1294 lines
24 KiB
Plaintext
1294 lines
24 KiB
Plaintext
// SPDX-License-Identifier: GPL-2.0
|
|
/*
|
|
* Copyright (c) 2019, Linaro Ltd.
|
|
*/
|
|
|
|
/dts-v1/;
|
|
|
|
#include <dt-bindings/leds/common.h>
|
|
#include <dt-bindings/pinctrl/qcom,pmic-gpio.h>
|
|
#include <dt-bindings/regulator/qcom,rpmh-regulator.h>
|
|
#include <dt-bindings/sound/qcom,q6afe.h>
|
|
#include <dt-bindings/sound/qcom,q6asm.h>
|
|
#include "sdm845.dtsi"
|
|
#include "pm8998.dtsi"
|
|
#include "pmi8998.dtsi"
|
|
|
|
/ {
|
|
model = "Thundercomm Dragonboard 845c";
|
|
compatible = "thundercomm,db845c", "qcom,sdm845";
|
|
qcom,msm-id = <341 0x20001>;
|
|
qcom,board-id = <8 0>;
|
|
|
|
aliases {
|
|
serial0 = &uart9;
|
|
hsuart0 = &uart6;
|
|
};
|
|
|
|
chosen {
|
|
stdout-path = "serial0:115200n8";
|
|
};
|
|
|
|
/* Fixed crystal oscillator dedicated to MCP2517FD */
|
|
clk40M: can-clock {
|
|
compatible = "fixed-clock";
|
|
#clock-cells = <0>;
|
|
clock-frequency = <40000000>;
|
|
};
|
|
|
|
dc12v: dc12v-regulator {
|
|
compatible = "regulator-fixed";
|
|
regulator-name = "DC12V";
|
|
regulator-min-microvolt = <12000000>;
|
|
regulator-max-microvolt = <12000000>;
|
|
regulator-always-on;
|
|
};
|
|
|
|
gpio-keys {
|
|
compatible = "gpio-keys";
|
|
autorepeat;
|
|
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&vol_up_pin_a>;
|
|
|
|
key-vol-up {
|
|
label = "Volume Up";
|
|
linux,code = <KEY_VOLUMEUP>;
|
|
gpios = <&pm8998_gpio 6 GPIO_ACTIVE_LOW>;
|
|
};
|
|
};
|
|
|
|
leds {
|
|
compatible = "gpio-leds";
|
|
|
|
led-0 {
|
|
label = "green:user4";
|
|
function = LED_FUNCTION_INDICATOR;
|
|
color = <LED_COLOR_ID_GREEN>;
|
|
gpios = <&pm8998_gpio 13 GPIO_ACTIVE_HIGH>;
|
|
linux,default-trigger = "panic-indicator";
|
|
default-state = "off";
|
|
};
|
|
|
|
led-1 {
|
|
label = "yellow:wlan";
|
|
function = LED_FUNCTION_WLAN;
|
|
color = <LED_COLOR_ID_YELLOW>;
|
|
gpios = <&pm8998_gpio 9 GPIO_ACTIVE_HIGH>;
|
|
linux,default-trigger = "phy0tx";
|
|
default-state = "off";
|
|
};
|
|
|
|
led-2 {
|
|
label = "blue:bt";
|
|
function = LED_FUNCTION_BLUETOOTH;
|
|
color = <LED_COLOR_ID_BLUE>;
|
|
gpios = <&pm8998_gpio 5 GPIO_ACTIVE_HIGH>;
|
|
linux,default-trigger = "bluetooth-power";
|
|
default-state = "off";
|
|
};
|
|
};
|
|
|
|
hdmi-out {
|
|
compatible = "hdmi-connector";
|
|
type = "a";
|
|
|
|
port {
|
|
hdmi_con: endpoint {
|
|
remote-endpoint = <<9611_out>;
|
|
};
|
|
};
|
|
};
|
|
|
|
lt9611_1v8: lt9611-vdd18-regulator {
|
|
compatible = "regulator-fixed";
|
|
regulator-name = "LT9611_1V8";
|
|
|
|
vin-supply = <&vdc_5v>;
|
|
regulator-min-microvolt = <1800000>;
|
|
regulator-max-microvolt = <1800000>;
|
|
|
|
gpio = <&tlmm 89 GPIO_ACTIVE_HIGH>;
|
|
enable-active-high;
|
|
};
|
|
|
|
lt9611_3v3: lt9611-3v3 {
|
|
compatible = "regulator-fixed";
|
|
regulator-name = "LT9611_3V3";
|
|
|
|
vin-supply = <&vdc_3v3>;
|
|
regulator-min-microvolt = <3300000>;
|
|
regulator-max-microvolt = <3300000>;
|
|
|
|
// TODO: make it possible to drive same GPIO from two clients
|
|
// gpio = <&tlmm 89 GPIO_ACTIVE_HIGH>;
|
|
// enable-active-high;
|
|
};
|
|
|
|
pcie0_1p05v: pcie-0-1p05v-regulator {
|
|
compatible = "regulator-fixed";
|
|
regulator-name = "PCIE0_1.05V";
|
|
|
|
vin-supply = <&vbat>;
|
|
regulator-min-microvolt = <1050000>;
|
|
regulator-max-microvolt = <1050000>;
|
|
|
|
// TODO: make it possible to drive same GPIO from two clients
|
|
// gpio = <&tlmm 90 GPIO_ACTIVE_HIGH>;
|
|
// enable-active-high;
|
|
};
|
|
|
|
