89 lines
2.3 KiB
YAML
89 lines
2.3 KiB
YAML
# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
|
|
%YAML 1.2
|
|
---
|
|
$id: http://devicetree.org/schemas/spi/mediatek,spi-mtk-snfi.yaml#
|
|
$schema: http://devicetree.org/meta-schemas/core.yaml#
|
|
|
|
title: SPI-NAND flash controller for MediaTek ARM SoCs
|
|
|
|
maintainers:
|
|
- Chuanhong Guo <gch981213@gmail.com>
|
|
|
|
description: |
|
|
The Mediatek SPI-NAND flash controller is an extended version of
|
|
the Mediatek NAND flash controller. It can perform standard SPI
|
|
instructions with one continuous write and one read for up-to 0xa0
|
|
bytes. It also supports typical SPI-NAND page cache operations
|
|
in single, dual or quad IO mode with pipelined ECC encoding/decoding
|
|
using the accompanying ECC engine. There should be only one spi
|
|
slave device following generic spi bindings.
|
|
|
|
allOf:
|
|
- $ref: /schemas/spi/spi-controller.yaml#
|
|
|
|
properties:
|
|
compatible:
|
|
enum:
|
|
- mediatek,mt7622-snand
|
|
- mediatek,mt7629-snand
|
|
|
|
reg:
|
|
items:
|
|
- description: core registers
|
|
|
|
interrupts:
|
|
items:
|
|
- description: NFI interrupt
|
|
|
|
clocks:
|
|
items:
|
|
- description: clock used for the controller
|
|
- description: clock used for the SPI bus
|
|
|
|
clock-names:
|
|
items:
|
|
- const: nfi_clk
|
|
- const: pad_clk
|
|
|
|
nand-ecc-engine:
|
|
description: device-tree node of the accompanying ECC engine.
|
|
$ref: /schemas/types.yaml#/definitions/phandle
|
|
|
|
required:
|
|
- compatible
|
|
- reg
|
|
- interrupts
|
|
- clocks
|
|
- clock-names
|
|
- nand-ecc-engine
|
|
|
|
unevaluatedProperties: false
|
|
|
|
examples:
|
|
- |
|
|
#include <dt-bindings/interrupt-controller/irq.h>
|
|
#include <dt-bindings/interrupt-controller/arm-gic.h>
|
|
#include <dt-bindings/clock/mt7622-clk.h>
|
|
soc {
|
|
#address-cells = <2>;
|
|
#size-cells = <2>;
|
|
snfi: spi@1100d000 {
|
|
compatible = "mediatek,mt7622-snand";
|
|
reg = <0 0x1100d000 0 0x1000>;
|
|
interrupts = <GIC_SPI 96 IRQ_TYPE_LEVEL_LOW>;
|
|
clocks = <&pericfg CLK_PERI_NFI_PD>, <&pericfg CLK_PERI_SNFI_PD>;
|
|
clock-names = "nfi_clk", "pad_clk";
|
|
nand-ecc-engine = <&bch>;
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
|
|
flash@0 {
|
|
compatible = "spi-nand";
|
|
reg = <0>;
|
|
spi-tx-bus-width = <4>;
|
|
spi-rx-bus-width = <4>;
|
|
nand-ecc-engine = <&snfi>;
|
|
};
|
|
};
|
|
};
|