147 lines
3.2 KiB
YAML
147 lines
3.2 KiB
YAML
# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
|
|
%YAML 1.2
|
|
---
|
|
$id: http://devicetree.org/schemas/gpio/gpio-mvebu.yaml#
|
|
$schema: http://devicetree.org/meta-schemas/core.yaml#
|
|
|
|
title: Marvell EBU GPIO controller
|
|
|
|
maintainers:
|
|
- Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
|
|
- Andrew Lunn <andrew@lunn.ch>
|
|
|
|
properties:
|
|
compatible:
|
|
oneOf:
|
|
- enum:
|
|
- marvell,armada-8k-gpio
|
|
- marvell,orion-gpio
|
|
|
|
- items:
|
|
- enum:
|
|
- marvell,mv78200-gpio
|
|
- marvell,armada-370-gpio
|
|
- const: marvell,orion-gpio
|
|
|
|
- description: Deprecated binding
|
|
items:
|
|
- const: marvell,armadaxp-gpio
|
|
- const: marvell,orion-gpio
|
|
deprecated: true
|
|
|
|
reg:
|
|
description: |
|
|
Address and length of the register set for the device. Not used for
|
|
marvell,armada-8k-gpio.
|
|
|
|
A second entry can be provided, for the PWM function using the GPIO Blink
|
|
Counter on/off registers.
|
|
minItems: 1
|
|
maxItems: 2
|
|
|
|
reg-names:
|
|
items:
|
|
- const: gpio
|
|
- const: pwm
|
|
minItems: 1
|
|
|
|
offset:
|
|
$ref: /schemas/types.yaml#/definitions/uint32
|
|
description: Offset in the register map for the gpio registers (in bytes)
|
|
|
|
interrupts:
|
|
description: |
|
|
The list of interrupts that are used for all the pins managed by this
|
|
GPIO bank. There can be more than one interrupt (example: 1 interrupt
|
|
per 8 pins on Armada XP, which means 4 interrupts per bank of 32
|
|
GPIOs).
|
|
minItems: 1
|
|
maxItems: 4
|
|
|
|
interrupt-controller: true
|
|
|
|
"#interrupt-cells":
|
|
const: 2
|
|
|
|
gpio-controller: true
|
|
|
|
ngpios:
|
|
minimum: 1
|
|
maximum: 32
|
|
|
|
"#gpio-cells":
|
|
const: 2
|
|
|
|
marvell,pwm-offset:
|
|
$ref: /schemas/types.yaml#/definitions/uint32
|
|
description: Offset in the register map for the pwm registers (in bytes)
|
|
|
|
"#pwm-cells":
|
|
description:
|
|
The first cell is the GPIO line number. The second cell is the period
|
|
in nanoseconds.
|
|
const: 2
|
|
|
|
clocks:
|
|
description:
|
|
Clock(s) used for PWM function.
|
|
items:
|
|
- description: Core clock
|
|
- description: AXI bus clock
|
|
minItems: 1
|
|
|
|
clock-names:
|
|
items:
|
|
- const: core
|
|
- const: axi
|
|
minItems: 1
|
|
|
|
required:
|
|
- compatible
|
|
- gpio-controller
|
|
- ngpios
|
|
- "#gpio-cells"
|
|
|
|
allOf:
|
|
- if:
|
|
properties:
|
|
compatible:
|
|
contains:
|
|
const: marvell,armada-8k-gpio
|
|
then:
|
|
required:
|
|
- offset
|
|
else:
|
|
required:
|
|
- reg
|
|
|
|
unevaluatedProperties: true
|
|
|
|
examples:
|
|
- |
|
|
gpio@d0018100 {
|
|
compatible = "marvell,armadaxp-gpio", "marvell,orion-gpio";
|
|
reg = <0xd0018100 0x40>, <0xd0018800 0x30>;
|
|
ngpios = <32>;
|
|
gpio-controller;
|
|
#gpio-cells = <2>;
|
|
interrupt-controller;
|
|
#interrupt-cells = <2>;
|
|
interrupts = <16>, <17>, <18>, <19>;
|
|
};
|
|
|
|
- |
|
|
gpio@18140 {
|
|
compatible = "marvell,armada-370-gpio", "marvell,orion-gpio";
|
|
reg = <0x18140 0x40>, <0x181c8 0x08>;
|
|
reg-names = "gpio", "pwm";
|
|
ngpios = <17>;
|
|
gpio-controller;
|
|
#gpio-cells = <2>;
|
|
#pwm-cells = <2>;
|
|
interrupt-controller;
|
|
#interrupt-cells = <2>;
|
|
interrupts = <87>, <88>, <89>;
|
|
clocks = <&coreclk 0>;
|
|
};
|