124 lines
3.2 KiB
YAML
124 lines
3.2 KiB
YAML
# SPDX-License-Identifier: GPL-2.0
|
|
%YAML 1.2
|
|
---
|
|
$id: http://devicetree.org/schemas/timer/arm,arch_timer_mmio.yaml#
|
|
$schema: http://devicetree.org/meta-schemas/core.yaml#
|
|
|
|
title: ARM memory mapped architected timer
|
|
|
|
maintainers:
|
|
- Marc Zyngier <marc.zyngier@arm.com>
|
|
- Mark Rutland <mark.rutland@arm.com>
|
|
|
|
description: |+
|
|
ARM cores may have a memory mapped architected timer, which provides up to 8
|
|
frames with a physical and optional virtual timer per frame.
|
|
|
|
The memory mapped timer is attached to a GIC to deliver its interrupts via SPIs.
|
|
|
|
properties:
|
|
compatible:
|
|
items:
|
|
- enum:
|
|
- arm,armv7-timer-mem
|
|
|
|
reg:
|
|
maxItems: 1
|
|
description: The control frame base address
|
|
|
|
'#address-cells':
|
|
enum: [1, 2]
|
|
|
|
'#size-cells':
|
|
const: 1
|
|
|
|
ranges: true
|
|
|
|
clock-frequency:
|
|
description: The frequency of the main counter, in Hz. Should be present
|
|
only where necessary to work around broken firmware which does not configure
|
|
CNTFRQ on all CPUs to a uniform correct value. Use of this property is
|
|
strongly discouraged; fix your firmware unless absolutely impossible.
|
|
|
|
always-on:
|
|
type: boolean
|
|
description: If present, the timer is powered through an always-on power
|
|
domain, therefore it never loses context.
|
|
|
|
arm,cpu-registers-not-fw-configured:
|
|
type: boolean
|
|
description: Firmware does not initialize any of the generic timer CPU
|
|
registers, which contain their architecturally-defined reset values. Only
|
|
supported for 32-bit systems which follow the ARMv7 architected reset
|
|
values.
|
|
|
|
arm,no-tick-in-suspend:
|
|
type: boolean
|
|
description: The main counter does not tick when the system is in
|
|
low-power system suspend on some SoCs. This behavior does not match the
|
|
Architecture Reference Manual's specification that the system counter "must
|
|
be implemented in an always-on power domain."
|
|
|
|
patternProperties:
|
|
'^frame@[0-9a-z]*$':
|
|
type: object
|
|
additionalProperties: false
|
|
description: A timer node has up to 8 frame sub-nodes, each with the following properties.
|
|
properties:
|
|
frame-number:
|
|
$ref: "/schemas/types.yaml#/definitions/uint32"
|
|
minimum: 0
|
|
maximum: 7
|
|
|
|
interrupts:
|
|
minItems: 1
|
|
items:
|
|
- description: physical timer irq
|
|
- description: virtual timer irq
|
|
|
|
reg:
|
|
minItems: 1
|
|
items:
|
|
- description: 1st view base address
|
|
- description: 2nd optional view base address
|
|
|
|
required:
|
|
- frame-number
|
|
- interrupts
|
|
- reg
|
|
|
|
required:
|
|
- compatible
|
|
- reg
|
|
- '#address-cells'
|
|
- '#size-cells'
|
|
|
|
additionalProperties: false
|
|
|
|
examples:
|
|
- |
|
|
timer@f0000000 {
|
|
compatible = "arm,armv7-timer-mem";
|
|
#address-cells = <1>;
|
|
#size-cells = <1>;
|
|
ranges = <0 0xf0001000 0x1000>;
|
|
reg = <0xf0000000 0x1000>;
|
|
clock-frequency = <50000000>;
|
|
|
|
frame@0 {
|
|
frame-number = <0>;
|
|
interrupts = <0 13 0x8>,
|
|
<0 14 0x8>;
|
|
reg = <0x0000 0x1000>,
|
|
<0x1000 0x1000>;
|
|
};
|
|
|
|
frame@2000 {
|
|
frame-number = <1>;
|
|
interrupts = <0 15 0x8>;
|
|
reg = <0x2000 0x1000>;
|
|
};
|
|
};
|
|
|
|
...
|