linuxdebug/arch/x86/kvm/svm/vmenter.S

393 lines
9.2 KiB
ArmAsm

/* SPDX-License-Identifier: GPL-2.0 */
#include <linux/linkage.h>
#include <asm/asm.h>
#include <asm/bitsperlong.h>
#include <asm/kvm_vcpu_regs.h>
#include <asm/nospec-branch.h>
#include "kvm-asm-offsets.h"
#define WORD_SIZE (BITS_PER_LONG / 8)
/* Intentionally omit RAX as it's context switched by hardware */
#define VCPU_RCX (SVM_vcpu_arch_regs + __VCPU_REGS_RCX * WORD_SIZE)
#define VCPU_RDX (SVM_vcpu_arch_regs + __VCPU_REGS_RDX * WORD_SIZE)
#define VCPU_RBX (SVM_vcpu_arch_regs + __VCPU_REGS_RBX * WORD_SIZE)
/* Intentionally omit RSP as it's context switched by hardware */
#define VCPU_RBP (SVM_vcpu_arch_regs + __VCPU_REGS_RBP * WORD_SIZE)
#define VCPU_RSI (SVM_vcpu_arch_regs + __VCPU_REGS_RSI * WORD_SIZE)
#define VCPU_RDI (SVM_vcpu_arch_regs + __VCPU_REGS_RDI * WORD_SIZE)
#ifdef CONFIG_X86_64
#define VCPU_R8 (SVM_vcpu_arch_regs + __VCPU_REGS_R8 * WORD_SIZE)
#define VCPU_R9 (SVM_vcpu_arch_regs + __VCPU_REGS_R9 * WORD_SIZE)
#define VCPU_R10 (SVM_vcpu_arch_regs + __VCPU_REGS_R10 * WORD_SIZE)
#define VCPU_R11 (SVM_vcpu_arch_regs + __VCPU_REGS_R11 * WORD_SIZE)
#define VCPU_R12 (SVM_vcpu_arch_regs + __VCPU_REGS_R12 * WORD_SIZE)
#define VCPU_R13 (SVM_vcpu_arch_regs + __VCPU_REGS_R13 * WORD_SIZE)
#define VCPU_R14 (SVM_vcpu_arch_regs + __VCPU_REGS_R14 * WORD_SIZE)
#define VCPU_R15 (SVM_vcpu_arch_regs + __VCPU_REGS_R15 * WORD_SIZE)
#endif
#define SVM_vmcb01_pa (SVM_vmcb01 + KVM_VMCB_pa)
.section .noinstr.text, "ax"
.macro RESTORE_GUEST_SPEC_CTRL
/* No need to do anything if SPEC_CTRL is unset or V_SPEC_CTRL is set */
ALTERNATIVE_2 "", \
"jmp 800f", X86_FEATURE_MSR_SPEC_CTRL, \
"", X86_FEATURE_V_SPEC_CTRL
801:
.endm
.macro RESTORE_GUEST_SPEC_CTRL_BODY
800:
/*
* SPEC_CTRL handling: if the guest's SPEC_CTRL value differs from the
* host's, write the MSR. This is kept out-of-line so that the common
* case does not have to jump.
*
* IMPORTANT: To avoid RSB underflow attacks and any other nastiness,
* there must not be any returns or indirect branches between this code
* and vmentry.
*/
movl SVM_spec_ctrl(%_ASM_DI), %eax
cmp PER_CPU_VAR(x86_spec_ctrl_current), %eax
je 801b
mov $MSR_IA32_SPEC_CTRL, %ecx
xor %edx, %edx
wrmsr
jmp 801b
.endm
.macro RESTORE_HOST_SPEC_CTRL
/* No need to do anything if SPEC_CTRL is unset or V_SPEC_CTRL is set */
ALTERNATIVE_2 "", \
"jmp 900f", X86_FEATURE_MSR_SPEC_CTRL, \
"", X86_FEATURE_V_SPEC_CTRL
901:
.endm
.macro RESTORE_HOST_SPEC_CTRL_BODY
900:
/* Same for after vmexit. */
mov $MSR_IA32_SPEC_CTRL, %ecx
/*
* Load the value that the guest had written into MSR_IA32_SPEC_CTRL,
* if it was not intercepted during guest execution.
*/
cmpb $0, (%_ASM_SP)
jnz 998f
rdmsr
movl %eax, SVM_spec_ctrl(%_ASM_DI)
998:
/* Now restore the host value of the MSR if different from the guest's. */
movl PER_CPU_VAR(x86_spec_ctrl_current), %eax
cmp SVM_spec_ctrl(%_ASM_DI), %eax
je 901b
xor %edx, %edx
wrmsr
jmp 901b
.endm
/**
* __svm_vcpu_run - Run a vCPU via a transition to SVM guest mode
* @svm: struct vcpu_svm *
* @spec_ctrl_intercepted: bool
*/
SYM_FUNC_START(__svm_vcpu_run)
push %_ASM_BP
#ifdef CONFIG_X86_64
push %r15
push %r14
push %r13
push %r12
#else
push %edi
push %esi
#endif
push %_ASM_BX
/*
* Save variables needed after vmexit on the stack, in inverse
* order compared to when they are needed.