cam0_dvdd_1v2: reg_cam0_dvdd_1v2 {
|
|
compatible = "regulator-fixed";
|
|
regulator-name = "CAM0_DVDD_1V2";
|
|
regulator-min-microvolt = <1200000>;
|
|
regulator-max-microvolt = <1200000>;
|
|
enable-active-high;
|
|
gpio = <&pm8998_gpio 12 GPIO_ACTIVE_HIGH>;
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&cam0_dvdd_1v2_en_default>;
|
|
vin-supply = <&vbat>;
|
|
};
|
|
|
|
cam0_avdd_2v8: reg_cam0_avdd_2v8 {
|
|
compatible = "regulator-fixed";
|
|
regulator-name = "CAM0_AVDD_2V8";
|
|
regulator-min-microvolt = <2800000>;
|
|
regulator-max-microvolt = <2800000>;
|
|
enable-active-high;
|
|
gpio = <&pm8998_gpio 10 GPIO_ACTIVE_HIGH>;
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&cam0_avdd_2v8_en_default>;
|
|
vin-supply = <&vbat>;
|
|
};
|
|
|
|
/* This regulator is enabled when the VREG_LVS1A_1P8 trace is enabled */
|
|
cam3_avdd_2v8: reg_cam3_avdd_2v8 {
|
|
compatible = "regulator-fixed";
|
|
regulator-name = "CAM3_AVDD_2V8";
|
|
regulator-min-microvolt = <2800000>;
|
|
regulator-max-microvolt = <2800000>;
|
|
regulator-always-on;
|
|
vin-supply = <&vbat>;
|
|
};
|
|
|
|
pcie0_3p3v_dual: vldo-3v3-regulator {
|
|
compatible = "regulator-fixed";
|
|
regulator-name = "VLDO_3V3";
|
|
|
|
vin-supply = <&vbat>;
|
|
regulator-min-microvolt = <3300000>;
|
|
regulator-max-microvolt = <3300000>;
|
|
|
|
gpio = <&tlmm 90 GPIO_ACTIVE_HIGH>;
|
|
enable-active-high;
|
|
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&pcie0_pwren_state>;
|
|
};
|
|
|
|
v5p0_hdmiout: v5p0-hdmiout-regulator {
|
|
compatible = "regulator-fixed";
|
|
regulator-name = "V5P0_HDMIOUT";
|
|
|
|
vin-supply = <&vdc_5v>;
|
|
regulator-min-microvolt = <500000>;
|
|
regulator-max-microvolt = <500000>;
|
|
|
|
// TODO: make it possible to drive same GPIO from two clients
|
|
// gpio = <&tlmm 89 GPIO_ACTIVE_HIGH>;
|
|
// enable-active-high;
|
|
};
|
|
|
|
vbat: vbat-regulator {
|
|
compatible = "regulator-fixed";
|
|
regulator-name = "VBAT";
|
|
|
|
vin-supply = <&dc12v>;
|
|
regulator-min-microvolt = <4200000>;
|
|
regulator-max-microvolt = <4200000>;
|
|
regulator-always-on;
|
|
};
|
|
|
|
vbat_som: vbat-som-regulator {
|
|
compatible = "regulator-fixed";
|
|
regulator-name = "VBAT_SOM";
|
|
|
|
vin-supply = <&dc12v>;
|
|
regulator-min-microvolt = <4200000>;
|
|
regulator-max-microvolt = <4200000>;
|
|
regulator-always-on;
|
|
};
|
|
|
|
vdc_3v3: vdc-3v3-regulator {
|
|
compatible = "regulator-fixed";
|
|
regulator-name = "VDC_3V3";
|
|
vin-supply = <&dc12v>;
|
|
regulator-min-microvolt = <3300000>;
|
|
regulator-max-microvolt = <3300000>;
|
|
regulator-always-on;
|
|
};
|
|
|
|
vdc_5v: vdc-5v-regulator {
|
|
compatible = "regulator-fixed";
|
|
regulator-name = "VDC_5V";
|
|
|
|
vin-supply = <&dc12v>;
|
|
regulator-min-microvolt = <500000>;
|
|
regulator-max-microvolt = <500000>;
|
|
regulator-always-on;
|
|
};
|
|
|
|
vreg_s4a_1p8: vreg-s4a-1p8 {
|
|
compatible = "regulator-fixed";
|
|
regulator-name = "vreg_s4a_1p8";
|
|
|
|
regulator-min-microvolt = <1800000>;
|
|
regulator-max-microvolt = <1800000>;
|
|
regulator-always-on;
|
|
};
|
|
|
|
vph_pwr: vph-pwr-regulator {
|
|
compatible = "regulator-fixed";
|
|
regulator-name = "vph_pwr";
|
|
|
|
vin-supply = <&vbat_som>;
|
|
};
|
|
};
|
|
|
|
&adsp_pas {
|
|
status = "okay";
|
|
|
|
firmware-name = "qcom/sdm845/adsp.mbn";
|
|
};
|
|
|
|
&apps_rsc {
|
|
pm8998-rpmh-regulators {
|
|
compatible = "qcom,pm8998-rpmh-regulators";
|
|
qcom,pmic-id = "a";
|
|
vdd-s1-supply = <&vph_pwr>;
|
|
