108 lines
3.3 KiB
Plaintext
108 lines
3.3 KiB
Plaintext
Binding for Texas Instruments gate clock.
|
|
|
|
Binding status: Unstable - ABI compatibility may be broken in the future
|
|
|
|
This binding uses the common clock binding[1]. This clock is
|
|
quite much similar to the basic gate-clock [2], however,
|
|
it supports a number of additional features. If no register
|
|
is provided for this clock, the code assumes that a clockdomain
|
|
will be controlled instead and the corresponding hw-ops for
|
|
that is used.
|
|
|
|
[1] Documentation/devicetree/bindings/clock/clock-bindings.txt
|
|
[2] Documentation/devicetree/bindings/clock/gpio-gate-clock.yaml
|
|
[3] Documentation/devicetree/bindings/clock/ti/clockdomain.txt
|
|
|
|
Required properties:
|
|
- compatible : shall be one of:
|
|
"ti,gate-clock" - basic gate clock
|
|
"ti,wait-gate-clock" - gate clock which waits until clock is active before
|
|
returning from clk_enable()
|
|
"ti,dss-gate-clock" - gate clock with DSS specific hardware handling
|
|
"ti,am35xx-gate-clock" - gate clock with AM35xx specific hardware handling
|
|
"ti,clkdm-gate-clock" - clockdomain gate clock, which derives its functional
|
|
clock directly from a clockdomain, see [3] how
|
|
to map clockdomains properly
|
|
"ti,hsdiv-gate-clock" - gate clock with OMAP36xx specific hardware handling,
|
|
required for a hardware errata
|
|
"ti,composite-gate-clock" - composite gate clock, to be part of composite
|
|
clock
|
|
"ti,composite-no-wait-gate-clock" - composite gate clock that does not wait
|
|
for clock to be active before returning
|
|
from clk_enable()
|
|
- #clock-cells : from common clock binding; shall be set to 0
|
|
- clocks : link to phandle of parent clock
|
|
- reg : offset for register controlling adjustable gate, not needed for
|
|
ti,clkdm-gate-clock type
|
|
|
|
Optional properties:
|
|
- clock-output-names : from common clock binding.
|
|
- ti,bit-shift : bit shift for programming the clock gate, invalid for
|
|
ti,clkdm-gate-clock type
|
|
- ti,set-bit-to-disable : inverts default gate programming. Setting the bit
|
|
gates the clock and clearing the bit ungates the clock.
|
|
|
|
Examples:
|
|
mmchs2_fck: mmchs2_fck@48004a00 {
|
|
#clock-cells = <0>;
|
|
compatible = "ti,gate-clock";
|
|
clocks = <&core_96m_fck>;
|
|
reg = <0x0a00>;
|
|
ti,bit-shift = <25>;
|
|
};
|
|
|
|
uart4_fck_am35xx: uart4_fck_am35xx {
|
|
#clock-cells = <0>;
|
|
compatible = "ti,wait-gate-clock";
|
|
clocks = <&core_48m_fck>;
|
|
reg = <0x0a00>;
|
|
ti,bit-shift = <23>;
|
|
};
|
|
|
|
dss1_alwon_fck_3430es2: dss1_alwon_fck_3430es2@48004e00 {
|
|
#clock-cells = <0>;
|
|
compatible = "ti,dss-gate-clock";
|
|
clocks = <&dpll4_m4x2_ck>;
|
|
reg = <0x0e00>;
|
|
ti,bit-shift = <0>;
|
|
};
|
|
|
|
emac_ick: emac_ick@4800259c {
|
|
#clock-cells = <0>;
|
|
compatible = "ti,am35xx-gate-clock";
|
|
clocks = <&ipss_ick>;
|
|
reg = <0x059c>;
|
|
ti,bit-shift = <1>;
|
|
};
|
|
|
|
emu_src_ck: emu_src_ck {
|
|
#clock-cells = <0>;
|
|
compatible = "ti,clkdm-gate-clock";
|
|
clocks = <&emu_src_mux_ck>;
|
|
};
|
|
|
|
dpll4_m2x2_ck: dpll4_m2x2_ck@48004d00 {
|
|
#clock-cells = <0>;
|
|
compatible = "ti,hsdiv-gate-clock";
|
|
clocks = <&dpll4_m2x2_mul_ck>;
|
|
ti,bit-shift = <0x1b>;
|
|
reg = <0x0d00>;
|
|
ti,set-bit-to-disable;
|
|
};
|
|
|
|
vlynq_gate_fck: vlynq_gate_fck {
|
|
#clock-cells = <0>;
|
|
compatible = "ti,composite-gate-clock";
|
|
clocks = <&core_ck>;
|
|
ti,bit-shift = <3>;
|
|
reg = <0x0200>;
|
|
};
|
|
|
|
sys_clkout2_src_gate: sys_clkout2_src_gate {
|
|
#clock-cells = <0>;
|
|
compatible = "ti,composite-no-wait-gate-clock";
|
|
clocks = <&core_ck>;
|
|
ti,bit-shift = <15>;
|
|
reg = <0x0070>;
|
|
};
|