235 lines
11 KiB
Plaintext
235 lines
11 KiB
Plaintext
Marvell Armada CP110 System Controller
|
|
======================================
|
|
|
|
The CP110 is one of the two core HW blocks of the Marvell Armada 7K/8K
|
|
SoCs. It contains system controllers, which provide several registers
|
|
giving access to numerous features: clocks, pin-muxing and many other
|
|
SoC configuration items. This DT binding allows to describe these
|
|
system controllers.
|
|
|
|
For the top level node:
|
|
- compatible: must be: "syscon", "simple-mfd";
|
|
- reg: register area of the CP110 system controller
|
|
|
|
SYSTEM CONTROLLER 0
|
|
===================
|
|
|
|
Clocks:
|
|
-------
|
|
|
|
The Device Tree node representing this System Controller 0 provides a
|
|
number of clocks:
|
|
|
|
- a set of core clocks
|
|
- a set of gatable clocks
|
|
|
|
Those clocks can be referenced by other Device Tree nodes using two
|
|
cells:
|
|
- The first cell must be 0 or 1. 0 for the core clocks and 1 for the
|
|
gatable clocks.
|
|
- The second cell identifies the particular core clock or gatable
|
|
clocks.
|
|
|
|
The following clocks are available:
|
|
- Core clocks
|
|
- 0 0 APLL
|
|
- 0 1 PPv2 core
|
|
- 0 2 EIP
|
|
- 0 3 Core
|
|
- 0 4 NAND core
|
|
- 0 5 SDIO core
|
|
- Gatable clocks
|
|
- 1 0 Audio
|
|
- 1 1 Comm Unit
|
|
- 1 2 NAND
|
|
- 1 3 PPv2
|
|
- 1 4 SDIO
|
|
- 1 5 MG Domain
|
|
- 1 6 MG Core
|
|
- 1 7 XOR1
|
|
- 1 8 XOR0
|
|
- 1 9 GOP DP
|
|
- 1 11 PCIe x1 0
|
|
- 1 12 PCIe x1 1
|
|
- 1 13 PCIe x4
|
|
- 1 14 PCIe / XOR
|
|
- 1 15 SATA
|
|
- 1 16 SATA USB
|
|
- 1 17 Main
|
|
- 1 18 SD/MMC/GOP
|
|
- 1 21 Slow IO (SPI, NOR, BootROM, I2C, UART)
|
|
- 1 22 USB3H0
|
|
- 1 23 USB3H1
|
|
- 1 24 USB3 Device
|
|
- 1 25 EIP150
|
|
- 1 26 EIP197
|
|
|
|
Required properties:
|
|
|
|
- compatible: must be:
|
|
"marvell,cp110-clock"
|
|
- #clock-cells: must be set to 2
|
|
|
|
Pinctrl:
|
|
--------
|
|
|
|
For common binding part and usage, refer to the file
|
|
Documentation/devicetree/bindings/pinctrl/marvell,mvebu-pinctrl.txt.
|
|
|
|
Required properties:
|
|
|
|
- compatible: "marvell,armada-7k-pinctrl", "marvell,armada-8k-cpm-pinctrl",
|
|
"marvell,armada-8k-cps-pinctrl" or "marvell,cp115-standalone-pinctrl"
|
|
depending on the specific variant of the SoC being used.
|
|
|
|
Available mpp pins/groups and functions:
|
|
Note: brackets (x) are not part of the mpp name for marvell,function and given
|
|
only for more detailed description in this document.
