784 lines
19 KiB
Plaintext
784 lines
19 KiB
Plaintext
// SPDX-License-Identifier: BSD-3-Clause
|
|
/*
|
|
* SDX55 SoC device tree source
|
|
*
|
|
* Copyright (c) 2018, The Linux Foundation. All rights reserved.
|
|
* Copyright (c) 2020, Linaro Ltd.
|
|
*/
|
|
|
|
#include <dt-bindings/clock/qcom,gcc-sdx55.h>
|
|
#include <dt-bindings/clock/qcom,rpmh.h>
|
|
#include <dt-bindings/gpio/gpio.h>
|
|
#include <dt-bindings/interconnect/qcom,sdx55.h>
|
|
#include <dt-bindings/interrupt-controller/arm-gic.h>
|
|
#include <dt-bindings/power/qcom-rpmpd.h>
|
|
#include <dt-bindings/soc/qcom,rpmh-rsc.h>
|
|
|
|
/ {
|
|
#address-cells = <1>;
|
|
#size-cells = <1>;
|
|
qcom,msm-id = <357 0x10000>, <368 0x10000>, <418 0x10000>;
|
|
interrupt-parent = <&intc>;
|
|
|
|
memory {
|
|
device_type = "memory";
|
|
reg = <0 0>;
|
|
};
|
|
|
|
clocks {
|
|
xo_board: xo-board {
|
|
compatible = "fixed-clock";
|
|
#clock-cells = <0>;
|
|
clock-frequency = <38400000>;
|
|
clock-output-names = "xo_board";
|
|
};
|
|
|
|
sleep_clk: sleep-clk {
|
|
compatible = "fixed-clock";
|
|
#clock-cells = <0>;
|
|
clock-frequency = <32000>;
|
|
};
|
|
|
|
nand_clk_dummy: nand-clk-dummy {
|
|
compatible = "fixed-clock";
|
|
#clock-cells = <0>;
|
|
clock-frequency = <32000>;
|
|
};
|
|
};
|
|
|
|
cpus {
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
|
|
cpu0: cpu@0 {
|
|
device_type = "cpu";
|
|
compatible = "arm,cortex-a7";
|
|
reg = <0x0>;
|
|
enable-method = "psci";
|
|
clocks = <&apcs>;
|
|
power-domains = <&rpmhpd SDX55_CX>;
|
|
power-domain-names = "rpmhpd";
|
|
operating-points-v2 = <&cpu_opp_table>;
|
|
};
|
|
};
|
|
|
|
cpu_opp_table: cpu-opp-table {
|
|
compatible = "operating-points-v2";
|
|
opp-shared;
|
|
|
|
opp-345600000 {
|
|
opp-hz = /bits/ 64 <345600000>;
|
|
required-opps = <&rpmhpd_opp_low_svs>;
|
|
};
|
|
|
|
opp-576000000 {
|
|
opp-hz = /bits/ 64 <576000000>;
|
|
required-opps = <&rpmhpd_opp_svs>;
|
|
};
|
|
|
|
opp-1094400000 {
|
|
opp-hz = /bits/ 64 <1094400000>;
|
|
required-opps = <&rpmhpd_opp_nom>;
|
|
};
|
|
|
|
opp-1555200000 {
|
|
opp-hz = /bits/ 64 <1555200000>;
|
|
required-opps = <&rpmhpd_opp_turbo>;
|
|
};
|
|
};
|
|
|
|
firmware {
|
|
scm {
|
|
compatible = "qcom,scm-sdx55", "qcom,scm";
|
|
};
|
|
};
|
|
|
|
psci {
|
|
compatible = "arm,psci-1.0";
|
|
method = "smc";
|
|
};
|
|
|
|
reserved-memory {
|
|
#address-cells = <1>;
|
|
#size-cells = <1>;
|
|
ranges;
|
|
|
|
hyp_mem: memory@8fc00000 {
|
|
no-map;
|
|
reg = <0x8fc00000 0x80000>;
