740 lines
15 KiB
Plaintext
740 lines
15 KiB
Plaintext
// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
|
|
|
|
/dts-v1/;
|
|
|
|
#include <dt-bindings/gpio/gpio.h>
|
|
#include <dt-bindings/pinctrl/rockchip.h>
|
|
#include <dt-bindings/soc/rockchip,vop2.h>
|
|
#include "rk3566.dtsi"
|
|
|
|
/ {
|
|
model = "Pine64 RK3566 Quartz64-B Board";
|
|
compatible = "pine64,quartz64-b", "rockchip,rk3566";
|
|
|
|
aliases {
|
|
ethernet0 = &gmac1;
|
|
mmc0 = &sdmmc0;
|
|
mmc1 = &sdhci;
|
|
mmc2 = &sdmmc1;
|
|
};
|
|
|
|
chosen: chosen {
|
|
stdout-path = "serial2:1500000n8";
|
|
};
|
|
|
|
gmac1_clkin: external-gmac1-clock {
|
|
compatible = "fixed-clock";
|
|
clock-frequency = <125000000>;
|
|
clock-output-names = "gmac1_clkin";
|
|
#clock-cells = <0>;
|
|
};
|
|
|
|
hdmi-con {
|
|
compatible = "hdmi-connector";
|
|
type = "a";
|
|
|
|
port {
|
|
hdmi_con_in: endpoint {
|
|
remote-endpoint = <&hdmi_out_con>;
|
|
};
|
|
};
|
|
};
|
|
|
|
leds {
|
|
compatible = "gpio-leds";
|
|
|
|
led-user {
|
|
label = "user-led";
|
|
default-state = "on";
|
|
gpios = <&gpio0 RK_PA0 GPIO_ACTIVE_HIGH>;
|
|
linux,default-trigger = "heartbeat";
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&user_led_enable_h>;
|
|
retain-state-suspended;
|
|
};
|
|
};
|
|
|
|
sound {
|
|
compatible = "simple-audio-card";
|
|
simple-audio-card,format = "i2s";
|
|
simple-audio-card,name = "Analog RK809";
|
|
simple-audio-card,mclk-fs = <256>;
|
|
|
|
simple-audio-card,cpu {
|
|
sound-dai = <&i2s1_8ch>;
|
|
};
|
|
|
|
simple-audio-card,codec {
|
|
sound-dai = <&rk809>;
|
|
};
|
|
};
|
|
|
|
sdio_pwrseq: sdio-pwrseq {
|
|
status = "okay";
|
|
compatible = "mmc-pwrseq-simple";
|
|
clocks = <&rk809 1>;
|
|
clock-names = "ext_clock";
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&wifi_enable_h>;
|
|
reset-gpios = <&gpio0 RK_PC0 GPIO_ACTIVE_LOW>;
|
|
post-power-on-delay-ms = <100>;
|
|
power-off-delay-us = <5000000>;
|
|
};
|
|
|
|
vcc3v3_pcie_p: vcc3v3-pcie-p-regulator {
|
|
compatible = "regulator-fixed";
|
|
enable-active-high;
|
|
gpio = <&gpio0 RK_PA6 GPIO_ACTIVE_HIGH>;
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&pcie_enable_h>;
|
|
regulator-name = "vcc3v3_pcie_p";
|
|
regulator-min-microvolt = <3300000>;
|
|
regulator-max-microvolt = <3300000>;
|
|
vin-supply = <&vcc_3v3>;
|
|
};
|
|
|
|
vcc5v0_in: vcc5v0-in-regulator {
|
|
compatible = "regulator-fixed";
|
|
regulator-name = "vcc5v0_in";
|
|
regulator-always-on;
|
|
regulator-boot-on;
