133 lines
3.5 KiB
YAML
133 lines
3.5 KiB
YAML
# SPDX-License-Identifier: GPL-2.0 OR BSD-2-Clause
|
|
%YAML 1.2
|
|
---
|
|
$id: http://devicetree.org/schemas/soc/qcom/qcom,gsbi.yaml#
|
|
$schema: http://devicetree.org/meta-schemas/core.yaml#
|
|
|
|
title: Qualcomm General Serial Bus Interface (GSBI)
|
|
|
|
maintainers:
|
|
- Andy Gross <agross@kernel.org>
|
|
- Bjorn Andersson <bjorn.andersson@linaro.org>
|
|
- Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
|
|
|
|
description:
|
|
The GSBI controller is modeled as a node with zero or more child nodes, each
|
|
representing a serial sub-node device that is mux'd as part of the GSBI
|
|
configuration settings. The mode setting will govern the input/output mode
|
|
of the 4 GSBI IOs.
|
|
|
|
A GSBI controller node can contain 0 or more child nodes representing serial
|
|
devices. These serial devices can be a QCOM UART, I2C controller, spi
|
|
controller, or some combination of aforementioned devices.
|
|
|
|
properties:
|
|
compatible:
|
|
const: qcom,gsbi-v1.0.0
|
|
|
|
'#address-cells':
|
|
const: 1
|
|
|
|
cell-index:
|
|
$ref: /schemas/types.yaml#/definitions/uint32
|
|
description:
|
|
The GSBI index.
|
|
|
|
clocks:
|
|
maxItems: 1
|
|
|
|
clock-names:
|
|
const: iface
|
|
|
|
qcom,crci:
|
|
$ref: /schemas/types.yaml#/definitions/uint32
|
|
description:
|
|
CRCI MUX value for QUP CRCI ports. Please reference
|
|
include/dt-bindings/soc/qcom,gsbi.h for valid CRCI mux values.
|
|
|
|
qcom,mode:
|
|
$ref: /schemas/types.yaml#/definitions/uint32
|
|
description:
|
|
MUX value for configuration of the serial interface. Please reference
|
|
include/dt-bindings/soc/qcom,gsbi.h for valid mux values.
|
|
|
|
'#size-cells':
|
|
const: 1
|
|
|
|
syscon-tcsr:
|
|
$ref: /schemas/types.yaml#/definitions/phandle
|
|
description:
|
|
Phandle of TCSR syscon node.Required if child uses dma.
|
|
|
|
ranges: true
|
|
|
|
reg:
|
|
maxItems: 1
|
|
|
|
patternProperties:
|
|
"spi@[0-9a-f]+$":
|
|
type: object
|
|
$ref: /schemas/spi/qcom,spi-qup.yaml#
|
|
|
|
"i2c@[0-9a-f]+$":
|
|
type: object
|
|
$ref: /schemas/i2c/qcom,i2c-qup.yaml#
|
|
|
|
"serial@[0-9a-f]+$":
|
|
type: object
|
|
$ref: /schemas/serial/qcom,msm-uartdm.yaml#
|
|
|
|
required:
|
|
- compatible
|
|
- cell-index
|
|
- clocks
|
|
- clock-names
|
|
- qcom,mode
|
|
- reg
|
|
|
|
additionalProperties: false
|
|
|
|
examples:
|
|
- |
|
|
#include <dt-bindings/clock/qcom,gcc-msm8960.h>
|
|
#include <dt-bindings/interrupt-controller/arm-gic.h>
|
|
#include <dt-bindings/soc/qcom,gsbi.h>
|
|
|
|
gsbi@12440000 {
|
|
compatible = "qcom,gsbi-v1.0.0";
|
|
reg = <0x12440000 0x100>;
|
|
cell-index = <1>;
|
|
clocks = <&gcc GSBI1_H_CLK>;
|
|
clock-names = "iface";
|
|
#address-cells = <1>;
|
|
#size-cells = <1>;
|
|
ranges;
|
|
|
|
syscon-tcsr = <&tcsr>;
|
|
qcom,mode = <GSBI_PROT_I2C_UART>;
|
|
|
|
serial@12450000 {
|
|
compatible = "qcom,msm-uartdm-v1.3", "qcom,msm-uartdm";
|
|
reg = <0x12450000 0x100>,
|
|
<0x12400000 0x03>;
|
|
interrupts = <0 193 IRQ_TYPE_LEVEL_HIGH>;
|
|
clocks = <&gcc GSBI1_UART_CLK>, <&gcc GSBI1_H_CLK>;
|
|
clock-names = "core", "iface";
|
|
};
|
|
|
|
i2c@12460000 {
|
|
compatible = "qcom,i2c-qup-v1.1.1";
|
|
reg = <0x12460000 0x1000>;
|
|
pinctrl-0 = <&i2c1_pins>;
|
|
pinctrl-1 = <&i2c1_pins_sleep>;
|
|
pinctrl-names = "default", "sleep";
|
|
interrupts = <0 194 IRQ_TYPE_LEVEL_HIGH>;
|
|
clocks = <&gcc GSBI1_QUP_CLK>, <&gcc GSBI1_H_CLK>;
|
|
clock-names = "core", "iface";
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
|
|
status = "disabled"; /* UART chosen */
|
|
};
|
|
};
|