vdd-s2-supply = <&vph_pwr>;
|
|
vdd-s3-supply = <&vph_pwr>;
|
|
vdd-s4-supply = <&vph_pwr>;
|
|
vdd-s5-supply = <&vph_pwr>;
|
|
vdd-s6-supply = <&vph_pwr>;
|
|
vdd-s7-supply = <&vph_pwr>;
|
|
vdd-s8-supply = <&vph_pwr>;
|
|
vdd-s9-supply = <&vph_pwr>;
|
|
vdd-s10-supply = <&vph_pwr>;
|
|
vdd-s11-supply = <&vph_pwr>;
|
|
vdd-s12-supply = <&vph_pwr>;
|
|
vdd-s13-supply = <&vph_pwr>;
|
|
vdd-l1-l27-supply = <&vreg_s7a_1p025>;
|
|
vdd-l2-l8-l17-supply = <&vreg_s3a_1p35>;
|
|
vdd-l3-l11-supply = <&vreg_s7a_1p025>;
|
|
vdd-l4-l5-supply = <&vreg_s7a_1p025>;
|
|
vdd-l6-supply = <&vph_pwr>;
|
|
vdd-l7-l12-l14-l15-supply = <&vreg_s5a_2p04>;
|
|
vdd-l9-supply = <&vreg_bob>;
|
|
vdd-l10-l23-l25-supply = <&vreg_bob>;
|
|
vdd-l13-l19-l21-supply = <&vreg_bob>;
|
|
vdd-l16-l28-supply = <&vreg_bob>;
|
|
vdd-l18-l22-supply = <&vreg_bob>;
|
|
vdd-l20-l24-supply = <&vreg_bob>;
|
|
vdd-l26-supply = <&vreg_s3a_1p35>;
|
|
vin-lvs-1-2-supply = <&vreg_s4a_1p8>;
|
|
|
|
vreg_s3a_1p35: smps3 {
|
|
regulator-min-microvolt = <1352000>;
|
|
regulator-max-microvolt = <1352000>;
|
|
};
|
|
|
|
vreg_s5a_2p04: smps5 {
|
|
regulator-min-microvolt = <1904000>;
|
|
regulator-max-microvolt = <2040000>;
|
|
};
|
|
|
|
vreg_s7a_1p025: smps7 {
|
|
regulator-min-microvolt = <900000>;
|
|
regulator-max-microvolt = <1028000>;
|
|
};
|
|
|
|
vreg_l1a_0p875: ldo1 {
|
|
regulator-min-microvolt = <880000>;
|
|
regulator-max-microvolt = <880000>;
|
|
regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
|
|
};
|
|
|
|
vreg_l5a_0p8: ldo5 {
|
|
regulator-min-microvolt = <800000>;
|
|
regulator-max-microvolt = <800000>;
|
|
regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
|
|
};
|
|
|
|
vreg_l12a_1p8: ldo12 {
|
|
regulator-min-microvolt = <1800000>;
|
|
regulator-max-microvolt = <1800000>;
|
|
regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
|
|
};
|
|
|
|
vreg_l7a_1p8: ldo7 {
|
|
regulator-min-microvolt = <1800000>;
|
|
regulator-max-microvolt = <1800000>;
|
|
regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
|
|
};
|
|
|
|
vreg_l13a_2p95: ldo13 {
|
|
regulator-min-microvolt = <1800000>;
|
|
regulator-max-microvolt = <2960000>;
|
|
regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
|
|
};
|
|
|
|
vreg_l17a_1p3: ldo17 {
|
|
regulator-min-microvolt = <1304000>;
|
|
regulator-max-microvolt = <1304000>;
|
|
regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
|
|
};
|
|
|
|
vreg_l20a_2p95: ldo20 {
|
|
regulator-min-microvolt = <2960000>;
|
|
regulator-max-microvolt = <2968000>;
|
|
regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
|
|
};
|
|
|
|
vreg_l21a_2p95: ldo21 {
|
|
regulator-min-microvolt = <2960000>;
|
|
regulator-max-microvolt = <2968000>;
|
|
regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
|
|
};
|
|
|
|
vreg_l24a_3p075: ldo24 {
|
|
regulator-min-microvolt = <3088000>;
|
|
regulator-max-microvolt = <3088000>;
|
|
regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
|
|
};
|
|
|
|
vreg_l25a_3p3: ldo25 {
|
|
regulator-min-microvolt = <3300000>;
|
|
regulator-max-microvolt = <3312000>;
|
|
regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
|
|
};
|
|
|
|
vreg_l26a_1p2: ldo26 {
|
|
regulator-min-microvolt = <1200000>;
|
|
regulator-max-microvolt = <1200000>;
|
|
regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
|
|
};
|
|
|
|
vreg_lvs1a_1p8: lvs1 {
|
|
regulator-min-microvolt = <1800000>;
|
|
regulator-max-microvolt = <1800000>;
|
|
regulator-always-on;
|
|
};
|
|
|
|
vreg_lvs2a_1p8: lvs2 {
|