|
|
regulator-min-microvolt = <5000000>;
|
|
regulator-max-microvolt = <5000000>;
|
|
};
|
|
|
|
vcc5v0_sys: vcc5v0-sys-regulator {
|
|
compatible = "regulator-fixed";
|
|
regulator-name = "vcc5v0_sys";
|
|
regulator-always-on;
|
|
regulator-boot-on;
|
|
regulator-min-microvolt = <5000000>;
|
|
regulator-max-microvolt = <5000000>;
|
|
vin-supply = <&vcc5v0_in>;
|
|
};
|
|
|
|
vcc3v3_sys: vcc3v3-sys-regulator {
|
|
compatible = "regulator-fixed";
|
|
regulator-name = "vcc3v3_sys";
|
|
regulator-min-microvolt = <3300000>;
|
|
regulator-max-microvolt = <3300000>;
|
|
regulator-always-on;
|
|
vin-supply = <&vcc5v0_sys>;
|
|
};
|
|
|
|
vcc5v0_usb30_host: vcc5v0-usb30-host-regulator {
|
|
compatible = "regulator-fixed";
|
|
regulator-name = "vcc5v0_usb30_host";
|
|
enable-active-high;
|
|
gpio = <&gpio0 RK_PC5 GPIO_ACTIVE_HIGH>;
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&vcc5v0_usb30_host_en_h>;
|
|
regulator-always-on;
|
|
regulator-min-microvolt = <5000000>;
|
|
regulator-max-microvolt = <5000000>;
|
|
vin-supply = <&vcc5v0_sys>;
|
|
};
|
|
|
|
vcc5v0_usb_otg: vcc5v0-usb-otg-regulator {
|
|
compatible = "regulator-fixed";
|
|
regulator-name = "vcc5v0_usb_otg";
|
|
enable-active-high;
|
|
gpio = <&gpio0 RK_PC6 GPIO_ACTIVE_HIGH>;
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&vcc5v0_usb_otg_en_h>;
|
|
regulator-always-on;
|
|
regulator-min-microvolt = <5000000>;
|
|
regulator-max-microvolt = <5000000>;
|
|
vin-supply = <&vcc5v0_sys>;
|
|
};
|
|
};
|
|
|
|
&combphy1 {
|
|
status = "okay";
|
|
};
|
|
|
|
&combphy2 {
|
|
status = "okay";
|
|
};
|
|
|
|
&cpu0 {
|
|
cpu-supply = <&vdd_cpu>;
|
|
};
|
|
|
|
&cpu1 {
|
|
cpu-supply = <&vdd_cpu>;
|
|
};
|
|
|
|
&cpu2 {
|
|
cpu-supply = <&vdd_cpu>;
|
|
};
|
|
|
|
&cpu3 {
|
|
cpu-supply = <&vdd_cpu>;
|
|
};
|
|
|
|
&gmac1 {
|
|
assigned-clocks = <&cru SCLK_GMAC1_RX_TX>, <&cru SCLK_GMAC1_RGMII_SPEED>, <&cru SCLK_GMAC1>;
|
|
assigned-clock-parents = <&cru SCLK_GMAC1_RGMII_SPEED>, <&cru SCLK_GMAC1>, <&gmac1_clkin>;
|
|
clock_in_out = "input";
|
|
phy-mode = "rgmii";
|
|
phy-supply = <&vcc_3v3>;
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&gmac1m1_miim
|
|
&gmac1m1_tx_bus2
|
|
&gmac1m1_rx_bus2
|
|
&gmac1m1_rgmii_clk
|
|
&gmac1m1_clkinout
|
|
&gmac1m1_rgmii_bus>;
|
|
snps,reset-gpio = <&gpio3 RK_PC0 GPIO_ACTIVE_LOW>;
|
|
snps,reset-active-low;
|
|
/* Reset time is 20ms, 100ms for rtl8211f, also works well here */
|
|
snps,reset-delays-us = <0 20000 100000>;
