414 lines
9.2 KiB
Plaintext
414 lines
9.2 KiB
Plaintext
// SPDX-License-Identifier: GPL-2.0 or MIT
|
|
//
|
|
// Device Tree Source for General Electric B1x5Pv2
|
|
// patient monitor series
|
|
//
|
|
// Copyright 2018-2021 General Electric Company
|
|
// Copyright 2018-2021 Collabora
|
|
|
|
#include <dt-bindings/input/input.h>
|
|
#include "imx6dl-qmx6.dtsi"
|
|
|
|
/ {
|
|
chosen {
|
|
stdout-path = &uart3;
|
|
};
|
|
|
|
/* Do not allow frequencies above 800MHz */
|
|
cpus {
|
|
cpu@0 {
|
|
operating-points = <
|
|
/* kHz uV */
|
|
792000 1175000
|
|
396000 1150000
|
|
>;
|
|
fsl,soc-operating-points = <
|
|
/* ARM kHz SOC-PU uV */
|
|
792000 1175000
|
|
396000 1175000
|
|
>;
|
|
};
|
|
|
|
cpu@1 {
|
|
operating-points = <
|
|
/* kHz uV */
|
|
792000 1175000
|
|
396000 1150000
|
|
>;
|
|
fsl,soc-operating-points = <
|
|
/* ARM kHz SOC-PU uV */
|
|
792000 1175000
|
|
396000 1175000
|
|
>;
|
|
};
|
|
};
|
|
|
|
reg_syspwr: regulator-12v {
|
|
compatible = "regulator-fixed";
|
|
regulator-name = "SYS_PWR";
|
|
regulator-min-microvolt = <12000000>;
|
|
regulator-max-microvolt = <12000000>;
|
|
};
|
|
|
|
reg_5v_pmc: regulator-5v-pmc {
|
|
compatible = "regulator-fixed";
|
|
regulator-name = "5V PMC";
|
|
regulator-min-microvolt = <5000000>;
|
|
regulator-max-microvolt = <5000000>;
|
|
vin-supply = <®_syspwr>;
|
|
};
|
|
|
|
reg_5v: regulator-5v {
|
|
compatible = "regulator-fixed";
|
|
regulator-name = "5V";
|
|
regulator-min-microvolt = <5000000>;
|
|
regulator-max-microvolt = <5000000>;
|
|
vin-supply = <®_syspwr>;
|
|
};
|
|
|
|
reg_3v3: regulator-3v3 {
|
|
compatible = "regulator-fixed";
|
|
regulator-name = "3V3";
|
|
regulator-min-microvolt = <3300000>;
|
|
regulator-max-microvolt = <3300000>;
|
|
vin-supply = <®_syspwr>;
|
|
};
|
|
|
|
reg_5v0_audio: regulator-5v0-audio {
|
|
compatible = "regulator-fixed";
|
|
regulator-name = "5V0_AUDIO";
|
|
regulator-min-microvolt = <5000000>;
|
|
regulator-max-microvolt = <5000000>;
|
|
vin-supply = <®_5v>;
|
|
gpio = <&tca6424a 16 GPIO_ACTIVE_HIGH>;
|
|
enable-active-high;
|
|
/*
|
|
* This must be always-on for da7212, which has some not
|
|
* properly documented dependencies for it's speaker supply
|
|
* pin. The issue manifests as speaker volume being very low.
