->shp_addr;
|
|
context->gReg[7] = sdmac->watermark_level;
|
|
|
|
bd0->mode.command = C0_SETDM;
|
|
bd0->mode.status = BD_DONE | BD_WRAP | BD_EXTD;
|
|
bd0->mode.count = sizeof(*context) / 4;
|
|
bd0->buffer_addr = sdma->context_phys;
|
|
bd0->ext_buffer_addr = 2048 + (sizeof(*context) / 4) * channel;
|
|
ret = sdma_run_channel0(sdma);
|
|
|
|
spin_unlock_irqrestore(&sdma->channel_0_lock, flags);
|
|
|
|
return ret;
|
|
}
|
|
|
|
static struct sdma_channel *to_sdma_chan(struct dma_chan *chan)
|
|
{
|
|
return container_of(chan, struct sdma_channel, vc.chan);
|
|
}
|
|
|
|
static int sdma_disable_channel(struct dma_chan *chan)
|
|
{
|
|
struct sdma_channel *sdmac = to_sdma_chan(chan);
|
|
struct sdma_engine *sdma = sdmac->sdma;
|
|
int channel = sdmac->channel;
|
|
|
|
writel_relaxed(BIT(channel), sdma->regs + SDMA_H_STATSTOP);
|
|
sdmac->status = DMA_ERROR;
|
|
|
|
return 0;
|
|
}
|
|
static void sdma_channel_terminate_work(struct work_struct *work)
|
|
{
|
|
struct sdma_channel *sdmac = container_of(work, struct sdma_channel,
|
|
terminate_worker);
|
|
/*
|
|
* According to NXP R&D team a delay of one BD SDMA cost time
|
|
* (maximum is 1ms) should be added after disable of the channel
|
|
* bit, to ensure SDMA core has really been stopped after SDMA
|
|
* clients call .device_terminate_all.
|
|
*/
|
|
usleep_range(1000, 2000);
|
|
|
|
vchan_dma_desc_free_list(&sdmac->vc, &sdmac->terminated);
|
|
}
|
|
|
|
static int sdma_terminate_all(struct dma_chan *chan)
|
|
{
|
|
struct sdma_channel *sdmac = to_sdma_chan(chan);
|
|
unsigned long flags;
|
|
|
|
spin_lock_irqsave(&sdmac->vc.lock, flags);
|
|
|
|
sdma_disable_channel(chan);
|
|
|
|
if (sdmac->desc) {
|
|
vchan_terminate_vdesc(&sdmac->desc->vd);
|
|
/*
|
|
* move out current descriptor into terminated list so that
|
|
* it could be free in sdma_channel_terminate_work alone
|
|
* later without potential involving next descriptor raised
|
|
* up before the last descriptor terminated.
|
|
*/
|
|
vchan_get_all_descriptors(&sdmac->vc, &sdmac->terminated);
|
|
sdmac->desc = NULL;
|
|
schedule_work(&sdmac->terminate_worker);
|
|
}
|
|
|
|
spin_unlock_irqrestore(&sdmac->vc.lock, flags);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static void sdma_channel_synchronize(struct dma_chan *chan)
|
|
{
|
|
struct sdma_channel *sdmac = to_sdma_chan(chan);
|
|
|
|
vchan_synchronize(&sdmac->vc);
|
|
|
|
flush_work(&sdmac->terminate_worker);
|
|
}
|
|
|
|
static void sdma_set_watermarklevel_for_p2p(struct sdma_channel *sdmac)
|
|
{
|
|
struct sdma_engine *sdma = sdmac->sdma;
|
|
|
|
int lwml = sdmac->watermark_level & SDMA_WATERMARK_LEVEL_LWML;
|
|
int hwml = (sdmac->watermark_level & SDMA_WATERMARK_LEVEL_HWML) >> 16;
|
|
|
|
set_bit(sdmac->event_id0 % 32, &sdmac->event_mask[1]);
|
|
set_bit(sdmac->event_id1 % 32, &sdmac->event_mask[0]);
|
|
|
|
if (sdmac->event_id0 > 31)
|
|
sdmac->watermark_level |= SDMA_WATERMARK_LEVEL_LWE;
|
|
|
|
if (sdmac->event_id1 > 31)
|
|
sdmac->watermark_level |= SDMA_WATERMARK_LEVEL_HWE;
|
|
|
|
/*
|
|
* If LWML(src_maxburst) > HWML(dst_maxburst), we need
|
|
* swap LWML and HWML of INFO(A.3.2.5.1), also need swap
|
|
* r0(event_mask[1]) and r1(event_mask[0]).
|
|
*/
|
|
if (lwml > hwml) {
|
|
sdmac->watermark_level &= ~(SDMA_WATERMARK_LEVEL_LWML |
|
|
SDMA_WATERMARK_LEVEL_HWML);
|
|
sdmac->watermark_level |= hwml;
|
|
sdmac->watermark_level |= lwml << 16;
|
|
swap(sdmac->event_mask[0], sdmac->event_mask[1]);
|
|
}
|
|
|
|
if (sdmac->per_address2 >= sdma->spba_start_addr &&
|
|
sdmac->per_address2 <= sdma->spba_end_addr)
|
|
sdmac->watermark_level |= SDMA_WATERMARK_LEVEL_SP;
|
|
|
|
if (sdmac->per_address >= sdma->spba_start_addr &&
|
|
sdmac->per_address <= sdma->spba_end_addr)
|
|
sdmac->watermark_level |= SDMA_WATERMARK_LEVEL_DP;
|
|
|
|
sdmac->watermark_level |= SDMA_WATERMARK_LEVEL_CONT;
|
|
}
|
|
|
|
static void sdma_set_watermarklevel_for_sais(struct sdma_channel *sdmac)
|
|
{
|
|
unsigned int n_fifos;
|
|
unsigned int stride_fifos;
|
|
unsigned int words_per_fifo;
|
|
|
|
if (sdmac->sw_done)
|
|
sdmac->watermark_level |= SDMA_WATERMARK_LEVEL_SW_DONE;
|
|
|
|
if (sdmac->direction == DMA_DEV_TO_MEM) {
|
|
n_fifos = sdmac->n_fifos_src;
|
|
stride_fifos = sdmac->stride_fifos_src;
|
|
} else {
|
|