|
|
};
|
|
|
|
ac_db_mem: memory@8fc80000 {
|
|
no-map;
|
|
reg = <0x8fc80000 0x40000>;
|
|
};
|
|
|
|
secdata_mem: memory@8fcfd000 {
|
|
no-map;
|
|
reg = <0x8fcfd000 0x1000>;
|
|
};
|
|
|
|
sbl_mem: memory@8fd00000 {
|
|
no-map;
|
|
reg = <0x8fd00000 0x100000>;
|
|
};
|
|
|
|
aop_image: memory@8fe00000 {
|
|
no-map;
|
|
reg = <0x8fe00000 0x20000>;
|
|
};
|
|
|
|
aop_cmd_db: memory@8fe20000 {
|
|
compatible = "qcom,cmd-db";
|
|
reg = <0x8fe20000 0x20000>;
|
|
no-map;
|
|
};
|
|
|
|
smem_mem: memory@8fe40000 {
|
|
no-map;
|
|
reg = <0x8fe40000 0xc0000>;
|
|
};
|
|
|
|
tz_mem: memory@8ff00000 {
|
|
no-map;
|
|
reg = <0x8ff00000 0x100000>;
|
|
};
|
|
|
|
tz_apps_mem: memory@90000000 {
|
|
no-map;
|
|
reg = <0x90000000 0x500000>;
|
|
};
|
|
};
|
|
|
|
smem {
|
|
compatible = "qcom,smem";
|
|
memory-region = <&smem_mem>;
|
|
hwlocks = <&tcsr_mutex 3>;
|
|
};
|
|
|
|
smp2p-mpss {
|
|
compatible = "qcom,smp2p";
|
|
qcom,smem = <435>, <428>;
|
|
interrupts = <GIC_SPI 113 IRQ_TYPE_EDGE_RISING>;
|
|
mboxes = <&apcs 14>;
|
|
qcom,local-pid = <0>;
|
|
qcom,remote-pid = <1>;
|
|
|
|
modem_smp2p_out: master-kernel {
|
|
qcom,entry-name = "master-kernel";
|
|
#qcom,smem-state-cells = <1>;
|
|
};
|
|
|
|
modem_smp2p_in: slave-kernel {
|
|
qcom,entry-name = "slave-kernel";
|
|
interrupt-controller;
|
|
#interrupt-cells = <2>;
|
|
};
|
|
|
|
ipa_smp2p_out: ipa-ap-to-modem {
|
|
qcom,entry-name = "ipa";
|
|
#qcom,smem-state-cells = <1>;
|
|
};
|
|
|
|
ipa_smp2p_in: ipa-modem-to-ap {
|
|
qcom,entry-name = "ipa";
|
|
interrupt-controller;
|
|
#interrupt-cells = <2>;
|
|
};
|
|
};
|
|
|
|
soc: soc {
|
|
#address-cells = <1>;
|
|
#size-cells = <1>;
|
|
ranges;
|
|
compatible = "simple-bus";
|
|
|
|
gcc: clock-controller@100000 {
|
|
compatible = "qcom,gcc-sdx55";
|
|
reg = <0x100000 0x1f0000>;
|
|
#clock-cells = <1>;
|
|
#reset-cells = <1>;
|
|
#power-domain-cells = <1>;
|
|
clock-names = "bi_tcxo", "sleep_clk";
|
|
clocks = <&rpmhcc RPMH_CXO_CLK>, <&sleep_clk>;
|
|
};
|
|
|
|
blsp1_uart3: serial@831000 {
|
|
compatible = "qcom,msm-uartdm-v1.4", "qcom,msm-uartdm";
|
|
reg = <0x00831000 0x200>;
|
|
interrupts = <GIC_SPI 26 IRQ_TYPE_LEVEL_HIGH>;
|
|
clocks = <&gcc 30>,
|
|
<&gcc 9>;
|
|
clock-names = "core", "iface";
|
|
status = "disabled";
|
|
};
|
|
|
|
usb_hsphy: phy@ff4000 {
|
|
compatible = "qcom,usb-snps-hs-7nm-phy";
|
|
reg = <0x00ff4000 0x114>;
|
|
status = "disabled";
|
|
#phy-cells = <0>;
|
|
|
|
clocks = <&rpmhcc RPMH_CXO_CLK>;
|
|
