49 lines
1.3 KiB
Plaintext
49 lines
1.3 KiB
Plaintext
Properties for the MDIO bus multiplexer/glue of Amlogic G12a SoC family.
|
|
|
|
This is a special case of a MDIO bus multiplexer. It allows to choose between
|
|
the internal mdio bus leading to the embedded 10/100 PHY or the external
|
|
MDIO bus.
|
|
|
|
Required properties in addition to the generic multiplexer properties:
|
|
- compatible : amlogic,g12a-mdio-mux
|
|
- reg: physical address and length of the multiplexer/glue registers
|
|
- clocks: list of clock phandle, one for each entry clock-names.
|
|
- clock-names: should contain the following:
|
|
* "pclk" : peripheral clock.
|
|
* "clkin0" : platform crytal
|
|
* "clkin1" : SoC 50MHz MPLL
|
|
|
|
Example :
|
|
|
|
mdio_mux: mdio-multiplexer@4c000 {
|
|
compatible = "amlogic,g12a-mdio-mux";
|
|
reg = <0x0 0x4c000 0x0 0xa4>;
|
|
clocks = <&clkc CLKID_ETH_PHY>,
|
|
<&xtal>,
|
|
<&clkc CLKID_MPLL_5OM>;
|
|
clock-names = "pclk", "clkin0", "clkin1";
|
|
mdio-parent-bus = <&mdio0>;
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
|
|
ext_mdio: mdio@0 {
|
|
reg = <0>;
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
};
|
|
|
|
int_mdio: mdio@1 {
|
|
reg = <1>;
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
|
|
internal_ephy: ethernet-phy@8 {
|
|
compatible = "ethernet-phy-id0180.3301",
|
|
"ethernet-phy-ieee802.3-c22";
|
|
interrupts = <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>;
|
|
reg = <8>;
|
|
max-speed = <100>;
|
|
};
|
|
};
|
|
};
|