n_fifos = sdmac->n_fifos_dst;
|
|
stride_fifos = sdmac->stride_fifos_dst;
|
|
}
|
|
|
|
words_per_fifo = sdmac->words_per_fifo;
|
|
|
|
sdmac->watermark_level |=
|
|
FIELD_PREP(SDMA_WATERMARK_LEVEL_N_FIFOS, n_fifos);
|
|
sdmac->watermark_level |=
|
|
FIELD_PREP(SDMA_WATERMARK_LEVEL_OFF_FIFOS, stride_fifos);
|
|
if (words_per_fifo)
|
|
sdmac->watermark_level |=
|
|
FIELD_PREP(SDMA_WATERMARK_LEVEL_WORDS_PER_FIFO, (words_per_fifo - 1));
|
|
}
|
|
|
|
static int sdma_config_channel(struct dma_chan *chan)
|
|
{
|
|
struct sdma_channel *sdmac = to_sdma_chan(chan);
|
|
int ret;
|
|
|
|
sdma_disable_channel(chan);
|
|
|
|
sdmac->event_mask[0] = 0;
|
|
sdmac->event_mask[1] = 0;
|
|
sdmac->shp_addr = 0;
|
|
sdmac->per_addr = 0;
|
|
|
|
switch (sdmac->peripheral_type) {
|
|
case IMX_DMATYPE_DSP:
|
|
sdma_config_ownership(sdmac, false, true, true);
|
|
break;
|
|
case IMX_DMATYPE_MEMORY:
|
|
sdma_config_ownership(sdmac, false, true, false);
|
|
break;
|
|
default:
|
|
sdma_config_ownership(sdmac, true, true, false);
|
|
break;
|
|
}
|
|
|
|
ret = sdma_get_pc(sdmac, sdmac->peripheral_type);
|
|
if (ret)
|
|
return ret;
|
|
|
|
if ((sdmac->peripheral_type != IMX_DMATYPE_MEMORY) &&
|
|
(sdmac->peripheral_type != IMX_DMATYPE_DSP)) {
|
|
/* Handle multiple event channels differently */
|
|
if (sdmac->event_id1) {
|
|
if (sdmac->peripheral_type == IMX_DMATYPE_ASRC_SP ||
|
|
sdmac->peripheral_type == IMX_DMATYPE_ASRC)
|
|
sdma_set_watermarklevel_for_p2p(sdmac);
|
|
} else {
|
|
if (sdmac->peripheral_type ==
|
|
IMX_DMATYPE_MULTI_SAI)
|
|
sdma_set_watermarklevel_for_sais(sdmac);
|
|
|
|
__set_bit(sdmac->event_id0, sdmac->event_mask);
|
|
}
|
|
|
|
/* Address */
|
|
sdmac->shp_addr = sdmac->per_address;
|
|
sdmac->per_addr = sdmac->per_address2;
|
|
} else {
|
|
sdmac->watermark_level = 0; /* FIXME: M3_BASE_ADDRESS */
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int sdma_set_channel_priority(struct sdma_channel *sdmac,
|
|
unsigned int priority)
|
|
{
|
|
struct sdma_engine *sdma = sdmac->sdma;
|
|
int channel = sdmac->channel;
|
|
|
|
if (priority < MXC_SDMA_MIN_PRIORITY
|
|
|| priority > MXC_SDMA_MAX_PRIORITY) {
|
|
return -EINVAL;
|
|
}
|
|
|
|
writel_relaxed(priority, sdma->regs + SDMA_CHNPRI_0 + 4 * channel);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int sdma_request_channel0(struct sdma_engine *sdma)
|
|
{
|
|
int ret = -EBUSY;
|
|
|
|
sdma->bd0 = dma_alloc_coherent(sdma->dev, PAGE_SIZE, &sdma->bd0_phys,
|
|
GFP_NOWAIT);
|
|
if (!sdma->bd0) {
|
|
ret = -ENOMEM;
|
|
goto out;
|
|
}
|
|
|
|
sdma->channel_control[0].base_bd_ptr = sdma->bd0_phys;
|
|
sdma->channel_control[0].current_bd_ptr = sdma->bd0_phys;
|
|
|
|
sdma_set_channel_priority(&sdma->channel[0], MXC_SDMA_DEFAULT_PRIORITY);
|
|
return 0;
|
|
out:
|
|
|
|
return ret;
|
|
}
|
|
|
|
|
|
static int sdma_alloc_bd(struct sdma_desc *desc)
|
|
{
|
|
u32 bd_size = desc->num_bd * sizeof(struct sdma_buffer_descriptor);
|
|
int ret = 0;
|
|
|
|
desc->bd = dma_alloc_coherent(desc->sdmac->sdma->dev, bd_size,
|
|
&desc->bd_phys, GFP_NOWAIT);
|
|
if (!desc->bd) {
|
|
ret = -ENOMEM;
|
|
goto out;
|
|
}
|
|
out:
|
|
return ret;
|
|
}
|
|
|
|
static void sdma_free_bd(struct sdma_desc *desc)
|
|
{
|
|
u32 bd_size = desc->num_bd * sizeof(struct sdma_buffer_descriptor);
|
|
|
|
dma_free_coherent(desc->sdmac->sdma->dev, bd_size, desc->bd,
|
|
desc->bd_phys);
|
|
}
|
|
|
|
static void sdma_desc_free(struct virt_dma_desc *vd)
|
|
{
|
|
struct sdma_desc *desc = container_of(vd, struct sdma_desc, vd);
|
|
|
|
sdma_free_bd(desc);
|
|
kfree(desc);
|
|
}
|
|
|
|
static int sdma_alloc_chan_resources(struct dma_chan *chan)
|
|
{
|
|
struct sdma_channel *sdmac = to_sdma_chan(chan);
|
|
struct imx_dma_data *data = chan->private;
|
|
struct imx_dma_data mem_data;
|
|
int prio, ret;
|
|
|
|
/*
|
|
* MEMCPY may never setup chan->private by filter function such as
|
|
* dmatest, thus create 'struct imx_dma_data mem_data' for this case.
|
|
* Please note in any other slave case, you have to setup chan->private
|
|
* with 'struct imx_dma_data' in your own filter function if you want to
|
|
* request dma channel by dma_request_channel() rather than
|
|
* dma_request_slave_channel(). Othwise, 'MEMCPY in case?' will appear
|
|
* to warn you to correct your filter function.