clock-names = "ref";
|
|
|
|
resets = <&gcc GCC_QUSB2PHY_BCR>;
|
|
};
|
|
|
|
usb_qmpphy: phy@ff6000 {
|
|
compatible = "qcom,sdx55-qmp-usb3-uni-phy";
|
|
reg = <0x00ff6000 0x1c0>;
|
|
status = "disabled";
|
|
#address-cells = <1>;
|
|
#size-cells = <1>;
|
|
ranges;
|
|
|
|
clocks = <&gcc GCC_USB3_PHY_AUX_CLK>,
|
|
<&gcc GCC_USB_PHY_CFG_AHB2PHY_CLK>,
|
|
<&gcc GCC_USB3_PRIM_CLKREF_CLK>;
|
|
clock-names = "aux", "cfg_ahb", "ref";
|
|
|
|
resets = <&gcc GCC_USB3PHY_PHY_BCR>,
|
|
<&gcc GCC_USB3_PHY_BCR>;
|
|
reset-names = "phy", "common";
|
|
|
|
usb_ssphy: phy@ff6200 {
|
|
reg = <0x00ff6200 0x170>,
|
|
<0x00ff6400 0x200>,
|
|
<0x00ff6800 0x800>;
|
|
#phy-cells = <0>;
|
|
#clock-cells = <0>;
|
|
clocks = <&gcc GCC_USB3_PHY_PIPE_CLK>;
|
|
clock-names = "pipe0";
|
|
clock-output-names = "usb3_uni_phy_pipe_clk_src";
|
|
};
|
|
};
|
|
|
|
mc_virt: interconnect@1100000 {
|
|
compatible = "qcom,sdx55-mc-virt";
|
|
reg = <0x01100000 0x400000>;
|
|
#interconnect-cells = <1>;
|
|
qcom,bcm-voters = <&apps_bcm_voter>;
|
|
};
|
|
|
|
mem_noc: interconnect@9680000 {
|
|
compatible = "qcom,sdx55-mem-noc";
|
|
reg = <0x09680000 0x40000>;
|
|
#interconnect-cells = <1>;
|
|
qcom,bcm-voters = <&apps_bcm_voter>;
|
|
};
|
|
|
|
system_noc: interconnect@162c000 {
|
|
compatible = "qcom,sdx55-system-noc";
|
|
reg = <0x0162c000 0x31200>;
|
|
#interconnect-cells = <1>;
|
|
qcom,bcm-voters = <&apps_bcm_voter>;
|
|
};
|
|
|
|
qpic_bam: dma-controller@1b04000 {
|
|
compatible = "qcom,bam-v1.7.0";
|
|
reg = <0x01b04000 0x1c000>;
|
|
interrupts = <GIC_SPI 135 IRQ_TYPE_LEVEL_HIGH>;
|
|
clocks = <&rpmhcc RPMH_QPIC_CLK>;
|
|
clock-names = "bam_clk";
|
|
#dma-cells = <1>;
|
|
qcom,ee = <0>;
|
|
qcom,controlled-remotely;
|
|
status = "disabled";
|
|
};
|
|
|
|
qpic_nand: nand-controller@1b30000 {
|
|
compatible = "qcom,sdx55-nand";
|
|
reg = <0x01b30000 0x10000>;
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
clocks = <&rpmhcc RPMH_QPIC_CLK>,
|
|
<&nand_clk_dummy>;
|
|
clock-names = "core", "aon";
|
|
|
|
dmas = <&qpic_bam 0>,
|
|
<&qpic_bam 1>,
|
|
<&qpic_bam 2>;
|
|
dma-names = "tx", "rx", "cmd";
|
|
status = "disabled";
|
|
};
|
|
|
|
pcie_ep: pcie-ep@1c00000 {
|
|
compatible = "qcom,sdx55-pcie-ep";
|
|
reg = <0x01c00000 0x3000>,
|
|
<0x40000000 0xf1d>,
|
|
<0x40000f20 0xc8>,
|
|
<0x40001000 0x1000>,
|
|
<0x40200000 0x100000>,
|
|
<0x01c03000 0x3000>;
|
|
reg-names = "parf", "dbi", "elbi", "atu", "addr_space",
|
|
"mmio";
|
|
|
|
qcom,perst-regs = <&tcsr 0xb258 0xb270>;