|
|
tx_delay = <0x4f>;
|
|
rx_delay = <0x24>;
|
|
phy-handle = <&rgmii_phy1>;
|
|
status = "okay";
|
|
};
|
|
|
|
&gpu {
|
|
mali-supply = <&vdd_gpu>;
|
|
status = "okay";
|
|
};
|
|
|
|
&hdmi {
|
|
avdd-0v9-supply = <&vdda0v9_image>;
|
|
avdd-1v8-supply = <&vcca1v8_image>;
|
|
status = "okay";
|
|
};
|
|
|
|
&hdmi_in {
|
|
hdmi_in_vp0: endpoint {
|
|
remote-endpoint = <&vp0_out_hdmi>;
|
|
};
|
|
};
|
|
|
|
&hdmi_out {
|
|
hdmi_out_con: endpoint {
|
|
remote-endpoint = <&hdmi_con_in>;
|
|
};
|
|
};
|
|
|
|
&hdmi_sound {
|
|
status = "okay";
|
|
};
|
|
|
|
&i2c0 {
|
|
status = "okay";
|
|
|
|
vdd_cpu: regulator@1c {
|
|
compatible = "tcs,tcs4525";
|
|
reg = <0x1c>;
|
|
fcs,suspend-voltage-selector = <1>;
|
|
regulator-name = "vdd_cpu";
|
|
regulator-min-microvolt = <800000>;
|
|
regulator-max-microvolt = <1150000>;
|
|
regulator-ramp-delay = <2300>;
|
|
regulator-always-on;
|
|
regulator-boot-on;
|
|
vin-supply = <&vcc5v0_sys>;
|
|
|
|
regulator-state-mem {
|
|
regulator-off-in-suspend;
|
|
};
|
|
};
|
|
|
|
rk809: pmic@20 {
|
|
compatible = "rockchip,rk809";
|
|
reg = <0x20>;
|
|
interrupt-parent = <&gpio0>;
|
|
interrupts = <RK_PA3 IRQ_TYPE_LEVEL_LOW>;
|
|
assigned-clocks = <&cru I2S1_MCLKOUT_TX>;
|
|
assigned-clock-parents = <&cru CLK_I2S1_8CH_TX>;
|
|
clock-names = "mclk";
|
|
clocks = <&cru I2S1_MCLKOUT_TX>;
|
|
clock-output-names = "rk808-clkout1", "rk808-clkout2";
|
|
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&pmic_int>, <&i2s1m0_mclk>;
|
|
rockchip,system-power-controller;
|
|
#sound-dai-cells = <0>;
|
|
wakeup-source;
|
|
#clock-cells = <1>;
|
|
|
|
vcc1-supply = <&vcc3v3_sys>;
|
|
vcc2-supply = <&vcc3v3_sys>;
|
|
vcc3-supply = <&vcc3v3_sys>;
|
|
vcc4-supply = <&vcc3v3_sys>;
|
|
vcc5-supply = <&vcc3v3_sys>;
|
|
vcc6-supply = <&vcc3v3_sys>;
|
|
vcc7-supply = <&vcc3v3_sys>;
|
|
vcc8-supply = <&vcc3v3_sys>;
|
|
vcc9-supply = <&vcc3v3_sys>;
|
|
|
|
regulators {
|
|
vdd_log: DCDC_REG1 {
|
|
regulator-name = "vdd_log";
|
|
regulator-always-on;
|
|
regulator-boot-on;
|
|
regulator-min-microvolt = <500000>;
|
|
regulator-max-microvolt = <1350000>;
|
|
regulator-init-microvolt = <900000>;
|
|
regulator-ramp-delay = <6001>;
|
|
|
|
regulator-state-mem {
|
|
regulator-on-in-suspend;
|
|
regulator-suspend-microvolt = <900000>;
|
|
};
|
|
};
|
|
|
|
vdd_gpu: DCDC_REG2 {
|
|
regulator-name = "vdd_gpu";
|
|
regulator-always-on;
|
|
regulator-boot-on;
|
|
regulator-min-microvolt = <900000>;
|
|