|
|
*/
|
|
if (!data) {
|
|
dev_dbg(sdmac->sdma->dev, "MEMCPY in case?\n");
|
|
mem_data.priority = 2;
|
|
mem_data.peripheral_type = IMX_DMATYPE_MEMORY;
|
|
mem_data.dma_request = 0;
|
|
mem_data.dma_request2 = 0;
|
|
data = &mem_data;
|
|
|
|
ret = sdma_get_pc(sdmac, IMX_DMATYPE_MEMORY);
|
|
if (ret)
|
|
return ret;
|
|
}
|
|
|
|
switch (data->priority) {
|
|
case DMA_PRIO_HIGH:
|
|
prio = 3;
|
|
break;
|
|
case DMA_PRIO_MEDIUM:
|
|
prio = 2;
|
|
break;
|
|
case DMA_PRIO_LOW:
|
|
default:
|
|
prio = 1;
|
|
break;
|
|
}
|
|
|
|
sdmac->peripheral_type = data->peripheral_type;
|
|
sdmac->event_id0 = data->dma_request;
|
|
sdmac->event_id1 = data->dma_request2;
|
|
|
|
ret = clk_enable(sdmac->sdma->clk_ipg);
|
|
if (ret)
|
|
return ret;
|
|
ret = clk_enable(sdmac->sdma->clk_ahb);
|
|
if (ret)
|
|
goto disable_clk_ipg;
|
|
|
|
ret = sdma_set_channel_priority(sdmac, prio);
|
|
if (ret)
|
|
goto disable_clk_ahb;
|
|
|
|
return 0;
|
|
|
|
disable_clk_ahb:
|
|
clk_disable(sdmac->sdma->clk_ahb);
|
|
disable_clk_ipg:
|
|
clk_disable(sdmac->sdma->clk_ipg);
|
|
return ret;
|
|
}
|
|
|
|
static void sdma_free_chan_resources(struct dma_chan *chan)
|
|
{
|
|
struct sdma_channel *sdmac = to_sdma_chan(chan);
|
|
struct sdma_engine *sdma = sdmac->sdma;
|
|
|
|
sdma_terminate_all(chan);
|
|
|
|
sdma_channel_synchronize(chan);
|
|
|
|
sdma_event_disable(sdmac, sdmac->event_id0);
|
|
if (sdmac->event_id1)
|
|
sdma_event_disable(sdmac, sdmac->event_id1);
|
|
|
|
sdmac->event_id0 = 0;
|
|
sdmac->event_id1 = 0;
|
|
|
|
sdma_set_channel_priority(sdmac, 0);
|
|
|
|
clk_disable(sdma->clk_ipg);
|
|
clk_disable(sdma->clk_ahb);
|
|
}
|
|
|
|
static struct sdma_desc *sdma_transfer_init(struct sdma_channel *sdmac,
|
|
enum dma_transfer_direction direction, u32 bds)
|
|
{
|
|
struct sdma_desc *desc;
|
|
|
|
if (!sdmac->sdma->fw_loaded && sdmac->is_ram_script) {
|
|
dev_warn_once(sdmac->sdma->dev, "sdma firmware not ready!\n");
|
|
goto err_out;
|
|
}
|
|
|
|
desc = kzalloc((sizeof(*desc)), GFP_NOWAIT);
|
|
if (!desc)
|
|
goto err_out;
|
|
|
|
sdmac->status = DMA_IN_PROGRESS;
|
|
sdmac->direction = direction;
|
|
sdmac->flags = 0;
|
|
|
|
desc->chn_count = 0;
|
|
desc->chn_real_count = 0;
|
|
desc->buf_tail = 0;
|
|
desc->buf_ptail = 0;
|
|
desc->sdmac = sdmac;
|
|
desc->num_bd = bds;
|
|
|
|
if (sdma_alloc_bd(desc))
|
|
goto err_desc_out;
|
|
|
|
/* No slave_config called in MEMCPY case, so do here */
|
|
if (direction == DMA_MEM_TO_MEM)
|
|
sdma_config_ownership(sdmac, false, true, false);
|
|
|
|
if (sdma_load_context(sdmac))
|
|
goto err_bd_out;
|
|
|
|
return desc;
|
|
|
|
err_bd_out:
|
|
sdma_free_bd(desc);
|
|
err_desc_out:
|
|
kfree(desc);
|
|
err_out:
|
|
return NULL;
|
|
}
|
|
|
|
static struct dma_async_tx_descriptor *sdma_prep_memcpy(
|
|
struct dma_chan *chan, dma_addr_t dma_dst,
|
|
dma_addr_t dma_src, size_t len, unsigned long flags)
|
|
{
|
|
struct sdma_channel *sdmac = to_sdma_chan(chan);
|
|
struct sdma_engine *sdma = sdmac->sdma;
|
|
int channel = sdmac->channel;
|
|
size_t count;
|
|
int i = 0, param;
|
|
struct sdma_buffer_descriptor *bd;
|
|
struct sdma_desc *desc;
|
|
|
|
if (!chan || !len)
|
|
return NULL;
|
|
|
|
dev_dbg(sdma->dev, "memcpy: %pad->%pad, len=%zu, channel=%d.\n",
|
|
&dma_src, &dma_dst, len, channel);
|
|
|
|
desc = sdma_transfer_init(sdmac, DMA_MEM_TO_MEM,
|
|
len / SDMA_BD_MAX_CNT + 1);
|
|
if (!desc)
|
|
return NULL;
|
|
|
|
do {
|
|
count = min_t(size_t, len, SDMA_BD_MAX_CNT);
|
|
bd = &desc->bd[i];
|
|
bd->buffer_addr = dma_src;
|
|
bd->ext_buffer_addr = dma_dst;
|
|
bd->mode.count = count;
|
|
desc->chn_count += count;
|
|
bd->mode.command = 0;
|
|
|
|
dma_src += count;
|
|
dma_dst += count;
|
|
len -= count;
|
|
i++;
|
|
|
|
param = BD_DONE | BD_EXTD | BD_CONT;
|
|
/* last bd */
|
|
if (!len) {
|
|
param |= BD_INTR;
|
|
param |= BD_LAST;
|
|
param &= ~BD_CONT;
|
|
}
|
|
|
|
dev_dbg(sdma->dev, "entry %d: count: %zd dma: 0x%x %s%s\n",
|
|
i, count, bd->buffer_addr,
|
|
param & BD_WRAP ? "wrap" : "",
|
|
param & BD_INTR ? " intr" : "");
|
|
|
|
bd->mode.status = param;
|
|
} while (len);
|
|
|
|
return vchan_tx_prep(&sdmac->vc, &desc->vd, flags);
|
|
}
|
|
|
|
static struct dma_async_tx_descriptor *sdma_prep_slave_sg(
|
|
struct dma_chan *chan, struct scatterlist *sgl,
|
|
unsigned int sg_len, enum dma_transfer_direction direction,
|
|
unsigned long flags, void *context)
|
|
{
|
|
struct sdma_channel *sdmac = to_sdma_chan(chan);
|
|
struct sdma_engine *sdma = sdmac->sdma;