|
|
|
|
clocks = <&gcc GCC_PCIE_AUX_CLK>,
|
|
<&gcc GCC_PCIE_CFG_AHB_CLK>,
|
|
<&gcc GCC_PCIE_MSTR_AXI_CLK>,
|
|
<&gcc GCC_PCIE_SLV_AXI_CLK>,
|
|
<&gcc GCC_PCIE_SLV_Q2A_AXI_CLK>,
|
|
<&gcc GCC_PCIE_SLEEP_CLK>,
|
|
<&gcc GCC_PCIE_0_CLKREF_CLK>;
|
|
clock-names = "aux", "cfg", "bus_master", "bus_slave",
|
|
"slave_q2a", "sleep", "ref";
|
|
|
|
interrupts = <GIC_SPI 140 IRQ_TYPE_LEVEL_HIGH>,
|
|
<GIC_SPI 145 IRQ_TYPE_LEVEL_HIGH>;
|
|
interrupt-names = "global", "doorbell";
|
|
reset-gpios = <&tlmm 57 GPIO_ACTIVE_LOW>;
|
|
wake-gpios = <&tlmm 53 GPIO_ACTIVE_LOW>;
|
|
resets = <&gcc GCC_PCIE_BCR>;
|
|
reset-names = "core";
|
|
power-domains = <&gcc PCIE_GDSC>;
|
|
phys = <&pcie0_lane>;
|
|
phy-names = "pciephy";
|
|
max-link-speed = <3>;
|
|
num-lanes = <2>;
|
|
|
|
status = "disabled";
|
|
};
|
|
|
|
pcie0_phy: phy@1c07000 {
|
|
compatible = "qcom,sdx55-qmp-pcie-phy";
|
|
reg = <0x01c07000 0x1c4>;
|
|
#address-cells = <1>;
|
|
#size-cells = <1>;
|
|
ranges;
|
|
clocks = <&gcc GCC_PCIE_AUX_PHY_CLK_SRC>,
|
|
<&gcc GCC_PCIE_CFG_AHB_CLK>,
|
|
<&gcc GCC_PCIE_0_CLKREF_CLK>,
|
|
<&gcc GCC_PCIE_RCHNG_PHY_CLK>;
|
|
clock-names = "aux", "cfg_ahb", "ref", "refgen";
|
|
|
|
resets = <&gcc GCC_PCIE_PHY_BCR>;
|
|
reset-names = "phy";
|
|
|
|
assigned-clocks = <&gcc GCC_PCIE_RCHNG_PHY_CLK>;
|
|
assigned-clock-rates = <100000000>;
|
|
|
|
status = "disabled";
|
|
|
|
pcie0_lane: lanes@1c06000 {
|
|
reg = <0x01c06000 0x104>, /* tx0 */
|
|
<0x01c06200 0x328>, /* rx0 */
|
|
<0x01c07200 0x1e8>, /* pcs */
|
|
<0x01c06800 0x104>, /* tx1 */
|
|
<0x01c06a00 0x328>, /* rx1 */
|
|
<0x01c07600 0x800>; /* pcs_misc */
|
|
clocks = <&gcc GCC_PCIE_PIPE_CLK>;
|
|
clock-names = "pipe0";
|
|
|
|
#phy-cells = <0>;
|
|
clock-output-names = "pcie_pipe_clk";
|
|
};
|
|
};
|
|
|
|
ipa: ipa@1e40000 {
|
|
compatible = "qcom,sdx55-ipa";
|
|
|
|
iommus = <&apps_smmu 0x5e0 0x0>,
|
|
<&apps_smmu 0x5e2 0x0>;
|
|
reg = <0x1e40000 0x7000>,
|
|
<0x1e50000 0x4b20>,
|
|
<0x1e04000 0x2c000>;
|
|
reg-names = "ipa-reg",
|
|
"ipa-shared",
|
|
"gsi";
|
|
|
|
interrupts-extended = <&intc GIC_SPI 241 IRQ_TYPE_EDGE_RISING>,
|
|
<&intc GIC_SPI 47 IRQ_TYPE_LEVEL_HIGH>,
|
|
<&ipa_smp2p_in 0 IRQ_TYPE_EDGE_RISING>,
|
|
<&ipa_smp2p_in 1 IRQ_TYPE_EDGE_RISING>;
|
|
interrupt-names = "ipa",
|
|
"gsi",
|
|
"ipa-clock-query",
|
|
"ipa-setup-ready";
|
|
|
|
clocks = <&rpmhcc RPMH_IPA_CLK>;
|
|
clock-names = "core";
|
|
|
|
interconnects = <&system_noc MASTER_IPA &mc_virt SLAVE_EBI_CH0>,