*/
/* Accessed directly from the stack in RESTORE_HOST_SPEC_CTRL. */
push %_ASM_ARG2
/* Needed to restore access to percpu variables. */
__ASM_SIZE(push) PER_CPU_VAR(svm_data + SD_save_area_pa)
/* Finally save @svm. */
push %_ASM_ARG1
.ifnc _ASM_ARG1, _ASM_DI
/*
* Stash @svm in RDI early. On 32-bit, arguments are in RAX, RCX
* and RDX which are clobbered by RESTORE_GUEST_SPEC_CTRL.
*/
mov %_ASM_ARG1, %_ASM_DI
.endif
/* Clobbers RAX, RCX, RDX. */
RESTORE_GUEST_SPEC_CTRL
/*
* Use a single vmcb (vmcb01 because it's always valid) for
* context switching guest state via VMLOAD/VMSAVE, that way
* the state doesn't need to be copied between vmcb01 and
* vmcb02 when switching vmcbs for nested virtualization.
*/
mov SVM_vmcb01_pa(%_ASM_DI), %_ASM_AX
1: vmload %_ASM_AX
2:
/* Get svm->current_vmcb->pa into RAX. */
mov SVM_current_vmcb(%_ASM_DI), %_ASM_AX
mov KVM_VMCB_pa(%_ASM_AX), %_ASM_AX
/* Load guest registers. */
mov VCPU_RCX(%_ASM_DI), %_ASM_CX
mov VCPU_RDX(%_ASM_DI), %_ASM_DX
mov VCPU_RBX(%_ASM_DI), %_ASM_BX
mov VCPU_RBP(%_ASM_DI), %_ASM_BP
mov VCPU_RSI(%_ASM_DI), %_ASM_SI
#ifdef CONFIG_X86_64
mov VCPU_R8 (%_ASM_DI), %r8
mov VCPU_R9 (%_ASM_DI), %r9
mov VCPU_R10(%_ASM_DI), %r10
mov VCPU_R11(%_ASM_DI), %r11
mov VCPU_R12(%_ASM_DI), %r12
mov VCPU_R13(%_ASM_DI), %r13
mov VCPU_R14(%_ASM_DI), %r14
mov VCPU_R15(%_ASM_DI), %r15
#endif
mov VCPU_RDI(%_ASM_DI), %_ASM_DI
/* Enter guest mode */
sti
3: vmrun %_ASM_AX
4:
cli
/* Pop @svm to RAX while it's the only available register. */
pop %_ASM_AX
/* Save all guest registers. */
mov %_ASM_CX, VCPU_RCX(%_ASM_AX)
mov %_ASM_DX, VCPU_RDX(%_ASM_AX)
mov %_ASM_BX, VCPU_RBX(%_ASM_AX)
mov %_ASM_BP, VCPU_RBP(%_ASM_AX)
mov %_ASM_SI, VCPU_RSI(%_ASM_AX)
mov %_ASM_DI, VCPU_RDI(%_ASM_AX)
#ifdef CONFIG_X86_64
mov %r8, VCPU_R8 (%_ASM_AX)
mov %r9, VCPU_R9 (%_ASM_AX)
mov %r10, VCPU_R10(%_ASM_AX)
mov %r11, VCPU_R11(%_ASM_AX)
mov %r12, VCPU_R12(%_ASM_AX)
mov %r13, VCPU_R13(%_ASM_AX)
mov %r14, VCPU_R14(%_ASM_AX)
mov %r15, VCPU_R15(%_ASM_AX)
#endif
/* @svm can stay in RDI from now on. */
mov %_ASM_AX, %_ASM_DI
mov SVM_vmcb01_pa(%_ASM_DI), %_ASM_AX
5: vmsave %_ASM_AX
6:
/* Restores GSBASE among other things, allowing access to percpu data. */
pop %_ASM_AX
7: vmload %_ASM_AX
8:
#ifdef CONFIG_RETPOLINE
/* IMPORTANT: Stuff the RSB immediately after VM-Exit, before RET! */
FILL_RETURN_BUFFER %_ASM_AX, RSB_CLEAR_LOOPS, X86_FEATURE_RETPOLINE
#endif
/* Clobbers RAX, RCX, RDX. */
RESTORE_HOST_SPEC_CTRL
/*
* Mitigate RETBleed for AMD/Hygon Zen uarch. RET should be
* untrained as soon as we exit the VM and are back to the
* kernel. This should be done before re-enabling interrupts
* because interrupt handlers won't sanitize 'ret' if the return is
* from the kernel.