|
regulator-min-microvolt = <1800000>;
|
|
regulator-max-microvolt = <1800000>;
|
|
regulator-always-on;
|
|
};
|
|
};
|
|
|
|
pmi8998-rpmh-regulators {
|
|
compatible = "qcom,pmi8998-rpmh-regulators";
|
|
qcom,pmic-id = "b";
|
|
|
|
vdd-bob-supply = <&vph_pwr>;
|
|
|
|
vreg_bob: bob {
|
|
regulator-min-microvolt = <3312000>;
|
|
regulator-max-microvolt = <3600000>;
|
|
regulator-initial-mode = <RPMH_REGULATOR_MODE_AUTO>;
|
|
regulator-allow-bypass;
|
|
};
|
|
};
|
|
};
|
|
|
|
&cdsp_pas {
|
|
status = "okay";
|
|
firmware-name = "qcom/sdm845/cdsp.mbn";
|
|
};
|
|
|
|
&dsi0 {
|
|
status = "okay";
|
|
vdda-supply = <&vreg_l26a_1p2>;
|
|
|
|
ports {
|
|
port@1 {
|
|
endpoint {
|
|
remote-endpoint = <<9611_a>;
|
|
data-lanes = <0 1 2 3>;
|
|
};
|
|
};
|
|
};
|
|
};
|
|
|
|
&dsi0_phy {
|
|
status = "okay";
|
|
vdds-supply = <&vreg_l1a_0p875>;
|
|
};
|
|
|
|
&gcc {
|
|
protected-clocks = <GCC_QSPI_CORE_CLK>,
|
|
<GCC_QSPI_CORE_CLK_SRC>,
|
|
<GCC_QSPI_CNOC_PERIPH_AHB_CLK>,
|
|
<GCC_LPASS_Q6_AXI_CLK>,
|
|
<GCC_LPASS_SWAY_CLK>;
|
|
};
|
|
|
|
&gmu {
|
|
status = "okay";
|
|
};
|
|
|
|
&gpi_dma0 {
|
|
status = "okay";
|
|
};
|
|
|
|
&gpi_dma1 {
|
|
status = "okay";
|
|
};
|
|
|
|
&gpu {
|
|
status = "okay";
|
|
zap-shader {
|
|
memory-region = <&gpu_mem>;
|
|
firmware-name = "qcom/sdm845/a630_zap.mbn";
|
|
};
|
|
};
|
|
|
|
&i2c10 {
|
|
status = "okay";
|
|
clock-frequency = <400000>;
|
|
|
|
lt9611_codec: hdmi-bridge@3b {
|
|
compatible = "lontium,lt9611";
|
|
reg = <0x3b>;
|
|
#sound-dai-cells = <1>;
|
|
|
|
interrupts-extended = <&tlmm 84 IRQ_TYPE_EDGE_FALLING>;
|
|
|
|
reset-gpios = <&tlmm 128 GPIO_ACTIVE_HIGH>;
|
|
|
|
vdd-supply = <<9611_1v8>;
|
|
vcc-supply = <<9611_3v3>;
|
|
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <<9611_irq_pin>, <&dsi_sw_sel>;
|
|
|
|
ports {
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
|
|
port@0 {
|
|
reg = <0>;
|
|
|
|
lt9611_a: endpoint {
|
|
remote-endpoint = <&dsi0_out>;
|
|
};
|
|
};
|
|
|
|
port@2 {
|
|
reg = <2>;
|
|
|
|
lt9611_out: endpoint {
|
|
remote-endpoint = <&hdmi_con>;
|
|
};
|
|
};
|
|
};
|
|
};
|
|
};
|
|
|
|
&i2c11 {
|
|
/* On Low speed expansion */
|
|
clock-frequency = <100000>;
|
|
label = "LS-I2C1";
|
|
status = "okay";
|
|
};
|
|
|
|
&i2c14 {
|
|
/* On Low speed expansion */
|
|
clock-frequency = <100000>;
|
|
label = "LS-I2C0";
|
|
status = "okay";
|
|
};
|
|
|
|
&mdss {
|
|
status = "okay";
|
|
};
|
|
|
|
&mss_pil {
|
|
status = "okay";
|
|
firmware-name = "qcom/sdm845/mba.mbn", "qcom/sdm845/modem.mbn";
|
|
};
|
|
|
|
&pcie0 {
|
|
status = "okay";
|
|
perst-gpios = <&tlmm 35 GPIO_ACTIVE_LOW>;
|
|
enable-gpio = <&tlmm 134 GPIO_ACTIVE_HIGH>;
|
|
|
|
vddpe-3v3-supply = <&pcie0_3p3v_dual>;
|
|
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&pcie0_default_state>;
|
|
};
|
|
|
|
&pcie0_phy {
|
|
status = "okay";
|
|
|
|
vdda-phy-supply = <&vreg_l1a_0p875>;
|
|
vdda-pll-supply = <&vreg_l26a_1p2>;
|
|
};
|
|
|
|
&pcie1 {
|
|
status = "okay";
|
|
perst-gpios = <&tlmm 102 GPIO_ACTIVE_LOW>;
|
|
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&pcie1_default_state>;
|
|
};
|
|
|
|
&pcie1_phy {
|
|
status = "okay";
|
|
|
|
vdda-phy-supply = <&vreg_l1a_0p875>;
|
|
vdda-pll-supply = <&vreg_l26a_1p2>;
|
|
};
|
|
|
|
&pm8998_gpio {
|
|
gpio-line-names =
|
|
"NC",
|
|
"NC",
|
|
"WLAN_SW_CTRL",
|
|
"NC",
|
|
"PM_GPIO5_BLUE_BT_LED",
|
|
"VOL_UP_N",
|
|
"NC",
|
|
"ADC_IN1",
|
|
"PM_GPIO9_YEL_WIFI_LED",
|
|
"CAM0_AVDD_EN",
|
|
"NC",
|
|
"CAM0_DVDD_EN",
