tresor.bessoh
/
linuxdebug
1
0
Fork 0
Code Issues Pull Requests Packages Projects Releases Wiki Activity
linuxdebug/arch/arm64/boot/dts/qcom/sa8295p-adp.dts

395 lines
8.0 KiB
Plaintext
Raw Blame History

// SPDX-License-Identifier: BSD-3-Clause
/*
* Copyright (c) 2021, The Linux Foundation. All rights reserved.
* Copyright (c) 2022, Linaro Limited
*/
/dts-v1/;
#include <dt-bindings/gpio/gpio.h>
#include <dt-bindings/regulator/qcom,rpmh-regulator.h>
#include <dt-bindings/spmi/spmi.h>
#include "sa8540p.dtsi"
/ {
model = "Qualcomm SA8295P ADP";
compatible = "qcom,sa8295p-adp", "qcom,sa8540p";
aliases {
serial0 = &qup2_uart17;
};
chosen {
stdout-path = "serial0:115200n8";
};
};
&apps_rsc {
pmm8540-a-regulators {
compatible = "qcom,pm8150-rpmh-regulators";
qcom,pmic-id = "a";
vreg_l3a: ldo3 {
regulator-name = "vreg_l3a";
regulator-min-microvolt = <1200000>;
regulator-max-microvolt = <1208000>;
regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
};
vreg_l5a: ldo5 {
regulator-name = "vreg_l5a";
regulator-min-microvolt = <912000>;
regulator-max-microvolt = <912000>;
regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
};
vreg_l7a: ldo7 {
regulator-name = "vreg_l7a";
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;
regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
};
vreg_l13a: ldo13 {
regulator-name = "vreg_l13a";
regulator-min-microvolt = <3072000>;
regulator-max-microvolt = <3072000>;
regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
};
};
pmm8540-c-regulators {
compatible = "qcom,pm8150-rpmh-regulators";
qcom,pmic-id = "c";
vreg_l1c: ldo1 {
regulator-name = "vreg_l1c";
regulator-min-microvolt = <912000>;
regulator-max-microvolt = <912000>;
regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
};
vreg_l2c: ldo2 {
regulator-name = "vreg_l2c";
regulator-min-microvolt = <3072000>;
regulator-max-microvolt = <3072000>;
regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
};
vreg_l3c: ldo3 {
regulator-name = "vreg_l3c";
regulator-min-microvolt = <1200000>;
regulator-max-microvolt = <1200000>;
regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
regulator-allow-set-load;
regulator-allowed-modes =
<RPMH_REGULATOR_MODE_LPM
RPMH_REGULATOR_MODE_HPM>;
};
vreg_l4c: ldo4 {
regulator-name = "vreg_l4c";
regulator-min-microvolt = <1200000>;
regulator-max-microvolt = <1208000>;
regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
};
vreg_l6c: ldo6 {
regulator-name = "vreg_l6c";
regulator-min-microvolt = <1200000>;
regulator-max-microvolt = <1200000>;
regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
regulator-allow-set-load;
regulator-allowed-modes =
<RPMH_REGULATOR_MODE_LPM
RPMH_REGULATOR_MODE_HPM>;
};
vreg_l7c: ldo7 {
regulator-name = "vreg_l7c";
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;
regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
};
vreg_l10c: ldo10 {
regulator-name = "vreg_l10c";
regulator-min-microvolt = <2504000>;
regulator-max-microvolt = <2504000>;
regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
regulator-allow-set-load;
regulator-allowed-modes =
<RPMH_REGULATOR_MODE_LPM
RPMH_REGULATOR_MODE_HPM>;
};
vreg_l17c: ldo17 {
regulator-name = "vreg_l17c";
regulator-min-microvolt = <2504000>;
regulator-max-microvolt = <2504000>;
regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
regulator-allow-set-load;
regulator-allowed-modes =
<RPMH_REGULATOR_MODE_LPM
RPMH_REGULATOR_MODE_HPM>;
};
};
pmm8540-g-regulators {
compatible = "qcom,pm8150-rpmh-regulators";
qcom,pmic-id = "g";
vreg_l3g: ldo3 {
regulator-name = "vreg_l3g";
regulator-min-microvolt = <1200000>;
regulator-max-microvolt = <1200000>;
regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
};
vreg_l7g: ldo7 {
regulator-name = "vreg_l7g";
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;
regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
};
vreg_l8g: ldo8 {
regulator-name = "vreg_l8g";
regulator-min-microvolt = <880000>;