*/
UNTRAIN_RET
/* SRSO */
ALTERNATIVE "", "call entry_ibpb", X86_FEATURE_IBPB_ON_VMEXIT
/*
* Clear all general purpose registers except RSP and RAX to prevent
* speculative use of the guest's values, even those that are reloaded
* via the stack. In theory, an L1 cache miss when restoring registers
* could lead to speculative execution with the guest's values.
* Zeroing XORs are dirt cheap, i.e. the extra paranoia is essentially
* free. RSP and RAX are exempt as they are restored by hardware
* during VM-Exit.
*/
xor %ecx, %ecx
xor %edx, %edx
xor %ebx, %ebx
xor %ebp, %ebp
xor %esi, %esi
xor %edi, %edi
#ifdef CONFIG_X86_64
xor %r8d, %r8d
xor %r9d, %r9d
xor %r10d, %r10d
xor %r11d, %r11d
xor %r12d, %r12d
xor %r13d, %r13d
xor %r14d, %r14d
xor %r15d, %r15d
#endif
/* "Pop" @spec_ctrl_intercepted. */
pop %_ASM_BX
pop %_ASM_BX
#ifdef CONFIG_X86_64
pop %r12
pop %r13
pop %r14
pop %r15
#else
pop %esi
pop %edi
#endif
pop %_ASM_BP
RET
RESTORE_GUEST_SPEC_CTRL_BODY
RESTORE_HOST_SPEC_CTRL_BODY
10: cmpb $0, kvm_rebooting
jne 2b
ud2
30: cmpb $0, kvm_rebooting
jne 4b
ud2
50: cmpb $0, kvm_rebooting
jne 6b
ud2
70: cmpb $0, kvm_rebooting
jne 8b
ud2
_ASM_EXTABLE(1b, 10b)
_ASM_EXTABLE(3b, 30b)
_ASM_EXTABLE(5b, 50b)
_ASM_EXTABLE(7b, 70b)
SYM_FUNC_END(__svm_vcpu_run)
/**
* __svm_sev_es_vcpu_run - Run a SEV-ES vCPU via a transition to SVM guest mode
* @svm: struct vcpu_svm *
* @spec_ctrl_intercepted: bool
*/
SYM_FUNC_START(__svm_sev_es_vcpu_run)
push %_ASM_BP
#ifdef CONFIG_X86_64
push %r15
push %r14
push %r13
push %r12
#else
push %edi
push %esi
#endif
push %_ASM_BX
/*
* Save variables needed after vmexit on the stack, in inverse
* order compared to when they are needed.
*/
/* Accessed directly from the stack in RESTORE_HOST_SPEC_CTRL. */
push %_ASM_ARG2
/* Save @svm. */
push %_ASM_ARG1
.ifnc _ASM_ARG1, _ASM_DI
/*
* Stash @svm in RDI early. On 32-bit, arguments are in RAX, RCX
* and RDX which are clobbered by RESTORE_GUEST_SPEC_CTRL.
*/
mov %_ASM_ARG1, %_ASM_DI
.endif
/* Clobbers RAX, RCX, RDX. */
RESTORE_GUEST_SPEC_CTRL
/* Get svm->current_vmcb->pa into RAX. */
mov SVM_current_vmcb(%_ASM_DI), %_ASM_AX
mov KVM_VMCB_pa(%_ASM_AX), %_ASM_AX
/* Enter guest mode */
sti
1: vmrun %_ASM_AX
2: cli
/* Pop @svm to RDI, guest registers have been saved already. */
pop %_ASM_DI
#ifdef CONFIG_RETPOLINE
/* IMPORTANT: Stuff the RSB immediately after VM-Exit, before RET! */
FILL_RETURN_BUFFER %_ASM_AX, RSB_CLEAR_LOOPS, X86_FEATURE_RETPOLINE
#endif
/* Clobbers RAX, RCX, RDX. */
RESTORE_HOST_SPEC_CTRL
/*
* Mitigate RETBleed for AMD/Hygon Zen uarch. RET should be
* untrained as soon as we exit the VM and are back to the
* kernel. This should be done before re-enabling interrupts
* because interrupt handlers won't sanitize RET if the return is
* from the kernel.
*/
UNTRAIN_RET
/* "Pop" @spec_ctrl_intercepted. */
pop %_ASM_BX
pop %_ASM_BX
#ifdef CONFIG_X86_64
pop %r12
pop %r13
pop %r14
pop %r15
#else
pop %esi
pop %edi
#endif
pop %_ASM_BP
RET
RESTORE_GUEST_SPEC_CTRL_BODY
RESTORE_HOST_SPEC_CTRL_BODY
3: cmpb $0, kvm_rebooting
jne 2b
ud2
_ASM_EXTABLE(1b, 3b)
SYM_FUNC_END(__svm_sev_es_vcpu_run)