|
|
"PM_GPIO13_GREEN_U4_LED",
|
|
"DIV_CLK2",
|
|
"NC",
|
|
"NC",
|
|
"NC",
|
|
"SMB_STAT",
|
|
"NC",
|
|
"NC",
|
|
"ADC_IN2",
|
|
"OPTION1",
|
|
"WCSS_PWR_REQ",
|
|
"PM845_GPIO24",
|
|
"OPTION2",
|
|
"PM845_SLB";
|
|
|
|
cam0_dvdd_1v2_en_default: cam0-dvdd-1v2-en-state {
|
|
pins = "gpio12";
|
|
function = "normal";
|
|
|
|
bias-pull-up;
|
|
drive-push-pull;
|
|
qcom,drive-strength = <PMIC_GPIO_STRENGTH_HIGH>;
|
|
};
|
|
|
|
cam0_avdd_2v8_en_default: cam0-avdd-2v8-en-state {
|
|
pins = "gpio10";
|
|
function = "normal";
|
|
|
|
bias-pull-up;
|
|
drive-push-pull;
|
|
qcom,drive-strength = <PMIC_GPIO_STRENGTH_HIGH>;
|
|
};
|
|
|
|
vol_up_pin_a: vol-up-active-state {
|
|
pins = "gpio6";
|
|
function = "normal";
|
|
input-enable;
|
|
bias-pull-up;
|
|
qcom,drive-strength = <PMIC_GPIO_STRENGTH_NO>;
|
|
};
|
|
};
|
|
|
|
&pm8998_pon {
|
|
resin {
|
|
compatible = "qcom,pm8941-resin";
|
|
interrupts = <0x0 0x8 1 IRQ_TYPE_EDGE_BOTH>;
|
|
debounce = <15625>;
|
|
bias-pull-up;
|
|
linux,code = <KEY_VOLUMEDOWN>;
|
|
};
|
|
};
|
|
|
|
&pmi8998_lpg {
|
|
status = "okay";
|
|
|
|
qcom,power-source = <1>;
|
|
|
|
led@3 {
|
|
reg = <3>;
|
|
color = <LED_COLOR_ID_GREEN>;
|
|
function = LED_FUNCTION_HEARTBEAT;
|
|
function-enumerator = <3>;
|
|
|
|
linux,default-trigger = "heartbeat";
|
|
default-state = "on";
|
|
};
|
|
|
|
led@4 {
|
|
reg = <4>;
|
|
color = <LED_COLOR_ID_GREEN>;
|
|
function = LED_FUNCTION_INDICATOR;
|
|
function-enumerator = <2>;
|
|
};
|
|
|
|
led@5 {
|
|
reg = <5>;
|
|
color = <LED_COLOR_ID_GREEN>;
|
|
function = LED_FUNCTION_INDICATOR;
|
|
function-enumerator = <1>;
|
|
};
|
|
};
|
|
|
|
/* QUAT I2S Uses 4 I2S SD Lines for audio on LT9611 HDMI Bridge */
|
|
&q6afedai {
|
|
qi2s@22 {
|
|
reg = <QUATERNARY_MI2S_RX>;
|
|
qcom,sd-lines = <0 1 2 3>;
|
|
};
|
|
};
|
|
|
|
&q6asmdai {
|
|
dai@0 {
|
|
reg = <0>;
|
|
};
|
|
|
|
dai@1 {
|
|
reg = <1>;
|
|
};
|
|
|
|
dai@2 {
|
|
reg = <2>;
|
|
};
|
|
|
|
dai@3 {
|
|
reg = <3>;
|
|
direction = <2>;
|
|
is-compress-dai;
|
|
};
|
|
};
|
|
|
|
&qupv3_id_0 {
|
|
status = "okay";
|
|
};
|
|
|
|
&qupv3_id_1 {
|
|
status = "okay";
|
|
};
|
|
|
|
&sdhc_2 {
|
|
status = "okay";
|
|
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&sdc2_default_state &sdc2_card_det_n>;
|
|
|
|
vmmc-supply = <&vreg_l21a_2p95>;
|
|
vqmmc-supply = <&vreg_l13a_2p95>;
|
|
|
|
bus-width = <4>;
|
|
cd-gpios = <&tlmm 126 GPIO_ACTIVE_LOW>;
|
|
};
|
|
|
|
&sound {
|
|
compatible = "qcom,db845c-sndcard";
|
|
pinctrl-0 = <&quat_mi2s_active
|
|
&quat_mi2s_sd0_active
|
|
&quat_mi2s_sd1_active
|
|
&quat_mi2s_sd2_active
|
|
&quat_mi2s_sd3_active>;
|
|
pinctrl-names = "default";
|
|
model = "DB845c";
|
|
audio-routing =
|
|
"RX_BIAS", "MCLK",
|
|
"AMIC1", "MIC BIAS1",
|
|
"AMIC2", "MIC BIAS2",
|
|
"DMIC0", "MIC BIAS1",
|
|
"DMIC1", "MIC BIAS1",
|
|
"DMIC2", "MIC BIAS3",
|
|
"DMIC3", "MIC BIAS3",
|
|
"SpkrLeft IN", "SPK1 OUT",
|
|
"SpkrRight IN", "SPK2 OUT",
|
|
"MM_DL1", "MultiMedia1 Playback",
|
|
"MM_DL2", "MultiMedia2 Playback",
|
|
"MM_DL4", "MultiMedia4 Playback",
|
|
"MultiMedia3 Capture", "MM_UL3";
|
|
|
|
mm1-dai-link {
|
|
link-name = "MultiMedia1";
|
|
cpu {
|
|
sound-dai = <&q6asmdai MSM_FRONTEND_DAI_MULTIMEDIA1>;
|
|
};
|
|
};
|
|
|
|
mm2-dai-link {
|
|
link-name = "MultiMedia2";
|
|
cpu {
|
|
sound-dai = <&q6asmdai MSM_FRONTEND_DAI_MULTIMEDIA2>;
|
|
};
|
|
};
|
|
|
|
mm3-dai-link {
|
|
link-name = "MultiMedia3";
|
|
cpu {
|
|
sound-dai = <&q6asmdai MSM_FRONTEND_DAI_MULTIMEDIA3>;
|
|
};
|