regulator-max-microvolt = <1350000>;
|
|
regulator-init-microvolt = <900000>;
|
|
regulator-ramp-delay = <6001>;
|
|
|
|
regulator-state-mem {
|
|
regulator-off-in-suspend;
|
|
regulator-suspend-microvolt = <900000>;
|
|
};
|
|
};
|
|
|
|
vcc_ddr: DCDC_REG3 {
|
|
regulator-name = "vcc_ddr";
|
|
regulator-always-on;
|
|
regulator-boot-on;
|
|
regulator-initial-mode = <0x2>;
|
|
regulator-state-mem {
|
|
regulator-on-in-suspend;
|
|
};
|
|
};
|
|
|
|
vdd_npu: DCDC_REG4 {
|
|
regulator-name = "vdd_npu";
|
|
regulator-min-microvolt = <900000>;
|
|
regulator-max-microvolt = <1350000>;
|
|
regulator-initial-mode = <0x2>;
|
|
regulator-state-mem {
|
|
regulator-off-in-suspend;
|
|
};
|
|
};
|
|
|
|
vcc_1v8: DCDC_REG5 {
|
|
regulator-name = "vcc_1v8";
|
|
regulator-always-on;
|
|
regulator-boot-on;
|
|
regulator-min-microvolt = <1800000>;
|
|
regulator-max-microvolt = <1800000>;
|
|
|
|
regulator-state-mem {
|
|
regulator-on-in-suspend;
|
|
regulator-suspend-microvolt = <1800000>;
|
|
};
|
|
};
|
|
|
|
vdda0v9_image: LDO_REG1 {
|
|
regulator-name = "vdda0v9_image";
|
|
regulator-always-on;
|
|
regulator-boot-on;
|
|
regulator-min-microvolt = <900000>;
|
|
regulator-max-microvolt = <900000>;
|
|
|
|
regulator-state-mem {
|
|
regulator-on-in-suspend;
|
|
regulator-suspend-microvolt = <900000>;
|
|
};
|
|
};
|
|
|
|
vdda_0v9: LDO_REG2 {
|
|
regulator-name = "vdda_0v9";
|
|
regulator-always-on;
|
|
regulator-boot-on;
|
|
regulator-min-microvolt = <900000>;
|
|
regulator-max-microvolt = <900000>;
|
|
|
|
regulator-state-mem {
|
|
regulator-on-in-suspend;
|
|
regulator-suspend-microvolt = <900000>;
|
|
};
|
|
};
|
|
|
|
vdda0v9_pmu: LDO_REG3 {
|
|
regulator-name = "vdda0v9_pmu";
|
|
regulator-always-on;
|
|
regulator-boot-on;
|
|
regulator-min-microvolt = <900000>;
|
|
regulator-max-microvolt = <900000>;
|
|
regulator-state-mem {
|
|
regulator-on-in-suspend;
|
|
regulator-suspend-microvolt = <900000>;
|
|
};
|
|
};
|
|
|
|
vccio_acodec: LDO_REG4 {
|
|
regulator-name = "vccio_acodec";
|
|
regulator-always-on;
|
|
regulator-boot-on;
|
|
regulator-min-microvolt = <3300000>;
|
|
regulator-max-microvolt = <3300000>;
|
|
|
|
regulator-state-mem {
|
|
regulator-on-in-suspend;
|
|
regulator-suspend-microvolt = <3300000>;
|
|
|
|
};
|
|
};
|
|
|
|
vccio_sd: LDO_REG5 {
|
|
regulator-name = "vccio_sd";
|
|
regulator-always-on;
|
|
regulator-boot-on;
|
|
regulator-min-microvolt = <1800000>;
|
|
regulator-max-microvolt = <3300000>;
|
|
|
|
regulator-state-mem {