|
|
int i, count;
|
|
int channel = sdmac->channel;
|
|
struct scatterlist *sg;
|
|
struct sdma_desc *desc;
|
|
|
|
sdma_config_write(chan, &sdmac->slave_config, direction);
|
|
|
|
desc = sdma_transfer_init(sdmac, direction, sg_len);
|
|
if (!desc)
|
|
goto err_out;
|
|
|
|
dev_dbg(sdma->dev, "setting up %d entries for channel %d.\n",
|
|
sg_len, channel);
|
|
|
|
for_each_sg(sgl, sg, sg_len, i) {
|
|
struct sdma_buffer_descriptor *bd = &desc->bd[i];
|
|
int param;
|
|
|
|
bd->buffer_addr = sg->dma_address;
|
|
|
|
count = sg_dma_len(sg);
|
|
|
|
if (count > SDMA_BD_MAX_CNT) {
|
|
dev_err(sdma->dev, "SDMA channel %d: maximum bytes for sg entry exceeded: %d > %d\n",
|
|
channel, count, SDMA_BD_MAX_CNT);
|
|
goto err_bd_out;
|
|
}
|
|
|
|
bd->mode.count = count;
|
|
desc->chn_count += count;
|
|
|
|
if (sdmac->word_size > DMA_SLAVE_BUSWIDTH_4_BYTES)
|
|
goto err_bd_out;
|
|
|
|
switch (sdmac->word_size) {
|
|
case DMA_SLAVE_BUSWIDTH_4_BYTES:
|
|
bd->mode.command = 0;
|
|
if (count & 3 || sg->dma_address & 3)
|
|
goto err_bd_out;
|
|
break;
|
|
case DMA_SLAVE_BUSWIDTH_2_BYTES:
|
|
bd->mode.command = 2;
|
|
if (count & 1 || sg->dma_address & 1)
|
|
goto err_bd_out;
|
|
break;
|
|
case DMA_SLAVE_BUSWIDTH_1_BYTE:
|
|
bd->mode.command = 1;
|
|
break;
|
|
default:
|
|
goto err_bd_out;
|
|
}
|
|
|
|
param = BD_DONE | BD_EXTD | BD_CONT;
|
|
|
|
if (i + 1 == sg_len) {
|
|
param |= BD_INTR;
|
|
param |= BD_LAST;
|
|
param &= ~BD_CONT;
|
|
}
|
|
|
|
dev_dbg(sdma->dev, "entry %d: count: %d dma: %#llx %s%s\n",
|
|
i, count, (u64)sg->dma_address,
|
|
param & BD_WRAP ? "wrap" : "",
|
|
param & BD_INTR ? " intr" : "");
|
|
|
|
bd->mode.status = param;
|
|
}
|
|
|
|
return vchan_tx_prep(&sdmac->vc, &desc->vd, flags);
|
|
err_bd_out:
|
|
sdma_free_bd(desc);
|
|
kfree(desc);
|
|
err_out:
|
|
sdmac->status = DMA_ERROR;
|
|
return NULL;
|
|
}
|
|
|
|
static struct dma_async_tx_descriptor *sdma_prep_dma_cyclic(
|
|
struct dma_chan *chan, dma_addr_t dma_addr, size_t buf_len,
|
|
size_t period_len, enum dma_transfer_direction direction,
|
|
unsigned long flags)
|
|
{
|
|
struct sdma_channel *sdmac = to_sdma_chan(chan);
|
|
struct sdma_engine *sdma = sdmac->sdma;
|
|
int num_periods = buf_len / period_len;
|
|
int channel = sdmac->channel;
|
|
int i = 0, buf = 0;
|
|
struct sdma_desc *desc;
|
|
|
|
dev_dbg(sdma->dev, "%s channel: %d\n", __func__, channel);
|
|
|
|
sdma_config_write(chan, &sdmac->slave_config, direction);
|
|
|
|
desc = sdma_transfer_init(sdmac, direction, num_periods);
|
|
if (!desc)
|
|
goto err_out;
|
|
|
|
desc->period_len = period_len;
|
|
|
|
sdmac->flags |= IMX_DMA_SG_LOOP;
|
|
|
|
if (period_len > SDMA_BD_MAX_CNT) {
|
|
dev_err(sdma->dev, "SDMA channel %d: maximum period size exceeded: %zu > %d\n",
|
|
channel, period_len, SDMA_BD_MAX_CNT);
|
|
goto err_bd_out;
|
|
}
|
|
|
|
while (buf < buf_len) {
|
|
struct sdma_buffer_descriptor *bd = &desc->bd[i];
|
|
int param;
|
|
|
|
bd->buffer_addr = dma_addr;
|
|
|
|
bd->mode.count = period_len;
|
|
|
|
if (sdmac->word_size > DMA_SLAVE_BUSWIDTH_4_BYTES)
|
|
goto err_bd_out;
|
|
if (sdmac->word_size == DMA_SLAVE_BUSWIDTH_4_BYTES)
|
|
bd->mode.command = 0;
|
|
else
|
|
bd->mode.command = sdmac->word_size;
|
|
|
|
param = BD_DONE | BD_EXTD | BD_CONT | BD_INTR;
|
|
if (i + 1 == num_periods)
|
|
param |= BD_WRAP;
|
|
|
|
dev_dbg(sdma->dev, "entry %d: count: %zu dma: %#llx %s%s\n",
|
|
i, period_len, (u64)dma_addr,
|
|
param & BD_WRAP ? "wrap" : "",
|
|
param & BD_INTR ? " intr" : "");
|
|
|
|
bd->mode.status = param;
|
|
|
|
dma_addr += period_len;
|
|
buf += period_len;
|
|
|
|
i++;
|
|
}
|
|
|
|
return vchan_tx_prep(&sdmac->vc, &desc->vd, flags);
|
|
err_bd_out:
|
|
sdma_free_bd(desc);
|
|
kfree(desc);
|
|
err_out:
|
|
sdmac->status = DMA_ERROR;
|
|
return NULL;
|
|
}
|
|
|
|
static int sdma_config_write(struct dma_chan *chan,
|
|
struct dma_slave_config *dmaengine_cfg,
|
|
enum dma_transfer_direction direction)
|
|
{
|
|
struct sdma_channel *sdmac = to_sdma_chan(chan);
|
|
|
|
if (direction == DMA_DEV_TO_MEM) {
|
|
sdmac->per_address = dmaengine_cfg->src_addr;
|
|
sdmac->watermark_level = dmaengine_cfg->src_maxburst *
|
|
dmaengine_cfg->src_addr_width;
|
|
sdmac->word_size = dmaengine_cfg->src_addr_width;
|
|
} else if (direction == DMA_DEV_TO_DEV) {
|
|
sdmac->per_address2 = dmaengine_cfg->src_addr;
|
|
sdmac->per_address = dmaengine_cfg->dst_addr;
|
|
sdmac->watermark_level = dmaengine_cfg->src_maxburst &
|
|
SDMA_WATERMARK_LEVEL_LWML;
