187 lines
8.0 KiB
YAML
187 lines
8.0 KiB
YAML
# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
|
|
%YAML 1.2
|
|
---
|
|
$id: http://devicetree.org/schemas/pinctrl/cirrus,lochnagar.yaml#
|
|
$schema: http://devicetree.org/meta-schemas/core.yaml#
|
|
|
|
title: Cirrus Logic Lochnagar Audio Development Board
|
|
|
|
maintainers:
|
|
- patches@opensource.cirrus.com
|
|
|
|
description: |
|
|
Lochnagar is an evaluation and development board for Cirrus Logic
|
|
Smart CODEC and Amp devices. It allows the connection of most Cirrus
|
|
Logic devices on mini-cards, as well as allowing connection of various
|
|
application processor systems to provide a full evaluation platform.
|
|
Audio system topology, clocking and power can all be controlled through
|
|
the Lochnagar, allowing the device under test to be used in a variety of
|
|
possible use cases.
|
|
|
|
This binding document describes the binding for the pinctrl portion of
|
|
the driver.
|
|
|
|
Also see these documents for generic binding information:
|
|
[1] GPIO : ../gpio/gpio.txt
|
|
[2] Pinctrl: ../pinctrl/pinctrl-bindings.txt
|
|
|
|
And these for relevant defines:
|
|
[3] include/dt-bindings/pinctrl/lochnagar.h
|
|
|
|
This binding must be part of the Lochnagar MFD binding:
|
|
[4] ../mfd/cirrus,lochnagar.yaml
|
|
|
|
properties:
|
|
compatible:
|
|
enum:
|
|
- cirrus,lochnagar-pinctrl
|
|
|
|
gpio-controller: true
|
|
|
|
'#gpio-cells':
|
|
description:
|
|
The first cell is the pin number and the second cell is used
|
|
to specify optional parameters.
|
|
const: 2
|
|
|
|
gpio-ranges:
|
|
description:
|
|
Range of pins managed by the GPIO controller, see [1]. Both the
|
|
GPIO and Pinctrl base should be set to zero and the count to the
|
|
appropriate of the LOCHNAGARx_PIN_NUM_GPIOS define, see [3].
|
|
maxItems: 1
|
|
|
|
pin-settings:
|
|
type: object
|
|
patternProperties:
|
|
'-pins$':
|
|
description:
|
|
The pin configurations are defined as a child of the pinctrl
|
|
states node, see [2]. Each sub-node can have the following
|
|
properties.
|
|
type: object
|
|
allOf:
|
|
- $ref: pincfg-node.yaml#
|
|
- $ref: pinmux-node.yaml#
|
|
|
|
properties:
|
|
groups:
|
|
description:
|
|
A list of groups to select (either this or "pins" must be
|
|
specified), available groups.
|
|
enum: [ codec-aif1, codec-aif2, codec-aif3, dsp-aif1,
|
|
dsp-aif2, psia1, psia2, gf-aif1, gf-aif2, gf-aif3,
|
|
gf-aif4, spdif-aif, usb-aif1, usb-aif2, adat-aif,
|
|
soundcard-aif ]
|
|
|
|
pins:
|
|
description:
|
|
A list of pin names to select (either this or "groups" must
|
|
be specified), available pins.
|
|
enum: [ fpga-gpio1, fpga-gpio2, fpga-gpio3, fpga-gpio4,
|
|
fpga-gpio5, fpga-gpio6, codec-gpio1, codec-gpio2,
|
|
codec-gpio3, codec-gpio4, codec-gpio5, codec-gpio6,
|
|
codec-gpio7, codec-gpio8, dsp-gpio1, dsp-gpio2,
|
|
dsp-gpio3, dsp-gpio4, dsp-gpio5, dsp-gpio6,
|
|
gf-gpio2, gf-gpio3, gf-gpio7, codec-aif1-bclk,
|
|
codec-aif1-rxdat, codec-aif1-lrclk, codec-aif1-txdat,
|
|
codec-aif2-bclk, codec-aif2-rxdat, codec-aif2-lrclk,
|
|
codec-aif2-txdat, codec-aif3-bclk, codec-aif3-rxdat,
|
|
codec-aif3-lrclk, codec-aif3-txdat, dsp-aif1-bclk,
|
|
dsp-aif1-rxdat, dsp-aif1-lrclk, dsp-aif1-txdat,
|
|
dsp-aif2-bclk, dsp-aif2-rxdat, dsp-aif2-lrclk,
|
|
dsp-aif2-txdat, psia1-bclk, psia1-rxdat, psia1-lrclk,
|
|
psia1-txdat, psia2-bclk, psia2-rxdat, psia2-lrclk,
|
|
psia2-txdat, gf-aif3-bclk, gf-aif3-rxdat,
|
|
gf-aif3-lrclk, gf-aif3-txdat, gf-aif4-bclk,
|
|
gf-aif4-rxdat, gf-aif4-lrclk, gf-aif4-txdat,
|
|
gf-aif1-bclk, gf-aif1-rxdat, gf-aif1-lrclk,
|
|
gf-aif1-txdat, gf-aif2-bclk, gf-aif2-rxdat,
|
|
gf-aif2-lrclk, gf-aif2-txdat, dsp-uart1-rx,
|
|
dsp-uart1-tx, dsp-uart2-rx, dsp-uart2-tx,
|
|
gf-uart2-rx, gf-uart2-tx, usb-uart-rx, codec-pdmclk1,
|
|
codec-pdmdat1, codec-pdmclk2, codec-pdmdat2,
|
|
codec-dmicclk1, codec-dmicdat1, codec-dmicclk2,
|
|
codec-dmicdat2, codec-dmicclk3, codec-dmicdat3,
|
|
codec-dmicclk4, codec-dmicdat4, dsp-dmicclk1,
|
|
dsp-dmicdat1, dsp-dmicclk2, dsp-dmicdat2, i2c2-scl,
|
|
i2c2-sda, i2c3-scl, i2c3-sda, i2c4-scl, i2c4-sda,
|
|
dsp-standby, codec-mclk1, codec-mclk2, dsp-clkin,
|
|
psia1-mclk, psia2-mclk, gf-gpio1, gf-gpio5,
|
|
dsp-gpio20, led1, led2 ]
|
|
|
|
function:
|
|
description:
|
|
The mux function to select, available functions.