|
};
|
|
|
|
mm4-dai-link {
|
|
link-name = "MultiMedia4";
|
|
cpu {
|
|
sound-dai = <&q6asmdai MSM_FRONTEND_DAI_MULTIMEDIA4>;
|
|
};
|
|
};
|
|
|
|
hdmi-dai-link {
|
|
link-name = "HDMI Playback";
|
|
cpu {
|
|
sound-dai = <&q6afedai QUATERNARY_MI2S_RX>;
|
|
};
|
|
|
|
platform {
|
|
sound-dai = <&q6routing>;
|
|
};
|
|
|
|
codec {
|
|
sound-dai = <<9611_codec 0>;
|
|
};
|
|
};
|
|
|
|
slim-dai-link {
|
|
link-name = "SLIM Playback";
|
|
cpu {
|
|
sound-dai = <&q6afedai SLIMBUS_0_RX>;
|
|
};
|
|
|
|
platform {
|
|
sound-dai = <&q6routing>;
|
|
};
|
|
|
|
codec {
|
|
sound-dai = <&left_spkr>, <&right_spkr>, <&swm 0>, <&wcd9340 0>;
|
|
};
|
|
};
|
|
|
|
slimcap-dai-link {
|
|
link-name = "SLIM Capture";
|
|
cpu {
|
|
sound-dai = <&q6afedai SLIMBUS_0_TX>;
|
|
};
|
|
|
|
platform {
|
|
sound-dai = <&q6routing>;
|
|
};
|
|
|
|
codec {
|
|
sound-dai = <&wcd9340 1>;
|
|
};
|
|
};
|
|
};
|
|
|
|
&spi0 {
|
|
status = "okay";
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&qup_spi0_default>;
|
|
cs-gpios = <&tlmm 3 GPIO_ACTIVE_LOW>;
|
|
|
|
can@0 {
|
|
compatible = "microchip,mcp2517fd";
|
|
reg = <0>;
|
|
clocks = <&clk40M>;
|
|
interrupts-extended = <&tlmm 104 IRQ_TYPE_LEVEL_LOW>;
|
|
spi-max-frequency = <10000000>;
|
|
vdd-supply = <&vdc_5v>;
|
|
xceiver-supply = <&vdc_5v>;
|
|
};
|
|
};
|
|
|
|
&spi2 {
|
|
/* On Low speed expansion */
|
|
label = "LS-SPI0";
|
|
status = "okay";
|
|
};
|
|
|
|
&tlmm {
|
|
cam0_default: cam0_default {
|
|
rst {
|
|
pins = "gpio9";
|
|
function = "gpio";
|
|
|
|
drive-strength = <16>;
|
|
bias-disable;
|
|
};
|
|
|
|
mclk0 {
|
|
pins = "gpio13";
|
|
function = "cam_mclk";
|
|
|
|
drive-strength = <16>;
|
|
bias-disable;
|
|
};
|
|
};
|
|
|
|
cam3_default: cam3_default {
|
|
rst {
|
|
function = "gpio";
|
|
pins = "gpio21";
|
|
|
|
drive-strength = <16>;
|
|
bias-disable;
|
|
};
|
|
|
|
mclk3 {
|
|
function = "cam_mclk";
|
|
pins = "gpio16";
|
|
|
|
drive-strength = <16>;
|
|
bias-disable;
|
|
};
|
|
};
|
|
|
|
dsi_sw_sel: dsi-sw-sel {
|
|
pins = "gpio120";
|
|
function = "gpio";
|
|
|
|
drive-strength = <2>;
|
|
bias-disable;
|
|
output-high;
|
|
};
|
|
|
|
lt9611_irq_pin: lt9611-irq {
|
|
pins = "gpio84";
|
|
function = "gpio";
|
|
bias-disable;
|
|
};
|
|
|
|
pcie0_default_state: pcie0-default {
|
|
clkreq {
|
|
pins = "gpio36";
|
|
function = "pci_e0";
|
|
bias-pull-up;
|
|
};
|
|
|
|
reset-n {
|
|
pins = "gpio35";
|
|
function = "gpio";
|
|
|
|
drive-strength = <2>;
|
|
output-low;
|
|
bias-pull-down;
|
|
};
|
|
|
|
wake-n {
|
|
pins = "gpio37";
|
|
function = "gpio";
|
|
|
|
drive-strength = <2>;
|
|
bias-pull-up;
|
|
};
|
|
};
|
|
|
|
pcie0_pwren_state: pcie0-pwren {
|
|
pins = "gpio90";
|
|
function = "gpio";
|
|
|
|
drive-strength = <2>;
|
|
bias-disable;
|
|
};
|
|
|
|
pcie1_default_state: pcie1-default {
|
|
perst-n {
|
|
pins = "gpio102";
|
|
function = "gpio";
|
|
|
|
drive-strength = <16>;
|
|
bias-disable;
|
|
};
|
|
|
|
clkreq {
|
|
pins = "gpio103";
|
|
function = "pci_e1";
|
|
bias-pull-up;
|
|
};
|
|
|
|
wake-n {
|
|
pins = "gpio11";
|
|
function = "gpio";
|
|
|
|
drive-strength = <2>;
|
|
bias-pull-up;
|
|
};
|
|
|
|
reset-n {
|
|
pins = "gpio75";
|
|
function = "gpio";
|
|
|
|
drive-strength = <16>;
|
|
bias-pull-up;
|
|
output-high;
|
|
};
|
|
};
|
|
|
|
sdc2_default_state: sdc2-default {
|
|
clk {
|
|
pins = "sdc2_clk";
|
|
bias-disable;
|
|
|
|
/*
|
|
* It seems that mmc_test reports errors if drive
|
|
* strength is not 16 on clk, cmd, and data pins.
