61 lines
1.5 KiB
YAML
61 lines
1.5 KiB
YAML
# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
|
|
%YAML 1.2
|
|
---
|
|
$id: http://devicetree.org/schemas/iio/adc/qcom,spmi-iadc.yaml#
|
|
$schema: http://devicetree.org/meta-schemas/core.yaml#
|
|
|
|
title: Qualcomm's SPMI PMIC current ADC
|
|
|
|
maintainers:
|
|
- Jonathan Cameron <jic23@kernel.org>
|
|
|
|
description: |
|
|
QPNP PMIC current ADC (IADC) provides interface to clients to read current.
|
|
A 16 bit ADC is used for current measurements. IADC can measure the current
|
|
through an external resistor (channel 1) or internal (built-in) resistor
|
|
(channel 0). When using an external resistor it is to be described by
|
|
qcom,external-resistor-micro-ohms property.
|
|
|
|
properties:
|
|
compatible:
|
|
const: qcom,spmi-iadc
|
|
|
|
reg:
|
|
description: IADC base address and length in the SPMI PMIC register map
|
|
maxItems: 1
|
|
|
|
qcom,external-resistor-micro-ohms:
|
|
description:
|
|
Sensor resistor value. If not defined value of 10000 micro Ohms
|
|
will be used.
|
|
|
|
interrupts:
|
|
maxItems: 1
|
|
description:
|
|
End of conversion interrupt.
|
|
|
|
"#io-channel-cells":
|
|
const: 1
|
|
|
|
required:
|
|
- compatible
|
|
- reg
|
|
|
|
additionalProperties: false
|
|
|
|
examples:
|
|
- |
|
|
#include <dt-bindings/interrupt-controller/irq.h>
|
|
spmi_bus {
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
pmic_iadc: adc@3600 {
|
|
compatible = "qcom,spmi-iadc";
|
|
reg = <0x3600>;
|
|
interrupts = <0x0 0x36 0x0 IRQ_TYPE_EDGE_RISING>;
|
|
qcom,external-resistor-micro-ohms = <10000>;
|
|
#io-channel-cells = <1>;
|
|
};
|
|
};
|
|
...
|