|
|
sdmac->watermark_level |= (dmaengine_cfg->dst_maxburst << 16) &
|
|
SDMA_WATERMARK_LEVEL_HWML;
|
|
sdmac->word_size = dmaengine_cfg->dst_addr_width;
|
|
} else {
|
|
sdmac->per_address = dmaengine_cfg->dst_addr;
|
|
sdmac->watermark_level = dmaengine_cfg->dst_maxburst *
|
|
dmaengine_cfg->dst_addr_width;
|
|
sdmac->word_size = dmaengine_cfg->dst_addr_width;
|
|
}
|
|
sdmac->direction = direction;
|
|
return sdma_config_channel(chan);
|
|
}
|
|
|
|
static int sdma_config(struct dma_chan *chan,
|
|
struct dma_slave_config *dmaengine_cfg)
|
|
{
|
|
struct sdma_channel *sdmac = to_sdma_chan(chan);
|
|
struct sdma_engine *sdma = sdmac->sdma;
|
|
|
|
memcpy(&sdmac->slave_config, dmaengine_cfg, sizeof(*dmaengine_cfg));
|
|
|
|
if (dmaengine_cfg->peripheral_config) {
|
|
struct sdma_peripheral_config *sdmacfg = dmaengine_cfg->peripheral_config;
|
|
if (dmaengine_cfg->peripheral_size != sizeof(struct sdma_peripheral_config)) {
|
|
dev_err(sdma->dev, "Invalid peripheral size %zu, expected %zu\n",
|
|
dmaengine_cfg->peripheral_size,
|
|
sizeof(struct sdma_peripheral_config));
|
|
return -EINVAL;
|
|
}
|
|
sdmac->n_fifos_src = sdmacfg->n_fifos_src;
|
|
sdmac->n_fifos_dst = sdmacfg->n_fifos_dst;
|
|
sdmac->stride_fifos_src = sdmacfg->stride_fifos_src;
|
|
sdmac->stride_fifos_dst = sdmacfg->stride_fifos_dst;
|
|
sdmac->words_per_fifo = sdmacfg->words_per_fifo;
|
|
sdmac->sw_done = sdmacfg->sw_done;
|
|
}
|
|
|
|
/* Set ENBLn earlier to make sure dma request triggered after that */
|
|
if (sdmac->event_id0 >= sdmac->sdma->drvdata->num_events)
|
|
return -EINVAL;
|
|
sdma_event_enable(sdmac, sdmac->event_id0);
|
|
|
|
if (sdmac->event_id1) {
|
|
if (sdmac->event_id1 >= sdmac->sdma->drvdata->num_events)
|
|
return -EINVAL;
|
|
sdma_event_enable(sdmac, sdmac->event_id1);
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
static enum dma_status sdma_tx_status(struct dma_chan *chan,
|
|
dma_cookie_t cookie,
|
|
struct dma_tx_state *txstate)
|
|
{
|
|
struct sdma_channel *sdmac = to_sdma_chan(chan);
|
|
struct sdma_desc *desc = NULL;
|
|
u32 residue;
|
|
struct virt_dma_desc *vd;
|
|
enum dma_status ret;
|
|
unsigned long flags;
|
|
|
|
ret = dma_cookie_status(chan, cookie, txstate);
|
|
if (ret == DMA_COMPLETE || !txstate)
|
|
return ret;
|
|
|
|
spin_lock_irqsave(&sdmac->vc.lock, flags);
|
|
|
|
vd = vchan_find_desc(&sdmac->vc, cookie);
|
|
if (vd)
|
|
desc = to_sdma_desc(&vd->tx);
|
|
else if (sdmac->desc && sdmac->desc->vd.tx.cookie == cookie)
|
|
desc = sdmac->desc;
|
|
|
|
if (desc) {
|
|
if (sdmac->flags & IMX_DMA_SG_LOOP)
|
|
residue = (desc->num_bd - desc->buf_ptail) *
|
|
desc->period_len - desc->chn_real_count;
|
|
else
|
|
residue = desc->chn_count - desc->chn_real_count;
|
|
} else {
|
|
residue = 0;
|
|
}
|
|
|
|
spin_unlock_irqrestore(&sdmac->vc.lock, flags);
|
|
|
|
dma_set_tx_state(txstate, chan->completed_cookie, chan->cookie,
|
|
residue);
|
|
|
|
return sdmac->status;
|
|
}
|
|
|
|
static void sdma_issue_pending(struct dma_chan *chan)
|
|
{
|
|
struct sdma_channel *sdmac = to_sdma_chan(chan);
|
|
unsigned long flags;
|
|
|
|
spin_lock_irqsave(&sdmac->vc.lock, flags);
|
|
if (vchan_issue_pending(&sdmac->vc) && !sdmac->desc)
|
|
sdma_start_desc(sdmac);
|
|
spin_unlock_irqrestore(&sdmac->vc.lock, flags);
|
|
}
|
|
|
|
#define SDMA_SCRIPT_ADDRS_ARRAY_SIZE_V1 34
|
|
#define SDMA_SCRIPT_ADDRS_ARRAY_SIZE_V2 38
|
|
#define SDMA_SCRIPT_ADDRS_ARRAY_SIZE_V3 45
|
|
#define SDMA_SCRIPT_ADDRS_ARRAY_SIZE_V4 46
|
|
|
|
static void sdma_add_scripts(struct sdma_engine *sdma,
|
|
const struct sdma_script_start_addrs *addr)
|
|
{
|
|
s32 *addr_arr = (u32 *)addr;
|
|
s32 *saddr_arr = (u32 *)sdma->script_addrs;
|
|
int i;
|
|
|
|
/* use the default firmware in ROM if missing external firmware */
|
|
if (!sdma->script_number)
|
|
sdma->script_number = SDMA_SCRIPT_ADDRS_ARRAY_SIZE_V1;
|
|
|
|
if (sdma->script_number > sizeof(struct sdma_script_start_addrs)
|
|
/ sizeof(s32)) {
|
|
dev_err(sdma->dev,
|
|
"SDMA script number %d not match with firmware.\n",
|
|
sdma->script_number);
|
|
return;
|
|
}
|
|
|
|
for (i = 0; i < sdma->script_number; i++)
|
|
if (addr_arr[i] > 0)
|
|
saddr_arr[i] = addr_arr[i];
|
|
|
|
/*
|
|
* For compatibility with NXP internal legacy kernel before 4.19 which
|
|
* is based on uart ram script and mainline kernel based on uart rom
|
|
* script, both uart ram/rom scripts are present in newer sdma
|
|
* firmware. Use the rom versions if they are present (V3 or newer).
