290 lines
11 KiB
ReStructuredText
290 lines
11 KiB
ReStructuredText
.. SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
|
|
|
|
====================================
|
|
Marvell OcteonTx2 RVU Kernel Drivers
|
|
====================================
|
|
|
|
Copyright (c) 2020 Marvell International Ltd.
|
|
|
|
Contents
|
|
========
|
|
|
|
- `Overview`_
|
|
- `Drivers`_
|
|
- `Basic packet flow`_
|
|
- `Devlink health reporters`_
|
|
|
|
Overview
|
|
========
|
|
|
|
Resource virtualization unit (RVU) on Marvell's OcteonTX2 SOC maps HW
|
|
resources from the network, crypto and other functional blocks into
|
|
PCI-compatible physical and virtual functions. Each functional block
|
|
again has multiple local functions (LFs) for provisioning to PCI devices.
|
|
RVU supports multiple PCIe SRIOV physical functions (PFs) and virtual
|
|
functions (VFs). PF0 is called the administrative / admin function (AF)
|
|
and has privileges to provision RVU functional block's LFs to each of the
|
|
PF/VF.
|
|
|
|
RVU managed networking functional blocks
|
|
- Network pool or buffer allocator (NPA)
|
|
- Network interface controller (NIX)
|
|
- Network parser CAM (NPC)
|
|
- Schedule/Synchronize/Order unit (SSO)
|
|
- Loopback interface (LBK)
|
|
|
|
RVU managed non-networking functional blocks
|
|
- Crypto accelerator (CPT)
|
|
- Scheduled timers unit (TIM)
|
|
- Schedule/Synchronize/Order unit (SSO)
|
|
Used for both networking and non networking usecases
|
|
|
|
Resource provisioning examples
|
|
- A PF/VF with NIX-LF & NPA-LF resources works as a pure network device
|
|
- A PF/VF with CPT-LF resource works as a pure crypto offload device.
|
|
|
|
RVU functional blocks are highly configurable as per software requirements.
|
|
|
|
Firmware setups following stuff before kernel boots
|
|
- Enables required number of RVU PFs based on number of physical links.
|
|
- Number of VFs per PF are either static or configurable at compile time.
|
|
Based on config, firmware assigns VFs to each of the PFs.
|
|
- Also assigns MSIX vectors to each of PF and VFs.
|
|
- These are not changed after kernel boot.
|
|
|
|
Drivers
|
|
=======
|
|
|
|
Linux kernel will have multiple drivers registering to different PF and VFs
|
|
of RVU. Wrt networking there will be 3 flavours of drivers.
|
|
|
|
Admin Function driver
|
|
---------------------
|
|
|
|
As mentioned above RVU PF0 is called the admin function (AF), this driver
|
|
supports resource provisioning and configuration of functional blocks.
|
|
Doesn't handle any I/O. It sets up few basic stuff but most of the
|
|
funcionality is achieved via configuration requests from PFs and VFs.
|
|
|
|
PF/VFs communicates with AF via a shared memory region (mailbox). Upon
|
|
receiving requests AF does resource provisioning and other HW configuration.
|
|
AF is always attached to host kernel, but PFs and their VFs may be used by host
|
|
kernel itself, or attached to VMs or to userspace applications like
|
|
DPDK etc. So AF has to handle provisioning/configuration requests sent
|
|
by any device from any domain.
|
|
|
|
AF driver also interacts with underlying firmware to
|
|
- Manage physical ethernet links ie CGX LMACs.
|
|
- Retrieve information like speed, duplex, autoneg etc
|
|
- Retrieve PHY EEPROM and stats.
|
|
- Configure FEC, PAM modes
|
|
- etc
|
|
|
|
From pure networking side AF driver supports following functionality.
|
|
- Map a physical link to a RVU PF to which a netdev is registered.
|
|
- Attach NIX and NPA block LFs to RVU PF/VF which provide buffer pools, RQs, SQs
|
|
for regular networking functionality.
|
|
- Flow control (pause frames) enable/disable/config.
|
|
- HW PTP timestamping related config.
|
|
- NPC parser profile config, basically how to parse pkt and what info to extract.
|
|
- NPC extract profile config, what to extract from the pkt to match data in MCAM entries.
|
|
- Manage NPC MCAM entries, upon request can frame and install requested packet forwarding rules.
|
|
- Defines receive side scaling (RSS) algorithms.
|
|
- Defines segmentation offload algorithms (eg TSO)
|
|
- VLAN stripping, capture and insertion config.
|
|
- SSO and TIM blocks config which provide packet scheduling support.
|
|
- Debugfs support, to check current resource provising, current status of
|
|
NPA pools, NIX RQ, SQ and CQs, various stats etc which helps in debugging issues.