|
|
regulator-on-in-suspend;
|
|
regulator-suspend-microvolt = <3300000>;
|
|
};
|
|
};
|
|
|
|
vcc3v3_pmu: LDO_REG6 {
|
|
regulator-name = "vcc3v3_pmu";
|
|
regulator-always-on;
|
|
regulator-boot-on;
|
|
regulator-min-microvolt = <3300000>;
|
|
regulator-max-microvolt = <3300000>;
|
|
|
|
regulator-state-mem {
|
|
regulator-on-in-suspend;
|
|
regulator-suspend-microvolt = <3300000>;
|
|
};
|
|
};
|
|
|
|
vcca_1v8: LDO_REG7 {
|
|
regulator-name = "vcca_1v8";
|
|
regulator-always-on;
|
|
regulator-boot-on;
|
|
regulator-min-microvolt = <1800000>;
|
|
regulator-max-microvolt = <1800000>;
|
|
|
|
regulator-state-mem {
|
|
regulator-on-in-suspend;
|
|
regulator-suspend-microvolt = <1800000>;
|
|
};
|
|
};
|
|
|
|
vcca1v8_pmu: LDO_REG8 {
|
|
regulator-name = "vcca1v8_pmu";
|
|
regulator-always-on;
|
|
regulator-boot-on;
|
|
regulator-min-microvolt = <1800000>;
|
|
regulator-max-microvolt = <1800000>;
|
|
|
|
regulator-state-mem {
|
|
regulator-on-in-suspend;
|
|
regulator-suspend-microvolt = <1800000>;
|
|
};
|
|
};
|
|
|
|
vcca1v8_image: LDO_REG9 {
|
|
regulator-name = "vcca1v8_image";
|
|
regulator-always-on;
|
|
regulator-boot-on;
|
|
regulator-min-microvolt = <1800000>;
|
|
regulator-max-microvolt = <1800000>;
|
|
|
|
regulator-state-mem {
|
|
regulator-on-in-suspend;
|
|
regulator-suspend-microvolt = <1800000>;
|
|
};
|
|
};
|
|
|
|
vcc_3v3: SWITCH_REG1 {
|
|
regulator-boot-on;
|
|
regulator-name = "vcc_3v3";
|
|
};
|
|
|
|
vcc3v3_sd: SWITCH_REG2 {
|
|
regulator-name = "vcc3v3_sd";
|
|
};
|
|
};
|
|
};
|
|
};
|
|
|
|
/* i2c2_m1 exposed on csi port, pulled up to vcc_3v3 */
|
|
&i2c2 {
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&i2c2m1_xfer>;
|
|
status = "okay";
|
|
};
|
|
|
|
/* i2c3_m1 exposed on dsi port, pulled up to vcc_3v3 */
|
|
&i2c3 {
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&i2c3m1_xfer>;
|
|
status = "okay";
|
|
};
|
|
|
|
/*
|
|
* i2c4_m0 is exposed on PI40, pulled up to vcc_3v3
|
|
* pin 27 - i2c4_sda_m0
|
|
* pin 28 - i2c4_scl_m0
|
|
*/
|
|
&i2c4 {
|
|
status = "okay";
|
|
};
|
|
|
|
/*
|
|
* i2c5_m0 is exposed on PI40
|
|
* pin 29 - i2c5_scl_m0
|
|
* pin 31 - i2c5_sda_m0
|
|
*/
|
|
&i2c5 {
|
|
status = "disabled";
|
|
};
|
|
|
|
&i2s0_8ch {
|
|
status = "okay";
|
|
};
|
|
|
|
&i2s1_8ch {
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&i2s1m0_sclktx
|
|
&i2s1m0_lrcktx
|
|
&i2s1m0_sdi0
|
|
&i2s1m0_sdo0>;
|
|
rockchip,trcm-sync-tx-only;
|
|
status = "okay";
|
|
};
|
|