|
|
*/
|
|
if (sdma->script_number >= SDMA_SCRIPT_ADDRS_ARRAY_SIZE_V3) {
|
|
if (addr->uart_2_mcu_rom_addr)
|
|
sdma->script_addrs->uart_2_mcu_addr = addr->uart_2_mcu_rom_addr;
|
|
if (addr->uartsh_2_mcu_rom_addr)
|
|
sdma->script_addrs->uartsh_2_mcu_addr = addr->uartsh_2_mcu_rom_addr;
|
|
}
|
|
}
|
|
|
|
static void sdma_load_firmware(const struct firmware *fw, void *context)
|
|
{
|
|
struct sdma_engine *sdma = context;
|
|
const struct sdma_firmware_header *header;
|
|
const struct sdma_script_start_addrs *addr;
|
|
unsigned short *ram_code;
|
|
|
|
if (!fw) {
|
|
dev_info(sdma->dev, "external firmware not found, using ROM firmware\n");
|
|
/* In this case we just use the ROM firmware. */
|
|
return;
|
|
}
|
|
|
|
if (fw->size < sizeof(*header))
|
|
goto err_firmware;
|
|
|
|
header = (struct sdma_firmware_header *)fw->data;
|
|
|
|
if (header->magic != SDMA_FIRMWARE_MAGIC)
|
|
goto err_firmware;
|
|
if (header->ram_code_start + header->ram_code_size > fw->size)
|
|
goto err_firmware;
|
|
switch (header->version_major) {
|
|
case 1:
|
|
sdma->script_number = SDMA_SCRIPT_ADDRS_ARRAY_SIZE_V1;
|
|
break;
|
|
case 2:
|
|
sdma->script_number = SDMA_SCRIPT_ADDRS_ARRAY_SIZE_V2;
|
|
break;
|
|
case 3:
|
|
sdma->script_number = SDMA_SCRIPT_ADDRS_ARRAY_SIZE_V3;
|
|
break;
|
|
case 4:
|
|
sdma->script_number = SDMA_SCRIPT_ADDRS_ARRAY_SIZE_V4;
|
|
break;
|
|
default:
|
|
dev_err(sdma->dev, "unknown firmware version\n");
|
|
goto err_firmware;
|
|
}
|
|
|
|
addr = (void *)header + header->script_addrs_start;
|
|
ram_code = (void *)header + header->ram_code_start;
|
|
|
|
clk_enable(sdma->clk_ipg);
|
|
clk_enable(sdma->clk_ahb);
|
|
/* download the RAM image for SDMA */
|
|
sdma_load_script(sdma, ram_code,
|
|
header->ram_code_size,
|
|
addr->ram_code_start_addr);
|
|
clk_disable(sdma->clk_ipg);
|
|
clk_disable(sdma->clk_ahb);
|
|
|
|
sdma_add_scripts(sdma, addr);
|
|
|
|
sdma->fw_loaded = true;
|
|
|
|
dev_info(sdma->dev, "loaded firmware %d.%d\n",
|
|
header->version_major,
|
|
header->version_minor);
|
|
|
|
err_firmware:
|
|
release_firmware(fw);
|
|
}
|
|
|
|
#define EVENT_REMAP_CELLS 3
|
|
|
|
static int sdma_event_remap(struct sdma_engine *sdma)
|
|
{
|
|
struct device_node *np = sdma->dev->of_node;
|
|
struct device_node *gpr_np = of_parse_phandle(np, "gpr", 0);
|
|
struct property *event_remap;
|
|
struct regmap *gpr;
|
|
char propname[] = "fsl,sdma-event-remap";
|
|
u32 reg, val, shift, num_map, i;
|
|
int ret = 0;
|
|
|
|
if (IS_ERR(np) || !gpr_np)
|
|
goto out;
|
|
|
|
event_remap = of_find_property(np, propname, NULL);
|
|
num_map = event_remap ? (event_remap->length / sizeof(u32)) : 0;
|
|
if (!num_map) {
|
|
dev_dbg(sdma->dev, "no event needs to be remapped\n");
|
|
goto out;
|
|
} else if (num_map % EVENT_REMAP_CELLS) {
|
|
dev_err(sdma->dev, "the property %s must modulo %d\n",
|
|
propname, EVENT_REMAP_CELLS);
|
|
ret = -EINVAL;
|
|
goto out;
|
|
}
|
|
|
|
gpr = syscon_node_to_regmap(gpr_np);
|
|
if (IS_ERR(gpr)) {
|
|
dev_err(sdma->dev, "failed to get gpr regmap\n");
|
|
ret = PTR_ERR(gpr);
|
|
goto out;
|
|
}
|
|
|
|
for (i = 0; i < num_map; i += EVENT_REMAP_CELLS) {
|
|
ret = of_property_read_u32_index(np, propname, i, ®);
|
|
if (ret) {
|
|
dev_err(sdma->dev, "failed to read property %s index %d\n",
|
|
propname, i);
|
|
goto out;
|
|
}
|
|
|
|
ret = of_property_read_u32_index(np, propname, i + 1, &shift);
|
|
if (ret) {
|
|
dev_err(sdma->dev, "failed to read property %s index %d\n",
|
|
propname, i + 1);
|
|
goto out;
|
|
}
|
|
|
|
ret = of_property_read_u32_index(np, propname, i + 2, &val);
|
|
if (ret) {
|
|
dev_err(sdma->dev, "failed to read property %s index %d\n",
|
|
propname, i + 2);
|
|
goto out;
|
|
}
|
|
|
|
regmap_update_bits(gpr, reg, BIT(shift), val << shift);
|
|
}
|
|
|
|
out:
|
|
if (gpr_np)
|
|
of_node_put(gpr_np);
|
|
|
|
return ret;
|
|
}
|
|
|
|
static int sdma_get_firmware(struct sdma_engine *sdma,
|
|
const char *fw_name)
|
|
{
|
|
int ret;
|
|
|
|
ret = request_firmware_nowait(THIS_MODULE,
|
|
FW_ACTION_UEVENT, fw_name, sdma->dev,
|
|
GFP_KERNEL, sdma, sdma_load_firmware);
|
|
|
|
return ret;
|
|
}
|
|
|
|
static int sdma_init(struct sdma_engine *sdma)
|
|
{
|
|
int i, ret;
|
|
dma_addr_t ccb_phys;
|
|
|
|
ret = clk_enable(sdma->clk_ipg);
|
|
if (ret)
|
|
return ret;
|
|
ret = clk_enable(sdma->clk_ahb);
|
|
if (ret)
|
|
goto disable_clk_ipg;
|
|
|
|
if (sdma->drvdata->check_ratio &&
|
|
(clk_get_rate(sdma->clk_ahb) == clk_get_rate(sdma->clk_ipg)))
|
|
sdma->clk_ratio = 1;
|
|
|
|
/* Be sure SDMA has not started yet */
|
|
writel_relaxed(0, sdma->regs + SDMA_H_C0PTR);
|
|
|
|
sdma->channel_control = dma_alloc_coherent(sdma->dev,
|
|
MAX_DMA_CHANNELS * sizeof(struct sdma_channel_control) +
|
|
sizeof(struct sdma_context_data),
|
|
&ccb_phys, GFP_KERNEL);
|
|
|
|
if (!sdma->channel_control) {
|
|
ret = -ENOMEM;
|
|
goto err_dma_alloc;
|
|
}
|
|
|
|
sdma->context = (void *)sdma->channel_control +
|
|
MAX_DMA_CHANNELS * sizeof(struct sdma_channel_control);
|
|
sdma->context_phys = ccb_phys +
|
|
