105 lines
2.6 KiB
YAML
105 lines
2.6 KiB
YAML
# SPDX-License-Identifier: GPL-2.0
|
|
%YAML 1.2
|
|
---
|
|
$id: http://devicetree.org/schemas/pci/snps,dw-pcie.yaml#
|
|
$schema: http://devicetree.org/meta-schemas/core.yaml#
|
|
|
|
title: Synopsys DesignWare PCIe interface
|
|
|
|
maintainers:
|
|
- Jingoo Han <jingoohan1@gmail.com>
|
|
- Gustavo Pimentel <gustavo.pimentel@synopsys.com>
|
|
|
|
description: |
|
|
Synopsys DesignWare PCIe host controller
|
|
|
|
allOf:
|
|
- $ref: /schemas/pci/pci-bus.yaml#
|
|
|
|
properties:
|
|
compatible:
|
|
anyOf:
|
|
- {}
|
|
- const: snps,dw-pcie
|
|
|
|
reg:
|
|
description: |
|
|
It should contain Data Bus Interface (dbi) and config registers for all
|
|
versions.
|
|
For designware core version >= 4.80, it may contain ATU address space.
|
|
minItems: 2
|
|
maxItems: 5
|
|
|
|
reg-names:
|
|
minItems: 2
|
|
maxItems: 5
|
|
items:
|
|
enum: [ dbi, dbi2, config, atu, atu_dma, app, appl, elbi, mgmt, ctrl,
|
|
parf, cfg, link, ulreg, smu, mpu, apb, phy ]
|
|
|
|
num-lanes:
|
|
description: |
|
|
number of lanes to use (this property should be specified unless
|
|
the link is brought already up in firmware)
|
|
maximum: 16
|
|
|
|
reset-gpio:
|
|
description: GPIO pin number of PERST# signal
|
|
maxItems: 1
|
|
deprecated: true
|
|
|
|
reset-gpios:
|
|
description: GPIO controlled connection to PERST# signal
|
|
maxItems: 1
|
|
|
|
interrupts: true
|
|
|
|
interrupt-names: true
|
|
|
|
clocks: true
|
|
|
|
snps,enable-cdm-check:
|
|
type: boolean
|
|
description: |
|
|
This is a boolean property and if present enables
|
|
automatic checking of CDM (Configuration Dependent Module) registers
|
|
for data corruption. CDM registers include standard PCIe configuration
|
|
space registers, Port Logic registers, DMA and iATU (internal Address
|
|
Translation Unit) registers.
|
|
|
|
num-viewport:
|
|
$ref: /schemas/types.yaml#/definitions/uint32
|
|
maximum: 256
|
|
description: |
|
|
number of view ports configured in hardware. If a platform
|
|
does not specify it, the driver autodetects it.
|
|
deprecated: true
|
|
|
|
additionalProperties: true
|
|
|
|
required:
|
|
- reg
|
|
- reg-names
|
|
- compatible
|
|
|
|
examples:
|
|
- |
|
|
bus {
|
|
#address-cells = <1>;
|
|
#size-cells = <1>;
|
|
pcie@dfc00000 {
|
|
device_type = "pci";
|
|
compatible = "snps,dw-pcie";
|
|
reg = <0xdfc00000 0x0001000>, /* IP registers */
|
|
<0xd0000000 0x0002000>; /* Configuration space */
|
|
reg-names = "dbi", "config";
|
|
#address-cells = <3>;
|
|
#size-cells = <2>;
|
|
ranges = <0x81000000 0 0x00000000 0xde000000 0 0x00010000>,
|
|
<0x82000000 0 0xd0400000 0xd0400000 0 0x0d000000>;
|
|
interrupts = <25>, <24>;
|
|
#interrupt-cells = <1>;
|
|
num-lanes = <1>;
|
|
};
|
|
};
|