|
|
<&system_noc MASTER_IPA &system_noc SLAVE_OCIMEM>,
|
|
<&mem_noc MASTER_AMPSS_M0 &system_noc SLAVE_IPA_CFG>;
|
|
interconnect-names = "memory",
|
|
"imem",
|
|
"config";
|
|
|
|
qcom,smem-states = <&ipa_smp2p_out 0>,
|
|
<&ipa_smp2p_out 1>;
|
|
qcom,smem-state-names = "ipa-clock-enabled-valid",
|
|
"ipa-clock-enabled";
|
|
|
|
status = "disabled";
|
|
};
|
|
|
|
tcsr_mutex: hwlock@1f40000 {
|
|
compatible = "qcom,tcsr-mutex";
|
|
reg = <0x01f40000 0x40000>;
|
|
#hwlock-cells = <1>;
|
|
};
|
|
|
|
tcsr: syscon@1fcb000 {
|
|
compatible = "syscon";
|
|
reg = <0x01fc0000 0x1000>;
|
|
};
|
|
|
|
sdhc_1: mmc@8804000 {
|
|
compatible = "qcom,sdx55-sdhci", "qcom,sdhci-msm-v5";
|
|
reg = <0x08804000 0x1000>;
|
|
interrupts = <GIC_SPI 210 IRQ_TYPE_LEVEL_HIGH>,
|
|
<GIC_SPI 227 IRQ_TYPE_LEVEL_HIGH>;
|
|
interrupt-names = "hc_irq", "pwr_irq";
|
|
clocks = <&gcc GCC_SDCC1_AHB_CLK>,
|
|
<&gcc GCC_SDCC1_APPS_CLK>;
|
|
clock-names = "iface", "core";
|
|
status = "disabled";
|
|
};
|
|
|
|
remoteproc_mpss: remoteproc@4080000 {
|
|
compatible = "qcom,sdx55-mpss-pas";
|
|
reg = <0x04080000 0x4040>;
|
|
|
|
interrupts-extended = <&intc GIC_SPI 250 IRQ_TYPE_EDGE_RISING>,
|
|
<&modem_smp2p_in 0 IRQ_TYPE_EDGE_RISING>,
|
|
<&modem_smp2p_in 1 IRQ_TYPE_EDGE_RISING>,
|
|
<&modem_smp2p_in 2 IRQ_TYPE_EDGE_RISING>,
|
|
<&modem_smp2p_in 3 IRQ_TYPE_EDGE_RISING>,
|
|
<&modem_smp2p_in 7 IRQ_TYPE_EDGE_RISING>;
|
|
interrupt-names = "wdog", "fatal", "ready", "handover",
|
|
"stop-ack", "shutdown-ack";
|
|
|
|
clocks = <&rpmhcc RPMH_CXO_CLK>;
|
|
clock-names = "xo";
|
|
|
|
power-domains = <&rpmhpd SDX55_CX>,
|
|
<&rpmhpd SDX55_MSS>;
|
|
power-domain-names = "cx", "mss";
|
|
|
|
qcom,smem-states = <&modem_smp2p_out 0>;
|
|
qcom,smem-state-names = "stop";
|
|
|
|
status = "disabled";
|
|
|
|
glink-edge {
|
|
interrupts = <GIC_SPI 114 IRQ_TYPE_EDGE_RISING>;
|
|
label = "mpss";
|
|
qcom,remote-pid = <1>;
|
|
mboxes = <&apcs 15>;
|
|
};
|
|
};
|
|
|
|
usb: usb@a6f8800 {
|
|
compatible = "qcom,sdx55-dwc3", "qcom,dwc3";
|
|
reg = <0x0a6f8800 0x400>;
|
|
status = "disabled";
|
|
#address-cells = <1>;
|
|
#size-cells = <1>;
|
|
ranges;
|
|
|
|
clocks = <&gcc GCC_USB30_SLV_AHB_CLK>,
|
|
<&gcc GCC_USB30_MASTER_CLK>,
|
|
<&gcc GCC_USB30_MSTR_AXI_CLK>,
|
|
<&gcc GCC_USB30_SLEEP_CLK>,
|
|
<&gcc GCC_USB30_MOCK_UTMI_CLK>;
|
|
clock-names = "cfg_noc",
|
|
"core",
|
|
"iface",
|
|
"sleep",
|
|
"mock_utmi";
|
|
|
|
assigned-clocks = <&gcc GCC_USB30_MOCK_UTMI_CLK>,
|
|