MAX_DMA_CHANNELS * sizeof(struct sdma_channel_control);
|
|
|
|
/* disable all channels */
|
|
for (i = 0; i < sdma->drvdata->num_events; i++)
|
|
writel_relaxed(0, sdma->regs + chnenbl_ofs(sdma, i));
|
|
|
|
/* All channels have priority 0 */
|
|
for (i = 0; i < MAX_DMA_CHANNELS; i++)
|
|
writel_relaxed(0, sdma->regs + SDMA_CHNPRI_0 + i * 4);
|
|
|
|
ret = sdma_request_channel0(sdma);
|
|
if (ret)
|
|
goto err_dma_alloc;
|
|
|
|
sdma_config_ownership(&sdma->channel[0], false, true, false);
|
|
|
|
/* Set Command Channel (Channel Zero) */
|
|
writel_relaxed(0x4050, sdma->regs + SDMA_CHN0ADDR);
|
|
|
|
/* Set bits of CONFIG register but with static context switching */
|
|
if (sdma->clk_ratio)
|
|
writel_relaxed(SDMA_H_CONFIG_ACR, sdma->regs + SDMA_H_CONFIG);
|
|
else
|
|
writel_relaxed(0, sdma->regs + SDMA_H_CONFIG);
|
|
|
|
writel_relaxed(ccb_phys, sdma->regs + SDMA_H_C0PTR);
|
|
|
|
/* Initializes channel's priorities */
|
|
sdma_set_channel_priority(&sdma->channel[0], 7);
|
|
|
|
clk_disable(sdma->clk_ipg);
|
|
clk_disable(sdma->clk_ahb);
|
|
|
|
return 0;
|
|
|
|
err_dma_alloc:
|
|
clk_disable(sdma->clk_ahb);
|
|
disable_clk_ipg:
|
|
clk_disable(sdma->clk_ipg);
|
|
dev_err(sdma->dev, "initialisation failed with %d\n", ret);
|
|
return ret;
|
|
}
|
|
|
|
static bool sdma_filter_fn(struct dma_chan *chan, void *fn_param)
|
|
{
|
|
struct sdma_channel *sdmac = to_sdma_chan(chan);
|
|
struct imx_dma_data *data = fn_param;
|
|
|
|
if (!imx_dma_is_general_purpose(chan))
|
|
return false;
|
|
|
|
sdmac->data = *data;
|
|
chan->private = &sdmac->data;
|
|
|
|
return true;
|
|
}
|
|
|
|
static struct dma_chan *sdma_xlate(struct of_phandle_args *dma_spec,
|
|
struct of_dma *ofdma)
|
|
{
|
|
struct sdma_engine *sdma = ofdma->of_dma_data;
|
|
dma_cap_mask_t mask = sdma->dma_device.cap_mask;
|
|
struct imx_dma_data data;
|
|
|
|
if (dma_spec->args_count != 3)
|
|
return NULL;
|
|
|
|
data.dma_request = dma_spec->args[0];
|
|
data.peripheral_type = dma_spec->args[1];
|
|
data.priority = dma_spec->args[2];
|
|
/*
|
|
* init dma_request2 to zero, which is not used by the dts.
|
|
* For P2P, dma_request2 is init from dma_request_channel(),
|
|
* chan->private will point to the imx_dma_data, and in
|
|
* device_alloc_chan_resources(), imx_dma_data.dma_request2 will
|
|
* be set to sdmac->event_id1.
|
|
*/
|
|
data.dma_request2 = 0;
|
|
|
|
return __dma_request_channel(&mask, sdma_filter_fn, &data,
|
|
ofdma->of_node);
|
|
}
|
|
|
|
static int sdma_probe(struct platform_device *pdev)
|
|
{
|
|
struct device_node *np = pdev->dev.of_node;
|
|
struct device_node *spba_bus;
|
|
const char *fw_name;
|
|
int ret;
|
|
int irq;
|
|
struct resource *iores;
|
|
struct resource spba_res;
|
|
int i;
|
|
struct sdma_engine *sdma;
|
|
s32 *saddr_arr;
|
|
|
|
ret = dma_coerce_mask_and_coherent(&pdev->dev, DMA_BIT_MASK(32));
|
|
if (ret)
|
|
return ret;
|
|
|
|
sdma = devm_kzalloc(&pdev->dev, sizeof(*sdma), GFP_KERNEL);
|
|
if (!sdma)
|
|
return -ENOMEM;
|
|
|
|
spin_lock_init(&sdma->channel_0_lock);
|
|
|
|
sdma->dev = &pdev->dev;
|
|
sdma->drvdata = of_device_get_match_data(sdma->dev);
|
|
|
|
irq = platform_get_irq(pdev, 0);
|
|
if (irq < 0)
|
|
return irq;
|
|
|
|
iores = platform_get_resource(pdev, IORESOURCE_MEM, 0);
|
|
sdma->regs = devm_ioremap_resource(&pdev->dev, iores);
|
|
if (IS_ERR(sdma->regs))
|
|
return PTR_ERR(sdma->regs);
|
|
|
|
sdma->clk_ipg = devm_clk_get(&pdev->dev, "ipg");
|
|
if (IS_ERR(sdma->clk_ipg))
|
|
return PTR_ERR(sdma->clk_ipg);
|
|
|
|
sdma->clk_ahb = devm_clk_get(&pdev->dev, "ahb");
|
|
if (IS_ERR(sdma->clk_ahb))
|
|
return PTR_ERR(sdma->clk_ahb);
|
|
|
|
ret = clk_prepare(sdma->clk_ipg);
|
|
if (ret)
|
|
return ret;
|
|
|
|
ret = clk_prepare(sdma->clk_ahb);
|
|
if (ret)
|
|
goto err_clk;
|
|
|
|
ret = devm_request_irq(&pdev->dev, irq, sdma_int_handler, 0,
|
|
dev_name(&pdev->dev), sdma);
|
|
if (ret)
|
|
goto err_irq;
|
|
|
|
sdma->irq = irq;
|
|
|
|
sdma->script_addrs = kzalloc(sizeof(*sdma->script_addrs), GFP_KERNEL);
|
|
if (!sdma->script_addrs) {
|
|
ret = -ENOMEM;
|
|
goto err_irq;
|
|
}
|
|
|
|
/* initially no scripts available */
|
|
saddr_arr = (s32 *)sdma->script_addrs;
|
|
for (i = 0; i < sizeof(*sdma->script_addrs) / sizeof(s32); i++)
|
|
saddr_arr[i] = -EINVAL;
|
|
|
|
dma_cap_set(DMA_SLAVE, sdma->dma_device.cap_mask);
|
|
dma_cap_set(DMA_CYCLIC, sdma->dma_device.cap_mask);
|
|
dma_cap_set(DMA_MEMCPY, sdma->dma_device.cap_mask);
|
|
|
|
INIT_LIST_HEAD(&sdma->dma_device.channels);
|
|
/* Initialize channel parameters */
|
|
for (i = 0; i < MAX_DMA_CHANNELS; i++) {
|
|
struct sdma_channel *sdmac = &sdma->channel[i];
|
|
|
|
sdmac->sdma = sdma;
|
|
|
|
sdmac->channel = i;
|
|
sdmac->vc.desc_free = sdma_desc_free;
|
|
INIT_LIST_HEAD(&sdmac->terminated);
|
|
INIT_WORK(&sdmac->terminate_worker,
|
|
sdma_channel_terminate_work);
|
|
/*
|
|
* Add the channel to the DMAC list. Do not add channel 0 though
|
|
* because we need it internally in the SDMA driver. This also means
|
|
* that channel 0 in dmaengine counting matches sdma channel 1.