|
|
*/
|
|
drive-strength = <16>;
|
|
};
|
|
|
|
cmd {
|
|
pins = "sdc2_cmd";
|
|
bias-pull-up;
|
|
drive-strength = <10>;
|
|
};
|
|
|
|
data {
|
|
pins = "sdc2_data";
|
|
bias-pull-up;
|
|
drive-strength = <10>;
|
|
};
|
|
};
|
|
|
|
sdc2_card_det_n: sd-card-det-n {
|
|
pins = "gpio126";
|
|
function = "gpio";
|
|
bias-pull-up;
|
|
};
|
|
|
|
wcd_intr_default: wcd_intr_default {
|
|
pins = "gpio54";
|
|
function = "gpio";
|
|
|
|
input-enable;
|
|
bias-pull-down;
|
|
drive-strength = <2>;
|
|
};
|
|
};
|
|
|
|
&uart3 {
|
|
label = "LS-UART0";
|
|
status = "disabled";
|
|
};
|
|
|
|
&uart6 {
|
|
status = "okay";
|
|
|
|
bluetooth {
|
|
compatible = "qcom,wcn3990-bt";
|
|
|
|
vddio-supply = <&vreg_s4a_1p8>;
|
|
vddxo-supply = <&vreg_l7a_1p8>;
|
|
vddrf-supply = <&vreg_l17a_1p3>;
|
|
vddch0-supply = <&vreg_l25a_3p3>;
|
|
max-speed = <3200000>;
|
|
};
|
|
};
|
|
|
|
&uart9 {
|
|
label = "LS-UART1";
|
|
status = "okay";
|
|
};
|
|
|
|
&usb_1 {
|
|
status = "okay";
|
|
};
|
|
|
|
&usb_1_dwc3 {
|
|
dr_mode = "peripheral";
|
|
};
|
|
|
|
&usb_1_hsphy {
|
|
status = "okay";
|
|
|
|
vdd-supply = <&vreg_l1a_0p875>;
|
|
vdda-pll-supply = <&vreg_l12a_1p8>;
|
|
vdda-phy-dpdm-supply = <&vreg_l24a_3p075>;
|
|
|
|
qcom,imp-res-offset-value = <8>;
|
|
qcom,hstx-trim-value = <QUSB2_V2_HSTX_TRIM_21_6_MA>;
|
|
qcom,preemphasis-level = <QUSB2_V2_PREEMPHASIS_5_PERCENT>;
|
|
qcom,preemphasis-width = <QUSB2_V2_PREEMPHASIS_WIDTH_HALF_BIT>;
|
|
};
|
|
|
|
&usb_1_qmpphy {
|
|
status = "okay";
|
|
|
|
vdda-phy-supply = <&vreg_l26a_1p2>;
|
|
vdda-pll-supply = <&vreg_l1a_0p875>;
|
|
};
|
|
|
|
&usb_2 {
|
|
status = "okay";
|
|
};
|
|
|
|
&usb_2_dwc3 {
|
|
dr_mode = "host";
|
|
};
|
|
|
|
&usb_2_hsphy {
|
|
status = "okay";
|
|
|
|
vdd-supply = <&vreg_l1a_0p875>;
|
|
vdda-pll-supply = <&vreg_l12a_1p8>;
|
|
vdda-phy-dpdm-supply = <&vreg_l24a_3p075>;
|
|
|
|
qcom,imp-res-offset-value = <8>;
|
|
qcom,hstx-trim-value = <QUSB2_V2_HSTX_TRIM_22_8_MA>;
|
|
};
|
|
|
|
&usb_2_qmpphy {
|
|
status = "okay";
|
|
|
|
vdda-phy-supply = <&vreg_l26a_1p2>;
|
|
vdda-pll-supply = <&vreg_l1a_0p875>;
|
|
};
|
|
|
|
&ufs_mem_hc {
|
|
status = "okay";
|
|
|
|
reset-gpios = <&tlmm 150 GPIO_ACTIVE_LOW>;
|
|
|
|
vcc-supply = <&vreg_l20a_2p95>;
|
|
vcc-max-microamp = <800000>;
|
|
};
|
|
|
|
&ufs_mem_phy {
|
|
status = "okay";
|
|
|
|
vdda-phy-supply = <&vreg_l1a_0p875>;
|
|
vdda-pll-supply = <&vreg_l26a_1p2>;
|
|
};
|
|
|
|
&venus {
|
|
status = "okay";
|
|
};
|
|
|
|
&wcd9340{
|
|
pinctrl-0 = <&wcd_intr_default>;
|
|
pinctrl-names = "default";
|
|
clock-names = "extclk";
|
|
clocks = <&rpmhcc RPMH_LN_BB_CLK2>;
|
|
reset-gpios = <&tlmm 64 GPIO_ACTIVE_HIGH>;
|
|
vdd-buck-supply = <&vreg_s4a_1p8>;
|
|
vdd-buck-sido-supply = <&vreg_s4a_1p8>;
|
|
vdd-tx-supply = <&vreg_s4a_1p8>;
|
|
vdd-rx-supply = <&vreg_s4a_1p8>;
|
|
vdd-io-supply = <&vreg_s4a_1p8>;
|
|
|
|
swm: swm@c85 {
|
|
left_spkr: wsa8810-left{
|
|
compatible = "sdw10217201000";
|
|
reg = <0 1>;
|
|
powerdown-gpios = <&wcdgpio 1 GPIO_ACTIVE_HIGH>;
|
|
#thermal-sensor-cells = <0>;
|
|
sound-name-prefix = "SpkrLeft";
|
|
#sound-dai-cells = <0>;
|
|
};
|
|
|
|
right_spkr: wsa8810-right{
|
|
compatible = "sdw10217201000";
|
|
powerdown-gpios = <&wcdgpio 1 GPIO_ACTIVE_HIGH>;
|
|
reg = <0 2>;
|
|
#thermal-sensor-cells = <0>;
|
|
sound-name-prefix = "SpkrRight";
|
|
#sound-dai-cells = <0>;
|
|
};
|
|
};
|
|
};
|
|
|
|
&wifi {
|
|
status = "okay";
|
|
|
|
vdd-0.8-cx-mx-supply = <&vreg_l5a_0p8>;
|
|
vdd-1.8-xo-supply = <&vreg_l7a_1p8>;
|
|
vdd-1.3-rfa-supply = <&vreg_l17a_1p3>;
|
|