|
|
&mdio1 {
|
|
rgmii_phy1: ethernet-phy@1 {
|
|
compatible = "ethernet-phy-ieee802.3-c22";
|
|
reg = <0x1>;
|
|
};
|
|
};
|
|
|
|
&pcie2x1 {
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&pcie_reset_h>;
|
|
reset-gpios = <&gpio1 RK_PB2 GPIO_ACTIVE_HIGH>;
|
|
vpcie3v3-supply = <&vcc3v3_pcie_p>;
|
|
status = "okay";
|
|
};
|
|
|
|
&pinctrl {
|
|
bt {
|
|
bt_enable_h: bt-enable-h {
|
|
rockchip,pins = <0 RK_PC1 RK_FUNC_GPIO &pcfg_pull_none>;
|
|
};
|
|
|
|
bt_host_wake_l: bt-host-wake-l {
|
|
rockchip,pins = <0 RK_PB3 RK_FUNC_GPIO &pcfg_pull_down>;
|
|
};
|
|
|
|
bt_wake_l: bt-wake-l {
|
|
rockchip,pins = <0 RK_PB4 RK_FUNC_GPIO &pcfg_pull_none>;
|
|
};
|
|
};
|
|
|
|
leds {
|
|
user_led_enable_h: user-led-enable-h {
|
|
rockchip,pins = <0 RK_PA0 RK_FUNC_GPIO &pcfg_pull_none>;
|
|
};
|
|
};
|
|
|
|
pcie {
|
|
pcie_enable_h: pcie-enable-h {
|
|
rockchip,pins = <0 RK_PA6 RK_FUNC_GPIO &pcfg_pull_none>;
|
|
};
|
|
|
|
pcie_reset_h: pcie-reset-h {
|
|
rockchip,pins = <1 RK_PB2 RK_FUNC_GPIO &pcfg_pull_none>;
|
|
};
|
|
};
|
|
|
|
pmic {
|
|
pmic_int: pmic_int {
|
|
rockchip,pins =
|
|
<0 RK_PA3 RK_FUNC_GPIO &pcfg_pull_up>;
|
|
};
|
|
};
|
|
|
|
sdio-pwrseq {
|
|
wifi_enable_h: wifi-enable-h {
|
|
rockchip,pins = <0 RK_PC0 RK_FUNC_GPIO &pcfg_pull_none>;
|
|
};
|
|
};
|
|
|
|
usb {
|
|
vcc5v0_usb30_host_en_h: vcc5v0-usb30-host-en_h {
|
|
rockchip,pins = <0 RK_PC5 RK_FUNC_GPIO &pcfg_pull_none>;
|
|
};
|
|
|
|
vcc5v0_usb_otg_en_h: vcc5v0-usb-otg-en_h {
|
|
rockchip,pins = <0 RK_PC6 RK_FUNC_GPIO &pcfg_pull_none>;
|
|
};
|
|
};
|
|
};
|
|
|
|
&pmu_io_domains {
|
|
status = "okay";
|
|
pmuio1-supply = <&vcc3v3_pmu>;
|
|
pmuio2-supply = <&vcca1v8_pmu>;
|
|
vccio1-supply = <&vccio_acodec>;
|
|
vccio2-supply = <&vcc_1v8>;
|
|
vccio3-supply = <&vccio_sd>;
|
|
vccio4-supply = <&vcca1v8_pmu>;
|
|
vccio5-supply = <&vcc_3v3>;
|
|
vccio6-supply = <&vcc_3v3>;
|
|
vccio7-supply = <&vcc_3v3>;
|
|
};
|
|
|
|
&saradc {
|
|
vref-supply = <&vcca_1v8>;
|
|
status = "okay";
|
|
};
|
|
|
|
&sdhci {
|
|
bus-width = <8>;
|
|
mmc-hs200-1_8v;
|
|
non-removable;
|
|
vmmc-supply = <&vcc_3v3>;
|
|
vqmmc-supply = <&vcc_1v8>;
|
|
status = "okay";
|
|
};
|
|
|
|
&sdmmc0 {
|
|
bus-width = <4>;
|
|
cap-sd-highspeed;
|
|
cd-gpios = <&gpio0 RK_PA4 GPIO_ACTIVE_LOW>;
|
|
disable-wp;
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&sdmmc0_bus4 &sdmmc0_clk &sdmmc0_cmd &sdmmc0_det>;
|
|
sd-uhs-sdr50;
|
|
vmmc-supply = <&vcc3v3_sd>;
|
|
vqmmc-supply = <&vccio_sd>;
