linuxdebug/arch/arm64/boot/dts/qcom/sm8250-sony-xperia-edo-pdx2...

280 lines
5.2 KiB
Plaintext

// SPDX-License-Identifier: BSD-3-Clause
/*
* Copyright (c) 2021, Konrad Dybcio <konrad.dybcio@somainline.org>
*/
/dts-v1/;
#include "sm8250-sony-xperia-edo.dtsi"
/ {
model = "Sony Xperia 5 II";
compatible = "sony,pdx206-generic", "qcom,sm8250";
chassis-type = "handset";
};
&framebuffer {
width = <1080>;
height = <2520>;
stride = <(1080 * 4)>;
};
&gpio_keys {
pinctrl-0 = <&focus_n &snapshot_n &vol_down_n &g_assist_n>;
g-assist-key {
label = "Google Assistant Key";
linux,code = <KEY_LEFTMETA>;
gpios = <&pm8150_gpios 6 GPIO_ACTIVE_LOW>;
debounce-interval = <15>;
linux,can-disable;
gpio-key,wakeup;
};
};
&pm8009_gpios {
gpio-line-names = "NC", /* GPIO_1 */
"NC",
"WIDEC_PWR_EN",
"NC";
};
&pm8150_gpios {
gpio-line-names = "VOL_DOWN_N", /* GPIO_1 */
"OPTION_2",
"NC",
"PM_SLP_CLK_IN",
"OPTION_1",
"G_ASSIST_N",
"NC",
"SP_ARI_PWR_ALARM",
"NC",
"NC"; /* GPIO_10 */
g_assist_n: g-assist-n-state {
pins = "gpio6";
function = "normal";
power-source = <1>;
bias-pull-up;
input-enable;
};
};
&pm8150b_gpios {
gpio-line-names = "SNAPSHOT_N", /* GPIO_1 */
"FOCUS_N",
"NC",
"NC",
"RF_LCD_ID_EN",
"NC",
"NC",
"LCD_ID",
"NC",
"NC", /* GPIO_10 */
"NC",
"RF_ID";
};
&pm8150l_gpios {
gpio-line-names = "NC", /* GPIO_1 */
"PM3003A_EN",
"NC",
"NC",
"NC",
"AUX2_THERM",
"BB_HP_EN",
"FP_LDO_EN",
"PMX_RESET_N",
"NC", /* GPIO_10 */
"NC",
"PM3003A_MODE";
};
&tlmm {
gpio-line-names = "AP_CTI_IN", /* GPIO_0 */
"MDM2AP_ERR_FATAL",
"AP_CTI_OUT",
"MDM2AP_STATUS",
"NFC_I2C_SDA",
"NFC_I2C_SCL",
"NFC_EN",
"NFC_CLK_REQ",
"NFC_ESE_PWR_REQ",
"DVDT_WRT_DET_AND",
"SPK_AMP_RESET_N", /* GPIO_10 */
"SPK_AMP_INT_N",
"APPS_I2C_1_SDA",
"APPS_I2C_1_SCL",
"NC",
"TX_GTR_THRES_IN",
"HST_BT_UART_CTS",
"HST_BT_UART_RFR",
"HST_BT_UART_TX",
"HST_BT_UART_RX",
"HST_WLAN_EN", /* GPIO_20 */
"HST_BT_EN",
"RGBC_IR_PWR_EN",
"FP_INT_N",
"NC",
"NC",
"NC",
"NC",
"NFC_ESE_SPI_MISO",
"NFC_ESE_SPI_MOSI",
"NFC_ESE_SPI_SCLK", /* GPIO_30 */
"NFC_ESE_SPI_CS_N",
"WCD_RST_N",
"NC",
"SDM_DEBUG_UART_TX",
"SDM_DEBUG_UART_RX",
"TS_I2C_SDA",
"TS_I2C_SCL",
"TS_INT_N",
"FP_SPI_MISO", /* GPIO_40 */
"FP_SPI_MOSI",
"FP_SPI_SCLK",