|
|
|
|
name pins functions
|
|
================================================================================
|
|
mpp0 0 gpio, dev(ale1), au(i2smclk), ge0(rxd3), tdm(pclk), ptp(pulse), mss_i2c(sda), uart0(rxd), sata0(present_act), ge(mdio)
|
|
mpp1 1 gpio, dev(ale0), au(i2sdo_spdifo), ge0(rxd2), tdm(drx), ptp(clk), mss_i2c(sck), uart0(txd), sata1(present_act), ge(mdc)
|
|
mpp2 2 gpio, dev(ad15), au(i2sextclk), ge0(rxd1), tdm(dtx), mss_uart(rxd), ptp(pclk_out), i2c1(sck), uart1(rxd), sata0(present_act), xg(mdc)
|
|
mpp3 3 gpio, dev(ad14), au(i2slrclk), ge0(rxd0), tdm(fsync), mss_uart(txd), pcie(rstoutn), i2c1(sda), uart1(txd), sata1(present_act), xg(mdio)
|
|
mpp4 4 gpio, dev(ad13), au(i2sbclk), ge0(rxctl), tdm(rstn), mss_uart(rxd), uart1(cts), pcie0(clkreq), uart3(rxd), ge(mdc)
|
|
mpp5 5 gpio, dev(ad12), au(i2sdi), ge0(rxclk), tdm(intn), mss_uart(txd), uart1(rts), pcie1(clkreq), uart3(txd), ge(mdio)
|
|
mpp6 6 gpio, dev(ad11), ge0(txd3), spi0(csn2), au(i2sextclk), sata1(present_act), pcie2(clkreq), uart0(rxd), ptp(pulse)
|
|
mpp7 7 gpio, dev(ad10), ge0(txd2), spi0(csn1), spi1(csn1), sata0(present_act), led(data), uart0(txd), ptp(clk)
|
|
mpp8 8 gpio, dev(ad9), ge0(txd1), spi0(csn0), spi1(csn0), uart0(cts), led(stb), uart2(rxd), ptp(pclk_out), synce1(clk)
|
|
mpp9 9 gpio, dev(ad8), ge0(txd0), spi0(mosi), spi1(mosi), pcie(rstoutn), synce2(clk)
|
|
mpp10 10 gpio, dev(readyn), ge0(txctl), spi0(miso), spi1(miso), uart0(cts), sata1(present_act)
|
|
mpp11 11 gpio, dev(wen1), ge0(txclkout), spi0(clk), spi1(clk), uart0(rts), led(clk), uart2(txd), sata0(present_act)
|
|
mpp12 12 gpio, dev(clk_out), nf(rbn1), spi1(csn1), ge0(rxclk)
|
|
mpp13 13 gpio, dev(burstn), nf(rbn0), spi1(miso), ge0(rxctl), mss_spi(miso)
|
|
mpp14 14 gpio, dev(bootcsn), dev(csn0), spi1(csn0), spi0(csn3), au(i2sextclk), spi0(miso), sata0(present_act), mss_spi(csn)
|
|
mpp15 15 gpio, dev(ad7), spi1(mosi), spi0(mosi), mss_spi(mosi), ptp(pulse_cp2cp)
|
|
mpp16 16 gpio, dev(ad6), spi1(clk), mss_spi(clk)
|
|
mpp17 17 gpio, dev(ad5), ge0(txd3)
|
|
mpp18 18 gpio, dev(ad4), ge0(txd2), ptp(clk_cp2cp)
|
|
mpp19 19 gpio, dev(ad3), ge0(txd1), wakeup(out_cp2cp)
|
|
mpp20 20 gpio, dev(ad2), ge0(txd0)
|
|
mpp21 21 gpio, dev(ad1), ge0(txctl), sei(in_cp2cp)
|
|
mpp22 22 gpio, dev(ad0), ge0(txclkout), wakeup(in_cp2cp)
|
|
mpp23 23 gpio, dev(a1), au(i2smclk), link(rd_in_cp2cp)
|
|
mpp24 24 gpio, dev(a0), au(i2slrclk)
|
|
mpp25 25 gpio, dev(oen), au(i2sdo_spdifo)
|
|
mpp26 26 gpio, dev(wen0), au(i2sbclk)
|
|
mpp27 27 gpio, dev(csn0), spi1(miso), mss_gpio4, ge0(rxd3), spi0(csn4), ge(mdio), sata0(present_act), uart0(rts), rei(in_cp2cp)
|
|
mpp28 28 gpio, dev(csn1), spi1(csn0), mss_gpio5, ge0(rxd2), spi0(csn5), pcie2(clkreq), ptp(pulse), ge(mdc), sata1(present_act), uart0(cts), led(data)
|
|
mpp29 29 gpio, dev(csn2), spi1(mosi), mss_gpio6, ge0(rxd1), spi0(csn6), pcie1(clkreq), ptp(clk), mss_i2c(sda), sata0(present_act), uart0(rxd), led(stb)
|
|
mpp30 30 gpio, dev(csn3), spi1(clk), mss_gpio7, ge0(rxd0), spi0(csn7), pcie0(clkreq), ptp(pclk_out), mss_i2c(sck), sata1(present_act), uart0(txd), led(clk)
