92 lines
2.3 KiB
YAML
92 lines
2.3 KiB
YAML
# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
|
|
# Copyright (C) 2020 Texas Instruments Incorporated
|
|
%YAML 1.2
|
|
---
|
|
$id: http://devicetree.org/schemas/power/supply/bq2515x.yaml#
|
|
$schema: http://devicetree.org/meta-schemas/core.yaml#
|
|
|
|
title: TI bq2515x 500-mA Linear charger family
|
|
|
|
maintainers:
|
|
- Andrew Davis <afd@ti.com>
|
|
|
|
description: |
|
|
The BQ2515x family is a highly integrated battery charge management IC that
|
|
integrates the most common functions for wearable devices, namely a charger,
|
|
an output voltage rail, ADC for battery and system monitoring, and
|
|
push-button controller.
|
|
|
|
Specifications about the charger can be found at:
|
|
http://www.ti.com/lit/ds/symlink/bq25150.pdf
|
|
http://www.ti.com/lit/ds/symlink/bq25155.pdf
|
|
|
|
properties:
|
|
compatible:
|
|
enum:
|
|
- ti,bq25150
|
|
- ti,bq25155
|
|
|
|
reg:
|
|
maxItems: 1
|
|
description: I2C address of the charger.
|
|
|
|
ac-detect-gpios:
|
|
description: |
|
|
GPIO used for connecting the bq2515x device PG (AC Detect)
|
|
pin.
|
|
maxItems: 1
|
|
|
|
reset-gpios:
|
|
description: GPIO used for hardware reset.
|
|
maxItems: 1
|
|
|
|
powerdown-gpios:
|
|
description: GPIO used for low power mode of IC.
|
|
maxItems: 1
|
|
|
|
charge-enable-gpios:
|
|
description: GPIO used to turn on and off charging.
|
|
maxItems: 1
|
|
|
|
input-current-limit-microamp:
|
|
description: Maximum input current in micro Amps.
|
|
minimum: 50000
|
|
maximum: 500000
|
|
|
|
monitored-battery:
|
|
$ref: /schemas/types.yaml#/definitions/phandle
|
|
description: phandle to the battery node being monitored
|
|
|
|
required:
|
|
- compatible
|
|
- reg
|
|
- monitored-battery
|
|
|
|
additionalProperties: false
|
|
|
|
examples:
|
|
- |
|
|
bat: battery {
|
|
compatible = "simple-battery";
|
|
constant-charge-current-max-microamp = <50000>;
|
|
precharge-current-microamp = <2500>;
|
|
constant-charge-voltage-max-microvolt = <4000000>;
|
|
};
|
|
#include <dt-bindings/gpio/gpio.h>
|
|
i2c0 {
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
|
|
bq25150: charger@6b {
|
|
compatible = "ti,bq25150";
|
|
reg = <0x6b>;
|
|
monitored-battery = <&bat>;
|
|
input-current-limit-microamp = <100000>;
|
|
|
|
ac-detect-gpios = <&gpio1 28 GPIO_ACTIVE_HIGH>;
|
|
reset-gpios = <&gpio0 14 GPIO_ACTIVE_HIGH>;
|
|
powerdown-gpios = <&gpio0 15 GPIO_ACTIVE_HIGH>;
|
|
charge-enable-gpios = <&gpio0 13 GPIO_ACTIVE_LOW>;
|
|
};
|
|
};
|