277 lines
8.6 KiB
YAML
277 lines
8.6 KiB
YAML
# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
|
|
%YAML 1.2
|
|
---
|
|
$id: http://devicetree.org/schemas/pinctrl/pinctrl-mt8186.yaml#
|
|
$schema: http://devicetree.org/meta-schemas/core.yaml#
|
|
|
|
title: Mediatek MT8186 Pin Controller
|
|
|
|
maintainers:
|
|
- Sean Wang <sean.wang@mediatek.com>
|
|
|
|
description: |
|
|
The Mediatek's Pin controller is used to control SoC pins.
|
|
|
|
properties:
|
|
compatible:
|
|
const: mediatek,mt8186-pinctrl
|
|
|
|
gpio-controller: true
|
|
|
|
'#gpio-cells':
|
|
description: |
|
|
Number of cells in GPIO specifier. Since the generic GPIO binding is used,
|
|
the amount of cells must be specified as 2. See the below
|
|
mentioned gpio binding representation for description of particular cells.
|
|
const: 2
|
|
|
|
gpio-ranges:
|
|
maxItems: 1
|
|
|
|
gpio-line-names: true
|
|
|
|
reg:
|
|
description: |
|
|
Physical address base for gpio base registers. There are 8 different GPIO
|
|
physical address base in mt8186.
|
|
maxItems: 8
|
|
|
|
reg-names:
|
|
description: |
|
|
Gpio base register names.
|
|
items:
|
|
- const: iocfg0
|
|
- const: iocfg_lt
|
|
- const: iocfg_lm
|
|
- const: iocfg_lb
|
|
- const: iocfg_bl
|
|
- const: iocfg_rb
|
|
- const: iocfg_rt
|
|
- const: eint
|
|
|
|
interrupt-controller: true
|
|
|
|
'#interrupt-cells':
|
|
const: 2
|
|
|
|
interrupts:
|
|
description: The interrupt outputs to sysirq
|
|
maxItems: 1
|
|
|
|
mediatek,rsel-resistance-in-si-unit:
|
|
type: boolean
|
|
description: |
|
|
Identifying i2c pins pull up/down type which is RSEL. It can support
|
|
RSEL define or si unit value(ohm) to set different resistance.
|
|
|
|
# PIN CONFIGURATION NODES
|
|
patternProperties:
|
|
'-pins$':
|
|
type: object
|
|
additionalProperties: false
|
|
patternProperties:
|
|
'^pins':
|
|
type: object
|
|
additionalProperties: false
|
|
description: |
|
|
A pinctrl node should contain at least one subnodes representing the
|
|
pinctrl groups available on the machine. Each subnode will list the
|
|
pins it needs, and how they should be configured, with regard to muxer
|
|
configuration, pullups, drive strength, input enable/disable and
|
|
input schmitt.
|
|
An example of using macro:
|
|
pincontroller {
|
|
/* GPIO0 set as multifunction GPIO0 */
|
|
gpio-pins {
|
|
pins {
|
|
pinmux = <PINMUX_GPIO0__FUNC_GPIO0>;
|
|
}
|
|
};
|
|
/* GPIO128 set as multifunction SDA0 */
|
|
i2c0-pins {
|
|
pins {
|
|
pinmux = <PINMUX_GPIO128__FUNC_SDA0>;
|
|
}
|
|
};
|
|
};
|
|
$ref: "pinmux-node.yaml"
|
|
|
|
properties:
|
|
pinmux:
|
|
description: |
|
|
Integer array, represents gpio pin number and mux setting.
|
|
Supported pin number and mux varies for different SoCs, and are
|
|
defined as macros in dt-bindings/pinctrl/<soc>-pinfunc.h
|
|
directly.
|
|
|
|
drive-strength:
|
|
enum: [2, 4, 6, 8, 10, 12, 14, 16]
|
|
|
|
drive-strength-microamp:
|
|
enum: [125, 250, 500, 1000]
|
|
|
|
bias-pull-down:
|
|
oneOf:
|
|
- type: boolean
|
|
- enum: [100, 101, 102, 103]
|
|
description: mt8186 pull down PUPD/R0/R1 type define value.
|
|
- enum: [200, 201, 202, 203]
|
|
description: mt8186 pull down RSEL type define value.
|
|
- enum: [75000, 5000]
|
|
description: mt8186 pull down RSEL type si unit value(ohm).
|
|
description: |
|
|
For pull down type is normal, it don't need add RSEL & R1R0 define
|
|
and resistance value.
|
|
For pull down type is PUPD/R0/R1 type, it can add R1R0 define to
|
|
set different resistance. It can support "MTK_PUPD_SET_R1R0_00" &
|
|
"MTK_PUPD_SET_R1R0_01" & "MTK_PUPD_SET_R1R0_10" &
|
|
"MTK_PUPD_SET_R1R0_11" define in mt8186.
|
|
For pull down type is RSEL, it can add RSEL define & resistance
|
|
value(ohm) to set different resistance by identifying property
|
|
"mediatek,rsel-resistance-in-si-unit".
|
|
It can support "MTK_PULL_SET_RSEL_000" & "MTK_PULL_SET_RSEL_001"
|
|
& "MTK_PULL_SET_RSEL_010" & "MTK_PULL_SET_RSEL_011"
|
|
define in mt8186. It can also support resistance value(ohm)
|
|
"75000" & "5000" in mt8186.