|
|
mpp31 31 gpio, dev(a2), mss_gpio4, pcie(rstoutn), ge(mdc)
|
|
mpp32 32 gpio, mii(col), mii(txerr), mss_spi(miso), tdm(drx), au(i2sextclk), au(i2sdi), ge(mdio), sdio(v18_en), pcie1(clkreq), mss_gpio0
|
|
mpp33 33 gpio, mii(txclk), sdio(pwr10), mss_spi(csn), tdm(fsync), au(i2smclk), sdio(bus_pwr), xg(mdio), pcie2(clkreq), mss_gpio1
|
|
mpp34 34 gpio, mii(rxerr), sdio(pwr11), mss_spi(mosi), tdm(dtx), au(i2slrclk), sdio(wr_protect), ge(mdc), pcie0(clkreq), mss_gpio2
|
|
mpp35 35 gpio, sata1(present_act), i2c1(sda), mss_spi(clk), tdm(pclk), au(i2sdo_spdifo), sdio(card_detect), xg(mdio), ge(mdio), pcie(rstoutn), mss_gpio3
|
|
mpp36 36 gpio, synce2(clk), i2c1(sck), ptp(clk), synce1(clk), au(i2sbclk), sata0(present_act), xg(mdc), ge(mdc), pcie2(clkreq), mss_gpio5
|
|
mpp37 37 gpio, uart2(rxd), i2c0(sck), ptp(pclk_out), tdm(intn), mss_i2c(sck), sata1(present_act), ge(mdc), xg(mdc), pcie1(clkreq), mss_gpio6, link(rd_out_cp2cp)
|
|
mpp38 38 gpio, uart2(txd), i2c0(sda), ptp(pulse), tdm(rstn), mss_i2c(sda), sata0(present_act), ge(mdio), xg(mdio), au(i2sextclk), mss_gpio7, ptp(pulse_cp2cp)
|
|
mpp39 39 gpio, sdio(wr_protect), au(i2sbclk), ptp(clk), spi0(csn1), sata1(present_act), mss_gpio0
|
|
mpp40 40 gpio, sdio(pwr11), synce1(clk), mss_i2c(sda), au(i2sdo_spdifo), ptp(pclk_out), spi0(clk), uart1(txd), ge(mdio), sata0(present_act), mss_gpio1
|
|
mpp41 41 gpio, sdio(pwr10), sdio(bus_pwr), mss_i2c(sck), au(i2slrclk), ptp(pulse), spi0(mosi), uart1(rxd), ge(mdc), sata1(present_act), mss_gpio2, rei(out_cp2cp)
|
|
mpp42 42 gpio, sdio(v18_en), sdio(wr_protect), synce2(clk), au(i2smclk), mss_uart(txd), spi0(miso), uart1(cts), xg(mdc), sata0(present_act), mss_gpio4
|
|
mpp43 43 gpio, sdio(card_detect), synce1(clk), au(i2sextclk), mss_uart(rxd), spi0(csn0), uart1(rts), xg(mdio), sata1(present_act), mss_gpio5, wakeup(out_cp2cp)
|
|
mpp44 44 gpio, ge1(txd2), uart0(rts), ptp(clk_cp2cp)
|
|
mpp45 45 gpio, ge1(txd3), uart0(txd), pcie(rstoutn)
|
|
mpp46 46 gpio, ge1(txd1), uart1(rts)
|
|
mpp47 47 gpio, ge1(txd0), spi1(clk), uart1(txd), ge(mdc)
|
|
mpp48 48 gpio, ge1(txctl_txen), spi1(mosi), xg(mdc), wakeup(in_cp2cp)
|
|
mpp49 49 gpio, ge1(txclkout), mii(crs), spi1(miso), uart1(rxd), ge(mdio), pcie0(clkreq), sdio(v18_en), sei(out_cp2cp)
|
|
mpp50 50 gpio, ge1(rxclk), mss_i2c(sda), spi1(csn0), uart2(txd), uart0(rxd), xg(mdio), sdio(pwr11)
|
|
mpp51 51 gpio, ge1(rxd0), mss_i2c(sck), spi1(csn1), uart2(rxd), uart0(cts), sdio(pwr10)
|
|
mpp52 52 gpio, ge1(rxd1), synce1(clk), synce2(clk), spi1(csn2), uart1(cts), led(clk), pcie(rstoutn), pcie0(clkreq)
|
|
mpp53 53 gpio, ge1(rxd2), ptp(clk), spi1(csn3), uart1(rxd), led(stb), sdio(led)
|
|
mpp54 54 gpio, ge1(rxd3), synce2(clk), ptp(pclk_out), synce1(clk), led(data), sdio(hw_rst), sdio_wp(wr_protect)
|
|
mpp55 55 gpio, ge1(rxctl_rxdv), ptp(pulse), sdio(led), sdio_cd(card_detect)
|
|
mpp56 56 gpio, tdm(drx), au(i2sdo_spdifo), spi0(clk), uart1(rxd), sata1(present_act), sdio(clk)
|
|
mpp57 57 gpio, mss_i2c(sda), ptp(pclk_out), tdm(intn), au(i2sbclk), spi0(mosi), uart1(txd), sata0(present_act), sdio(cmd)