<&gcc GCC_USB30_MASTER_CLK>;
|
|
assigned-clock-rates = <19200000>, <200000000>;
|
|
|
|
interrupts = <GIC_SPI 131 IRQ_TYPE_LEVEL_HIGH>,
|
|
<GIC_SPI 198 IRQ_TYPE_LEVEL_HIGH>,
|
|
<GIC_SPI 158 IRQ_TYPE_LEVEL_HIGH>,
|
|
<GIC_SPI 157 IRQ_TYPE_LEVEL_HIGH>;
|
|
interrupt-names = "hs_phy_irq", "ss_phy_irq",
|
|
"dm_hs_phy_irq", "dp_hs_phy_irq";
|
|
|
|
power-domains = <&gcc USB30_GDSC>;
|
|
|
|
resets = <&gcc GCC_USB30_BCR>;
|
|
|
|
usb_dwc3: dwc3@a600000 {
|
|
compatible = "snps,dwc3";
|
|
reg = <0x0a600000 0xcd00>;
|
|
interrupts = <GIC_SPI 133 IRQ_TYPE_LEVEL_HIGH>;
|
|
iommus = <&apps_smmu 0x1a0 0x0>;
|
|
snps,dis_u2_susphy_quirk;
|
|
snps,dis_enblslpm_quirk;
|
|
phys = <&usb_hsphy>, <&usb_ssphy>;
|
|
phy-names = "usb2-phy", "usb3-phy";
|
|
};
|
|
};
|
|
|
|
pdc: interrupt-controller@b210000 {
|
|
compatible = "qcom,sdx55-pdc", "qcom,pdc";
|
|
reg = <0x0b210000 0x30000>;
|
|
qcom,pdc-ranges = <0 179 52>;
|
|
#interrupt-cells = <3>;
|
|
interrupt-parent = <&intc>;
|
|
interrupt-controller;
|
|
};
|
|
|
|
restart@c264000 {
|
|
compatible = "qcom,pshold";
|
|
reg = <0x0c264000 0x1000>;
|
|
};
|
|
|
|
spmi_bus: spmi@c440000 {
|
|
compatible = "qcom,spmi-pmic-arb";
|
|
reg = <0x0c440000 0x0000d00>,
|
|
<0x0c600000 0x2000000>,
|
|
<0x0e600000 0x0100000>,
|
|
<0x0e700000 0x00a0000>,
|
|
<0x0c40a000 0x0000700>;
|
|
reg-names = "core", "chnls", "obsrvr", "intr", "cnfg";
|
|
interrupt-names = "periph_irq";
|
|
interrupts = <GIC_SPI 148 IRQ_TYPE_LEVEL_HIGH>;
|
|
qcom,ee = <0>;
|
|
qcom,channel = <0>;
|
|
#address-cells = <2>;
|
|
#size-cells = <0>;
|
|
interrupt-controller;
|
|
#interrupt-cells = <4>;
|
|
cell-index = <0>;
|
|
};
|
|
|
|
tlmm: pinctrl@f100000 {
|
|
compatible = "qcom,sdx55-pinctrl";
|
|
reg = <0xf100000 0x300000>;
|
|
interrupts = <GIC_SPI 212 IRQ_TYPE_LEVEL_HIGH>;
|
|
gpio-controller;
|
|
#gpio-cells = <2>;
|
|
interrupt-controller;
|
|
#interrupt-cells = <2>;
|
|
};
|
|
|
|
sram@1468f000 {
|
|
compatible = "qcom,sdx55-imem", "syscon", "simple-mfd";
|
|
reg = <0x1468f000 0x1000>;
|
|
|
|
#address-cells = <1>;
|
|
#size-cells = <1>;
|
|
|
|
ranges = <0x0 0x1468f000 0x1000>;
|
|
|
|
pil-reloc@94c {
|
|
compatible = "qcom,pil-reloc-info";
|
|
reg = <0x94c 0x200>;
|
|
};
|
|
};
|
|
|
|
apps_smmu: iommu@15000000 {
|
|
compatible = "qcom,sdx55-smmu-500", "qcom,smmu-500", "arm,mmu-500";
|
|
reg = <0x15000000 0x20000>;
|
|
#iommu-cells = <2>;
|
|
#global-interrupts = <1>;
|
|
interrupts = <GIC_SPI 65 IRQ_TYPE_LEVEL_HIGH>,
|
|