|
|
*/
|
|
regulator-always-on;
|
|
};
|
|
|
|
|
|
reg_3v3_audio: regulator-3v3-audio {
|
|
compatible = "regulator-fixed";
|
|
regulator-name = "3V3_AUDIO";
|
|
regulator-min-microvolt = <3300000>;
|
|
regulator-max-microvolt = <3300000>;
|
|
vin-supply = <®_3v3>;
|
|
pinctrl-0 = <&pinctrl_q7_hda_reset>;
|
|
pinctrl-names = "default";
|
|
gpio = <&gpio6 8 GPIO_ACTIVE_HIGH>;
|
|
enable-active-high;
|
|
};
|
|
|
|
reg_2v5_audio: regulator-2v5-audio {
|
|
compatible = "regulator-fixed";
|
|
regulator-name = "2V5_AUDIO";
|
|
regulator-min-microvolt = <2500000>;
|
|
regulator-max-microvolt = <2500000>;
|
|
regulator-always-on;
|
|
vin-supply = <®_3v3_audio>;
|
|
|
|
};
|
|
|
|
reg_wlan: regulator-wlan {
|
|
compatible = "regulator-fixed";
|
|
regulator-name = "WLAN";
|
|
regulator-min-microvolt = <3300000>;
|
|
regulator-max-microvolt = <3300000>;
|
|
vin-supply = <®_3v3>;
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&pinctrl_q7_sdio_power>;
|
|
gpio = <&gpio4 30 GPIO_ACTIVE_HIGH>;
|
|
enable-active-high;
|
|
startup-delay-us = <70000>;
|
|
};
|
|
|
|
reg_bl: regulator-backlight {
|
|
compatible = "regulator-fixed";
|
|
regulator-name = "LED_VCC";
|
|
regulator-min-microvolt = <12000000>;
|
|
regulator-max-microvolt = <12000000>;
|
|
vin-supply = <®_syspwr>;
|
|
pinctrl-0 = <&pinctrl_q7_lcd_power>;
|
|
pinctrl-names = "default";
|
|
gpio = <&gpio1 7 GPIO_ACTIVE_HIGH>;
|
|
enable-active-high;
|
|
};
|
|
|
|
reg_lcd: regulator-lcd {
|
|
compatible = "regulator-fixed";
|
|
regulator-name = "LCD_5V";
|
|
regulator-min-microvolt = <5000000>;
|
|
regulator-max-microvolt = <5000000>;
|
|
vin-supply = <®_5v>;
|
|
};
|
|
|
|
usb_power: regulator-usb-power {
|
|
compatible = "regulator-fixed";
|
|
regulator-name = "USB POWER";
|
|
regulator-min-microvolt = <5000000>;
|
|
regulator-max-microvolt = <5000000>;
|
|
vin-supply = <®_5v>;
|
|
};
|
|
|
|
charger: battery-charger {
|
|
compatible = "gpio-charger"; /* ti,bq24172 */
|
|
charger-type = "mains";
|
|
gpios = <&tca6424a 3 GPIO_ACTIVE_LOW>;
|
|
charge-current-limit-gpios = <&tca6424a 11 GPIO_ACTIVE_HIGH>,
|
|
<&tca6424a 12 GPIO_ACTIVE_HIGH>;
|
|
charge-current-limit-mapping = <1300000 0x0>,
|
|
<700000 0x1>,
|
|
<0 0x2>;
|
|
charge-status-gpios = <&tca6424a 6 GPIO_ACTIVE_HIGH>;
|
|
};
|
|
|
|
poweroff {
|
|
compatible = "gpio-poweroff";
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&pinctrl_q7_spi_cs1>;
|
|
gpios = <&gpio4 25 GPIO_ACTIVE_LOW>;
|
|
};
|
|
|
|
power-button-key {
|
|
compatible = "gpio-keys";
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&pinctrl_q7_sleep_button>;
|
|
|
|
power-button {
|
|
label = "power button";
|
|
gpios = <&gpio4 7 GPIO_ACTIVE_LOW>;
|
|
linux,code = <KEY_POWER>;
|
|