|
|
status = "okay";
|
|
};
|
|
|
|
&sdmmc1 {
|
|
bus-width = <4>;
|
|
cap-sd-highspeed;
|
|
cap-sdio-irq;
|
|
keep-power-in-suspend;
|
|
mmc-pwrseq = <&sdio_pwrseq>;
|
|
non-removable;
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&sdmmc1_bus4 &sdmmc1_cmd &sdmmc1_clk>;
|
|
vmmc-supply = <&vcc3v3_sys>;
|
|
vqmmc-supply = <&vcca1v8_pmu>;
|
|
status = "okay";
|
|
};
|
|
|
|
&sfc {
|
|
pinctrl-0 = <&fspi_pins>;
|
|
pinctrl-names = "default";
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
status = "okay";
|
|
|
|
flash@0 {
|
|
compatible = "jedec,spi-nor";
|
|
reg = <0>;
|
|
spi-max-frequency = <24000000>;
|
|
spi-rx-bus-width = <4>;
|
|
spi-tx-bus-width = <1>;
|
|
};
|
|
};
|
|
|
|
&tsadc {
|
|
status = "okay";
|
|
};
|
|
|
|
&uart1 {
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&uart1m0_xfer &uart1m0_ctsn &uart1m0_rtsn>;
|
|
status = "okay";
|
|
uart-has-rtscts;
|
|
|
|
bluetooth {
|
|
compatible = "brcm,bcm4345c5";
|
|
clocks = <&rk809 1>;
|
|
clock-names = "lpo";
|
|
device-wakeup-gpios = <&gpio0 RK_PB4 GPIO_ACTIVE_HIGH>;
|
|
host-wakeup-gpios = <&gpio0 RK_PB3 GPIO_ACTIVE_HIGH>;
|
|
shutdown-gpios = <&gpio0 RK_PC1 GPIO_ACTIVE_HIGH>;
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&bt_host_wake_l &bt_wake_l &bt_enable_h>;
|
|
vbat-supply = <&vcc3v3_sys>;
|
|
vddio-supply = <&vcca1v8_pmu>;
|
|
};
|
|
};
|
|
|
|
/*
|
|
* uart2_m0 is exposed on PI40
|
|
* pin 8 - uart2_tx_m0
|
|
* pin 10 - uart2_rx_m0
|
|
*/
|
|
&uart2 {
|
|
status = "okay";
|
|
};
|
|
|
|
&usb2phy0_host {
|
|
phy-supply = <&vcc5v0_usb30_host>;
|
|
status = "okay";
|
|
};
|
|
|
|
&usb2phy0_otg {
|
|
phy-supply = <&vcc5v0_usb_otg>;
|
|
status = "okay";
|
|
};
|
|
|
|
&usb2phy1_otg {
|
|
phy-supply = <&vcc5v0_usb30_host>;
|
|
status = "okay";
|
|
};
|
|
|
|
&usb2phy0 {
|
|
status = "okay";
|
|
};
|
|
|
|
&usb2phy1 {
|
|
status = "okay";
|
|
};
|
|
|
|
&usb_host0_xhci {
|
|
status = "okay";
|
|
};
|
|
|
|
&usb_host1_xhci {
|
|
status = "okay";
|
|
};
|
|
|
|
&usb_host0_ehci {
|
|
status = "okay";
|
|
};
|
|
|
|
&usb_host0_ohci {
|
|
status = "okay";
|
|
};
|
|
|
|
&vop {
|
|
assigned-clocks = <&cru DCLK_VOP0>, <&cru DCLK_VOP1>;
|
|
assigned-clock-parents = <&pmucru PLL_HPLL>, <&cru PLL_VPLL>;
|
|
status = "okay";
|
|
};
|
|
|
|
&vop_mmu {
|
|
status = "okay";
|
|
};
|
|
|
|
&vp0 {
|
|
vp0_out_hdmi: endpoint@ROCKCHIP_VOP2_EP_HDMI0 {
|
|
reg = <ROCKCHIP_VOP2_EP_HDMI0>;
|
|
remote-endpoint = <&hdmi_in_vp0>;
|
|
};
|
|
};
|