|
|
- And many more.
|
|
|
|
Physical Function driver
|
|
------------------------
|
|
|
|
This RVU PF handles IO, is mapped to a physical ethernet link and this
|
|
driver registers a netdev. This supports SR-IOV. As said above this driver
|
|
communicates with AF with a mailbox. To retrieve information from physical
|
|
links this driver talks to AF and AF gets that info from firmware and responds
|
|
back ie cannot talk to firmware directly.
|
|
|
|
Supports ethtool for configuring links, RSS, queue count, queue size,
|
|
flow control, ntuple filters, dump PHY EEPROM, config FEC etc.
|
|
|
|
Virtual Function driver
|
|
-----------------------
|
|
|
|
There are two types VFs, VFs that share the physical link with their parent
|
|
SR-IOV PF and the VFs which work in pairs using internal HW loopback channels (LBK).
|
|
|
|
Type1:
|
|
- These VFs and their parent PF share a physical link and used for outside communication.
|
|
- VFs cannot communicate with AF directly, they send mbox message to PF and PF
|
|
forwards that to AF. AF after processing, responds back to PF and PF forwards
|
|
the reply to VF.
|
|
- From functionality point of view there is no difference between PF and VF as same type
|
|
HW resources are attached to both. But user would be able to configure few stuff only
|
|
from PF as PF is treated as owner/admin of the link.
|
|
|
|
Type2:
|
|
- RVU PF0 ie admin function creates these VFs and maps them to loopback block's channels.
|
|
- A set of two VFs (VF0 & VF1, VF2 & VF3 .. so on) works as a pair ie pkts sent out of
|
|
VF0 will be received by VF1 and viceversa.
|
|
- These VFs can be used by applications or virtual machines to communicate between them
|
|
without sending traffic outside. There is no switch present in HW, hence the support
|
|
for loopback VFs.
|
|
- These communicate directly with AF (PF0) via mbox.
|
|
|
|
Except for the IO channels or links used for packet reception and transmission there is
|
|
no other difference between these VF types. AF driver takes care of IO channel mapping,
|
|
hence same VF driver works for both types of devices.
|
|
|
|
Basic packet flow
|
|
=================
|
|
|
|
Ingress
|
|
-------
|
|
|
|
1. CGX LMAC receives packet.
|
|
2. Forwards the packet to the NIX block.
|
|
3. Then submitted to NPC block for parsing and then MCAM lookup to get the destination RVU device.
|
|
4. NIX LF attached to the destination RVU device allocates a buffer from RQ mapped buffer pool of NPA block LF.
|
|
5. RQ may be selected by RSS or by configuring MCAM rule with a RQ number.
|
|
6. Packet is DMA'ed and driver is notified.
|
|
|
|
Egress
|
|
------
|
|
|
|
1. Driver prepares a send descriptor and submits to SQ for transmission.
|
|
2. The SQ is already configured (by AF) to transmit on a specific link/channel.
|
|
3. The SQ descriptor ring is maintained in buffers allocated from SQ mapped pool of NPA block LF.
|
|
4. NIX block transmits the pkt on the designated channel.
|
|
5. NPC MCAM entries can be installed to divert pkt onto a different channel.
|
|
|
|
Devlink health reporters
|
|
========================
|
|
|
|
NPA Reporters
|
|
-------------
|
|
The NPA reporters are responsible for reporting and recovering the following group of errors:
|
|
|
|
1. GENERAL events
|
|
|
|
- Error due to operation of unmapped PF.
|
|
- Error due to disabled alloc/free for other HW blocks (NIX, SSO, TIM, DPI and AURA).
|
|
|
|
2. ERROR events
|
|
|
|
- Fault due to NPA_AQ_INST_S read or NPA_AQ_RES_S write.
|
|
- AQ Doorbell Error.
|
|
|
|
3. RAS events
|
|
|
|
- RAS Error Reporting for NPA_AQ_INST_S/NPA_AQ_RES_S.
|
|
|
|
4. RVU events
|
|
|
|
- Error due to unmapped slot.