};
|
|
};
|
|
|
|
rotary-encoder-key {
|
|
compatible = "gpio-keys";
|
|
|
|
rotary-encoder-event {
|
|
label = "rotary-encoder press";
|
|
gpios = <&tca6424a 0 GPIO_ACTIVE_HIGH>;
|
|
linux,code = <KEY_ENTER>;
|
|
linux,can-disable;
|
|
};
|
|
};
|
|
|
|
rotary-encoder {
|
|
compatible = "rotary-encoder";
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&pinctrl_q7_gpio2 &pinctrl_q7_gpio4>;
|
|
gpios = <&gpio4 26 GPIO_ACTIVE_LOW>, <&gpio1 0 GPIO_ACTIVE_LOW>;
|
|
rotary-encoder,relative-axis;
|
|
rotary-encoder,steps-per-period = <2>;
|
|
wakeup-source;
|
|
};
|
|
|
|
leds {
|
|
compatible = "gpio-leds";
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&pinctrl_q7_gpio1 &pinctrl_q7_gpio3 &pinctrl_q7_gpio5>;
|
|
|
|
led-alarm1 {
|
|
label = "alarm:red";
|
|
gpios = <&gpio1 8 GPIO_ACTIVE_HIGH>;
|
|
};
|
|
|
|
led-alarm2 {
|
|
label = "alarm:yellow";
|
|
gpios = <&gpio4 27 GPIO_ACTIVE_HIGH>;
|
|
};
|
|
|
|
led-alarm3 {
|
|
label = "alarm:blue";
|
|
gpios = <&gpio4 15 GPIO_ACTIVE_HIGH>;
|
|
};
|
|
};
|
|
|
|
backlight: backlight {
|
|
compatible = "pwm-backlight";
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&pinctrl_q7_backlight_enable>;
|
|
power-supply = <®_bl>;
|
|
pwms = <&pwm4 0 5000000 0>;
|
|
brightness-levels = <0 255>;
|
|
num-interpolated-steps = <255>;
|
|
default-brightness-level = <179>;
|
|
enable-gpios = <&gpio1 9 GPIO_ACTIVE_HIGH>;
|
|
};
|
|
|
|
panel {
|
|
backlight = <&backlight>;
|
|
power-supply = <®_lcd>;
|
|
|
|
port {
|
|
panel_in: endpoint {
|
|
remote-endpoint = <&lvds0_out>;
|
|
};
|
|
};
|
|
};
|
|
|
|
sound {
|
|
compatible = "simple-audio-card";
|
|
simple-audio-card,name = "audio-card";
|
|
simple-audio-card,format = "i2s";
|
|
simple-audio-card,bitclock-master = <&dailink_master>;
|
|
simple-audio-card,frame-master = <&dailink_master>;
|
|
simple-audio-card,widgets = "Speaker", "Ext Spk";
|
|
simple-audio-card,audio-routing = "Ext Spk", "LINE";
|
|
|
|
simple-audio-card,cpu {
|
|
sound-dai = <&ssi1>;
|
|
};
|
|
|
|
dailink_master: simple-audio-card,codec {
|
|
sound-dai = <&codec>;
|
|
};
|
|
};
|
|
|
|
clk_ext_audio_codec: clock-codec {
|
|
compatible = "fixed-clock";
|
|
#clock-cells = <0>;
|
|
clock-frequency = <12288000>;
|
|
};
|
|
};
|
|
|
|
&audmux {
|
|
status = "okay";
|
|
};
|
|
|
|
&fec {
|
|
status = "okay";
|
|
};
|
|
|
|
&hdmi {
|
|
status = "okay";
|
|
};
|
|
|
|
&i2c1 {
|
|
battery: battery@b {
|
|
compatible = "ti,bq20z65", "sbs,sbs-battery";
|
|
reg = <0x0b>;
|
|
sbs,battery-detect-gpios = <&tca6424a 5 GPIO_ACTIVE_LOW>;
|
|
sbs,i2c-retry-count = <5>;
|
|
power-supplies = <&charger>;
|
|
};
|
|
|
|
codec: audio-codec@1a {
|
|
compatible = "dlg,da7212";
|
|
reg = <0x1a>;
|
|
#sound-dai-cells = <0>;