<GIC_SPI 70 IRQ_TYPE_LEVEL_HIGH>,
|
|
<GIC_SPI 71 IRQ_TYPE_LEVEL_HIGH>,
|
|
<GIC_SPI 72 IRQ_TYPE_LEVEL_HIGH>,
|
|
<GIC_SPI 73 IRQ_TYPE_LEVEL_HIGH>,
|
|
<GIC_SPI 94 IRQ_TYPE_LEVEL_HIGH>,
|
|
<GIC_SPI 95 IRQ_TYPE_LEVEL_HIGH>,
|
|
<GIC_SPI 96 IRQ_TYPE_LEVEL_HIGH>,
|
|
<GIC_SPI 97 IRQ_TYPE_LEVEL_HIGH>,
|
|
<GIC_SPI 98 IRQ_TYPE_LEVEL_HIGH>,
|
|
<GIC_SPI 99 IRQ_TYPE_LEVEL_HIGH>,
|
|
<GIC_SPI 100 IRQ_TYPE_LEVEL_HIGH>,
|
|
<GIC_SPI 101 IRQ_TYPE_LEVEL_HIGH>,
|
|
<GIC_SPI 102 IRQ_TYPE_LEVEL_HIGH>,
|
|
<GIC_SPI 103 IRQ_TYPE_LEVEL_HIGH>,
|
|
<GIC_SPI 104 IRQ_TYPE_LEVEL_HIGH>,
|
|
<GIC_SPI 105 IRQ_TYPE_LEVEL_HIGH>;
|
|
};
|
|
|
|
intc: interrupt-controller@17800000 {
|
|
compatible = "qcom,msm-qgic2";
|
|
interrupt-controller;
|
|
interrupt-parent = <&intc>;
|
|
#interrupt-cells = <3>;
|
|
reg = <0x17800000 0x1000>,
|
|
<0x17802000 0x1000>;
|
|
};
|
|
|
|
a7pll: clock@17808000 {
|
|
compatible = "qcom,sdx55-a7pll";
|
|
reg = <0x17808000 0x1000>;
|
|
clocks = <&rpmhcc RPMH_CXO_CLK>;
|
|
clock-names = "bi_tcxo";
|
|
#clock-cells = <0>;
|
|
};
|
|
|
|
apcs: mailbox@17810000 {
|
|
compatible = "qcom,sdx55-apcs-gcc", "syscon";
|
|
reg = <0x17810000 0x2000>;
|
|
#mbox-cells = <1>;
|
|
clocks = <&rpmhcc RPMH_CXO_CLK>, <&a7pll>, <&gcc GPLL0>;
|
|
clock-names = "ref", "pll", "aux";
|
|
#clock-cells = <0>;
|
|
};
|
|
|
|
watchdog@17817000 {
|
|
compatible = "qcom,apss-wdt-sdx55", "qcom,kpss-wdt";
|
|
reg = <0x17817000 0x1000>;
|
|
clocks = <&sleep_clk>;
|
|
};
|
|
|
|
timer@17820000 {
|
|
#address-cells = <1>;
|
|
#size-cells = <1>;
|
|
ranges;
|
|
compatible = "arm,armv7-timer-mem";
|
|
reg = <0x17820000 0x1000>;
|
|
clock-frequency = <19200000>;
|
|
|
|
frame@17821000 {
|
|
frame-number = <0>;
|
|
interrupts = <GIC_SPI 7 0x4>,
|
|
<GIC_SPI 6 0x4>;
|
|
reg = <0x17821000 0x1000>,
|
|
<0x17822000 0x1000>;
|
|
};
|
|
|
|
frame@17823000 {
|
|
frame-number = <1>;
|
|
interrupts = <GIC_SPI 8 0x4>;
|
|
reg = <0x17823000 0x1000>;
|
|
status = "disabled";
|
|
};
|
|
|
|
frame@17824000 {
|
|
frame-number = <2>;
|
|
interrupts = <GIC_SPI 9 0x4>;
|
|
reg = <0x17824000 0x1000>;
|
|
status = "disabled";
|
|
};
|
|
|
|
frame@17825000 {
|
|
frame-number = <3>;
|
|
interrupts = <GIC_SPI 10 0x4>;
|
|
reg = <0x17825000 0x1000>;
|
|
status = "disabled";
|
|
};
|
|
|
|
frame@17826000 {
|
|
frame-number = <4>;
|
|
interrupts = <GIC_SPI 11 0x4>;
|
|
reg = <0x17826000 0x1000>;
|
|
status = "disabled";
|
|
};
|
|
|
|
frame@17827000 {
|
|
frame-number = <5>;
|
|
interrupts = <GIC_SPI 12 0x4>;