|
|
enum: [ aif, fpga-gpio1, fpga-gpio2, fpga-gpio3, fpga-gpio4,
|
|
fpga-gpio5, fpga-gpio6, codec-gpio1, codec-gpio2,
|
|
codec-gpio3, codec-gpio4, codec-gpio5, codec-gpio6,
|
|
codec-gpio7, codec-gpio8, dsp-gpio1, dsp-gpio2,
|
|
dsp-gpio3, dsp-gpio4, dsp-gpio5, dsp-gpio6,
|
|
gf-gpio2, gf-gpio3, gf-gpio7, gf-gpio1, gf-gpio5,
|
|
dsp-gpio20, codec-clkout, dsp-clkout, pmic-32k,
|
|
spdif-clkout, clk-12m288, clk-11m2986, clk-24m576,
|
|
clk-22m5792, xmos-mclk, gf-clkout1, gf-mclk1,
|
|
gf-mclk3, gf-mclk2, gf-clkout2, codec-mclk1,
|
|
codec-mclk2, dsp-clkin, psia1-mclk, psia2-mclk,
|
|
spdif-mclk, codec-irq, codec-reset, dsp-reset,
|
|
dsp-irq, dsp-standby, codec-pdmclk1, codec-pdmdat1,
|
|
codec-pdmclk2, codec-pdmdat2, codec-dmicclk1,
|
|
codec-dmicdat1, codec-dmicclk2, codec-dmicdat2,
|
|
codec-dmicclk3, codec-dmicdat3, codec-dmicclk4,
|
|
codec-dmicdat4, dsp-dmicclk1, dsp-dmicdat1,
|
|
dsp-dmicclk2, dsp-dmicdat2, dsp-uart1-rx,
|
|
dsp-uart1-tx, dsp-uart2-rx, dsp-uart2-tx,
|
|
gf-uart2-rx, gf-uart2-tx, usb-uart-rx, usb-uart-tx,
|
|
i2c2-scl, i2c2-sda, i2c3-scl, i2c3-sda, i2c4-scl,
|
|
i2c4-sda, spdif-aif, psia1, psia1-bclk, psia1-lrclk,
|
|
psia1-rxdat, psia1-txdat, psia2, psia2-bclk,
|
|
psia2-lrclk, psia2-rxdat, psia2-txdat, codec-aif1,
|
|
codec-aif1-bclk, codec-aif1-lrclk, codec-aif1-rxdat,
|
|
codec-aif1-txdat, codec-aif2, codec-aif2-bclk,
|
|
codec-aif2-lrclk, codec-aif2-rxdat, codec-aif2-txdat,
|
|
codec-aif3, codec-aif3-bclk, codec-aif3-lrclk,
|
|
codec-aif3-rxdat, codec-aif3-txdat, dsp-aif1,
|
|
dsp-aif1-bclk, dsp-aif1-lrclk, dsp-aif1-rxdat,
|
|
dsp-aif1-txdat, dsp-aif2, dsp-aif2-bclk,
|
|
dsp-aif2-lrclk, dsp-aif2-rxdat, dsp-aif2-txdat,
|
|
gf-aif3, gf-aif3-bclk, gf-aif3-lrclk, gf-aif3-rxdat,
|
|
gf-aif3-txdat, gf-aif4, gf-aif4-bclk, gf-aif4-lrclk,
|
|
gf-aif4-rxdat, gf-aif4-txdat, gf-aif1, gf-aif1-bclk,
|
|
gf-aif1-lrclk, gf-aif1-rxdat, gf-aif1-txdat, gf-aif2,
|
|
gf-aif2-bclk, gf-aif2-lrclk, gf-aif2-rxdat,
|
|
gf-aif2-txdat, usb-aif1, usb-aif2, adat-aif,
|
|
soundcard-aif ]
|
|
|
|
output-enable:
|
|
description:
|
|
Specifies that an AIF group will be used as a master
|
|
interface (either this or input-enable is required if a
|
|
group is being muxed to an AIF)
|
|
|
|
input-enable:
|
|
description:
|
|
Specifies that an AIF group will be used as a slave
|
|
interface (either this or output-enable is required if a
|
|
group is being muxed to an AIF)
|
|
|
|
additionalProperties: false
|
|
|
|
required:
|
|
- function
|
|
|
|
additionalProperties: false
|
|
|
|
allOf:
|
|
- $ref: "pinctrl.yaml#"
|
|
|
|
required:
|
|
- compatible
|
|
- gpio-controller
|
|
- '#gpio-cells'
|
|
- gpio-ranges
|
|
- pinctrl-0
|
|
- pinctrl-names
|
|
|
|
additionalProperties: false
|