392 lines
11 KiB
YAML
392 lines
11 KiB
YAML
# SPDX-License-Identifier: GPL-2.0
|
|
%YAML 1.2
|
|
---
|
|
$id: http://devicetree.org/schemas/usb/snps,dwc3.yaml#
|
|
$schema: http://devicetree.org/meta-schemas/core.yaml#
|
|
|
|
title: Synopsys DesignWare USB3 Controller
|
|
|
|
maintainers:
|
|
- Felipe Balbi <balbi@kernel.org>
|
|
|
|
description:
|
|
This is usually a subnode to DWC3 glue to which it is connected, but can also
|
|
be presented as a standalone DT node with an optional vendor-specific
|
|
compatible string.
|
|
|
|
allOf:
|
|
- $ref: usb-drd.yaml#
|
|
- if:
|
|
properties:
|
|
dr_mode:
|
|
const: peripheral
|
|
|
|
required:
|
|
- dr_mode
|
|
then:
|
|
$ref: usb.yaml#
|
|
else:
|
|
$ref: usb-xhci.yaml#
|
|
|
|
properties:
|
|
compatible:
|
|
contains:
|
|
oneOf:
|
|
- const: snps,dwc3
|
|
- const: synopsys,dwc3
|
|
deprecated: true
|
|
|
|
reg:
|
|
maxItems: 1
|
|
|
|
interrupts:
|
|
description:
|
|
It's either a single common DWC3 interrupt (dwc_usb3) or individual
|
|
interrupts for the host, gadget and DRD modes.
|
|
minItems: 1
|
|
maxItems: 3
|
|
|
|
interrupt-names:
|
|
minItems: 1
|
|
maxItems: 3
|
|
oneOf:
|
|
- const: dwc_usb3
|
|
- items:
|
|
enum: [host, peripheral, otg]
|
|
|
|
clocks:
|
|
description:
|
|
In general the core supports three types of clocks. bus_early is a
|
|
SoC Bus Clock (AHB/AXI/Native). ref generates ITP when the UTMI/ULPI
|
|
PHY is suspended. suspend clocks a small part of the USB3 core when
|
|
SS PHY in P3. But particular cases may differ from that having less
|
|
or more clock sources with another names.
|
|
|
|
clock-names:
|
|
contains:
|
|
anyOf:
|
|
- enum: [bus_early, ref, suspend]
|
|
- true
|
|
|
|
dma-coherent: true
|
|
|
|
iommus:
|
|
maxItems: 1
|
|
|
|
usb-phy:
|
|
minItems: 1
|
|
items:
|
|
- description: USB2/HS PHY
|
|
- description: USB3/SS PHY
|
|
|
|
phys:
|
|
minItems: 1
|
|
maxItems: 2
|
|
|
|
phy-names:
|
|
minItems: 1
|
|
maxItems: 2
|
|
items:
|
|
enum:
|
|
- usb2-phy
|
|
- usb3-phy
|
|
|
|
resets:
|
|
minItems: 1
|
|
|
|
snps,usb2-lpm-disable:
|
|
description: Indicate if we don't want to enable USB2 HW LPM for host
|
|
mode.
|
|
type: boolean
|
|
|
|
snps,usb3_lpm_capable:
|
|
description: Determines if platform is USB3 LPM capable
|
|
type: boolean
|
|
|
|
snps,usb2-gadget-lpm-disable:
|
|
description: Indicate if we don't want to enable USB2 HW LPM for gadget
|
|
mode.
|
|
type: boolean
|
|
|
|
snps,dis-start-transfer-quirk:
|
|
description:
|
|
When set, disable isoc START TRANSFER command failure SW work-around
|
|
for DWC_usb31 version 1.70a-ea06 and prior.
|
|
type: boolean
|
|
|
|
snps,disable_scramble_quirk:
|
|
description:
|
|
True when SW should disable data scrambling. Only really useful for FPGA
|
|
builds.
|
|
type: boolean
|
|
|
|
snps,has-lpm-erratum:
|
|
description: True when DWC3 was configured with LPM Erratum enabled
|
|
type: boolean
|
|
|
|
snps,lpm-nyet-threshold:
|
|
description: LPM NYET threshold
|
|
$ref: /schemas/types.yaml#/definitions/uint8
|
|
|
|
snps,u2exit_lfps_quirk:
|
|
description: Set if we want to enable u2exit lfps quirk
|
|
type: boolean
|
|
|
|
snps,u2ss_inp3_quirk:
|
|
description: Set if we enable P3 OK for U2/SS Inactive quirk
|
|
type: boolean
|
|
|
|
snps,req_p1p2p3_quirk:
|
|
description:
|
|
When set, the core will always request for P1/P2/P3 transition sequence.
|
|
type: boolean
|
|
|
|
snps,del_p1p2p3_quirk:
|
|
description:
|
|
When set core will delay P1/P2/P3 until a certain amount of 8B10B errors
|
|
occur.
|
|
type: boolean
|
|
|
|
snps,del_phy_power_chg_quirk:
|
|
description: When set core will delay PHY power change from P0 to P1/P2/P3.