|
|
reg = <0x17827000 0x1000>;
|
|
status = "disabled";
|
|
};
|
|
|
|
frame@17828000 {
|
|
frame-number = <6>;
|
|
interrupts = <GIC_SPI 13 0x4>;
|
|
reg = <0x17828000 0x1000>;
|
|
status = "disabled";
|
|
};
|
|
|
|
frame@17829000 {
|
|
frame-number = <7>;
|
|
interrupts = <GIC_SPI 14 0x4>;
|
|
reg = <0x17829000 0x1000>;
|
|
status = "disabled";
|
|
};
|
|
};
|
|
|
|
apps_rsc: rsc@17840000 {
|
|
compatible = "qcom,rpmh-rsc";
|
|
reg = <0x17830000 0x10000>, <0x17840000 0x10000>;
|
|
reg-names = "drv-0", "drv-1";
|
|
interrupts = <GIC_SPI 16 IRQ_TYPE_LEVEL_HIGH>,
|
|
<GIC_SPI 17 IRQ_TYPE_LEVEL_HIGH>;
|
|
qcom,tcs-offset = <0xd00>;
|
|
qcom,drv-id = <1>;
|
|
qcom,tcs-config = <ACTIVE_TCS 2>, <SLEEP_TCS 2>,
|
|
<WAKE_TCS 2>, <CONTROL_TCS 1>;
|
|
|
|
rpmhcc: clock-controller {
|
|
compatible = "qcom,sdx55-rpmh-clk";
|
|
#clock-cells = <1>;
|
|
clock-names = "xo";
|
|
clocks = <&xo_board>;
|
|
};
|
|
|
|
rpmhpd: power-controller {
|
|
compatible = "qcom,sdx55-rpmhpd";
|
|
#power-domain-cells = <1>;
|
|
operating-points-v2 = <&rpmhpd_opp_table>;
|
|
|
|
rpmhpd_opp_table: opp-table {
|
|
compatible = "operating-points-v2";
|
|
|
|
rpmhpd_opp_ret: opp1 {
|
|
opp-level = <RPMH_REGULATOR_LEVEL_RETENTION>;
|
|
};
|
|
|
|
rpmhpd_opp_min_svs: opp2 {
|
|
opp-level = <RPMH_REGULATOR_LEVEL_MIN_SVS>;
|
|
};
|
|
|
|
rpmhpd_opp_low_svs: opp3 {
|
|
opp-level = <RPMH_REGULATOR_LEVEL_LOW_SVS>;
|
|
};
|
|
|
|
rpmhpd_opp_svs: opp4 {
|
|
opp-level = <RPMH_REGULATOR_LEVEL_SVS>;
|
|
};
|
|
|
|
rpmhpd_opp_svs_l1: opp5 {
|
|
opp-level = <RPMH_REGULATOR_LEVEL_SVS_L1>;
|
|
};
|
|
|
|
rpmhpd_opp_nom: opp6 {
|
|
opp-level = <RPMH_REGULATOR_LEVEL_NOM>;
|
|
};
|
|
|
|
rpmhpd_opp_nom_l1: opp7 {
|
|
opp-level = <RPMH_REGULATOR_LEVEL_NOM_L1>;
|
|
};
|
|
|
|
rpmhpd_opp_nom_l2: opp8 {
|
|
opp-level = <RPMH_REGULATOR_LEVEL_NOM_L2>;
|
|
};
|
|
|
|
rpmhpd_opp_turbo: opp9 {
|
|
opp-level = <RPMH_REGULATOR_LEVEL_TURBO>;
|
|
};
|
|
|
|
rpmhpd_opp_turbo_l1: opp10 {
|
|
opp-level = <RPMH_REGULATOR_LEVEL_TURBO_L1>;
|
|
};
|
|
};
|
|
};
|
|
|
|
apps_bcm_voter: bcm-voter {
|
|
compatible = "qcom,bcm-voter";
|
|
};
|
|
};
|
|
};
|
|
|
|
timer {
|
|
compatible = "arm,armv7-timer";
|
|
interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
|
|
<GIC_PPI 12 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
|
|
<GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
|
|
<GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>;
|
|
clock-frequency = <19200000>;
|
|
};
|
|
};
|