|
|
*/
|
|
if (i)
|
|
vchan_init(&sdmac->vc, &sdma->dma_device);
|
|
}
|
|
|
|
ret = sdma_init(sdma);
|
|
if (ret)
|
|
goto err_init;
|
|
|
|
ret = sdma_event_remap(sdma);
|
|
if (ret)
|
|
goto err_init;
|
|
|
|
if (sdma->drvdata->script_addrs)
|
|
sdma_add_scripts(sdma, sdma->drvdata->script_addrs);
|
|
|
|
sdma->dma_device.dev = &pdev->dev;
|
|
|
|
sdma->dma_device.device_alloc_chan_resources = sdma_alloc_chan_resources;
|
|
sdma->dma_device.device_free_chan_resources = sdma_free_chan_resources;
|
|
sdma->dma_device.device_tx_status = sdma_tx_status;
|
|
sdma->dma_device.device_prep_slave_sg = sdma_prep_slave_sg;
|
|
sdma->dma_device.device_prep_dma_cyclic = sdma_prep_dma_cyclic;
|
|
sdma->dma_device.device_config = sdma_config;
|
|
sdma->dma_device.device_terminate_all = sdma_terminate_all;
|
|
sdma->dma_device.device_synchronize = sdma_channel_synchronize;
|
|
sdma->dma_device.src_addr_widths = SDMA_DMA_BUSWIDTHS;
|
|
sdma->dma_device.dst_addr_widths = SDMA_DMA_BUSWIDTHS;
|
|
sdma->dma_device.directions = SDMA_DMA_DIRECTIONS;
|
|
sdma->dma_device.residue_granularity = DMA_RESIDUE_GRANULARITY_SEGMENT;
|
|
sdma->dma_device.device_prep_dma_memcpy = sdma_prep_memcpy;
|
|
sdma->dma_device.device_issue_pending = sdma_issue_pending;
|
|
sdma->dma_device.copy_align = 2;
|
|
dma_set_max_seg_size(sdma->dma_device.dev, SDMA_BD_MAX_CNT);
|
|
|
|
platform_set_drvdata(pdev, sdma);
|
|
|
|
ret = dma_async_device_register(&sdma->dma_device);
|
|
if (ret) {
|
|
dev_err(&pdev->dev, "unable to register\n");
|
|
goto err_init;
|
|
}
|
|
|
|
if (np) {
|
|
ret = of_dma_controller_register(np, sdma_xlate, sdma);
|
|
if (ret) {
|
|
dev_err(&pdev->dev, "failed to register controller\n");
|
|
goto err_register;
|
|
}
|
|
|
|
spba_bus = of_find_compatible_node(NULL, NULL, "fsl,spba-bus");
|
|
ret = of_address_to_resource(spba_bus, 0, &spba_res);
|
|
if (!ret) {
|
|
sdma->spba_start_addr = spba_res.start;
|
|
sdma->spba_end_addr = spba_res.end;
|
|
}
|
|
of_node_put(spba_bus);
|
|
}
|
|
|
|
/*
|
|
* Because that device tree does not encode ROM script address,
|
|
* the RAM script in firmware is mandatory for device tree
|
|
* probe, otherwise it fails.
|
|
*/
|
|
ret = of_property_read_string(np, "fsl,sdma-ram-script-name",
|
|
&fw_name);
|
|
if (ret) {
|
|
dev_warn(&pdev->dev, "failed to get firmware name\n");
|
|
} else {
|
|
ret = sdma_get_firmware(sdma, fw_name);
|
|
if (ret)
|
|
dev_warn(&pdev->dev, "failed to get firmware from device tree\n");
|
|
}
|
|
|
|
return 0;
|
|
|
|
err_register:
|
|
dma_async_device_unregister(&sdma->dma_device);
|
|
err_init:
|
|
kfree(sdma->script_addrs);
|
|
err_irq:
|
|
clk_unprepare(sdma->clk_ahb);
|
|
err_clk:
|
|
clk_unprepare(sdma->clk_ipg);
|
|
return ret;
|
|
}
|
|
|
|
static int sdma_remove(struct platform_device *pdev)
|
|
{
|
|
struct sdma_engine *sdma = platform_get_drvdata(pdev);
|
|
int i;
|
|
|
|
devm_free_irq(&pdev->dev, sdma->irq, sdma);
|
|
dma_async_device_unregister(&sdma->dma_device);
|
|
kfree(sdma->script_addrs);
|
|
clk_unprepare(sdma->clk_ahb);
|
|
clk_unprepare(sdma->clk_ipg);
|
|
/* Kill the tasklet */
|
|
for (i = 0; i < MAX_DMA_CHANNELS; i++) {
|
|
struct sdma_channel *sdmac = &sdma->channel[i];
|
|
|
|
tasklet_kill(&sdmac->vc.task);
|
|
sdma_free_chan_resources(&sdmac->vc.chan);
|
|
}
|
|
|
|
platform_set_drvdata(pdev, NULL);
|
|
return 0;
|
|
}
|
|
|
|
static struct platform_driver sdma_driver = {
|
|
.driver = {
|
|
.name = "imx-sdma",
|
|
.of_match_table = sdma_dt_ids,
|
|
},
|
|
.remove = sdma_remove,
|
|
.probe = sdma_probe,
|
|
};
|
|
|
|
module_platform_driver(sdma_driver);
|
|
|
|
MODULE_AUTHOR("Sascha Hauer, Pengutronix <s.hauer@pengutronix.de>");
|
|
MODULE_DESCRIPTION("i.MX SDMA driver");
|
|
#if IS_ENABLED(CONFIG_SOC_IMX6Q)
|
|
MODULE_FIRMWARE("imx/sdma/sdma-imx6q.bin");
|
|
#endif
|
|
#if IS_ENABLED(CONFIG_SOC_IMX7D) || IS_ENABLED(CONFIG_SOC_IMX8M)
|
|
MODULE_FIRMWARE("imx/sdma/sdma-imx7d.bin");
|
|
#endif
|
|
MODULE_LICENSE("GPL");
|