|
|
mpp58 58 gpio, mss_i2c(sck), ptp(clk), tdm(rstn), au(i2sdi), spi0(miso), uart1(cts), led(clk), sdio(d0)
|
|
mpp59 59 gpio, mss_gpio7, synce2(clk), tdm(fsync), au(i2slrclk), spi0(csn0), uart0(cts), led(stb), uart1(txd), sdio(d1)
|
|
mpp60 60 gpio, mss_gpio6, ptp(pulse), tdm(dtx), au(i2smclk), spi0(csn1), uart0(rts), led(data), uart1(rxd), sdio(d2)
|
|
mpp61 61 gpio, mss_gpio5, ptp(clk), tdm(pclk), au(i2sextclk), spi0(csn2), uart0(txd), uart2(txd), sata1(present_act), ge(mdio), sdio(d3)
|
|
mpp62 62 gpio, mss_gpio4, synce1(clk), ptp(pclk_out), sata1(present_act), spi0(csn3), uart0(rxd), uart2(rxd), sata0(present_act), ge(mdc)
|
|
|
|
GPIO:
|
|
-----
|
|
|
|
For common binding part and usage, refer to
|
|
Documentation/devicetree/bindings/gpio/gpio-mvebu.yaml.
|
|
|
|
Required properties:
|
|
|
|
- compatible: "marvell,armada-8k-gpio"
|
|
|
|
- offset: offset address inside the syscon block
|
|
|
|
Example:
|
|
|
|
CP110_LABEL(syscon0): system-controller@440000 {
|
|
compatible = "syscon", "simple-mfd";
|
|
reg = <0x440000 0x1000>;
|
|
|
|
CP110_LABEL(clk): clock {
|
|
compatible = "marvell,cp110-clock";
|
|
#clock-cells = <2>;
|
|
};
|
|
|
|
CP110_LABEL(pinctrl): pinctrl {
|
|
compatible = "marvell,armada-8k-cpm-pinctrl";
|
|
};
|
|
|
|
CP110_LABEL(gpio1): gpio@100 {
|
|
compatible = "marvell,armada-8k-gpio";
|
|
offset = <0x100>;
|
|
ngpios = <32>;
|
|
gpio-controller;
|
|
#gpio-cells = <2>;
|
|
gpio-ranges = <&CP110_LABEL(pinctrl) 0 0 32>;
|
|
};
|
|
|
|
};
|
|
|
|
SYSTEM CONTROLLER 1
|
|
===================
|
|
|
|
Thermal:
|
|
--------
|
|
|
|
The thermal IP can probe the temperature all around the processor. It
|
|
may feature several channels, each of them wired to one sensor.
|
|
|
|
It is possible to setup an overheat interrupt by giving at least one
|
|
critical point to any subnode of the thermal-zone node.
|
|
|
|
For common binding part and usage, refer to
|
|
Documentation/devicetree/bindings/thermal/thermal*.yaml
|
|
|
|
Required properties:
|
|
- compatible: must be one of:
|
|
* marvell,armada-cp110-thermal
|
|
- reg: register range associated with the thermal functions.
|
|
|
|
Optional properties:
|
|
- interrupts-extended: overheat interrupt handle. Should point to
|
|
a line of the ICU-SEI irqchip (116 is what is usually used by the
|
|
firmware). The ICU-SEI will redirect towards interrupt line #37 of the
|
|
AP SEI which is shared across all CPs.
|
|
See interrupt-controller/interrupts.txt
|
|
- #thermal-sensor-cells: shall be <1> when thermal-zones subnodes refer
|
|
to this IP and represents the channel ID. There is one sensor per
|
|
channel. O refers to the thermal IP internal channel.
|
|
|
|
Example:
|
|
CP110_LABEL(syscon1): system-controller@6f8000 {
|
|
compatible = "syscon", "simple-mfd";
|
|
reg = <0x6f8000 0x1000>;
|
|
|
|
CP110_LABEL(thermal): thermal-sensor@70 {
|
|
compatible = "marvell,armada-cp110-thermal";
|
|
reg = <0x70 0x10>;
|
|
interrupts-extended = <&CP110_LABEL(icu_sei) 116 IRQ_TYPE_LEVEL_HIGH>;
|
|
#thermal-sensor-cells = <1>;
|
|
};
|
|
};
|