linuxdebug/Documentation/devicetree/bindings/mtd/partitions/partition.yaml

64 lines
2.1 KiB
YAML

# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
%YAML 1.2
---
$id: http://devicetree.org/schemas/mtd/partitions/partition.yaml#
$schema: http://devicetree.org/meta-schemas/core.yaml#
title: Partition
description: |
This binding describes a single flash partition. Each partition must have its
relative offset and size specified. Depending on partition function extra
properties can be used.
A partition may be dynamically allocated by a specific parser at runtime.
In this specific case, a specific suffix is required to the node name.
Everything after 'partition-' will be used as the partition name to compare
with the one dynamically allocated by the specific parser.
If the partition contains invalid char a label can be provided that will
be used instead of the node name to make the comparison.
This is used to assign an OF node to the dynamiccally allocated partition
so that subsystem like NVMEM can provide an OF node and declare NVMEM cells.
The OF node will be assigned only if the partition label declared match the
one assigned by the parser at runtime.
maintainers:
- Rafał Miłecki <rafal@milecki.pl>
properties:
reg:
description: partition's offset and size within the flash
maxItems: 1
label:
description: The label / name for this partition. If omitted, the label
is taken from the node name (excluding the unit address).
read-only:
description: This parameter, if present, is a hint that this partition
should only be mounted read-only. This is usually used for flash
partitions containing early-boot firmware images or data which should
not be clobbered.
type: boolean
lock:
description: Do not unlock the partition at initialization time (not
supported on all devices)
type: boolean
slc-mode:
description: This parameter, if present, allows one to emulate SLC mode
on a partition attached to an MLC NAND thus making this partition
immune to paired-pages corruptions
type: boolean
if:
not:
required: [ reg ]
then:
properties:
$nodename:
pattern: '^partition-.*$'
additionalProperties: true