78 lines
2.4 KiB
Plaintext
78 lines
2.4 KiB
Plaintext
Texas Instruments - tlv320aic31xx Codec module
|
|
|
|
The tlv320aic31xx serial control bus communicates through I2C protocols
|
|
|
|
Required properties:
|
|
|
|
- compatible - "string" - One of:
|
|
"ti,tlv320aic310x" - Generic TLV320AIC31xx with mono speaker amp
|
|
"ti,tlv320aic311x" - Generic TLV320AIC31xx with stereo speaker amp
|
|
"ti,tlv320aic3100" - TLV320AIC3100 (mono speaker amp, no MiniDSP)
|
|
"ti,tlv320aic3110" - TLV320AIC3110 (stereo speaker amp, no MiniDSP)
|
|
"ti,tlv320aic3120" - TLV320AIC3120 (mono speaker amp, MiniDSP)
|
|
"ti,tlv320aic3111" - TLV320AIC3111 (stereo speaker amp, MiniDSP)
|
|
"ti,tlv320dac3100" - TLV320DAC3100 (no ADC, mono speaker amp, no MiniDSP)
|
|
"ti,tlv320dac3101" - TLV320DAC3101 (no ADC, stereo speaker amp, no MiniDSP)
|
|
|
|
- reg - <int> - I2C slave address
|
|
- HPVDD-supply, SPRVDD-supply, SPLVDD-supply, AVDD-supply, IOVDD-supply,
|
|
DVDD-supply : power supplies for the device as covered in
|
|
Documentation/devicetree/bindings/regulator/regulator.txt
|
|
|
|
|
|
Optional properties:
|
|
|
|
- reset-gpios - GPIO specification for the active low RESET input.
|
|
- ai31xx-micbias-vg - MicBias Voltage setting
|
|
1 or MICBIAS_2_0V - MICBIAS output is powered to 2.0V
|
|
2 or MICBIAS_2_5V - MICBIAS output is powered to 2.5V
|
|
3 or MICBIAS_AVDD - MICBIAS output is connected to AVDD
|
|
If this node is not mentioned or if the value is unknown, then
|
|
micbias is set to 2.0V.
|
|
- ai31xx-ocmv - output common-mode voltage setting
|
|
0 - 1.35V,
|
|
1 - 1.5V,
|
|
2 - 1.65V,
|
|
3 - 1.8V
|
|
|
|
Deprecated properties:
|
|
|
|
- gpio-reset - gpio pin number used for codec reset
|
|
|
|
CODEC output pins:
|
|
* HPL
|
|
* HPR
|
|
* SPL, devices with stereo speaker amp
|
|
* SPR, devices with stereo speaker amp
|
|
* SPK, devices with mono speaker amp
|
|
* MICBIAS
|
|
|
|
CODEC input pins:
|
|
* MIC1LP, devices with ADC
|
|
* MIC1RP, devices with ADC
|
|
* MIC1LM, devices with ADC
|
|
* AIN1, devices without ADC
|
|
* AIN2, devices without ADC
|
|
|
|
The pins can be used in referring sound node's audio-routing property.
|
|
|
|
Example:
|
|
#include <dt-bindings/gpio/gpio.h>
|
|
#include <dt-bindings/sound/tlv320aic31xx.h>
|
|
|
|
tlv320aic31xx: tlv320aic31xx@18 {
|
|
compatible = "ti,tlv320aic311x";
|
|
reg = <0x18>;
|
|
|
|
ai31xx-micbias-vg = <MICBIAS_OFF>;
|
|
|
|
reset-gpios = <&gpio1 17 GPIO_ACTIVE_LOW>;
|
|
|
|
HPVDD-supply = <®ulator>;
|
|
SPRVDD-supply = <®ulator>;
|
|
SPLVDD-supply = <®ulator>;
|
|
AVDD-supply = <®ulator>;
|
|
IOVDD-supply = <®ulator>;
|
|
DVDD-supply = <®ulator>;
|
|
};
|