97 lines
2.8 KiB
YAML
97 lines
2.8 KiB
YAML
# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
|
|
%YAML 1.2
|
|
---
|
|
$id: http://devicetree.org/schemas/power/supply/mediatek,mt6370-charger.yaml#
|
|
$schema: http://devicetree.org/meta-schemas/core.yaml#
|
|
|
|
title: MediaTek MT6370 Battery Charger
|
|
|
|
maintainers:
|
|
- ChiaEn Wu <chiaen_wu@richtek.com>
|
|
|
|
description: |
|
|
This module is part of the MT6370 MFD device.
|
|
Provides Battery Charger, Boost for OTG devices and BC1.2 detection.
|
|
|
|
properties:
|
|
compatible:
|
|
const: mediatek,mt6370-charger
|
|
|
|
interrupts:
|
|
description: |
|
|
Specify what irqs are needed to be handled by MT6370 Charger driver.
|
|
We need to use the IRQ "MT6370_IRQ_OVPCTRL_UVP_D" to know when USB
|
|
is plugged in, and then the driver will enable BC1.2 detection.
|
|
After the hardware of MT6370 completes the BC1.2 detection,
|
|
IRQ "MT6370_IRQ_ATTACH" will be triggered, and the driver will know
|
|
the result of BC1.2 detection.
|
|
When the IRQ "MT6370_IRQ_CHG_MIVR" is triggered, it means that the
|
|
hardware enters the "Minimum Input Voltage Regulation loop" and
|
|
a workaround needs to be applied at this time.
|
|
In summary, "MT6370_IRQ_OVPCTRL_UVP_D", "MT6370_IRQ_ATTACH" and
|
|
"MT6370_IRQ_CHG_MIVR" are required in this charger driver.
|
|
items:
|
|
- description: irq of "USB is plugged in"
|
|
- description: irq of "BC1.2 is done"
|
|
- description: irq of "Minimum Input Voltage Regulation loop is active"
|
|
|
|
interrupt-names:
|
|
items:
|
|
- const: uvp_d_evt
|
|
- const: attach_i
|
|
- const: mivr
|
|
|
|
io-channels:
|
|
description: |
|
|
Use ADC channel to read VBUS, IBUS, IBAT, etc., info.
|
|
minItems: 1
|
|
items:
|
|
- description: |
|
|
VBUS voltage with lower accuracy (+-75mV) but higher measure
|
|
range (1~22V)
|
|
- description: |
|
|
VBUS voltage with higher accuracy (+-30mV) but lower measure
|
|
range (1~9.76V)
|
|
- description: the main system input voltage
|
|
- description: battery voltage
|
|
- description: battery temperature-sense input voltage
|
|
- description: IBUS current (required)
|
|
- description: battery current
|
|
- description: |
|
|
regulated output voltage to supply for the PWM low-side gate driver
|
|
and the bootstrap capacitor
|
|
- description: IC junction temperature
|
|
|
|
io-channel-names:
|
|
minItems: 1
|
|
items:
|
|
- const: vbusdiv5
|
|
- const: vbusdiv2
|
|
- const: vsys
|
|
- const: vbat
|
|
- const: ts_bat
|
|
- const: ibus
|
|
- const: ibat
|
|
- const: chg_vddp
|
|
- const: temp_jc
|
|
|
|
usb-otg-vbus-regulator:
|
|
type: object
|
|
description: OTG boost regulator.
|
|
unevaluatedProperties: false
|
|
$ref: /schemas/regulator/regulator.yaml#
|
|
|
|
properties:
|
|
enable-gpios:
|
|
maxItems: 1
|
|
|
|
required:
|
|
- compatible
|
|
- interrupts
|
|
- interrupt-names
|
|
- io-channels
|
|
|
|
additionalProperties: false
|
|
|
|
...
|