|
|
type: boolean
|
|
|
|
snps,lfps_filter_quirk:
|
|
description: When set core will filter LFPS reception.
|
|
type: boolean
|
|
|
|
snps,rx_detect_poll_quirk:
|
|
description:
|
|
when set core will disable a 400us delay to start Polling LFPS after
|
|
RX.Detect.
|
|
type: boolean
|
|
|
|
snps,tx_de_emphasis_quirk:
|
|
description: When set core will set Tx de-emphasis value
|
|
type: boolean
|
|
|
|
snps,tx_de_emphasis:
|
|
description:
|
|
The value driven to the PHY is controlled by the LTSSM during USB3
|
|
Compliance mode.
|
|
$ref: /schemas/types.yaml#/definitions/uint8
|
|
enum:
|
|
- 0 # -6dB de-emphasis
|
|
- 1 # -3.5dB de-emphasis
|
|
- 2 # No de-emphasis
|
|
|
|
snps,dis_u3_susphy_quirk:
|
|
description: When set core will disable USB3 suspend phy
|
|
type: boolean
|
|
|
|
snps,dis_u2_susphy_quirk:
|
|
description: When set core will disable USB2 suspend phy
|
|
type: boolean
|
|
|
|
snps,dis_enblslpm_quirk:
|
|
description:
|
|
When set clears the enblslpm in GUSB2PHYCFG, disabling the suspend signal
|
|
to the PHY.
|
|
type: boolean
|
|
|
|
snps,dis-u1-entry-quirk:
|
|
description: Set if link entering into U1 needs to be disabled
|
|
type: boolean
|
|
|
|
snps,dis-u2-entry-quirk:
|
|
description: Set if link entering into U2 needs to be disabled
|
|
type: boolean
|
|
|
|
snps,dis_rxdet_inp3_quirk:
|
|
description:
|
|
When set core will disable receiver detection in PHY P3 power state.
|
|
type: boolean
|
|
|
|
snps,dis-u2-freeclk-exists-quirk:
|
|
description:
|
|
When set, clear the u2_freeclk_exists in GUSB2PHYCFG, specify that USB2
|
|
PHY doesn't provide a free-running PHY clock.
|
|
type: boolean
|
|
|
|
snps,dis-del-phy-power-chg-quirk:
|
|
description:
|
|
When set core will change PHY power from P0 to P1/P2/P3 without delay.
|
|
type: boolean
|
|
|
|
snps,dis-tx-ipgap-linecheck-quirk:
|
|
description: When set, disable u2mac linestate check during HS transmit
|
|
type: boolean
|
|
|
|
snps,parkmode-disable-ss-quirk:
|
|
description:
|
|
When set, all SuperSpeed bus instances in park mode are disabled.
|
|
type: boolean
|
|
|
|
snps,dis_metastability_quirk:
|
|
description:
|
|
When set, disable metastability workaround. CAUTION! Use only if you are
|
|
absolutely sure of it.
|
|
type: boolean
|
|
|
|
snps,dis-split-quirk:
|
|
description:
|
|
When set, change the way URBs are handled by the driver. Needed to
|
|
avoid -EPROTO errors with usbhid on some devices (Hikey 970).
|
|
type: boolean
|
|
|
|
snps,gfladj-refclk-lpm-sel-quirk:
|
|
description:
|
|
When set, run the SOF/ITP counter based on ref_clk.
|
|
type: boolean
|
|
|
|
snps,resume-hs-terminations:
|
|
description:
|
|
Fix the issue of HS terminations CRC error on resume by enabling this
|
|
quirk. When set, all the termsel, xcvrsel, opmode becomes 0 during end
|
|
of resume. This option is to support certain legacy ULPI PHYs.
|
|
type: boolean
|
|
|
|
snps,is-utmi-l1-suspend:
|
|
description:
|
|
True when DWC3 asserts output signal utmi_l1_suspend_n, false when
|
|
asserts utmi_sleep_n.
|
|
type: boolean
|
|
|
|
snps,hird-threshold:
|
|
description: HIRD threshold
|
|
$ref: /schemas/types.yaml#/definitions/uint8
|
|
|
|
snps,hsphy_interface:
|
|
description:
|
|
High-Speed PHY interface selection between UTMI+ and ULPI when the
|
|
DWC_USB3_HSPHY_INTERFACE has value 3.
|
|
$ref: /schemas/types.yaml#/definitions/string
|
|
enum: [utmi, ulpi]
|
|
|
|
snps,quirk-frame-length-adjustment:
|
|
description:
|
|
Value for GFLADJ_30MHZ field of GFLADJ register for post-silicon frame
|
|
length adjustment when the fladj_30mhz_sdbnd signal is invalid or
|
|
incorrect.
|
|
$ref: /schemas/types.yaml#/definitions/uint32
|
|
minimum: 0
|
|
maximum: 0x3f
|
|
|
|
snps,ref-clock-period-ns:
|
|
description:
|
|
Value for REFCLKPER field of GUCTL register for reference clock period in
|
|
nanoseconds, when the hardware set default does not match the actual
|
|
clock.