|
|
VDDA-supply = <®_2v5_audio>;
|
|
VDDSP-supply = <®_5v0_audio>;
|
|
VDDMIC-supply = <®_3v3_audio>;
|
|
VDDIO-supply = <®_3v3_audio>;
|
|
clocks = <&clk_ext_audio_codec>;
|
|
clock-names = "mclk";
|
|
};
|
|
};
|
|
|
|
&i2c5 {
|
|
tca6424a: gpio-controller@22 {
|
|
compatible = "ti,tca6424";
|
|
reg = <0x22>;
|
|
gpio-controller;
|
|
#gpio-cells = <2>;
|
|
vcc-supply = <®_3v3>;
|
|
interrupt-parent = <&gpio7>;
|
|
interrupts = <11 IRQ_TYPE_LEVEL_LOW>;
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&pinctrl_q7_gpio6>;
|
|
interrupt-controller;
|
|
#interrupt-cells = <2>;
|
|
gpio-line-names = "GPIO_ROTOR#", "ACM_IO_INT", "TMP_SENSOR_IRQ", "AC_IN",
|
|
"TF_S", "BATT_T", "LED_INC_CHAR", "ACM1_OCF",
|
|
"ACM2_OCF", "ACM_IO_RST", "USB1_POWER_EN", "EGPIO_CC_CTL0",
|
|
"EGPIO_CC_CTL1", "12V_OEMNBP_EN", "CP2105_RST", "",
|
|
"SPEAKER_PA_EN", "ARM7_UPI_RESET", "ARM7_PWR_RST", "NURSE_CALL",
|
|
"MARKER_EN", "EGPIO_TOUCH_RST", "PRESSURE_INT1", "PRESSURE_INT2";
|
|
|
|
};
|
|
|
|
tmp75: temperature-sensor@48 {
|
|
compatible = "ti,tmp75";
|
|
reg = <0x48>;
|
|
vs-supply = <®_3v3>;
|
|
interrupt-parent = <&tca6424a>;
|
|
interrupts = <2 IRQ_TYPE_EDGE_FALLING>;
|
|
};
|
|
};
|
|
|
|
&ldb {
|
|
status = "okay";
|
|
|
|
lvds0: lvds-channel@0 {
|
|
status = "okay";
|
|
fsl,data-mapping = "spwg";
|
|
fsl,data-width = <24>;
|
|
|
|
port@4 {
|
|
reg = <4>;
|
|
|
|
lvds0_out: endpoint {
|
|
remote-endpoint = <&panel_in>;
|
|
};
|
|
};
|
|
};
|
|
};
|
|
|
|
&pwm4 {
|
|
status = "okay";
|
|
};
|
|
|
|
&ssi1 {
|
|
fsl,mode = "i2s-slave";
|
|
status = "okay";
|
|
};
|
|
|
|
&usbotg {
|
|
vbus-supply = <&usb_power>;
|
|
disable-over-current;
|
|
dr_mode = "host";
|
|
status = "okay";
|
|
|
|
/*
|
|
* TPS2051BDGN fault-gpio is connected to Q7[86] USB_0_1_OC_N.
|
|
* On QMX6 this is not connceted to the i.MX6, but to the USB Hub
|
|
* from &usbh1. This means, that we cannot easily detect and handle
|
|
* over-current events. Fortunately the regulator limits the current
|
|
* automatically, so the hardware is still protected.
|
|
*/
|
|
};
|
|
|
|
&usdhc4 {
|
|
/* WiFi module */
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&pinctrl_usdhc4>;
|
|
bus-width = <4>;
|
|
no-1-8-v;
|
|
non-removable;
|
|
wakeup-source;
|
|
keep-power-in-suspend;
|
|
cap-power-off-card;
|
|
max-frequency = <25000000>;
|
|
vmmc-supply = <®_wlan>;
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
status = "okay";
|
|
|
|
wlcore: wlcore@2 {
|
|
compatible = "ti,wl1837";
|
|
reg = <2>;
|
|
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&pinctrl_q7_gpio7>;
|
|
|
|
interrupt-parent = <&gpio4>;
|
|
interrupts = <14 IRQ_TYPE_LEVEL_HIGH>;
|
|
|
|
tcxo-clock-frequency = <26000000>;
|
|
};
|
|
};
|