"FP_SPI_CS_N",
"APPS_I2C_0_SDA",
"APPS_I2C_0_SCL",
"DISP_ERR_FG",
"UIM2_DETECT_EN",
"NC",
"NC",
"NC", /* GPIO_50 */
"NC",
"MDM_UART_CTS",
"MDM_UART_RFR",
"MDM_UART_TX",
"MDM_UART_RX",
"AP2MDM_STATUS",
"AP2MDM_ERR_FATAL",
"MDM_IPC_HS_UART_TX",
"MDM_IPC_HS_UART_RX",
"NC", /* GPIO_60 */
"NC",
"NC",
"NC",
"NC",
"USB_CC_DIR",
"DISP_VSYNC",
"NC",
"NC",
"CAM_PWR_B_CS",
"NC", /* GPIO_70 */
"FRONTC_PWR_EN",
"SBU_SW_SEL",
"SBU_SW_OE",
"FP_RESET_N",
"FP_RESET_N",
"DISP_RESET_N",
"DEBUG_GPIO0",
"TRAY_DET",
"CAM2_RST_N",
"PCIE0_RST_N",
"PCIE0_CLK_REQ_N", /* GPIO_80 */
"PCIE0_WAKE_N",
"DVDT_ENABLE",
"DVDT_WRT_DET_OR",
"NC",
"PCIE2_RST_N",
"PCIE2_CLK_REQ_N",
"PCIE2_WAKE_N",
"MDM_VFR_IRQ0",
"MDM_VFR_IRQ1",
"SW_SERVICE", /* GPIO_90 */
"CAM_SOF",
"CAM1_RST_N",
"CAM0_RST_N",
"CAM0_MCLK",
"CAM1_MCLK",
"CAM2_MCLK",
"CAM3_MCLK",
"NC",
"NC",
"NC", /* GPIO_100 */
"CCI0_I2C_SDA",
"CCI0_I2C_SCL",
"CCI1_I2C_SDA",
"CCI1_I2C_SCL_",
"CCI2_I2C_SDA",
"CCI2_I2C_SCL",
"CCI3_I2C_SDA",
"CCI3_I2C_SCL",
"CAM3_RST_N",
"NFC_DWL_REQ", /* GPIO_110 */
"NFC_IRQ",
"XVS",
"NC",
"RF_ID_EXTENSION",
"SPK_AMP_I2C_SDA",
"SPK_AMP_I2C_SCL",
"NC",
"NC",
"NC",
"NC",
"ACC_COVER_OPEN",
"ALS_PROX_INT_N",
"ACCEL_INT",
"WLAN_SW_CTRL",
"CAMSENSOR_I2C_SDA",
"CAMSENSOR_I2C_SCL",
"UDON_SWITCH_SEL",
"WDOG_DISABLE",
"BAROMETER_INT",
"NC", /* GPIO_130 */
"NC",
"FORCED_USB_BOOT",
"NC",
"NC",
"NC",
"NC",
"NC",
"RGBC_IR_INT",
"NC",
"NC", /* GPIO_140 */
"NC",
"BT_SLIMBUS_CLK",
"BT_SLIMBUS_DATA",
"HW_ID_0",
"HW_ID_1",
"WCD_SWR_TX_CLK",
"WCD_SWR_TX_DATA0",
"WCD_SWR_TX_DATA1",
"WCD_SWR_RX_CLK",
"WCD_SWR_RX_DATA0", /* GPIO_150 */
"WCD_SWR_RX_DATA1",
"SDM_DMIC_CLK1",
"SDM_DMIC_DATA1",
"SDM_DMIC_CLK2",
"SDM_DMIC_DATA2",
"SPK_AMP_I2S_CLK",
"SPK_AMP_I2S_WS",
"SPK_AMP_I2S_ASP_DIN",
"SPK_AMP_I2S_ASP_DOUT",
"COMPASS_I2C_SDA", /* GPIO_160 */
"COMPASS_I2C_SCL",
"NC",
"NC",
"SSC_SPI_1_MISO",
"SSC_SPI_1_MOSI",
"SSC_SPI_1_CLK",
"SSC_SPI_1_CS_N",
"NC",
"NC",
"SSC_SENSOR_I2C_SDA", /* GPIO_170 */
"SSC_SENSOR_I2C_SCL",
"NC",
"NC",
"NC",
"NC",
"HST_BLE_SNS_UART6_TX",
"HST_BLE_SNS_UART6_RX",
"HST_WLAN_UART_TX",
"HST_WLAN_UART_RX";
};
&vreg_l2f_1p3 {
regulator-min-microvolt = <1200000>;
regulator-max-microvolt = <1200000>;
};