|
|
|
|
This binding is deprecated. Instead, provide an appropriate reference clock.
|
|
minimum: 8
|
|
maximum: 62
|
|
deprecated: true
|
|
|
|
snps,rx-thr-num-pkt-prd:
|
|
description:
|
|
Periodic ESS RX packet threshold count (host mode only). Set this and
|
|
snps,rx-max-burst-prd to a valid, non-zero value 1-16 (DWC_usb31
|
|
programming guide section 1.2.4) to enable periodic ESS RX threshold.
|
|
$ref: /schemas/types.yaml#/definitions/uint8
|
|
minimum: 1
|
|
maximum: 16
|
|
|
|
snps,rx-max-burst-prd:
|
|
description:
|
|
Max periodic ESS RX burst size (host mode only). Set this and
|
|
snps,rx-thr-num-pkt-prd to a valid, non-zero value 1-16 (DWC_usb31
|
|
programming guide section 1.2.4) to enable periodic ESS RX threshold.
|
|
$ref: /schemas/types.yaml#/definitions/uint8
|
|
minimum: 1
|
|
maximum: 16
|
|
|
|
snps,tx-thr-num-pkt-prd:
|
|
description:
|
|
Periodic ESS TX packet threshold count (host mode only). Set this and
|
|
snps,tx-max-burst-prd to a valid, non-zero value 1-16 (DWC_usb31
|
|
programming guide section 1.2.3) to enable periodic ESS TX threshold.
|
|
$ref: /schemas/types.yaml#/definitions/uint8
|
|
minimum: 1
|
|
maximum: 16
|
|
|
|
snps,tx-max-burst-prd:
|
|
description:
|
|
Max periodic ESS TX burst size (host mode only). Set this and
|
|
snps,tx-thr-num-pkt-prd to a valid, non-zero value 1-16 (DWC_usb31
|
|
programming guide section 1.2.3) to enable periodic ESS TX threshold.
|
|
$ref: /schemas/types.yaml#/definitions/uint8
|
|
minimum: 1
|
|
maximum: 16
|
|
|
|
tx-fifo-resize:
|
|
description: Determines if the TX fifos can be dynamically resized depending
|
|
on the number of IN endpoints used and if bursting is supported. This
|
|
may help improve bandwidth on platforms with higher system latencies, as
|
|
increased fifo space allows for the controller to prefetch data into its
|
|
internal memory.
|
|
type: boolean
|
|
|
|
tx-fifo-max-num:
|
|
description: Specifies the max number of packets the txfifo resizing logic
|
|
can account for when higher endpoint bursting is used. (bMaxBurst > 6) The
|
|
higher the number, the more fifo space the txfifo resizing logic will
|
|
allocate for that endpoint.
|
|
$ref: /schemas/types.yaml#/definitions/uint8
|
|
minimum: 3
|
|
|
|
snps,incr-burst-type-adjustment:
|
|
description:
|
|
Value for INCR burst type of GSBUSCFG0 register, undefined length INCR
|
|
burst type enable and INCRx type. A single value means INCRX burst mode
|
|
enabled. If more than one value specified, undefined length INCR burst
|
|
type will be enabled with burst lengths utilized up to the maximum
|
|
of the values passed in this property.
|
|
$ref: /schemas/types.yaml#/definitions/uint32-array
|
|
minItems: 1
|
|
maxItems: 8
|
|
uniqueItems: true
|
|
items:
|
|
enum: [1, 4, 8, 16, 32, 64, 128, 256]
|
|
|
|
port:
|
|
$ref: /schemas/graph.yaml#/properties/port
|
|
description:
|
|
This port is used with the 'usb-role-switch' property to connect the
|
|
dwc3 to type C connector.
|
|
|
|
wakeup-source:
|
|
$ref: /schemas/types.yaml#/definitions/flag
|
|
description:
|
|
Enable USB remote wakeup.
|
|
|
|
unevaluatedProperties: false
|
|
|
|
required:
|
|
- compatible
|
|
- reg
|
|
- interrupts
|
|
|
|
examples:
|
|
- |
|
|
usb@4a030000 {
|
|
compatible = "snps,dwc3";
|
|
reg = <0x4a030000 0xcfff>;
|
|
interrupts = <0 92 4>;
|
|
usb-phy = <&usb2_phy>, <&usb3_phy>;
|
|
snps,incr-burst-type-adjustment = <1>, <4>, <8>, <16>;
|
|
};
|
|
- |
|
|
usb@4a000000 {
|
|
compatible = "snps,dwc3";
|
|
reg = <0x4a000000 0xcfff>;
|
|
interrupts = <0 92 4>;
|
|
clocks = <&clk 1>, <&clk 2>, <&clk 3>;
|
|
clock-names = "bus_early", "ref", "suspend";
|
|
phys = <&usb2_phy>, <&usb3_phy>;
|
|
phy-names = "usb2-phy", "usb3-phy";
|
|
snps,dis_u2_susphy_quirk;
|
|
snps,dis_enblslpm_quirk;
|
|
};
|
|
...
|