|
|
An example of using RSEL define:
|
|
pincontroller {
|
|
i2c0_pin {
|
|
pins {
|
|
pinmux = <PINMUX_GPIO128__FUNC_SDA0>;
|
|
bias-pull-down = <MTK_PULL_SET_RSEL_001>;
|
|
}
|
|
};
|
|
};
|
|
An example of using si unit resistance value(ohm):
|
|
&pio {
|
|
mediatek,rsel-resistance-in-si-unit;
|
|
}
|
|
pincontroller {
|
|
i2c0_pin {
|
|
pins {
|
|
pinmux = <PINMUX_GPIO128__FUNC_SDA0>;
|
|
bias-pull-down = <75000>;
|
|
}
|
|
};
|
|
};
|
|
|
|
bias-pull-up:
|
|
oneOf:
|
|
- type: boolean
|
|
- enum: [100, 101, 102, 103]
|
|
description: mt8186 pull up PUPD/R0/R1 type define value.
|
|
- enum: [200, 201, 202, 203]
|
|
description: mt8186 pull up RSEL type define value.
|
|
- enum: [1000, 5000, 10000, 75000]
|
|
description: mt8186 pull up RSEL type si unit value(ohm).
|
|
description: |
|
|
For pull up type is normal, it don't need add RSEL & R1R0 define
|
|
and resistance value.
|
|
For pull up type is PUPD/R0/R1 type, it can add R1R0 define to
|
|
set different resistance. It can support "MTK_PUPD_SET_R1R0_00" &
|
|
"MTK_PUPD_SET_R1R0_01" & "MTK_PUPD_SET_R1R0_10" &
|
|
"MTK_PUPD_SET_R1R0_11" define in mt8186.
|
|
For pull up type is RSEL, it can add RSEL define & resistance
|
|
value(ohm) to set different resistance by identifying property
|
|
"mediatek,rsel-resistance-in-si-unit".
|
|
It can support "MTK_PULL_SET_RSEL_000" & "MTK_PULL_SET_RSEL_001"
|
|
& "MTK_PULL_SET_RSEL_010" & "MTK_PULL_SET_RSEL_011"
|
|
define in mt8186. It can also support resistance value(ohm)
|
|
"1000" & "5000" & "10000" & "75000" in mt8186.
|
|
An example of using si unit resistance value(ohm):
|
|
&pio {
|
|
mediatek,rsel-resistance-in-si-unit;
|
|
}
|
|
pincontroller {
|
|
i2c0-pins {
|
|
pins {
|
|
pinmux = <PINMUX_GPIO128__FUNC_SDA0>;
|
|
bias-pull-up = <1000>;
|
|
}
|
|
};
|
|
};
|
|
|
|
bias-disable: true
|
|
|
|
output-high: true
|
|
|
|
output-low: true
|
|
|
|
input-enable: true
|
|
|
|
input-disable: true
|
|
|
|
input-schmitt-enable: true
|
|
|
|
input-schmitt-disable: true
|
|
|
|
required:
|
|
- pinmux
|
|
|
|
required:
|
|
- compatible
|
|
- reg
|
|
- interrupts
|
|
- interrupt-controller
|
|
- '#interrupt-cells'
|
|
- gpio-controller
|
|
- '#gpio-cells'
|
|
- gpio-ranges
|
|
|
|
additionalProperties: false
|
|
|
|
examples:
|
|
- |
|
|
#include <dt-bindings/pinctrl/mt8186-pinfunc.h>
|
|
#include <dt-bindings/interrupt-controller/arm-gic.h>
|
|
|
|
pio: pinctrl@10005000 {
|
|
compatible = "mediatek,mt8186-pinctrl";
|
|
reg = <0x10005000 0x1000>,
|
|
<0x10002000 0x0200>,
|
|
<0x10002200 0x0200>,
|
|
<0x10002400 0x0200>,
|
|
<0x10002600 0x0200>,
|
|
<0x10002A00 0x0200>,
|
|
<0x10002c00 0x0200>,
|
|
<0x1000b000 0x1000>;
|
|
reg-names = "iocfg0", "iocfg_lt", "iocfg_lm",
|
|
"iocfg_lb", "iocfg_bl", "iocfg_rb",
|
|
"iocfg_rt", "eint";
|
|
gpio-controller;
|
|
#gpio-cells = <2>;
|
|
gpio-ranges = <&pio 0 0 185>;
|
|
interrupt-controller;
|
|
interrupts = <GIC_SPI 186 IRQ_TYPE_LEVEL_HIGH 0>;
|
|
#interrupt-cells = <2>;
|
|
|
|
pio-pins {
|
|
pins {
|
|
pinmux = <PINMUX_GPIO0__FUNC_GPIO0>;
|
|
output-low;
|
|
};
|
|
};
|
|
|
|
spi0-pins {
|
|
pins-spi {
|
|
pinmux = <PINMUX_GPIO0__FUNC_SPI0_CLK_B>,
|
|
<PINMUX_GPIO1__FUNC_SPI0_CSB_B>,
|
|
<PINMUX_GPIO2__FUNC_SPI0_MO_B>;
|
|
bias-disable;
|
|
};
|
|
pins-spi-mi {
|
|
pinmux = <PINMUX_GPIO3__FUNC_SPI0_MI_B>;
|
|
bias-pull-down;
|
|
};
|
|
};
|
|
|
|
i2c0-pins {
|
|
pins {
|
|
pinmux = <PINMUX_GPIO127__FUNC_SCL0>,
|
|
<PINMUX_GPIO128__FUNC_SDA0>;
|
|
bias-pull-up = <MTK_PULL_SET_RSEL_001>;
|
|
drive-strength-microamp = <1000>;
|
|
};
|
|
};
|
|
};
|