vdd-3.3-ch0-supply = <&vreg_l25a_3p3>;
|
|
|
|
qcom,snoc-host-cap-8bit-quirk;
|
|
qcom,ath10k-calibration-variant = "Thundercomm_DB845C";
|
|
};
|
|
|
|
/* PINCTRL - additions to nodes defined in sdm845.dtsi */
|
|
&qup_spi2_default {
|
|
pinconf {
|
|
pins = "gpio27", "gpio28", "gpio29", "gpio30";
|
|
drive-strength = <16>;
|
|
};
|
|
};
|
|
|
|
&qup_uart3_default{
|
|
pinmux {
|
|
pins = "gpio41", "gpio42", "gpio43", "gpio44";
|
|
function = "qup3";
|
|
};
|
|
};
|
|
|
|
&qup_i2c10_default {
|
|
pinconf {
|
|
pins = "gpio55", "gpio56";
|
|
drive-strength = <2>;
|
|
bias-disable;
|
|
};
|
|
};
|
|
|
|
&qup_uart6_default {
|
|
pinmux {
|
|
pins = "gpio45", "gpio46", "gpio47", "gpio48";
|
|
function = "qup6";
|
|
};
|
|
|
|
cts {
|
|
pins = "gpio45";
|
|
bias-disable;
|
|
};
|
|
|
|
rts-tx {
|
|
pins = "gpio46", "gpio47";
|
|
drive-strength = <2>;
|
|
bias-disable;
|
|
};
|
|
|
|
rx {
|
|
pins = "gpio48";
|
|
bias-pull-up;
|
|
};
|
|
};
|
|
|
|
&qup_uart9_default {
|
|
pinconf-tx {
|
|
pins = "gpio4";
|
|
drive-strength = <2>;
|
|
bias-disable;
|
|
};
|
|
|
|
pinconf-rx {
|
|
pins = "gpio5";
|
|
drive-strength = <2>;
|
|
bias-pull-up;
|
|
};
|
|
};
|
|
|
|
&pm8998_gpio {
|
|
|
|
};
|
|
|
|
&cci {
|
|
status = "okay";
|
|
};
|
|
|
|
&camss {
|
|
vdda-phy-supply = <&vreg_l1a_0p875>;
|
|
vdda-pll-supply = <&vreg_l26a_1p2>;
|
|
|
|
status = "ok";
|
|
|
|
ports {
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
port@0 {
|
|
reg = <0>;
|
|
csiphy0_ep: endpoint {
|
|
data-lanes = <0 1 2 3>;
|
|
remote-endpoint = <&ov8856_ep>;
|
|
};
|
|
};
|
|
};
|
|
};
|
|
|
|
&cci_i2c0 {
|
|
camera@10 {
|
|
compatible = "ovti,ov8856";
|
|
reg = <0x10>;
|
|
|
|
// CAM0_RST_N
|
|
reset-gpios = <&tlmm 9 GPIO_ACTIVE_LOW>;
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&cam0_default>;
|
|
|
|
clocks = <&clock_camcc CAM_CC_MCLK0_CLK>;
|
|
clock-names = "xvclk";
|
|
clock-frequency = <19200000>;
|
|
|
|
/* The &vreg_s4a_1p8 trace is powered on as a,
|
|
* so it is represented by a fixed regulator.
|
|
*
|
|
* The 2.8V vdda-supply and 1.2V vddd-supply regulators
|
|
* both have to be enabled through the power management
|
|
* gpios.
|
|
*/
|
|
dovdd-supply = <&vreg_lvs1a_1p8>;
|
|
avdd-supply = <&cam0_avdd_2v8>;
|
|
dvdd-supply = <&cam0_dvdd_1v2>;
|
|
|
|
status = "ok";
|
|
|
|
port {
|
|
ov8856_ep: endpoint {
|
|
link-frequencies = /bits/ 64
|
|
<360000000 180000000>;
|
|
data-lanes = <1 2 3 4>;
|
|
remote-endpoint = <&csiphy0_ep>;
|
|
};
|
|
};
|
|
};
|
|
};
|
|
|
|
&cci_i2c1 {
|
|
camera@60 {
|
|
compatible = "ovti,ov7251";
|
|
|
|
// I2C address as per ov7251.txt linux documentation
|
|
reg = <0x60>;
|
|
|
|
// CAM3_RST_N
|
|
enable-gpios = <&tlmm 21 GPIO_ACTIVE_HIGH>;
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&cam3_default>;
|
|
|
|
clocks = <&clock_camcc CAM_CC_MCLK3_CLK>;
|
|
clock-names = "xclk";
|
|
clock-frequency = <24000000>;
|
|
|
|
/* The &vreg_s4a_1p8 trace always powered on.
|
|
*
|
|
* The 2.8V vdda-supply regulator is enabled when the
|
|
* vreg_s4a_1p8 trace is pulled high.
|
|
* It too is represented by a fixed regulator.
|
|
*
|
|
* No 1.2V vddd-supply regulator is used.
|
|
*/
|
|
vdddo-supply = <&vreg_lvs1a_1p8>;
|
|
vdda-supply = <&cam3_avdd_2v8>;
|
|
|
|
status = "disable";
|
|
|
|
port {
|
|
ov7251_ep: endpoint {
|
|
data-lanes = <0 1>;
|
|
// remote-endpoint = <&csiphy3_ep>;
|
|
};
|
|
};
|
|
};
|
|
};
|
|
|
|
/* PINCTRL - additions to nodes defined in sdm845.dtsi */
|
|
&qup_spi0_default {
|
|
config {
|
|
drive-strength = <6>;
|
|
bias-disable;
|
|
};
|
|
};
|