regulator-max-microvolt = <880000>;
regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
};
};
};
&qup2 {
status = "okay";
};
&qup2_uart17 {
compatible = "qcom,geni-debug-uart";
status = "okay";
};
&remoteproc_adsp {
firmware-name = "qcom/sa8540p/adsp.mbn";
status = "okay";
};
&remoteproc_nsp0 {
firmware-name = "qcom/sa8540p/cdsp.mbn";
status = "okay";
};
&remoteproc_nsp1 {
firmware-name = "qcom/sa8540p/cdsp1.mbn";
status = "okay";
};
&spmi_bus {
pm8450a: pmic@0 {
compatible = "qcom,pm8150", "qcom,spmi-pmic";
reg = <0x0 SPMI_USID>;
#address-cells = <1>;
#size-cells = <0>;
pm8450a_gpios: gpio@c000 {
compatible = "qcom,pm8150-gpio", "qcom,spmi-gpio";
reg = <0xc000>;
gpio-controller;
gpio-ranges = <&pm8450a_gpios 0 0 10>;
#gpio-cells = <2>;
interrupt-controller;
#interrupt-cells = <2>;
};
};
pm8450c: pmic@4 {
compatible = "qcom,pm8150", "qcom,spmi-pmic";
reg = <0x4 SPMI_USID>;
#address-cells = <1>;
#size-cells = <0>;
pm8450c_gpios: gpio@c000 {
compatible = "qcom,pm8150-gpio", "qcom,spmi-gpio";
reg = <0xc000>;
gpio-controller;
gpio-ranges = <&pm8450c_gpios 0 0 10>;
#gpio-cells = <2>;
interrupt-controller;
#interrupt-cells = <2>;
};
};
pm8450e: pmic@8 {
compatible = "qcom,pm8150", "qcom,spmi-pmic";
reg = <0x8 SPMI_USID>;
#address-cells = <1>;
#size-cells = <0>;
pm8450e_gpios: gpio@c000 {
compatible = "qcom,pm8150-gpio", "qcom,spmi-gpio";
reg = <0xc000>;
gpio-controller;
gpio-ranges = <&pm8450e_gpios 0 0 10>;
#gpio-cells = <2>;
interrupt-controller;
#interrupt-cells = <2>;
};
};
pm8450g: pmic@c {
compatible = "qcom,pm8150", "qcom,spmi-pmic";
reg = <0xc SPMI_USID>;
#address-cells = <1>;
#size-cells = <0>;
pm8450g_gpios: gpio@c000 {
compatible = "qcom,pm8150-gpio", "qcom,spmi-gpio";
reg = <0xc000>;
gpio-controller;
gpio-ranges = <&pm8450g_gpios 0 0 10>;
#gpio-cells = <2>;
interrupt-controller;
#interrupt-cells = <2>;
};
};
};
&ufs_mem_hc {
reset-gpios = <&tlmm 228 GPIO_ACTIVE_LOW>;
vcc-supply = <&vreg_l17c>;
vcc-max-microamp = <800000>;
vccq-supply = <&vreg_l6c>;
vccq-max-microamp = <900000>;
status = "okay";
};
&ufs_mem_phy {
vdda-phy-supply = <&vreg_l8g>;
vdda-pll-supply = <&vreg_l3g>;
status = "okay";
};
&ufs_card_hc {
reset-gpios = <&tlmm 229 GPIO_ACTIVE_LOW>;
vcc-supply = <&vreg_l10c>;
vcc-max-microamp = <800000>;
vccq-supply = <&vreg_l3c>;
vccq-max-microamp = <900000>;
status = "okay";
};
&ufs_card_phy {
vdda-phy-supply = <&vreg_l8g>;
vdda-pll-supply = <&vreg_l3g>;
status = "okay";
};
&usb_0 {
status = "okay";
};
&usb_0_dwc3 {
/* TODO: Define USB-C connector properly */
dr_mode = "peripheral";
};
&usb_0_hsphy {
vdda-pll-supply = <&vreg_l5a>;
vdda18-supply = <&vreg_l7a>;
vdda33-supply = <&vreg_l13a>;
status = "okay";
};
&usb_0_qmpphy {
vdda-phy-supply = <&vreg_l3a>;
vdda-pll-supply = <&vreg_l5a>;
status = "okay";
};
&usb_1 {
status = "okay";
};
&usb_1_dwc3 {
/* TODO: Define USB-C connector properly */
dr_mode = "host";
};
&usb_1_hsphy {
vdda-pll-supply = <&vreg_l1c>;
vdda18-supply = <&vreg_l7c>;
vdda33-supply = <&vreg_l2c>;
status = "okay";
};
&usb_1_qmpphy {
vdda-phy-supply = <&vreg_l4c>;
vdda-pll-supply = <&vreg_l1c>;
status = "okay";
};
&usb_2_hsphy0 {
vdda-pll-supply = <&vreg_l5a>;
vdda18-supply = <&vreg_l7g>;
vdda33-supply = <&vreg_l13a>;
status = "okay";
};
&usb_2_hsphy1 {
vdda-pll-supply = <&vreg_l5a>;
vdda18-supply = <&vreg_l7g>;
vdda33-supply = <&vreg_l13a>;
status = "okay";
};
&usb_2_hsphy2 {
vdda-pll-supply = <&vreg_l5a>;
vdda18-supply = <&vreg_l7g>;
vdda33-supply = <&vreg_l13a>;
status = "okay";
};
&usb_2_hsphy3 {
vdda-pll-supply = <&vreg_l5a>;
vdda18-supply = <&vreg_l7g>;
vdda33-supply = <&vreg_l13a>;
status = "okay";
};
&usb_2_qmpphy0 {
vdda-phy-supply = <&vreg_l3a>;
vdda-pll-supply = <&vreg_l5a>;
status = "okay";
};
&usb_2_qmpphy1 {
vdda-phy-supply = <&vreg_l3a>;
vdda-pll-supply = <&vreg_l5a>;
status = "okay";
};
&xo_board_clk {
clock-frequency = <38400000>;
};
/* PINCTRL */
Reference in New Issue View Git Blame Copy Permalink