|
|
|
|
Sample Output::
|
|
|
|
~# devlink health
|
|
pci/0002:01:00.0:
|
|
reporter hw_npa_intr
|
|
state healthy error 2872 recover 2872 last_dump_date 2020-12-10 last_dump_time 09:39:09 grace_period 0 auto_recover true auto_dump true
|
|
reporter hw_npa_gen
|
|
state healthy error 2872 recover 2872 last_dump_date 2020-12-11 last_dump_time 04:43:04 grace_period 0 auto_recover true auto_dump true
|
|
reporter hw_npa_err
|
|
state healthy error 2871 recover 2871 last_dump_date 2020-12-10 last_dump_time 09:39:17 grace_period 0 auto_recover true auto_dump true
|
|
reporter hw_npa_ras
|
|
state healthy error 0 recover 0 last_dump_date 2020-12-10 last_dump_time 09:32:40 grace_period 0 auto_recover true auto_dump true
|
|
|
|
Each reporter dumps the
|
|
|
|
- Error Type
|
|
- Error Register value
|
|
- Reason in words
|
|
|
|
For example::
|
|
|
|
~# devlink health dump show pci/0002:01:00.0 reporter hw_npa_gen
|
|
NPA_AF_GENERAL:
|
|
NPA General Interrupt Reg : 1
|
|
NIX0: free disabled RX
|
|
~# devlink health dump show pci/0002:01:00.0 reporter hw_npa_intr
|
|
NPA_AF_RVU:
|
|
NPA RVU Interrupt Reg : 1
|
|
Unmap Slot Error
|
|
~# devlink health dump show pci/0002:01:00.0 reporter hw_npa_err
|
|
NPA_AF_ERR:
|
|
NPA Error Interrupt Reg : 4096
|
|
AQ Doorbell Error
|
|
|
|
|
|
NIX Reporters
|
|
-------------
|
|
The NIX reporters are responsible for reporting and recovering the following group of errors:
|
|
|
|
1. GENERAL events
|
|
|
|
- Receive mirror/multicast packet drop due to insufficient buffer.
|
|
- SMQ Flush operation.
|
|
|
|
2. ERROR events
|
|
|
|
- Memory Fault due to WQE read/write from multicast/mirror buffer.
|
|
- Receive multicast/mirror replication list error.
|
|
- Receive packet on an unmapped PF.
|
|
- Fault due to NIX_AQ_INST_S read or NIX_AQ_RES_S write.
|
|
- AQ Doorbell Error.
|
|
|
|
3. RAS events
|
|
|
|
- RAS Error Reporting for NIX Receive Multicast/Mirror Entry Structure.
|
|
- RAS Error Reporting for WQE/Packet Data read from Multicast/Mirror Buffer..
|
|
- RAS Error Reporting for NIX_AQ_INST_S/NIX_AQ_RES_S.
|
|
|
|
4. RVU events
|
|
|
|
- Error due to unmapped slot.
|
|
|
|
Sample Output::
|
|
|
|
~# ./devlink health
|
|
pci/0002:01:00.0:
|
|
reporter hw_npa_intr
|
|
state healthy error 0 recover 0 grace_period 0 auto_recover true auto_dump true
|
|
reporter hw_npa_gen
|
|
state healthy error 0 recover 0 grace_period 0 auto_recover true auto_dump true
|
|
reporter hw_npa_err
|
|
state healthy error 0 recover 0 grace_period 0 auto_recover true auto_dump true
|
|
reporter hw_npa_ras
|
|
state healthy error 0 recover 0 grace_period 0 auto_recover true auto_dump true
|
|
reporter hw_nix_intr
|
|
state healthy error 1121 recover 1121 last_dump_date 2021-01-19 last_dump_time 05:42:26 grace_period 0 auto_recover true auto_dump true
|
|
reporter hw_nix_gen
|
|
state healthy error 949 recover 949 last_dump_date 2021-01-19 last_dump_time 05:42:43 grace_period 0 auto_recover true auto_dump true
|
|
reporter hw_nix_err
|
|
state healthy error 1147 recover 1147 last_dump_date 2021-01-19 last_dump_time 05:42:59 grace_period 0 auto_recover true auto_dump true
|
|
reporter hw_nix_ras
|
|
state healthy error 409 recover 409 last_dump_date 2021-01-19 last_dump_time 05:43:16 grace_period 0 auto_recover true auto_dump true
|
|
|
|
Each reporter dumps the
|
|
|
|
- Error Type
|
|
- Error Register value
|
|
- Reason in words
|
|
|
|
For example::
|
|
|
|
~# devlink health dump show pci/0002:01:00.0 reporter hw_nix_intr
|
|
NIX_AF_RVU:
|
|
NIX RVU Interrupt Reg : 1
|
|
Unmap Slot Error
|
|
~# devlink health dump show pci/0002:01:00.0 reporter hw_nix_gen
|
|
NIX_AF_GENERAL:
|
|
NIX General Interrupt Reg : 1
|
|
Rx multicast pkt drop
|
|
~# devlink health dump show pci/0002:01:00.0 reporter hw_nix_err
|
|
NIX_AF_ERR:
|
|
NIX Error Interrupt Reg : 64
|
|
Rx on unmapped PF_FUNC
|